Provided by: rsbackup_6.0-2build1_amd64 
NAME
rsbackup - rsync-based backup utility
SYNOPSIS
rsbackup [OPTIONS] [--] [SELECTOR...]
rsbackup --retire [OPTIONS] [--] [SELECTOR...]
rsbackup --retire-device [OPTIONS] [--] DEVICE...
DESCRIPTION
rsbackup backs up files from one or more (remote) destinations to a single backup storage
directory, preserving their contents, layout, ownership, permissions, timestamps and
hardlink structure.
Incremental backups are achieved by hard-linking identical files within successive backups
of the same files.
See rsbackup(5) for details of the configuration file.
OPTIONS
Action Options
At least one of these options must be specified. When multiple actions are specified,
they are executed in the order shown below.
--backup, -b
Make a backup of the selected volumes. At most one backup of a given volume will
be made per day.
--retire-device
Retire the named devices. Retiring a device only means deleting the records of it.
Files on the device itself are not touched.
If the device is still listed in the configuration file then you will be asked
whether you really want to retire it; you can suppress this check with the --force
option.
--retire
Retire the named hosts and volumes. Retiring a volume means deleting any available
backups for the volume and the records of them. Records corresponding to backups
on unavailable devices are not removed.
If you just want to remove backup records for retired volumes but want to keep the
backups, you should either manually remove the records (see SCHEMA below), or
rename it within the volume.
Since this command deletes backups, you will be prompted to confirm it. You can
suppress this check with the --force option.
--forget-only
With --retire, suppresses deletion of backups, and instead just drops database
records for the hosts and volumes affected.
--prune, -p
Prune old backups of selected volumes. See rsbackup(5) for details how how pruning
is controlled.
--prune-incomplete,-P
Prune incomplete backups of selected volumes. Any backups that failed before
completion will be removed.
--html PATH, -H PATH
Write an HTML report to PATH. The report covers all volumes, not just selected
ones. PATH can be - to write to standard output.
--text PATH, -T PATH
Write a plain text report to PATH. The report covers all volumes, not just
selected ones. PATH can be - to write to standard output.
--email ADDRESS, -e ADDRESS
Email a report to ADDRESS. The contents is equivalent to the output of --text and
--html.
--dump-config
Writes the parsed configuration file to standard output. Must not be combined with
any other action option.
With --verbose, the configuration file is annotated with descriptive comments.
General Options
--config PATH, -c PATH
The path to the configuration file. The default is /etc/rsbackup/config.
--store PATH, -s PATH
Specify the destination directory to back up to. Using this option (possibly more
than once) is equivalent to removing the store directives from the configuration
file and replacing them with the paths give in --store options.
This option implicitly enables the --warn-store option.
--unmounted-store PATH
Equivalent to --store except that the store does not have to be a mount point.
--verbose, -v
Enable verbose mode. Various messages will be displayed to report progress and the
rsync --quiet option is suppressed.
--dry-run, -n
Enable dry-run mode. Commands will be displayed but nothing will actually be done.
--force, -f
Suppress checks made when retiring devices and volumes.
--wait, -w
Waits rather than giving up if another copy of rsbackup is running.
--database, -D PATH
Override the path to the backup database.
--help, -h
Display a usage message.
--version, -V
Display the version number.
Report Verbosity
--logs VERBOSITY
Controls which logfiles for a given volume/device pair to include in the report.
The possible values of VERBOSITY are:
all Includes all nonempty logfiles, even if the backup succeeded.
errors Includes all error logfiles.
recent Includes only the most recent error logfile.
latest Includes only the latest logfile, even if the backup succeeded.
failed Includes only the most recent logfile but only if that attempt failed. This
is the default.
Warning Options
--warn-unknown
Display warnings for unknown devices, hosts and volumes. (Warnings will always be
included in the report, this refers to runtime error output.)
--warn-store
Display warnings for unsuitable store directories and unavailable devices.
--warn-unreachable
Display warnings for unreachable hosts.
--no-warn-partial
Suppress warnings for rsync "partial transfer" diagnostics (which are on by
default).
--warn-all, -W
Enable all --warn- options.
--no-errors
Suppress display of errors from rsync.
Volume Selection
The list of selectors on the command line determines what subset of the known volumes are
backed up, pruned or retired. The following selectors are possible:
HOST Select all volumes for the host.
HOST:VOLUME Select the volume.
-HOST Deselect all volumes for the host.
-HOST:VOLUME Deselect the volume.
* Select all volumes.
If no hosts or volumes are specified on the command line then all volumes are selected for
backing up or pruning. For retiring, you must explicitly select hosts or volumes to
retire and only positive selections are possible.
BACKUP LIFECYCLE
Adding A New Host
To add a new host create a host entry for it in the configuration file.
To back up the local host, specify hostname localhost. Otherwise you can usually omit
hostname.
You may want to set host-wide values for prune-parameter prune-age, max-age and
prune-parameter min-backups.
A host with no volumes has no effect.
Adding A New Volume
To add a new volume create a volume entry for it in the relevant host section of the
configuration file.
Add exclude options to skip files you don't want to back up. This might include temporary
files and the contents of "trash" directories.
If the volume contains mount points, and you want to back up the contents of the
subsiduary filesystems, then be sure to include the traverse option.
You may want to set per-volume values for prune-parameter prune-age, max-age and
prune-parameter min-backups.
Adding A New Device
To add a new device, format and mount it and create a device-id file in its top-level
directory. Add a device entry for it in the configuration file and a store entry
mentioning its usual mount point.
Under normal circumstances you should make sure that the backup filesystem is owned by
root and mode 0700.
Making Backups
To backup up all available volumes to all available devices:
rsbackup --backup
You will probably want to automate this. To only back up a limited set of volumes specify
selection arguments on the command line.
Pruning Backups
To prune old backups:
rsbackup --prune --prune-incomplete
You will probably want to automate this.
An "incomplete backup" occurs when a backup of a volume fails or is interrupted before
completion. They are not immediately deleted because rsync may be able to use the files
already transferred to save effort on subsequent backups on the same day, or (if there are
no complete backups to use for this purpose) later days.
Retiring A Host
Retiring a host means removing all backups for it. The suggested approach is to remove
configuration for it and then use rsbackup --retire HOST to remove its backups too. You
can do this the other way around but you will be prompted to check you really meant to
remove backups for a host still listed in the configuration file.
If any of the backups for the host are on a retired device you should retire that device
first.
Retiring A Volume
Retiring a volume means removing all backups for it. It is almost the same as retiring a
whole host but the command is rsbackup --retire HOST:VOLUME.
You can retire multiple hosts and volumes in a single command.
Retiring A Device
Retiring a device just means removing the records for it. Use rsbackup --retire-device
DEVICE to do this. The contents of the device are not modified; if you want that you must
do it manually.
You can retire multiple devices in a single command.
RESTORING
Restore costs extra l-)
Manual Restore
The backup has the same layout, permissions etc as the original system, so it's perfectly
possible to simply copy files from a backup directory to their proper location.
Be careful to get file ownership right. The backup is stored with the same numeric user
and group ID as the original system used.
Until a backup is completed, or while one is being pruned, a corresponding .incomplete
file will exist. Check for such a file before restoring any given backup.
Restoring With rsync
Supposing that host chymax has a volume called users in which user home directories are
backed up, and user rjk wants their entire home directory to be restored, an example
restore command might be:
rsync -aSHAXz --numeric-ids /store/chymax/users/2010-04-01/rjk/. chymax:~rjk/.
You could add the --delete option if you wanted to restore to exactly the status quo ante,
or at the opposite extreme --existing if you only wanted to restore files that had been
deleted.
You might prefer to rsync back into a staging area and then pick files out manually.
Restoring with tar
You could tar up a backup directory (or a subset of it) and then untar it on the target.
Remember to use the --numeric-owner option to tar.
STORE VALIDITY
A store may be in the following states:
available
The store can be used for a backup.
unavailable
The store cannot be used for a backup. Normally this does not generate an error
but --warn-store can be used to report warnings for all unavailable stores, and if
no store is available then the problems with the unavailable stores are described.
bad The store cannot be used for a backup. This always generates an error message, but
does not prevent backups to other stores taking place.
fatally broken
The store cannot be used for a backup. The program will be terminated.
The states are recognized using the following tests (in this order):
• If the store path does not exist, the store is bad.
• If the store does not have a device-id file then it is unavailable. If it has one
but reading it raises an error then it is bad.
• If the store's device-id file contains an unknown device name then it is bad.
• If the store's device-id file names the same device as some other store then it is
fatally broken.
• If the store is not owned by root then it is bad. This check can be overridden
with the public directive.
• If the store can be read or written by group or world then it is bad. This check
can be overridden with the public directive.
FILES
/etc/rsbackup/config
Configuration file. See rsbackup(5)
LOGS/backups.db
The backup records. See SCHEMA below.
STORE/HOST/VOLUME/YYYY-MM-DD
One backup for a volume.
STORE/HOST/VOLUME/YYYY-MM-DD.incomplete
Flag file for an incomplete backup.
SCHEMA
backups.db is a SQLite database. It contains a single table with the following
definition:
CREATE TABLE backup (
host TEXT,
volume TEXT,
device TEXT,
id TEXT,
time INTEGER,
pruned INTEGER,
rc INTEGER,
status INTEGER,
log BLOB,
PRIMARY KEY (host,volume,device,id)
)
Each row represents a completed backup. The meanings of the fields are as follows:
host The name of the host the backup was taken from.
volume The name of the volume the backup was taken from.
device The name of the device the backup was written to.
id The unique identifier for the backup. Currently this is the date the backup was
made, in the format YYYY-MM-DD but this may be changed in the future.
time The time that the backup was started, as a time_t.
pruned The time that backup pruning started (if it is underway) or finished (if it is
complete), as a time_t.
rc The exit status of the backup process. 0 means success.
status Status of this backup. See below.
log The log output of rsync(1) and hooks. If the backup status is pruning or pruned
(see below) then this contains the reason for the pruning.
Possible status values are:
0 Unknown status. Not normally seen.
1 Internally this means the backup is underway. If seen externally after rsbackup
terminates it means the backup is incomplete.
2 Backup is complete.
3 Backup has failed.
4 Pruning has started.
5 Pruning has completed.
rsbackup is not designed with concurrent access to this table in mind. Therefore it is
recommended that you only modify its contents when the program is not running.
HISTORICAL BEHAVIOR
Older versions of rsbackup stored the logs for each backup in a separate file. If such
files are encountered then rsbackup will automatically populate backups.db from them and
then delete them.
Older versions of rsbackup logged pruning information to a pruning logfile. These files
will be deleted at the same rate as records of pruned backups in the database. They are
not included in the report.
SEE ALSO
rsbackup-graph(1), rsbackup.cron(1), rsbackup-mount(1), rsbackup-snapshot-hook(1),
rsync(1), rsbackup(5)
AUTHOR
Richard Kettlewell <rjk@greenend.org.uk>
rsbackup(1)