Provided by: freebsd-manpages_12.0-1_all 
NAME
send — Kernel side support for Secure Neighbor Discovery (SeND)
SYNOPSIS
#include <sys/socket.h>
#include <netinet/in.h>
#include <netinet6/send.h>
int
socket(PF_INET6, SOCK_RAW, IPPROTO_SEND);
To load the driver as a module at boot time, place the following line in loader.conf(5):
send_load="YES"
DESCRIPTION
IPv6 nodes use the Neighbor Discovery Protocol (NDP) to discover other nodes on the link, to
determine their link-layer addresses to find routers, and to maintain reachability
information about the paths to active members. NDP is vulnerable to various attacks
[RFC3756]. Secure Neighbor Discovery is a set of extensions to NDP that counter threats to
NDP [RFC3971].
Kernel side support for SeND consists of a kernel module with hooks that divert relevant
packets (Neighbor Solicitations, Neighbor Advertisements, Router Solicitations, Router
Advertisements and Redirects) from the NDP stack, send them to user space on a dedicated
socket and reinject them back for further processing. Hooks are triggered only if the send
module is loaded.
The native SeND socket is similar to a raw IP socket, but with its own, internal pseudo-
protocol (IPPROTO_SEND). Struct sockaddr_send is defined in <netinet6/send.h>. It defines
the total length of the structure, the address family, packet's incoming or outgoing
direction from the interface's point of view, and the interface index.
struct sockaddr_send {
unsigned char send_len; /* total length */
sa_family_t send_family; /* address family */
int send_direction;
int send_ifidx;
char send_zero[8];
};
The address family is always AF_INET6. The send_direction variable denotes the direction of
the packet from the interface's point of view and has either the value SND_IN or SND_OUT.
The send_ifidx variable is the interface index of the receiving or sending interface. The
send_zero variable is padding and must always be zero.
In case that no user space application is connected to the send socket, processing continues
normally as if the module was not loaded.
INPUT HOOK
The input hook is named after the input path of the incoming or outgoing NDP packets, on the
way from the wire, through the nd6 stack, to user space. Relevant packets are identified by
adding an mbuf_tag (see mbuf_tags(9)) to the mbuf(9), if the send module is loaded. It is
then passed on to the kernel-userland interface for either cryptographic protection or
validation by the SeND application. The hook takes an argument that describes the direction
of the packet, both in case of incoming and outgoing packets. SND_IN is the direction of
the incoming packets that are usually protected by the SeND options and then sent to user
space for cryptographic validation. SND_OUT is the outgoing direction. It describes both
reply and locally originated outgoing packets that are sent to user space for the addition
of SeND options.
INCOMING PACKETS
The incoming ND packet from the wire:
kernelspace ( userspace
)
incoming SeND/ND packet (
| )
v ( SND_IN ) (
icmp6_input() -> send_input_hook ---> send socket ----+
: ) |
: # # ( |
normal : # # ) v
processing : # send.ko # ( SeND application
path : # # ) |
: # # ( |
v ) |
icmp6/nd6_??_input() <- protocol switch <--- send socket <---+
| structure (IPPPROTO_SEND) )
| ( SND_IN ) (
v )
continue normal ND processing (
OUTGOING PACKETS
Outgoing ND packet (reply or locally triggered):
kernelspace ( userspace
)
nd6_na_input() (
+PACKET_TAG_ND_OUTGOING )
| )
| outgoing packet (
| | )
| v (
| icmp6_redirect_output() )
| nd6_ns_output() (
| nd6_na_output() )
| +PACKET_TAG_ND_OUTGOING (
| | )
| +-----------<- rip6_output() <----------)----- rtsol/rtadvd/..
| | +PACKET_TAG_ND_OUTGOING (
| v )
| ip6_output() (
| | )
+-------->-+ (
| )
v ( SND_OUT ) (
nd6_output_lle() -> send_input_hook ---> send socket ----+
-PACKET_TAG_ND_OUTGOING ) |
: # # ( |
normal : # # ) v
processing : # send.ko # ( SeND application
path : # # ) |
: # # ( |
v ) |
(*ifp->if_output)() <- protocol switch <--- send socket <---+
| structure (IPPPROTO_SEND) )
| ( SND_OUT ) (
v )
continue with normal packet output (
ERRORS
A socket operation may fail with one of the following errors returned:
[EEXIST] Another user space SeND application is bound to the socket.
[ENOBUFS] Shortage of space to receive the incoming (SeND-protected) or outgoing
(SeND-validated) packet from the SeND application.
[ENOSYS] A packet received from user space and passed to the NDP stack for further
processing is neither Neighbor Solicitation, Neighbor Advertisement,
Router Solicitation, Router Advertisement nor Redirect.
[ENOENT] Occurs if interface output routines fail to send the packet out of the
interface.
SEE ALSO
recvfrom(2), sendto(2), socket(2), loader.conf(5)
HISTORY
The send module first appeared in FreeBSD 9.0.
AUTHORS
Ana Kukec <anchie@FreeBSD.org>, University of Zagreb
BUGS
Due to the lack of NDP locking, it is currently not possible to unload the send module.