Ubuntu Manpage: sane-fujitsu - SANE backend for Fujitsu flatbed and ADF scanners

Provided by: libsane-common_1.0.29-0ubuntu5.2_all

NAME

       sane-fujitsu - SANE backend for Fujitsu flatbed and ADF scanners

DESCRIPTION

       The  sane-fujitsu  library  implements  a  SANE  (Scanner  Access  Now Easy) backend which
       provides access to most Fujitsu flatbed and ADF scanners.

       This document describes backend version 134, which shipped with SANE 1.0.28.

SUPPORTED HARDWARE

       This version supports every known model which speaks the Fujitsu  SCSI  and  SCSI-over-USB
       protocols.  Specifically, the SCSI M309x and M409x series, the SCSI fi-series, most of the
       USB fi-series, the USB ScanSnap S5xx/S15xx, and the  USB  iX1xx/5xx  series  scanners  are
       supported.  Please see the list at http://www.sane-project.org/sane-supported-devices.html
       for details.

       This backend may support other Fujitsu scanners.  The  best  way  to  determine  level  of
       support  is  to  test the scanner directly, or to collect a trace of the windows driver in
       action.  Please contact the author for help or with test results.

UNSUPPORTED HARDWARE

       The following scanners are known NOT to work with this backend, either because they have a
       non-fujitsu  chipset,  or  an  unsupported  interface  type. Some of these scanners may be
       supported by another backend.

              --------------------------------------
              SCSI:        SERIAL:      USB:
              ------------ ------------ ------------
              ScanStation  M3093E/DE/EX fi-4110EOX/2
              ScanPartner  M3096EX      fi-4010CU
              SP-Jr        M3097E+/DE   S300/S300M
              SP-10/10C    M3099A/EH/EX S1300/S1100
              SP-15C/300C               fi-60F/65F
              SP-600C/620C              fi-5015C
                                        SP-2x/3x

OPTIONS

Effort has been made to expose all hardware options, including:

source s
Selects the source for the scan. Options may include "Flatbed", "ADF Front", "ADF
Back", "ADF Duplex".

mode m
Selects the mode for the scan. Options may include "Lineart", "Halftone", "Gray",
and "Color".

resolution, y-resolution
Controls scan resolution. Setting --resolution also sets --y-resolution, though
this behavior is overridden by some frontends.

tl-x, tl-y, br-x, br-y
Sets scan area upper left and lower right coordinates. These are renamed t, l, x, y
by some frontends.

page-width, page-height
Sets paper size. Used by scanner to determine centering of scan coordinates when
using ADF and to detect double feed errors.

Other options will be available based on the capabilities of the scanner: machines with
IPC or DTC will have additional enhancement options, those with CMP will have compression
options, those with a printer will have a group of endorser options.

Additionally, several 'software' options are exposed by the backend. These are
reimplementations of features provided natively by larger scanners, but running on the
host computer. This enables smaller machines to have similar capabilities. Please note
that these features are somewhat simplistic, and may not perform as well as the native
implementations. Note also that these features all require that the driver cache the
entire image in memory. This will almost certainly result in a reduction of scanning
speed.

Use 'scanimage --help' to get a list, but be aware that some options may be settable only
when another option has been set, and that advanced options may be hidden by some frontend
programs.

CONFIGURATION FILE

The configuration file "fujitsu.conf" is used to tell the backend how to look for
scanners, and provide options controlling the operation of the backend. This file is read
each time the frontend asks the backend for a list of scanners, generally only when the
frontend starts. If the configuration file is missing, the backend will be unable to
locate any scanners.

Scanners can be specified in the configuration file in 4 ways:

"scsi FUJITSU"
Requests backend to search all scsi busses in the system for a device which reports
itself to be a scanner made by 'FUJITSU'.

"scsi /dev/sg0" (or other scsi device file)
Requests backend to open the named scsi device. Only useful if you have multiple
compatible scanners connected to your system, and need to specify one. Probably
should not be used with the other "scsi" line above.

"usb 0x04c5 0x1042" (or other vendor/product ids)
Requests backend to search all usb busses in the system for a device which uses
that vendor and product id. The device will then be queried to determine if it is a
Fujitsu scanner.

"usb /dev/usb/scanner0" (or other device file)
Some systems use a kernel driver to access usb scanners. This method is untested.

The only configuration option supported is "buffer-size=xxx", allowing you to set the
number of bytes in the data buffer to something other than the compiled-in default, 65536
(64K). Some users report that their scanner will "hang" mid-page, or fail to transmit the
image if the buffer is not large enough.

Note: This option may appear multiple times in the configuration file. It only applies to
scanners discovered by 'scsi/usb' lines that follow this option.

Note: The backend does not place an upper bound on this value, as some users required it
to be quite large. Values above the default are not recommended, and may crash your OS or
lockup your scsi card driver. You have been warned.

ENVIRONMENT

       The  backend  uses  a  single  environment  variable,  SANE_DEBUG_FUJITSU,  which  enables
       debugging output to stderr. Valid values are:

              5  Errors
              10 Function trace
              15 Function detail
              20 Option commands
              25 SCSI/USB trace
              30 SCSI/USB writes
              31 SCSI/USB reads
              35 Useless noise

KNOWN ISSUES

       Flatbed units may fail to scan at maximum area, particularly at high resolution.

       Any  model that does not support VPD during inquiry will not function until an override is
       added to the backend.

       CCITT Fax compression used by older scanners is not supported.

       JPEG output is supported by the backend, but not by the SANE protocol, so is  disabled  in
       this release. It can be enabled if you rebuild from source.

CREDITS

       m3091 backend: Frederik Ramm <frederik a t remote d o t org>
       m3096g backend: Randolph Bentson <bentson a t holmsjoen d o t com>
         (with credit to the unnamed author of the coolscan driver)
       fujitsu backend, m3093, fi-4340C, ipc, cmp, long-time maintainer:
         Oliver Schirrmeister <oschirr a t abm d o t de>
       m3092: Mario Goppold <mgoppold a t tbzpariv d o t tcc-chemnitz dot de>
       fi-4220C and basic USB support: Ron Cemer <ron a t roncemer d o t com>
       fi-4120, fi-series color, backend re-write, jpeg, current maintainer:
         m. allan noah: <kitno455 a t gmail d o t com>

       JPEG output and low memory usage support funded by:
         Archivista GmbH
         www.archivista.ch

       Endorser support funded by:
         O A S Oilfield Accounting Service Ltd
         1500, 840 - 7th Avenue S.W.
         Calgary, Alberta
         T2P 3G2 Canada
         1-403-263-2600
         www.oas.ca

       Automatic length detection support funded by:
         Martin G. Miller
         mgmiller at optonline.net

       Hardware donated, software image enhancement and fi-6/7xxx support funded by:
         Fujitsu Computer Products of America, Inc.
         www.fcpa.com

       iX500 support funded by:
         Prefix Computer Services
         www.prefixservice.com

AUTHOR

       m. allan noah: <kitno455 a t gmail d o t com>

@PACKAGEVERSION@                           08 Apr 2017                            sane-fujitsu(5)