NAME

       sane-hp3900 - SANE backend for RTS8822 chipset based scanners

DESCRIPTION

       The  sane-hp3900 library implements a SANE (Scanner Access Now Easy) backend that provides
       access at least to the following USB flatbed scanners:

              Model:                     Chipset:
              ------                     --------
              HP ScanJet 3800            RTS8822BL-03A
              HP ScanJet 3970            RTS8822L-01H
              HP ScanJet 4070 Photosmart RTS8822L-01H
              HP ScanJet 4370            RTS8822L-02A
              HP ScanJet G2710           RTS8822BL-03A
              HP ScanJet G3010           RTS8822L-02A
              HP ScanJet G3110           RTS8822L-02A
              UMAX Astra 4900/4950       RTS8822L-01H *
              BenQ 5550                  RTS8823L-01E *

       More   details    can    be    found    on    the    sane-hp3900(5)    backend    homepage
       http://sourceforge.net/projects/hp3900-series/.

       This  is  ALPHA  software.  Keep your hand at the scanner's plug and unplug it, if scanner
       does not start to scan. See also the BUGS section.

       If you own a scanner other than the ones listed above that works with this backend, please
       let  us  know this by sending the scanner's exact model name and the USB vendor and device
       ids (e.g. from /proc/bus/usb/devices, sane-find-scanner(1) or syslog) to us. Even  if  the
       scanner's  name  is only slightly different from the models mentioned above, please let us
       know.

CONFIGURATION

       The contents of the hp3900.conf file is a list of usb lines containing vendor and  product
       ids  that  correspond to USB scanners. The file can also contain the names of device files
       that correspond to an HP 39XX scanner.  Empty lines and lines starting with  a  hash  mark
       (#)  are  ignored.   The  scanners are autodetected by usb vendor_id product_id statements
       which are already included into hp3900.conf.  "vendor_id" and "product_id" are hexadecimal
       numbers  that identify the scanner. If autodetection does not work, add the device name of
       your scanner to the configuration file,

FILES

       /etc/sane.d/hp3900.conf
              The backend configuration file (see also description of SANE_CONFIG_DIR below).

       /usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.a
              The static library implementing this backend.

       /usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so
              The shared library implementing this  backend  (present  on  systems  that  support
              dynamic loading).

ENVIRONMENT

       SANE_CONFIG_DIR
              This  environment  variable  specifies the list of directories that may contain the
              configuration file.  On *NIX systems, the directories  are  separated  by  a  colon
              (`:'),  under  OS/2, they are separated by a semi-colon (`;').  If this variable is
              not set, the configuration file is searched in two default directories: first,  the
              current  working  directory  (.)   and  then  in  /etc/sane.d.  If the value of the
              environment variable ends with the directory separator character, then the  default
              directories  are searched after the explicitly specified directories.  For example,
              setting SANE_CONFIG_DIR to "/tmp/config:" would result in  directories  tmp/config,
              ., and /etc/sane.d being searched (in this order).

       SANE_DEBUG_HP3900
              If  the  library was compiled with debug support enabled, this environment variable
              controls the debug level for  this  backend.   Higher  debug  levels  increase  the
              verbosity of the output.

              Example: export SANE_DEBUG_HP3900=4

SEE ALSO

       sane(7), sane-usb(5), sane-find-scanner(1),
       http://sourceforge.net/projects/hp3900-series/
       http://jkdsoftware.dyndns.org/drupal/?q=es/books/151

AUTHOR

       Jonathan Bravo Lopez <jkdsoft@gmail.com>

BUGS

       Scanning  is  only  tested with Linux/ix86/gcc. Be careful when testing on other operating
       systems and especially on big-endian platforms. The scanner may get wrong data.

                                           06 Jan 2009                             sane-hp3900(5)