Ubuntu Manpage: tpm2_pcrread(1)

NAME

       tpm2_pcrread(1) - List PCR values.

SYNOPSIS

       tpm2_pcrread [OPTIONS] PCR_LIST_OR_ALG

DESCRIPTION

       tpm2_pcrread(1) - Displays PCR values.  Without any arguments, tpm2_pcrread(1) outputs all
       PCRs and their hash banks.  One can use specify the hash algorithm or a  pcr  list  as  an
       argument to filter the output.

       To  only  output  PCR  banks  with a given algorithm, specify the hashing algorithm as the
       argument.  Algorithms should follow the “formatting  standards”,  see  section  “Algorithm
       Specifiers”.   Also,  see section “Supported Hash Algorithms” for a list of supported hash
       algorithms.

       To output a list of PCR banks (sha1, sha256, etc) and ids (0, 1,  2  etc)  specify  a  PCR
       selection list as the argument as specified via section “PCR Bank Specifiers”.

       Also read NOTES section below.

       Output  is written in a YAML format to stdout, with each algorithm followed by a PCR index
       and its value.  As a simple example assume just sha1 and sha256 support and  only  1  PCR.
       The output would be:

              $ tpm2_pcrread sha1:0+sha256:0
              sha1 :
                0  : 0000000000000000000000000000000000000003
              sha256 :
                0  : 0000000000000000000000000000000000000000000000000000000000000003

OPTIONS

       • -o, --output=FILE:

         The output file to write the PCR values in binary format, optional.

       • --cphash=FILE

         File  path  to  record  the  hash of the command parameters.  This is commonly termed as
         cpHash.  NOTE: When this option is selected, The tool  will  not  actually  execute  the
         command, it simply returns a cpHash.

       • -F, --pcrs_format=FORMAT:

         Format  selection  for  the  binary blob in the PCR output file.  `values' will output a
         binary blob of the PCR values.  `serialized' will output a binary blob of the PCR values
         in the form of serialized data structure in little endian format.  Optional.  Default is
         `values'.

COMMON OPTIONS

       This collection of options are common to many programs and provide information  that  many
       users may expect.

       • -h,  --help=[man|no-man]:  Display the tools manpage.  By default, it attempts to invoke
         the manpager for the tool, however, on failure will output a short tool  summary.   This
         is  the  same  behavior  if  the “man” option argument is specified, however if explicit
         “man” is requested, the tool will provide errors from man on stderr.   If  the  “no-man”
         option if specified, or the manpager fails, the short options will be output to stdout.

         To  successfully  use  the  manpages feature requires the manpages to be installed or on
         MANPATH, See man(1) for more details.

       • -v, --version: Display version information for this tool, supported tctis and exit.

       • -V, --verbose: Increase the information that the tool prints to the console  during  its
         execution.  When using this option the file and line number are printed.

       • -Q, --quiet: Silence normal tool output to stdout.

       • -Z, --enable-errata: Enable the application of errata fixups.  Useful if an errata fixup
         needs  to  be  applied  to  commands  sent  to  the  TPM.   Defining   the   environment
         TPM2TOOLS_ENABLE_ERRATA is equivalent.

TCTI Configuration

The TCTI or “Transmission Interface” is the communication mechanism with the TPM. TCTIs
can be changed for communication with TPMs across different mediums.

To control the TCTI, the tools respect:

1. The command line option -T or --tcti

2. The environment variable: TPM2TOOLS_TCTI.

Note: The command line option always overrides the environment variable.

The current known TCTIs are:

• tabrmd - The resource manager, called tabrmd
(https://github.com/tpm2-software/tpm2-abrmd). Note that tabrmd and abrmd as a tcti
name are synonymous.

• mssim - Typically used for communicating to the TPM software simulator.

• device - Used when talking directly to a TPM device file.

• none - Do not initalize a connection with the TPM. Some tools allow for off-tpm options
and thus support not using a TCTI. Tools that do not support it will error when
attempted to be used without a TCTI connection. Does not support ANY options and MUST
BE presented as the exact text of “none”.

The arguments to either the command line option or the environment variable are in the
form:

<tcti-name>:<tcti-option-config>

Specifying an empty string for either the <tcti-name> or <tcti-option-config> results in
the default being used for that portion respectively.

TCTI Defaults
When a TCTI is not specified, the default TCTI is searched for using dlopen(3) semantics.
The tools will search for tabrmd, device and mssim TCTIs IN THAT ORDER and USE THE FIRST
ONE FOUND. You can query what TCTI will be chosen as the default by using the -v option
to print the version information. The “default-tcti” key-value pair will indicate which
of the aforementioned TCTIs is the default.

Custom TCTIs
Any TCTI that implements the dynamic TCTI interface can be loaded. The tools internally
use dlopen(3), and the raw tcti-name value is used for the lookup. Thus, this could be a
path to the shared library, or a library name as understood by dlopen(3) semantics.

TCTI OPTIONS

This collection of options are used to configure the various known TCTI modules available:

• device: For the device TCTI, the TPM character device file for use by the device TCTI
can be specified. The default is /dev/tpm0.

Example: -T device:/dev/tpm0 or export TPM2TOOLS_TCTI=“device:/dev/tpm0”

• mssim: For the mssim TCTI, the domain name or IP address and port number used by the
simulator can be specified. The default are 127.0.0.1 and 2321.

Example: -T mssim:host=localhost,port=2321 or export
TPM2TOOLS_TCTI=“mssim:host=localhost,port=2321”

• abrmd: For the abrmd TCTI, the configuration string format is a series of simple key
value pairs separated by a `,' character. Each key and value string are separated by a
`=' character.

• TCTI abrmd supports two keys:

1. `bus_name' : The name of the tabrmd service on the bus (a string).

2. `bus_type' : The type of the dbus instance (a string) limited to `session' and
`system'.

Specify the tabrmd tcti name and a config string of bus_name=com.example.FooBar:

\--tcti=tabrmd:bus_name=com.example.FooBar

Specify the default (abrmd) tcti and a config string of bus_type=session:

\--tcti:bus_type=session

NOTE: abrmd and tabrmd are synonymous.

PCR bank specifiers

Supported Hash Algorithms

       Supported hash algorithms are:

       • 0x4 or sha1 for TPM_ALG_SHA1

       • 0xB or sha256 for TPM_ALG_SHA256 (default)

       • 0xC or sha384 for TPM_ALG_SHA384

       • 0xD or sha512 for TPM_ALG_SHA512

       • 0x12 or sm3_256 for TPM_ALG_SM3_256

       NOTE: Your TPM may not support all algorithms.

Algorithm Specifiers

Options that take algorithms support “nice-names”.

There are two major algorithm specification string classes, simple and complex. Only
certain algorithms will be accepted by the TPM, based on usage and conditions.

Simple specifiers
These are strings with no additional specification data. When creating objects, non-
specified portions of an object are assumed to defaults. You can find the list of known
“Simple Specifiers” below.

Asymmetric
• rsa

• ecc

Symmetric
• aes

• camellia

• sm4

Hashing Algorithms
• sha1

• sha256

• sha384

• sha512

• sm3_256

• sha3_256

• sha3_384

• sha3_512

Keyed Hash
• hmac

• xor

Signing Schemes
• rsassa

• rsapss

• ecdsa

• ecdaa

• ecschnorr

• sm2

Asymmetric Encryption Schemes
• oaep

• rsaes

• ecdh

Modes
• ctr

• ofb

• cbc

• cfb

• ecb

Misc
• null

Complex Specifiers
Objects, when specified for creation by the TPM, have numerous algorithms to populate in
the public data. Things like type, scheme and asymmetric details, key size, etc. Below
is the general format for specifying this data: <type>:<scheme>:<symmetric-details>

Type Specifiers
This portion of the complex algorithm specifier is required. The remaining scheme and
symmetric details will default based on the type specified and the type of the object
being created.

• aes - Default AES: aes128

• aes128<mode> - 128 bit AES with optional mode (ctr|ofb|cbc|cfb|ecb). If mode is not
specified, defaults to null.

• aes192<mode> - Same as aes128<mode>, except for a 192 bit key size.

• aes256<mode> - Same as aes128<mode>, except for a 256 bit key size.

• sm4 - Default SM4: sm4128

• sm4128 or sm4_128 <mode> - 128 bit SM4 with optional mode (ctr|ofb|cbc|cfb|ecb). If
mode is not specified, defaults to null.

• ecc - Elliptical Curve, defaults to ecc256.

• ecc192 or ecc_nist_p192 - 192 bit ECC NIST curve

• ecc224 or ecc_nist_p224 - 224 bit ECC NIST curve

• ecc256 or ecc_nist_p256 - 256 bit ECC NIST curve

• ecc384 or ecc_nist_p384 - 384 bit ECC NIST curve

• ecc521 or ecc_nist_p521 - 521 bit ECC NIST curve

• ecc_sm2 or ecc_sm2_p256 - 256 bit SM2 curve

• rsa - Default RSA: rsa2048

• rsa1024 - RSA with 1024 bit keysize.

• rsa2048 - RSA with 2048 bit keysize.

• rsa3072 - RSA with 3072 bit keysize.

• rsa4096 - RSA with 4096 bit keysize.

Scheme Specifiers
Next, is an optional field, it can be skipped.

Schemes are usually Signing Schemes or Asymmetric Encryption Schemes. Most signing
schemes take a hash algorithm directly following the signing scheme. If the hash
algorithm is missing, it defaults to sha256. Some take no arguments, and some take
multiple arguments.

Hash Optional Scheme Specifiers
These scheme specifiers are followed by a dash and a valid hash algorithm, For example:
oaep-sha256.

• oaep

• ecdh

• rsassa

• rsapss

• ecdsa

• ecschnorr

• sm2

Multiple Option Scheme Specifiers
This scheme specifier is followed by a count (max size UINT16) then followed by a dash(-)
and a valid hash algorithm. * ecdaa For example, ecdaa4-sha256. If no count is
specified, it defaults to 4.

No Option Scheme Specifiers
This scheme specifier takes NO arguments. * rsaes

Symmetric Details Specifiers
This field is optional, and defaults based on the type of object being created and it’s
attributes. Generally, any valid Symmetric specifier from the Type Specifiers list should
work. If not specified, an asymmetric objects symmetric details defaults to aes128cfb.

Examples
Create an rsa2048 key with an rsaes asymmetric encryption scheme
tpm2_create -C parent.ctx -G rsa2048:rsaes -u key.pub -r key.priv

Create an ecc256 key with an ecdaa signing scheme with a count of 4 and sha384 hash
/tpm2_create -C parent.ctx -G ecc256:ecdaa4-sha384 -u key.pub -r key.priv

EXAMPLES

   Display all PCR values
              tpm2_pcrread

   Display the PCR values with a specified bank
              tpm2_pcrread sha1

   Display the PCR values with specified banks and store in a file
              tpm2_pcrread -o pcrs sha1:16,17,18+sha256:16,17,18

   Display the supported PCR bank algorithms and exit
              tpm2_pcrread

NOTES

       The maximum number of PCR that can be dumped at once is associated with the maximum length
       of a bank.

       On most TPMs, it means that this tool can dump up to 24 PCRs at once.

Returns

       Tools can return any of the following codes:

       • 0 - Success.

       • 1 - General non-specific error.

       • 2 - Options handling error.

       • 3 - Authentication error.

       • 4 - TCTI related error.

       • 5 - Non supported scheme.  Applicable to tpm2_testparams.

BUGS

       Github Issues (https://github.com/tpm2-software/tpm2-tools/issues)

HELP

       See the Mailing List (https://lists.linuxfoundation.org/mailman/listinfo/tpm2)