Provided by: ocaml-man_4.08.1-8_all 
NAME
Float.Array - no description
Module
Module Float.Array
Documentation
Module Array
: sig end
type t = floatarray
The type of float arrays with packed representation.
Since 4.08.0
val length : t -> int
Return the length (number of elements) of the given floatarray.
val get : t -> int -> float
get a n returns the element number n of floatarray a .
Raise Invalid_argument if n is outside the range 0 to (length a - 1) .
val set : t -> int -> float -> unit
set a n x modifies floatarray a in place, replacing element number n with x .
Raise Invalid_argument if n is outside the range 0 to (length a - 1) .
val make : int -> float -> t
make n x returns a fresh floatarray of length n , initialized with x .
Raise Invalid_argument if n < 0 or n > Sys.max_floatarray_length .
val create : int -> t
create n returns a fresh floatarray of length n , with uninitialized data.
Raise Invalid_argument if n < 0 or n > Sys.max_floatarray_length .
val init : int -> (int -> float) -> t
init n f returns a fresh floatarray of length n , with element number i initialized to the
result of f i . In other terms, init n f tabulates the results of f applied to the
integers 0 to n-1 .
Raise Invalid_argument if n < 0 or n > Sys.max_floatarray_length .
val append : t -> t -> t
append v1 v2 returns a fresh floatarray containing the concatenation of the floatarrays v1
and v2 .
Raise Invalid_argument if length v1 + length v2 > Sys.max_floatarray_length .
val concat : t list -> t
Same as Float.Array.append , but concatenates a list of floatarrays.
val sub : t -> int -> int -> t
sub a start len returns a fresh floatarray of length len , containing the elements number
start to start + len - 1 of floatarray a .
Raise Invalid_argument if start and len do not designate a valid subarray of a ; that is,
if start < 0 , or len < 0 , or start + len > length a .
val copy : t -> t
copy a returns a copy of a , that is, a fresh floatarray containing the same elements as a
.
val fill : t -> int -> int -> float -> unit
fill a ofs len x modifies the floatarray a in place, storing x in elements number ofs to
ofs + len - 1 .
Raise Invalid_argument if ofs and len do not designate a valid subarray of a .
val blit : t -> int -> t -> int -> int -> unit
blit v1 o1 v2 o2 len copies len elements from floatarray v1 , starting at element number
o1 , to floatarray v2 , starting at element number o2 . It works correctly even if v1 and
v2 are the same floatarray, and the source and destination chunks overlap.
Raise Invalid_argument if o1 and len do not designate a valid subarray of v1 , or if o2
and len do not designate a valid subarray of v2 .
val to_list : t -> float list
to_list a returns the list of all the elements of a .
val of_list : float list -> t
of_list l returns a fresh floatarray containing the elements of l .
Raise Invalid_argument if the length of l is greater than Sys.max_floatarray_length .
Iterators
val iter : (float -> unit) -> t -> unit
iter f a applies function f in turn to all the elements of a . It is equivalent to f
a.(0); f a.(1); ...; f a.(length a - 1); () .
val iteri : (int -> float -> unit) -> t -> unit
Same as Float.Array.iter , but the function is applied with the index of the element as
first argument, and the element itself as second argument.
val map : (float -> float) -> t -> t
map f a applies function f to all the elements of a , and builds a floatarray with the
results returned by f .
val mapi : (int -> float -> float) -> t -> t
Same as Float.Array.map , but the function is applied to the index of the element as first
argument, and the element itself as second argument.
val fold_left : ('a -> float -> 'a) -> 'a -> t -> 'a
fold_left f x a computes f (... (f (f x a.(0)) a.(1)) ...) a.(n-1) , where n is the length
of the floatarray a .
val fold_right : (float -> 'a -> 'a) -> t -> 'a -> 'a
fold_right f a x computes f a.(0) (f a.(1) ( ... (f a.(n-1) x) ...)) , where n is the
length of the floatarray a .
Iterators on two arrays
val iter2 : (float -> float -> unit) -> t -> t -> unit
Array.iter2 f a b applies function f to all the elements of a and b . Raise
Invalid_argument if the floatarrays are not the same size.
val map2 : (float -> float -> float) -> t -> t -> t
map2 f a b applies function f to all the elements of a and b , and builds a floatarray
with the results returned by f : [| f a.(0) b.(0); ...; f a.(length a - 1) b.(length b -
1)|] . Raise Invalid_argument if the floatarrays are not the same size.
Array scanning
val for_all : (float -> bool) -> t -> bool
for_all p [|a1; ...; an|] checks if all elements of the floatarray satisfy the predicate p
. That is, it returns (p a1) && (p a2) && ... && (p an) .
val exists : (float -> bool) -> t -> bool
exists p [|a1; ...; an|] checks if at least one element of the floatarray satisfies the
predicate p . That is, it returns (p a1) || (p a2) || ... || (p an) .
val mem : float -> t -> bool
mem a l is true if and only if there is an element of l that is structurally equal to a ,
i.e. there is an x in l such that compare a x = 0 .
val mem_ieee : float -> t -> bool
Same as Float.Array.mem , but uses IEEE equality instead of structural equality.
Sorting
val sort : (float -> float -> int) -> t -> unit
Sort a floatarray in increasing order according to a comparison function. The comparison
function must return 0 if its arguments compare as equal, a positive integer if the first
is greater, and a negative integer if the first is smaller (see below for a complete
specification). For example, compare is a suitable comparison function. After calling
sort , the array is sorted in place in increasing order. sort is guaranteed to run in
constant heap space and (at most) logarithmic stack space.
The current implementation uses Heap Sort. It runs in constant stack space.
Specification of the comparison function: Let a be the floatarray and cmp the comparison
function. The following must be true for all x , y , z in a :
- cmp x y > 0 if and only if cmp y x < 0
- if cmp x y >= 0 and cmp y z >= 0 then cmp x z >= 0
When sort returns, a contains the same elements as before, reordered in such a way that
for all i and j valid indices of a :
- cmp a.(i) a.(j) >= 0 if and only if i >= j
val stable_sort : (float -> float -> int) -> t -> unit
Same as Float.Array.sort , but the sorting algorithm is stable (i.e. elements that
compare equal are kept in their original order) and not guaranteed to run in constant heap
space.
The current implementation uses Merge Sort. It uses a temporary floatarray of length n/2 ,
where n is the length of the floatarray. It is usually faster than the current
implementation of Float.Array.sort .
val fast_sort : (float -> float -> int) -> t -> unit
Same as Float.Array.sort or Float.Array.stable_sort , whichever is faster on typical
input.
Iterators
val to_seq : t -> float Seq.t
Iterate on the floatarray, in increasing order. Modifications of the floatarray during
iteration will be reflected in the iterator.
val to_seqi : t -> (int * float) Seq.t
Iterate on the floatarray, in increasing order, yielding indices along elements.
Modifications of the floatarray during iteration will be reflected in the iterator.
val of_seq : float Seq.t -> t
Create an array from the generator.
val map_to_array : (float -> 'a) -> t -> 'a array
map_to_array f a applies function f to all the elements of a , and builds an array with
the results returned by f : [| f a.(0); f a.(1); ...; f a.(length a - 1) |] .
val map_from_array : ('a -> float) -> 'a array -> t
map_from_array f a applies function f to all the elements of a , and builds a floatarray
with the results returned by f .
Undocumented functions
val unsafe_get : t -> int -> float
val unsafe_set : t -> int -> float -> unit