Provided by: tigervnc-scraping-server_1.10.1+dfsg-3ubuntu0.20.04.1_amd64 
NAME
x0tigervncserver - TigerVNC Server for X displays
SYNOPSIS
x0tigervncserver [options]
x0tigervncserver -version
DESCRIPTION
x0tigervncserver is a TigerVNC Server which makes any X display remotely accessible via VNC, TigerVNC or
compatible viewers. Unlike Xvnc(1), it does not create a virtual display. Instead, it just shares an
existing X server (typically, that one connected to the physical screen).
XDamage will be used if the existing X server supports it. Otherwise x0tigervncserver will fall back to
polling the screen for changes.
OPTIONS
x0tigervncserver interprets the command line as a list of parameters with optional values. Running
x0vncserver -h will show a list of all valid parameters with short descriptions. All parameters are
optional, but normally you would have to use the PasswordFile parameter (see its description below).
There are several forms of specifying parameters in the command line (here we use `SomeParameter' as an
example parameter name):
-SomeParameter
Enable the parameter, turn the feature on. This form can be used with parameters that simply
enable or disable some feature.
-SomeParameter=0
Disable the parameter, turn the feature off.
-SomeParameter=value
Assign the specified value to the parameter. The leading dash can be omitted, or it can be
doubled if desired (like in GNU-style long options).
Parameter names are case-insensitive, their order in the command line can be arbitrary.
PARAMETERS
-display display
The X display name. If not specified, it defaults to the value of the DISPLAY environment
variable.
-rfbport port
Specifies the TCP port on which x0tigervncserver listens for connections from viewers (the
protocol used in VNC is called RFB - "remote framebuffer"). The default port is 5900.
-UseIPv4
Use IPv4 for incoming and outgoing connections. Default is on.
-UseIPv6
Use IPv6 for incoming and outgoing connections. Default is on.
-rfbunixpath path
Specifies the path of a Unix domain socket on which x0tigervncserver listens for connections from
viewers, instead of listening on a TCP port.
-rfbunixmode mode
Specifies the mode of the Unix domain socket. The default is 0600.
-Log logname:dest:level
Configures the debug log settings. dest can currently be stderr, stdout or syslog, and level is
between 0 and 100, 100 meaning most verbose output. logname is usually * meaning all, but you can
target a specific source file if you know the name of its "LogWriter". Default is *:stderr:30.
-HostsFile filename
This parameter allows one to specify a file name with IP access control rules. The file should
include one rule per line, and the rule format is one of the following: +address/prefix (accept
connections from the specified address group), -address/prefix (reject connections) or
?address/prefix (query the local user). The first rule matching the IP address determines the
action to be performed. Rules that include only an action sign (+, - or ?) will match any IP
address. Prefix is optional and is specified as a number of bits (e.g. /24). Default is to
accept connections from any IP address.
-SecurityTypes sec-types
Specify which security scheme to use for incoming connections. Valid values are a comma separated
list of None, VncAuth, Plain, TLSNone, TLSVnc, TLSPlain, X509None, X509Vnc and X509Plain. Default
is VncAuth,TLSVnc.
-rfbauth passwd-file, -PasswordFile passwd-file
Password file for VNC authentication. There is no default, you should specify the password file
explicitly. Password file should be created with the vncpasswd(1) utility. The file is accessed
each time a connection comes in, so it can be changed on the fly.
-Password password
Obfuscated binary encoding of the password which clients must supply to access the server. Using
this parameter is insecure, use PasswordFile parameter instead.
-PlainUsers user-list
A comma separated list of user names that are allowed to authenticate via any of the "Plain"
security types (Plain, TLSPlain, etc.). Specify * to allow any user to authenticate using this
security type. Default is to deny all users.
-pam_service name, -PAMService name
PAM service name to use when authentication users using any of the "Plain" security types. Default
is vnc.
-X509Cert path
Path to a X509 certificate in PEM format to be used for all X509 based security types (X509None,
X509Vnc, etc.).
-X509Key path
Private key counter part to the certificate given in X509Cert. Must also be in PEM format.
-GnuTLSPriority priority
GnuTLS priority string that controls the TLS session’s handshake algorithms. See the GnuTLS
manual for possible values. Default is NORMAL.
-UseBlacklist
Temporarily reject connections from a host if it repeatedly fails to authenticate. Default is on.
-BlacklistThreshold count
The number of unauthenticated connection attempts allowed from any individual host before that
host is black-listed. Default is 5.
-BlacklistTimeout seconds
The initial timeout applied when a host is first black-listed. The host cannot re-attempt a
connection until the timeout expires. Default is 10.
-QueryConnect
Prompts the user of the desktop to explicitly accept or reject incoming connections. Default is
off.
-QueryConnectTimeout seconds
Number of seconds to show the Accept Connection dialog before rejecting the connection. Default
is 10.
-localhost
Only allow connections from the same machine. Useful if you use SSH and want to stop non-SSH
connections from any other hosts.
-AlwaysShared
Always treat incoming connections as shared, regardless of the client-specified setting. Default
is off.
-NeverShared
Never treat incoming connections as shared, regardless of the client-specified setting. Default is
off.
-DisconnectClients
Disconnect existing clients if an incoming connection is non-shared. Default is on. If
DisconnectClients is false, then a new non-shared connection will be refused while there is a
client active. When combined with NeverShared this means only one client is allowed at a time.
-AcceptKeyEvents
Accept key press and release events from clients. Default is on.
-AcceptPointerEvents
Accept pointer press and release events from clients. Default is on.
-AcceptSetDesktopSize
Accept requests to resize the size of the desktop. Default is on.
-RemapKeys mapping
Sets up a keyboard mapping. mapping is a comma-separated string of character mappings, each of
the form char->char, or char<>char, where char is a hexadecimal keysym. For example, to exchange
the " and @ symbols you would specify the following:
RemapKeys=0x22<>0x40
-RawKeyboard
Send keyboard events straight through and avoid mapping them to the current keyboard layout. This
effectively makes the keyboard behave according to the layout configured on the server instead of
the layout configured on the client. Default is off.
-Protocol3.3
Always use protocol version 3.3 for backwards compatibility with badly-behaved clients. Default is
off.
-Geometry geometry
This option specifies the screen area that will be shown to VNC clients. The format is
widthxheight+xoffset+yoffset , where `+' signs can be replaced with `-' signs to specify offsets
from the right and/or from the bottom of the screen. Offsets are optional, +0+0 is assumed by
default (top left corner). If the argument is empty, full screen is shown to VNC clients (this is
the default).
-MaxProcessorUsage percent
Maximum percentage of CPU time to be consumed when polling the screen. Default is 35.
-PollingCycle milliseconds
Milliseconds per one polling cycle. Actual interval may be dynamically adjusted to satisfy
MaxProcessorUsage setting. Default is 30.
-FrameRate fps
The maximum number of updates per second sent to each client. If the screen updates any faster
then those changes will be aggregated and sent in a single update to the client. Note that this
only controls the maximum rate and a client may get a lower rate when resources are limited.
Default is 60.
-CompareFB mode
Perform pixel comparison on framebuffer to reduce unnecessary updates. Can be either 0 (off), 1
(always) or 2 (auto). Default is 2.
-UseSHM
Use MIT-SHM extension if available. Using that extension accelerates reading the screen. Default
is on.
-ZlibLevel level
Zlib compression level for ZRLE encoding (it does not affect Tight encoding). Acceptable values
are between 0 and 9. Default is to use the standard compression level provided by the zlib(3)
compression library.
-ImprovedHextile
Use improved compression algorithm for Hextile encoding which achieves better compression ratios
by the cost of using slightly more CPU time. Default is on.
-IdleTimeout seconds
The number of seconds after which an idle VNC connection will be dropped. Default is 0, which
means that idle connections will never be dropped.
-MaxDisconnectionTime seconds
Terminate when no client has been connected for N seconds. Default is 0.
-MaxConnectionTime seconds
Terminate when a client has been connected for N seconds. Default is 0.
-MaxIdleTime seconds
Terminate after N seconds of user inactivity. Default is 0.
-ClientWaitTimeMillis time
Time in milliseconds to wait for a viewer which is blocking the server. This is necessary because
the server is single-threaded and sometimes blocks until the viewer has finished sending or
receiving a message - note that this does not mean an update will be aborted after this time.
Default is 20000 (20 seconds).
-AcceptCutText
-SendCutText
-MaxCutText
Currently unused.
SEE ALSO
Xtigervnc(1), tigervncpasswd(1),
https://www.tigervnc.org/
AUTHOR
Constantin Kaplinsky and others.
VNC was originally developed by the RealVNC team while at Olivetti Research Ltd / AT&T Laboratories
Cambridge. TightVNC additions were implemented by Constantin Kaplinsky. Many other people have since
participated in development, testing and support. This manual is part of the TigerVNC software suite.
TigerVNC X0VNCSERVER(1)