Provided by: freebsd-manpages_12.2-1_all 
NAME
kqueue, kevent — kernel event notification mechanism
LIBRARY
Standard C Library (libc, -lc)
SYNOPSIS
#include <sys/event.h>
int
kqueue(void);
int
kevent(int kq, const struct kevent *changelist, int nchanges, struct kevent *eventlist, int nevents,
const struct timespec *timeout);
EV_SET(kev, ident, filter, flags, fflags, data, udata);
DESCRIPTION
The kqueue() system call provides a generic method of notifying the user when an event happens or a
condition holds, based on the results of small pieces of kernel code termed filters. A kevent is
identified by the (ident, filter) pair; there may only be one unique kevent per kqueue.
The filter is executed upon the initial registration of a kevent in order to detect whether a preexisting
condition is present, and is also executed whenever an event is passed to the filter for evaluation. If
the filter determines that the condition should be reported, then the kevent is placed on the kqueue for
the user to retrieve.
The filter is also run when the user attempts to retrieve the kevent from the kqueue. If the filter
indicates that the condition that triggered the event no longer holds, the kevent is removed from the
kqueue and is not returned.
Multiple events which trigger the filter do not result in multiple kevents being placed on the kqueue;
instead, the filter will aggregate the events into a single struct kevent. Calling close() on a file
descriptor will remove any kevents that reference the descriptor.
The kqueue() system call creates a new kernel event queue and returns a descriptor. The queue is not
inherited by a child created with fork(2). However, if rfork(2) is called without the RFFDG flag, then the
descriptor table is shared, which will allow sharing of the kqueue between two processes.
The kevent() system call is used to register events with the queue, and return any pending events to the
user. The changelist argument is a pointer to an array of kevent structures, as defined in <sys/event.h>.
All changes contained in the changelist are applied before any pending events are read from the queue. The
nchanges argument gives the size of changelist. The eventlist argument is a pointer to an array of kevent
structures. The nevents argument determines the size of eventlist. When nevents is zero, kevent() will
return immediately even if there is a timeout specified unlike select(2). If timeout is a non-NULL
pointer, it specifies a maximum interval to wait for an event, which will be interpreted as a struct
timespec. If timeout is a NULL pointer, kevent() waits indefinitely. To effect a poll, the timeout
argument should be non-NULL, pointing to a zero-valued timespec structure. The same array may be used for
the changelist and eventlist.
The EV_SET() macro is provided for ease of initializing a kevent structure.
The kevent structure is defined as:
struct kevent {
uintptr_t ident; /* identifier for this event */
short filter; /* filter for event */
u_short flags; /* action flags for kqueue */
u_int fflags; /* filter flag value */
int64_t data; /* filter data value */
void *udata; /* opaque user data identifier */
uint64_t ext[4]; /* extensions */
};
The fields of struct kevent are:
ident Value used to identify this event. The exact interpretation is determined by the attached
filter, but often is a file descriptor.
filter Identifies the kernel filter used to process this event. The pre-defined system filters are
described below.
flags Actions to perform on the event.
fflags Filter-specific flags.
data Filter-specific data value.
udata Opaque user-defined value passed through the kernel unchanged.
ext Extended data passed to and from kernel. The ext[0] and ext[1] members use is defined by the
filter. If the filter does not use them, the members are copied unchanged. The ext[2] and
ext[3] members are always passed through the kernel as-is, making additional context available
to application.
The flags field can contain the following values:
EV_ADD Adds the event to the kqueue. Re-adding an existing event will modify the parameters of the
original event, and not result in a duplicate entry. Adding an event automatically enables
it, unless overridden by the EV_DISABLE flag.
EV_ENABLE Permit kevent() to return the event if it is triggered.
EV_DISABLE Disable the event so kevent() will not return it. The filter itself is not disabled.
EV_DISPATCH Disable the event source immediately after delivery of an event. See EV_DISABLE above.
EV_DELETE Removes the event from the kqueue. Events which are attached to file descriptors are
automatically deleted on the last close of the descriptor.
EV_RECEIPT This flag is useful for making bulk changes to a kqueue without draining any pending events.
When passed as input, it forces EV_ERROR to always be returned. When a filter is successfully
added the data field will be zero. Note that if this flag is encountered and there is no
remaining space in eventlist to hold the EV_ERROR event, then subsequent changes will not get
processed.
EV_ONESHOT Causes the event to return only the first occurrence of the filter being triggered. After the
user retrieves the event from the kqueue, it is deleted.
EV_CLEAR After the event is retrieved by the user, its state is reset. This is useful for filters
which report state transitions instead of the current state. Note that some filters may
automatically set this flag internally.
EV_EOF Filters may set this flag to indicate filter-specific EOF condition.
EV_ERROR See RETURN VALUES below.
The predefined system filters are listed below. Arguments may be passed to and from the filter via the
fflags and data fields in the kevent structure.
EVFILT_READ Takes a descriptor as the identifier, and returns whenever there is data available to
read. The behavior of the filter is slightly different depending on the descriptor
type.
Sockets
Sockets which have previously been passed to listen() return when there is an
incoming connection pending. data contains the size of the listen backlog.
Other socket descriptors return when there is data to be read, subject to the
SO_RCVLOWAT value of the socket buffer. This may be overridden with a per-filter
low water mark at the time the filter is added by setting the NOTE_LOWAT flag in
fflags, and specifying the new low water mark in data. On return, data contains
the number of bytes of protocol data available to read.
If the read direction of the socket has shutdown, then the filter also sets EV_EOF
in flags, and returns the socket error (if any) in fflags. It is possible for EOF
to be returned (indicating the connection is gone) while there is still data
pending in the socket buffer.
Vnodes
Returns when the file pointer is not at the end of file. data contains the offset
from current position to end of file, and may be negative.
This behavior is different from poll(2), where read events are triggered for
regular files unconditionally. This event can be triggered unconditionally by
setting the NOTE_FILE_POLL flag in fflags.
Fifos, Pipes
Returns when the there is data to read; data contains the number of bytes
available.
When the last writer disconnects, the filter will set EV_EOF in flags. This will
be cleared by the filter when a new writer connects, at which point the filter will
resume waiting for data to become available before returning.
BPF devices
Returns when the BPF buffer is full, the BPF timeout has expired, or when the BPF
has “immediate mode” enabled and there is any data to read; data contains the
number of bytes available.
EVFILT_WRITE Takes a descriptor as the identifier, and returns whenever it is possible to write to
the descriptor. For sockets, pipes and fifos, data will contain the amount of space
remaining in the write buffer. The filter will set EV_EOF when the reader disconnects,
and for the fifo case, this will be cleared when a new reader connects. Note that this
filter is not supported for vnodes or BPF devices.
For sockets, the low water mark and socket error handling is identical to the
EVFILT_READ case.
EVFILT_EMPTY Takes a descriptor as the identifier, and returns whenever there is no remaining data
in the write buffer.
EVFILT_AIO Events for this filter are not registered with kevent() directly but are registered via
the aio_sigevent member of an asynchronous I/O request when it is scheduled via an
asynchronous I/O system call such as aio_read(). The filter returns under the same
conditions as aio_error(). For more details on this filter see sigevent(3) and aio(4).
EVFILT_VNODE Takes a file descriptor as the identifier and the events to watch for in fflags, and
returns when one or more of the requested events occurs on the descriptor. The events
to monitor are:
NOTE_ATTRIB The file referenced by the descriptor had its attributes changed.
NOTE_CLOSE A file descriptor referencing the monitored file, was closed. The
closed file descriptor did not have write access.
NOTE_CLOSE_WRITE A file descriptor referencing the monitored file, was closed. The
closed file descriptor had write access.
This note, as well as NOTE_CLOSE, are not activated when files are
closed forcibly by unmount(2) or revoke(2). Instead, NOTE_REVOKE
is sent for such events.
NOTE_DELETE The unlink() system call was called on the file referenced by the
descriptor.
NOTE_EXTEND For regular file, the file referenced by the descriptor was
extended.
For directory, reports that a directory entry was added or
removed, as the result of rename operation. The NOTE_EXTEND event
is not reported when a name is changed inside the directory.
NOTE_LINK The link count on the file changed. In particular, the NOTE_LINK
event is reported if a subdirectory was created or deleted inside
the directory referenced by the descriptor.
NOTE_OPEN The file referenced by the descriptor was opened.
NOTE_READ A read occurred on the file referenced by the descriptor.
NOTE_RENAME The file referenced by the descriptor was renamed.
NOTE_REVOKE Access to the file was revoked via revoke(2) or the underlying
file system was unmounted.
NOTE_WRITE A write occurred on the file referenced by the descriptor.
On return, fflags contains the events which triggered the filter.
EVFILT_PROC Takes the process ID to monitor as the identifier and the events to watch for in
fflags, and returns when the process performs one or more of the requested events. If
a process can normally see another process, it can attach an event to it. The events
to monitor are:
NOTE_EXIT The process has exited. The exit status will be stored in data.
NOTE_FORK The process has called fork().
NOTE_EXEC The process has executed a new process via execve(2) or a similar
call.
NOTE_TRACK Follow a process across fork() calls. The parent process registers a
new kevent to monitor the child process using the same fflags as the
original event. The child process will signal an event with
NOTE_CHILD set in fflags and the parent PID in data.
If the parent process fails to register a new kevent (usually due to
resource limitations), it will signal an event with NOTE_TRACKERR set
in fflags, and the child process will not signal a NOTE_CHILD event.
On return, fflags contains the events which triggered the filter.
EVFILT_PROCDESC Takes the process descriptor created by pdfork(2) to monitor as the identifier and the
events to watch for in fflags, and returns when the associated process performs one or
more of the requested events. The events to monitor are:
NOTE_EXIT The process has exited. The exit status will be stored in data.
On return, fflags contains the events which triggered the filter.
EVFILT_SIGNAL Takes the signal number to monitor as the identifier and returns when the given signal
is delivered to the process. This coexists with the signal() and sigaction()
facilities, and has a lower precedence. The filter will record all attempts to deliver
a signal to a process, even if the signal has been marked as SIG_IGN, except for the
SIGCHLD signal, which, if ignored, will not be recorded by the filter. Event
notification happens after normal signal delivery processing. data returns the number
of times the signal has occurred since the last call to kevent(). This filter
automatically sets the EV_CLEAR flag internally.
EVFILT_TIMER Establishes an arbitrary timer identified by ident. When adding a timer, data
specifies the moment to fire the timer (for NOTE_ABSTIME) or the timeout period. The
timer will be periodic unless EV_ONESHOT or NOTE_ABSTIME is specified. On return, data
contains the number of times the timeout has expired since the last call to kevent().
For non-monotonic timers, this filter automatically sets the EV_CLEAR flag internally.
The filter accepts the following flags in the fflags argument:
NOTE_SECONDS data is in seconds.
NOTE_MSECONDS data is in milliseconds.
NOTE_USECONDS data is in microseconds.
NOTE_NSECONDS data is in nanoseconds.
NOTE_ABSTIME The specified expiration time is absolute.
If fflags is not set, the default is milliseconds. On return, fflags contains the
events which triggered the filter.
If an existing timer is re-added, the existing timer will be effectively canceled
(throwing away any undelivered record of previous timer expiration) and re-started
using the new parameters contained in data and fflags.
There is a system wide limit on the number of timers which is controlled by the
kern.kq_calloutmax sysctl.
EVFILT_USER Establishes a user event identified by ident which is not associated with any kernel
mechanism but is triggered by user level code. The lower 24 bits of the fflags may be
used for user defined flags and manipulated using the following:
NOTE_FFNOP Ignore the input fflags.
NOTE_FFAND Bitwise AND fflags.
NOTE_FFOR Bitwise OR fflags.
NOTE_FFCOPY Copy fflags.
NOTE_FFCTRLMASK Control mask for fflags.
NOTE_FFLAGSMASK User defined flag mask for fflags.
A user event is triggered for output with the following:
NOTE_TRIGGER Cause the event to be triggered.
On return, fflags contains the users defined flags in the lower 24 bits.
CANCELLATION BEHAVIOUR
If nevents is non-zero, i.e., the function is potentially blocking, the call is a cancellation point.
Otherwise, i.e., if nevents is zero, the call is not cancellable. Cancellation can only occur before any
changes are made to the kqueue, or when the call was blocked and no changes to the queue were requested.
RETURN VALUES
The kqueue() system call creates a new kernel event queue and returns a file descriptor. If there was an
error creating the kernel event queue, a value of -1 is returned and errno set.
The kevent() system call returns the number of events placed in the eventlist, up to the value given by
nevents. If an error occurs while processing an element of the changelist and there is enough room in the
eventlist, then the event will be placed in the eventlist with EV_ERROR set in flags and the system error
in data. Otherwise, -1 will be returned, and errno will be set to indicate the error condition. If the
time limit expires, then kevent() returns 0.
EXAMPLES
#include <sys/event.h>
#include <err.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int
main(int argc, char **argv)
{
struct kevent event; /* Event we want to monitor */
struct kevent tevent; /* Event triggered */
int kq, fd, ret;
if (argc != 2)
err(EXIT_FAILURE, "Usage: %s path\n", argv[0]);
fd = open(argv[1], O_RDONLY);
if (fd == -1)
err(EXIT_FAILURE, "Failed to open '%s'", argv[1]);
/* Create kqueue. */
kq = kqueue();
if (kq == -1)
err(EXIT_FAILURE, "kqueue() failed");
/* Initialize kevent structure. */
EV_SET(&event, fd, EVFILT_VNODE, EV_ADD | EV_CLEAR, NOTE_WRITE,
0, NULL);
/* Attach event to the kqueue. */
ret = kevent(kq, &event, 1, NULL, 0, NULL);
if (ret == -1)
err(EXIT_FAILURE, "kevent register");
if (event.flags & EV_ERROR)
errx(EXIT_FAILURE, "Event error: %s", strerror(event.data));
for (;;) {
/* Sleep until something happens. */
ret = kevent(kq, NULL, 0, &tevent, 1, NULL);
if (ret == -1) {
err(EXIT_FAILURE, "kevent wait");
} else if (ret > 0) {
printf("Something was written in '%s'\n", argv[1]);
}
}
}
ERRORS
The kqueue() system call fails if:
[ENOMEM] The kernel failed to allocate enough memory for the kernel queue.
[ENOMEM] The RLIMIT_KQUEUES rlimit (see getrlimit(2)) for the current user would be exceeded.
[EMFILE] The per-process descriptor table is full.
[ENFILE] The system file table is full.
The kevent() system call fails if:
[EACCES] The process does not have permission to register a filter.
[EFAULT] There was an error reading or writing the kevent structure.
[EBADF] The specified descriptor is invalid.
[EINTR] A signal was delivered before the timeout expired and before any events were placed on
the kqueue for return.
[EINTR] A cancellation request was delivered to the thread, but not yet handled.
[EINVAL] The specified time limit or filter is invalid.
[ENOENT] The event could not be found to be modified or deleted.
[ENOMEM] No memory was available to register the event or, in the special case of a timer, the
maximum number of timers has been exceeded. This maximum is configurable via the
kern.kq_calloutmax sysctl.
[ESRCH] The specified process to attach to does not exist.
When kevent() call fails with EINTR error, all changes in the changelist have been applied.
SEE ALSO
aio_error(2), aio_read(2), aio_return(2), poll(2), read(2), select(2), sigaction(2), write(2), pthread_setcancelstate(3), signal(3) Jonathan Lemon, “Kqueue: A Generic and Scalable Event Notification Facility”, Proceedings of the FREENIX Track: 2001 USENIX Annual Technical Conference, USENIX Association, June 25-30, 2001.
HISTORY
The kqueue() and kevent() system calls first appeared in FreeBSD 4.1.
AUTHORS
The kqueue() system and this manual page were written by Jonathan Lemon <jlemon@FreeBSD.org>.
BUGS
The timeout value is limited to 24 hours; longer timeouts will be silently reinterpreted as 24 hours.
In versions older than FreeBSD 12.0, <sys/event.h> failed to parse without including <sys/types.h>
manually.