Provided by: texlive-bibtex-extra_2022.20220722-2_all 
NAME
ltx2crossrefxml.pl - create XML files for submitting to crossref.org
SYNOPSIS
ltx2crossrefxml [-c config_file] [-o output_file] [-input-is-xml]
latex_file1 latex_file2 ...
OPTIONS
-c config_file
Configuration file. If this file is absent, defaults are used. See below for its
format.
-o output_file
Output file. If this option is not used, the XML is output to stdout.
-rpi-is-xml
Do not transform author and title input strings, assume they are valid XML.
The usual "--help" and "--version" options are also supported. Options can begin with
either "-" or "--", and ordered arbitrarily.
DESCRIPTION
For each given latex_file, this script reads ".rpi" and (if they exist) ".bbl" files and
outputs corresponding XML that can be uploaded to Crossref (<https://crossref.org>). Any
extension of latex_file is ignored, and latex_file itself is not read (and need not even
exist).
Each ".rpi" file specifies the metadata for a single article to be uploaded to Crossref (a
"journal_article" element in their schema); an example is below. These files are output by
the "resphilosophica" package (<https://ctan.org/pkg/resphilosophica>), but (as always)
can also be created by hand or by whatever other method you implement.
Any ".bbl" files present are used for the citation information in the output XML. See the
CITATIONS section below.
Unless "--rpi-is-xml" is specified, for all text (authors, title, citations), standard TeX
control sequences are replaced with plain text or UTF-8 or eliminated, as appropriate. The
"LaTeX::ToUnicode::convert" routine is used for this
(<https://ctan.org/pkg/bibtexperllibs>). Tricky TeX control sequences will almost surely
not be handled correctly. If "--rpi-is-xml" is given, the author and title strings from
the rpi files are output as-is, assuming they are valid XML; no checking is done. Citation
text from ".bbl" files is always converted from LaTeX to plain text.
This script just writes an XML file. It's up to you to actually do the uploading to
Crossref; for example, you can use their Java tool "crossref-upload-tool.jar"
(<https://www.crossref.org/education/member-setup/direct-deposit-xml/https-post>). For
the definition of their schema, see
<https://data.crossref.org/reports/help/schema_doc/4.4.2/index.html> (this is the schema
version currently followed by this script).
CONFIGURATION FILE FORMAT
The configuration file is read as Perl code. Thus, comment lines starting with "#" and
blank lines are ignored. The other lines are typically assignments in the form (spaces are
optional):
$variable = value ;
Usually the value is a "string" enclosed in ASCII double-quote or single-quote characters,
per Perl syntax. The idea is to specify the user-specific and journal-specific values
needed for the Crossref upload. The variables which are used are these:
$depositorName = "Depositor Name";
$depositorEmail = 'depositor@example.org';
$registrant = 'Registrant'; # organization name
$fullTitle = "FULL TITLE"; # journal name
$issn = "1234-5678"; # required
$abbrevTitle = "ABBR. TTL."; # optional
$coden = "CODEN"; # optional
For a given run, all ".rpi" data read is assumed to belong to the journal that is
specified in the configuration file. More precisely, the configuration data is written as
a "journal_metadata" element, with given "full_title", "issn", etc., and then each ".rpi"
is written as "journal_issue" plus "journal_article" elements.
The configuration file can also define one Perl function: "LaTeX_ToUnicode_convert_hook".
If it is defined, it is called at the beginning of the procedure that converts LaTeX text
to Unicode, which is done with the LaTeX::ToUnicode module, from the "bibtexperllibs"
package (<https://ctan.org/pkg/bibtexperllibs>). The function must accept one string (the
LaTeX text), and return one string (presumably the transformed string). The standard
conversions are then applied to the returned string, so the configured function need only
handle special cases, such as control sequences particular to the journal at hand.
RPI FILE FORMAT
Here's the (relevant part of the) ".rpi" file corresponding to the "rpsample.tex" example
in the "resphilosophica" package (<https://ctan.org/pkg/resphilosophica>):
%authors=Boris Veytsman\and A. U. Th{\o }r\and C. O. R\"espondent
%title=A Sample Paper:\\ \emph {A Template}
%year=2012
%volume=90
%issue=1--2
%startpage=1
%endpage=1
%doi=10.11612/resphil.A31245
%paperUrl=http://borisv.lk.net/paper12
%publicationType=full_text
Other lines, some not beginning with %, are ignored (and not shown). For more details on
processing, see the code.
The %paperUrl value is what will be associated with the given %doi (output as the
"resource" element). Crossref strongly recommends that the url be for a so-called landing
page, and not directly for a pdf
(<https://www.crossref.org/education/member-setup/creating-a-landing-page/>). Special
case: if the url is not specified, and the journal is Res Philosophica, a special-purpose
search url using pdcnet.org is returned. Any other journal must always specify this.
The %authors field is split at "\and" (ignoring whitespace before and after), and output
as the "contributors" element, using "sequence="first"" for the first listed,
"sequence="additional"" for the remainder.
If the %publicationType is not specified, it defaults to "full_text", since that has
historically been the case; "full_text" can also be given explicitly. The other values
allowed by the Crossref schema are "abstract_only" and "bibliographic_record". Finally, if
the value is "omit", the "publication_type" attribute is omitted entirely from the given
"journal_article" element.
Each ".rpi" must contain information for only one article, but multiple files can be read
in a single run. It would not be difficult to support multiple articles in a single ".rpi"
file, but it makes debugging and error correction easier when each uploaded XML contains a
single article.
MORE ABOUT AUTHOR NAMES
The three formats for names recognized are (not coincidentally) the same as BibTeX:
First von Last
von Last, First
von Last, Jr., First
The forms can be freely intermixed within a single %authors line, separated with "\and"
(including the backslash). Commas as name separators are not supported, unlike BibTeX.
In short, you may almost always use the first form; you shouldn't if either there's a Jr
part, or the Last part has multiple tokens but there's no von part. See the "btxdoc"
(``BibTeXing'' by Oren Patashnik) document for details.
In the %authors line of a ".rpi" file, some secondary directives are recognized, indicated
by "|" characters. Easiest to explain with an example:
%authors=|organization|\LaTeX\ Project Team \and Alex Brown|orcid=123
Thus: 1) if "|organization|" is specified, the author name will be output as an
"organization" contributor, instead of the usual "person_name", as the Crossref schema
requires.
2) If "|orcid=value|" is specified, the value is output as an "ORCID" element for that
"person_name".
These two directives, "|organization"| and "|orcid|" are mutually exclusive, because
that's how the Crossref schema defines them. The "=" sign after "orcid" is required, while
all spaces after the "orcid" keyword are ignored. Other than that, the ORCID value is
output literally. (E.g., the ORCID value of 123 above is clearly invalid, but it would be
output anyway, with no warning.)
Extra "|" characters, at the beginning or end of the entire %authors string, or doubled in
the middle, are accepted and ignored. Whitespace is ignored around all "|" characters.
CITATIONS
Each ".bbl" file corresponding to an input ".rpi" file is read and used to output a
"citation_list" element for that "journal_article" in the output XML. If no ".bbl" file
exists for a given ".rpi", no "citation_list" is output for that article.
The ".bbl" processing is rudimentary: only so-called "unstructured_citation" references
are produced for Crossref, that is, the contents of the citation (each paragraph in the
".bbl") is dumped as a single flat string without markup.
Bibliography text is unconditionally converted from TeX to XML, via the method described
above. It is not unusual for the conversion to be incomplete or incorrect. It is up to
you to check for this; e.g., if any backslashes remain in the output, it is most likely an
error.
Furthermore, it is assumed that the ".bbl" file contains a sequence of references, each
starting with "\bibitem{KEY}" (which itself must be at the beginning of a line, preceded
only by whitespace), and the whole bibliography ending with "\end{thebibliography}"
(similarly at the beginning of a line). A bibliography not following this format will not
produce useful results. Bibliographies can be created by hand, or with BibTeX, or any
other method.
The "key" attribute for the "citation" element is taken as the KEY argument to the
"\bibitem" command. The sequential number of the citation (1, 2, ...) is appended. The
argument to "\bibitem" can be empty ("\bibitem{}", and the sequence number will be used on
its own. Although TeX will not handle empty "\bibitem" keys, it can be convenient when
creating a ".bbl" purely for Crossref.
The ".rpi" file is also checked for the bibliography information, in this same format.
Feature request: if anyone is interested in figuring out how to generate structured
citations
(<https://data.crossref.org/reports/help/schema_doc/4.4.2/schema_4_4_2.html#citation>)
instead of these flat text dumps, that would be great.
EXAMPLES
ltx2crossrefxml.pl ../paper1/paper1.tex ../paper2/paper2.tex \
-o result.xml
ltx2crossrefxml.pl -c myconfig.cfg paper.tex -o paper.xml
AUTHOR
Boris Veytsman <https://github.com/borisveytsman/crossrefware>
COPYRIGHT AND LICENSE
Copyright (C) 2012-2021 Boris Veytsman
This is free software. You may redistribute copies of it under the terms of the GNU
General Public License <https://www.gnu.org/licenses/gpl.html>. There is NO WARRANTY, to
the extent permitted by law.
2021-10-02 ltx2crossrefxml(1)