NAME

       tmd710_tncsetup - tool to configure the TNC on several Kenwood radios

SYNOPSIS

       tmd710_tncsetup [options]

DESCRIPTION

       This manual page documents briefly the tmd710-tncsetup command.

OPTIONS

       These  programs  follow the usual GNU command line syntax, with long options starting with
       two dashes (`-').  A summary of options is included below.  You must supply at  least  two
       arguments: the band (0 for Band A, 1 for Band B) and the serial port

       -B, --band
              the frequency band to use (0 for Band A or 1 for Band B)

       -S, --serialport
              the serial port to use for communication with the operation panel

       -b, --baudrate
              sets the HBAUD parameter (TNC speed, 1200 or 9600 baud)

       -m, --maxframe
              sets the MAXFRAME parameter (1-7)

       -p, --paclen
              sets the PACLEN parameter (0-255)

       -d, --txdelay
              sets the TXDELAY parameter (0-120)

       -s, --software-flow
              configure the TNC for software flow-control

       -h, --hardware-flow
              configure the TNC for hardware flow-control

       -c, --callsign
              configure the callsign

       -i     Initialize  TNC  (default  is into Packet KISS mode) 1 : TNC off 2 : Packet command
              mode only

       -V, --version
              display the version

AUTHOR

       Written by Francois Marier <va7gpl@fmarier.org>

       Project Homepage: https://github.com/fmarier/tmd710_tncsetup

                                            3 Jan 2021                         tmd710_tncsetup(1)