Ubuntu Manpage: apt-ftparchive - Utility to generate index files

NAME

       apt-ftparchive - Utility to generate index files

SYNOPSIS

       apt-ftparchive [-dsq] [--md5] [--delink] [--readonly] [--contents] [--arch architecture]
                      [-o=config_string] [-c=config_file]
                      {packages path... [override-file [pathprefix]]  |
                      sources path... [override-file [pathprefix]]  | contents path  |
                      release path  | generate config_file section...  | clean config_file  |
                      {-v | --version} | {-h | --help}}

DESCRIPTION

apt-ftparchive is the command line tool that generates the index files that APT uses to
access a distribution source. The index files should be generated on the origin site based
on the content of that site.

apt-ftparchive is a superset of the dpkg-scanpackages(1) program, incorporating its entire
functionality via the packages command. It also contains a contents file generator,
contents, and an elaborate means to 'script' the generation process for a complete
archive.

Internally apt-ftparchive can make use of binary databases to cache the contents of a .deb
file and it does not rely on any external programs aside from gzip(1). When doing a full
generate it automatically performs file-change checks and builds the desired compressed
output files.

Unless the -h, or --help option is given, one of the commands below must be present.

packages
The packages command generates a package file from a directory tree. It takes the
given directory and recursively searches it for .deb files, emitting a package record
to stdout for each. This command is approximately equivalent to dpkg-scanpackages(1).

The option --db can be used to specify a binary caching DB.

sources
The sources command generates a source index file from a directory tree. It takes the
given directory and recursively searches it for .dsc files, emitting a source record
to stdout for each. This command is approximately equivalent to dpkg-scansources(1).

If an override file is specified then a source override file will be looked for with
an extension of .src. The --source-override option can be used to change the source
override file that will be used.

contents
The contents command generates a contents file from a directory tree. It takes the
given directory and recursively searches it for .deb files, and reads the file list
from each file. It then sorts and writes to stdout the list of files matched to
packages. Directories are not written to the output. If multiple packages own the same
file then each package is separated by a comma in the output.

The option --db can be used to specify a binary caching DB.

release
The release command generates a Release file from a directory tree. It recursively
searches the given directory for uncompressed and compressed Packages, Sources,
Contents, Components and icons files as well as Release, Index and md5sum.txt files by
default (APT::FTPArchive::Release::Default-Patterns). Additional filename patterns can
be added by listing them in APT::FTPArchive::Release::Patterns. It then writes to
stdout a Release file containing (by default) an MD5, SHA1, SHA256 and SHA512 digest
for each file.

Values for the additional metadata fields in the Release file are taken from the
corresponding variables under APT::FTPArchive::Release, e.g.
APT::FTPArchive::Release::Origin. The supported fields are Origin, Label, Suite,
Version, Codename, Date, NotAutomatic, ButAutomaticUpgrades, Acquire-By-Hash,
Valid-Until, Signed-By, Architectures, Components and Description.

generate
The generate command is designed to be runnable from a cron script and builds indexes
according to the given config file. The config language provides a flexible means of
specifying which index files are built from which directories, as well as providing a
simple means of maintaining the required settings.

clean
The clean command tidies the databases used by the given configuration file by
removing any records that are no longer necessary.

THE GENERATE CONFIGURATION

The generate command uses a configuration file to describe the archives that are going to
be generated. It follows the typical ISC configuration format as seen in ISC tools like
bind 8 and dhcpd. apt.conf(5) contains a description of the syntax. Note that the
generate configuration is parsed in sectional manner, but apt.conf(5) is parsed in a tree
manner. This only effects how the scope tag is handled.

The generate configuration has four separate sections, each described below.

Dir Section
The Dir section defines the standard directories needed to locate the files required
during the generation process. These directories are prepended certain relative paths
defined in later sections to produce a complete an absolute path.

ArchiveDir
Specifies the root of the FTP archive, in a standard Debian configuration this is the
directory that contains the ls-LR and dist nodes.

OverrideDir
Specifies the location of the override files.

CacheDir
Specifies the location of the cache files.

FileListDir
Specifies the location of the file list files, if the FileList setting is used below.

Default Section
The Default section specifies default values, and settings that control the operation of
the generator. Other sections may override these defaults with a per-section setting.

Packages::Compress
Sets the default compression schemes to use for the package index files. It is a
string that contains a space separated list of at least one of the compressors
configured via the APT::Compressor configuration scope. The default for all
compression schemes is '. gzip'.

Packages::Extensions
Sets the default list of file extensions that are package files. This defaults to
'.deb'.

Sources::Compress
This is similar to Packages::Compress except that it controls the compression for the
Sources files.

Sources::Extensions
Sets the default list of file extensions that are source files. This defaults to
'.dsc'.

Contents::Compress
This is similar to Packages::Compress except that it controls the compression for the
Contents files.

Translation::Compress
This is similar to Packages::Compress except that it controls the compression for the
Translation-en master file.

DeLinkLimit
Specifies the number of kilobytes to delink (and replace with hard links) per run.
This is used in conjunction with the per-section External-Links setting.

FileMode
Specifies the mode of all created index files. It defaults to 0644. All index files
are set to this mode with no regard to the umask.

LongDescription
Specifies whether long descriptions should be included in the Packages file or split
out into a master Translation-en file.

TreeDefault Section
Sets defaults specific to Tree sections. All of these variables are substitution variables
and have the strings $(DIST), $(SECTION) and $(ARCH) replaced with their respective
values.

MaxContentsChange
Sets the number of kilobytes of contents files that are generated each day. The
contents files are round-robined so that over several days they will all be rebuilt.

ContentsAge
Controls the number of days a contents file is allowed to be checked without changing.
If this limit is passed the mtime of the contents file is updated. This case can occur
if the package file is changed in such a way that does not result in a new contents
file [override edit for instance]. A hold off is allowed in hopes that new .debs will
be installed, requiring a new file anyhow. The default is 10, the units are in days.

Directory
Sets the top of the .deb directory tree. Defaults to
$(DIST)/$(SECTION)/binary-$(ARCH)/

SrcDirectory
Sets the top of the source package directory tree. Defaults to
$(DIST)/$(SECTION)/source/

Packages
Sets the output Packages file. Defaults to $(DIST)/$(SECTION)/binary-$(ARCH)/Packages

Sources
Sets the output Sources file. Defaults to $(DIST)/$(SECTION)/source/Sources

Translation
Sets the output Translation-en master file with the long descriptions if they should
be not included in the Packages file. Defaults to
$(DIST)/$(SECTION)/i18n/Translation-en

InternalPrefix
Sets the path prefix that causes a symlink to be considered an internal link instead
of an external link. Defaults to $(DIST)/$(SECTION)/

Contents
Sets the output Contents file. Defaults to $(DIST)/$(SECTION)/Contents-$(ARCH). If
this setting causes multiple Packages files to map onto a single Contents file (as is
the default) then apt-ftparchive will integrate those package files together
automatically.

Contents::Header
Sets header file to prepend to the contents output.

BinCacheDB
Sets the binary cache database to use for this section. Multiple sections can share
the same database.

FileList
Specifies that instead of walking the directory tree, apt-ftparchive should read the
list of files from the given file. Relative files names are prefixed with the archive
directory.

SourceFileList
Specifies that instead of walking the directory tree, apt-ftparchive should read the
list of files from the given file. Relative files names are prefixed with the archive
directory. This is used when processing source indexes.

Tree Section
The Tree section defines a standard Debian file tree which consists of a base directory,
then multiple sections in that base directory and finally multiple Architectures in each
section. The exact pathing used is defined by the Directory substitution variable.

The Tree section takes a scope tag which sets the $(DIST) variable and defines the root of
the tree (the path is prefixed by ArchiveDir). Typically this is a setting such as
dists/bullseye.

All of the settings defined in the TreeDefault section can be used in a Tree section as
well as three new variables.

When processing a Tree section apt-ftparchive performs an operation similar to:

for i in Sections do
for j in Architectures do
Generate for DIST=scope SECTION=i ARCH=j

Sections
This is a space separated list of sections which appear under the distribution;
typically this is something like main contrib non-free

Architectures
This is a space separated list of all the architectures that appear under search
section. The special architecture 'source' is used to indicate that this tree has a
source archive. The architecture 'all' signals that architecture specific files like
Packages should not include information about architecture all packages in all files
as they will be available in a dedicated file.

LongDescription
Specifies whether long descriptions should be included in the Packages file or split
out into a master Translation-en file.

BinOverride
Sets the binary override file. The override file contains section, priority and
maintainer address information.

SrcOverride
Sets the source override file. The override file contains section information.

ExtraOverride
Sets the binary extra override file.

SrcExtraOverride
Sets the source extra override file.

BinDirectory Section
The bindirectory section defines a binary directory tree with no special structure. The
scope tag specifies the location of the binary directory and the settings are similar to
the Tree section with no substitution variables or SectionArchitecture settings.

Packages
Sets the Packages file output.

Sources
Sets the Sources file output. At least one of Packages or Sources is required.

Contents
Sets the Contents file output (optional).

BinOverride
Sets the binary override file.

SrcOverride
Sets the source override file.

ExtraOverride
Sets the binary extra override file.

SrcExtraOverride
Sets the source extra override file.

BinCacheDB
Sets the cache DB.

PathPrefix
Appends a path to all the output paths.

FileList, SourceFileList
Specifies the file list file.

THE BINARY OVERRIDE FILE

       The binary override file is fully compatible with dpkg-scanpackages(1). It contains four
       fields separated by spaces. The first field is the package name, the second is the
       priority to force that package to, the third is the section to force that package to and
       the final field is the maintainer permutation field.

       The general form of the maintainer field is:

           old [// oldn]* => new

       or simply,

           new

       The first form allows a double-slash separated list of old email addresses to be
       specified. If any of those are found then new is substituted for the maintainer field. The
       second form unconditionally substitutes the maintainer field.

THE SOURCE OVERRIDE FILE

       The source override file is fully compatible with dpkg-scansources(1). It contains two
       fields separated by spaces. The first field is the source package name, the second is the
       section to assign it.

THE EXTRA OVERRIDE FILE

       The extra override file allows any arbitrary tag to be added or replaced in the output. It
       has three columns, the first is the package, the second is the tag and the remainder of
       the line is the new value.

OPTIONS

All command line options may be set using the configuration file, the descriptions
indicate the configuration option to set. For boolean options you can override the config
file by using something like -f-,--no-f, -f=no or several other variations.

--md5, --sha1, --sha256, --sha512
Generate the given checksum. These options default to on, when turned off the
generated index files will not have the checksum fields where possible. Configuration
Items: APT::FTPArchive::Checksum and APT::FTPArchive::Index::Checksum where Index can
be Packages, Sources or Release and Checksum can be MD5, SHA1, SHA256 or SHA512.

-d, --db
Use a binary caching DB. This has no effect on the generate command. Configuration
Item: APT::FTPArchive::DB.

-q, --quiet
Quiet; produces output suitable for logging, omitting progress indicators. More q's
will produce more quiet up to a maximum of 2. You can also use -q=# to set the quiet
level, overriding the configuration file. Configuration Item: quiet.

--delink
Perform Delinking. If the External-Links setting is used then this option actually
enables delinking of the files. It defaults to on and can be turned off with
--no-delink. Configuration Item: APT::FTPArchive::DeLinkAct.

--contents
Perform contents generation. When this option is set and package indexes are being
generated with a cache DB then the file listing will also be extracted and stored in
the DB for later use. When using the generate command this option also allows the
creation of any Contents files. The default is on. Configuration Item:
APT::FTPArchive::Contents.

-s, --source-override
Select the source override file to use with the sources command. Configuration Item:
APT::FTPArchive::SourceOverride.

--readonly
Make the caching databases read only. Configuration Item: APT::FTPArchive::ReadOnlyDB.

-a, --arch
Accept in the packages and contents commands only package files matching *_arch.deb or
*_all.deb instead of all package files in the given path. Configuration Item:
APT::FTPArchive::Architecture.

APT::FTPArchive::AlwaysStat
apt-ftparchive(1) caches as much as possible of metadata in a cachedb. If packages are
recompiled and/or republished with the same version again, this will lead to problems
as the now outdated cached metadata like size and checksums will be used. With this
option enabled this will no longer happen as it will be checked if the file was
changed. Note that this option is set to "false" by default as it is not recommend to
upload multiple versions/builds of a package with the same version number, so in
theory nobody will have these problems and therefore all these extra checks are
useless.

APT::FTPArchive::LongDescription
This configuration option defaults to "true" and should only be set to "false" if the
Archive generated with apt-ftparchive(1) also provides Translation files. Note that
the Translation-en master file can only be created in the generate command.

-h, --help
Show a short usage summary.

-v, --version
Show the program version.

-c, --config-file
Configuration File; Specify a configuration file to use. The program will read the
default configuration file and then this configuration file. If configuration settings
need to be set before the default configuration files are parsed specify a file with
the APT_CONFIG environment variable. See apt.conf(5) for syntax information.

-o, --option
Set a Configuration Option; This will set an arbitrary configuration option. The
syntax is -o Foo::Bar=bar. -o and --option can be used multiple times to set
different options.

EXAMPLES

       To create a compressed Packages file for a directory containing binary packages (.deb):

           apt-ftparchive packages directory | gzip > Packages.gz

DIAGNOSTICS

       apt-ftparchive returns zero on normal operation, decimal 100 on error.

BUGS

       APT bug page[1]. If you wish to report a bug in APT, please see
       /usr/share/doc/debian/bug-reporting.txt or the reportbug(1) command.

AUTHORS

       Jason Gunthorpe

       APT team

NOTES

        1. APT bug page
           http://bugs.debian.org/src:apt