Provided by: libccrtp-doc_2.0.9-2.3build1_all 
NAME
RTPDataQueue - RTP data queue handler.
SYNOPSIS
#include <ioqueue.h>
Inherits IncomingDataQueue, and OutgoingDataQueue.
Inherited by QueueRTCPManager, and RTPDuplex.
Public Types
enum Tos { tosBestEffort, tosEnhanced }
Type of network service the application uses.
Public Member Functions
void setTypeOfService (Tos tos)
Specify the kind of service the application expects to use.
void enableStack ()
Enable packet queue processing in the stack.
void disableStack ()
Disable packet queue processing in the stack.
bool isActive () const
Get active connection state flag.
uint32 getCurrentTimestamp () const
Get the timestamp that should be given for a packet whose payload sampling instant corresponds to the
current system time.
void setSessionBandwidth (uint32 bw)
Specify the bandwidth of the current session.
uint32 getDefaultSessionBandwidth () const
uint32 getSessionBandwidth () const
void setTimeclock ()
Set the packet timeclock for synchronizing timestamps.
timeout_t getTimeclock () const
Get the packet timeclock for synchronizing timestamps.
Protected Member Functions
RTPDataQueue (uint32 size=defaultMembersHashSize)
Constructor.
RTPDataQueue (uint32 *ssrc, uint32 size=defaultMembersHashSize)
Using this constructor you can start a session with the given ssrc, instead of the usual randomly
generated one.
virtual ~RTPDataQueue ()
The queue destructor flushes the queue and stops all services.
virtual void timerTick ()
A plugin point for timer tick driven events.
void renewLocalSSRC ()
void endQueue ()
This method ends the queue.
virtual bool isPendingData (microtimeout_t timeout)=0
This function is used to check for and schedule against arriving packets based on the derived
connection type.
Additional Inherited Members
Detailed Description
RTP data queue handler.
A packet queue handler for building different kinds of RTP protocol systems. The queue manages both
incoming and outgoing RTP packets, as well as synchronization and transmission/reception timers. By
making the queue handler a seperate base class it becomes possible to define RTP classes for RTP profiles
and sessions of different types.
Outgoing packets are sent via the OutgoingDataQueue::putData method.
Incoming packets can be retrieved via IncomingDataQueue::getData method.
Author
David Sugar dyfet@ostel.com
Member Enumeration Documentation
enum RTPDataQueue::Tos
Type of network service the application uses. rtp.h cc++/rtp.h If the application uses enhanced network
service, for instance Integrated Services or Differentiated Services, it has not to ensure fair
competition with TCP, provided that the requested service is actually being delivered. Whenever the
application uses best-effort service or the requested enhanced service is not actually being delivered,
it has to ensure fair competition with TCP. By default, best-effot is assumed.
Note
Although not required, RTP packets are always sent on top of UDP segments. No other underlying
transport protocol is supported at present.
Enumerator
tosBestEffort
Best-effort network service.
tosEnhanced
Enhanced network service.
Constructor & Destructor Documentation
RTPDataQueue::RTPDataQueue (uint32 size = defaultMembersHashSize) [protected]
Constructor. This will generate a random application SSRC identifier.
Parameters
size an estimation of the number of participants in the session
RTPDataQueue::RTPDataQueue (uint32 * ssrc, uint32 size = defaultMembersHashSize) [protected]
Using this constructor you can start a session with the given ssrc, instead of the usual randomly
generated one. This is necessary when you need to initiate several sessions having the same SSRC
identifier, for instance, to implement layered encoding, in which case each layer is managed through a
different session but all sessions share the same SSRC identifier.
Warning
This doesn't seem to be a good solution
Parameters
ssrc Synchronization SouRCe identifier for this session
size an estimation of the number of participants in the session
virtual RTPDataQueue::~RTPDataQueue () [inline], [protected], [virtual]
The queue destructor flushes the queue and stops all services.
Member Function Documentation
void RTPDataQueue::disableStack () [inline]
Disable packet queue processing in the stack.
void RTPDataQueue::enableStack () [inline]
Enable packet queue processing in the stack. This method will not any thread of execution.
void RTPDataQueue::endQueue () [protected]
This method ends the queue.
uint32 RTPDataQueue::getCurrentTimestamp () const
Get the timestamp that should be given for a packet whose payload sampling instant corresponds to the
current system time. The timestamp applications should provide for each packet represents the sampling
instant of its payload and should not be a reading of the system clock. Nevertheless, the internal
operation of the RTP stack relies on the accuracy of the provided timestamp, since several computations
assume that there is a certain degree of correspondence between the timestamp and the system clock.
It is recommended that applications use this method in order to periodically adjust the RTP timestamp.
In particular, it is advisable getting the timestamp corresponding to the first sampling instant or any
instant after a period of inactivity through a call to this method.
Applications should use the nominal sampling or any other value provided by the coder in order to compute
the next timestamps with minimum computational requirement.
For instance, an application using an RTP profile that specifies a fixed sampling rate of 8 Khz with
eight bits per sample, continuously transmitting audio blocks 80 octets long, would transmit 100 packets
every second. Every packet would carry a timestamp 80 units greater than the previous one. So, the first
timestamp would be obtained from this method, whereas the following ones would be computed adding 80
every time. Also the timestamp should be increased for every block whether it is put in the queue or
dropped.
The aforementioned increment can be obtained from the RTPDataQueue::getTimestampIncrement() method rather
than computing it by hand in the application.
Note
Frame based applications must follow a specific timestamping method, probably specified in a profile.
You should take into account that by default ccRTP assumes that the application begins sampling at
the queue creation time. Moreover, the first sampling instant is assigned a 'user visible' timestamp
of 0, although the RTP stack will then add internally a ramdom offset unknown to the application.
That is to say, the application may count samples from 0 in order to get the timestamp for the next
packet, provided that the first sampling instant is the same as the queue creation time.
Nevertheless, this simpler way of starting will not be as accurate as it would be if the application
got at least the first timestamp through getCurrentTimestamp. We provide this option since ccRTP
interface is evolving, but we admit that it is ugly, we could remove this option or even replace
uint32 timestamps with a restrictively regulated object; suggestions are gladly welcomed
Examples
rtphello.cpp.
uint32 RTPDataQueue::getDefaultSessionBandwidth () const [inline]
uint32 RTPDataQueue::getSessionBandwidth () const [inline]
timeout_t RTPDataQueue::getTimeclock () const [inline]
Get the packet timeclock for synchronizing timestamps.
Returns
runtime in milliseconds since last set.
bool RTPDataQueue::isActive () const [inline]
Get active connection state flag.
Returns
true if connection 'active'.
Examples
audiorx.cpp, audiotx.cpp, and rtphello.cpp.
virtual bool RTPDataQueue::isPendingData (microtimeout_t timeout) [protected], [pure virtual]
This function is used to check for and schedule against arriving packets based on the derived connection
type.
Returns
true if packet waiting for processing.
Parameters
number of microseconds to wait.
Implemented in SingleThreadRTPSession< RTPDataChannel, RTCPChannel, ServiceQueue >, TRTPSessionBase<
RTPDataChannel, RTCPChannel, ServiceQueue >, TRTPSessionBase< DualRTPUDPIPv4Channel,
DualRTPUDPIPv4Channel, AVPQueue >, and RTPDuplex.
void RTPDataQueue::renewLocalSSRC () [inline], [protected], [virtual]
Reimplemented from RTPQueueBase.
void RTPDataQueue::setSessionBandwidth (uint32 bw) [inline]
Specify the bandwidth of the current session.
Parameters
bw bandwidth of the current session, in bits/s.
See also
AVPQueue::setControlBandwidth()
void RTPDataQueue::setTimeclock () [inline]
Set the packet timeclock for synchronizing timestamps.
void RTPDataQueue::setTypeOfService (Tos tos) [inline]
Specify the kind of service the application expects to use.
Parameters
tos type of service the application expects to use
Note
If enhanced service is specified but packet loss is high (the requested service does not appear to
actually be delivered) ccRTP defaults to best-effort suitable behaviour: guarantee fair competition
with TCP.
virtual void RTPDataQueue::timerTick () [inline], [protected], [virtual]
A plugin point for timer tick driven events.
Reimplemented in SingleThreadRTPSession< RTPDataChannel, RTCPChannel, ServiceQueue >.
Author
Generated automatically by Doxygen for ccRTP from the source code.