Provided by: lcdproc_0.5.9-3_amd64 bug

NAME

       LCDd - LCDproc server daemon

SYNOPSIS

       LCDd  [-hf]  [-c config] [-d driver] [-i bool] [-a addr] [-p port] [-u user] [-w time] [-r
       level] [-s bool]

DESCRIPTION

       LCDd is the server part of LCDproc, a daemon which listens to  a  certain  port  (normally
       13666)  and displays information on an LCD display.  It works with several types and sizes
       of displays.

       Most settings of LCDd are configured through its configuration file  /etc/LCDd.conf,  some
       of  them  can  be  overridden  using command line options.  Before running LCDd you should
       carefully read through that file and modify everything necessary according to your  needs.
       Otherwise you might encounter LCDd not running properly on your system.

       To make full use of LCDd, a client such as lcdproc(1), lcdexec(1), or lcdvc is required.

OPTIONS

       Available options are:

       -h     Display help screen

       -c config
              Use a configuration file other than /etc/LCDd.conf

       -d driver
              Specify  a driver to use (output only to first), overriding the Driver parameter in
              the config file's [Server] section.

       -f     Run in the foreground, overriding the Foreground parameter  in  the  config  file's
              [Server]  section.   The  default,  if  not  specified  in  the  config file, is to
              daemonize LCDd as it is intended to operate in the background.

       -i bool
              Tell whether the to enable (1) or disable (0) showing the LCDproc server screen  in
              n  the  screen  rotation,  overriding  ServerScreen  in  the config file's [Server]
              section.

       -w waittime
              Time to pause at each screen (in seconds), overriding the WaitTime parameter in the
              config file's [Server] section.

       -a addr
              Bind  to  network  address addr, overriding the Bind parameter in the config file's
              [Server] section.

       -p port
              Listen on port port for incoming connections, overriding the Port parameter in  the
              config file's [Server] section.

       -u user
              Run  as  user  user,  overriding  the  User parameter in the config file's [Server]
              section.

       -s bool
              Output messages to syslog (1) or  to  stdout  (0),  overriding  the  ReportToSyslog
              parameter in the config file's [Server] section.

       -r level
              Set  reporting  level  to  level, overriding th ReportLevel parameter in the config
              file's [Server] section.

   SUPPORTED DRIVERS
       Currently supported display drivers include:

       bayrad BayRAD LCD modules by EMAC Inc.

       CFontz CrystalFontz CFA-632 and CFA-634 serial LCD displays

       CFontzPacket
              CrystalFontz CFA-533, CFA-631, CFA-633 and CFA-635 serial/USB LCD displays

       curses Standard video display using the (n)curses library

       CwLnx  serial/USB displays by Cwlinux (http://www.cwlinux.com)

       ea65   VFD front panel display on Aopen XC Cube EA65 media barebone

       EyeboxOne
              LCD display on the EyeboxOne

       futaba The Futaba TOSD-5711BB VFDisplay on Elonex Artisan/Scaleo Media Centre PCs

       g15    LCD display on the Logitech G15 keyboard

       glcd   generic driver for graphical LCDs with  FreeType  rendering  support.  This  driver
              supports the following sub-drivers (a.k.a. connection types):

              glcd2usb
                     Till       Harbaum's       open      source/open      hardware      GLCD2USB
                     (http://www.harbaum.org/till/glcd2usb/)

              picolcdgfx
                     picoLCD 256x64 Sideshow graphic LCD (Mini-Box.com)

              png    Write out screens as PNG images

              serdisplib
                     Uses serdisplib (http://serdisplib.sourceforge.net/) for output

              t6963  Toshiba T6963 based LCD displays (graphic mode)

       glcdlib
              graphical LCDs supported by graphlcd-base

       glk    Matrix Orbital GLK Graphic Displays

       hd44780
              Hitachi HD44780 LCD displays.   This  driver  supports  the  following  sub-drivers
              (a.k.a. connection types):

              4bit   LCD 4bit-mode, connected to a PC parallel port

              8bit   LCD 8bit-mode, connected to a PC parallel port

              serialLpt
                     LCD in 4bit-mode through a 4094 shift register

              winamp LCD in 8bit-mode using WinAmp-wiring, connected to a PC parallel port

              picanlcd
                     LCD  driven  by a PIC-an-LCD chip/board by Dale Wheat, connected to a serial
                     port

              lcdserializer
                     LCD driven by a PIC16C54-based piggy-back board, connected to a serial port

              los-panel
                     LCD driven by an Atmel AVR based board, connected to a serial port

              ezio   Portwell  EZIO-100  and  EZIO-300   LCD   connected   to   a   serial   port
                     (http://drivers.portwell.com/CA_Manual/EZIO/)

              vdr-lcd
                     ???, connected to a serial port

              vdr-wakeup
                     VDR-Wake module by Frank Jepsen (http://www.jepsennet.de/vdr/)

              pertelian
                     Pertelian X2040 module (http://pertelian.com/)

              lis2   LIS2 from VLSystem (http://www.vlsys.co.kr), connected to USB

              mplay  MPlay Blast from VLSystem (http://www.vlsys.co.kr), connected to USB

              usblcd LCD device from Adams IT Services (http://www.usblcd.de/)

              bwctusb
                     USB-to-HD44780 converter by BWCT (http://www.bwct.de)

              lcd2usb
                     Till       Harbaum's       open       source/open      hardware      LCD2USB
                     (http://www.harbaum.org/till/lcd2usb/)

              usbtiny
                     Devices based on Dick Streefland's USBtiny firmware

              uss720 USS-720  USB-to-IEEE  1284  Bridge  (Belkin  F5U002  USB  Parallel   Printer
                     Adapters)

              usb4all
                     Sprut's open source / open hardware USB-4-all (http://www.sprut.de/)

              ftdi   USB connection via a FTDI FT2232D chip in bitbang mode

              i2c    LCD in 4-bit mode driven by PCF8574(A) / PCA9554(A), connected via I2C bus

              piplate
                     Adafruit RGB Positive 16x2 LCD+Keypad for Raspberry Pi

              spi    LCD with KS0073 or equivalent in serial mode, connected via SPI bus

              pifacecad
                     PiFace Control and Display for the Raspberry Pi (http://www.piface.org.uk/)

              ethlcd TCP     connection     using     open     source/open     hardware    ethlcd
                     (http://manio.skyboo.net/ethlcd/)

              raspberrypi
                     LCD driven by the GPIO pins of a Raspberry Pi

              gpio   LCD connection via GPIO pins controlled by the linux sysfs interface

       i2500vfd
              140x32 pixel VFD Display of the Intra2net Intranator 2500 appliance

       icp_a106
              ICP Peripheral Communication Protocol alarm/LCD board used in QNAP devices and  19"
              rack cases made by ICP

       imon   iMON IR/VFD modules in cases by Soundgraph/Ahanix/Silverstone/Uneed/Accent

       imonlcd
              iMON IR/LCD modules in cases by Soundgraph/Ahanix/Silverstone/Uneed/Accent/Antec

       irtrans
              IRTrans  IR/VFD  modules  in  cases by Ahanix (e.g. MCE303) and possibly others May
              require irserver (http://www.irtrans.de/en/download/linux.php) to  be  running  for
              connectivity.

       IOWarrior
              Code Mercenaries IOWarrior

       irman  IrMan infrared (input)

       joy    Joystick driver (input)

       lb216  LB216 LCD displays

       lcdm001
              kernelconcepts.de 20x4 serial LCD displays

       lcterm serial LCD terminal from Helmut Neumark Elektronik (http://www.neumark.de)

       linux_input
              Linux event devices (input)

       lirc   Infrared (input)

       lis    L.I.S MCE 2005 20x2 VFD (http://vlsys.co.kr)

       MD8800 VFD displays in Medion MD8800 PCs

       mdm166a
              Futuba MDM166A displays

       ms6931 MSI-6931 displays in 1U rack servers by MSI

       mtc_s16209x
              MTC_S16209x LCD displays by Microtips Technology Inc

       MtxOrb Matrix Orbital displays (except Matrix Orbital GLK displays)

       mx5000 LCD display on the Logitech MX5000 keyboard

       NoritakeVFD
              Noritake VFD Device CU20045SCPB-T28A

       Olimex_MOD_LCD1x9
              Olimex MOD-LCD1x9 14 segment display

       rawserial
              Dumps the entire framebuffer to the serial port at a configurable rate.

       picolcd
              Mini-box.com USB LCD (PicoLCD 20x4 & picoLCD 20x2)

       pyramid
              LCD displays from Pyramid (http://www.pyramid.de)

       sdeclcd
              Watchguard Firebox LCD display based on SDEC LMC-S2D20 (http://www.sdec.com.tw)

       sed1330
              SED1330/SED1335 (aka S1D13300/S1D13305) based graphical displays

       sed1520
              122x32 pixel graphic displays based on SED1520 controllers

       serialPOS
              Driver  for  Point Of Sale ("POS") devices using various protocols (currently AEDEX
              only)

       serialVFD
              Text VFDs of various manufacturers,  see  LCDproc  user-documentation  for  further
              details.

       shuttleVFD
              Shuttle VFD (USB-based)

       sli    Wirz SLI driver (unknown)

       stv5730
              STV5730A on-screen display chip

       SureElec
              LCD devices from SURE electronics  (http://www.sureelectronics.net)

       svga   VGA monitors using svgalib

       t6963  Toshiba T6963 based LCD displays (text mode)

       text   Standard "hard-copy" text display

       tyan   LCD module in Tyan Barebone GS series

       ula200 ULA-200 device from ELV (http://www.elv.de)

       vlsys_m428
              VFD/IR combination in case MonCaso 320 from Moneual

       yard2  yard2 LCD module

       xosd   On Screen Display on X11

       Multiple  drivers  can be used simultaneously; thus, for example, a Matrix Orbital display
       (MtxOrb driver) can be combined with an infrared driver (irmanin driver).

INVOCATION

              LCDd -d MtxOrb -d joy
       The invocation example above will start LCDd reading its configuration  from  the  default
       configuration  file  /etc/LCDd.conf  but overriding the drivers specified therein with the
       Matrix Orbital driver and the Joystick input driver.

LCDPROC CLIENT-SERVER PROTOCOL

       There is a basic sequence:

       1. Open a TCP connection to the LCDd server port (usually 13666).

       2. Say "hello"

       3. The server will return some information on the type
              of display available.

       4. Define (and use) a new screen and its widgets.

       5. Close the socket when done displaying data.

   CLIENT COMMANDS
       There are many commands for the client to send to the LCDd server:

       hello  This starts a client-server session with the LCDd server; the server will return  a
              data string detailing the type of display and its size.

       client_set -name name
              Set the client's name.

       screen_add #id
              Add a new screen to the display.

       screen_del #id
              Remove a screen from the display.

       screen_set  #id  [-name name ] [-wid width] [-hgt height] [-priority prio] [-duration int]
       [-timeout int]  [-heartbeat  mode]  [-backlight  mode]  [-cursor  mode]  [-cursor_x  xpos]
       [-cursor_y ypos]
              Initialize a screen, or reset its data.

       widget_add #screen #id type [-in #frame]
              Add a widget of type type to screen #screen.

       widget_del #screen #id
              Delete widget #id from screen #screen.

       widget_set #screen #id data
              Set the data used to define a particular widget #id on screen #screen.

   HEARTBEAT MODES
       Valid heartbeat mode values (for the screen_set command) are:

       on     Display pulsing heart symbol.

       off    No heartbeat display.

       open   Use client's heartbeat setting. This is the default.

   BACKLIGHT MODES
       Valid backlight mode values (for the screen_set command) are:

       on     Turn backlight on.

       off    Turn backlight off

       toggle Turn backlight off when it is on and vice versa.

       open   Use client's backlight setting. This is the default.

       blink  Blinking backlight

       flash  Flashing blacklight

   Priorities
       Valid priority settings (used in the screen_set command) are as follows:

       input  The client is doing interactive input.

       alert  The screen has an important message for the user.

       foreground
              an active client

       info   Normal info screen, default priority.

       background
              The screen is only visible when no normal info screens exists.

       hidden The screen will never be visible.

       For  compatibility  with older versions of clients a mapping of numeric priority values is
       also supported:

       1 - 64 foreground

       65 - 192
              normal

       193 - (infinity)
              background

       An example of how to properly use priorities is as follows:

       Imagine you're making an mp3 player for lcdproc.  When the  song  changes,  it's  nice  to
       display the new name immediately.  So, you could set your screen's priority to foreground,
       wait for the server to display (or ignore) your  screen,  then  set  the  screen  back  to
       normal.   This  would  cause  the  mp3  screen to show up as soon as the one on screen was
       finished, then return to normal priority afterward.

       Or, let's say your client monitors the  health  of  hospital  patients.   If  one  of  the
       patients  has  a heart attack, you could set the screen priority to alert, and it would be
       displayed immediately.  It wouldn't even wait for the previous screen  to  finish.   Also,
       the display would stay on screen most of the time until the user did something about it.

   WIDGET TYPES
       Widgets can be any of the following:

       string A text string to display (as is).

       hbar   A horizontal bar graph.

       vbar   A vertical bar graph.

       title  A title displayed across the top of the display, within a banner.

       icon   A graphic icon.

       scroller
              A scrolling text display, scrolling either horizontally or vertically.

       frame  A container to contain other widgets, permitting them to be referred to as a single
              unit.  A widget is put inside a frame by using the -in  #id  parameter,  where  #id
              refers to the id of the frame.

       num    Displays a large decimal digit

       Widgets are drawn on the screen in the order they are created.

   SETTING WIDGET DATA
       In  the  widget_set command, the data argument depends on which widget is being set.  Each
       widget takes a particular set of arguments which defines its form and behavior:

       string x y text
              Displays text at position (x,y).

       title text
              Uses text as title to display.

       hbar x y length
              Displays a horizontal bar starting at position (x,y) that is length pixels wide.

       vbar x y length
              Displays a vertical bar starting at position (x,y) that is length pixels high.

       icon x y name
              Displays the icon name at position (x,y).

       scroller left top right bottom direction speed text
              The text defined will scroll in the direction  defined.   Valid  directions  are  h
              (horizontal), m (marquee) and v (vertical).  The speed defines how many "movements"
              (or changes) will  occur  per  frame.   A  positive  number  indicates  frames  per
              movement; a negative number indicates movements per frame.

       frame left top right bottom wid hgt dir speed
              Frames define a visible "box" on screen, from the (left, top) corner to the (right,
              bottom) corner.  The actual data may be bigger, and is defined as  wid  (width)  by
              hgt  (height);  if  it is bigger, then the frame will scroll in the direction (dir)
              and speed defined.

       num x int
              Displays large decimal digit int at the horizontal position x, which  is  a  normal
              character  x  coordinate  on  the display.  The special value 10 for int displays a
              colon.

BUGS

       If LCDd seems not to work as expected, try to run it  in  the  foreground  with  reporting
       level set to maximum and reporting to stderr.  This can be achieved without changes to the
       config file by using the command line:
              LCDd -f -r 5 -s 0

FILES

       /etc/LCDd.conf, LCDd's default configuration file

SEE ALSO

       lcdproc-config(5), lcdproc(1), lcdexec(1)

AUTHOR

       Many people have contributed to LCDd.  See the CREDITS file for more details.

       All questions should be sent to the lcdproc mailing  list.   The  mailing  list,  and  the
       newest version of LCDproc, should be available from here:

                 http://www.lcdproc.org/

LEGAL STUFF

       The  lcdproc  package is released as "WorksForMe-Ware".  In other words, it is free, kinda
       neat, and we don't guarantee that it will do anything in particular on any machine  except
       the ones it was developed on.

       It  is  technically released under the GNU GPL license (you should have received the file,
       "COPYING", with LCDproc) (also, look on http://www.fsf.org/ for more information), so  you
       can  distribute  and use it for free -- but you must make the source code freely available
       to anyone who wants it.

       For any sort of real legal information, read the GNU GPL  (GNU  General  Public  License).
       It's worth reading.