Ubuntu Manpage: wofi - configuration file and styling

NAME

       wofi - configuration file and styling

DESCRIPTION

       Wofi's  configuration  format is very simple, consisting of key value pairs in snake case.
       The majority of the config options are the command line options, there are however a small
       handful of options only accessible via wofi's config.

       Mode specific options for the built-in modes are documented in wofi(7). They are placed in
       the config file in the format mode-example_opt=val. For example dmenu has an option called
       parse_action which would be placed in the config as dmenu-parse_action=true.

       Anything  following  a  # is considered to be a comment unless the # is prefixed with a \.
       For this reason in order to put a backslash in the config  it  must  be  escaped  as  well
       giving \\.

CONFIG OPTIONS

Most of the options here are the command flags as found in wofi(1) in snake case, however
some are unique to the config.

style=PATH
Specifies the CSS file to use as the stylesheet.

stylesheet=PATH
Specifies the CSS file to use as the stylesheet. This option is NOT the same as
style. Absolute paths are absolute however relative paths are relative to the wofi
config folder location $XDG_CONFIG_HOME/wofi and NOT the current working directory
as they are with style. They are also NOT relative to the path as specified by
--conf. This option comes from rootbar and is probably more confusing than it's
worth. You should probably use style unless you're sure this is what you want.

color=PATH
Specifies the colors file to use.

colors=PATH
Specifies the colors file to use. This option is NOT the same as color. Absolute
paths are absolute however relative paths are relative to the wofi config folder
location $XDG_CONFIG_HOME/wofi and NOT the current working directory as they are
with color. They are also NOT relative to the path as specified by --conf. This
option comes from rootbar and is probably more confusing than it's worth. You
should probably use color unless you're sure this is what you want.

show=MODE
Specifies the mode to run in. A list of modes can be found in wofi(7).

mode=MODE
Identical to show.

width=WIDTH
Specifies the menu width in pixels or percent of screen size, default is 50%.
Pixels are used unless the number ends with a %.

height=HEIGHT
Specifies the menu height in pixels or percent of screen size, default is 40%.
Pixels are used unless the number ends with a %.

prompt=PROMPT
Sets the prompt to be display in the search box, default is the name of the mode.

xoffset=OFFSET
Sets the x offset from the location in pixels, default is 0.

x=OFFSET
Identical to xoffset.

yoffset=OFFSET
Sets the y offset from the location in pixels, default is 0.

y=OFFSET
Identical to yoffset.

normal_window=BOOL
If true runs wofi in a normal window instead of using wlr-layer-shell, default is
false.

allow_images=BOOL
If true allows image escape sequences to be processed and rendered, default is
false.

allow_markup=BOOL
If true allows pango markup to be processed and rendered, default is false.

cache_file=PATH
Specifies the cache file to load/store cache, default is $XDG_CACHE_HOME/wofi-<mode
name> where <mode name> is the name of the mode, if $XDG_CACHE_HOME is not
specified ~/.cache is used.

term=TERM
Specifies the term to use when running a program in a terminal. This overrides the
default terminal run order which is kitty, termite, gnome-terminal, weston-terminal
in that order.

password=CHARACTER
Runs wofi in password mode using the specified character, default is false.

exec_search=BOOL
If true activiating a search with enter will execute the search not the first
result, default is false.

hide_scroll=BOOL
If true hides the scroll bars, default is false.

matching=MODE
Specifies the matching mode, it can be either contains or fuzzy, default is
contains.

insensitive=BOOL
If true enables case insensitive search, default is false.

parse_search=BOOL
If true parses out image escapes and pango preventing them from being used for
searching, default is false.

location=LOCATION
Specifies the location. See wofi(7) for more information, default is center.

no_actions=BOOL
If true disables multiple actions for modes that support it, default is false.

lines=LINES
Specifies the height in number of lines instead of pixels.

columns=COLUMNS
Specifies the number of columns to display, default is 1.

sort_order=ORDER
Specifies the default sort order. There are currently two orders, default and
alphabetical. See wofi(7) for details.

gtk_dark=BOOL
If true, instructs wofi to use the dark variant of the current GTK theme (if
available). Default is false.

search=STRING
Specifies something to search for immediately on opening

monitor=STRING
Sets the monitor to open on

orientation=ORIENTATION
Specifies the orientation, it can be either horizontal or vertical, default is
vertical.

halign=ALIGN
Specifies the horizontal align for the entire scrolled area, it can be any of fill,
start, end, or center, default is fill.

content_halign=ALIGN
Specifies the horizontal align for the individual entries, it can be any of fill,
start, end, or center, default is fill.

valign=ALIGN
Specifies the vertical align for the entire scrolled area, it can be any of fill,
start, end, or center, the default is orientation dependent. If vertical then it
defaults to start, if horizontal it defaults to center.

filter_rate=RATE
Specifies the rate at which search results are updated in milliseconds, default is
100.

image_size=SIZE
Specifies the size of images in pixels when images are enabled, default is 32.

key_up=KEY
Specifies the key to use in order to move up. Default is Up(Up arrow). See
wofi-keys(7) for the key codes.

key_down=KEY
Specifies the key to use in order to move down. Default is Down(Down arrow). See
wofi-keys(7) for the key codes.

key_left=KEY
Specifies the key to use in order to move left. Default is Left(Left arrow). See
wofi-keys(7) for the key codes.

key_right=KEY
Specifies the key to use in order to move right. Default is Right(Right arrow). See
wofi-keys(7) for the key codes.

key_forward=KEY
Specifies the key to use in order to move forward. Default is Tab. See wofi-keys(7)
for the key codes.

key_backward=KEY
Specifies the key to use in order to move backward. Default is
ISO_Left_Tab(Shift+Tab). See wofi-keys(7) for the key codes.

key_submit=KEY
Specifies the key to use in order to submit an action. Default is Return. See
wofi-keys(7) for the key codes.

key_exit=KEY
Specifies the key to use in order to exit wofi. Default is Escape. See wofi-keys(7)
for the key codes.

key_pgup=KEY
Specifies the key to use in order to move one page up. Default is Page_Up. See
wofi-keys(7) for the key codes.

key_pgdn=KEY
Specifies the key to use in order to move one page down. Default is Page_Down. See
wofi-keys(7) for the key codes.

key_expand=KEY
Specifies the key to use in order to expand/contract multi-action entires. There is
no default. See wofi-keys(7) for the key codes.

key_hide_search=KEY
Specifies the key to use in order to hide/show the search bar. There is no default.
See wofi-keys(7) for the key codes.

line_wrap=MODE
Specifies the line wrap mode to use. The options are off, word, char, and
word_char. Default is off.

global_coords=BOOL
Specifies whether x and y offsets should be calculated using the global compositor
space instead of the current monitor. Default is false. This does not play well
with locations and using it with them is not advised.

hide_search=BOOL
Specifies whether the search bar should be hidden. Default is false.

dynamic_lines=BOOL
Specifies whether wofi should be dynamically shrunk to fit the number of visible
lines or if it should always stay the same size. Default is false.

layer=LAYER
Specifies the layer to open on. The options are background, bottom, top, and
overlay. Default is top

CSS SELECTORS

Any GTK widget can be selected by using the name of its CSS node, these however might
change with updates and are not guaranteed to stay constant. Wofi also provides certain
widgets with names and classes which can be referenced from CSS to give access to the most
important widgets easily. wofi(7) contains the current widget layout used by wofi so if
you want to get into CSS directly using GTK widget names look there for info.

#window
The name of the window itself.

#outer-box
The name of the box that contains everything.

#input
The name of the search bar.

#scroll
The name of the scrolled window containing all of the entries.

#inner-box
The name of the box containing all of the entries.

#img
The name of all images in entries displayed in image mode.

#text
The name of all the text in entries.

#unselected
The name of all entries currently unselected. A better way of doing this is to do
#entry and combine that with #entry:selected

#selected
The name of all entries currently selected. A better way of doing this is to do
#entry:selected

.entry
The class attached to all entries. This is attached to the inside property box and
is old, you probably want #entry instead

#entry
The name of all entries.

COLORS

       The  colors file should be formatted as new line separated hex values. These values should
       be in the standard HTML format and begin with a hash. These colors will be loaded  however
       wofi  doesn't know what color should be used for what so you must reference them from your
       CSS.

       You can reference these from your CSS by doing  --wofi-color<n>  where  <n>  is  the  line
       number - 1. For example to reference the color on line 1 you would do --wofi-color0.

       The  colors  can  also  be  referenced  by doing --wofi-rgb-color<n> where <n> is the line
       number - 1. The difference between these is the format used to replace the macro.

       --wofi-color<n>  is  replaced  with  an  HTML  color   code   in   the   format   #FFFFFF.
       --wofi-rgb-color<n>  is  replaced  with comma separated rgb values in the format 255, 255,
       255. The correct usage of --wofi-rgb-color<n> is to wrap it in rgb() or rgba(). Note  that
       it  does  not  return  an  alpha  value so combining it with rgba() should be done like so
       rgba(--wofi-rgb-color0, 0.8). This would set the color to line 1 with an opacity of 80%.

                                                                                          wofi(5)