Ubuntu Manpage: mbsync - synchronize IMAP4 and Maildir mailboxes

NAME

       mbsync - synchronize IMAP4 and Maildir mailboxes

SYNOPSIS

       mbsync [options ...] {{channel[:box[{,|\n}...]]|group} ...|-a}

DESCRIPTION

       mbsync  is  a command line application which synchronizes mailboxes; currently Maildir and
       IMAP4 mailboxes are supported.  New messages, message deletions and flag  changes  can  be
       propagated both ways; the operation set can be selected in a fine-grained manner.
       Synchronization  is  based  on  unique  message  identifiers  (UIDs), so no identification
       conflicts can occur  (unlike  with  some  other  mail  synchronizers).   OTOH,  mbsync  is
       susceptible  to  UID  validity  changes  (but  will  recover  just  fine  if the change is
       unfounded).  Synchronization state is kept in one local text file per mailbox pair;  these
       files are protected against concurrent mbsync processes.  Mailboxes can be safely modified
       while mbsync operates (see INHERENT PROBLEMS  below  for  a  minor  exception).   Multiple
       replicas of each mailbox can be maintained.

OPTIONS

       -c, --config file
              Read  configuration  from  file.   By  default,  the  configuration  is  read  from
              ~/.mbsyncrc.

       -a, --all
              Select all configured channels. Any channel/group  specifications  on  the  command
              line are ignored.

       -l, --list
              Don't  synchronize  anything,  but  list all mailboxes in the selected channels and
              exit.

       -C[f][n], --create[-far|-near]
              Override any Create options from the config file. See below.

       -R[f][n], --remove[-far|-near]
              Override any Remove options from the config file. See below.

       -X[f][n], --expunge[-far|-near]
              Override any Expunge options from the config file. See below.

       {-n|-N|-d|-f|-0|-F}, {--new|--renew|--delete|--flags|--noop|--full}
       {-L|-H}[n][N][d][f], {--pull|--push}[-new|-renew|-delete|-flags]

              Override any Sync options from the config file. See below.

       -h, --help
              Display a summary of command line options.

       -v, --version
              Display version information.

       -V, --verbose
              Enable verbose mode, which displays what is currently happening.

       -D[C][d|D][m][M][n|N][s]],    --debug[-crash|-driver|-driver-all|-maildir|-main|-net|-net-
       all|-sync]
              Enable debugging categories:
                  C, crash - use built-in crash handler
                  d, driver - print driver calls (metadata only)
                  D, driver-all - print driver calls (including messages)
                  m, maildir - print maildir debug info
                  M, main - print main debug info
                  n, net - print network traffic (protocol only)
                  N, net-all - print network traffic (including payloads)
                  s, sync - print synchronization debug info
              All  categories  except  crash  implictly  enable  verbose  mode.  Without category
              specification, all categories except net-all are enabled.

       -q, --quiet
              Suppress progress counters (this is implicit if stdout is no TTY, or any  debugging
              categories are enabled) and notices.  If specified twice, suppress warning messages
              as well.

CONFIGURATION

The configuration file is mandatory; mbsync will not run without it. Lines starting with
a hash mark (#) are comments and are ignored entirely. Configuration items are keywords
followed by one or more arguments; arguments containing spaces must be enclosed in double
quotes ("), and literal double quotes and backslashes (\) must be backslash-escaped. All
keywords (including those used as arguments) are case-insensitive. Bash-like home
directory expansion using the tilde (~) is supported in all options which represent local
paths. There are a few global options, the others apply to particular sections. Sections
begin with a section-starting keyword and are terminated by an empty line or end of file.
Every section defines an object with an identifier unique within that object class.

There are two basic object classes: Stores and Channels. A Store defines a collection of
mailboxes; basically a folder, either local or remote. A Channel connects two Stores,
describing the way the two are synchronized.
There are two auxiliary object classes: Accounts and Groups. An Account describes the
connection part of network Stores, so server configurations can be shared between multiple
Stores. A Group aggregates multiple Channels to save typing on the command line.

File system locations (in particular, Path and Inbox) use the Store's internal path
separators, which may be slashes, periods, etc., or even combinations thereof.
Mailbox names, OTOH, always use canonical path separators, which are Unix-like forward
slashes.

All Stores
These options can be used in all supported Store types.
In this context, the term "remote" describes the second Store within a Channel, and not
necessarily a remote server.
The special mailbox INBOX exists in every Store; its physical location in the file system
is Store type specific.

Path path
The location of the Store in the (server's) file system. If this is no absolute
path, the reference point is Store type specific. This string is prepended to the
mailbox names addressed in this Store, but is not considered part of them; this is
important for Patterns and Create in the Channels section. Note that you must
append a slash if you want to specify an entire directory. (Default: none)

MaxSize size[k|m][b]
Messages larger than size will have only a small placeholder message propagated
into this Store. To propagate the full message, it must be flagged in either Store;
that can be done retroactively, in which case the ReNew operation needs to be
executed instead of New. This is useful for avoiding downloading messages with
large attachments unless they are actually needed. Caveat: Setting a size limit on
a Store you never read directly (which is typically the case for servers) is not
recommended, as you may never notice that affected messages were not propagated to
it.
K and M can be appended to the size to specify KiBytes resp. MeBytes instead of
bytes. B is accepted but superfluous. If size is 0, the maximum message size is
unlimited. (Default: 0)

MapInbox mailbox
Create a virtual mailbox (relative to Path) which aliases the INBOX. Makes sense in
conjunction with Patterns in the Channels section, though with a Maildir near side,
you probably want to place Inbox under Path instead. This virtual mailbox does not
support subfolders.

Flatten delim
Flatten the hierarchy within this Store by substituting the canonical hierarchy
delimiter / with delim. This can be useful when the MUA used to access the Store
provides suboptimal handling of hierarchical mailboxes, as is the case with Mutt.
A common choice for the delimiter is ..
Note that flattened sub-folders of the INBOX always end up under Path, including
the "INBOXdelim" prefix.

Trash mailbox
Specifies a mailbox (relative to Path) to copy deleted messages to prior to
expunging. See RECOMMENDATIONS and INHERENT PROBLEMS below. (Default: none)

TrashNewOnly yes|no
When trashing, copy only not yet propagated messages. This makes sense if the
remote Store has a Trash as well (with TrashNewOnly no). (Default: no)

TrashRemoteNew yes|no
When expunging the remote Store, copy not yet propagated messages to this Store's
Trash. When using this, the remote Store does not need an own Trash at all, yet all
messages are archived. (Default: no)

Maildir Stores
The reference point for relative Paths is the current working directory.

As mbsync needs UIDs, but no standardized UID storage scheme exists for Maildir, mbsync
supports two schemes, each with its pros and cons.
The native scheme is stolen from the latest Maildir patches to c-client and is therefore
compatible with pine. The UID validity is stored in a file named .uidvalidity; the UIDs
are encoded in the file names of the messages.
The alternative scheme is based on the UID mapping used by isync versions 0.8 and 0.9.x.
The invariant parts of the file names of the messages are used as keys into a Berkeley
database named .isyncuidmap.db, which holds the UID validity as well.
The native scheme is faster, more space efficient, endianness independent and "human
readable", but will be disrupted if a message is copied from another mailbox without
getting a new file name; this would result in duplicated UIDs sooner or later, which in
turn results in a UID validity change, making synchronization fail. The alternative
scheme would fail if a MUA changed a message's file name in a part mbsync considers
invariant; this would be interpreted as a message deletion and a new message, resulting in
unnecessary traffic.
Mutt is known to work fine with both schemes.
Use mdconvert to convert mailboxes from one scheme to the other.

MaildirStore name
Define the Maildir Store name, opening a section for its parameters.

AltMap yes|no
Use the alternative UID storage scheme for mailboxes in this Store. This does not
affect mailboxes that do already have a UID storage scheme; use mdconvert to change
it. See RECOMMENDATIONS below. (Default: no)

Inbox path
The location of the INBOX. This is not relative to Path, but it is allowed to place
the INBOX inside the Path. (Default: ~/Maildir)

InfoDelimiter delim
The character used to delimit the info field from a message's basename. The
Maildir standard defines this to be the colon, but this is incompatible with
DOS/Windows file systems. (Default: the value of FieldDelimiter)

SubFolders Verbatim|Maildir++|Legacy
The on-disk folder naming style used for hierarchical mailboxes. This option has
no effect when Flatten is used.
Suppose mailboxes with the canonical paths top/sub/subsub and INBOX/sub/subsub, the
styles will yield the following on-disk paths:
Verbatim - Path/top/sub/subsub and Inbox/sub/subsub (this is the style you probably
want to use)
Maildir++ - Inbox/.top.sub.subsub and Inbox/..sub.subsub (this style is compatible
with Courier and Dovecot - but note that the mailbox metadata format is not
compatible). Note that attempts to set Path are rejected in this mode.
Legacy - Path/top/.sub/.subsub and Inbox/.sub/.subsub (this is mbsync's historical
style)
(Default: unset; will error out when sub-folders are encountered)

IMAP4 Accounts
IMAPAccount name
Define the IMAP4 Account name, opening a section for its parameters.

Host host
Specify the DNS name or IP address of the IMAP server.
If Tunnel is used, this setting is needed only if SSLType is not None and
CertificateFile is not used, in which case the host name is used for certificate
subject verification.

Port port
Specify the TCP port number of the IMAP server. (Default: 143 for IMAP, 993 for
IMAPS)
If Tunnel is used, this setting is ignored.

Timeout timeout
Specify the connect and data timeout for the IMAP server in seconds. Zero means
unlimited. (Default: 20)

User username
Specify the login name on the IMAP server.

UserCmd [+]command
Specify a shell command to obtain a user rather than specifying a user directly.
This allows you to script retrieving user names.
The command must produce exactly one line on stdout; the trailing newline is
optional. Prepend + to the command to indicate that it produces TTY output (e.g.,
a prompt); failure to do so will merely produce messier output. Remember to
backslash-escape double quotes and backslashes embedded into the command.

Pass password
Specify the password for username on the IMAP server. Note that this option is not
required. If neither a password nor a password command is specified in the
configuration file, mbsync will prompt you for a password.

PassCmd [+]command
Specify a shell command to obtain a password rather than specifying a password
directly. This allows you to use password files and agents.
See UserCmd above for details.

UseKeychain yes|no
Whether to use the macOS Keychain to obtain the password. (Default: no)

The neccessary keychain item can be created this way:

security add-internet-password -r imap -s Host -a User -w password [ -T
/path/to/mbsync ]

Tunnel command
Specify a command to run to establish a connection rather than opening a TCP
socket. This allows you to run an IMAP session over an SSH tunnel, for example.

AuthMechs type ...
The list of acceptable authentication mechanisms. In addition to the mechanisms
listed in the SASL registry (link below), the legacy IMAP LOGIN mechanism is known.
The wildcard * represents all mechanisms that are deemed secure enough for the
current SSLType setting. The actually used mechanism is the most secure choice
from the intersection of this list, the list supplied by the server, and the
installed SASL modules. (Default: *)

SSLType {None|STARTTLS|IMAPS}
Select the connection security/encryption method:
None - no security. This is the default when Tunnel is set, as tunnels are usually
secure.
STARTTLS - security is established via the STARTTLS extension after connecting the
regular IMAP port 143. Most servers support this, so it is the default (unless a
tunnel is used).
IMAPS - security is established by starting SSL/TLS negotiation right after
connecting the secure IMAP port 993.

SSLVersions [SSLv3] [TLSv1] [TLSv1.1] [TLSv1.2] [TLSv1.3]
Select the acceptable SSL/TLS versions. Use old versions only when the server has
problems with newer ones. (Default: [TLSv1] [TLSv1.1] [TLSv1.2] [TLSv1.3]).

SystemCertificates yes|no
Whether the system's default CA (certificate authority) certificate store should be
used to verify certificate trust chains. Disable this if you want to trust only
hand-picked certificates. (Default: yes)

CertificateFile path
File containing additional X.509 certificates used to verify server identities. It
may contain two types of certificates:

Host These certificates are matched only against the received server certificate
itself. They are always trusted, regardless of validity. A typical use
case would be forcing acceptance of an expired certificate.
These certificates may be obtained using the mbsync-get-cert tool; make sure
to verify their fingerprints before trusting them, or transfer them securely
from the server's network (if it can be trusted beyond the server itself).

CA These certificates are used as trust anchors when building the certificate
chain for the received server certificate. They are used to supplant or
supersede the system's trust store, depending on the SystemCertificates
setting; it is not necessary and not recommended to specify the system's
trust store itself here. The trust chains are fully validated.

ClientCertificate path
File containing a client certificate to send to the server. ClientKey should also
be specified.
Note that client certificate verification is usually not required, so it is
unlikely that you need this option.

ClientKey path
File containing the private key corresponding to ClientCertificate.

CipherString string
Specify OpenSSL cipher string for connections secured with TLS up to version 1.2
(but not 1.3 and above). The format is described in ciphers(1). (Default: empty,
which implies system wide policy).

PipelineDepth depth
Maximum number of IMAP commands which can be simultaneously in flight. Setting
this to 1 disables pipelining. This is mostly a debugging option, but may also be
used to limit average bandwidth consumption (GMail may require this if you have a
very fast connection), or to spare flaky servers like M$ Exchange. (Default:
unlimited)

DisableExtension[s] extension ...
Disable the use of specific IMAP extensions. This can be used to work around bugs
in servers (and possibly mbsync itself). (Default: empty)

IMAP Stores
The reference point for relative Paths is whatever the server likes it to be; probably the
user's $HOME or $HOME/Mail on that server. The location of INBOX is up to the server as
well and is usually irrelevant.

IMAPStore name
Define the IMAP4 Store name, opening a section for its parameters.

Account account
Specify which IMAP4 Account to use. Instead of defining an Account and referencing
it here, it is also possible to specify all the Account options directly in the
Store's section - this makes sense if an Account is used for one Store only anyway.

UseNamespace yes|no
Selects whether the server's first "personal" NAMESPACE should be prefixed to
mailbox names. Disabling this makes sense for some broken IMAP servers. This
option is meaningless if a Path was specified. (Default: yes)

PathDelimiter delim
Specify the server's hierarchy delimiter. (Default: taken from the server's first
"personal" NAMESPACE)
Do not abuse this to re-interpret the hierarchy. Use Flatten instead.

SubscribedOnly yes|no
Selects whether to synchronize only mailboxes that are subscribed to on the IMAP
server. In technical terms, if this option is set, mbsync will use the IMAP command
LSUB instead of LIST to look for mailboxes in this Store. This option make sense
only in conjunction with Patterns. (Default: no)

Channels
Channel name
Define the Channel name, opening a section for its parameters.

{Far|Near} :store:[mailbox]
Specify the far resp. near side Store to be connected by this Channel. If Patterns
are specified, mailbox is interpreted as a prefix which is not matched against the
patterns, and which is not affected by mailbox list overrides. Otherwise, if
mailbox is omitted, INBOX is assumed.

Pattern[s] [!]pattern ...
Instead of synchronizing only one mailbox pair, synchronize all mailboxes that
match the pattern(s). The mailbox names are the same on the far and near side.
Patterns are IMAP4 patterns, i.e., * matches anything and % matches anything up to
the next hierarchy delimiter. Prepending ! to a pattern makes it an exclusion.
Multiple patterns can be specified (either by supplying multiple arguments or by
using Pattern multiple times); later matches take precedence.
Note that INBOX is not matched by wildcards, unless it lives under Path.
The mailbox list selected by Patterns can be overridden by a mailbox list in a
channel reference (a Group specification or the command line).
Example: "Patterns % !Trash"

MaxSize size[k|m][b]
Analogous to the homonymous option in the Stores section, but applies equally to
Far and Near. Note that this actually modifies the Stores, so take care not to
provide conflicting settings if you use the Stores in multiple Channels.

MaxMessages count
Sets the maximum number of messages to keep in each near side mailbox. This is
useful for mailboxes where you keep a complete archive on the server, but want to
mirror only the last messages (for instance, for mailing lists). The messages that
were the first to arrive in the mailbox (independently of the actual date of the
message) will be deleted first. Messages that are flagged (marked as important)
and (by default) unread messages will not be automatically deleted. If count is 0,
the maximum number of messages is unlimited (Default: 0).

ExpireUnread yes|no
Selects whether unread messages should be affected by MaxMessages. Normally,
unread messages are considered important and thus never expired. This ensures that
you never miss new messages even after an extended absence. However, if your
archive contains large amounts of unread messages by design, treating them as
important would practically defeat MaxMessages. In this case you need to enable
this option. (Default: no).

Sync {None|[Pull] [Push] [New] [ReNew] [Delete] [Flags]|All}
Select the synchronization operation(s) to perform:
Pull - propagate changes from far to near side.
Push - propagate changes from near to far side.
New - propagate newly appeared messages.
ReNew - upgrade placeholders to full messages. Useful only with a configured
MaxSize.
Delete - propagate message deletions. This applies only to messages that are
actually gone, i.e., were expunged. The affected messages in the remote Store are
marked as deleted only, i.e., they won't be really deleted until that Store is
expunged.
Flags - propagate flag changes. Note that Deleted/Trashed is a flag as well; this
is particularly interesting if you use mutt with the maildir_trash option.
All (--full on the command line) - all of the above. This is the global default.
None (--noop on the command line) - don't propagate anything. Useful if you want
to expunge only.

Pull and Push are direction flags, while New, ReNew, Delete and Flags are type
flags. The two flag classes make up a two-dimensional matrix (a table). Its cells
are the individual actions to perform. There are two styles of asserting the cells:
In the first style, the flags select entire rows/colums in the matrix. Only the
cells which are selected both horizontally and vertically are asserted. Specifying
no flags from a class is like specifying all flags from this class. For example,
"Sync Pull New Flags" will propagate new messages and flag changes from the far
side to the near side, "Sync New Delete" will propagate message arrivals and
deletions both ways, and "Sync Push" will propagate all changes from the near side
to the far side.
In the second style, direction flags are concatenated with type flags; every
compound flag immediately asserts a cell in the matrix. In addition to at least one
compound flag, the individual flags can be used as well, but as opposed to the
first style, they immediately assert all cells in their respective row/column. For
example, "Sync PullNew PullDelete Push" will propagate message arrivals and
deletions from the far side to the near side and any changes from the near side to
the far side. Note that it is not allowed to assert a cell in two ways, e.g.
"Sync PullNew Pull" and "Sync PullNew Delete Push" induce error messages.

Create {None|Far|Near|Both}
Automatically create missing mailboxes [on the far/near side]. Otherwise print an
error message and skip that mailbox pair if a mailbox and the corresponding sync
state does not exist. (Global default: None)

Remove {None|Far|Near|Both}
Propagate mailbox deletions [to the far/near side]. Otherwise print an error
message and skip that mailbox pair if a mailbox does not exist but the
corresponding sync state does.
For MailDir mailboxes it is sufficient to delete the cur/ subdirectory to mark them
as deleted. This ensures compatibility with SyncState *.
Note that for safety, non-empty mailboxes are never deleted.
(Global default: None)

Expunge {None|Far|Near|Both}
Permanently remove all messages [on the far/near side] marked for deletion. See
RECOMMENDATIONS below. (Global default: None)

CopyArrivalDate {yes|no}
Selects whether their arrival time should be propagated together with the messages.
Enabling this makes sense in order to keep the time stamp based message sorting
intact. Note that IMAP does not guarantee that the time stamp (termed internal
date) is actually the arrival time, but it is usually close enough. (Default: no)

Sync, Create, Remove, Expunge, MaxMessages, and CopyArrivalDate can be used before any
section for a global effect. The global settings are overridden by Channel-specific
options, which in turn are overridden by command line switches.

SyncState {*|path}
Set the location of this Channel's synchronization state files. * means that the
state should be saved in a file named .mbsyncstate in the near side mailbox itself;
this has the advantage that you do not need to handle the state file separately if
you delete the mailbox, but it works only with Maildir mailboxes, obviously.
Otherwise this is interpreted as a string to prepend to the near side mailbox name
to make up a complete path.
This option can be used outside any section for a global effect. In this case the
appended string is made up according to the pattern :far-store:far-box_:near-
store:near-box (see also FieldDelimiter below).
(Global default: ~/.mbsync/).

Groups
Group name [channel[:box[,...]]] ...
Define the Group name, opening a section for its parameters. Note that even though
Groups have an own namespace, they will "hide" Channels with the same name on the
command line.
One or more Channels can be specified on the same line.
If you supply one or more boxes to a channel, they will be used instead of what is
specified in the Channel's Patterns. The same can be done on the command line,
except that there newlines can be used as mailbox name separators as well.

Channel[s] channel[:box[,...]] ...
Add the specified channels to the group. This option can be specified multiple
times within a Group.

Global Options
FSync yes|no
Selects whether mbsync performs forced flushing, which determines the level of data
safety after system crashes and power outages. Disabling it is reasonably safe for
file systems which are mounted with data=ordered mode. Enabling it is a wise
choice for file systems mounted with data=writeback, in particular modern systems
like ext4, btrfs and xfs. The performance impact on older file systems may be
disproportionate. (Default: yes)

FieldDelimiter delim
The character to use to delimit fields in the string appended to a global
SyncState. mbsync prefers to use the colon, but this is incompatible with
DOS/Windows file systems. This option is meaningless for SyncState if the latter
is *, obviously. However, it also determines the default of InfoDelimiter. (Global
default: ; on Windows, : everywhere else)

BufferLimit size[k|m][b]
The per-Channel, per-direction instantaneous memory usage above which mbsync will
refrain from using more memory. Note that this is no absolute limit, as even a
single message can consume more memory than this. (Default: 10M)

CONSOLE OUTPUT

       If mbsync's output is connected to a console, it will print progress counters by  default.
       The output will look like this:

           C: 1/2  B: 3/4  F: +13/13 *23/42 #0/0  N: +0/7 *0/0 #0/0

       This represents the cumulative progress over channels, boxes, and messages affected on the
       far and near side, respectively.  The message counts represent  added  messages,  messages
       with  updated  flags, and trashed messages, respectively.  No attempt is made to calculate
       the totals in advance, so they grow over time as more information is gathered.

RECOMMENDATIONS

Make sure your IMAP server does not auto-expunge deleted messages - it is slow, and
semantically somewhat questionable. Specifically, Gmail needs to be configured not to do
it.

By default, mbsync will not delete any messages - deletions are propagated by marking the
messages as deleted on the remote store. Once you have verified that your setup works,
you will typically want to set Expunge to Both, so that deletions become effective.

mbsync's built-in trash functionality relies on mbsync doing the expunging of deleted
messages. This is the case when it propagates deletions of previously propagated messages,
and the trash is on the target store (typically your IMAP server).
However, when you intend mbsync to trash messages which were not propagated yet, the MUA
must mark the messages as deleted without expunging them (e.g., Mutt's maildir_trash
option). Note that most messages are propagated a long time before they are deleted, so
this is a corner case you probably do not want to optimize for. This also implies that the
TrashNewOnly and TrashRemoteNew options are typically not very useful.

If your server supports auto-trashing (as Gmail does), it is probably a good idea to rely
on that instead of mbsync's trash functionality. If you do that, and intend to
synchronize the trash like other mailboxes, you should not use mbsync's Trash option at
all.

Use of the Trash option with M$ Exchange 2013 requires the use of DisableExtension MOVE
due to a server bug.

When using the more efficient default UID mapping scheme, it is important that the MUA
renames files when moving them between Maildir folders. Mutt always does that, while mu4e
needs to be configured to do it:
(setq mu4e-change-filenames-when-moving t)

INHERENT PROBLEMS

       Changes done after mbsync has retrieved the message list will not  be  synchronised  until
       the next time mbsync is invoked.

       Using  Trash  on  IMAP Stores without the UIDPLUS extension (notably, M$ Exchange up to at
       least 2010) bears a race condition: messages will be lost if they are  marked  as  deleted
       after the message list was retrieved but before the mailbox is expunged.  There is no risk
       as long as the IMAP mailbox is accessed by only one client (including mbsync) at a time.

FILES

       ~/.mbsyncrc
              Default configuration file

       ~/.mbsync/
              Directory containing synchronization state files

AUTHORS

       Originally  written  by  Michael  R.  Elkins, rewritten and currently maintained by Oswald
       Buddenhagen, contributions by Theodore Y. Ts'o.

                                           2015 Mar 22                                  mbsync(1)