Provided by: lvm2_2.03.16-1ubuntu1_amd64 
NAME
vgreduce — Remove physical volume(s) from a volume group
SYNOPSIS
vgreduce option_args position_args
[ option_args ]
-a|--all
-A|--autobackup y|n
--commandprofile String
--config String
-d|--debug
--devices PV
--devicesfile String
--driverloaded y|n
-f|--force
-h|--help
--journal String
--lockopt String
--longhelp
--mirrorsonly
--nohints
--nolocking
--profile String
-q|--quiet
--removemissing
--reportformat basic|json
-t|--test
-v|--verbose
--version
-y|--yes
DESCRIPTION
vgreduce removes one or more unused PVs from a VG.
USAGE
Remove a PV from a VG.
vgreduce VG PV ...
[ COMMON_OPTIONS ]
—
Remove all unused PVs from a VG.
vgreduce -a|--all VG
[ COMMON_OPTIONS ]
—
Remove all missing PVs from a VG.
vgreduce --removemissing VG
[ --mirrorsonly ]
[ COMMON_OPTIONS ]
—
Common options for command:
[ -A|--autobackup y|n ]
[ -f|--force ]
[ --reportformat basic|json ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
-a|--all
Removes all empty PVs if none are named on the command line.
-A|--autobackup y|n
Specifies if metadata should be backed up automatically after a change. Enabling
this is strongly advised! See vgcfgbackup(8) for more information.
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5) for more
information about profiles.
--config String
Config settings for the command. These override lvm.conf(5) settings. The String
arg uses the same format as lvm.conf(5), or may use section/field syntax. See
lvm.conf(5) for more information about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent
to the log file and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the command. Devices not
listed will appear to be missing. This option can be repeated, or accepts a comma
separated list of devices. This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must exist in
/etc/lvm/devices/ and is managed with the lvmdevices(8) command. This overrides
the lvm.conf(5) devices/devicesfile and devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing and
debugging.
-f|--force ...
Override various checks, confirmations and protections. Use with extreme caution.
-h|--help
Display help text.
--journal String
Record information in the systemd journal. This information is in addition to
information enabled by the lvm.conf log/journal setting. command: record
information about the command. output: record the default command output. debug:
record full command debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more
information.
--longhelp
Display long help text.
--mirrorsonly
Only remove missing PVs from mirror LVs.
--nohints
Do not use the hints file to locate devices for PVs. A command may read more
devices to find PVs when hints are not used. The command will still perform
standard hint file invalidation where appropriate.
--nolocking
Disable locking. Use with caution, concurrent commands may produce incorrect
results.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once to
also suppress any prompts with answer 'no'.
--removemissing
Removes all missing PVs from the VG, if there are no LVs allocated on them. This
resumes normal operation of the VG (new LVs may again be created, changed and so
on). If this is not possible because LVs are referencing the missing PVs, this
option can be combined with --force to have the command remove any partial LVs. In
this case, any LVs and dependent snapshots that were partly on the missing disks
are removed completely, including those parts on disks that are still present. If
LVs spanned several disks, including ones that are lost, salvaging some data first
may be possible by activating LVs in partial mode.
--reportformat basic|json
Overrides current output format for reports which is defined globally by the
report/output_format setting in lvm.conf(5). basic is the original format with
columns and rows. If there is more than one report per command, each report is
prefixed with the report name for identification. json produces report output in
JSON format. See lvmreport(7) for more information.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by
disabling all metadata writing but nevertheless returning success to the calling
function. This may lead to unusual error messages in multi-stage operations if a
tool relies on reading back metadata it believes has changed but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes. Use
with extreme caution. (For automatic no, see -qq.)
VARIABLES
VG Volume Group name. See lvm(8) for valid names.
PV Physical Volume name, a device path under /dev. For commands managing physical
extents, a PV positional arg generally accepts a suffix indicating a range (or
multiple ranges) of physical extents (PEs). When the first PE is omitted, it
defaults to the start of the device, and when the last PE is omitted it defaults to
end. Start and end range (inclusive): PV[:PE-PE]... Start and length range
(counting from 0): PV[:PE+PE]...
String See the option description for information about the string content.
Size[UNIT]
Size is an input number that accepts an optional unit. Input units are always
treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both
refer to 1024. The default input unit is specified by letter, followed by |UNIT.
UNIT represents other possible input units: b|B is bytes, s|S is sectors of 512
bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
(This should not be confused with the output control --units, where capital letters
mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm. For example,
LVM_VG_NAME can generally be substituted for a required VG parameter.
SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8),
pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8),
vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8),
vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8),
lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)