Ubuntu Manpage: dbclient - lightweight SSH client

Provided by: dropbear-bin_2022.82-4_amd64

NAME

       dbclient - lightweight SSH client

SYNOPSIS

       dbclient  [flag  arguments]  [-p  port]  [-i  id]  [-L  l:h:p]  [-R  l:h:p] [-l user] host
       [more flags] [command]

       dbclient [args] [user1]@host1[^port1],[user2]@host2[^port2],...

DESCRIPTION

       dbclient is the client part of Dropbear SSH

OPTIONS

command
A command to run on the remote host. This will normally be run by the remote host
using the user's shell. The command begins at the first hyphen argument after the
host argument. If no command is specified an interactive terminal will be opened
(see -t and -T).

-p port
Connect to port on the remote host. Alternatively a port can be specified as
hostname^port. Default is 22.

-i idfile
Identity file. Read the identity key from file idfile (multiple allowed). This
file is created with dropbearkey(1) or converted from OpenSSH with
dropbearconvert(1). The default path ~/.ssh/id_dropbear is used

-L [listenaddress]:listenport:host:port
Local port forwarding. Forward listenport on the local host through the SSH
connection to port on host.

-R [listenaddress]:listenport:host:port
Remote port forwarding. Forward listenport on the remote host through the SSH
connection to port on host.

-l user
Username. Login as user on the remote host. An alternative is to specify
user@host.

-t Allocate a PTY. This is the default when no command is given, it gives a full
interactive remote session. The main effect is that keystrokes are sent remotely
immediately as opposed to local line-based editing.

-T Don't allocate a PTY. This is the default when a command is given. See -t.

-N Don't request a remote shell or run any commands. Any command arguments are
ignored.

-f Fork into the background after authentication. A command argument (or -N) is
required. This is useful when using password authentication.

-g Allow non-local hosts to connect to forwarded ports. Applies to -L and -R forwarded
ports, though remote connections to -R forwarded ports may be limited by the ssh
server.

-y Always accept hostkeys if they are unknown. If a hostkey mismatch occurs the
connection will abort as normal. If specified a second time no host key checking is
performed at all, this is usually undesirable.

-A Forward agent connections to the remote host. dbclient will use any OpenSSH-style
agent program if available ($SSH_AUTH_SOCK will be set) for public key
authentication. Forwarding is only enabled if -A is specified.

-W windowsize
Specify the per-channel receive window buffer size. Increasing this may improve
network performance at the expense of memory use. Use -h to see the default buffer
size.

-K timeout_seconds
Ensure that traffic is transmitted at a certain interval in seconds. This is useful
for working around firewalls or routers that drop connections after a certain
period of inactivity. The trade-off is that a session may be closed if there is a
temporary lapse of network connectivity. A setting if 0 disables keepalives. If no
response is received for 3 consecutive keepalives the connection will be closed.

-I idle_timeout
Disconnect the session if no traffic is transmitted or received for idle_timeout
seconds.

-J proxy_command

-J &fd
Use the standard input/output of the program proxy_command rather than using a
normal TCP connection. A hostname should be still be provided, as this is used for
comparing saved hostkeys. This command will be executed as "exec proxy_command ..."
with the default shell.

The second form &fd will make dbclient use the numeric file descriptor as a socket.
This can be used for more complex tunnelling scenarios. Example usage with socat is

socat EXEC:'dbclient -J &38 ev',fdin=38,fdout=38 TCP4:host.example.com:22

-B endhost:endport
"Netcat-alike" mode, where Dropbear will connect to the given host, then create a
forwarded connection to endhost. This will then be presented as dbclient's standard
input/output.

-c cipherlist
Specify a comma separated list of ciphers to enable. Use -c help to list
possibilities.

-m MAClist
Specify a comma separated list of authentication MACs to enable. Use -m help to
list possibilities.

-o option
Can be used to give options in the format used by OpenSSH config file. This is
useful for specifying options for which there is no separate command-line flag.
For full details of the options listed below, and their possible values, see
ssh_config(5). The following options have currently been implemented:

ExitOnForwardFailure
Specifies whether dbclient should terminate the connection if it cannot set
up all requested local and remote port forwardings. The argument must be
"yes" or "no". The default is "no".

UseSyslog
Send dbclient log messages to syslog in addition to stderr.

Port Specify a listening port, like the -p argument.

-s The specified command will be requested as a subsystem, used for sftp. Dropbear
doesn't implement sftp itself but the OpenSSH sftp client can be used eg sftp -S
dbclient user@host

-b [address][:port]
Bind to a specific local address when connecting to the remote host. This can be
used to choose from multiple outgoing interfaces. Either address or port (or both)
can be given.

-V Print the version

MULTI-HOP

       Dropbear  will  also  allow  multiple "hops" to be specified, separated by commas. In this
       case a connection will be made to the first host, then a TCP forwarded connection will  be
       made  through  that  to the second host, and so on. Hosts other than the final destination
       will not see anything other than the encrypted SSH stream.  A  port  for  a  host  can  be
       specified  with  a caret (eg matt@martello^44 ).  This syntax can also be used with scp or
       rsync (specifying dbclient as the ssh/rsh  command).  A  file  can  be  "bounced"  through
       multiple SSH hops, eg

       scp -S dbclient matt@martello,root@wrt,canyons:/tmp/dump .

       Note  that  hostnames are resolved by the prior hop (so "canyons" would be resolved by the
       host "wrt") in the example above, the same way as other -L TCP forwarded hosts  are.  Host
       keys are checked locally based on the given hostname.

ESCAPE CHARACTERS

       Typing  a  newline  followed  by  the   key  sequence  ~.  (tilde,  dot)  will terminate a
       connection.  The sequence  ~^Z  (tilde,  ctrl-z)  will  background  the  connection.  This
       behaviour only applies when a PTY is used.

ENVIRONMENT

       DROPBEAR_PASSWORD
              A  password  to  use  for remote authentication can be specified in the environment
              variable DROPBEAR_PASSWORD. Care should be taken that the password is  not  exposed
              to other users on a multi-user system, or stored in accessible files.

       SSH_ASKPASS
              dbclient  can  use  an  external  program  to  request  a  password  from  a  user.
              SSH_ASKPASS should be set to the path of a program that will return a  password  on
              standard  output.  This  program  will  only  be  used if either DISPLAY is set and
              standard input is not a TTY, or the environment variable SSH_ASKPASS_ALWAYS is set.

NOTES

       If compiled with zlib support and if the server supports  it,  dbclient  will  always  use
       compression.

AUTHOR

       Matt Johnston (matt@ucc.asn.au).
       Mihnea Stoenescu wrote initial Dropbear client support
       Gerrit Pape (pape@smarden.org) wrote this manual page.