Provided by: dotnet-host-7.0_7.0.105-0ubuntu2_amd64 
dotnet run
This article applies to: ✔️ .NET Core 3.1 SDK and later versions
NAME
dotnet-run - Runs source code without any explicit compile or launch commands.
SYNOPSIS
dotnet run [-a|--arch <ARCHITECTURE>] [-c|--configuration <CONFIGURATION>]
[-f|--framework <FRAMEWORK>] [--force] [--interactive]
[--launch-profile <NAME>] [--no-build]
[--no-dependencies] [--no-launch-profile] [--no-restore]
[--os <OS>] [--project <PATH>] [-r|--runtime <RUNTIME_IDENTIFIER>]
[-v|--verbosity <LEVEL>] [[--] [application arguments]]
dotnet run -h|--help
DESCRIPTION
The dotnet run command provides a convenient option to run your application from the
source code with one command. It’s useful for fast iterative development from the command
line. The command depends on the dotnet build command to build the code. Any
requirements for the build, such as that the project must be restored first, apply to
dotnet run as well.
dotnet run doesn’t respect arguments like /property:property=value, which are
respected by dotnet build.
Output files are written into the default location, which is bin/<configuration>/<target>.
For example if you have a netcoreapp2.1 application and you run dotnet run, the output is
placed in bin/Debug/netcoreapp2.1. Files are overwritten as needed. Temporary files are
placed in the obj directory.
If the project specifies multiple frameworks, executing dotnet run results in an error
unless the -f|--framework <FRAMEWORK> option is used to specify the framework.
The dotnet run command is used in the context of projects, not built assemblies. If
you’re trying to run a framework-dependent application DLL instead, you must use dotnet
without a command. For example, to run myapp.dll, use:
dotnet myapp.dll
For more information on the dotnet driver, see the .NET Command Line Tools (CLI) topic.
To run the application, the dotnet run command resolves the dependencies of the
application that are outside of the shared runtime from the NuGet cache. Because it uses
cached dependencies, it’s not recommended to use dotnet run to run applications in
production. Instead, create a deployment using the dotnet publish command and deploy the
published output.
Implicit restore
You don’t have to run dotnet restore because it’s run implicitly by all commands that
require a restore to occur, such as dotnet new, dotnet build, dotnet run, dotnet test,
dotnet publish, and dotnet pack. To disable implicit restore, use the --no-restore
option.
The dotnet restore command is still useful in certain scenarios where explicitly restoring
makes sense, such as continuous integration builds in Azure DevOps Services or in build
systems that need to explicitly control when the restore occurs.
For information about how to manage NuGet feeds, see the dotnet restore documentation.
This command supports the dotnet restore options when passed in the long form (for
example, --source). Short form options, such as -s, are not supported.
Workload manifest downloads
When you run this command, it initiates an asynchronous background download of advertising
manifests for workloads. If the download is still running when this command finishes, the
download is stopped. For more information, see Advertising manifests.
OPTIONS
• --
Delimits arguments to dotnet run from arguments for the application being run. All
arguments after this delimiter are passed to the application run.
• -a|--arch <ARCHITECTURE>
Specifies the target architecture. This is a shorthand syntax for setting the Runtime
Identifier (RID), where the provided value is combined with the default RID. For
example, on a win-x64 machine, specifying --arch x86 sets the RID to win-x86. If you
use this option, don’t use the -r|--runtime option. Available since .NET 6 Preview 7.
• -c|--configuration <CONFIGURATION>
Defines the build configuration. The default for most projects is Debug, but you can
override the build configuration settings in your project.
• -f|--framework <FRAMEWORK>
Builds and runs the app using the specified framework. The framework must be specified
in the project file.
• --force
Forces all dependencies to be resolved even if the last restore was successful.
Specifying this flag is the same as deleting the project.assets.json file.
• -?|-h|--help
Prints out a description of how to use the command.
• --interactive
Allows the command to stop and wait for user input or action. For example, to complete
authentication. Available since .NET Core 3.0 SDK.
• --launch-profile <NAME>
The name of the launch profile (if any) to use when launching the application. Launch
profiles are defined in the launchSettings.json file and are typically called
Development, Staging, and Production. For more information, see Working with multiple
environments.
• --no-build
Doesn’t build the project before running. It also implicitly sets the --no-restore
flag.
• --no-dependencies
When restoring a project with project-to-project (P2P) references, restores the root
project and not the references.
• --no-launch-profile
Doesn’t try to use launchSettings.json to configure the application.
• --no-restore
Doesn’t execute an implicit restore when running the command.
• --os <OS>
Specifies the target operating system (OS). This is a shorthand syntax for setting the
Runtime Identifier (RID), where the provided value is combined with the default RID.
For example, on a win-x64 machine, specifying --os linux sets the RID to linux-x64. If
you use this option, don’t use the -r|--runtime option. Available since .NET 6.
• --project <PATH>
Specifies the path of the project file to run (folder name or full path). If not
specified, it defaults to the current directory.
The -p abbreviation for --project is deprecated starting in .NET 6 SDK. For a limited
time starting in .NET 6 RC1 SDK, -p can still be used for --project despite the
deprecation warning. If the argument provided for the option doesn’t contain =, the
command accepts -p as short for --project. Otherwise, the command assumes that -p is
short for --property. This flexible use of -p for --project will be phased out in .NET
7.
• --property:<NAME>=<VALUE>
Sets one or more MSBuild properties. Specify multiple properties delimited by
semicolons or by repeating the option:
--property:<NAME1>=<VALUE1>;<NAME2>=<VALUE2>
--property:<NAME1>=<VALUE1> --property:<NAME2>=<VALUE2>
The short form -p can be used for --property. If the argument provided for the option
contains =, -p is accepted as short for --property. Otherwise, the command assumes that
-p is short for --project.
To pass --property to the application rather than set an MSBuild property, provide the
option after the -- syntax separator, for example:
dotnet run -- --property name=value
• -r|--runtime <RUNTIME_IDENTIFIER>
Specifies the target runtime to restore packages for. For a list of Runtime Identifiers
(RIDs), see the RID catalog.
• -v|--verbosity <LEVEL>
Sets the verbosity level of the command. Allowed values are q[uiet], m[inimal],
n[ormal], d[etailed], and diag[nostic]. The default is minimal. For more information,
see <xref:Microsoft.Build.Framework.LoggerVerbosity>.
EXAMPLES
• Run the project in the current directory:
dotnet run
• Run the specified project:
dotnet run --project ./projects/proj1/proj1.csproj
• Run the project in the current directory, specifying Release configuration:
dotnet run --property:Configuration=Release
• Run the project in the current directory (the --help argument in this example is passed
to the application, since the blank -- option is used):
dotnet run --configuration Release -- --help
• Restore dependencies and tools for the project in the current directory only showing
minimal output and then run the project:
dotnet run --verbosity m
2022-10-10 dotnet-run(1)