Ubuntu Manpage: object-server.conf - configuration file for the OpenStack Swift object server

Provided by: swift-object_2.25.2-0ubuntu1.1_all

NAME

       object-server.conf - configuration file for the OpenStack Swift object server

SYNOPSIS

       object-server.conf

DESCRIPTION

       This  is  the  configuration  file  used  by the object server and other object background
       services, such as; replicator, reconstructor, updater, auditor, and expirer.

       The configuration file follows the python-pastedeploy syntax. The  file  is  divided  into
       sections,  which  are  enclosed  by  square  brackets. Each section will contain a certain
       number of key/value parameters which are described later.

       Any line that begins with a '#' symbol is ignored.

       You  can  find  more  information  about  python-pastedeploy   configuration   format   at
       http://pythonpaste.org/deploy/#config-format

GLOBAL SECTION

This is indicated by section named [DEFAULT]. Below are the parameters that are acceptable
within this section.

bind_ip
IP address the object server should bind to. The default is 0.0.0.0 which will make
it bind to all available addresses.

bind_port
TCP port the object server should bind to. The default is 6200.

keep_idle
Value to set for socket TCP_KEEPIDLE. The default value is 600.

bind_timeout
Timeout to bind socket. The default is 30.

backlog
TCP backlog. Maximum number of allowed pending connections. The default value is
4096.

workers
The number of pre-forked processes that will accept connections. Zero means no
fork. The default is auto which will make the server try to match the number of
effective cpu cores if python multiprocessing is available (included with most
python distributions >= 2.6) or fallback to one. It's worth noting that individual
workers will use many eventlet co-routines to service multiple concurrent requests.

max_clients
Maximum number of clients one worker can process simultaneously (it will actually
accept(2) N + 1). Setting this to one (1) will only handle one request at a time,
without accepting another request concurrently. The default is 1024.

user The system user that the object server will run as. The default is swift.

swift_dir
Swift configuration directory. The default is /etc/swift.

devices
Parent directory of where devices are mounted. Default is /srv/node.

mount_check
Whether or not check if the devices are mounted to prevent accidentally writing to
the root device. The default is set to true.

disable_fallocate
Disable pre-allocate disk space for a file. The default is false.

expiring_objects_container_divisor
The default is 86400.

expiring_objects_account_name
Account name used for legacy style expirer task queue. The default is
'expiring_objects'.

servers_per_port
Make object-server run this many worker processes per unique port of "local" ring
devices across all storage policies. The default value of 0 disables this feature.

log_name
Label used when logging. The default is swift.

log_facility
Syslog log facility. The default is LOG_LOCAL0.

log_level
Logging level. The default is INFO.

log_address
Logging address. The default is /dev/log.

log_max_line_length
The following caps the length of log lines to the value given; no limit if set to
0, the default.

log_custom_handlers
Comma separated list of functions to call to setup custom log handlers. functions
get passed: conf, name, log_to_console, log_route, fmt, logger, adapted_logger. The
default is empty.

log_udp_host
If set, log_udp_host will override log_address.

log_udp_port
UDP log port, the default is 514.

log_statsd_host
StatsD server. IPv4/IPv6 addresses and hostnames are supported. If a hostname
resolves to an IPv4 and IPv6 address, the IPv4 address will be used.

log_statsd_port
The default is 8125.

log_statsd_default_sample_rate
The default is 1.

log_statsd_sample_rate_factor
The default is 1.

log_statsd_metric_prefix
The default is empty.

eventlet_debug
Debug mode for eventlet library. The default is false.

fallocate_reserve
You can set fallocate_reserve to the number of bytes or percentage of disk space
you'd like fallocate to reserve, whether there is space for the given file size or
not. Percentage will be used if the value ends with a '%'. The default is 1%.

node_timeout
Request timeout to external services. The default is 3 seconds.

conn_timeout
Connection timeout to external services. The default is 0.5 seconds.

container_update_timeout
Time to wait while sending a container update on object update. The default is 1
second.

client_timeout
Time to wait while receiving each chunk of data from a client or another backend
node. The default is 60.

network_chunk_size
The default is 65536.

disk_chunk_size
The default is 65536.

reclaim_age
Time elapsed in seconds before an object can be reclaimed. The default is 604800
seconds.

nice_priority
Modify scheduling priority of server processes. Niceness values range from -20
(most favorable to the process) to 19 (least favorable to the process). The
default does not modify priority.

ionice_class
Modify I/O scheduling class of server processes. I/O niceness class values are
IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE
(idle). The default does not modify class and priority. Work only with
ionice_priority.

ionice_priority
Modify I/O scheduling priority of server processes. I/O niceness priority is a
number which goes from 0 to 7. The higher the value, the lower the I/O priority of
the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.

PIPELINE SECTION

       This  is  indicated  by  section  name  [pipeline:main]. Below are the parameters that are
       acceptable within this section.

       pipeline
              It is used when you need to apply a number of filters. It  is  a  list  of  filters
              ended by an application. The normal pipeline is "healthcheck recon object-server".

APP SECTION

This is indicated by section name [app:object-server]. Below are the parameters that are
acceptable within this section.

use Entry point for paste.deploy for the object server. This is the reference to the
installed python egg. This is normally egg:swift#object.

set log_name
Label used when logging. The default is object-server.

set log_facility
Syslog log facility. The default is LOG_LOCAL0.

set log_level
Logging level. The default is INFO.

set log_requests
Enables request logging. The default is True.

set log_address
Logging address. The default is /dev/log.

max_upload_time
The default is 86400.

slow The default is 0.

keep_cache_size
Objects smaller than this are not evicted from the buffercache once read. The
default is 5242880.

keep_cache_private
If true, objects for authenticated GET requests may be kept in buffer cache if
small enough. The default is false.

mb_per_sync
On PUTs, sync data every n MB. The default is 512.

allowed_headers
Comma separated list of headers that can be set in metadata on an object. This
list is in addition to X-Object-Meta-* headers and cannot include Content-Type,
etag, Content-Length, or deleted. The default is 'Content-Disposition, Content-
Encoding, X-Delete-At, X-Object-Manifest, X-Static-Large-Object, Cache-Control,
Content-Language, Expires, X-Robots-Tag'.

auto_create_account_prefix [deprecated]
The default is '.'. Should be configured in swift.conf instead.

replication_server
Configure parameter for creating specific server To handle all verbs, including
replication verbs, do not specify "replication_server" (this is the default). To
only handle replication, set to a True value (e.g. "True" or "1"). To handle only
non-replication verbs, set to "False". Unless you have a separate replication
network, you should not specify any value for "replication_server".

replication_concurrency
Set to restrict the number of concurrent incoming SSYNC requests Set to 0 for
unlimited (the default is 4). Note that SSYNC requests are only used by the object
reconstructor or the object replicator when configured to use ssync.

replication_concurrency_per_device
Set to restrict the number of concurrent incoming SSYNC requests per device; set to
0 for unlimited requests per devices. This can help control I/O to each device.
This does not override replication_concurrency described above, so you may need to
adjust both parameters depending on your hardware or network capacity. Defaults to
1.

replication_lock_timeout
Number of seconds to wait for an existing replication device lock before giving up.
The default is 15.

replication_failure_threshold

replication_failure_ratio
These two settings control when the SSYNC subrequest handler will abort an incoming
SSYNC attempt. An abort will occur if there are at least threshold number of
failures and the value of failures / successes exceeds the ratio. The defaults of
100 and 1.0 means that at least 100 failures have to occur and there have to be
more failures than successes for an abort to occur.

splice Use splice() for zero-copy object GETs. This requires Linux kernel version 3.0 or
greater. If you set "splice = yes" but the kernel does not support it, error
messages will appear in the object server logs at startup, but your object servers
should continue to function. The default is false.

node_timeout
Request timeout to external services. The default is 3 seconds.

conn_timeout
Connection timeout to external services. The default is 0.5 seconds.

container_update_timeout
Time to wait while sending a container update on object update. The default is 1
second.

FILTER SECTION

Any section that has its name prefixed by "filter:" indicates a filter section. Filters
are used to specify configuration parameters for specific swift middlewares. Below are
the filters available and respective acceptable parameters.

[filter:healthcheck]

use Entry point for paste.deploy for the healthcheck middleware. This is the
reference to the installed python egg. This is normally egg:swift#healthcheck.

disable_path
An optional filesystem path which, if present, will cause the healthcheck URL to
return "503 Service Unavailable" with a body of "DISABLED BY FILE".

[filter:recon]

use Entry point for paste.deploy for the recon middleware. This is the reference to
the installed python egg. This is normally egg:swift#recon.

recon_cache_path
The recon_cache_path simply sets the directory where stats for a few items will
be stored. Depending on the method of deployment you may need to create this
directory manually and ensure that swift has read/write. The default is
/var/cache/swift.

recon_lock_path
The default is /var/lock.

[filter:xprofile]

use Entry point for paste.deploy for the xprofile middleware. This is the reference
to the installed python egg. This is normally egg:swift#xprofile.

profile_module
This option enable you to switch profilers which should inherit from python
standard profiler. Currently the supported value can be 'cProfile',
'eventlet.green.profile' etc.

log_filename_prefix
This prefix will be used to combine process ID and timestamp to name the profile
data file. Make sure the executing user has permission to write into this path
(missing path segments will be created, if necessary). If you enable profiling
in more than one type of daemon, you must override it with an unique value like,
the default is /var/log/swift/profile/account.profile.

dump_interval
The profile data will be dumped to local disk based on above naming rule in this
interval. The default is 5.0.

dump_timestamp
Be careful, this option will enable profiler to dump data into the file with
time stamp which means there will be lots of files piled up in the directory.
The default is false

path This is the path of the URL to access the mini web UI. The default is
__profile__.

flush_at_shutdown
Clear the data when the wsgi server shutdown. The default is false.

unwind Unwind the iterator of applications. Default is false.

ADDITIONAL SECTIONS

The following sections are used by other swift-object services, such as replicator,
updater, auditor.

[object-replicator]

log_name
Label used when logging. The default is object-replicator.

log_facility
Syslog log facility. The default is LOG_LOCAL0.

log_level
Logging level. The default is INFO.

log_address
Logging address. The default is /dev/log.

daemonize
Whether or not to run replication as a daemon. The default is yes.

run_pause [deprecated]
Time in seconds to wait between replication passes. The default is 30.

interval
Time in seconds to wait between replication passes. The default is 30.

concurrency
Number of replication workers to spawn. The default is 1.

stats_interval
Interval in seconds between logging replication statistics. The default is 300.

sync_method
The sync method to use; default is rsync but you can use ssync to try the
EXPERIMENTAL all-swift-code-no-rsync-callouts method. Once ssync is verified as
having performance comparable to, or better than, rsync, we plan to deprecate
rsync so we can move on with more features for replication.

rsync_timeout
Max duration of a partition rsync. The default is 900 seconds.

rsync_io_timeout
Passed to rsync for I/O OP timeout. The default is 30 seconds.

rsync_compress
Allow rsync to compress data which is transmitted to destination node during
sync. However, this is applicable only when destination node is in a different
region than the local one. NOTE: Objects that are already compressed (for
example: .tar.gz, .mp3) might slow down the syncing process. The default is
false.

rsync_module
Format of the rsync module where the replicator will send data. See
etc/rsyncd.conf-sample for some usage examples. The default is empty.

node_timeout
Request timeout to external services. The default is 10 seconds.

rsync_bwlimit
Passed to rsync for bandwidth limit in kB/s. The default is 0 (unlimited).

http_timeout
Max duration of an HTTP request. The default is 60 seconds.

lockup_timeout
Attempts to kill all workers if nothing replicates for lockup_timeout seconds.
The default is 1800 seconds.

ring_check_interval
The default is 15.

rsync_error_log_line_length
Limits how long rsync error log lines are. 0 (default) means to log the entire
line.

handoffs_first
The flag to replicate handoffs prior to canonical partitions. It allows one to
force syncing and deleting handoffs quickly. If set to a True value(e.g. "True"
or "1"), partitions that are not supposed to be on the node will be replicated
first. The default is false.

handoff_delete
The number of replicas which are ensured in swift. If the number less than the
number of replicas is set, object-replicator could delete local handoffs even if
all replicas are not ensured in the cluster. Object-replicator would remove
local handoff partition directories after syncing partition when the number of
successful responses is greater than or equal to this number. By default(auto),
handoff partitions will be removed when it has successfully replicated to all
the canonical nodes.

The handoffs_first and handoff_delete are options for a special case such as
disk full in the cluster. These two options SHOULD NOT BE CHANGED, except for
such an extreme situations. (e.g. disks filled up or are about to fill up.
Anyway, DO NOT let your drives fill up).

ionice_priority
Modify I/O scheduling priority of server processes. I/O niceness priority is a
number which goes from 0 to 7. The higher the value, the lower the I/O priority
of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is
set.

[object-reconstructor]

log_name
Label used when logging. The default is object-reconstructor.