Ubuntu Manpage: libvmmalloc - general purpose volatile memory allocation library

name
synopsis
description
environment
caveats
debugging
notes
bugs
acknowledgements
see also

Provided by: libvmmalloc-dev_1.8-1_amd64

NAME

       libvmmalloc - general purpose volatile memory allocation library

SYNOPSIS

              $ LD_PRELOAD=libvmmalloc.so.1 command [ args... ]

       or

              #include <stdlib.h>
              #ifndef __FreeBSD__
                  #include <malloc.h>
              #else
                  #include <malloc_np.h>
              #endif
              #include <libvmmalloc.h>

              cc [ flag... ] file... -lvmmalloc [ library... ]

              void *malloc(size_t size);
              void free(void *ptr);
              void *calloc(size_t number, size_t size);
              void *realloc(void *ptr, size_t size);
              int posix_memalign(void **memptr, size_t alignment, size_t size);
              void *aligned_alloc(size_t alignment, size_t size);
              void *memalign(size_t alignment, size_t size);
              void *valloc(size_t size);
              void *pvalloc(size_t size);
              size_t malloc_usable_size(const void *ptr);
              void cfree(void *ptr);

DESCRIPTION

libvmmalloc transparently converts all dynamic memory allocations into Persistent Memory allocations.

The typical usage of libvmmalloc does not require any modification of the target program. It is enough
to load libvmmalloc before all other libraries by setting the environment variable LD_PRELOAD. When used
in that way, libvmmalloc interposes the standard system memory allocation routines, as defined in
malloc(3), posix_memalign(3) and malloc_usable_size(3), and provides that all dynamic memory allocations
are made from a memory pool built on a memory-mapped file, instead of the system heap. The memory
managed by libvmmalloc may have different attributes, depending on the file system containing the
memory-mapped file.

This library is no longer actively developed, and is in maintenance mode, same as its underlying code
backend (libvmem). It is mature, and is expected to be supported for foreseable future.

libvmmalloc may be also linked to the program, by providing the **-lvmmalloc* argument to the linker.
Then it becomes the default memory allocator for the program.

NOTE: Due to the fact the library operates on a memory-mapped file, it may not work properly with
programs that perform fork(2) not followed by exec(3). There are two variants of experimental
fork(2) support available in libvmmalloc. The desired library behavior may be selected by setting
the VMMALLOC_FORK environment variable. By default variant #1 is enabled. See ENVIRONMENT for
more details.

libvmmalloc uses the mmap(2) system call to create a pool of volatile memory. The library is most useful
when used with Direct Access storage (DAX), which is memory-addressable persistent storage that supports
load/store access without being paged via the system page cache. A Persistent Memory-aware file system
is typically used to provide this type of access. Memory-mapping a file from a Persistent Memory-aware
file system provides the raw memory pools, and this library supplies the traditional malloc interfaces on
top of those pools.

The memory pool acting as a system heap replacement is created automatically at library initialization
time. The user may control its location and size by setting the environment variables described in
ENVIRONMENT, below. The allocated file space is reclaimed when the process terminates or in case of
system crash.

Under normal usage, libvmmalloc will never print messages or intentionally cause the process to exit.
The library uses pthreads(7) to be fully MT-safe, but never creates or destroys threads itself. The
library does not make use of any signals, networking, and never calls select(2) or poll(2).

ENVIRONMENT

The VMMALLOC_POOL_DIR and VMMALLOC_POOL_SIZE environment variables must be set for libvmmalloc to work
properly. If either of them is not specified, or if their values are not valid, the library prints an
appropriate error message and terminates the process. Any other environment variables are optional.

• VMMALLOC_POOL_DIR=path

Specifies a path to the directory where the memory pool file should be created. The directory must exist
and be writable.

• VMMALLOC_POOL_SIZE=len

Defines the desired size (in bytes) of the memory pool file. It must be not less than the minimum
allowed size VMMALLOC_MIN_POOL as defined in <libvmmalloc.h>.

NOTE: Due to the fact the library adds some metadata to the memory pool, the amount of actual
usable space is typically less than the size of the memory pool file.

• VMMALLOC_FORK=val (EXPERIMENTAL)

VMMALLOC_FORK controls the behavior of libvmmalloc in case of fork(3), and can be set to the following
values:

• 0 - fork(2) support is disabled. The behavior of fork(2) is undefined in this case, but most likely
results in memory pool corruption and a program crash due to segmentation fault.

• 1 - The memory pool file is remapped with the MAP_PRIVATE flag before the fork completes. From this
moment, any access to memory that modifies the heap pages, both in the parent and in the child process,
will trigger creation of a copy of those pages in RAM (copy-on-write). The benefit of this approach is
that it does not significantly increase the time of the initial fork operation, and does not require
additional space on the file system. However, all subsequent memory allocations, and modifications of
any memory allocated before fork, will consume system memory resources instead of the memory pool.

This is the default option if VMMALLOC_FORK is not set.

• 2 - A copy of the entire memory pool file is created for the use of the child process. This requires
additional space on the file system, but both the parent and the child process may still operate on
their memory pools, not consuming system memory resources.

NOTE: In case of large memory pools, creating a copy of the pool file may stall the fork operation for
a quite long time.

• 3 - The library first attempts to create a copy of the memory pool (as for option #2), but if it fails
(i.e. because of insufficient free space on the file system), it will fall back to option #1.

NOTE: Options 2 and 3 are not currently supported on FreeBSD.

Environment variables used for debugging are described in DEBUGGING, below.

CAVEATS

       libvmmalloc  relies  on  the  library destructor being called from the main thread.  For this reason, all
       functions that might trigger destruction  (e.g.   dlclose(3))  should  be  called  in  the  main  thread.
       Otherwise some of the resources associated with that thread might not be cleaned up properly.

DEBUGGING

Two versions of libvmmalloc are typically available on a development system. The normal version is
optimized for performance. That version skips checks that impact performance and never logs any trace
information or performs any run-time assertions. A second version, accessed when using libraries from
/usr/lib/vmem_debug, contains run-time assertions and trace points. The typical way to access the debug
version is to set the LD_LIBRARY_PATH environment variable to /usr/lib/vmem_debug or
/usr/lib64/vmem_debug, as appropriate. Debugging output is controlled using the following environment
variables. These variables have no effect on the non-debug version of the library.

• VMMALLOC_LOG_LEVEL

The value of VMMALLOC_LOG_LEVEL enables trace points in the debug version of the library, as follows:

• 0 - Tracing is disabled. This is the default level when VMMALLOC_LOG_LEVEL is not set.

• 1 - Additional details on any errors detected are logged, in addition to returning the errno-based
errors as usual.

• 2 - A trace of basic operations is logged.

• 3 - Enables a very verbose amount of function call tracing in the library.

• 4 - Enables voluminous tracing information about all memory allocations and deallocations.

Unless VMMALLOC_LOG_FILE is set, debugging output is written to stderr.

• VMMALLOC_LOG_FILE

Specifies the name of a file where all logging information should be written. If the last character in
the name is “-”, the PID of the current process will be appended to the file name when the log file is
created. If VMMALLOC_LOG_FILE is not set, output is written to stderr.

• VMMALLOC_LOG_STATS

Setting VMMALLOC_LOG_STATS to 1 enables logging human-readable summary statistics at program termination.

NOTES

       Unlike the normal malloc(3), which asks the system for additional memory when it  runs  out,  libvmmalloc
       allocates the size it is told to and never attempts to grow or shrink that memory pool.

BUGS

       libvmmalloc  may not work properly with programs that perform fork(2) and do not call exec(3) immediately
       afterwards.  See ENVIRONMENT for more details about experimental fork(2) support.

       If logging is enabled in the debug version of the library and the process performs fork(2),  no  new  log
       file  is  created for the child process, even if the configured log file name ends with “-”.  All logging
       information from the child process will be written to the log file owned by the parent process, which may
       lead to corruption or partial loss of log data.

       Malloc hooks (see malloc_hook(3)), are not supported when using libvmmalloc.

ACKNOWLEDGEMENTS

       libvmmalloc  depends  on  jemalloc,  written  by Jason Evans, to do the heavy lifting of managing dynamic
       memory allocation.  See: <http://www.canonware.com/jemalloc>