Provided by: erlang-manpages_22.2.7+dfsg-1ubuntu0.2_all 
NAME
ssh - Main API of the ssh application
DESCRIPTION
This is the interface module for the SSH application. The Secure Shell (SSH) Protocol is a protocol for
secure remote login and other secure network services over an insecure network. See ssh(7) for details of
supported RFCs, versions, algorithms and unicode handling.
With the SSH application it is possible to start clients and to start daemons (servers).
Clients are started with connect/2, connect/3 or connect/4. They open an encrypted connection on top of
TCP/IP. In that encrypted connection one or more channels could be opened with
ssh_connection:session_channel/2,4.
Each channel is an isolated "pipe" between a client-side process and a server-side process. Those process
pairs could handle for example file transfers (sftp) or remote command execution (shell, exec and/or
cli). If a custom shell is implemented, the user of the client could execute the special commands
remotely. Note that the user is not necessarily a human but probably a system interfacing the SSH app.
A server-side subssystem (channel) server is requested by the client with ssh_connection:subsystem/4.
A server (daemon) is started with daemon/1, daemon/2 or daemon/3. Possible channel handlers (subsystems)
are declared with the subsystem option when the daemon is started.
To just run a shell on a remote machine, there are functions that bundles the needed three steps needed
into one: shell/1,2,3. Similarily, to just open an sftp (file transfer) connection to a remote machine,
the simplest way is to use ssh_sftp:start_channel/1,2,3.
To write your own client channel handler, use the behaviour ssh_client_channel. For server channel
handlers use ssh_server_channel behaviour (replaces ssh_daemon_channel).
Both clients and daemons accepts options that controls the exact behaviour. Some options are common to
both. The three sets are called Client Options, Daemon Options and Common Options.
The descriptions of the options uses the Erlang Type Language with explaining text.
Note:
The User's Guide has examples and a Getting Started section.
KEYS AND FILES
A number of objects must be present for the SSH application to work. Thoose objects are per default
stored in files. The default names, paths and file formats are the same as for OpenSSH. Keys could be
generated with the ssh-keygen program from OpenSSH. See the User's Guide.
The paths could easily be changed by options: user_dir and system_dir.
A completly different storage could be interfaced by writing call-back modules using the behaviours
ssh_client_key_api and/or ssh_server_key_api. A callback module is installed with the option key_cb to
the client and/or the daemon.
Daemons
The keys are by default stored in files:
* Mandatory: one or more Host key(s) , both private and public. Default is to store them in the
directory /etc/ssh in the files
* ssh_host_dsa_key and ssh_host_dsa_key.pub
* ssh_host_rsa_key and ssh_host_rsa_key.pub
* ssh_host_ecdsa_key and ssh_host_ecdsa_key.pub
The host keys directory could be changed with the option system_dir.
* Optional: one or more User's public key in case of publickey authorization. Default is to store them
concatenated in the file .ssh/authorized_keys in the user's home directory.
The user keys directory could be changed with the option user_dir.
Clients
The keys and some other data are by default stored in files in the directory .ssh in the user's home
directory.
The directory could be changed with the option user_dir.
* Optional: a list of Host public key(s) for previously connected hosts. This list is handled by the
SSH application without any need of user assistance. The default is to store them in the file
known_hosts.
The host_accepting_client_options() are associated with this list of keys.
* Optional: one or more User's private key(s) in case of publickey authorization. The default files
are
* id_dsa and id_dsa.pub
* id_rsa and id_rsa.pub
* id_ecdsa and id_ecdsa.pub
DATA TYPES
Client Options
client_options() = [client_option()]
client_option() =
ssh_file:pubkey_passphrase_client_options() |
host_accepting_client_options() |
authentication_client_options() |
diffie_hellman_group_exchange_client_option() |
connect_timeout_client_option() |
recv_ext_info_client_option() |
opaque_client_options() |
gen_tcp:connect_option() |
common_option()
Options for clients. The individual options are further explained below or by following the
hyperlinks.
host_accepting_client_options() =
{silently_accept_hosts, accept_hosts()} |
{user_interaction, boolean()} |
{save_accepted_host, boolean()} |
{quiet_mode, boolean()}
accept_hosts() =
boolean() |
accept_callback() |
{HashAlgoSpec :: fp_digest_alg(), accept_callback()}
fp_digest_alg() = md5 | crypto:sha1() | crypto:sha2()
accept_callback() =
fun((PeerName :: string(), fingerprint()) -> boolean())
fingerprint() = string() | [string()]
silently_accept_hosts:
This option guides the connect function on how to act when the connected server presents a
Host Key that the client has not seen before. The default is to ask the user with a question
on stdio of whether to accept or reject the new Host Key. See the option user_dir for
specifying the path to the file known_hosts where previously accepted Host Keys are recorded.
See also the option key_cb for the general way to handle keys.
The option can be given in three different forms as seen above:
* The value is a boolean(). The value true will make the client accept any unknown Host Key
without any user interaction. The value false preserves the default behaviour of asking the
user on stdio.
* An accept_callback() will be called and the boolean return value true will make the client
accept the Host Key. A return value of false will make the client to reject the Host Key and
as a result the connection will be closed. The arguments to the fun are:
* PeerName - a string with the name or address of the remote host.
* FingerPrint - the fingerprint of the Host Key as public_key:ssh_hostkey_fingerprint/1
calculates it.
* A tuple {HashAlgoSpec, accept_callback}. The HashAlgoSpec specifies which hash algorithm
shall be used to calculate the fingerprint used in the call of the accept_callback(). The
HashALgoSpec is either an atom or a list of atoms as the first argument in
public_key:ssh_hostkey_fingerprint/2. If it is a list of hash algorithm names, the
FingerPrint argument in the accept_callback() will be a list of fingerprints in the same
order as the corresponding name in the HashAlgoSpec list.
user_interaction:
If false, disables the client to connect to the server if any user interaction is needed, such
as accepting the server to be added to the known_hosts file, or supplying a password.
Even if user interaction is allowed it can be suppressed by other options, such as
silently_accept_hosts and password. However, those options are not always desirable to use
from a security point of view.
Defaults to true.
save_accepted_host:
If true, the client saves an accepted host key to avoid the accept question the next time the
same host is connected. If the option key_cb is not present, the key is saved in the file
"known_hosts". See option user_dir for the location of that file.
If false, the key is not saved and the key will still be unknown at the next access of the
same host.
Defaults to true
quiet_mode:
If true, the client does not print anything on authorization.
Defaults to false
authentication_client_options() =
{user, string()} | {password, string()}
user:
Provides the username. If this option is not given, ssh reads from the environment (LOGNAME or
USER on UNIX, USERNAME on Windows).
password:
Provides a password for password authentication. If this option is not given, the user is
asked for a password, if the password authentication method is attempted.
diffie_hellman_group_exchange_client_option() =
{dh_gex_limits,
{Min :: integer() >= 1,
I :: integer() >= 1,
Max :: integer() >= 1}}
Sets the three diffie-hellman-group-exchange parameters that guides the connected server in
choosing a group. See RFC 4419 for the details. The default value is {1024, 6144, 8192}.
connect_timeout_client_option() = {connect_timeout, timeout()}
Sets a timeout on the transport layer connect time. For gen_tcp the time is in milli-seconds and
the default value is infinity.
See the parameter Timeout in connect/4 for a timeout of the negotiation phase.
recv_ext_info_client_option() = {recv_ext_info, boolean()}
Make the client tell the server that the client accepts extension negotiation, that is, include
ext-info-c in the kexinit message sent. See RFC 8308 for details and ssh(7) for a list of
currently implemented extensions.
Default value is true which is compatible with other implementations not supporting ext-info.
Daemon Options (Server Options)
daemon_options() = [daemon_option()]
daemon_option() =
subsystem_daemon_option() |
shell_daemon_option() |
exec_daemon_option() |
ssh_cli_daemon_option() |
authentication_daemon_options() |
diffie_hellman_group_exchange_daemon_option() |
negotiation_timeout_daemon_option() |
hardening_daemon_options() |
callbacks_daemon_options() |
send_ext_info_daemon_option() |
opaque_daemon_options() |
gen_tcp:listen_option() |
common_option()
Options for daemons. The individual options are further explained below or by following the
hyperlinks.
subsystem_daemon_option() = {subsystems, subsystem_specs()}
subsystem_specs() = [subsystem_spec()]
subsystem_spec() = {Name :: string(), mod_args()}
Defines a subsystem in the daemon.
The subsystem_name is the name that a client requests to start with for example
ssh_connection:subsystem/4.
The channel_callback is the module that implements the ssh_server_channel (replaces
ssh_daemon_channel) behaviour in the daemon. See the section Creating a Subsystem in the User's
Guide for more information and an example.
If the subsystems option is not present, the value of ssh_sftpd:subsystem_spec([]) is used. This
enables the sftp subsystem by default. The option can be set to the empty list if you do not want
the daemon to run any subsystems.
shell_daemon_option() = {shell, shell_spec()}
shell_spec() = mod_fun_args() | shell_fun() | disabled
shell_fun() = 'shell_fun/1'() | 'shell_fun/2'()
'shell_fun/1'() = fun((User :: string()) -> pid())
'shell_fun/2'() =
fun((User :: string(), PeerAddr :: inet:ip_address()) -> pid())
Defines the read-eval-print loop used in a daemon when a shell is requested by the client. The
default is to use the Erlang shell: {shell, start, []}
See the option exec-option for a description of how the daemon executes shell-requests and exec-
requests depending on the shell- and exec-options.
exec_daemon_option() = {exec, exec_spec()}
exec_spec() =
{direct, exec_fun()} | disabled | deprecated_exec_opt()
exec_fun() = 'exec_fun/1'() | 'exec_fun/2'() | 'exec_fun/3'()
'exec_fun/1'() = fun((Cmd :: string()) -> exec_result())
'exec_fun/2'() =
fun((Cmd :: string(), User :: string()) -> exec_result())
'exec_fun/3'() =
fun((Cmd :: string(),
User :: string(),
ClientAddr :: ip_port()) ->
exec_result())
exec_result() =
{ok, Result :: term()} | {error, Reason :: term()}
This option changes how the daemon executes exec-requests from clients. The term in the return
value is formatted to a string if it is a non-string type. No trailing newline is added in the ok-
case.
See the User's Guide section on One-Time Execution for examples.
Error texts are returned on channel-type 1 which usually is piped to stderr on e.g Linux systems.
Texts from a successful execution are returned on channel-type 0 and will in similar manner be
piped to stdout. The exit-status code is set to 0 for success and 255 for errors. The exact
results presented on the client side depends on the client and the client's operating system.
In case of the {direct, exec_fun()} variant or no exec-option at all, all reads from
standard_input will be from the received data-events of type 0. Those are sent by the client.
Similarily all writes to standard_output will be sent as data-events to the client. An OS shell
client like the command 'ssh' will usally use stdin and stdout for the user interface.
The option cooperates with the daemon-option shell in the following way:
1. If neither the exec-option nor the shell-option is present::
The default Erlang evaluator is used both for exec and shell requests. The result is returned
to the client.
2. If the exec_spec's value is disabled (the shell-option may or may not be present)::
No exec-requests are executed but shell-requests are not affected, they follow the
shell_spec's value.
3. If the exec-option is present and the exec_spec value =/= disabled (the shell-option may or
may not be present)::
The exec_spec fun() is called with the same number of parameters as the arity of the fun, and
the result is returned to the client. Shell-requests are not affected, they follow the
shell_spec's value.
4. If the exec-option is absent, and the shell-option is present with the default Erlang shell
as the shell_spec's value::
The default Erlang evaluator is used both for exec and shell requests. The result is returned
to the client.
5. If the exec-option is absent, and the shell-option is present with a value that is neither
the default Erlang shell nor the value disabled::
The exec-request is not evaluated and an error message is returned to the client. Shell-
requests are executed according to the value of the shell_spec.
6. If the exec-option is absent, and the shell_spec's value is disabled::
Exec requests are executed by the default shell, but shell-requests are not executed.
If a custom CLI is installed (see the option ssh_cli) the rules above are replaced by thoose
implied by the custom CLI.
Note:
The exec-option has existed for a long time but has not previously been documented. The old
definition and behaviour are retained but obey the rules 1-6 above if conflicting. The old and
undocumented style should not be used in new programs.
deprecated_exec_opt() = function() | mod_fun_args()
Old-style exec specification that are kept for compatibility, but should not be used in new
programs
ssh_cli_daemon_option() = {ssh_cli, mod_args() | no_cli}
Provides your own CLI implementation in a daemon.
It is a channel callback module that implements a shell and command execution. The shell's read-
eval-print loop can be customized, using the option shell. This means less work than implementing
an own CLI channel. If ssh_cli is set to no_cli, the CLI channels like shell and exec are disabled
and only subsystem channels are allowed.
authentication_daemon_options() =
ssh_file:system_dir_daemon_option() |
{auth_method_kb_interactive_data, prompt_texts()} |
{user_passwords, [{UserName :: string(), Pwd :: string()}]} |
{password, string()} |
{pwdfun, pwdfun_2() | pwdfun_4()}
prompt_texts() = kb_int_tuple() | kb_int_fun_3()
kb_int_tuple() =
{Name :: string(),
Instruction :: string(),
Prompt :: string(),
Echo :: boolean()}
kb_int_fun_3() =
fun((Peer :: ip_port(), User :: string(), Service :: string()) ->
kb_int_tuple())
pwdfun_2() =
fun((User :: string(), Password :: string()) -> boolean())
pwdfun_4() =
fun((User :: string(),
Password :: string(),
PeerAddress :: ip_port(),
State :: any()) ->
boolean() |
disconnect |
{boolean(), NewState :: any()})
auth_method_kb_interactive_data:
Sets the text strings that the daemon sends to the client for presentation to the user when
using keyboard-interactive authentication.
If the fun/3 is used, it is called when the actual authentication occurs and may therefore
return dynamic data like time, remote ip etc.
The parameter Echo guides the client about need to hide the password.
The default value is: {auth_method_kb_interactive_data, {"SSH server", "Enter password for
\""++User++"\"", "password: ", false}>
user_passwords:
Provides passwords for password authentication. The passwords are used when someone tries to
connect to the server and public key user-authentication fails. The option provides a list of
valid usernames and the corresponding passwords.
password:
Provides a global password that authenticates any user.
Warning:
Intended to facilitate testing.
From a security perspective this option makes the server very vulnerable.
pwdfun with pwdfun_4():
Provides a function for password validation. This could used for calling an external system or
handeling passwords stored as hash values.
This fun can also be used to make delays in authentication tries for example by calling
timer:sleep/1.
To facilitate for instance counting of failed tries, the State variable could be used. This
state is per connection only. The first time the pwdfun is called for a connection, the State
variable has the value undefined.
The fun should return:
* true if the user and password is valid
* false if the user or password is invalid
* disconnect if a SSH_MSG_DISCONNECT message should be sent immediately. It will be followed
by a close of the underlying tcp connection.
* {true, NewState:any()} if the user and password is valid
* {false, NewState:any()} if the user or password is invalid
A third usage is to block login attempts from a missbehaving peer. The State described above
can be used for this. The return value disconnect is useful for this.
pwdfun with pwdfun_2():
Provides a function for password validation. This function is called with user and password as
strings, and returns:
* true if the user and password is valid
* false if the user or password is invalid
This variant is kept for compatibility.
diffie_hellman_group_exchange_daemon_option() =
{dh_gex_groups,
[explicit_group()] |
explicit_group_file() |
ssh_moduli_file()} |
{dh_gex_limits, {Min :: integer() >= 1, Max :: integer() >= 1}}
explicit_group() =
{Size :: integer() >= 1,
G :: integer() >= 1,
P :: integer() >= 1}
explicit_group_file() = {file, string()}
ssh_moduli_file() = {ssh_moduli_file, string()}
dh_gex_groups:
Defines the groups the server may choose among when diffie-hellman-group-exchange is
negotiated. See RFC 4419 for details. The three variants of this option are:
{Size=integer(),G=integer(),P=integer()}:
The groups are given explicitly in this list. There may be several elements with the same
Size. In such a case, the server will choose one randomly in the negotiated Size.
{file,filename()}:
The file must have one or more three-tuples {Size=integer(),G=integer(),P=integer()}
terminated by a dot. The file is read when the daemon starts.
{ssh_moduli_file,filename()}:
The file must be in ssh-keygen moduli file format. The file is read when the daemon starts.
The default list is fetched from the public_key application.
dh_gex_limits:
Limits what a client can ask for in diffie-hellman-group-exchange. The limits will be {MaxUsed
= min(MaxClient,Max), MinUsed = max(MinClient,Min)} where MaxClient and MinClient are the
values proposed by a connecting client.
The default value is {0,infinity}.
If MaxUsed < MinUsed in a key exchange, it will fail with a disconnect.
See RFC 4419 for the function of the Max and Min values.
negotiation_timeout_daemon_option() =
{negotiation_timeout, timeout()}
Maximum time in milliseconds for the authentication negotiation. Defaults to 120000 ms (2
minutes). If the client fails to log in within this time, the connection is closed.
hardening_daemon_options() =
{max_sessions, integer() >= 1} |
{max_channels, integer() >= 1} |
{parallel_login, boolean()} |
{minimal_remote_max_packet_size, integer() >= 1}
max_sessions:
The maximum number of simultaneous sessions that are accepted at any time for this daemon.
This includes sessions that are being authorized. Thus, if set to N, and N clients have
connected but not started the login process, connection attempt N+1 is aborted. If N
connections are authenticated and still logged in, no more logins are accepted until one of
the existing ones log out.
The counter is per listening port. Thus, if two daemons are started, one with {max_sessions,N}
and the other with {max_sessions,M}, in total N+M connections are accepted for the whole ssh
application.
Notice that if parallel_login is false, only one client at a time can be in the authentication
phase.
By default, this option is not set. This means that the number is not limited.
max_channels:
The maximum number of channels with active remote subsystem that are accepted for each
connection to this daemon
By default, this option is not set. This means that the number is not limited.
parallel_login:
If set to false (the default value), only one login is handled at a time. If set to true, an
unlimited number of login attempts are allowed simultaneously.
If the max_sessions option is set to N and parallel_login is set to true, the maximum number
of simultaneous login attempts at any time is limited to N-K, where K is the number of
authenticated connections present at this daemon.
Warning:
Do not enable parallel_logins without protecting the server by other means, for example, by the
max_sessions option or a firewall configuration. If set to true, there is no protection against
DOS attacks.
minimal_remote_max_packet_size:
The least maximum packet size that the daemon will accept in channel open requests from the
client. The default value is 0.
callbacks_daemon_options() =
{failfun,
fun((User :: string(),
PeerAddress :: inet:ip_address(),
Reason :: term()) ->
term())} |
{connectfun,
fun((User :: string(),
PeerAddress :: inet:ip_address(),
Method :: string()) ->
term())}
connectfun:
Provides a fun to implement your own logging when a user authenticates to the server.
failfun:
Provides a fun to implement your own logging when a user fails to authenticate.
send_ext_info_daemon_option() = {send_ext_info, boolean()}
Make the server (daemon) tell the client that the server accepts extension negotiation, that is,
include ext-info-s in the kexinit message sent. See RFC 8308 for details and ssh(7) for a list of
currently implemented extensions.
Default value is true which is compatible with other implementations not supporting ext-info.
Options common to clients and daemons
common_options() = [common_option()]
common_option() =
ssh_file:user_dir_common_option() |
profile_common_option() |
max_idle_time_common_option() |
key_cb_common_option() |
disconnectfun_common_option() |
unexpectedfun_common_option() |
ssh_msg_debug_fun_common_option() |
rekey_limit_common_option() |
id_string_common_option() |
pref_public_key_algs_common_option() |
preferred_algorithms_common_option() |
modify_algorithms_common_option() |
auth_methods_common_option() |
inet_common_option() |
fd_common_option()
The options above can be used both in clients and in daemons (servers). They are further explained
below.
profile_common_option() = {profile, atom()}
Used together with ip-address and port to uniquely identify a ssh daemon. This can be useful in a
virtualized environment, where there can be more that one server that has the same ip-address and
port. If this property is not explicitly set, it is assumed that the the ip-address and port
uniquely identifies the SSH daemon.
max_idle_time_common_option() = {idle_time, timeout()}
Sets a time-out on a connection when no channels are open. Defaults to infinity. The unit is
milliseconds.
The timeout is not active until channels are started, so it does not limit the time from the
connection creation to the first channel opening.
rekey_limit_common_option() =
{rekey_limit,
Bytes ::
limit_bytes() |
{Minutes :: limit_time(), Bytes :: limit_bytes()}}
limit_bytes() = integer() >= 0 | infinity
limit_time() = integer() >= 1 | infinity
Sets the limit when rekeying is to be initiated. Both the max time and max amount of data could be
configured:
* {Minutes, Bytes} initiate rekeying when any of the limits are reached.
* Bytes initiate rekeying when Bytes number of bytes are transferred, or at latest after one
hour.
When a rekeying is done, both the timer and the byte counter are restarted. Defaults to one hour
and one GByte.
If Minutes is set to infinity, no rekeying will ever occur due to that max time has passed.
Setting Bytes to infinity will inhibit rekeying after a certain amount of data has been
transferred. If the option value is set to {infinity, infinity}, no rekeying will be initiated.
Note that rekeying initiated by the peer will still be performed.
key_cb_common_option() =
{key_cb,
Module :: atom() | {Module :: atom(), Opts :: [term()]}}
Module implementing the behaviour ssh_client_key_api and/or ssh_server_key_api. Can be used to
customize the handling of public keys. If callback options are provided along with the module
name, they are made available to the callback module via the options passed to it under the key
'key_cb_private'.
The Opts defaults to [] when only the Module is specified.
The default value of this option is {ssh_file, []}. See also the manpage of ssh_file.
A call to the call-back function F will be
Module:F(..., [{key_cb_private,Opts}|UserOptions])
where ... are arguments to F as in ssh_client_key_api and/or ssh_server_key_api. The UserOptions
are the options given to ssh:connect, ssh:shell or ssh:daemon.
pref_public_key_algs_common_option() =
{pref_public_key_algs, [pubkey_alg()]}
List of user (client) public key algorithms to try to use.
The default value is the public_key entry in the list returned by ssh:default_algorithms/0.
If there is no public key of a specified type available, the corresponding entry is ignored. Note
that the available set is dependent on the underlying cryptolib and current user's public keys.
See also the option user_dir for specifying the path to the user's keys.
disconnectfun_common_option() =
{disconnectfun, fun((Reason :: term()) -> void | any())}
Provides a fun to implement your own logging when the peer disconnects.
unexpectedfun_common_option() =
{unexpectedfun,
fun((Message :: term(), {Host :: term(), Port :: term()}) ->
report | skip)}
Provides a fun to implement your own logging or other action when an unexpected message arrives.
If the fun returns report the usual info report is issued but if skip is returned no report is
generated.
ssh_msg_debug_fun_common_option() =
{ssh_msg_debug_fun,
fun((ssh:connection_ref(),
AlwaysDisplay :: boolean(),
Msg :: binary(),
LanguageTag :: binary()) ->
any())}
Provide a fun to implement your own logging of the SSH message SSH_MSG_DEBUG. The last three
parameters are from the message, see RFC 4253, section 11.3. The connection_ref() is the reference
to the connection on which the message arrived. The return value from the fun is not checked.
The default behaviour is ignore the message. To get a printout for each message with AlwaysDisplay
= true, use for example {ssh_msg_debug_fun, fun(_,true,M,_)-> io:format("DEBUG: ~p~n", [M]) end}
id_string_common_option() =
{id_string,
string() |
random |
{random, Nmin :: integer() >= 1, Nmax :: integer() >= 1}}
The string the daemon will present to a connecting peer initially. The default value is
"Erlang/VSN" where VSN is the ssh application version number.
The value random will cause a random string to be created at each connection attempt. This is to
make it a bit more difficult for a malicious peer to find the ssh software brand and version.
The value {random, Nmin, Nmax} will make a random string with at least Nmin characters and at most
Nmax characters.
preferred_algorithms_common_option() =
{preferred_algorithms, algs_list()}
algs_list() = [alg_entry()]
alg_entry() =
{kex, [kex_alg()]} |
{public_key, [pubkey_alg()]} |
{cipher, double_algs(cipher_alg())} |
{mac, double_algs(mac_alg())} |
{compression, double_algs(compression_alg())}
kex_alg() =
'diffie-hellman-group-exchange-sha1' |
'diffie-hellman-group-exchange-sha256' |
'diffie-hellman-group1-sha1' | 'diffie-hellman-group14-sha1' |
'diffie-hellman-group14-sha256' |
'diffie-hellman-group16-sha512' |
'diffie-hellman-group18-sha512' | 'curve25519-sha256' |
'curve25519-sha256@libssh.org' | 'curve448-sha512' |
'ecdh-sha2-nistp256' | 'ecdh-sha2-nistp384' |
'ecdh-sha2-nistp521'
pubkey_alg() =
'ecdsa-sha2-nistp256' | 'ecdsa-sha2-nistp384' |
'ecdsa-sha2-nistp521' | 'ssh-ed25519' | 'ssh-ed448' |
'rsa-sha2-256' | 'rsa-sha2-512' | 'ssh-dss' | 'ssh-rsa'
cipher_alg() =
'3des-cbc' | 'AEAD_AES_128_GCM' | 'AEAD_AES_256_GCM' |
'aes128-cbc' | 'aes128-ctr' | 'aes128-gcm@openssh.com' |
'aes192-ctr' | 'aes192-cbc' | 'aes256-cbc' | 'aes256-ctr' |
'aes256-gcm@openssh.com' | 'chacha20-poly1305@openssh.com'
mac_alg() =
'AEAD_AES_128_GCM' | 'AEAD_AES_256_GCM' | 'hmac-sha1' |
'hmac-sha1-96' | 'hmac-sha2-256' | 'hmac-sha2-512'
compression_alg() = none | zlib | 'zlib@openssh.com'
double_algs(AlgType) =
[{client2server, [AlgType]} | {server2client, [AlgType]}] |
[AlgType]
List of algorithms to use in the algorithm negotiation. The default algs_list() can be obtained
from default_algorithms/0.
If an alg_entry() is missing in the algs_list(), the default value is used for that entry.
Here is an example of this option:
{preferred_algorithms,
[{public_key,['ssh-rsa','ssh-dss']},
{cipher,[{client2server,['aes128-ctr']},
{server2client,['aes128-cbc','3des-cbc']}]},
{mac,['hmac-sha2-256','hmac-sha1']},
{compression,[none,zlib]}
]
}
The example specifies different algorithms in the two directions (client2server and
server2client), for cipher but specifies the same algorithms for mac and compression in both
directions. The kex (key exchange) is implicit but public_key is set explicitly.
For background and more examples see the User's Guide.
If an algorithm name occurs more than once in a list, the behaviour is undefined. The tags in the
property lists are also assumed to occur at most one time.
Warning:
Changing the values can make a connection less secure. Do not change unless you know exactly what
you are doing. If you do not understand the values then you are not supposed to change them.
modify_algorithms_common_option() =
{modify_algorithms, modify_algs_list()}
modify_algs_list() =
[{append, algs_list()} |
{prepend, algs_list()} |
{rm, algs_list()}]
Modifies the list of algorithms to use in the algorithm negotiation. The modifications are applied
after the option preferred_algorithms (if existing) is applied.
The algoritm for modifications works like this:
* Input is the modify_algs_list() and a set of algorithms A obtained from the
preferred_algorithms option if existing, or else from the ssh:default_algorithms/0.
* The head of the modify_algs_list() modifies A giving the result A'.
The possible modifications are:
* Append or prepend supported but not enabled algorithm(s) to the list of algorithms. If the
wanted algorithms already are in A they will first be removed and then appended or
prepended,
* Remove (rm) one or more algorithms from A.
* Repeat the modification step with the tail of modify_algs_list() and the resulting A'.
If an unsupported algorithm is in the modify_algs_list(), it will be silently ignored
If there are more than one modify_algorithms options, the result is undefined.
Here is an example of this option:
{modify_algorithms,
[{prepend, [{kex, ['diffie-hellman-group1-sha1']}],
{rm, [{compression, [none]}]}
]
}
The example specifies that:
* the old key exchange algorithm 'diffie-hellman-group1-sha1' should be the main alternative. It
will be the main alternative since it is prepened to the list
* The compression algorithm none (= no compression) is removed so compression is enforced
For background and more examples see the User's Guide.
inet_common_option() = {inet, inet | inet6}
IP version to use when the host address is specified as any.
auth_methods_common_option() = {auth_methods, string()}
Comma-separated string that determines which authentication methods that the client shall support
and in which order they are tried. Defaults to "publickey,keyboard-interactive,password"
Note that the client is free to use any order and to exclude methods.
fd_common_option() = {fd, gen_tcp:socket()}
Allows an existing file-descriptor to be used (passed on to the transport protocol).
Other data types
host() = string() | inet:ip_address() | loopback
ip_port() = {inet:ip_address(), inet:port_number()}
mod_args() = {Module :: atom(), Args :: list()}
mod_fun_args() =
{Module :: atom(), Function :: atom(), Args :: list()}
open_socket() = gen_tcp:socket()
The socket is supposed to be result of a gen_tcp:connect or a gen_tcp:accept. The socket must be
in passive mode (that is, opened with the option {active,false}).
daemon_ref()
Opaque data type representing a daemon.
Returned by the functions daemon/1,2,3.
connection_ref()
Opaque data type representing a connection between a client and a server (daemon).
Returned by the functions connect/2,3,4 and ssh_sftp:start_channel/2,3.
channel_id()
Opaque data type representing a channel inside a connection.
Returned by the functions ssh_connection:session_channel/2,4.
connection_info_tuple() =
{client_version, version()} |
{server_version, version()} |
{user, string()} |
{peer, {inet:hostname(), ip_port()}} |
{sockname, ip_port()} |
{options, client_options()} |
{algorithms, conn_info_algs()} |
{channels, conn_info_channels()}
version() = {protocol_version(), software_version()}
protocol_version() =
{Major :: integer() >= 1, Minor :: integer() >= 0}
software_version() = string()
conn_info_algs() =
[{kex, kex_alg()} |
{hkey, pubkey_alg()} |
{encrypt, cipher_alg()} |
{decrypt, cipher_alg()} |
{send_mac, mac_alg()} |
{recv_mac, mac_alg()} |
{compress, compression_alg()} |
{decompress, compression_alg()} |
{send_ext_info, boolean()} |
{recv_ext_info, boolean()}]
conn_info_channels() = [proplists:proplist()]
Return values from the connection_info/1 and connection_info/2 functions.
In the option info tuple are only the options included that differs from the default values.
daemon_info_tuple() =
{port, inet:port_number()} |
{ip, inet:ip_address()} |
{profile, atom()} |
{options, daemon_options()}
Return values from the daemon_info/1 and daemon_info/2 functions.
In the option info tuple are only the options included that differs from the default values.
opaque_client_options
opaque_daemon_options
opaque_common_options
Opaque types that define experimental options that are not to be used in products.
EXPORTS
close(ConnectionRef) -> ok | {error, term()}
Types:
ConnectionRef = connection_ref()
Closes an SSH connection.
connect(Host, Port, Options) -> Result
connect(Host, Port, Options, NegotiationTimeout) -> Result
connect(TcpSocket, Options) -> Result
connect(TcpSocket, Options, NegotiationTimeout) -> Result
Types:
Host = host()
Port = inet:port_number()
Options = client_options()
TcpSocket = open_socket()
NegotiationTimeout = timeout()
Result = {ok, connection_ref()} | {error, term()}
Connects to an SSH server at the Host on Port.
As an alternative, an already open TCP socket could be passed to the function in TcpSocket. The
SSH initiation and negotiation will be initiated on that one with the SSH that should be at the
other end.
No channel is started. This is done by calling ssh_connection:session_channel/[2, 4].
The NegotiationTimeout is in milli-seconds. The default value is infinity. For connection timeout,
use the option connect_timeout.
connection_info(ConnectionRef) -> InfoTupleList
connection_info(ConnectionRef, Key :: ItemList | Item) ->
InfoTupleList | InfoTuple
Types:
ConnectionRef = connection_ref()
ItemList = [Item]
Item =
client_version | server_version | user | peer | sockname |
options | algorithms | sockname
InfoTupleList = [InfoTuple]
InfoTuple = connection_info_tuple()
Returns information about a connection intended for e.g debugging or logging.
When the Key is a single Item, the result is a single InfoTuple
daemon(Port | TcpSocket) -> Result
daemon(Port | TcpSocket, Options) -> Result
daemon(HostAddress, Port, Options) -> Result
Types:
Port = integer()
TcpSocket = open_socket()
Options = daemon_options()
HostAddress = host() | any
Result = {ok, daemon_ref()} | {error, atom()}
Starts a server listening for SSH connections on the given port. If the Port is 0, a random free
port is selected. See daemon_info/1 about how to find the selected port number.
As an alternative, an already open TCP socket could be passed to the function in TcpSocket. The
SSH initiation and negotiation will be initiated on that one when an SSH starts at the other end
of the TCP socket.
For a description of the options, see Daemon Options.
Please note that by historical reasons both the HostAddress argument and the gen_tcp
connect_option() {ip,Address} set the listening address. This is a source of possible inconsistent
settings.
The rules for handling the two address passing options are:
* if HostAddress is an IP-address, that IP-address is the listening address. An 'ip'-option will
be discarded if present.
* if HostAddress is the atom loopback, the listening address is loopback and an loopback address
will be choosen by the underlying layers. An 'ip'-option will be discarded if present.
* if HostAddress is the atom any and no 'ip'-option is present, the listening address is any and
the socket will listen to all addresses
* if HostAddress is any and an 'ip'-option is present, the listening address is set to the value
of the 'ip'-option
daemon_info(DaemonRef) ->
{ok, InfoTupleList} | {error, bad_daemon_ref}
daemon_info(DaemonRef, Key :: ItemList | Item) ->
InfoTupleList | InfoTuple | {error, bad_daemon_ref}
Types:
DaemonRef = daemon_ref()
ItemList = [Item]
Item = ip | port | profile | options
InfoTupleList = [InfoTuple]
InfoTuple = daemon_info_tuple()
Returns information about a daemon intended for e.g debugging or logging.
When the Key is a single Item, the result is a single InfoTuple
Note that daemon_info/1 and daemon_info/2 returns different types due to compatibility reasons.
default_algorithms() -> algs_list()
Returns a key-value list, where the keys are the different types of algorithms and the values are
the algorithms themselves.
See the User's Guide for an example.
shell(Host | TcpSocket) -> Result
shell(Host | TcpSocket, Options) -> Result
shell(Host, Port, Options) -> Result
Types:
Host = host()
TcpSocket = open_socket()
Port = inet:port_number()
Options = client_options()
Result = ok | {error, Reason::term()}
Connects to an SSH server at Host and Port (defaults to 22) and starts an interactive shell on
that remote host.
As an alternative, an already open TCP socket could be passed to the function in TcpSocket. The
SSH initiation and negotiation will be initiated on that one and finaly a shell will be started on
the host at the other end of the TCP socket.
For a description of the options, see Client Options.
The function waits for user input, and does not return until the remote shell is ended (that is,
exit from the shell).
start() -> ok | {error, term()}
start(Type) -> ok | {error, term()}
Types:
Type = permanent | transient | temporary
Utility function that starts the applications crypto, public_key, and ssh. Default type is
temporary. For more information, see the application(3erl) manual page in Kernel.
stop() -> ok | {error, term()}
Stops the ssh application. For more information, see the application(3erl) manual page in Kernel.
stop_daemon(DaemonRef :: daemon_ref()) -> ok
stop_daemon(Address :: inet:ip_address(),
Port :: inet:port_number()) ->
ok
stop_daemon(Address :: any | inet:ip_address(),
Port :: inet:port_number(),
Profile :: atom()) ->
ok
Stops the listener and all connections started by the listener.
stop_listener(SysSup :: daemon_ref()) -> ok
stop_listener(Address :: inet:ip_address(),
Port :: inet:port_number()) ->
ok
stop_listener(Address :: any | inet:ip_address(),
Port :: inet:port_number(),
Profile :: term()) ->
ok
Stops the listener, but leaves existing connections started by the listener operational.