focal (9) IF_DEQUEUE.9freebsd.gz
NAME
ifnet, ifaddr, ifqueue, if_data — kernel interfaces for manipulating network interfaces
SYNOPSIS
#include <sys/param.h>
#include <sys/time.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_types.h>
Interface Manipulation Functions
struct ifnet *
if_alloc(u_char type);
void
if_attach(struct ifnet *ifp);
void
if_detach(struct ifnet *ifp);
void
if_free(struct ifnet *ifp);
void
if_free_type(struct ifnet *ifp, u_char type);
void
if_down(struct ifnet *ifp);
int
ifioctl(struct socket *so, u_long cmd, caddr_t data, struct thread *td);
int
ifpromisc(struct ifnet *ifp, int pswitch);
int
if_allmulti(struct ifnet *ifp, int amswitch);
struct ifnet *
ifunit(const char *name);
struct ifnet *
ifunit_ref(const char *name);
void
if_up(struct ifnet *ifp);
Interface Address Functions
struct ifaddr *
ifaddr_byindex(u_short idx);
struct ifaddr *
ifa_ifwithaddr(struct sockaddr *addr);
struct ifaddr *
ifa_ifwithdstaddr(struct sockaddr *addr, int fib);
struct ifaddr *
ifa_ifwithnet(struct sockaddr *addr, int ignore_ptp, int fib);
struct ifaddr *
ifaof_ifpforaddr(struct sockaddr *addr, struct ifnet *ifp);
void
ifa_ref(struct ifaddr *ifa);
void
ifa_free(struct ifaddr *ifa);
Interface Multicast Address Functions
int
if_addmulti(struct ifnet *ifp, struct sockaddr *sa, struct ifmultiaddr **ifmap);
int
if_delmulti(struct ifnet *ifp, struct sockaddr *sa);
struct ifmultiaddr *
if_findmulti(struct ifnet *ifp, struct sockaddr *sa);
Output queue macros
IF_DEQUEUE(struct ifqueue *ifq, struct mbuf *m);
struct ifnet Member Functions
void
(*if_input)(struct ifnet *ifp, struct mbuf *m);
int
(*if_output)(struct ifnet *ifp, struct mbuf *m, const struct sockaddr *dst, struct route *ro);
void
(*if_start)(struct ifnet *ifp);
int
(*if_transmit)(struct ifnet *ifp, struct mbuf *m);
void
(*if_qflush)(struct ifnet *ifp);
int
(*if_ioctl)(struct ifnet *ifp, u_long cmd, caddr_t data);
void
(*if_init)(void *if_softc);
int
(*if_resolvemulti)(struct ifnet *ifp, struct sockaddr **retsa, struct sockaddr *addr);
struct ifaddr member function
void
(*ifa_rtrequest)(int cmd, struct rtentry *rt, struct rt_addrinfo *info);
Global Variables
extern struct ifnethead ifnet;
extern int if_index;
extern int ifqmaxlen;
DATA STRUCTURES
The kernel mechanisms for handling network interfaces reside primarily in the ifnet, if_data, ifaddr, and
ifmultiaddr structures in <net/if.h> and <net/if_var.h> and the functions named above and defined in
/sys/net/if.c. Those interfaces which are intended to be used by user programs are defined in <net/if.h>;
these include the interface flags, the if_data structure, and the structures defining the appearance of
interface-related messages on the route(4) routing socket and in sysctl(3). The header file <net/if_var.h>
defines the kernel-internal interfaces, including the ifnet, ifaddr, and ifmultiaddr structures and the
functions which manipulate them. (A few user programs will need <net/if_var.h> because it is the
prerequisite of some other header file like <netinet/if_ether.h>. Most references to those two files in
particular can be replaced by <net/ethernet.h>.)
The system keeps a linked list of interfaces using the TAILQ macros defined in queue(3); this list is
headed by a struct ifnethead called ifnet. The elements of this list are of type struct ifnet, and most
kernel routines which manipulate interface as such accept or return pointers to these structures. Each
interface structure contains an if_data structure used for statistics and information. Each interface also
has a TAILQ of interface addresses, described by ifaddr structures. An AF_LINK address (see link_addr(3))
describing the link layer implemented by the interface (if any) is accessed by the ifaddr_byindex()
function or if_addr structure. (Some trivial interfaces do not provide any link layer addresses; this
structure, while still present, serves only to identify the interface name and index.)
Finally, those interfaces supporting reception of multicast datagrams have a TAILQ of multicast group
memberships, described by ifmultiaddr structures. These memberships are reference-counted.
Interfaces are also associated with an output queue, defined as a struct ifqueue; this structure is used to
hold packets while the interface is in the process of sending another.
The ifnet Structure
The fields of struct ifnet are as follows:
if_softc (void *) A pointer to the driver's private state block. (Initialized by driver.)
if_l2com (void *) A pointer to the common data for the interface's layer 2 protocol.
(Initialized by if_alloc().)
if_vnet (struct vnet *) A pointer to the virtual network stack instance. (Initialized by
if_attach().)
if_home_vnet (struct vnet *) A pointer to the parent virtual network stack, where this struct
ifnet originates from. (Initialized by if_attach().)
if_link (TAILQ_ENTRY(ifnet)) queue(3) macro glue.
if_xname (char *) The name of the interface, (e.g., “fxp0” or “lo0”). (Initialized by driver
(usually via if_initname()).)
if_dname (const char *) The name of the driver. (Initialized by driver (usually via
if_initname()).)
if_dunit (int) A unique number assigned to each interface managed by a particular driver.
Drivers may choose to set this to IF_DUNIT_NONE if a unit number is not associated
with the device. (Initialized by driver (usually via if_initname()).)
if_refcount (u_int) The reference count. (Initialized by if_alloc().)
if_addrhead (struct ifaddrhead) The head of the queue(3) TAILQ containing the list of addresses
assigned to this interface.
if_pcount (int) A count of promiscuous listeners on this interface, used to reference-count
the IFF_PROMISC flag.
if_carp (struct carp_if *) A pointer to the CARP interface structure, carp(4). (Initialized
by the driver-specific if_ioctl() routine.)
if_bpf (struct bpf_if *) Opaque per-interface data for the packet filter, bpf(4).
(Initialized by bpf_attach().)
if_index (u_short) A unique number assigned to each interface in sequence as it is attached.
This number can be used in a struct sockaddr_dl to refer to a particular interface
by index (see link_addr(3)). (Initialized by if_alloc().)
if_vlantrunk (struct ifvlantrunk *) A pointer to 802.1Q trunk structure, vlan(4). (Initialized
by the driver-specific if_ioctl() routine.)
if_flags (int) Flags describing operational parameters of this interface (see below).
(Manipulated by generic code.)
if_drv_flags (int) Flags describing operational status of this interface (see below).
(Manipulated by driver.)
if_capabilities (int) Flags describing the capabilities the interface supports (see below).
if_capenable (int) Flags describing the enabled capabilities of the interface (see below).
if_linkmib (void *) A pointer to an interface-specific MIB structure exported by ifmib(4).
(Initialized by driver.)
if_linkmiblen (size_t) The size of said structure. (Initialized by driver.)
if_data (struct if_data) More statistics and information; see The if_data structure, below.
(Initialized by driver, manipulated by both driver and generic code.)
if_multiaddrs (struct ifmultihead) The head of the queue(3) TAILQ containing the list of multicast
addresses assigned to this interface.
if_amcount (int) A number of multicast requests on this interface, used to reference-count the
IFF_ALLMULTI flag.
if_addr (struct ifaddr *) A pointer to the link-level interface address. (Initialized by
if_alloc().)
if_snd (struct ifaltq) The output queue. (Manipulated by driver.)
if_broadcastaddr
(const u_int8_t *) A link-level broadcast bytestring for protocols with variable
address length.
if_bridge (void *) A pointer to the bridge interface structure, if_bridge(4). (Initialized by
the driver-specific if_ioctl() routine.)
if_label (struct label *) A pointer to the MAC Framework label structure, mac(4).
(Initialized by if_alloc().)
if_afdata (void *) An address family dependent data region.
if_afdata_initialized
(int) Used to track the current state of address family initialization.
if_afdata_lock (struct rwlock) An rwlock(9) lock used to protect if_afdata internals.
if_linktask (struct task) A taskqueue(9) task scheduled for link state change events of the
interface.
if_addr_lock (struct rwlock) An rwlock(9) lock used to protect interface-related address lists.
if_clones (LIST_ENTRY(ifnet)) queue(3) macro glue for the list of clonable network interfaces.
if_groups (TAILQ_HEAD(, ifg_list)) The head of the queue(3) TAILQ containing the list of
groups per interface.
if_pf_kif (void *) A pointer to the structure used for interface abstraction by pf(4).
if_lagg (void *) A pointer to the lagg(4) interface structure.
if_alloctype (u_char) The type of the interface as it was at the time of its allocation. It is
used to cache the type passed to if_alloc(), but unlike if_type, it would not be
changed by drivers.
References to ifnet structures are gained by calling the if_ref() function and released by calling the
if_rele() function. They are used to allow kernel code walking global interface lists to release the ifnet
lock yet keep the ifnet structure stable.
There are in addition a number of function pointers which the driver must initialize to complete its
interface with the generic interface layer:
if_input()
Pass a packet to an appropriate upper layer as determined from the link-layer header of the packet.
This routine is to be called from an interrupt handler or used to emulate reception of a packet on
this interface. A single function implementing if_input() can be shared among multiple drivers
utilizing the same link-layer framing, e.g., Ethernet.
if_output()
Output a packet on interface ifp, or queue it on the output queue if the interface is already active.
if_transmit()
Transmit a packet on an interface or queue it if the interface is in use. This function will return
ENOBUFS if the devices software and hardware queues are both full. This function must be installed
after if_attach() to override the default implementation. This function is exposed in order to allow
drivers to manage their own queues and to reduce the latency caused by a frequently gratuitous
enqueue / dequeue pair to ifq. The suggested internal software queuing mechanism is buf_ring.
if_qflush()
Free mbufs in internally managed queues when the interface is marked down. This function must be
installed after if_attach() to override the default implementation. This function is exposed in
order to allow drivers to manage their own queues and to reduce the latency caused by a frequently
gratuitous enqueue / dequeue pair to ifq. The suggested internal software queuing mechanism is
buf_ring.
if_start()
Start queued output on an interface. This function is exposed in order to provide for some interface
classes to share a if_output() among all drivers. if_start() may only be called when the
IFF_DRV_OACTIVE flag is not set. (Thus, IFF_DRV_OACTIVE does not literally mean that output is
active, but rather that the device's internal output queue is full.) Please note that this function
will soon be deprecated.
if_ioctl()
Process interface-related ioctl(2) requests (defined in <sys/sockio.h>). Preliminary processing is
done by the generic routine ifioctl() to check for appropriate privileges, locate the interface being
manipulated, and perform certain generic operations like twiddling flags and flushing queues. See
the description of ifioctl() below for more information.
if_init()
Initialize and bring up the hardware, e.g., reset the chip and enable the receiver unit. Should mark
the interface running, but not active (IFF_DRV_RUNNING, ~IIF_DRV_OACTIVE).
if_resolvemulti()
Check the requested multicast group membership, addr, for validity, and if necessary compute a link-
layer group which corresponds to that address which is returned in *retsa. Returns zero on success,
or an error code on failure.
Interface Flags
Interface flags are used for a number of different purposes. Some flags simply indicate information about
the type of interface and its capabilities; others are dynamically manipulated to reflect the current state
of the interface. Flags of the former kind are marked ⟨S⟩ in this table; the latter are marked ⟨D⟩. Flags
which begin with “IFF_DRV_” are stored in if_drv_flags; all other flags are stored in if_flags.
The macro IFF_CANTCHANGE defines the bits which cannot be set by a user program using the SIOCSIFFLAGS
command to ioctl(2); these are indicated by an asterisk (‘*’) in the following listing.
IFF_UP ⟨D⟩ The interface has been configured up by the user-level code.
IFF_BROADCAST ⟨S*⟩ The interface supports broadcast.
IFF_DEBUG ⟨D⟩ Used to enable/disable driver debugging code.
IFF_LOOPBACK ⟨S⟩ The interface is a loopback device.
IFF_POINTOPOINT ⟨S*⟩ The interface is point-to-point; “broadcast” address is actually the address of
the other end.
IFF_DRV_RUNNING ⟨D*⟩ The interface has been configured and dynamic resources were successfully
allocated. Probably only useful internal to the interface.
IFF_NOARP ⟨D⟩ Disable network address resolution on this interface.
IFF_PROMISC ⟨D*⟩ This interface is in promiscuous mode.
IFF_PPROMISC ⟨D⟩ This interface is in the permanently promiscuous mode (implies IFF_PROMISC).
IFF_ALLMULTI ⟨D*⟩ This interface is in all-multicasts mode (used by multicast routers).
IFF_DRV_OACTIVE ⟨D*⟩ The interface's hardware output queue (if any) is full; output packets are to
be queued.
IFF_SIMPLEX ⟨S*⟩ The interface cannot hear its own transmissions.
IFF_LINK0
IFF_LINK1
IFF_LINK2 ⟨D⟩ Control flags for the link layer. (Currently abused to select among multiple
physical layers on some devices.)
IFF_MULTICAST ⟨S*⟩ This interface supports multicast.
IFF_CANTCONFIG ⟨S*⟩ The interface is not configurable in a meaningful way. Primarily useful for
IFT_USB interfaces registered at the interface list.
IFF_MONITOR ⟨D⟩ This interface blocks transmission of packets and discards incoming packets
after BPF processing. Used to monitor network traffic but not interact with the
network in question.
IFF_STATICARP ⟨D⟩ Used to enable/disable ARP requests on this interface.
IFF_DYING ⟨D*⟩ Set when the ifnet structure of this interface is being released and still has
if_refcount references.
IFF_RENAMING ⟨D⟩ Set when this interface is being renamed.
Interface Capabilities Flags
Interface capabilities are specialized features an interface may or may not support. These capabilities
are very hardware-specific and allow, when enabled, to offload specific network processing to the interface
or to offer a particular feature for use by other kernel parts.
It should be stressed that a capability can be completely uncontrolled (i.e., stay always enabled with no
way to disable it) or allow limited control over itself (e.g., depend on another capability's state.) Such
peculiarities are determined solely by the hardware and driver of a particular interface. Only the driver
possesses the knowledge on whether and how the interface capabilities can be controlled. Consequently,
capabilities flags in if_capenable should never be modified directly by kernel code other than the
interface driver. The command SIOCSIFCAP to ifioctl() is the dedicated means to attempt altering
if_capenable on an interface. Userland code shall use ioctl(2).
The following capabilities are currently supported by the system:
IFCAP_RXCSUM This interface can do checksum validation on receiving data. Some interfaces
do not have sufficient buffer storage to store frames above a certain MTU-size
completely. The driver for the interface might disable hardware checksum
validation if the MTU is set above the hardcoded limit.
IFCAP_TXCSUM This interface can do checksum calculation on transmitting data.
IFCAP_HWCSUM A shorthand for (IFCAP_RXCSUM | IFCAP_TXCSUM).
IFCAP_NETCONS This interface can be a network console.
IFCAP_VLAN_MTU The vlan(4) driver can operate over this interface in software tagging mode
without having to decrease MTU on vlan(4) interfaces below 1500 bytes. This
implies the ability of this interface to cope with frames somewhat longer than
permitted by the Ethernet specification.
IFCAP_VLAN_HWTAGGING This interface can do VLAN tagging on output and demultiplex frames by their
VLAN tag on input.
IFCAP_JUMBO_MTU This Ethernet interface can transmit and receive frames up to 9000 bytes long.
IFCAP_POLLING This interface supports polling(4). See below for details.
IFCAP_VLAN_HWCSUM This interface can do checksum calculation on both transmitting and receiving
data on vlan(4) interfaces (implies IFCAP_HWCSUM).
IFCAP_TSO4 This Ethernet interface supports TCP4 Segmentation offloading.
IFCAP_TSO6 This Ethernet interface supports TCP6 Segmentation offloading.
IFCAP_TSO A shorthand for (IFCAP_TSO4 | IFCAP_TSO6).
IFCAP_TOE4 This Ethernet interface supports TCP offloading.
IFCAP_TOE6 This Ethernet interface supports TCP6 offloading.
IFCAP_TOE A shorthand for (IFCAP_TOE4 | IFCAP_TOE6).
IFCAP_WOL_UCAST This Ethernet interface supports waking up on any Unicast packet.
IFCAP_WOL_MCAST This Ethernet interface supports waking up on any Multicast packet.
IFCAP_WOL_MAGIC This Ethernet interface supports waking up on any Magic packet such as those
sent by wake(8).
IFCAP_WOL A shorthand for (IFCAP_WOL_UCAST | IFCAP_WOL_MCAST | IFCAP_WOL_MAGIC).
IFCAP_TOE4 This Ethernet interface supports TCP4 Offload Engine.
IFCAP_TOE6 This Ethernet interface supports TCP6 Offload Engine.
IFCAP_TOE A shorthand for (IFCAP_TOE4 | IFCAP_TOE6).
IFCAP_VLAN_HWFILTER This interface supports frame filtering in hardware on vlan(4) interfaces.
IFCAP_VLAN_HWTSO This interface supports TCP Segmentation offloading on vlan(4) interfaces
(implies IFCAP_TSO).
IFCAP_LINKSTATE This Ethernet interface supports dynamic link state changes.
The ability of advanced network interfaces to offload certain computational tasks from the host CPU to the
board is limited mostly to TCP/IP. Therefore a separate field associated with an interface (see
ifnet.if_data.ifi_hwassist below) keeps a detailed description of its enabled capabilities specific to
TCP/IP processing. The TCP/IP module consults the field to see which tasks can be done on an outgoing
packet by the interface. The flags defined for that field are a superset of those for
mbuf.m_pkthdr.csum_flags, namely:
CSUM_IP The interface will compute IP checksums.
CSUM_TCP The interface will compute TCP checksums.
CSUM_UDP The interface will compute UDP checksums.
An interface notifies the TCP/IP module about the tasks the former has performed on an incoming packet by
setting the corresponding flags in the field mbuf.m_pkthdr.csum_flags of the mbuf chain containing the
packet. See mbuf(9) for details.
The capability of a network interface to operate in polling(4) mode involves several flags in different
global variables and per-interface fields. The capability flag IFCAP_POLLING set in interface's
if_capabilities indicates support for polling(4) on the particular interface. If set in if_capabilities,
the same flag can be marked or cleared in the interface's if_capenable within ifioctl(), thus initiating
switch of the interface to polling(4) mode or interrupt mode, respectively. The actual mode change is
managed by the driver-specific if_ioctl() routine. The polling(4) handler returns the number of packets
processed.
The if_data Structure
The if_data structure contains statistics and identifying information used by management programs, and
which is exported to user programs by way of the ifmib(4) branch of the sysctl(3) MIB. The following
elements of the if_data structure are initialized by the interface and are not expected to change
significantly over the course of normal operation:
ifi_type (u_char) The type of the interface, as defined in <net/if_types.h> and described
below in the Interface Types section.
ifi_physical (u_char) Intended to represent a selection of physical layers on devices which
support more than one; never implemented.
ifi_addrlen (u_char) Length of a link-layer address on this device, or zero if there are none.
Used to initialized the address length field in sockaddr_dl structures referring to
this interface.
ifi_hdrlen (u_char) Maximum length of any link-layer header which might be prepended by the
driver to a packet before transmission. The generic code computes the maximum over
all interfaces and uses that value to influence the placement of data in mbufs to
attempt to ensure that there is always sufficient space to prepend a link-layer
header without allocating an additional mbuf.
ifi_datalen (u_char) Length of the if_data structure. Allows some stabilization of the routing
socket ABI in the face of increases in the length of struct ifdata.
ifi_mtu (u_long) The maximum transmission unit of the medium, exclusive of any link-layer
overhead.
ifi_metric (u_long) A dimensionless metric interpreted by a user-mode routing process.
ifi_baudrate (u_long) The line rate of the interface, in bits per second.
ifi_hwassist (u_long) A detailed interpretation of the capabilities to offload computational tasks
for outgoing packets. The interface driver must keep this field in accord with the
current value of if_capenable.
ifi_epoch (time_t) The system uptime when interface was attached or the statistics below were
reset. This is intended to be used to set the SNMP variable
ifCounterDiscontinuityTime. It may also be used to determine if two successive
queries for an interface of the same index have returned results for the same
interface.
The structure additionally contains generic statistics applicable to a variety of different interface types
(except as noted, all members are of type u_long):
ifi_link_state (u_char) The current link state of Ethernet interfaces. See the Interface Link
States section for possible values.
ifi_ipackets Number of packets received.
ifi_ierrors Number of receive errors detected (e.g., FCS errors, DMA overruns, etc.). More
detailed breakdowns can often be had by way of a link-specific MIB.
ifi_opackets Number of packets transmitted.
ifi_oerrors Number of output errors detected (e.g., late collisions, DMA overruns, etc.). More
detailed breakdowns can often be had by way of a link-specific MIB.
ifi_collisions Total number of collisions detected on output for CSMA interfaces. (This member is
sometimes [ab]used by other types of interfaces for other output error counts.)
ifi_ibytes Total traffic received, in bytes.
ifi_obytes Total traffic transmitted, in bytes.
ifi_imcasts Number of packets received which were sent by link-layer multicast.
ifi_omcasts Number of packets sent by link-layer multicast.
ifi_iqdrops Number of packets dropped on input. Rarely implemented.
ifi_oqdrops Number of packets dropped on output.
ifi_noproto Number of packets received for unknown network-layer protocol.
ifi_lastchange (struct timeval) The time of the last administrative change to the interface (as
required for SNMP).
Interface Types
The header file <net/if_types.h> defines symbolic constants for a number of different types of interfaces.
The most common are:
IFT_OTHER none of the following
IFT_ETHER Ethernet
IFT_ISO88023 ISO 8802-3 CSMA/CD
IFT_ISO88024 ISO 8802-4 Token Bus
IFT_ISO88025 ISO 8802-5 Token Ring
IFT_ISO88026 ISO 8802-6 DQDB MAN
IFT_FDDI FDDI
IFT_PPP Internet Point-to-Point Protocol (ppp(8))
IFT_LOOP The loopback (lo(4)) interface
IFT_SLIP Serial Line IP
IFT_PARA Parallel-port IP (“PLIP”)
IFT_ATM Asynchronous Transfer Mode
IFT_USB USB Interface
Interface Link States
The following link states are currently defined:
LINK_STATE_UNKNOWN The link is in an invalid or unknown state.
LINK_STATE_DOWN The link is down.
LINK_STATE_UP The link is up.
The ifaddr Structure
Every interface is associated with a list (or, rather, a TAILQ) of addresses, rooted at the interface
structure's if_addrhead member. The first element in this list is always an AF_LINK address representing
the interface itself; multi-access network drivers should complete this structure by filling in their link-
layer addresses after calling if_attach(). Other members of the structure represent network-layer
addresses which have been configured by means of the SIOCAIFADDR command to ioctl(2), called on a socket of
the appropriate protocol family. The elements of this list consist of ifaddr structures. Most protocols
will declare their own protocol-specific interface address structures, but all begin with a struct ifaddr
which provides the most-commonly-needed functionality across all protocols. Interface addresses are
reference-counted.
The members of struct ifaddr are as follows:
ifa_addr (struct sockaddr *) The local address of the interface.
ifa_dstaddr (struct sockaddr *) The remote address of point-to-point interfaces, and the broadcast
address of broadcast interfaces. (ifa_broadaddr is a macro for ifa_dstaddr.)
ifa_netmask (struct sockaddr *) The network mask for multi-access interfaces, and the confusion
generator for point-to-point interfaces.
ifa_ifp (struct ifnet *) A link back to the interface structure.
ifa_link (TAILQ_ENTRY(ifaddr)) queue(3) glue for list of addresses on each interface.
ifa_rtrequest See below.
ifa_flags (u_short) Some of the flags which would be used for a route representing this address
in the route table.
ifa_refcnt (short) The reference count.
References to ifaddr structures are gained by calling the ifa_ref() function and released by calling the
ifa_free() function.
ifa_rtrequest() is a pointer to a function which receives callouts from the routing code (rtrequest()) to
perform link-layer-specific actions upon requests to add, or delete routes. The cmd argument indicates the
request in question: RTM_ADD, or RTM_DELETE. The rt argument is the route in question; the info argument
contains the specific destination being manipulated.
FUNCTIONS
The functions provided by the generic interface code can be divided into two groups: those which manipulate
interfaces, and those which manipulate interface addresses. In addition to these functions, there may also
be link-layer support routines which are used by a number of drivers implementing a specific link layer
over different hardware; see the documentation for that link layer for more details.
The ifmultiaddr Structure
Every multicast-capable interface is associated with a list of multicast group memberships, which indicate
at a low level which link-layer multicast addresses (if any) should be accepted, and at a high level, in
which network-layer multicast groups a user process has expressed interest.
The elements of the structure are as follows:
ifma_link (LIST_ENTRY(ifmultiaddr)) queue(3) macro glue.
ifma_addr (struct sockaddr *) A pointer to the address which this record represents. The
memberships for various address families are stored in arbitrary order.
ifma_lladdr (struct sockaddr *) A pointer to the link-layer multicast address, if any, to which
the network-layer multicast address in ifma_addr is mapped, else a null pointer. If
this element is non-nil, this membership also holds an invisible reference to another
membership for that link-layer address.
ifma_refcount (u_int) A reference count of requests for this particular membership.
Interface Manipulation Functions
if_alloc()
Allocate and initialize struct ifnet. Initialization includes the allocation of an interface index
and may include the allocation of a type specific structure in if_l2com.
if_attach()
Link the specified interface ifp into the list of network interfaces. Also initialize the list of
addresses on that interface, and create a link-layer ifaddr structure to be the first element in that
list. (A pointer to this address structure is saved in the ifnet structure and is accessed by the
ifaddr_byindex() function.) The ifp must have been allocated by if_alloc().
if_detach()
Shut down and unlink the specified ifp from the interface list.
if_free()
Free the given ifp back to the system. The interface must have been previously detached if it was
ever attached.
if_free_type()
Identical to if_free() except that the given type is used to free if_l2com instead of the type in
if_type. This is intended for use with drivers that change their interface type.
if_down()
Mark the interface ifp as down (i.e., IFF_UP is not set), flush its output queue, notify protocols of
the transition, and generate a message from the route(4) routing socket.
if_up()
Mark the interface ifp as up, notify protocols of the transition, and generate a message from the
route(4) routing socket.
ifpromisc()
Add or remove a promiscuous reference to ifp. If pswitch is true, add a reference; if it is false,
remove a reference. On reference count transitions from zero to one and one to zero, set the
IFF_PROMISC flag appropriately and call if_ioctl() to set up the interface in the desired mode.
if_allmulti()
As ifpromisc(), but for the all-multicasts (IFF_ALLMULTI) flag instead of the promiscuous flag.
ifunit()
Return an ifnet pointer for the interface named name.
ifunit_ref()
Return a reference-counted (via ifa_ref()) ifnet pointer for the interface named name. This is the
preferred function over ifunit(). The caller is responsible for releasing the reference with
if_rele() when it is finished with the ifnet.
ifioctl()
Process the ioctl request cmd, issued on socket so by thread td, with data parameter data. This is
the main routine for handling all interface configuration requests from user mode. It is ordinarily
only called from the socket-layer ioctl(2) handler, and only for commands with class ‘i’. Any
unrecognized commands will be passed down to socket so's protocol for further interpretation. The
following commands are handled by ifioctl():
SIOCGIFCONF Get interface configuration. (No call-down to driver.)
SIOCSIFNAME Set the interface name. RTM_IFANNOUNCE departure and arrival messages are sent
so that routing code that relies on the interface name will update its
interface list. Caller must have appropriate privilege. (No call-down to
driver.)
SIOCGIFCAP
SIOCGIFFIB
SIOCGIFFLAGS
SIOCGIFMETRIC
SIOCGIFMTU
SIOCGIFPHYS Get interface capabilities, FIB, flags, metric, MTU, medium selection. (No
call-down to driver.)
SIOCSIFCAP Enable or disable interface capabilities. Caller must have appropriate
privilege. Before a call to the driver-specific if_ioctl() routine, the
requested mask for enabled capabilities is checked against the mask of
capabilities supported by the interface, if_capabilities. Requesting to enable
an unsupported capability is invalid. The rest is supposed to be done by the
driver, which includes updating if_capenable and if_data.ifi_hwassist
appropriately.
SIOCSIFFIB Sets interface FIB. Caller must have appropriate privilege. FIB values start
at 0 and values greater or equals than net.fibs are considered invalid.
SIOCSIFFLAGS Change interface flags. Caller must have appropriate privilege. If a change
to the IFF_UP flag is requested, if_up() or if_down() is called as appropriate.
Flags listed in IFF_CANTCHANGE are masked off, and the field if_flags in the
interface structure is updated. Finally, the driver if_ioctl() routine is
called to perform any setup requested.
SIOCSIFMETRIC
SIOCSIFPHYS Change interface metric or medium. Caller must have appropriate privilege.
SIOCSIFMTU Change interface MTU. Caller must have appropriate privilege. MTU values less
than 72 or greater than 65535 are considered invalid. The driver if_ioctl()
routine is called to implement the change; it is responsible for any additional
sanity checking and for actually modifying the MTU in the interface structure.
SIOCADDMULTI
SIOCDELMULTI Add or delete permanent multicast group memberships on the interface. Caller
must have appropriate privilege. The if_addmulti() or if_delmulti() function
is called to perform the operation; qq.v.
SIOCAIFADDR
SIOCDIFADDR The socket's protocol control routine is called to implement the requested
action.
if_down(), ifioctl(), ifpromisc(), and if_up() must be called at splnet() or higher.
Interface Address Functions
Several functions exist to look up an interface address structure given an address. ifa_ifwithaddr()
returns an interface address with either a local address or a broadcast address precisely matching the
parameter addr. ifa_ifwithdstaddr() returns an interface address for a point-to-point interface whose
remote (“destination”) address is addr and a fib is fib. If fib is RT_ALL_FIBS, then the first interface
address matching addr will be returned.
ifa_ifwithnet() returns the most specific interface address which matches the specified address, addr,
subject to its configured netmask, or a point-to-point interface address whose remote address is addr if
one is found. If ignore_ptp is true, skip point-to-point interface addresses. The fib parameter is
handled the same way as by ifa_ifwithdstaddr().
ifaof_ifpforaddr() returns the most specific address configured on interface ifp which matches address
addr, subject to its configured netmask. If the interface is point-to-point, only an interface address
whose remote address is precisely addr will be returned.
ifaddr_byindex() returns the link-level address of the interface with the given index idx.
All of these functions return a null pointer if no such address can be found.
Interface Multicast Address Functions
The if_addmulti(), if_delmulti(), and if_findmulti() functions provide support for requesting and
relinquishing multicast group memberships, and for querying an interface's membership list, respectively.
The if_addmulti() function takes a pointer to an interface, ifp, and a generic address, sa. It also takes
a pointer to a struct ifmultiaddr * which is filled in on successful return with the address of the group
membership control block. The if_addmulti() function performs the following four-step process:
1. Call the interface's if_resolvemulti() entry point to determine the link-layer address, if any,
corresponding to this membership request, and also to give the link layer an opportunity to veto
this membership request should it so desire.
2. Check the interface's group membership list for a pre-existing membership for this group. If
one is not found, allocate a new one; if one is, increment its reference count.
3. If the if_resolvemulti() routine returned a link-layer address corresponding to the group,
repeat the previous step for that address as well.
4. If the interface's multicast address filter needs to be changed because a new membership was
added, call the interface's if_ioctl() routine (with a cmd argument of SIOCADDMULTI) to request
that it do so.
The if_delmulti() function, given an interface ifp and an address, sa, reverses this process. Both
functions return zero on success, or a standard error number on failure.
The if_findmulti() function examines the membership list of interface ifp for an address matching sa, and
returns a pointer to that struct ifmultiaddr if one is found, else it returns a null pointer.
SEE ALSO
ioctl(2), link_addr(3), queue(3), sysctl(3), bpf(4), ifmib(4), lo(4), netintro(4), polling(4), config(8), ppp(8), mbuf(9), rtentry(9) Gary R. Wright and W. Richard Stevens, TCP/IP Illustrated, Vol. 2, Addison-Wesley, ISBN 0-201-63354-X.
AUTHORS
This manual page was written by Garrett A. Wollman.