Provided by: pullimap_0.5.6-1ubuntu1_all 
NAME
PullIMAP - Pull mails from an IMAP mailbox and deliver them to an SMTP session
SYNOPSIS
pullimap [--config=FILE] [--idle[=SECONDS]] [--no-delivery] [--quiet] SECTION
DESCRIPTION
pullimap retrieves messages from an IMAP mailbox and deliver them to an SMTP or LMTP
transmission channel. It can also remove old messages after a configurable retention
period.
A statefile is used to keep track of the mailbox’s UIDVALIDITY and UIDNEXT values. While
pullimap is running, the statefile is also used to keep track of UIDs being delivered,
which avoids duplicate deliveries in case the process is interrupted. See the control
flow section below for details.
OPTIONS
--config=FILE
Specify an alternate configuration file. Relative paths start from
$XDG_CONFIG_HOME/pullimap, or ~/.config/pullimap if the XDG_CONFIG_HOME environment
variable is unset.
--idle[=seconds]
Don’t exit after a successful poll. Instead, keep the connection open and issue
IDLE commands (require an IMAP server supporting RFC 2177) to watch for updates in
the mailbox. This also enables SO_KEEPALIVE on the socket. Each IDLE command is
terminated after at most seconds (29 minutes by default) to avoid being logged out
for inactivity.
--no-delivery
Update the statefile, but skip SMTP/LMTP delivery. This is mostly useful for
initializing the statefile when migrating to pullimap from another similar program
such as fetchmail(1) or getmail(1).
-q, --quiet
Try to be quiet.
--debug
Turn on debug mode. Debug messages, which includes all IMAP traffic besides
literals, are written to the given logfile. The LOGIN and AUTHENTICATE commands
are however redacted (in order to avoid disclosing authentication credentials)
unless the --debug flag is set multiple times.
-h, --help
Output a brief help and exit.
--version
Show the version number and exit.
CONFIGURATION FILE
Unless told otherwise by the --config=FILE command-line option, pullimap reads its
configuration from $XDG_CONFIG_HOME/pullimap/config (or ~/.config/pullimap/config if the
XDG_CONFIG_HOME environment variable is unset) as an INI file. The syntax of the
configuration file is a series of OPTION=VALUE lines organized under some [SECTION]; lines
starting with a `#' or `;' character are ignored as comments. Valid options are:
statefile
State file to use to keep track of the mailbox’s UIDVALIDITY and UIDNEXT values.
Relative paths start from $XDG_DATA_HOME/pullimap, or ~/.local/share/pullimap if
the XDG_DATA_HOME environment variable is unset. (Default: the parent section name
of the option.)
mailbox
The IMAP mailbox (UTF-7 encoded and unquoted) to pull messages from. Support for
persistent message Unique Identifiers (UID) is required. (Default: INBOX.)
deliver-method
PROTOCOL:[ADDRESS]:PORT where to deliver messages. Both SMTP and LMTP servers are
supported, and SMTP pipelining is used when possible. (Default:
smtp:[127.0.0.1]:25.)
deliver-ehlo
Name to use in EHLO or LHLO commands. (Default: localhost.localdomain.)
deliver-rcpt
Message recipient. Note that the local part needs to quoted if it contains special
characters; see RFC 5321 for details. (Default: the username associated with the
effective user ID of the pullimap process.)
purge-after
Retention period (in days), after which messages are removed from the IMAP server.
(The value is at best 24h accurate due to the IMAP SEARCH criterion ignoring time
and timezone.) If purge-after is set to 0 then messages are deleted immediately
after delivery. Otherwise pullimap issues an IMAP SEARCH (or extended SEARCH on
servers advertising the ESEARCH capability) command to list old messages; if --idle
is set then the SEARCH command is issued again every 12 hours.
type One of imap, imaps or tunnel. type=imap and type=imaps are respectively used for
IMAP and IMAP over SSL/TLS connections over an INET socket. type=tunnel causes
pullimap to create an unnamed pair of connected sockets for inter-process
communication with a command instead of opening a network socket. (Default:
imaps.)
host Server hostname or IP address, for type=imap and type=imaps. The value can
optionally be enclosed in square brackets to force its interpretation as an IP
literal (hence skip name resolution). (Default: localhost.)
port Server port. (Default: 143 for type=imap, 993 for type=imaps.)
proxy Optional SOCKS proxy to use for TCP connections to the IMAP server (type=imap and
type=imaps only), formatted as PROTOCOL://[USER:PASSWORD@]PROXYHOST[:PROXYPORT].
If PROXYPORT is omitted, it is assumed at port 1080. Only SOCKSv5 is supported
(with optional username/password authentication), in two flavors: socks5:// to
resolve hostname locally, and socks5h:// to let the proxy resolve hostname.
command
Command to use for type=tunnel. Must speak the IMAP4rev1 protocol on its standard
output, and understand it on its standard input. The value is passed to `/bin/sh
-c` if it contains shell metacharacters; otherwise it is split into words and the
resulting list is passed to execvp(3).
STARTTLS
Whether to use the STARTTLS directive to upgrade to a secure connection. Setting
this to YES for a server not advertising the STARTTLS capability causes pullimap to
immediately abort the connection. (Ignored for types other than imap. Default:
YES.)
auth Space-separated list of preferred authentication mechanisms. pullimap uses the
first mechanism in that list that is also advertised (prefixed with AUTH=) in the
server’s capability list. Supported authentication mechanisms are PLAIN and LOGIN.
(Default: PLAIN LOGIN.)
username, password
Username and password to authenticate with. Can be required for non pre-
authenticated connections, depending on the chosen authentication mechanism.
compress
Whether to use the IMAP COMPRESS extension for servers advertising it. (Default:
YES.)
null-stderr
Whether to redirect command’s standard error to /dev/null for type=tunnel.
(Default: NO.)
SSL_protocols
Space-separated list of SSL/TLS protocol versions to explicitly enable (or disable
if prefixed with an exclamation mark !). Potentially known protocols are SSLv2,
SSLv3, TLSv1, TLSv1.1, TLSv1.2, and TLSv1.3, depending on the OpenSSL version used.
Enabling a protocol is a short-hand for disabling all other protocols.
DEPRECATED: Use SSL_protocol_min and/or SSL_protocol_max instead.
SSL_protocol_min, SSL_protocol_max
Set minimum resp. maximum SSL/TLS protocol version to use for the connection.
Potentially recognized values are SSLv3, TLSv1, TLSv1.1, TLSv1.2, and TLSv1.3,
depending on the OpenSSL version used.
SSL_cipherlist, SSL_ciphersuites
Sets the TLSv1.2 and below cipher list resp. TLSv1.3 cipher suites. The
combination of these lists is sent to the server, which then determines which
cipher to use (normally the first supported one from the list sent by the client).
The default suites depend on the OpenSSL version and its configuration, see
ciphers(1ssl) for more information.
SSL_fingerprint
Space-separated list of acceptable fingerprints for the server certificate’s
Subject Public Key Info, in the form [ALGO$]DIGEST_HEX where ALGO is the digest
algorithm (by default sha256). Attempting to connect to a server with a non-
matching certificate SPKI fingerprint causes pullimap to abort the connection
during the SSL/TLS handshake. The following command can be used to compute the
SHA-256 digest of a certificate’s Subject Public Key Info:
$ openssl x509 -in /path/to/server/certificate.pem -pubkey \
| openssl pkey -pubin -outform DER \
| openssl dgst -sha256
Specifying multiple digest values can be useful in key rollover scenarios and/or
when the server supports certificates of different types (for instance a dual-cert
RSA/ECDSA setup). In that case the connection is aborted when none of the
specified digests matches.
SSL_verify
Whether to 1/ verify the server certificate chain; and 2/ match its Subject
Alternative Name (SAN) or Subject CommonName (CN) against the value of the host
option. (Default: YES.)
Note that using SSL_fingerprint to specify the fingerprint of the server
certificate provides an independent server authentication measure as it pins
directly its key material and ignore its chain of trust.
SSL_CAfile
File containing trusted certificates to use during server certificate verification
when SSL_verify=YES.
Trusted CA certificates are loaded from the default system locations unless one (or
both) of SSL_CAfile or SSL_CApath is set.
SSL_CApath
Directory to use for server certificate verification when SSL_verify=YES. This
directory must be in “hash format”, see verify(1ssl) for more information.
Trusted CA certificates are loaded from the default system locations unless one (or
both) of SSL_CAfile or SSL_CApath is set.
SSL_hostname
Name to use for the TLS SNI (Server Name Indication) extension. The default value
is taken from the host option when it is a hostname, and to the empty string when
it is an IP literal. Setting SSL_hostname to the empty string explicitly disables
SNI.
CONTROL FLOW
pullimap opens the statefile corresponding to a given configuration SECTION with O_DSYNC
to ensure that written data is flushed to the underlying hardware by the time write(2)
returns. Moreover an exclusive lock is placed on the file descriptor immediately after
opening to prevent multiple pullimap processes from accessing the statefile concurrently.
Each statefile consists of a series of 32-bits big-endian integers. Usually there are
only two integers: the first is the mailbox’s UIDVALIDITY value, and the second is the
mailbox’s last seen UIDNEXT value (pullimap then assumes that all messages with UID
smaller than this UIDNEXT value have already been retrieved and delivered). The IMAP4rev1
specification does not guaranty that untagged FETCH responses are sent ordered by UID in
response to a UID FETCH command. Thus it would be unsafe for pullimap to update the
UIDNEXT value in its statefile while the UID FETCH command is progress. Instead, for each
untagged FETCH response received while the UID FETCH command is in progress, pullimap
delivers the message RFC822 body to the SMTP or LMTP server (specified with deliver-
method) then appends the message UID to the statefile. When the UID FETCH command
eventually terminates, pullimap updates the UIDNEXT value in the statefile and truncate
the file down to 8 bytes. Keeping track of message UIDs as they are received avoids
duplicate in the event of a crash or connection loss while the UID FETCH command is in
progress.
In more details, pullimap works as follows:
1. Issue a UID FETCH command to retrieve message ENVELOPE and RFC822 (and UID) with UID
bigger or equal than the UIDNEXT value found in the statefile. While the UID FETCH
command is in progress, perform the following for each untagged FETCH response sent by
the server:
i. if no SMTP/LMTP transmission channel was opened, open one to the server specified
with deliver-method and send an EHLO (or LHO) command with the domain specified
by deliver-ehlo (the channel is kept open and shared for all messages retrieved
while the UID FETCH IMAP command is in progress);
ii. perform a mail transaction (using SMTP pipelining if possible) to deliver the
retrieved message RFC822 body to the SMTP or LMTP session; and
iii. append the message UID to the statefile.
2. If an SMTP/LMTP transmission channel was opened, send a QUIT command to terminate it
gracefully.
3. Issue a UID STORE command to mark all retrieved messages (and stalled UIDs found in the
statefile after the eighth byte) as \Seen.
4. Update the statefile with the new UIDNEXT value (bytes 5-8).
5. Truncate the statefile down to 8 bytes (so that it contains only two 32-bits integers,
respectively the mailbox’s current UIDVALIDITY and UIDNEXT values).
6. If --idle was set, issue an IDLE command; stop idling and go back to step 1 when a new
message is received (or when the IDLE timeout expires).
STANDARDS
• M. Leech, M. Ganis, Y. Lee, R. Kuris, D. Koblas and L. Jones, SOCKS Protocol
Version 5, RFC 1928, March 1996.
• M. Leech, Username/Password Authentication for SOCKS V5, RFC 1929, March 1996.
• J. Myers, Local Mail Transfer Protocol, RFC 2033, October 1996.
• J. Myers, IMAP4 non-synchronizing literals, RFC 2088, January 1997.
• D. Goldsmith and M. Davis, A Mail-Safe Transformation Format of Unicode, RFC 2152, May
1997.
• B. Leiba, IMAP4 IDLE command, RFC 2177, June 1997.
• C. Newman, Using TLS with IMAP, POP3 and ACAP, RFC 2595, June 1999.
• N. Freed, SMTP Service Extension for Command Pipelining, RFC 2920, September 2000.
• M. Crispin, Internet Message Access Protocol - Version 4rev1, RFC 3501, March 2003.
• M. Crispin, Internet Message Access Protocol (IMAP) - UIDPLUS extension, RFC 4315,
December 2005.
• A. Gulbrandsen, The IMAP COMPRESS Extension, RFC 4978, August 2007.
• A. Melnikov and D. Cridland, IMAP4 Extension to SEARCH Command for Controlling What
Kind of Information Is Returned, RFC 4731, November 2006.
• R. Siemborski and A. Gulbrandsen, IMAP Extension for Simple Authentication and
Security Layer (SASL) Initial Client Response, RFC 4959, September 2007.
• J. Klensin, Simple Mail Transfer Protocol, RFC 5321, October 2008.
BUGS AND FEEDBACK
Bugs or feature requests for pullimap should be filed with the Debian project’s bug
tracker at <https://www.debian.org/Bugs/>.
AUTHORS
Guilhem Moulin (mailto:guilhem@fripost.org).
March 2016 pullimap(1)