Ubuntu Manpage: sane-canon_dr - SANE backend for Canon DR-series scanners

Provided by: libsane-common_1.0.29-0ubuntu5.2_all

NAME

       sane-canon_dr - SANE backend for Canon DR-series scanners

DESCRIPTION

       The  sane-canon_dr  library  implements  a  SANE  (Scanner  Access Now Easy) backend which
       provides access to some Canon DR-series scanners.

       This document describes backend version 57, which shipped with SANE 1.0.28.

SUPPORTED HARDWARE

       This  version  has  only  been  tested   with   a   few   scanner   models.   Please   see
       http://www.sane-project.org/sane-supported-devices.html for the most recent list.

       This  backend may support other Canon scanners. The best way to determine level of support
       is to test the scanner directly, or to collect a trace of the windows  driver  in  action.
       Please contact the author for help or with test results.

       In  general,  the  larger  machines  (DR-4000  and up) which have been tested use a fairly
       complete protocol, with hardware support for many modes,  resolutions  and  features.  The
       smaller  machines  have  many  limitations,  like  missing horizontal resolutions, missing
       binary mode, always scanning full-width, etc.  There is code in  the  backend  to  address
       these  problems, but there seems to be no way to detect if they are required, so they must
       be hard-coded.

OPTIONS

Effort has been made to expose most hardware options, including:

source s
Selects the source for the scan. Options may include "Flatbed", "ADF Front", "ADF
Back", "ADF Duplex".

mode m
Selects the mode for the scan. Options may include "Lineart", "Halftone", "Gray",
and "Color".

resolution
Controls scan resolution.

tl-x, tl-y, br-x, br-y
Sets scan area upper left and lower right coordinates. These are renamed t, l, x, y
by some frontends.

page-width, page-height
Sets paper size. Used by scanner to determine centering of scan coordinates when
using ADF and to detect double feed errors.

Other options will be available based on the capabilities of the scanner: enhancement,
compression, buttons and sensors, etc.

Additionally, several 'software' options are exposed by the backend. These are
reimplementations of features provided natively by larger scanners, but running on the
host computer. This enables smaller machines to have similar capabilities. Please note
that these features are somewhat simplistic, and may not perform as well as the native
implementations. Note also that these features all require that the driver cache the
entire image in memory. This will almost certainly result in a reduction of scanning
speed.

swcrop
Requests the driver to detect the extremities of the paper within the larger image,
and crop the empty edges.

swdeskew
Requests the driver to detect the rotation of the paper within the larger image,
and counter the rotation.

swdespeck X
Requests the driver to find and remove dots of X diameter or smaller from the
image, and fill the space with the average surrounding color.

Use 'scanimage --help' to get a list, but be aware that some options may be settable only
when another option has been set, and that advanced options may be hidden by some frontend
programs.

CONFIGURATION FILE

The configuration file "canon_dr.conf" is used to tell the backend how to look for
scanners, and provide options controlling the operation of the backend. This file is read
each time the frontend asks the backend for a list of scanners, generally only when the
frontend starts. If the configuration file is missing, the backend will fail to run.

Scanners can be specified in the configuration file in 4 ways:

"scsi CANON DR"
Requests backend to search all scsi busses in the system for a device which reports
itself to be a scanner made by 'CANON', with a model name starting with 'DR'.

"scsi /dev/sg0" (or other scsi device file)
Requests backend to open the named scsi device. Only useful if you have multiple
compatible scanners connected to your system, and need to specify one. Probably
should not be used with the other "scsi" line above.

"usb 0x04a9 0x1603" (or other vendor/product ids)
Requests backend to search all usb busses in the system for a device which uses
that vendor and product id. The device will then be queried to determine if it is a
Canon scanner.

"usb /dev/usb/scanner0" (or other device file)
Some systems use a kernel driver to access usb scanners. This method is untested.

Besides the 'scsi' and 'usb' lines, the configuration file supports the following 'option'
lines:

"option buffer-size [number of bytes]"
Set the number of bytes in the data buffer to something other than the compiled-in
default of 4MB. Large values may cause timeouts or hangs, small values may cause
slow scans.

Note: The backend does not place an upper bound on this value, as some users
required it to be quite large. Values above the default are not recommended, and
may crash your OS or lockup your scsi card driver. You have been warned.

"option vendor-name [string of text]"
"option model-name [string of text]"
"option version-name [string of text]"
These options can be used collectively to override the values provided by the
scanner, or to provide the values when the scanner cannot.

"option padded-read [0|1]"
Some scanners prepend all data transmitted to host with 12 bytes. Enable this
option if the scanner fails to respond to commands.

"option duplex-offset [integer]"
Some scanners pad the upper edge of one side of a duplex scan. There is some
variation in the amount of padding. Modify this option if your unit shows an
unwanted band of image data on only one side.

Note: 'option' lines may appear multiple times in the configuration file. They only apply
to scanners discovered by the next 'scsi/usb' line.

ENVIRONMENT

       The backend  uses  a  single  environment  variable,  SANE_DEBUG_CANON_DR,  which  enables
       debugging output to stderr. Valid values are:

              5  Errors
              10 Function trace
              15 Function detail
              20 Option commands
              25 SCSI/USB trace
              30 SCSI/USB detail
              35 Useless noise

KNOWN ISSUES

       This  backend  was  entirely reverse engineered from usb traces of the proprietary driver.
       Various advanced features of the machines may not be enabled. Many machines have not  been
       tested. Their protocol is unknown.

CREDITS

       The various authors of the sane-fujitsu backend provided useful code
       Yabarana Corp. www.yabarana.com provided significant funding
       EvriChart, Inc. www.evrichart.com provided funding and loaned equipment
       Canon, USA. www.usa.canon.com loaned equipment
       HPrint hprint.com.br provided funding and testing for DR-2510 support
       Stone-IT www.stone-it.com provided funding for DR-2010 and DR-2050 support
       Gerhard Pfeffer provided access and testing for P-208 and P-215
       Special  thanks  to:  Alejandro  Imass,  Andre  Shimakawa,  Martijn  van Brummelen, Thanos
       Diacakis and Junren Shi for testing and feedback.

AUTHOR

       m. allan noah: <kitno455 a t gmail d o t com>

@PACKAGEVERSION@                           31 Aug 2015                           sane-canon_dr(5)