Provided by: erlang-manpages_22.2.7+dfsg-1ubuntu0.2_all 
NAME
tftp - Trivial FTP.
DESCRIPTION
Interface module for the tftp application.
DATA TYPES
ServiceConfig = Options
Options = [option()]
Most of the options are common for both the client and the server side, but some of them differs a
little. The available option()s are as follows:
{debug, Level}:
Level = none | error | warning | brief | normal | verbose | all
Controls the level of debug printouts. Default is none.
{host, Host}:
Host = hostname(), see inet(3erl).
The name or IP address of the host where the TFTP daemon resides. This option is only used by the
client.
{port, Port}:
Port = int()
The TFTP port where the daemon listens. Defaults is the standardized number 69. On the server side,
it can sometimes make sense to set it to 0, meaning that the daemon just picks a free port (which one
is returned by function info/1).
If a socket is connected already, option {udp, [{fd, integer()}]} can be used to pass the open file
descriptor to gen_udp. This can be automated by using a command-line argument stating the prebound
file descriptor number. For example, if the port is 69 and file descriptor 22 is opened by
setuid_socket_wrap, the command-line argument "-tftpd_69 22" triggers the prebound file descriptor 22
to be used instead of opening port 69. The UDP option {udp, [{fd, 22}]} is automatically added. See
init:get_argument/ about command-line arguments and gen_udp:open/2 about UDP options.
{port_policy, Policy}:
Policy = random | Port | {range, MinPort, MaxPort}
Port = MinPort = MaxPort = int()
Policy for the selection of the temporary port that is used by the server/client during the file
transfer. Default is random, which is the standardized policy. With this policy a randomized free
port is used. A single port or a range of ports can be useful if the protocol passes through a
firewall.
{udp, Options}:
Options = [Opt], see gen_udp:open/2.
{use_tsize, Bool}:
Bool = bool()
Flag for automated use of option tsize. With this set to true, the write_file/3 client determines the
filesize and sends it to the server as the standardized tsize option. A read_file/3 client acquires
only a filesize from the server by sending a zero tsize.
{max_tsize, MaxTsize}:
MaxTsize = int() | infinity
Threshold for the maximal filesize in bytes. The transfer is aborted if the limit is exceeded.
Default is infinity.
{max_conn, MaxConn}:
MaxConn = int() | infinity
Threshold for the maximal number of active connections. The daemon rejects the setup of new
connections if the limit is exceeded. Default is infinity.
{TftpKey, TftpVal}:
TftpKey = string()
TftpVal = string()
Name and value of a TFTP option.
{reject, Feature}:
Feature = Mode | TftpKey
Mode = read | write
TftpKey = string()
Controls which features to reject. This is mostly useful for the server as it can restrict the use of
certain TFTP options or read/write access.
{callback, {RegExp, Module, State}}:
RegExp = string()
Module = atom()
State = term()
Registration of a callback module. When a file is to be transferred, its local filename is matched to
the regular expressions of the registered callbacks. The first matching callback is used during the
transfer. See read_file/3 and write_file/3.
The callback module must implement the tftp behavior, see CALLBACK FUNCTIONS.
{logger, Module}:
Module = module()
Callback module for customized logging of errors, warnings, and info messages. The callback module
must implement the tftp_logger behavior, see LOGGER FUNCTIONS. The default module is tftp_logger.
{max_retries, MaxRetries}:
MaxRetries = int()
Threshold for the maximal number of retries. By default the server/client tries to resend a message
up to five times when the time-out expires.
EXPORTS
change_config(daemons, Options) -> [{Pid, Result}]
Types:
Options = [option()]
Pid = pid()
Result = ok | {error, Reason}
Reason = term()
Changes configuration for all TFTP daemon processes.
change_config(servers, Options) -> [{Pid, Result}]
Types:
Options = [option()]
Pid = pid()
Result = ok | {error, Reason}
Reason = term()
Changes configuration for all TFTP server processes.
change_config(Pid, Options) -> Result
Types:
Pid = pid()
Options = [option()]
Result = ok | {error, Reason}
Reason = term()
Changes configuration for a TFTP daemon, server, or client process.
info(daemons) -> [{Pid, Options}]
Types:
Pid = [pid()]
Options = [option()]
Reason = term()
Returns information about all TFTP daemon processes.
info(servers) -> [{Pid, Options}]
Types:
Pid = [pid()]
Options = [option()]
Reason = term()
Returns information about all TFTP server processes.
info(Pid) -> {ok, Options} | {error, Reason}
Types:
Options = [option()]
Reason = term()
Returns information about a TFTP daemon, server, or client process.
read_file(RemoteFilename, LocalFilename, Options) -> {ok, LastCallbackState} | {error, Reason}
Types:
RemoteFilename = string()
LocalFilename = binary | string()
Options = [option()]
LastCallbackState = term()
Reason = term()
Reads a (virtual) file RemoteFilename from a TFTP server.
If LocalFilename is the atom binary, tftp_binary is used as callback module. It concatenates all
transferred blocks and returns them as one single binary in LastCallbackState.
If LocalFilename is a string and there are no registered callback modules, tftp_file is used as
callback module. It writes each transferred block to the file named LocalFilename and returns the
number of transferred bytes in LastCallbackState.
If LocalFilename is a string and there are registered callback modules, LocalFilename is tested
against the regexps of these and the callback module corresponding to the first match is used, or
an error tuple is returned if no matching regexp is found.
start(Options) -> {ok, Pid} | {error, Reason}
Types:
Options = [option()]
Pid = pid()
Reason = term()
Starts a daemon process listening for UDP packets on a port. When it receives a request for read
or write, it spawns a temporary server process handling the actual transfer of the (virtual) file.
write_file(RemoteFilename, LocalFilename, Options) -> {ok, LastCallbackState} | {error, Reason}
Types:
RemoteFilename = string()
LocalFilename = binary() | string()
Options = [option()]
LastCallbackState = term()
Reason = term()
Writes a (virtual) file RemoteFilename to a TFTP server.
If LocalFilename is a binary, tftp_binary is used as callback module. The binary is transferred
block by block and the number of transferred bytes is returned in LastCallbackState.
If LocalFilename is a string and there are no registered callback modules, tftp_file is used as
callback module. It reads the file named LocalFilename block by block and returns the number of
transferred bytes in LastCallbackState.
If LocalFilename is a string and there are registered callback modules, LocalFilename is tested
against the regexps of these and the callback module corresponding to the first match is used, or
an error tuple is returned if no matching regexp is found.
CALLBACK FUNCTIONS
A tftp callback module is to be implemented as a tftp behavior and export the functions listed in the
following.
On the server side, the callback interaction starts with a call to open/5 with the registered initial
callback state. open/5 is expected to open the (virtual) file. Then either function read/1 or write/2 is
invoked repeatedly, once per transferred block. At each function call, the state returned from the
previous call is obtained. When the last block is encountered, function read/1 or write/2 is expected to
close the (virtual) file and return its last state. Function abort/3 is only used in error situations.
Function prepare/5 is not used on the server side.
On the client side, the callback interaction is the same, but it starts and ends a bit differently. It
starts with a call to prepare/5 with the same arguments as open/5 takes. prepare/5 is expected to
validate the TFTP options suggested by the user and to return the subset of them that it accepts. Then
the options are sent to the server, which performs the same TFTP option negotiation procedure. The
options that are accepted by the server are forwarded to function open/5 on the client side. On the
client side, function open/5 must accept all option as-is or reject the transfer. Then the callback
interaction follows the same pattern as described for the server side. When the last block is encountered
in read/1 or write/2, the returned state is forwarded to the user and returned from read_file/3 or
write_file/3.
If a callback (performing the file access in the TFTP server) takes too long time (more than the double
TFTP time-out), the server aborts the connection and sends an error reply to the client. This implies
that the server releases resources attached to the connection faster than before. The server simply
assumes that the client has given up.
If the TFTP server receives yet another request from the same client (same host and port) while it
already has an active connection to the client, it ignores the new request if the request is equal to the
first one (same filename and options). This implies that the (new) client will be served by the already
ongoing connection on the server side. By not setting up yet another connection, in parallel with the
ongoing one, the server consumes less resources.
EXPORTS
Module:abort(Code, Text, State) -> ok
Types:
Code = undef | enoent | eacces | enospc
| badop | eexist | baduser | badopt
| int()
Text = string()
State = term()
Invoked when the file transfer is aborted.
The callback function is expected to clean up its used resources after the aborted file transfer,
such as closing open file descriptors and so on. The function is not invoked if any of the other
callback functions returns an error, as it is expected that they already have cleaned up the
necessary resources. However, it is invoked if the functions fail (crash).
Module:open(Peer, Access, Filename, Mode, SuggestedOptions, State) -> {ok, AcceptedOptions, NewState} |
{error, {Code, Text}}
Types:
Peer = {PeerType, PeerHost, PeerPort}
PeerType = inet | inet6
PeerHost = ip_address()
PeerPort = integer()
Access = read | write
Filename = string()
Mode = string()
SuggestedOptions = AcceptedOptions = [{Key, Value}]
Key = Value = string()
State = InitialState | term()
InitialState = [] | [{root_dir, string()}]
NewState = term()
Code = undef | enoent | eacces | enospc
| badop | eexist | baduser | badopt
| int()
Text = string()
Opens a file for read or write access.
On the client side, where the open/5 call has been preceded by a call to prepare/5, all options
must be accepted or rejected.
On the server side, where there is no preceding prepare/5 call, no new options can be added, but
those present in SuggestedOptions can be omitted or replaced with new values in AcceptedOptions.
Module:prepare(Peer, Access, Filename, Mode, SuggestedOptions, InitialState) -> {ok, AcceptedOptions,
NewState} | {error, {Code, Text}}
Types:
Peer = {PeerType, PeerHost, PeerPort}
PeerType = inet | inet6
PeerHost = ip_address()
PeerPort = integer()
Access = read | write
Filename = string()
Mode = string()
SuggestedOptions = AcceptedOptions = [{Key, Value}]
Key = Value = string()
InitialState = [] | [{root_dir, string()}]
NewState = term()
Code = undef | enoent | eacces | enospc
| badop | eexist | baduser | badopt
| int()
Text = string()
Prepares to open a file on the client side.
No new options can be added, but those present in SuggestedOptions can be omitted or replaced with
new values in AcceptedOptions.
This is followed by a call to open/4 before any read/write access is performed. AcceptedOptions is
sent to the server, which replies with the options that it accepts. These are then forwarded to
open/4 as SuggestedOptions.
Module:read(State) -> {more, Bin, NewState} | {last, Bin, FileSize} | {error, {Code, Text}}
Types:
State = NewState = term()
Bin = binary()
FileSize = int()
Code = undef | enoent | eacces | enospc
| badop | eexist | baduser | badopt
| int()
Text = string()
Reads a chunk from the file.
The callback function is expected to close the file when the last file chunk is encountered. When
an error is encountered, the callback function is expected to clean up after the aborted file
transfer, such as closing open file descriptors, and so on. In both cases there will be no more
calls to any of the callback functions.
Module:write(Bin, State) -> {more, NewState} | {last, FileSize} | {error, {Code, Text}}
Types:
Bin = binary()
State = NewState = term()
FileSize = int()
Code = undef | enoent | eacces | enospc
| badop | eexist | baduser | badopt
| int()
Text = string()
Writes a chunk to the file.
The callback function is expected to close the file when the last file chunk is encountered. When
an error is encountered, the callback function is expected to clean up after the aborted file
transfer, such as closing open file descriptors, and so on. In both cases there will be no more
calls to any of the callback functions.
LOGGER FUNCTIONS
A tftp_logger callback module is to be implemented as a tftp_logger behavior and export the following
functions:
EXPORTS
Logger:error_msg(Format, Data) -> ok | exit(Reason)
Types:
Format = string()
Data = [term()]
Reason = term()
Logs an error message. See error_logger:error_msg/2 for details.
Logger:info_msg(Format, Data) -> ok | exit(Reason)
Types:
Format = string()
Data = [term()]
Reason = term()
Logs an info message. See error_logger:info_msg/2 for details.
Logger:warning_msg(Format, Data) -> ok | exit(Reason)
Types:
Format = string()
Data = [term()]
Reason = term()
Logs a warning message. See error_logger:warning_msg/2 for details.