Provided by: podman_3.4.4+ds1-1ubuntu1.22.04.3_amd64 
NAME
podman-run - Run a command in a new container
SYNOPSIS
podman run [options] image [command [arg ...]]
podman container run [options] image [command [arg ...]]
DESCRIPTION
Run a process in a new container. podman run starts a process with its own file system,
its own networking, and its own isolated process tree. The image which starts the process
may define defaults related to the process that will be run in the container, the
networking to expose, and more, but podman run gives final control to the operator or
administrator who starts the container from the image. For that reason podman run has more
options than any other Podman command.
If the image is not already loaded then podman run will pull the image, and all image
dependencies, from the repository in the same way running podman pull image , before it
starts the container from that image.
Several files will be automatically created within the container. These include
/etc/hosts, /etc/hostname, and /etc/resolv.conf to manage networking. These will be based
on the host's version of the files, though they can be customized with options (for
example, --dns will override the host's DNS servers in the created resolv.conf).
Additionally, a container environment file is created in each container to indicate to
programs they are running in a container. This file is located at /run/.containerenv. When
using the --privileged flag the .containerenv contains name/value pairs indicating the
container engine version, whether the engine is running in rootless mode, the container
name and id, as well as the image name and id that the container is based on.
When running from a user defined network namespace, the /etc/netns/NSNAME/resolv.conf will
be used if it exists, otherwise /etc/resolv.conf will be used.
Default settings are defined in containers.conf. Most settings for remote connections use
the servers containers.conf, except when documented in man pages.
IMAGE
The image is specified using transport:path format. If no transport is specified, the
docker (container registry) transport will be used by default. For remote Podman, docker
is the only allowed transport.
dir:path
An existing local directory path storing the manifest, layer tarballs and signatures as
individual files. This is a non-standardized format, primarily useful for debugging or
noninvasive container inspection.
$ podman save --format docker-dir fedora -o /tmp/fedora
$ podman run dir:/tmp/fedora echo hello
docker://docker-reference (Default)
An image reference stored in a remote container image registry. Example:
"quay.io/podman/stable:latest". The reference can include a path to a specific registry;
if it does not, the registries listed in registries.conf will be queried to find a
matching image. By default, credentials from podman login (stored at
$XDG_RUNTIME_DIR/containers/auth.json by default) will be used to authenticate; otherwise
it falls back to using credentials in $HOME/.docker/config.json.
$ podman run registry.fedoraproject.org/fedora:latest echo hello
docker-archive:path[:docker-reference] An image stored in the docker save formatted file.
docker-reference is only used when creating such a file, and it must not contain a digest.
$ podman save --format docker-archive fedora -o /tmp/fedora
$ podman run docker-archive:/tmp/fedora echo hello
docker-daemon:docker-reference
An image in docker-reference format stored in the docker daemon internal storage. The
docker-reference can also be an image ID (docker-daemon:algo:digest).
$ sudo docker pull fedora
$ sudo podman run docker-daemon:docker.io/library/fedora echo hello
oci-archive:path:tag
An image in a directory compliant with the "Open Container Image Layout Specification"
at the specified path and specified with a tag.
$ podman save --format oci-archive fedora -o /tmp/fedora
$ podman run oci-archive:/tmp/fedora echo hello
OPTIONS
--add-host=host:ip
Add a line to container's /etc/hosts for custom host-to-IP mapping. This option can be
set multiple times.
--annotation=key=value
Add an annotation to the container. This option can be set multiple times.
--arch=ARCH
Override the architecture, defaults to hosts, of the image to be pulled. For example, arm.
--attach, -a=stdin|stdout|stderr
Attach to STDIN, STDOUT or STDERR.
In foreground mode (the default when -d is not specified), podman run can start the
process in the container and attach the console to the process's standard input, output,
and error. It can even pretend to be a TTY (this is what most commandline executables
expect) and pass along signals. The -a option can be set for each of stdin, stdout, and
stderr.
--authfile[=path]
Path to the authentication file. Default is ${XDG_RUNTIME_DIR}/containers/auth.json.
Note: You can also override the default path of the authentication file by setting the
REGISTRY_AUTH_FILE environment variable.
--blkio-weight=weight
Block IO relative weight. The weight is a value between 10 and 1000.
--blkio-weight-device=device:weight
Block IO relative device weight.
--cap-add=capability
Add Linux capabilities.
--cap-drop=capability
Drop Linux capabilities.
--cgroupns=mode
Set the cgroup namespace mode for the container.
• host: use the host's cgroup namespace inside the container.
• container:id: join the namespace of the specified container.
• private: create a new cgroup namespace.
• ns:path: join the namespace at the specified path.
If the host uses cgroups v1, the default is set to host. On cgroups v2, the default is
private.
--cgroups=enabled|disabled|no-conmon|split
Determines whether the container will create CGroups.
Default is enabled.
The enabled option will create a new cgroup under the cgroup-parent. The disabled option
will force the container to not create CGroups, and thus conflicts with CGroup options
(--cgroupns and --cgroup-parent). The no-conmon option disables a new CGroup only for the
conmon process. The split option splits the current CGroup in two sub-cgroups: one for
conmon and one for the container payload. It is not possible to set --cgroup-parent with
split.
--cgroup-parent=path
Path to cgroups under which the cgroup for the container will be created. If the path is
not absolute, the path is considered to be relative to the cgroups path of the init
process. Cgroups will be created if they do not already exist.
--cgroup-conf=KEY=VALUE
When running on cgroup v2, specify the cgroup file to write to and its value. For example
--cgroup-conf=memory.high=1073741824 sets the memory.high limit to 1GB.
--cidfile=file
Write the container ID to file.
--conmon-pidfile=file
Write the pid of the conmon process to a file. As conmon runs in a separate process than
Podman, this is necessary when using systemd to restart Podman containers. (This option
is not available with the remote Podman client)
--cpu-period=limit
Set the CPU period for the Completely Fair Scheduler (CFS), which is a duration in
microseconds. Once the container's CPU quota is used up, it will not be scheduled to run
until the current period ends. Defaults to 100000 microseconds.
On some systems, changing the CPU limits may not be allowed for non-root users. For more
details, see
https://github.com/containers/podman/blob/master/troubleshooting.md#26-running-containers-
with-cpu-limits-fails-with-a-permissions-error
--cpu-quota=limit
Limit the CPU Completely Fair Scheduler (CFS) quota.
Limit the container's CPU usage. By default, containers run with the full CPU resource.
The limit is a number in microseconds. If you provide a number, the container will be
allowed to use that much CPU time until the CPU period ends (controllable via --cpu-
period).
On some systems, changing the CPU limits may not be allowed for non-root users. For more
details, see
https://github.com/containers/podman/blob/master/troubleshooting.md#26-running-containers-
with-cpu-limits-fails-with-a-permissions-error
--cpu-rt-period=microseconds
Limit the CPU real-time period in microseconds.
Limit the container's Real Time CPU usage. This flag tell the kernel to restrict the
container's Real Time CPU usage to the period you specify.
This flag is not supported on cgroups V2 systems.
--cpu-rt-runtime=microseconds
Limit the CPU real-time runtime in microseconds.
Limit the containers Real Time CPU usage. This flag tells the kernel to limit the amount
of time in a given CPU period Real Time tasks may consume. Ex: Period of 1,000,000us and
Runtime of 950,000us means that this container could consume 95% of available CPU and
leave the remaining 5% to normal priority tasks.
The sum of all runtimes across containers cannot exceed the amount allotted to the parent
cgroup.
This flag is not supported on cgroups V2 systems.
--cpu-shares=shares
CPU shares (relative weight).
By default, all containers get the same proportion of CPU cycles. This proportion can be
modified by changing the container's CPU share weighting relative to the combined weight
of all the running containers. Default weight is 1024.
The proportion will only apply when CPU-intensive processes are running. When tasks in
one container are idle, other containers can use the left-over CPU time. The actual amount
of CPU time will vary depending on the number of containers running on the system.
For example, consider three containers, one has a cpu-share of 1024 and two others have a
cpu-share setting of 512. When processes in all three containers attempt to use 100% of
CPU, the first container would receive 50% of the total CPU time. If you add a fourth
container with a cpu-share of 1024, the first container only gets 33% of the CPU. The
remaining containers receive 16.5%, 16.5% and 33% of the CPU.
On a multi-core system, the shares of CPU time are distributed over all CPU cores. Even if
a container is limited to less than 100% of CPU time, it can use 100% of each individual
CPU core.
For example, consider a system with more than three cores. If you start one container {C0}
with --cpu-shares=512 running one process, and another container {C1} with --cpu-
shares=1024 running two processes, this can result in the following division of CPU
shares:
┌────┬───────────┬─────┬──────────────┐
│PID │ container │ CPU │ CPU share │
├────┼───────────┼─────┼──────────────┤
│100 │ {C0} │ 0 │ 100% of CPU0 │
├────┼───────────┼─────┼──────────────┤
│101 │ {C1} │ 1 │ 100% of CPU1 │
├────┼───────────┼─────┼──────────────┤
│102 │ {C1} │ 2 │ 100% of CPU2 │
└────┴───────────┴─────┴──────────────┘
--cpus=number
Number of CPUs. The default is 0.0 which means no limit. This is shorthand for --cpu-
period and --cpu-quota, so you may only set either
--cpus or --cpu-period and --cpu-quota.
On some systems, changing the CPU limits may not be allowed for non-root users. For more
details, see
https://github.com/containers/podman/blob/master/troubleshooting.md#26-running-containers-
with-cpu-limits-fails-with-a-permissions-error
--cpuset-cpus=number
CPUs in which to allow execution. Can be specified as a comma-separated list (e.g. 0,1),
as a range (e.g. 0-3), or any combination thereof (e.g. 0-3,7,11-15).
--cpuset-mems=nodes
Memory nodes (MEMs) in which to allow execution. Only effective on NUMA systems.
For example, if you have four memory nodes (0-3) on your system, use --cpuset-mems=0,1 to
only use memory from the first two memory nodes.
--detach, -d=true|false
Detached mode: run the container in the background and print the new container ID. The
default is false.
At any time you can run podman ps in the other shell to view a list of the running
containers. You can reattach to a detached container with podman attach.
When attached in the tty mode, you can detach from the container (and leave it running)
using a configurable key sequence. The default sequence is ctrl-p,ctrl-q. Configure the
keys sequence using the --detach-keys option, or specifying it in the containers.conf
file: see containers.conf(5) for more information.
--detach-keys=sequence
Specify the key sequence for detaching a container. Format is a single character [a-Z] or
one or more ctrl-<value> characters where <value> is one of: a-z, @, ^, [, , or _.
Specifying "" will set the sequence to the default value of ctrl-p,ctrl-q.
This option can also be set in containers.conf(5) file.
--device=host-device[:container-device][:permissions]
Add a host device to the container. Optional permissions parameter can be used to specify
device permissions, it is combination of r for read, w for write, and m for mknod(2).
Example: --device=/dev/sdc:/dev/xvdc:rwm.
Note: if _hostdevice is a symbolic link then it will be resolved first. The container
will only store the major and minor numbers of the host device.
Note: if the user only has access rights via a group, accessing the device from inside a
rootless container will fail. Use the --group-add keep-groups flag to pass the user's
supplementary group access into the container.
Podman may load kernel modules required for using the specified device. The devices that
Podman will load modules when necessary are: /dev/fuse.
--device-cgroup-rule=rule
Add a rule to the cgroup allowed devices list
--device-read-bps=path:rate
Limit read rate (in bytes per second) from a device (e.g. --device-read-bps=/dev/sda:1mb).
--device-read-iops=path:rate
Limit read rate (in IO operations per second) from a device (e.g. --device-read-
iops=/dev/sda:1000).
--device-write-bps=path:rate
Limit write rate (in bytes per second) to a device (e.g. --device-write-bps=/dev/sda:1mb).
--device-write-iops=path:rate
Limit write rate (in IO operations per second) to a device (e.g. --device-write-
iops=/dev/sda:1000).
--disable-content-trust
This is a Docker specific option to disable image verification to a Docker registry and is
not supported by Podman. This flag is a NOOP and provided solely for scripting
compatibility.
--dns=ipaddr
Set custom DNS servers. Invalid if using --dns with --network that is set to none or
container:id.
This option can be used to override the DNS configuration passed to the container.
Typically this is necessary when the host DNS configuration is invalid for the container
(e.g., 127.0.0.1). When this is the case the --dns flags is necessary for every run.
The special value none can be specified to disable creation of /etc/resolv.conf in the
container by Podman. The /etc/resolv.conf file in the image will be used without changes.
--dns-opt=option
Set custom DNS options. Invalid if using --dns-opt with --network that is set to none or
container:id.
--dns-search=domain
Set custom DNS search domains. Invalid if using --dns-search and --network that is set to
none or container:id. Use --dns-search=. if you don't wish to set the search domain.
--entrypoint="command" | '["command", arg1 , ...]'
Overwrite the default ENTRYPOINT of the image.
This option allows you to overwrite the default entrypoint of the image.
The ENTRYPOINT of an image is similar to a COMMAND because it specifies what executable to
run when the container starts, but it is (purposely) more difficult to override. The
ENTRYPOINT gives a container its default nature or behavior, so that when you set an
ENTRYPOINT you can run the container as if it were that binary, complete with default
options, and you can pass in more options via the COMMAND. But, sometimes an operator may
want to run something else inside the container, so you can override the default
ENTRYPOINT at runtime by using a --entrypoint and a string to specify the new ENTRYPOINT.
You need to specify multi option commands in the form of a json string.
--env, -e=env
Set environment variables.
This option allows arbitrary environment variables that are available for the process to
be launched inside of the container. If an environment variable is specified without a
value, Podman will check the host environment for a value and set the variable only if it
is set on the host. If an environment variable ending in * is specified, Podman will
search the host environment for variables starting with the prefix and will add those
variables to the container. If an environment variable with a trailing ***** is specified,
then a value must be supplied.
See Environment ⟨#environment⟩ note below for precedence and examples.
--env-host=true|false
Use host environment inside of the container. See Environment note below for precedence.
(This option is not available with the remote Podman client)
--env-file=file
Read in a line delimited file of environment variables. See Environment note below for
precedence.
--expose=port
Expose a port, or a range of ports (e.g. --expose=3300-3310) to set up port redirection on
the host system.
--gidmap=container_gid:host_gid:amount
Run the container in a new user namespace using the supplied mapping. This option
conflicts with the --userns and --subgidname flags. This option can be passed several
times to map different ranges. If calling podman run as an unprivileged user, the user
needs to have the right to use the mapping. See subuid(5). The example maps gids 0-1999
in the container to the gids 30000-31999 on the host: --gidmap=0:30000:2000.
Important note: The new user namespace mapping based on --gidmap is based on the initial
mapping made in the /etc/subgid file. Assuming there is a /etc/subgid mapping
groupname:100000:65536, then groupname is initially mapped to a namespace starting with
gid 100000 for 65536 ids. From here the --gidmap mapping to the new namespace starts from
0 again, but is based on the initial mapping. Meaning groupname is initially mapped to
gid 100000 which is referenced as 0 in the following --gidmap mapping. In terms of the
example above: The group groupname is mapped to group 100000 of the initial namespace then
the 30000st id of this namespace (which is gid 130000 in this namespace) is mapped to
container namespace group id 0. (groupname -> 100000 / 30000 -> 0)
--group-add=group|keep-groups
Add additional groups to assign to primary user running within the container process.
• keep-groups is a special flag that tells Podman to keep the supplementary group
access.
Allows container to use the user's supplementary group access. If file systems or devices
are only accessible by the rootless user's group, this flag tells the OCI runtime to pass
the group access into the container. Currently only available with the crun OCI runtime.
Note: keep-groups is exclusive, you cannot add any other groups with this flag. (Not
available for remote commands)
--health-cmd="command" | '["command", arg1 , ...]'
Set or alter a healthcheck command for a container. The command is a command to be
executed inside your container that determines your container health. The command is
required for other healthcheck options to be applied. A value of none disables existing
healthchecks.
Multiple options can be passed in the form of a JSON array; otherwise, the command will be
interpreted as an argument to /bin/sh -c.
--health-interval=interval
Set an interval for the healthchecks. An interval of disable results in no automatic timer
setup. The default is 30s.
--health-retries=retries
The number of retries allowed before a healthcheck is considered to be unhealthy. The
default value is 3.
--health-start-period=period
The initialization time needed for a container to bootstrap. The value can be expressed in
time format like 2m3s. The default value is 0s.
--health-timeout=timeout
The maximum time allowed to complete the healthcheck before an interval is considered
failed. Like start-period, the value can be expressed in a time format such as 1m22s. The
default value is 30s.
--help
Print usage statement
--hostname=name, -h
Container host name
Sets the container host name that is available inside the container. Can only be used with
a private UTS namespace --uts=private (default). If --pod is specified and the pod shares
the UTS namespace (default) the pod's hostname will be used.
--http-proxy=true|false
By default proxy environment variables are passed into the container if set for the Podman
process. This can be disabled by setting the value to false. The environment variables
passed in include http_proxy, https_proxy, ftp_proxy, no_proxy, and also the upper case
versions of those. This option is only needed when the host system must use a proxy but
the container should not use any proxy. Proxy environment variables specified for the
container in any other way will override the values that would have been passed through
from the host. (Other ways to specify the proxy for the container include passing the
values with the --env flag, or hard coding the proxy environment at container build time.)
(This option is not available with the remote Podman client)
Defaults to true.
--image-volume, builtin-volume=bind|tmpfs|ignore
Tells Podman how to handle the builtin image volumes. Default is bind.
• bind: An anonymous named volume will be created and mounted into the container.
• tmpfs: The volume is mounted onto the container as a tmpfs, which allows the
users to create content that disappears when the container is stopped.
• ignore: All volumes are just ignored and no action is taken.
--init
Run an init inside the container that forwards signals and reaps processes.
--init-path=path
Path to the container-init binary.
--interactive, -i=true|false
When set to true, keep stdin open even if not attached. The default is false.
--ip6=ip
Not implemented.
--ip=ip
Specify a static IP address for the container, for example 10.88.64.128. This option can
only be used if the container is joined to only a single network - i.e.,
--network=_network-name_ is used at most once and if the container is not joining another
container's network namespace via --network=container:_id_. The address must be within
the CNI network's IP address pool (default 10.88.0.0/16).
--ipc=mode
Set the IPC namespace mode for a container. The default is to create a private IPC
namespace.
• container:id: reuses another container shared memory, semaphores and message
queues
• host: use the host shared memory,semaphores and message queues inside the
container. Note: the host mode gives the container full access to local shared
memory and is therefore considered insecure.
• ns:path: path to an IPC namespace to join.
--kernel-memory=number[unit]
Kernel memory limit. A unit can be b (bytes), k (kilobytes), m (megabytes), or g
(gigabytes).
Constrains the kernel memory available to a container. If a limit of 0 is specified (not
using --kernel-memory), the container's kernel memory is not limited. If you specify a
limit, it may be rounded up to a multiple of the operating system's page size and the
value can be very large, millions of trillions.
This flag is not supported on cgroups V2 systems.
--label, -l=key=value
Add metadata to a container.
--label-file=file
Read in a line-delimited file of labels.
--link-local-ip=ip
Not implemented.
--log-driver="driver"
Logging driver for the container. Currently available options are k8s-file, journald, and
none, with json-file aliased to k8s-file for scripting compatibility.
--log-opt=name=value
Logging driver specific options.
Set custom logging configuration. The following *name*s are supported:
path: specify a path to the log file
(e.g. --log-opt path=/var/log/container/mycontainer.json);
max-size: specify a max size of the log file
(e.g. --log-opt max-size=10mb);
tag: specify a custom log tag for the container
(e.g. --log-opt tag="{{.ImageName}}".
This option is currently supported only by the journald log driver.
--mac-address=address
Container MAC address (e.g. 92:d0:c6:0a:29:33).
Remember that the MAC address in an Ethernet network must be unique. The IPv6 link-local
address will be based on the device's MAC address according to RFC4862.
--memory, -m=number[unit]
Memory limit. A unit can be b (bytes), k (kilobytes), m (megabytes), or g (gigabytes).
Allows you to constrain the memory available to a container. If the host supports swap
memory, then the -m memory setting can be larger than physical RAM. If a limit of 0 is
specified (not using -m), the container's memory is not limited. The actual limit may be
rounded up to a multiple of the operating system's page size (the value would be very
large, that's millions of trillions).
--memory-reservation=number[unit]
Memory soft limit. A unit can be b (bytes), k (kilobytes), m (megabytes), or g
(gigabytes).
After setting memory reservation, when the system detects memory contention or low memory,
containers are forced to restrict their consumption to their reservation. So you should
always set the value below --memory, otherwise the hard limit will take precedence. By
default, memory reservation will be the same as memory limit.
--memory-swap=number[unit]
A limit value equal to memory plus swap. A unit can be b (bytes), k (kilobytes), m
(megabytes), or g (gigabytes).
Must be used with the -m (--memory) flag. The argument value should always be larger than
that of
-m (--memory) By default, it is set to double the value of --memory.
Set number to -1 to enable unlimited swap.
--memory-swappiness=number
Tune a container's memory swappiness behavior. Accepts an integer between 0 and 100.
This flag is not supported on cgroups V2 systems.
--mount=type=TYPE,TYPE-SPECIFIC-OPTION[,...]
Attach a filesystem mount to the container
Current supported mount TYPEs are bind, volume, image, tmpfs and devpts. [1] ⟨#Footnote1⟩
e.g.
type=bind,source=/path/on/host,destination=/path/in/container
type=bind,src=/path/on/host,dst=/path/in/container,relabel=shared
type=volume,source=vol1,destination=/path/in/container,ro=true
type=tmpfs,tmpfs-size=512M,destination=/path/in/container
type=image,source=fedora,destination=/fedora-image,rw=true
type=devpts,destination=/dev/pts
Common Options:
· src, source: mount source spec for bind and volume. Mandatory for bind.
· dst, destination, target: mount destination spec.
Options specific to volume:
· ro, readonly: true or false (default).
Options specific to image:
· rw, readwrite: true or false (default).
Options specific to bind:
· ro, readonly: true or false (default).
· bind-propagation: shared, slave, private, unbindable, rshared, rslave, runbindable, or rprivate(default). See also mount(2).
. bind-nonrecursive: do not setup a recursive bind mount. By default it is recursive.
. relabel: shared, private.
Options specific to tmpfs:
· ro, readonly: true or false (default).
· tmpfs-size: Size of the tmpfs mount in bytes. Unlimited by default in Linux.
· tmpfs-mode: File mode of the tmpfs in octal. (e.g. 700 or 0700.) Defaults to 1777 in Linux.
· tmpcopyup: Enable copyup from the image directory at the same location to the tmpfs. Used by default.
· notmpcopyup: Disable copying files from the image to the tmpfs.
--name=name
Assign a name to the container.
The operator can identify a container in three ways:
• UUID long identifier
(“f78375b1c487e03c9438c729345e54db9d20cfa2ac1fc3494b6eb60872e74778”);
• UUID short identifier (“f78375b1c487”);
• Name (“jonah”).
Podman generates a UUID for each container, and if a name is not assigned to the container
with --name then it will generate a random string name. The name is useful any place you
need to identify a container. This works for both background and foreground containers.
--network=mode, --net
Set the network mode for the container. Invalid if using --dns, --dns-opt, or --dns-search
with --network that is set to none or container:id. If used together with --pod, the
container will not join the pods network namespace.
Valid mode values are:
• bridge: Create a network stack on the default bridge. This is the default for
rootfull containers.
• none: Create a network namespace for the container but do not configure network
interfaces for it, thus the container has no network connectivity.
• container:id: Reuse another container's network stack.
• host: Do not create a network namespace, the container will use the host's
network. Note: The host mode gives the container full access to local system
services such as D-bus and is therefore considered insecure.
• network: Connect to a user-defined network, multiple networks should be comma-
separated.
• ns:path: Path to a network namespace to join.
• private: Create a new namespace for the container. This will use the bridge mode
for rootfull containers and slirp4netns for rootless ones.
• slirp4netns[:OPTIONS,...]: use slirp4netns(1) to create a user network stack.
This is the default for rootless containers. It is possible to specify these
additional options:
• allow_host_loopback=true|false: Allow the slirp4netns to reach the host
loopback IP (10.0.2.2, which is added to /etc/hosts as host.containers.internal
for your convenience). Default is false.
• mtu=MTU: Specify the MTU to use for this network. (Default is 65520).
• cidr=CIDR: Specify ip range to use for this network. (Default is 10.0.2.0/24).
• enable_ipv6=true|false: Enable IPv6. Default is false. (Required for
outbound_addr6).
• outbound_addr=INTERFACE: Specify the outbound interface slirp should bind to
(ipv4 traffic only).
• outbound_addr=IPv4: Specify the outbound ipv4 address slirp should bind to.
• outbound_addr6=INTERFACE: Specify the outbound interface slirp should bind to
(ipv6 traffic only).
• outbound_addr6=IPv6: Specify the outbound ipv6 address slirp should bind to.
• port_handler=rootlesskit: Use rootlesskit for port forwarding. Default. Note:
Rootlesskit changes the source IP address of incoming packets to a IP address
in the container network namespace, usually 10.0.2.100. If your application
requires the real source IP address, e.g. web server logs, use the slirp4netns
port handler. The rootlesskit port handler is also used for rootless containers
when connected to user-defined networks.
• port_handler=slirp4netns: Use the slirp4netns port forwarding, it is slower
than rootlesskit but preserves the correct source IP address. This port handler
cannot be used for user-defined networks.
--network-alias=alias
Add network-scoped alias for the container. NOTE: A container will only have access to
aliases on the first network that it joins. This is a limitation that will be removed in a
later release.
--no-healthcheck=true|false
Disable any defined healthchecks for container.
--no-hosts=true|false
Do not create /etc/hosts for the container.
By default, Podman will manage /etc/hosts, adding the container's own IP address and any
hosts from --add-host.
--no-hosts disables this, and the image's /etc/hosts will be preserved unmodified.
This option conflicts with --add-host.
--oom-kill-disable=true|false
Whether to disable OOM Killer for the container or not.
--oom-score-adj=num
Tune the host's OOM preferences for containers (accepts values from -1000 to 1000).
--os=OS
Override the OS, defaults to hosts, of the image to be pulled. For example, windows.
--personality=persona
Personality sets the execution domain via Linux personality(2).
--pid=mode
Set the PID namespace mode for the container. The default is to create a private PID
namespace for the container.
• container:id: join another container's PID namespace;
• host: use the host's PID namespace for the container. Note the host mode gives
the container full access to local PID and is therefore considered insecure;
• private: create a new namespace for the container (default)
• ns:path: join the specified PID namespace.
--pids-limit=limit
Tune the container's pids limit. Set to -1 to have unlimited pids for the container. The
default is 4096 on systems that support "pids" cgroup controller.
--platform=OS/ARCH
Specify the platform for selecting the image. (Conflicts with --arch and --os) The
--platform option can be used to override the current architecture and operating system.
--pod=name
Run container in an existing pod. If you want Podman to make the pod for you, prefix the
pod name with new:. To make a pod with more granular options, use the podman pod create
command before creating a container. If a container is run with a pod, and the pod has an
infra-container, the infra-container will be started before the container is.
--pod-id-file=path
Run container in an existing pod and read the pod's ID from the specified file. If a
container is run within a pod, and the pod has an infra-container, the infra-container
will be started before the container is.
--preserve-fds=N
Pass down to the process N additional file descriptors (in addition to 0, 1, 2). The
total FDs will be 3+N. (This option is not available with the remote Podman client)
--privileged=true|false
Give extended privileges to this container. The default is false.
By default, Podman containers are unprivileged (=false) and cannot, for example, modify
parts of the operating system. This is because by default a container is only allowed
limited access to devices. A "privileged" container is given the same access to devices as
the user launching the container.
A privileged container turns off the security features that isolate the container from the
host. Dropped Capabilities, limited devices, read-only mount points, Apparmor/SELinux
separation, and Seccomp filters are all disabled.
Rootless containers cannot have more privileges than the account that launched them.
--publish, -p=ip:hostPort:containerPort | ip::containerPort | hostPort:containerPort |
containerPort
Publish a container's port, or range of ports, to the host.
Both hostPort and containerPort can be specified as a range of ports.
When specifying ranges for both, the number of container ports in the range must match the
number of host ports in the range.
If host IP is set to 0.0.0.0 or not set at all, the port will be bound on all IPs on the
host.
Host port does not have to be specified (e.g. podman run -p 127.0.0.1::80). If it is not,
the container port will be randomly assigned a port on the host.
Use podman port to see the actual mapping: podman port $CONTAINER $CONTAINERPORT.
Note: if a container will be run within a pod, it is not necessary to publish the port for
the containers in the pod. The port must only be published by the pod itself. Pod network
stacks act like the network stack on the host - you have a variety of containers in the
pod, and programs in the container, all sharing a single interface and IP address, and
associated ports. If one container binds to a port, no other container can use that port
within the pod while it is in use. Containers in the pod can also communicate over
localhost by having one container bind to localhost in the pod, and another connect to
that port.
--publish-all, -P=true|false
Publish all exposed ports to random ports on the host interfaces. The default is false.
When set to true, publish all exposed ports to the host interfaces. The default is false.
If the operator uses -P (or -p) then Podman will make the exposed port accessible on the
host and the ports will be available to any client that can reach the host.
When using this option, Podman will bind any exposed port to a random port on the host
within an ephemeral port range defined by /proc/sys/net/ipv4/ip_local_port_range. To find
the mapping between the host ports and the exposed ports, use podman port.
--pull=always|missing|never
Pull image before running. The default is missing.
• missing: attempt to pull the latest image from the registries listed in
registries.conf if a local image does not exist.Raise an error if the image is
not in any listed registry and is not present locally.
• always: Pull the image from the first registry it is found in as listed in
registries.conf. Raise an error if not found in the registries, even if the image
is present locally.
• never: do not pull the image from the registry, use only the local version. Raise
an error if the image is not present locally.
--quiet, -q
Suppress output information when pulling images
--read-only=true|false
Mount the container's root filesystem as read only.
By default a container will have its root filesystem writable allowing processes to write
files anywhere. By specifying the --read-only flag, the container will have its root
filesystem mounted as read only prohibiting any writes.
--read-only-tmpfs=true|false
If container is running in --read-only mode, then mount a read-write tmpfs on /run, /tmp,
and /var/tmp. The default is true.
--replace=true|false
If another container with the same name already exists, replace and remove it. The default
is false.
--requires=container
Specify one or more requirements. A requirement is a dependency container that will be
started before this container. Containers can be specified by name or ID, with multiple
containers being separated by commas.
--restart=policy
Restart policy to follow when containers exit. Restart policy will not take effect if a
container is stopped via the podman kill or podman stop commands.
Valid policy values are:
• no : Do not restart containers on exit
• on-failure[:max_retries] : Restart containers when they exit with a non-zero exit
code, retrying indefinitely or until the optional max_retries count is hit
• always : Restart containers when they exit, regardless of
status, retrying indefinitely
• unless-stopped : Identical to always
Please note that restart will not restart containers after a system reboot. If this
functionality is required in your environment, you can invoke Podman from a
systemd.unit(5) file, or create an init script for whichever init system is in use. To
generate systemd unit files, please see podman generate systemd.
--rm=true|false
Automatically remove the container when it exits. The default is false.
--rmi=true|false
After exit of the container, remove the image unless another container is using it. The
default is false.
--rootfs
If specified, the first argument refers to an exploded container on the file system.
This is useful to run a container without requiring any image management, the rootfs of
the container is assumed to be managed externally.
Note: On SELinux systems, the rootfs needs the correct label, which is by default
unconfined_u:object_r:container_file_t.
--sdnotify=container|conmon|ignore
Determines how to use the NOTIFY_SOCKET, as passed with systemd and Type=notify.
Default is container, which means allow the OCI runtime to proxy the socket into the
container to receive ready notification. Podman will set the MAINPID to conmon's pid. The
conmon option sets MAINPID to conmon's pid, and sends READY when the container has
started. The socket is never passed to the runtime or the container. The ignore option
removes NOTIFY_SOCKET from the environment for itself and child processes, for the case
where some other process above Podman uses NOTIFY_SOCKET and Podman should not use it.
--seccomp-policy=policy
Specify the policy to select the seccomp profile. If set to image, Podman will look for a
"io.containers.seccomp.profile" label in the container-image config and use its value as a
seccomp profile. Otherwise, Podman will follow the default policy by applying the default
profile unless specified otherwise via --security-opt seccomp as described below.
Note that this feature is experimental and may change in the future.
--secret=secret[,opt=opt ...]
Give the container access to a secret. Can be specified multiple times.
A secret is a blob of sensitive data which a container needs at runtime but should not be
stored in the image or in source control, such as usernames and passwords, TLS
certificates and keys, SSH keys or other important generic strings or binary content (up
to 500 kb in size).
When secrets are specified as type mount, the secrets are copied and mounted into the
container when a container is created. When secrets are specified as type env, the secret
will be set as an environment variable within the container. Secrets are written in the
container at the time of container creation, and modifying the secret using podman secret
commands after the container is created will not affect the secret inside the container.
Secrets and its storage are managed using the podman secret command.
Secret Options
• type=mount|env : How the secret will be exposed to the container. Default
mount.
• target=target : Target of secret. Defaults to secret name.
• uid=0 : UID of secret. Defaults to 0. Mount secret type only.
• gid=0 : GID of secret. Defaults to 0. Mount secret type only.
• mode=0 : Mode of secret. Defaults to 0444. Mount secret type only.
--security-opt=option
Security Options
• apparmor=unconfined : Turn off apparmor confinement for the container
• apparmor=your-profile : Set the apparmor confinement profile for the container
• label=user:USER: Set the label user for the container processes
• label=role:ROLE: Set the label role for the container processes
• label=type:TYPE: Set the label process type for the container processes
• label=level:LEVEL: Set the label level for the container processes
• label=filetype:TYPE_: Set the label file type for the container files
• label=disable: Turn off label separation for the container
Note: Labeling can be disabled for all containers by setting label=false in the
containers.conf (/etc/containers/containers.conf or
$HOME/.config/containers/containers.conf) file.
• mask=/path/1:/path/2: The paths to mask separated by a colon. A masked path
cannot be accessed inside the container.
• no-new-privileges: Disable container processes from gaining additional privileges
• seccomp=unconfined: Turn off seccomp confinement for the container
• seccomp=profile.json: Allowed syscall list seccomp JSON file to be used as a
seccomp filter
• proc-opts=OPTIONS : Comma-separated list of options to use for the /proc mount.
More details for the possible mount options are specified in the proc(5) man
page.
• unmask=ALL or /path/1:/path/2, or shell expanded paths (/proc/*): Paths to unmask
separated by a colon. If set to ALL, it will unmask all the paths that are masked
or made read only by default. The default masked paths are /proc/acpi,
/proc/kcore, /proc/keys, /proc/latency_stats, /proc/sched_debug, /proc/scsi,
/proc/timer_list, /proc/timer_stats, /sys/firmware, and /sys/fs/selinux.. The
default paths that are read only are /proc/asound, /proc/bus, /proc/fs,
/proc/irq, /proc/sys, /proc/sysrq-trigger, /sys/fs/cgroup.
Note: Labeling can be disabled for all containers by setting label=false in the
containers.conf(5) file.
--shm-size=number[unit]
Size of /dev/shm. A unit can be b (bytes), k (kilobytes), m (megabytes), or g (gigabytes).
If you omit the unit, the system uses bytes. If you omit the size entirely, the default is
64m. When size is 0, there is no limit on the amount of memory used for IPC by the
container.
--sig-proxy=true|false
Sets whether the signals sent to the podman run command are proxied to the container
process. SIGCHLD, SIGSTOP, and SIGKILL are not proxied. The default is true.
--stop-signal=signal
Signal to stop a container. Default is SIGTERM.
--stop-timeout=seconds
Timeout to stop a container. Default is 10. Remote connections use local containers.conf
for defaults
--subgidname=name
Run the container in a new user namespace using the map with name in the /etc/subgid file.
If calling podman run as an unprivileged user, the user needs to have the right to use the
mapping. See subgid(5). This flag conflicts with --userns and --gidmap.
--subuidname=name
Run the container in a new user namespace using the map with name in the /etc/subuid file.
If calling podman run as an unprivileged user, the user needs to have the right to use the
mapping. See subuid(5). This flag conflicts with --userns and --uidmap.
--sysctl=name=value
Configure namespaced kernel parameters at runtime.
For the IPC namespace, the following sysctls are allowed:
• kernel.msgmax
• kernel.msgmnb
• kernel.msgmni
• kernel.sem
• kernel.shmall
• kernel.shmmax
• kernel.shmmni
• kernel.shm_rmid_forced
• Sysctls beginning with fs.mqueue.*
Note: if you use the --ipc=host option, the above sysctls will not be allowed.
For the network namespace, the following sysctls are allowed:
• Sysctls beginning with net.*
Note: if you use the --network=host option, these sysctls will not be allowed.
--systemd=true|false|always
Run container in systemd mode. The default is true.
The value always enforces the systemd mode is enforced without looking at the executable
name. Otherwise, if set to true and the command you are running inside the container is
systemd, /usr/sbin/init, /sbin/init or /usr/local/sbin/init.
If the command you are running inside of the container is systemd Podman will setup tmpfs
mount points in the following directories:
• /run
• /run/lock
• /tmp
• /sys/fs/cgroup/systemd
• /var/lib/journal
It will also set the default stop signal to SIGRTMIN+3.
This allows systemd to run in a confined container without any modifications.
Note that on SELinux systems, systemd attempts to write to the cgroup file system.
Containers writing to the cgroup file system are denied by default. The
container_manage_cgroup boolean must be enabled for this to be allowed on an SELinux
separated system.
setsebool -P container_manage_cgroup true
--timeout=seconds
Maximum time a container is allowed to run before conmon sends it the kill signal. By
default containers will run until they exit or are stopped by podman stop.
--tls-verify=true|false
Require HTTPS and verify certificates when contacting registries (default: true). If
explicitly set to true, then TLS verification will be used. If set to false, then TLS
verification will not be used. If not specified, TLS verification will be used unless the
target registry is listed as an insecure registry in registries.conf.
--tmpfs=fs
Create a tmpfs mount.
Mount a temporary filesystem (tmpfs) mount into a container, for example:
$ podman run -d --tmpfs /tmp:rw,size=787448k,mode=1777 my_image
This command mounts a tmpfs at /tmp within the container. The supported mount options are
the same as the Linux default mount flags. If you do not specify any options, the systems
uses the following options: rw,noexec,nosuid,nodev.
--tty, -t=true|false
Allocate a pseudo-TTY. The default is false.
When set to true, Podman will allocate a pseudo-tty and attach to the standard input of
the container. This can be used, for example, to run a throwaway interactive shell. The
default is false.
NOTE: The --tty flag prevents redirection of standard output. It combines STDOUT and
STDERR, it can insert control characters, and it can hang pipes. This option should only
be used when run interactively in a terminal. When feeding input to Podman, use -i only,
not -it.
echo "asdf" | podman run --rm -i someimage /bin/cat
--tz=timezone
Set timezone in container. This flag takes area-based timezones, GMT time, as well as
local, which sets the timezone in the container to match the host machine. See
/usr/share/zoneinfo/ for valid timezones. Remote connections use local containers.conf
for defaults
--umask=umask
Set the umask inside the container. Defaults to 0022. Remote connections use local
containers.conf for defaults
--uidmap=container_uid:from_uid:amount
Run the container in a new user namespace using the supplied mapping. This option
conflicts with the --userns and --subuidname options. This option provides a way to map
host UIDs to container UIDs. It can be passed several times to map different ranges.
The _fromuid value is based upon the user running the command, either rootfull or rootless
users. * rootfull user: container_uid:host_uid:amount * rootless user:
container_uid:intermediate_uid:amount
When podman run is called by a privileged user, the option --uidmap works as a direct
mapping between host UIDs and container UIDs.
host UID -> container UID
The amount specifies the number of consecutive UIDs that will be mapped. If for example
amount is 4 the mapping would look like:
| host UID | container UID | | - | - | |
_fromuid | _containeruid | | _fromuid + 1 | _containeruid + 1 | | _fromuid + 2 |
_containeruid + 2 | | _fromuid + 3 | _containeruid + 3 |
When podman run is called by an unprivileged user (i.e. running rootless), the value
_fromuid is interpreted as an "intermediate UID". In the rootless case, host UIDs are not
mapped directly to container UIDs. Instead the mapping happens over two mapping steps:
host UID -> intermediate UID -> container UID
The --uidmap option only influences the second mapping step.
The first mapping step is derived by Podman from the contents of the file /etc/subuid and
the UID of the user calling Podman.
First mapping step:
| host UID | intermediate UID | | -
| - | | UID for the user starting Podman | 0
| | 1st subordinate UID for the user starting Podman | 1 | | 2nd
subordinate UID for the user starting Podman | 2 | | 3rd subordinate UID
for the user starting Podman | 3 | | nth subordinate UID for the user
starting Podman | n |
To be able to use intermediate UIDs greater than zero, the user needs to have subordinate
UIDs configured in /etc/subuid. See subuid(5).
The second mapping step is configured with --uidmap.
If for example amount is 5 the second mapping step would look like:
| intermediate UID | container UID | | - | -
| | _fromuid | _containeruid | | _fromuid + 1 | _containeruid + 1 | |
_fromuid + 2 | _containeruid + 2 | | _fromuid + 3 | _containeruid + 3 | |
_fromuid + 4 | _containeruid + 4 |
Even if a user does not have any subordinate UIDs in /etc/subuid, --uidmap could still be
used to map the normal UID of the user to a container UID by running podman run --uidmap
$container_uid:0:1 --user $container_uid ....
--ulimit=option
Ulimit options. You can use host to copy the current configuration from the host.
--user, -u=[user | user:group | uid | uid:gid | user:gid | uid:group ]
Sets the username or UID used and optionally the groupname or GID for the specified
command.
Without this argument, the command will run as the user specified in the container image.
Unless overridden by a USER command in the Containerfile or by a value passed to this
option, this user generally defaults to root.
When a user namespace is not in use, the UID and GID used within the container and on the
host will match. When user namespaces are in use, however, the UID and GID in the
container may correspond to another UID and GID on the host. In rootless containers, for
example, a user namespace is always used, and root in the container will by default
correspond to the UID and GID of the user invoking Podman.
--userns=mode
Set the user namespace mode for the container. It defaults to the PODMAN_USERNS
environment variable. An empty value ("") means user namespaces are disabled unless an
explicit mapping is set with the --uidmap and --gidmap options.
Valid mode values are:
auto[:OPTIONS,...]: automatically create a unique user namespace.
The --userns=auto flag, requires that the user name containers and a range of subordinate
user ids that the Podman container is allowed to use be specified in the /etc/subuid and
/etc/subgid files.
Example: containers:2147483647:2147483648.
Podman allocates unique ranges of UIDs and GIDs from the containers subpordinate user ids.
The size of the ranges is based on the number of UIDs required in the image. The number of
UIDs and GIDs can be overridden with the size option. The auto options currently does not
work in rootless mode
Valid auto options:
• gidmapping=_CONTAINER_GID:HOSTGID:SIZE: to force a GID mapping to be present in
the user namespace.
• size=SIZE: to specify an explicit size for the automatic user namespace. e.g.
--userns=auto:size=8192. If size is not specified, auto will estimate a size for
the user namespace.
• uidmapping=_CONTAINER_UID:HOSTUID:SIZE: to force a UID mapping to be present in
the user namespace.
container:id: join the user namespace of the specified container.
host: run in the user namespace of the caller. The processes running in the container will
have the same privileges on the host as any other process launched by the calling user
(default).
keep-id: creates a user namespace where the current rootless user's UID:GID are mapped to
the same values in the container. This option is ignored for containers created by the
root user.
ns:namespace: run the container in the given existing user namespace.
private: create a new namespace for the container.
This option is incompatible with --gidmap, --uidmap, --subuidname and --subgidname.
--uts=mode
Set the UTS namespace mode for the container. The following values are supported:
• host: use the host's UTS namespace inside the container.
• private: create a new namespace for the container (default).
• ns:[path]: run the container in the given existing UTS namespace.
• container:[container]: join the UTS namespace of the specified container.
--variant=VARIANT
Use VARIANT instead of the default architecture variant of the container image. Some
images can use multiple variants of the arm architectures, such as arm/v5 and arm/v7.
--volume, -v[=[[SOURCE-VOLUME|HOST-DIR:]CONTAINER-DIR[:OPTIONS]]]
Create a bind mount. If you specify /HOST-DIR:/CONTAINER-DIR, Podman bind mounts host-dir
in the host to CONTAINER-DIR in the Podman container. Similarly, SOURCE-VOLUME:/CONTAINER-
DIR will mount the volume in the host to the container. If no such named volume exists,
Podman will create one. (Note when using the remote client, the volumes will be mounted
from the remote server, not necessarily the client machine.)
The options is a comma-separated list and can be: [1] ⟨#Footnote1⟩
• rw|ro
• z|Z
• [r]shared|[r]slave|[r]private[r]unbindable
• [r]bind
• [no]exec
• [no]dev
• [no]suid
• [O]
• [U]
The CONTAINER-DIR must be an absolute path such as /src/docs. The volume will be mounted
into the container at this directory.
Volumes may specify a source as well, as either a directory on the host or the name of a
named volume. If no source is given, the volume will be created as an anonymously named
volume with a randomly generated name, and will be removed when the container is removed
via the --rm flag or podman rm --volumes.
If a volume source is specified, it must be a path on the host or the name of a named
volume. Host paths are allowed to be absolute or relative; relative paths are resolved
relative to the directory Podman is run in. If the source does not exist, Podman will
return an error. Users must pre-create the source files or directories.
Any source that does not begin with a . or / will be treated as the name of a named
volume. If a volume with that name does not exist, it will be created. Volumes created
with names are not anonymous, and they are not removed by the --rm option and the podman
rm --volumes command.
You can specify multiple -v options to mount one or more volumes into a container.
Write Protected Volume Mounts
You can add :ro or :rw option to mount a volume in read-only or read-write mode,
respectively. By default, the volumes are mounted read-write.
Chowning Volume Mounts
By default, Podman does not change the owner and group of source volume directories
mounted into containers. If a container is created in a new user namespace, the UID and
GID in the container may correspond to another UID and GID on the host.
The :U suffix tells Podman to use the correct host UID and GID based on the UID and GID
within the container, to change recursively the owner and group of the source volume.
Warning use with caution since this will modify the host filesystem.
Labeling Volume Mounts
Labeling systems like SELinux require that proper labels are placed on volume content
mounted into a container. Without a label, the security system might prevent the processes
running inside the container from using the content. By default, Podman does not change
the labels set by the OS.
To change a label in the container context, you can add either of two suffixes :z or :Z to
the volume mount. These suffixes tell Podman to relabel file objects on the shared
volumes. The z option tells Podman that two containers share the volume content. As a
result, Podman labels the content with a shared content label. Shared volume labels allow
all containers to read/write content. The Z option tells Podman to label the content with
a private unshared label.
Note: Do not relabel system files and directories. Relabeling system content might cause
other confined services on your machine to fail. For these types of containers we
recommend that disable SELinux separation. The option --security-opt label=disable
disables SELinux separation for the container. For example if a user wanted to volume
mount their entire home directory into a container, they need to disable SELinux
separation.
$ podman run --security-opt label=disable -v $HOME:/home/user fedora touch /home/user/file
Overlay Volume Mounts
The :O flag tells Podman to mount the directory from the host as a temporary storage using
the overlay file system. The container processes can modify content within the mountpoint
which is stored in the container storage in a separate directory. In overlay terms, the
source directory will be the lower, and the container storage directory will be the upper.
Modifications to the mount point are destroyed when the container finishes executing,
similar to a tmpfs mount point being unmounted.
Subsequent executions of the container will see the original source directory content, any
changes from previous container executions no longer exist.
One use case of the overlay mount is sharing the package cache from the host into the
container to allow speeding up builds.
Note:
- The `O` flag conflicts with other options listed above.
Content mounted into the container is labeled with the private label.
On SELinux systems, labels in the source directory must be readable by the
container label. Usually containers can read/execute container_share_t and can read/write
container_file_t. If you cannot change the labels on a source volume, SELinux container
separation must be disabled for the container to work.
- The source directory mounted into the container with an overlay mount should not be
modified, it can cause unexpected failures. It is recommended that you do not modify the
directory until the container finishes running.
Only the current container can use a private volume.
Mounts propagation
By default bind mounted volumes are private. That means any mounts done inside container
will not be visible on host and vice versa. One can change this behavior by specifying a
volume mount propagation property. Making a volume shared mounts done under that volume
inside container will be visible on host and vice versa. Making a volume slave enables
only one way mount propagation and that is mounts done on host under that volume will be
visible inside container but not the other way around. [1] ⟨#Footnote1⟩
To control mount propagation property of volume one can use [r]shared, [r]slave,
[r]private or [r]unbindable propagation flag. Propagation property can be specified only
for bind mounted volumes and not for internal volumes or named volumes. For mount
propagation to work source mount point (mount point where source dir is mounted on) has to
have right propagation properties. For shared volumes, source mount point has to be
shared. And for slave volumes, source mount has to be either shared or slave. [1]
⟨#Footnote1⟩
If you want to recursively mount a volume and all of its submounts into a container, then
you can use the rbind option. By default the bind option is used, and submounts of the
source directory will not be mounted into the container.
Mounting the volume with the nosuid options means that SUID applications on the volume
will not be able to change their privilege. By default volumes are mounted with nosuid.
Mounting the volume with the noexec option means that no executables on the volume will be
able to executed within the container.
Mounting the volume with the nodev option means that no devices on the volume will be able
to be used by processes within the container. By default volumes are mounted with nodev.
If the host-dir is a mount point, then dev, suid, and exec options are ignored by the
kernel.
Use df $hostdir to figure out the source mount, and then use findmnt -o TARGET,PROPAGATION
source-mount-dir to figure out propagation properties of source mount. If findmnt(1)
utility is not available, then one can look at mount entry for source mount point in
/proc/self/mountinfo. Look at the "optional fields" and see if any propagation properties
are specified. In there, shared:N means the mount is shared, master:N means mount is
slave, and if nothing is there, the mount is private. [1] ⟨#Footnote1⟩
To change propagation properties of a mount point, use mount(8) command. For example, if
one wants to bind mount source directory /foo, one can do mount --bind /foo /foo and mount
--make-private --make-shared /foo. This will convert /foo into a shared mount point.
Alternatively, one can directly change propagation properties of source mount. Say, if /
is source mount for /foo, then use mount --make-shared / to convert / into a shared mount.
Note: if the user only has access rights via a group, accessing the volume from inside a
rootless container will fail. Use the --group-add keep-groups flag to pass the user's
supplementary group access into the container.
--volumes-from[=CONTAINER[:OPTIONS]]
Mount volumes from the specified container(s). Used to share volumes between containers.
The options is a comma-separated list with the following available elements:
• rw|ro
• z
Mounts already mounted volumes from a source container onto another container. You must
supply the source's container-id or container-name. To share a volume, use the --volumes-
from option when running the target container. You can share volumes even if the source
container is not running.
By default, Podman mounts the volumes in the same mode (read-write or read-only) as it is
mounted in the source container. You can change this by adding a ro or rw option.
Labeling systems like SELinux require that proper labels are placed on volume content
mounted into a container. Without a label, the security system might prevent the processes
running inside the container from using the content. By default, Podman does not change
the labels set by the OS.
To change a label in the container context, you can add z to the volume mount. This
suffix tells Podman to relabel file objects on the shared volumes. The z option tells
Podman that two containers share the volume content. As a result, Podman labels the
content with a shared content label. Shared volume labels allow all containers to
read/write content.
If the location of the volume from the source container overlaps with data residing on a
target container, then the volume hides that data on the target.
--workdir, -w=dir
Working directory inside the container.
The default working directory for running binaries within a container is the root
directory (/). The image developer can set a different default with the WORKDIR
instruction. The operator can override the working directory by using the -w option.
--pidfile=path
When the pidfile location is specified, the container process' PID will be written to the
pidfile. (This option is not available with the remote Podman client) If the pidfile
option is not specified, the container process' PID will be written to
/run/containers/storage/${storage-driver}-containers/$CID/userdata/pidfile.
After the container is started, the location for the pidfile can be discovered with the
following podman inspect command:
$ podman inspect --format '{{ .PidFile }}' $CID
/run/containers/storage/${storage-driver}-containers/$CID/userdata/pidfile
Exit Status
The exit code from podman run gives information about why the container failed to run or
why it exited. When podman run exits with a non-zero code, the exit codes follow the
chroot(1) standard, see below:
125 The error is with Podman itself
$ podman run --foo busybox; echo $?
Error: unknown flag: --foo
125
126 The contained command cannot be invoked
$ podman run busybox /etc; echo $?
Error: container_linux.go:346: starting container process caused "exec: \"/etc\": permission denied": OCI runtime error
126
127 The contained command cannot be found
$ podman run busybox foo; echo $?
Error: container_linux.go:346: starting container process caused "exec: \"foo\": executable file not found in $PATH": OCI runtime error
127
Exit code contained command exit code
$ podman run busybox /bin/sh -c 'exit 3'; echo $?
3
EXAMPLES
Running container in read-only mode
During container image development, containers often need to write to the image content.
Installing packages into /usr, for example. In production, applications seldom need to
write to the image. Container applications write to volumes if they need to write to file
systems at all. Applications can be made more secure by running them in read-only mode
using the --read-only switch. This protects the containers image from modification. Read
only containers may still need to write temporary data. The best way to handle this is to
mount tmpfs directories on /run and /tmp.
$ podman run --read-only -i -t fedora /bin/bash
$ podman run --read-only --read-only-tmpfs=false --tmpfs /run -i -t fedora /bin/bash
Exposing log messages from the container to the host's log
If you want messages that are logged in your container to show up in the host's
syslog/journal then you should bind mount the /dev/log directory as follows.
$ podman run -v /dev/log:/dev/log -i -t fedora /bin/bash
From inside the container you can test this by sending a message to the log.
(bash)# logger "Hello from my container"
Then exit and check the journal.
(bash)# exit
$ journalctl -b | grep Hello
This should list the message sent to logger.
Attaching to one or more from STDIN, STDOUT, STDERR
If you do not specify -a, Podman will attach everything (stdin, stdout, stderr). You can
specify to which of the three standard streams (stdin, stdout, stderr) you'd like to
connect instead, as in:
$ podman run -a stdin -a stdout -i -t fedora /bin/bash
Sharing IPC between containers
Using shm_server.c available here: https://www.cs.cf.ac.uk/Dave/C/node27.html
Testing --ipc=host mode:
Host shows a shared memory segment with 7 pids attached, happens to be from httpd:
$ sudo ipcs -m
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0x01128e25 0 root 600 1000 7
Now run a regular container, and it correctly does NOT see the shared memory segment from
the host:
$ podman run -it shm ipcs -m
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
Run a container with the new --ipc=host option, and it now sees the shared memory segment
from the host httpd:
$ podman run -it --ipc=host shm ipcs -m
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0x01128e25 0 root 600 1000 7
Testing --ipc=container:id mode:
Start a container with a program to create a shared memory segment:
$ podman run -it shm bash
$ sudo shm/shm_server &
$ sudo ipcs -m
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0x0000162e 0 root 666 27 1
Create a 2nd container correctly shows no shared memory segment from 1st container:
$ podman run shm ipcs -m
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
Create a 3rd container using the --ipc=container:id option, now it shows the shared memory
segment from the first:
$ podman run -it --ipc=container:ed735b2264ac shm ipcs -m
$ sudo ipcs -m
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0x0000162e 0 root 666 27 1
Mapping Ports for External Usage
The exposed port of an application can be mapped to a host port using the -p flag. For
example, an httpd port 80 can be mapped to the host port 8080 using the following:
$ podman run -p 8080:80 -d -i -t fedora/httpd
Mounting External Volumes
To mount a host directory as a container volume, specify the absolute path to the
directory and the absolute path for the container directory separated by a colon. If the
source is a named volume maintained by Podman, it is recommended to use its name rather
than the path to the volume. Otherwise the volume will be considered as an orphan and
wiped if you execute podman volume prune:
$ podman run -v /var/db:/data1 -i -t fedora bash
$ podman run -v data:/data2 -i -t fedora bash
$ podman run -v /var/cache/dnf:/var/cache/dnf:O -ti fedora dnf -y update
$ podman run -d -e MYSQL_ROOT_PASSWORD=root --user mysql --userns=keep-id -v ~/data:/var/lib/mysql:z,U mariadb
Using --mount flags to mount a host directory as a container folder, specify the absolute
path to the directory or the volume name, and the absolute path within the container
directory:
$ podman run --mount type=bind,src=/var/db,target=/data1 busybox sh
$ podman run --mount type=bind,src=volume-name,target=/data1 busybox sh
When using SELinux, be aware that the host has no knowledge of container SELinux policy.
Therefore, in the above example, if SELinux policy is enforced, the /var/db directory is
not writable to the container. A "Permission Denied" message will occur and an avc:
message in the host's syslog.
To work around this, at time of writing this man page, the following command needs to be
run in order for the proper SELinux policy type label to be attached to the host
directory:
$ chcon -Rt svirt_sandbox_file_t /var/db
Now, writing to the /data1 volume in the container will be allowed and the changes will
also be reflected on the host in /var/db.
Using alternative security labeling
You can override the default labeling scheme for each container by specifying the
--security-opt flag. For example, you can specify the MCS/MLS level, a requirement for MLS
systems. Specifying the level in the following command allows you to share the same
content between containers.
podman run --security-opt label=level:s0:c100,c200 -i -t fedora bash
An MLS example might be:
$ podman run --security-opt label=level:TopSecret -i -t rhel7 bash
To disable the security labeling for this container versus running with the
--permissive flag, use the following command:
$ podman run --security-opt label=disable -i -t fedora bash
If you want a tighter security policy on the processes within a container, you can specify
an alternate type for the container. You could run a container that is only allowed to
listen on Apache ports by executing the following command:
$ podman run --security-opt label=type:svirt_apache_t -i -t centos bash
Note you would have to write policy defining a svirt_apache_t type.
To mask additional specific paths in the container, specify the paths separated by a colon
using the mask option with the --security-opt flag.
$ podman run --security-opt mask=/foo/bar:/second/path fedora bash
To unmask all the paths that are masked by default, set the unmask option to ALL. Or to
only unmask specific paths, specify the paths as shown above with the mask option.
$ podman run --security-opt unmask=ALL fedora bash
To unmask all the paths that start with /proc, set the unmask option to /proc/*.
$ podman run --security-opt unmask=/proc/* fedora bash
$ podman run --security-opt unmask=/foo/bar:/sys/firmware fedora bash
Setting device weight
If you want to set /dev/sda device weight to 200, you can specify the device weight by
--blkio-weight-device flag. Use the following command:
$ podman run -it --blkio-weight-device "/dev/sda:200" ubuntu
Using a podman container with input from a pipe
$ echo "asdf" | podman run --rm -i --entrypoint /bin/cat someimage
asdf
Setting automatic user namespace separated containers
# podman run --userns=auto:size=65536 ubi8-micro cat /proc/self/uid_map
0 2147483647 65536
# podman run --userns=auto:size=65536 ubi8-micro cat /proc/self/uid_map
0 2147549183 65536
Setting Namespaced Kernel Parameters (Sysctls)
The --sysctl sets namespaced kernel parameters (sysctls) in the container. For example, to
turn on IP forwarding in the containers network namespace, run this command:
$ podman run --sysctl net.ipv4.ip_forward=1 someimage
Note that not all sysctls are namespaced. Podman does not support changing sysctls inside
of a container that also modify the host system. As the kernel evolves we expect to see
more sysctls become namespaced.
See the definition of the --sysctl option above for the current list of supported sysctls.
Set UID/GID mapping in a new user namespace
Running a container in a new user namespace requires a mapping of the uids and gids from
the host.
$ podman run --uidmap 0:30000:7000 --gidmap 0:30000:7000 fedora echo hello
Configuring Storage Options from the command line
Podman allows for the configuration of storage by changing the values in the
/etc/container/storage.conf or by using global options. This shows how to setup and use
fuse-overlayfs for a one time run of busybox using global options.
podman --log-level=debug --storage-driver overlay --storage-opt "overlay.mount_program=/usr/bin/fuse-overlayfs" run busybox /bin/sh
Configure timezone in a container
$ podman run --tz=local alpine date
$ podman run --tz=Asia/Shanghai alpine date
$ podman run --tz=US/Eastern alpine date
Adding dependency containers
The first container, container1, is not started initially, but must be running before
container2 will start. The podman run command will start the container automatically
before starting container2.
$ podman create --name container1 -t -i fedora bash
$ podman run --name container2 --requires container1 -t -i fedora bash
Multiple containers can be required.
$ podman create --name container1 -t -i fedora bash
$ podman create --name container2 -t -i fedora bash
$ podman run --name container3 --requires container1,container2 -t -i fedora bash
Configure keep supplemental groups for access to volume
$ podman run -v /var/lib/design:/var/lib/design --group-add keep-groups ubi8
Configure execution domain for containers using personality flag
$ podman run --name container1 --personaity=LINUX32 fedora bash
Rootless Containers
Podman runs as a non root user on most systems. This feature requires that a new enough
version of shadow-utils be installed. The shadow-utils package must include the
newuidmap(1) and newgidmap(1) executables.
Note: RHEL7 and Centos 7 will not have this feature until RHEL7.7 is released.
In order for users to run rootless, there must be an entry for their username in
/etc/subuid and /etc/subgid which lists the UIDs for their user namespace.
Rootless Podman works better if the fuse-overlayfs and slirp4netns packages are installed.
The fuse-overlayfs package provides a userspace overlay storage driver, otherwise users
need to use the vfs storage driver, which is diskspace expensive and does not perform
well. slirp4netns is required for VPN, without it containers need to be run with the
--network=host flag.
ENVIRONMENT
Environment variables within containers can be set using multiple different options, in
the following order of precedence (later entries override earlier entries):
• Container image: Any environment variables specified in the container image.
• --http-proxy: By default, several environment variables will be passed in from
the host, such as http_proxy and no_proxy. See --http-proxy for details.
• --env-host: Host environment of the process executing Podman is added.
• --env-file: Any environment variables specified via env-files. If multiple files
specified, then they override each other in order of entry.
• --env: Any environment variables specified will override previous settings.
Run containers and set the environment ending with a * and a *****:
$ export ENV1=a
$ podman run --env ENV* alpine printenv ENV1
a
$ podman run --env ENV*****=b alpine printenv ENV*****
b
CONMON
When Podman starts a container it actually executes the conmon program, which then
executes the OCI Runtime. Conmon is the container monitor. It is a small program whose
job is to watch the primary process of the container, and if the container dies, save the
exit code. It also holds open the tty of the container, so that it can be attached to
later. This is what allows Podman to run in detached mode (backgrounded), so Podman can
exit but conmon continues to run. Each container has their own instance of conmon. Conmon
waits for the container to exit, gathers and saves the exit code, and then launches a
Podman process to complete the container cleanup, by shutting down the network and
storage. For more information on conmon, please reference the conmon(8) man page.
FILES
/etc/subuid
/etc/subgid
NOTE: Use the environment variable TMPDIR to change the temporary storage location of
downloaded container images. Podman defaults to use /var/tmp.
SEE ALSO
podman(1), podman-save(1), podman-ps(1), podman-attach(1), podman-pod-create(1), podman-
port(1), podman-start(1), podman-kill(1), podman-stop(1), podman-generate-systemd(1)
podman-rm(1), subgid(5), subuid(5), containers.conf(5), systemd.unit(5), setsebool(8),
slirp4netns(1), fuse-overlayfs(1), proc(5), conmon(8), personality(2).
HISTORY
September 2018, updated by Kunal Kushwaha <kushwaha_kunal_v7@lab.ntt.co.jp>
October 2017, converted from Docker documentation to Podman by Dan Walsh for Podman
<dwalsh@redhat.com>
November 2015, updated by Sally O'Malley <somalley@redhat.com>
June 2014, updated by Sven Dowideit <SvenDowideit@home.org.au>
April 2014, Originally compiled by William Henry <whenry@redhat.com> based on docker.com
source material and internal work.
FOOTNOTES
1: The Podman project is committed to inclusivity, a core value of open source. The master
and slave mount propagation terminology used here is problematic and divisive, and should
be changed. However, these terms are currently used within the Linux kernel and must be
used as-is at this time. When the kernel maintainers rectify this usage, Podman will
follow suit immediately.
podman-run(1)()