Provided by: bluez_5.65-0ubuntu1_amd64 
NAME
hciconfig - Configure Bluetooth devices
SYNOPSIS
hciconfig -h
hciconfig [-a]
hciconfig [-a] hciX [COMMAND [PARAMETERS]]
DESCRIPTION
hciconfig(1) is used to configure Bluetooth devices. hciX is the name of a Bluetooth
device installed in the system. If hciX is not given, hciconfig prints name and basic
information about all the Bluetooth devices installed in the system.
If hciX is given but no command is given, it prints basic information on device hciX only.
Basic information is interface type, BD address, ACL MTU, SCO MTU, flags (up, init,
running, raw, page scan enabled, inquiry scan enabled, inquiry, authentication enabled,
encryption enabled).
OPTIONS
-a, --all
Print features, packet type, link policy, link mode, class, Version other than the
basic info.
-h, --help
Show help options
COMMANDS
up Open and initialize HCI device.
down Close HCI device.
reset Reset HCI device.
rstat Reset statistic counters.
auth Enable authentication (sets device to security mode 3).
noauth Disable authentication.
encrypt
Enable encryption (sets device to security mode 3).
noencrypt
Disable encryption.
secmgr Enable security manager (current kernel support is limited).
nosecmgr
Disable security manager.
piscan Enable page and inquiry scan.
noscan Disable page and inquiry scan.
iscan Enable inquiry scan, disable page scan.
pscan Enable page scan, disable inquiry scan.
ptype [type]
With no type , displays the current packet types. Otherwise, all the packet types
specified by type are set. type is a comma-separated list of packet types, where
the possible packet types are DM1, DM3, DM5, DH1, DH3, DH5, HV1, HV2, HV3.
name [name]
With no name, prints local name. Otherwise, sets local name to name.
class [class]
With no class, prints class of device. Otherwise, sets class of device to class.
class is a 24-bit hex number describing the class of device, as specified in
section 1.2 of the Bluetooth Assigned Numers document.
voice [voice]
With no voice, prints voice setting. Otherwise, sets voice setting to voice. voice
is a 16-bit hex number describing the voice setting.
iac [iac]
With no iac, prints the current IAC setting. Otherwise, sets the IAC to iac.
inqtpl [level]
With no level, prints out the current inquiry transmit power level. Otherwise,
sets inquiry transmit power level to level.
inqmode [mode]
With no mode, prints out the current inquiry mode. Otherwise, sets inquiry mode
to mode.
┌─────┬──────────────────────────────────┐
│mode │ Description │
├─────┼──────────────────────────────────┤
│0 │ Standard Inquiry │
├─────┼──────────────────────────────────┤
│1 │ Inquiry with RSSI │
├─────┼──────────────────────────────────┤
│2 │ Inquiry with RSSI or Extended │
│ │ Inquiry │
└─────┴──────────────────────────────────┘
inqdata [data]
With no data, prints out the current inquiry data. Otherwise, sets inquiry data to
data.
inqtype [type]
With no type, prints out the current inquiry scan type. Otherwise, sets inquiry
scan type to type.
inqparams [win:int]
With no win:int, prints inquiry scan window and interval. Otherwise, sets inquiry
scan window to win slots and inquiry scan interval to int slots.
pageparms [win:int]
With no win:int, prints page scan window and interval. Otherwise, sets page scan
window to win slots and page scan interval to int slots.
pageto [to]
With no to, prints page timeout. Otherwise, sets page timeout to to slots.
afhmode [mode]
With no mode, prints out the current AFH mode. Otherwise, sets AFH mode to mode.
┌─────┬─────────────┐
│mode │ Description │
├─────┼─────────────┤
│0 │ Enable │
├─────┼─────────────┤
│1 │ Disable │
└─────┴─────────────┘
sspmode [mode]
With no mode, prints out the current Simple Pairing mode. Otherwise, sets Simple
Pairing mode to mode.
┌─────┬─────────────┐
│mode │ Description │
├─────┼─────────────┤
│0 │ Enable │
├─────┼─────────────┤
│1 │ Disable │
└─────┴─────────────┘
aclmtu mtu:pkt
Sets ACL MTU to mtu bytes and ACL buffer size to pkt packets.
scomtu mtu:pkt
Sets SCO MTU to mtu bytes and SCO buffer size to pkt packets.
delkey <bdaddr>
This command deletes the stored link key for bdaddr from the device.
oobdata
Get local OOB data (invalidates previously read data).
commands
Display supported commands.
features
Display device features.
version
Display version information.
revision
Display revision information.
lm [mode]
With no mode, prints link mode. CENTRAL or PERIPHERAL mean, respectively, to ask to
become central or to remain peripheral when a connection request comes in. The
additional keyword ACCEPT means that baseband connections will be accepted even if
there are no listening AF_BLUETOOTH sockets. mode is NONE or a comma-separated list
of keywords, where possible keywords are CENTRAL and ACCEPT. NONE sets link policy
to the default behaviour of remaining peripheral and not accepting baseband
connections when there are no listening AF_BLUETOOTH sockets. If CENTRAL is
present, the device will ask to become central if a connection request comes in. If
ACCEPT is present, the device will accept baseband connections even when there are
no listening AF_BLUETOOTH sockets.
block <bdaddr>
Add a device to the reject list
unblock <bdaddr>
Remove a device from the reject list
lerandaddr <bdaddr>
Set LE Random Address
leadv [type]
Enable LE Advertising.
┌─────┬──────────────────────────────────┐
│type │ Description │
├─────┼──────────────────────────────────┤
│0 │ Connectable undirected │
│ │ advertising (default) │
├─────┼──────────────────────────────────┤
│3 │ Non connectable undirected │
│ │ advertising │
└─────┴──────────────────────────────────┘
noleadv
Disable LE Advertising
lestates
Display the supported LE states
RESOURCES
http://www.bluez.org
REPORTING BUGS
linux-bluetooth@vger.kernel.org
AUTHOR
Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>, Fabrizio
Gennari <fabrizio.gennari@philips.com>
COPYRIGHT
Free use of this software is granted under ther terms of the GNU Lesser General Public
Licenses (LGPL).