Ubuntu Manpage: guestfs - Library for accessing and modifying virtual machine images

Provided by: libguestfs-dev_1.48.6-2ubuntu1_amd64

NAME

       guestfs - Library for accessing and modifying virtual machine images

SYNOPSIS

        #include <guestfs.h>

        guestfs_h *g = guestfs_create ();
        guestfs_add_drive (g, "guest.img");
        guestfs_launch (g);
        guestfs_mount (g, "/dev/sda1", "/");
        guestfs_touch (g, "/hello");
        guestfs_umount (g, "/");
        guestfs_shutdown (g);
        guestfs_close (g);

        cc prog.c -o prog -lguestfs
       or:
        cc prog.c -o prog `pkg-config libguestfs --cflags --libs`

DESCRIPTION

       Libguestfs is a library for accessing and modifying disk images and virtual machines.

       This manual page documents the C API.

       If you are looking for an introduction to libguestfs, see the web site:
       http://libguestfs.org/

       Each virt tool has its own man page (for a full list, go to "SEE ALSO" at the end of this
       file).

       Other libguestfs manual pages:

       guestfs-faq(1)
           Frequently Asked Questions (FAQ).

       guestfs-examples(3)
           Examples of using the API from C.  For examples in other languages, see "USING
           LIBGUESTFS WITH OTHER PROGRAMMING LANGUAGES" below.

       guestfs-recipes(1)
           Tips and recipes.

       guestfs-performance(1)
           Performance tips and solutions.

       libguestfs-test-tool(1)
       guestfs-testing(1)
           Help testing libguestfs.

       guestfs-building(1)
           How to build libguestfs from source.

       guestfs-hacking(1)
           Contribute code to libguestfs.

       guestfs-internals(1)
           How libguestfs works.

       guestfs-security(1)
           Security information, including CVEs affecting libguestfs.

API OVERVIEW

This section provides a gentler overview of the libguestfs API. We also try to group API
calls together, where that may not be obvious from reading about the individual calls in
the main section of this manual.

HANDLES
Before you can use libguestfs calls, you have to create a handle. Then you must add at
least one disk image to the handle, followed by launching the handle, then performing
whatever operations you want, and finally closing the handle. By convention we use the
single letter "g" for the name of the handle variable, although of course you can use any
name you want.

The general structure of all libguestfs-using programs looks like this:

guestfs_h *g = guestfs_create ();

/* Call guestfs_add_drive additional times if there are
* multiple disk images.
*/
guestfs_add_drive (g, "guest.img");

/* Most manipulation calls won't work until you've launched
* the handle 'g'. You have to do this _after_ adding drives
* and _before_ other commands.
*/
guestfs_launch (g);

/* Either: examine what partitions, LVs etc are available: */
char **partitions = guestfs_list_partitions (g);
char **logvols = guestfs_lvs (g);

/* Or: ask libguestfs to find filesystems for you: */
char **filesystems = guestfs_list_filesystems (g);

/* Or: use inspection (see INSPECTION section below). */

/* To access a filesystem in the image, you must mount it. */
guestfs_mount (g, "/dev/sda1", "/");

/* Now you can perform filesystem actions on the guest
* disk image.
*/
guestfs_touch (g, "/hello");

/* Synchronize the disk. This is the opposite of guestfs_launch. */
guestfs_shutdown (g);

/* Close and free the handle 'g'. */
guestfs_close (g);

The code above doesn't include any error checking. In real code you should check return
values carefully for errors. In general all functions that return integers return "-1" on
error, and all functions that return pointers return "NULL" on error. See section "ERROR
HANDLING" below for how to handle errors, and consult the documentation for each function
call below to see precisely how they return error indications.

The code above does not free(3) the strings and arrays returned from functions. Consult
the documentation for each function to find out how to free the return value.

See guestfs-examples(3) for fully worked examples.

DISK IMAGES
The image filename ("guest.img" in the example above) could be a disk image from a virtual
machine, a dd(1) copy of a physical hard disk, an actual block device, or simply an empty
file of zeroes that you have created through posix_fallocate(3). Libguestfs lets you do
useful things to all of these.

The call you should use in modern code for adding drives is "guestfs_add_drive_opts". To
add a disk image, allowing writes, and specifying that the format is raw, do:

guestfs_add_drive_opts (g, filename,
GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",
-1);

You can add a disk read-only using:

guestfs_add_drive_opts (g, filename,
GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",
GUESTFS_ADD_DRIVE_OPTS_READONLY, 1,
-1);

or by calling the older function "guestfs_add_drive_ro". If you use the readonly flag,
libguestfs won't modify the file. (See also "DISK IMAGE FORMATS" below).

Be extremely cautious if the disk image is in use, eg. if it is being used by a virtual
machine. Adding it read-write will almost certainly cause disk corruption, but adding it
read-only is safe.

You should usually add at least one disk image, and you may add multiple disk images. If
adding multiple disk images, they usually have to be "related", ie. from the same guest.
In the API, the disk images are usually referred to as /dev/sda (for the first one you
added), /dev/sdb (for the second one you added), etc.

Once "guestfs_launch" has been called you cannot add any more images. You can call
"guestfs_list_devices" to get a list of the device names, in the order that you added
them. See also "BLOCK DEVICE NAMING" below.

MOUNTING
Before you can read or write files, create directories and so on in a disk image that
contains filesystems, you have to mount those filesystems using "guestfs_mount" or
"guestfs_mount_ro". If you already know that a disk image contains (for example) one
partition with a filesystem on that partition, then you can mount it directly:

guestfs_mount (g, "/dev/sda1", "/");

where /dev/sda1 means literally the first partition (1) of the first disk image that we
added (/dev/sda). If the disk contains Linux LVM2 logical volumes you could refer to
those instead (eg. /dev/VG/LV). Note that these are libguestfs virtual devices, and are
nothing to do with host devices.

If you are given a disk image and you don’t know what it contains then you have to find
out. Libguestfs can do that too: use "guestfs_list_partitions" and "guestfs_lvs" to list
possible partitions and LVs, and either try mounting each to see what is mountable, or
else examine them with "guestfs_vfs_type" or "guestfs_file". To list just filesystems,
use "guestfs_list_filesystems".

Libguestfs also has a set of APIs for inspection of unknown disk images (see "INSPECTION"
below). You might also want to look at higher level programs built on top of libguestfs,
in particular virt-inspector(1).

To mount a filesystem read-only, use "guestfs_mount_ro". There are several other
variations of the "guestfs_mount_*" call.

FILESYSTEM ACCESS AND MODIFICATION
The majority of the libguestfs API consists of fairly low-level calls for accessing and
modifying the files, directories, symlinks etc on mounted filesystems. There are over a
hundred such calls which you can find listed in detail below in this man page, and we
don't even pretend to cover them all in this overview.

Specify filenames as full paths, starting with "/" and including the mount point.

For example, if you mounted a filesystem at "/" and you want to read the file called
"etc/passwd" then you could do:

char *data = guestfs_cat (g, "/etc/passwd");

This would return "data" as a newly allocated buffer containing the full content of that
file (with some conditions: see also "DOWNLOADING" below), or "NULL" if there was an
error.

As another example, to create a top-level directory on that filesystem called "var" you
would do:

guestfs_mkdir (g, "/var");

To create a symlink you could do:

guestfs_ln_s (g, "/etc/init.d/portmap",
"/etc/rc3.d/S30portmap");

Libguestfs will reject attempts to use relative paths and there is no concept of a current
working directory.

Libguestfs can return errors in many situations: for example if the filesystem isn't
writable, or if a file or directory that you requested doesn't exist. If you are using
the C API (documented here) you have to check for those error conditions after each call.
(Other language bindings turn these errors into exceptions).

File writes are affected by the per-handle umask, set by calling "guestfs_umask" and
defaulting to 022. See "UMASK".

Since libguestfs 1.18, it is possible to mount the libguestfs filesystem on a local
directory, subject to some restrictions. See "MOUNT LOCAL" below.

PARTITIONING
Libguestfs contains API calls to read, create and modify partition tables on disk images.

In the common case where you want to create a single partition covering the whole disk,
you should use the "guestfs_part_disk" call:

const char *parttype = "mbr";
if (disk_is_larger_than_2TB)
parttype = "gpt";
guestfs_part_disk (g, "/dev/sda", parttype);

Obviously this effectively wipes anything that was on that disk image before.

LVM2
Libguestfs provides access to a large part of the LVM2 API, such as "guestfs_lvcreate" and
"guestfs_vgremove". It won't make much sense unless you familiarize yourself with the
concepts of physical volumes, volume groups and logical volumes.

This author strongly recommends reading the LVM HOWTO, online at
http://tldp.org/HOWTO/LVM-HOWTO/.

DOWNLOADING
Use "guestfs_cat" to download small, text only files. This call cannot handle files
containing any ASCII NUL ("\0") characters. However the API is very simple to use.

"guestfs_read_file" can be used to read files which contain arbitrary 8 bit data, since it
returns a (pointer, size) pair.

"guestfs_download" can be used to download any file, with no limits on content or size.

To download multiple files, see "guestfs_tar_out" and "guestfs_tgz_out".

UPLOADING
To write a small file with fixed content, use "guestfs_write". To create a file of all
zeroes, use "guestfs_truncate_size" (sparse) or "guestfs_fallocate64" (with all disk
blocks allocated). There are a variety of other functions for creating test files, for
example "guestfs_fill" and "guestfs_fill_pattern".

To upload a single file, use "guestfs_upload". This call has no limits on file content or
size.

To upload multiple files, see "guestfs_tar_in" and "guestfs_tgz_in".

However the fastest way to upload large numbers of arbitrary files is to turn them into a
squashfs or CD ISO (see mksquashfs(8) and mkisofs(8)), then attach this using
"guestfs_add_drive_ro". If you add the drive in a predictable way (eg. adding it last
after all other drives) then you can get the device name from "guestfs_list_devices" and
mount it directly using "guestfs_mount_ro". Note that squashfs images are sometimes non-
portable between kernel versions, and they don't support labels or UUIDs. If you want to
pre-build an image or you need to mount it using a label or UUID, use an ISO image
instead.

COPYING
There are various different commands for copying between files and devices and in and out
of the guest filesystem. These are summarised in the table below.

file to file
Use "guestfs_cp" to copy a single file, or "guestfs_cp_a" to copy directories
recursively.

To copy part of a file (offset and size) use "guestfs_copy_file_to_file".

file to device
device to file
device to device
Use "guestfs_copy_file_to_device", "guestfs_copy_device_to_file", or
"guestfs_copy_device_to_device".

Example: duplicate the contents of an LV:

guestfs_copy_device_to_device (g,
"/dev/VG/Original", "/dev/VG/Copy",
/* -1 marks the end of the list of optional parameters */
-1);

The destination (/dev/VG/Copy) must be at least as large as the source
(/dev/VG/Original). To copy less than the whole source device, use the optional
"size" parameter:

guestfs_copy_device_to_device (g,
"/dev/VG/Original", "/dev/VG/Copy",
GUESTFS_COPY_DEVICE_TO_DEVICE_SIZE, 10000,
-1);

file on the host to file or device
Use "guestfs_upload". See "UPLOADING" above.

file or device to file on the host
Use "guestfs_download". See "DOWNLOADING" above.

UPLOADING AND DOWNLOADING TO PIPES AND FILE DESCRIPTORS
Calls like "guestfs_upload", "guestfs_download", "guestfs_tar_in", "guestfs_tar_out" etc
appear to only take filenames as arguments, so it appears you can only upload and download
to files. However many Un*x-like hosts let you use the special device files /dev/stdin,
/dev/stdout, /dev/stderr and /dev/fd/N to read and write from stdin, stdout, stderr, and
arbitrary file descriptor N.

For example, virt-cat(1) writes its output to stdout by doing:

guestfs_download (g, filename, "/dev/stdout");

and you can write tar output to a file descriptor "fd" by doing:

char devfd[64];
snprintf (devfd, sizeof devfd, "/dev/fd/%d", fd);
guestfs_tar_out (g, "/", devfd);

LISTING FILES
"guestfs_ll" is just designed for humans to read (mainly when using the
guestfish(1)-equivalent command "ll").

"guestfs_ls" is a quick way to get a list of files in a directory from programs, as a flat
list of strings.

"guestfs_readdir" is a programmatic way to get a list of files in a directory, plus
additional information about each one. It is more equivalent to using the readdir(3) call
on a local filesystem.

"guestfs_find" and "guestfs_find0" can be used to recursively list files.

RUNNING COMMANDS
Although libguestfs is primarily an API for manipulating files inside guest images, we
also provide some limited facilities for running commands inside guests.

There are many limitations to this:

• The kernel version that the command runs under will be different from what it expects.

• If the command needs to communicate with daemons, then most likely they won't be
running.

• The command will be running in limited memory.

• The network may not be available unless you enable it (see "guestfs_set_network").

• Only supports Linux guests (not Windows, BSD, etc).

• Architecture limitations (eg. won’t work for a PPC guest on an X86 host).

• For SELinux guests, you may need to relabel the guest after creating new files. See
"SELINUX" below.

• Security: It is not safe to run commands from untrusted, possibly malicious guests.
These commands may attempt to exploit your program by sending unexpected output. They
could also try to exploit the Linux kernel or qemu provided by the libguestfs
appliance. They could use the network provided by the libguestfs appliance to bypass
ordinary network partitions and firewalls. They could use the elevated privileges or
different SELinux context of your program to their advantage.

A secure alternative is to use libguestfs to install a "firstboot" script (a script
which runs when the guest next boots normally), and to have this script run the
commands you want in the normal context of the running guest, network security and so
on. For information about other security issues, see guestfs-security(1).

The two main API calls to run commands are "guestfs_command" and "guestfs_sh" (there are
also variations).

The difference is that "guestfs_sh" runs commands using the shell, so any shell globs,
redirections, etc will work.

CONFIGURATION FILES
To read and write configuration files in Linux guest filesystems, we strongly recommend
using Augeas. For example, Augeas understands how to read and write, say, a Linux shadow
password file or X.org configuration file, and so avoids you having to write that code.

The main Augeas calls are bound through the "guestfs_aug_*" APIs. We don't document
Augeas itself here because there is excellent documentation on the http://augeas.net/
website.

If you don’t want to use Augeas (you fool!) then try calling "guestfs_read_lines" to get
the file as a list of lines which you can iterate over.

SYSTEMD JOURNAL FILES
To read the systemd journal from a Linux guest, use the "guestfs_journal_*" APIs starting
with "guestfs_journal_open".

Consult the journal documentation here: sd-journal(3), sd_journal_open(3).

SELINUX
We support SELinux guests. However it is not possible to load the SELinux policy of the
guest into the appliance kernel. Therefore the strategy for dealing with SELinux guests
is to relabel them after making changes.

In libguestfs ≥ 1.34 there is a new API, "guestfs_setfiles", which can be used for this.
To properly use this API you have to parse the guest SELinux configuration. See the
virt-customize(1) module customize/SELinux_relabel.ml for how to do this.

A simpler but slower alternative is to touch /.autorelabel in the guest, which means that
the guest will relabel itself at next boot.

Libguestfs ≤ 1.32 had APIs "guestfs_set_selinux", "guestfs_get_selinux", "guestfs_setcon"
and "guestfs_getcon". These did not work properly, are deprecated, and should not be used
in new code.

UMASK
Certain calls are affected by the current file mode creation mask (the "umask"). In
particular ones which create files or directories, such as "guestfs_touch",
"guestfs_mknod" or "guestfs_mkdir". This affects either the default mode that the file is
created with or modifies the mode that you supply.

The default umask is 022, so files are created with modes such as 0644 and directories
with 0755.

There are two ways to avoid being affected by umask. Either set umask to 0 (call
"guestfs_umask (g, 0)" early after launching). Or call "guestfs_chmod" after creating
each file or directory.

For more information about umask, see umask(2).

LABELS AND UUIDS
Many filesystems, devices and logical volumes support either labels (short strings like
"BOOT" which might not be unique) and/or UUIDs (globally unique IDs).

For filesystems, use "guestfs_vfs_label" or "guestfs_vfs_uuid" to read the label or UUID.
Some filesystems let you call "guestfs_set_label" or "guestfs_set_uuid" to change the
label or UUID.

You can locate a filesystem by its label or UUID using "guestfs_findfs_label" or
"guestfs_findfs_uuid".

For LVM2 (which supports only UUIDs), there is a rich set of APIs for fetching UUIDs,
fetching UUIDs of the contained objects, and changing UUIDs. See: "guestfs_lvuuid",
"guestfs_vguuid", "guestfs_pvuuid", "guestfs_vglvuuids", "guestfs_vgpvuuids",
"guestfs_vgchange_uuid", "guestfs_vgchange_uuid_all", "guestfs_pvchange_uuid",
"guestfs_pvchange_uuid_all".

Note when cloning a filesystem, device or whole guest, it is a good idea to set new
randomly generated UUIDs on the copy.

ENCRYPTED DISKS
Libguestfs allows you to access Linux guests which have been encrypted using whole disk
encryption that conforms to the Linux Unified Key Setup (LUKS) standard. This includes
nearly all whole disk encryption systems used by modern Linux guests. Windows BitLocker
is also supported.

Use "guestfs_vfs_type" to identify encrypted block devices. For LUKS it returns the
string "crypto_LUKS". For Windows BitLocker it returns "BitLocker".

Then open these devices by calling "guestfs_cryptsetup_open". Obviously you will require
the passphrase!

Opening an encrypted device creates a new device mapper device called /dev/mapper/mapname
(where "mapname" is the string you supply to "guestfs_cryptsetup_open"). Reads and writes
to this mapper device are decrypted from and encrypted to the underlying block device
respectively.

LVM volume groups on the device can be made visible by calling "guestfs_vgscan" followed
by "guestfs_vg_activate_all". The logical volume(s) can now be mounted in the usual way.

Use the reverse process to close an encrypted device. Unmount any logical volumes on it,
deactivate the volume groups by calling "guestfs_vg_activate (g, 0, ["/dev/VG"])". Then
close the mapper device by calling "guestfs_cryptsetup_close" on the /dev/mapper/mapname
device (not the underlying encrypted block device).

MOUNT LOCAL
In libguestfs ≥ 1.18, it is possible to mount the libguestfs filesystem on a local
directory and access it using ordinary POSIX calls and programs.

Availability of this is subject to a number of restrictions: it requires FUSE (the
Filesystem in USErspace), and libfuse must also have been available when libguestfs was
compiled. FUSE may require that a kernel module is loaded, and it may be necessary to add
the current user to a special "fuse" group. See the documentation for your distribution
and http://fuse.sf.net for further information.

The call to mount the libguestfs filesystem on a local directory is "guestfs_mount_local"
(q.v.) followed by "guestfs_mount_local_run". The latter does not return until you
unmount the filesystem. The reason is that the call enters the FUSE main loop and
processes kernel requests, turning them into libguestfs calls. An alternative design
would have been to create a background thread to do this, but libguestfs doesn't require
pthreads. This way is also more flexible: for example the user can create another thread
for "guestfs_mount_local_run".

"guestfs_mount_local" needs a certain amount of time to set up the mountpoint. The
mountpoint is not ready to use until the call returns. At this point, accesses to the
filesystem will block until the main loop is entered (ie. "guestfs_mount_local_run"). So
if you need to start another process to access the filesystem, put the fork between
"guestfs_mount_local" and "guestfs_mount_local_run".

MOUNT LOCAL COMPATIBILITY

Since local mounting was only added in libguestfs 1.18, and may not be available even in
these builds, you should consider writing code so that it doesn't depend on this feature,
and can fall back to using libguestfs file system calls.

If libguestfs was compiled without support for "guestfs_mount_local" then calling it will
return an error with errno set to "ENOTSUP" (see "guestfs_last_errno").

MOUNT LOCAL PERFORMANCE

Libguestfs on top of FUSE performs quite poorly. For best performance do not use it. Use
ordinary libguestfs filesystem calls, upload, download etc. instead.

REMOTE STORAGE
CEPH

Libguestfs can access Ceph (librbd/RBD) disks.

To do this, set the optional "protocol" and "server" parameters of
"guestfs_add_drive_opts" like this:

char **servers = { "ceph1.example.org:3000", /* ... */, NULL };
guestfs_add_drive_opts (g, "pool/image",
GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",
GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "rbd",
GUESTFS_ADD_DRIVE_OPTS_SERVER, servers,
GUESTFS_ADD_DRIVE_OPTS_USERNAME, "rbduser",
GUESTFS_ADD_DRIVE_OPTS_SECRET, "AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA==",
-1);

"servers" (the "server" parameter) is a list of one or more Ceph servers. The server
string is documented in "guestfs_add_drive_opts". The "username" and "secret" parameters
are also optional, and if not given, then no authentication will be used.

An encrypted RBD disk -- directly opening which would require the "username" and "secret"
parameters -- cannot be accessed if the following conditions all hold:

• the backend is libvirt,

• the image specified by the "filename" parameter is different from the encrypted RBD
disk,

• the image specified by the "filename" parameter has qcow2 format,

• the encrypted RBD disk is specified as a backing file at some level in the qcow2
backing chain.

This limitation is due to libvirt's (justified) separate handling of disks vs. secrets.
When the RBD username and secret are provided inside a qcow2 backing file specification,
libvirt does not construct an ephemeral secret object from those, for Ceph authentication.
Refer to https://bugzilla.redhat.com/2033247.

FTP, HTTP AND TFTP

Libguestfs can access remote disks over FTP, FTPS, HTTP, HTTPS or TFTP protocols.

To do this, set the optional "protocol" and "server" parameters of
"guestfs_add_drive_opts" like this:

char **servers = { "www.example.org", NULL };
guestfs_add_drive_opts (g, "/disk.img",
GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",
GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "http",
GUESTFS_ADD_DRIVE_OPTS_SERVER, servers,
-1);

The "protocol" can be one of "ftp", "ftps", "http", "https" or "tftp".

"servers" (the "server" parameter) is a list which must have a single element. The single
element is a string defining the web, FTP or TFTP server. The format of this string is
documented in "guestfs_add_drive_opts".

GLUSTER

Libguestfs can access Gluster disks.

To do this, set the optional "protocol" and "server" parameters of
"guestfs_add_drive_opts" like this:

char **servers = { "gluster.example.org:24007", NULL };
guestfs_add_drive_opts (g, "volname/image",
GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",
GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "gluster",
GUESTFS_ADD_DRIVE_OPTS_SERVER, servers,
-1);

"servers" (the "server" parameter) is a list which must have a single element. The single
element is a string defining the Gluster server. The format of this string is documented
in "guestfs_add_drive_opts".

Note that gluster usually requires the client process (ie. libguestfs) to run as root and
will give unfathomable errors if it is not (eg. "No data available").

ISCSI

Libguestfs can access iSCSI disks remotely.

To do this, set the optional "protocol" and "server" parameters like this:

char **server = { "iscsi.example.org:3000", NULL };
guestfs_add_drive_opts (g, "target-iqn-name/lun",
GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",
GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "iscsi",
GUESTFS_ADD_DRIVE_OPTS_SERVER, server,
-1);

The "server" parameter is a list which must have a single element. The single element is
a string defining the iSCSI server. The format of this string is documented in
"guestfs_add_drive_opts".

NETWORK BLOCK DEVICE

Libguestfs can access Network Block Device (NBD) disks remotely.

To do this, set the optional "protocol" and "server" parameters of
"guestfs_add_drive_opts" like this:

char **server = { "nbd.example.org:3000", NULL };
guestfs_add_drive_opts (g, "" /* export name - see below */,
GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",
GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "nbd",
GUESTFS_ADD_DRIVE_OPTS_SERVER, server,
-1);

Notes:

• "server" is in fact a list of servers. For NBD you must always supply a list with a
single element. (Other remote protocols require zero or more than one server, hence
the requirement for this parameter to be a list).

• The "server" string is documented in "guestfs_add_drive_opts". To connect to a local
qemu-nbd instance over a Unix domain socket, use "unix:/path/to/socket".

• The "filename" parameter is the NBD export name. Use an empty string to mean the
default export. Many NBD servers, including qemu-nbd, do not support export names.

• If using qemu-nbd as your server, you should always specify the "-t" option. The
reason is that libguestfs may open several connections to the server.

• The libvirt backend requires that you set the "format" parameter of
"guestfs_add_drive_opts" accurately when you use writable NBD disks.

• The libvirt backend has a bug that stops Unix domain socket connections from working:
https://bugzilla.redhat.com/show_bug.cgi?id=922888

• The direct backend does not support readonly connections because of a bug in qemu:
https://bugs.launchpad.net/qemu/+bug/1155677

SHEEPDOG

Libguestfs can access Sheepdog disks.

To do this, set the optional "protocol" and "server" parameters of
"guestfs_add_drive_opts" like this:

char **servers = { /* optional servers ... */ NULL };
guestfs_add_drive_opts (g, "volume",
GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",
GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "sheepdog",
GUESTFS_ADD_DRIVE_OPTS_SERVER, servers,
-1);

The optional list of "servers" may be zero or more server addresses ("hostname:port").
The format of the server strings is documented in "guestfs_add_drive_opts".

SSH

Libguestfs can access disks over a Secure Shell (SSH) connection.

To do this, set the "protocol" and "server" and (optionally) "username" parameters of
"guestfs_add_drive_opts" like this:

char **server = { "remote.example.com", NULL };
guestfs_add_drive_opts (g, "/path/to/disk.img",
GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",
GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "ssh",
GUESTFS_ADD_DRIVE_OPTS_SERVER, server,
GUESTFS_ADD_DRIVE_OPTS_USERNAME, "remoteuser",
-1);

The format of the server string is documented in "guestfs_add_drive_opts".

INSPECTION
Libguestfs has APIs for inspecting an unknown disk image to find out if it contains
operating systems, an install CD or a live CD.

Add all disks belonging to the unknown virtual machine and call "guestfs_launch" in the
usual way.

Then call "guestfs_inspect_os". This function uses other libguestfs calls and certain
heuristics, and returns a list of operating systems that were found. An empty list means
none were found. A single element is the root filesystem of the operating system. For
dual- or multi-boot guests, multiple roots can be returned, each one corresponding to a
separate operating system. (Multi-boot virtual machines are extremely rare in the world
of virtualization, but since this scenario can happen, we have built libguestfs to deal
with it.)

For each root, you can then call various "guestfs_inspect_get_*" functions to get
additional details about that operating system. For example, call
"guestfs_inspect_get_type" to return the string "windows" or "linux" for Windows and
Linux-based operating systems respectively.

Un*x-like and Linux-based operating systems usually consist of several filesystems which
are mounted at boot time (for example, a separate boot partition mounted on /boot). The
inspection rules are able to detect how filesystems correspond to mount points. Call
"guestfs_inspect_get_mountpoints" to get this mapping. It might return a hash table like
this example:

/boot => /dev/sda1
/ => /dev/vg_guest/lv_root
/usr => /dev/vg_guest/lv_usr

The caller can then make calls to "guestfs_mount" to mount the filesystems as suggested.

Be careful to mount filesystems in the right order (eg. / before /usr). Sorting the keys
of the hash by length, shortest first, should work.

Inspection currently only works for some common operating systems. Contributors are
welcome to send patches for other operating systems that we currently cannot detect.

Encrypted disks must be opened before inspection. See "ENCRYPTED DISKS" for more details.
The "guestfs_inspect_os" function just ignores any encrypted devices.

A note on the implementation: The call "guestfs_inspect_os" performs inspection and caches
the results in the guest handle. Subsequent calls to "guestfs_inspect_get_*" return this
cached information, but do not re-read the disks. If you change the content of the guest
disks, you can redo inspection by calling "guestfs_inspect_os" again.
("guestfs_inspect_list_applications2" works a little differently from the other calls and
does read the disks. See documentation for that function for details).

INSPECTING INSTALL DISKS

Libguestfs (since 1.9.4) can detect some install disks, install CDs, live CDs and more.

Further information is available about the operating system that can be installed using
the regular inspection APIs like "guestfs_inspect_get_product_name",
"guestfs_inspect_get_major_version" etc.

SPECIAL CONSIDERATIONS FOR WINDOWS GUESTS
Libguestfs can mount NTFS partitions. It does this using the http://www.ntfs-3g.org/
driver.

DRIVE LETTERS AND PATHS

DOS and Windows still use drive letters, and the filesystems are always treated as case
insensitive by Windows itself, and therefore you might find a Windows configuration file
referring to a path like "c:\windows\system32". When the filesystem is mounted in
libguestfs, that directory might be referred to as /WINDOWS/System32.

Drive letter mappings can be found using inspection (see "INSPECTION" and
"guestfs_inspect_get_drive_mappings")

Dealing with separator characters (backslash vs forward slash) is outside the scope of
libguestfs, but usually a simple character replacement will work.

To resolve the case insensitivity of paths, call "guestfs_case_sensitive_path".

LONG FILENAMES ON NTFS

NTFS supports filenames up to 255 characters long. "Character" means a 2 byte UTF-16
codepoint which can encode the most common Unicode codepoints.

Most Linux filesystems support filenames up to 255 bytes. This means you may get an
error:

File name too long

when you copy a file from NTFS to a Linux filesystem if the name, when reencoded as UTF-8,
would exceed 255 bytes in length.

This will most often happen when using non-ASCII names that are longer than ~127
characters (eg. Greek, Cyrillic) or longer than ~85 characters (Asian languages).

A workaround is not to try to store such long filenames on Linux native filesystems.
Since the tar(1) format can store unlimited length filenames, keep the files in a tarball.

ACCESSING THE WINDOWS REGISTRY

Libguestfs also provides some help for decoding Windows Registry "hive" files, through a
separate C library called hivex(3).

Before libguestfs 1.19.35 you had to download the hive file, operate on it locally using
hivex, and upload it again. Since this version, we have included the major hivex APIs
directly in the libguestfs API (see "guestfs_hivex_open"). This means that if you have
opened a Windows guest, you can read and write the registry directly.

CONNECTION MANAGEMENT

   guestfs_h *
       "guestfs_h" is the opaque type representing a connection handle.  Create a handle by
       calling "guestfs_create" or "guestfs_create_flags".  Call "guestfs_close" to free the
       handle and release all resources used.

       For information on using multiple handles and threads, see the section "MULTIPLE HANDLES
       AND MULTIPLE THREADS" above.

   guestfs_create
        guestfs_h *guestfs_create (void);

       Create a connection handle.

       On success this returns a non-NULL pointer to a handle.  On error it returns NULL.

       You have to "configure" the handle after creating it.  This includes calling
       "guestfs_add_drive_opts" (or one of the equivalent calls) on the handle at least once.

       After configuring the handle, you have to call "guestfs_launch".

       You may also want to configure error handling for the handle.  See the "ERROR HANDLING"
       section below.

   guestfs_create_flags
        guestfs_h *guestfs_create_flags (unsigned flags [, ...]);

       Create a connection handle, supplying extra flags and extra arguments to control how the
       handle is created.

       On success this returns a non-NULL pointer to a handle.  On error it returns NULL.

       "guestfs_create" is equivalent to calling guestfs_create_flags(0).

       The following flags may be logically ORed together.  (Currently no extra arguments are
       used).

       "GUESTFS_CREATE_NO_ENVIRONMENT"
           Don’t parse any environment variables (such as "LIBGUESTFS_DEBUG" etc).

           You can call "guestfs_parse_environment" or "guestfs_parse_environment_list"
           afterwards to parse environment variables.  Alternately, don't call these functions if
           you want the handle to be unaffected by environment variables.  See the example below.

           The default (if this flag is not given) is to implicitly call
           "guestfs_parse_environment".

       "GUESTFS_CREATE_NO_CLOSE_ON_EXIT"
           Don’t try to close the handle in an atexit(3) handler if the program exits without
           explicitly closing the handle.

           The default (if this flag is not given) is to install such an atexit handler.

       USING "GUESTFS_CREATE_NO_ENVIRONMENT"

       You might use "GUESTFS_CREATE_NO_ENVIRONMENT" and an explicit call to
       "guestfs_parse_environment" like this:

        guestfs_h *g;
        int r;

        g = guestfs_create_flags (GUESTFS_CREATE_NO_ENVIRONMENT);
        if (!g) {
          perror ("guestfs_create_flags");
          exit (EXIT_FAILURE);
        }
        r = guestfs_parse_environment (g);
        if (r == -1)
          exit (EXIT_FAILURE);

       Or to create a handle which is unaffected by environment variables, omit the call to
       "guestfs_parse_environment" from the above code.

       The above code has another advantage which is that any errors from parsing the environment
       are passed through the error handler, whereas "guestfs_create" prints errors on stderr and
       ignores them.

   guestfs_close
        void guestfs_close (guestfs_h *g);

       This closes the connection handle and frees up all resources used.  If a close callback
       was set on the handle, then it is called.

       The correct way to close the handle is:

        if (guestfs_shutdown (g) == -1) {
          /* handle write errors here */
        }
        guestfs_close (g);

       "guestfs_shutdown" is only needed if all of the following are true:

       1.  one or more disks were added in read-write mode, and

       2.  guestfs_launch was called, and

       3.  you made some changes, and

       4.  you have a way to handle write errors (eg. by exiting with an error code or reporting
           something to the user).

ERROR HANDLING

       API functions can return errors.  For example, almost all functions that return "int" will
       return "-1" to indicate an error.

       Additional information is available for errors: an error message string and optionally an
       error number (errno) if the thing that failed was a system call.

       You can get at the additional information about the last error on the handle by calling
       "guestfs_last_error", "guestfs_last_errno", and/or by setting up an error handler with
       "guestfs_set_error_handler".

       When the handle is created, a default error handler is installed which prints the error
       message string to "stderr".  For small short-running command line programs it is
       sufficient to do:

        if (guestfs_launch (g) == -1)
          exit (EXIT_FAILURE);

       since the default error handler will ensure that an error message has been printed to
       "stderr" before the program exits.

       For other programs the caller will almost certainly want to install an alternate error
       handler or do error handling in-line as in the example below.  The non-C language bindings
       all install NULL error handlers and turn errors into exceptions using code similar to
       this:

        const char *msg;
        int errnum;

        /* This disables the default behaviour of printing errors
           on stderr. */
        guestfs_set_error_handler (g, NULL, NULL);

        if (guestfs_launch (g) == -1) {
          /* Examine the error message and print it, throw it,
             etc. */
          msg = guestfs_last_error (g);
          errnum = guestfs_last_errno (g);

          fprintf (stderr, "%s", msg);
          if (errnum != 0)
            fprintf (stderr, ": %s", strerror (errnum));
          fprintf (stderr, "\n");

          /* ... */
        }

       "guestfs_create" returns "NULL" if the handle cannot be created, and because there is no
       handle if this happens there is no way to get additional error information.  Since
       libguestfs ≥ 1.20, you can use "guestfs_create_flags" to properly deal with errors during
       handle creation, although the vast majority of programs can continue to use
       "guestfs_create" and not worry about this situation.

       Out of memory errors are handled differently.  The default action is to call abort(3).  If
       this is undesirable, then you can set a handler using "guestfs_set_out_of_memory_handler".

   guestfs_last_error
        const char *guestfs_last_error (guestfs_h *g);

       This returns the last error message that happened on "g".  If there has not been an error
       since the handle was created, then this returns "NULL".

       Note the returned string does not have a newline character at the end.  Most error
       messages are single lines.  Some are split over multiple lines and contain "\n" characters
       within the string but not at the end.

       The lifetime of the returned string is until the next error occurs on the same handle, or
       "guestfs_close" is called.  If you need to keep it longer, copy it.

   guestfs_last_errno
        int guestfs_last_errno (guestfs_h *g);

       This returns the last error number (errno) that happened on "g".

       If successful, an errno integer not equal to zero is returned.

       In many cases the special errno "ENOTSUP" is returned if you tried to call a function or
       use a feature which is not supported.

       If no error number is available, this returns 0.  This call can return 0 in three
       situations:

       1.  There has not been any error on the handle.

       2.  There has been an error but the errno was meaningless.  This corresponds to the case
           where the error did not come from a failed system call, but for some other reason.

       3.  There was an error from a failed system call, but for some reason the errno was not
           captured and returned.  This usually indicates a bug in libguestfs.

       Libguestfs tries to convert the errno from inside the appliance into a corresponding errno
       for the caller (not entirely trivial: the appliance might be running a completely
       different operating system from the library and error numbers are not standardized across
       Un*xen).  If this could not be done, then the error is translated to "EINVAL".  In
       practice this should only happen in very rare circumstances.

   guestfs_set_error_handler
        typedef void (*guestfs_error_handler_cb) (guestfs_h *g,
                                                  void *opaque,
                                                  const char *msg);
        void guestfs_set_error_handler (guestfs_h *g,
                                        guestfs_error_handler_cb cb,
                                        void *opaque);

       The callback "cb" will be called if there is an error.  The parameters passed to the
       callback are an opaque data pointer and the error message string.

       "errno" is not passed to the callback.  To get that the callback must call
       "guestfs_last_errno".

       Note that the message string "msg" is freed as soon as the callback function returns, so
       if you want to stash it somewhere you must make your own copy.

       The default handler prints messages on "stderr".

       If you set "cb" to "NULL" then no handler is called.

   guestfs_get_error_handler
        guestfs_error_handler_cb guestfs_get_error_handler (guestfs_h *g,
                                                            void **opaque_rtn);

       Returns the current error handler callback.

   guestfs_push_error_handler
        void guestfs_push_error_handler (guestfs_h *g,
                                         guestfs_error_handler_cb cb,
                                         void *opaque);

       This is the same as "guestfs_set_error_handler", except that the old error handler is
       stashed away in a stack inside the handle.  You can restore the previous error handler by
       calling "guestfs_pop_error_handler".

       Use the following code to temporarily disable errors around a function:

        guestfs_push_error_handler (g, NULL, NULL);
        guestfs_mkdir (g, "/foo"); /* We don't care if this fails. */
        guestfs_pop_error_handler (g);

   guestfs_pop_error_handler
        void guestfs_pop_error_handler (guestfs_h *g);

       Restore the previous error handler (see "guestfs_push_error_handler").

       If you pop the stack too many times, then the default error handler is restored.

   guestfs_set_out_of_memory_handler
        typedef void (*guestfs_abort_cb) (void);
        void guestfs_set_out_of_memory_handler (guestfs_h *g,
                                                guestfs_abort_cb);

       The callback "cb" will be called if there is an out of memory situation.  Note this
       callback must not return.

       The default is to call abort(3).

       You cannot set "cb" to "NULL".  You can’t ignore out of memory situations.

   guestfs_get_out_of_memory_handler
        guestfs_abort_fn guestfs_get_out_of_memory_handler (guestfs_h *g);

       This returns the current out of memory handler.

API CALLS

   guestfs_acl_delete_def_file
        int
        guestfs_acl_delete_def_file (guestfs_h *g,
                                     const char *dir);

       This function deletes the default POSIX Access Control List (ACL) attached to directory
       "dir".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "acl".  See also "guestfs_feature_available".

       (Added in 1.19.63)

   guestfs_acl_get_file
        char *
        guestfs_acl_get_file (guestfs_h *g,
                              const char *path,
                              const char *acltype);

       This function returns the POSIX Access Control List (ACL) attached to "path".  The ACL is
       returned in "long text form" (see acl(5)).

       The "acltype" parameter may be:

       "access"
           Return the ordinary (access) ACL for any file, directory or other filesystem object.

       "default"
           Return the default ACL.  Normally this only makes sense if "path" is a directory.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "acl".  See also "guestfs_feature_available".

       (Added in 1.19.63)

   guestfs_acl_set_file
        int
        guestfs_acl_set_file (guestfs_h *g,
                              const char *path,
                              const char *acltype,
                              const char *acl);

       This function sets the POSIX Access Control List (ACL) attached to "path".

       The "acltype" parameter may be:

       "access"
           Set the ordinary (access) ACL for any file, directory or other filesystem object.

       "default"
           Set the default ACL.  Normally this only makes sense if "path" is a directory.

       The "acl" parameter is the new ACL in either "long text form" or "short text form" (see
       acl(5)).  The new ACL completely replaces any previous ACL on the file.  The ACL must
       contain the full Unix permissions (eg. "u::rwx,g::rx,o::rx").

       If you are specifying individual users or groups, then the mask field is also required
       (eg. "m::rwx"), followed by the "u:ID:..." and/or "g:ID:..." field(s).  A full ACL string
       might therefore look like this:

        u::rwx,g::rwx,o::rwx,m::rwx,u:500:rwx,g:500:rwx
        \ Unix permissions / \mask/ \      ACL        /

       You should use numeric UIDs and GIDs.  To map usernames and groupnames to the correct
       numeric ID in the context of the guest, use the Augeas functions (see "guestfs_aug_init").

       This function returns 0 on success or -1 on error.

       This function depends on the feature "acl".  See also "guestfs_feature_available".

       (Added in 1.19.63)

   guestfs_add_cdrom
        int
        guestfs_add_cdrom (guestfs_h *g,
                           const char *filename);

       This function is deprecated.  In new code, use the "guestfs_add_drive_ro" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This function adds a virtual CD-ROM disk image to the guest.

       The image is added as read-only drive, so this function is equivalent of
       "guestfs_add_drive_ro".

       This function returns 0 on success or -1 on error.

       (Added in 0.3)

   guestfs_add_domain
        int
        guestfs_add_domain (guestfs_h *g,
                            const char *dom,
                            ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_ADD_DOMAIN_LIBVIRTURI, const char *libvirturi,
        GUESTFS_ADD_DOMAIN_READONLY, int readonly,
        GUESTFS_ADD_DOMAIN_IFACE, const char *iface,
        GUESTFS_ADD_DOMAIN_LIVE, int live,
        GUESTFS_ADD_DOMAIN_ALLOWUUID, int allowuuid,
        GUESTFS_ADD_DOMAIN_READONLYDISK, const char *readonlydisk,
        GUESTFS_ADD_DOMAIN_CACHEMODE, const char *cachemode,
        GUESTFS_ADD_DOMAIN_DISCARD, const char *discard,
        GUESTFS_ADD_DOMAIN_COPYONREAD, int copyonread,

       This function adds the disk(s) attached to the named libvirt domain "dom".  It works by
       connecting to libvirt, requesting the domain and domain XML from libvirt, parsing it for
       disks, and calling "guestfs_add_drive_opts" on each one.

       The number of disks added is returned.  This operation is atomic: if an error is returned,
       then no disks are added.

       This function does some minimal checks to make sure the libvirt domain is not running
       (unless "readonly" is true).  In a future version we will try to acquire the libvirt lock
       on each disk.

       Disks must be accessible locally.  This often means that adding disks from a remote
       libvirt connection (see https://libvirt.org/remote.html) will fail unless those disks are
       accessible via the same device path locally too.

       The optional "libvirturi" parameter sets the libvirt URI (see
       https://libvirt.org/uri.html).  If this is not set then we connect to the default libvirt
       URI (or one set through an environment variable, see the libvirt documentation for full
       details).

       The optional "live" flag is ignored in libguestfs ≥ 1.48.

       If the "allowuuid" flag is true (default is false) then a UUID may be passed instead of
       the domain name.  The "dom" string is treated as a UUID first and looked up, and if that
       lookup fails then we treat "dom" as a name as usual.

       The optional "readonlydisk" parameter controls what we do for disks which are marked
       <readonly/> in the libvirt XML.  Possible values are:

       readonlydisk = "error"
           If "readonly" is false:

           The whole call is aborted with an error if any disk with the <readonly/> flag is
           found.

           If "readonly" is true:

           Disks with the <readonly/> flag are added read-only.

       readonlydisk = "read"
           If "readonly" is false:

           Disks with the <readonly/> flag are added read-only.  Other disks are added
           read/write.

           If "readonly" is true:

           Disks with the <readonly/> flag are added read-only.

       readonlydisk = "write" (default)
           If "readonly" is false:

           Disks with the <readonly/> flag are added read/write.

           If "readonly" is true:

           Disks with the <readonly/> flag are added read-only.

       readonlydisk = "ignore"
           If "readonly" is true or false:

           Disks with the <readonly/> flag are skipped.

       If present, the value of "logical_block_size" attribute of <blockio/> tag in libvirt XML
       will be passed as "blocksize" parameter to "guestfs_add_drive_opts".

       The other optional parameters are passed directly through to "guestfs_add_drive_opts".

       On error this function returns -1.

       (Added in 1.7.4)

   guestfs_add_domain_va
        int
        guestfs_add_domain_va (guestfs_h *g,
                               const char *dom,
                               va_list args);

       This is the "va_list variant" of "guestfs_add_domain".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_add_domain_argv
        int
        guestfs_add_domain_argv (guestfs_h *g,
                                 const char *dom,
                                 const struct guestfs_add_domain_argv *optargs);

       This is the "argv variant" of "guestfs_add_domain".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_add_drive
        int
        guestfs_add_drive (guestfs_h *g,
                           const char *filename);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_add_drive_opts" with no optional arguments.

       (Added in 0.3)

   guestfs_add_drive_opts
        int
        guestfs_add_drive_opts (guestfs_h *g,
                                const char *filename,
                                ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_ADD_DRIVE_OPTS_READONLY, int readonly,
        GUESTFS_ADD_DRIVE_OPTS_FORMAT, const char *format,
        GUESTFS_ADD_DRIVE_OPTS_IFACE, const char *iface,
        GUESTFS_ADD_DRIVE_OPTS_NAME, const char *name,
        GUESTFS_ADD_DRIVE_OPTS_LABEL, const char *label,
        GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, const char *protocol,
        GUESTFS_ADD_DRIVE_OPTS_SERVER, char *const *server,
        GUESTFS_ADD_DRIVE_OPTS_USERNAME, const char *username,
        GUESTFS_ADD_DRIVE_OPTS_SECRET, const char *secret,
        GUESTFS_ADD_DRIVE_OPTS_CACHEMODE, const char *cachemode,
        GUESTFS_ADD_DRIVE_OPTS_DISCARD, const char *discard,
        GUESTFS_ADD_DRIVE_OPTS_COPYONREAD, int copyonread,
        GUESTFS_ADD_DRIVE_OPTS_BLOCKSIZE, int blocksize,

       This function adds a disk image called filename to the handle.  filename may be a regular
       host file or a host device.

       When this function is called before "guestfs_launch" (the usual case) then the first time
       you call this function, the disk appears in the API as /dev/sda, the second time as
       /dev/sdb, and so on.

       You don't necessarily need to be root when using libguestfs.  However you obviously do
       need sufficient permissions to access the filename for whatever operations you want to
       perform (ie. read access if you just want to read the image or write access if you want to
       modify the image).

       This call checks that filename exists.

       filename may be the special string "/dev/null".  See "NULL DISKS".

       The optional arguments are:

       "readonly"
           If true then the image is treated as read-only.  Writes are still allowed, but they
           are stored in a temporary snapshot overlay which is discarded at the end.  The disk
           that you add is not modified.

       "format"
           This forces the image format.  If you omit this (or use "guestfs_add_drive" or
           "guestfs_add_drive_ro") then the format is automatically detected.  Possible formats
           include "raw" and "qcow2".

           Automatic detection of the format opens you up to a potential security hole when
           dealing with untrusted raw-format images.  See CVE-2010-3851 and RHBZ#642934.
           Specifying the format closes this security hole.

       "iface"
           This rarely-used option lets you emulate the behaviour of the deprecated
           "guestfs_add_drive_with_if" call (q.v.)

       "name"
           This field used to be passed as a hint for guest inspection, but it is no longer used.

       "label"
           Give the disk a label.  The label should be a unique, short string using only ASCII
           characters "[a-zA-Z]".  As well as its usual name in the API (such as /dev/sda), the
           drive will also be named /dev/disk/guestfs/label.

           See "DISK LABELS".

       "protocol"
           The optional protocol argument can be used to select an alternate source protocol.

           See also: "REMOTE STORAGE".

           "protocol = "file""
               filename is interpreted as a local file or device.  This is the default if the
               optional protocol parameter is omitted.

           "protocol = "ftp"|"ftps"|"http"|"https"|"tftp""
               Connect to a remote FTP, HTTP or TFTP server.  The "server" parameter must also be
               supplied - see below.

               See also: "FTP, HTTP AND TFTP"

           "protocol = "gluster""
               Connect to the GlusterFS server.  The "server" parameter must also be supplied -
               see below.

               See also: "GLUSTER"

           "protocol = "iscsi""
               Connect to the iSCSI server.  The "server" parameter must also be supplied - see
               below.  The "username" parameter may be supplied.  See below.  The "secret"
               parameter may be supplied.  See below.

               See also: "ISCSI".

           "protocol = "nbd""
               Connect to the Network Block Device server.  The "server" parameter must also be
               supplied - see below.

               See also: "NETWORK BLOCK DEVICE".

           "protocol = "rbd""
               Connect to the Ceph (librbd/RBD) server.  The "server" parameter must also be
               supplied - see below.  The "username" parameter may be supplied.  See below.  The
               "secret" parameter may be supplied.  See below.

               See also: "CEPH".

           "protocol = "sheepdog""
               Connect to the Sheepdog server.  The "server" parameter may also be supplied - see
               below.

               See also: "SHEEPDOG".

           "protocol = "ssh""
               Connect to the Secure Shell (ssh) server.

               The "server" parameter must be supplied.  The "username" parameter may be
               supplied.  See below.

               See also: "SSH".

       "server"
           For protocols which require access to a remote server, this is a list of server(s).

            Protocol       Number of servers required
            --------       --------------------------
            file           List must be empty or param not used at all
            ftp|ftps|http|https|tftp  Exactly one
            gluster        Exactly one
            iscsi          Exactly one
            nbd            Exactly one
            rbd            Zero or more
            sheepdog       Zero or more
            ssh            Exactly one

           Each list element is a string specifying a server.  The string must be in one of the
           following formats:

            hostname
            hostname:port
            tcp:hostname
            tcp:hostname:port
            unix:/path/to/socket

           If the port number is omitted, then the standard port number for the protocol is used
           (see /etc/services).

       "username"
           For the "ftp", "ftps", "http", "https", "iscsi", "rbd", "ssh" and "tftp" protocols,
           this specifies the remote username.

           If not given, then the local username is used for "ssh", and no authentication is
           attempted for ceph.  But note this sometimes may give unexpected results, for example
           if using the libvirt backend and if the libvirt backend is configured to start the
           qemu appliance as a special user such as "qemu.qemu".  If in doubt, specify the remote
           username you want.

       "secret"
           For the "rbd" protocol only, this specifies the ‘secret’ to use when connecting to the
           remote device.  It must be base64 encoded.

           If not given, then a secret matching the given username will be looked up in the
           default keychain locations, or if no username is given, then no authentication will be
           used.

       "cachemode"
           Choose whether or not libguestfs will obey sync operations (safe but slow) or not
           (unsafe but fast).  The possible values for this string are:

           "cachemode = "writeback""
               This is the default.

               Write operations in the API do not return until a write(2) call has completed in
               the host [but note this does not imply that anything gets written to disk].

               Sync operations in the API, including implicit syncs caused by filesystem
               journalling, will not return until an fdatasync(2) call has completed in the host,
               indicating that data has been committed to disk.

           "cachemode = "unsafe""
               In this mode, there are no guarantees.  Libguestfs may cache anything and ignore
               sync requests.  This is suitable only for scratch or temporary disks.

       "discard"
           Enable or disable discard (a.k.a. trim or unmap) support on this drive.  If enabled,
           operations such as "guestfs_fstrim" will be able to discard / make thin / punch holes
           in the underlying host file or device.

           Possible discard settings are:

           "discard = "disable""
               Disable discard support.  This is the default.

           "discard = "enable""
               Enable discard support.  Fail if discard is not possible.

           "discard = "besteffort""
               Enable discard support if possible, but don't fail if it is not supported.

               Since not all backends and not all underlying systems support discard, this is a
               good choice if you want to use discard if possible, but don't mind if it doesn't
               work.

       "copyonread"
           The boolean parameter "copyonread" enables copy-on-read support.  This only affects
           disk formats which have backing files, and causes reads to be stored in the overlay
           layer, speeding up multiple reads of the same area of disk.

           The default is false.

       "blocksize"
           This parameter sets the sector size of the disk.  Possible values are 512 (the default
           if the parameter is omitted) or 4096.  Use 4096 when handling an "Advanced Format"
           disk that uses 4K sector size (https://en.wikipedia.org/wiki/Advanced_Format).

           Only a subset of the backends support this parameter (currently only the libvirt and
           direct backends do).

       This function returns 0 on success or -1 on error.

       (Added in 0.3)

   guestfs_add_drive_opts_va
        int
        guestfs_add_drive_opts_va (guestfs_h *g,
                                   const char *filename,
                                   va_list args);

       This is the "va_list variant" of "guestfs_add_drive_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_add_drive_opts_argv
        int
        guestfs_add_drive_opts_argv (guestfs_h *g,
                                     const char *filename,
                                     const struct guestfs_add_drive_opts_argv *optargs);

       This is the "argv variant" of "guestfs_add_drive_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_add_drive_ro
        int
        guestfs_add_drive_ro (guestfs_h *g,
                              const char *filename);

       This function is the equivalent of calling "guestfs_add_drive_opts" with the optional
       parameter "GUESTFS_ADD_DRIVE_OPTS_READONLY" set to 1, so the disk is added read-only, with
       the format being detected automatically.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.38)

   guestfs_add_drive_ro_with_if
        int
        guestfs_add_drive_ro_with_if (guestfs_h *g,
                                      const char *filename,
                                      const char *iface);

       This function is deprecated.  In new code, use the "guestfs_add_drive" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This is the same as "guestfs_add_drive_ro" but it allows you to specify the QEMU interface
       emulation to use at run time.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.84)

   guestfs_add_drive_scratch
        int
        guestfs_add_drive_scratch (guestfs_h *g,
                                   int64_t size,
                                   ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_ADD_DRIVE_SCRATCH_NAME, const char *name,
        GUESTFS_ADD_DRIVE_SCRATCH_LABEL, const char *label,
        GUESTFS_ADD_DRIVE_SCRATCH_BLOCKSIZE, int blocksize,

       This command adds a temporary scratch drive to the handle.  The "size" parameter is the
       virtual size (in bytes).  The scratch drive is blank initially (all reads return zeroes
       until you start writing to it).  The drive is deleted when the handle is closed.

       The optional arguments "name", "label" and "blocksize" are passed through to
       "guestfs_add_drive_opts".

       This function returns 0 on success or -1 on error.

       (Added in 1.23.10)

   guestfs_add_drive_scratch_va
        int
        guestfs_add_drive_scratch_va (guestfs_h *g,
                                      int64_t size,
                                      va_list args);

       This is the "va_list variant" of "guestfs_add_drive_scratch".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_add_drive_scratch_argv
        int
        guestfs_add_drive_scratch_argv (guestfs_h *g,
                                        int64_t size,
                                        const struct guestfs_add_drive_scratch_argv *optargs);

       This is the "argv variant" of "guestfs_add_drive_scratch".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_add_drive_with_if
        int
        guestfs_add_drive_with_if (guestfs_h *g,
                                   const char *filename,
                                   const char *iface);

       This function is deprecated.  In new code, use the "guestfs_add_drive" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This is the same as "guestfs_add_drive" but it allows you to specify the QEMU interface
       emulation to use at run time.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.84)

   guestfs_add_libvirt_dom
        int
        guestfs_add_libvirt_dom (guestfs_h *g,
                                 void * /* really virDomainPtr */ dom,
                                 ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_ADD_LIBVIRT_DOM_READONLY, int readonly,
        GUESTFS_ADD_LIBVIRT_DOM_IFACE, const char *iface,
        GUESTFS_ADD_LIBVIRT_DOM_LIVE, int live,
        GUESTFS_ADD_LIBVIRT_DOM_READONLYDISK, const char *readonlydisk,
        GUESTFS_ADD_LIBVIRT_DOM_CACHEMODE, const char *cachemode,
        GUESTFS_ADD_LIBVIRT_DOM_DISCARD, const char *discard,
        GUESTFS_ADD_LIBVIRT_DOM_COPYONREAD, int copyonread,

       This function adds the disk(s) attached to the libvirt domain "dom".  It works by
       requesting the domain XML from libvirt, parsing it for disks, and calling
       "guestfs_add_drive_opts" on each one.

       In the C API we declare "void *dom", but really it has type "virDomainPtr dom".  This is
       so we don't need <libvirt.h>.

       The number of disks added is returned.  This operation is atomic: if an error is returned,
       then no disks are added.

       This function does some minimal checks to make sure the libvirt domain is not running
       (unless "readonly" is true).  In a future version we will try to acquire the libvirt lock
       on each disk.

       Disks must be accessible locally.  This often means that adding disks from a remote
       libvirt connection (see https://libvirt.org/remote.html) will fail unless those disks are
       accessible via the same device path locally too.

       The optional "live" flag is ignored in libguestfs ≥ 1.48.

       The optional "readonlydisk" parameter controls what we do for disks which are marked
       <readonly/> in the libvirt XML.  See "guestfs_add_domain" for possible values.

       If present, the value of "logical_block_size" attribute of <blockio/> tag in libvirt XML
       will be passed as "blocksize" parameter to "guestfs_add_drive_opts".

       The other optional parameters are passed directly through to "guestfs_add_drive_opts".

       On error this function returns -1.

       (Added in 1.29.14)

   guestfs_add_libvirt_dom_va
        int
        guestfs_add_libvirt_dom_va (guestfs_h *g,
                                    void * /* really virDomainPtr */ dom,
                                    va_list args);

       This is the "va_list variant" of "guestfs_add_libvirt_dom".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_add_libvirt_dom_argv
        int
        guestfs_add_libvirt_dom_argv (guestfs_h *g,
                                      void * /* really virDomainPtr */ dom,
                                      const struct guestfs_add_libvirt_dom_argv *optargs);

       This is the "argv variant" of "guestfs_add_libvirt_dom".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_aug_clear
        int
        guestfs_aug_clear (guestfs_h *g,
                           const char *augpath);

       Set the value associated with "path" to "NULL".  This is the same as the augtool(1)
       "clear" command.

       This function returns 0 on success or -1 on error.

       (Added in 1.3.4)

   guestfs_aug_close
        int
        guestfs_aug_close (guestfs_h *g);

       Close the current Augeas handle and free up any resources used by it.  After calling this,
       you have to call "guestfs_aug_init" again before you can use any other Augeas functions.

       This function returns 0 on success or -1 on error.

       (Added in 0.7)

   guestfs_aug_defnode
        struct guestfs_int_bool *
        guestfs_aug_defnode (guestfs_h *g,
                             const char *name,
                             const char *expr,
                             const char *val);

       Defines a variable "name" whose value is the result of evaluating "expr".

       If "expr" evaluates to an empty nodeset, a node is created, equivalent to calling
       "guestfs_aug_set" "expr", "val".  "name" will be the nodeset containing that single node.

       On success this returns a pair containing the number of nodes in the nodeset, and a
       boolean flag if a node was created.

       This function returns a "struct guestfs_int_bool *", or NULL if there was an error.  The
       caller must call "guestfs_free_int_bool" after use.

       (Added in 0.7)

   guestfs_aug_defvar
        int
        guestfs_aug_defvar (guestfs_h *g,
                            const char *name,
                            const char *expr);

       Defines an Augeas variable "name" whose value is the result of evaluating "expr".  If
       "expr" is NULL, then "name" is undefined.

       On success this returns the number of nodes in "expr", or 0 if "expr" evaluates to
       something which is not a nodeset.

       On error this function returns -1.

       (Added in 0.7)

   guestfs_aug_get
        char *
        guestfs_aug_get (guestfs_h *g,
                         const char *augpath);

       Look up the value associated with "path".  If "path" matches exactly one node, the "value"
       is returned.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 0.7)

   guestfs_aug_init
        int
        guestfs_aug_init (guestfs_h *g,
                          const char *root,
                          int flags);

       Create a new Augeas handle for editing configuration files.  If there was any previous
       Augeas handle associated with this guestfs session, then it is closed.

       You must call this before using any other "guestfs_aug_*" commands.

       "root" is the filesystem root.  "root" must not be NULL, use / instead.

       The flags are the same as the flags defined in <augeas.h>, the logical or of the following
       integers:

       "AUG_SAVE_BACKUP" = 1
           Keep the original file with a ".augsave" extension.

       "AUG_SAVE_NEWFILE" = 2
           Save changes into a file with extension ".augnew", and do not overwrite original.
           Overrides "AUG_SAVE_BACKUP".

       "AUG_TYPE_CHECK" = 4
           Typecheck lenses.

           This option is only useful when debugging Augeas lenses.  Use of this option may
           require additional memory for the libguestfs appliance.  You may need to set the
           "LIBGUESTFS_MEMSIZE" environment variable or call "guestfs_set_memsize".

       "AUG_NO_STDINC" = 8
           Do not use standard load path for modules.

       "AUG_SAVE_NOOP" = 16
           Make save a no-op, just record what would have been changed.

       "AUG_NO_LOAD" = 32
           Do not load the tree in "guestfs_aug_init".

       To close the handle, you can call "guestfs_aug_close".

       To find out more about Augeas, see http://augeas.net/.

       This function returns 0 on success or -1 on error.

       (Added in 0.7)

   guestfs_aug_insert
        int
        guestfs_aug_insert (guestfs_h *g,
                            const char *augpath,
                            const char *label,
                            int before);

       Create a new sibling "label" for "path", inserting it into the tree before or after "path"
       (depending on the boolean flag "before").

       "path" must match exactly one existing node in the tree, and "label" must be a label, ie.
       not contain /, "*" or end with a bracketed index "[N]".

       This function returns 0 on success or -1 on error.

       (Added in 0.7)

   guestfs_aug_label
        char *
        guestfs_aug_label (guestfs_h *g,
                           const char *augpath);

       The label (name of the last element) of the Augeas path expression "augpath" is returned.
       "augpath" must match exactly one node, else this function returns an error.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.23.14)

   guestfs_aug_load
        int
        guestfs_aug_load (guestfs_h *g);

       Load files into the tree.

       See "aug_load" in the Augeas documentation for the full gory details.

       This function returns 0 on success or -1 on error.

       (Added in 0.7)

   guestfs_aug_ls
        char **
        guestfs_aug_ls (guestfs_h *g,
                        const char *augpath);

       This is just a shortcut for listing "guestfs_aug_match" "path/*" and sorting the resulting
       nodes into alphabetical order.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 0.8)

   guestfs_aug_match
        char **
        guestfs_aug_match (guestfs_h *g,
                           const char *augpath);

       Returns a list of paths which match the path expression "path".  The returned paths are
       sufficiently qualified so that they match exactly one node in the current tree.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 0.7)

   guestfs_aug_mv
        int
        guestfs_aug_mv (guestfs_h *g,
                        const char *src,
                        const char *dest);

       Move the node "src" to "dest".  "src" must match exactly one node.  "dest" is overwritten
       if it exists.

       This function returns 0 on success or -1 on error.

       (Added in 0.7)

   guestfs_aug_rm
        int
        guestfs_aug_rm (guestfs_h *g,
                        const char *augpath);

       Remove "path" and all of its children.

       On success this returns the number of entries which were removed.

       On error this function returns -1.

       (Added in 0.7)

   guestfs_aug_save
        int
        guestfs_aug_save (guestfs_h *g);

       This writes all pending changes to disk.

       The flags which were passed to "guestfs_aug_init" affect exactly how files are saved.

       This function returns 0 on success or -1 on error.

       (Added in 0.7)

   guestfs_aug_set
        int
        guestfs_aug_set (guestfs_h *g,
                         const char *augpath,
                         const char *val);

       Set the value associated with "augpath" to "val".

       In the Augeas API, it is possible to clear a node by setting the value to NULL.  Due to an
       oversight in the libguestfs API you cannot do that with this call.  Instead you must use
       the "guestfs_aug_clear" call.

       This function returns 0 on success or -1 on error.

       (Added in 0.7)

   guestfs_aug_setm
        int
        guestfs_aug_setm (guestfs_h *g,
                          const char *base,
                          const char *sub,
                          const char *val);

       Change multiple Augeas nodes in a single operation.  "base" is an expression matching
       multiple nodes.  "sub" is a path expression relative to "base".  All nodes matching "base"
       are found, and then for each node, "sub" is changed to "val".  "sub" may also be "NULL" in
       which case the "base" nodes are modified.

       This returns the number of nodes modified.

       On error this function returns -1.

       (Added in 1.23.14)

   guestfs_aug_transform
        int
        guestfs_aug_transform (guestfs_h *g,
                               const char *lens,
                               const char *file,
                               ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_AUG_TRANSFORM_REMOVE, int remove,

       Add an Augeas transformation for the specified "lens" so it can handle "file".

       If "remove" is true ("false" by default), then the transformation is removed.

       This function returns 0 on success or -1 on error.

       (Added in 1.35.2)

   guestfs_aug_transform_va
        int
        guestfs_aug_transform_va (guestfs_h *g,
                                  const char *lens,
                                  const char *file,
                                  va_list args);

       This is the "va_list variant" of "guestfs_aug_transform".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_aug_transform_argv
        int
        guestfs_aug_transform_argv (guestfs_h *g,
                                    const char *lens,
                                    const char *file,
                                    const struct guestfs_aug_transform_argv *optargs);

       This is the "argv variant" of "guestfs_aug_transform".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_available
        int
        guestfs_available (guestfs_h *g,
                           char *const *groups);

       This command is used to check the availability of some groups of functionality in the
       appliance, which not all builds of the libguestfs appliance will be able to provide.

       The libguestfs groups, and the functions that those groups correspond to, are listed in
       "AVAILABILITY".  You can also fetch this list at runtime by calling
       "guestfs_available_all_groups".

       The argument "groups" is a list of group names, eg: "["inotify", "augeas"]" would check
       for the availability of the Linux inotify functions and Augeas (configuration file
       editing) functions.

       The command returns no error if all requested groups are available.

       It fails with an error if one or more of the requested groups is unavailable in the
       appliance.

       If an unknown group name is included in the list of groups then an error is always
       returned.

       Notes:

       •   "guestfs_feature_available" is the same as this call, but with a slightly simpler to
           use API: that call returns a boolean true/false instead of throwing an error.

       •   You must call "guestfs_launch" before calling this function.

           The reason is because we don't know what groups are supported by the appliance/daemon
           until it is running and can be queried.

       •   If a group of functions is available, this does not necessarily mean that they will
           work.  You still have to check for errors when calling individual API functions even
           if they are available.

       •   It is usually the job of distro packagers to build complete functionality into the
           libguestfs appliance.  Upstream libguestfs, if built from source with all requirements
           satisfied, will support everything.

       •   This call was added in version 1.0.80.  In previous versions of libguestfs all you
           could do would be to speculatively execute a command to find out if the daemon
           implemented it.  See also "guestfs_version".

       See also "guestfs_filesystem_available".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.80)

   guestfs_available_all_groups
        char **
        guestfs_available_all_groups (guestfs_h *g);

       This command returns a list of all optional groups that this daemon knows about.  Note
       this returns both supported and unsupported groups.  To find out which ones the daemon can
       actually support you have to call "guestfs_available" / "guestfs_feature_available" on
       each member of the returned list.

       See also "guestfs_available", "guestfs_feature_available" and "AVAILABILITY".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.3.15)

   guestfs_base64_in
        int
        guestfs_base64_in (guestfs_h *g,
                           const char *base64file,
                           const char *filename);

       This command uploads base64-encoded data from "base64file" to filename.

       This function returns 0 on success or -1 on error.

       (Added in 1.3.5)

   guestfs_base64_out
        int
        guestfs_base64_out (guestfs_h *g,
                            const char *filename,
                            const char *base64file);

       This command downloads the contents of filename, writing it out to local file "base64file"
       encoded as base64.

       This function returns 0 on success or -1 on error.

       (Added in 1.3.5)

   guestfs_blkdiscard
        int
        guestfs_blkdiscard (guestfs_h *g,
                            const char *device);

       This discards all blocks on the block device "device", giving the free space back to the
       host.

       This operation requires support in libguestfs, the host filesystem, qemu and the host
       kernel.  If this support isn't present it may give an error or even appear to run but do
       nothing.  You must also set the "discard" attribute on the underlying drive (see
       "guestfs_add_drive_opts").

       This function returns 0 on success or -1 on error.

       This function depends on the feature "blkdiscard".  See also "guestfs_feature_available".

       (Added in 1.25.44)

   guestfs_blkdiscardzeroes
        int
        guestfs_blkdiscardzeroes (guestfs_h *g,
                                  const char *device);

       This call returns true if blocks on "device" that have been discarded by a call to
       "guestfs_blkdiscard" are returned as blocks of zero bytes when read the next time.

       If it returns false, then it may be that discarded blocks are read as stale or random
       data.

       This function returns a C truth value on success or -1 on error.

       This function depends on the feature "blkdiscardzeroes".  See also
       "guestfs_feature_available".

       (Added in 1.25.44)

   guestfs_blkid
        char **
        guestfs_blkid (guestfs_h *g,
                       const char *device);

       This command returns block device attributes for "device". The following fields are
       usually present in the returned hash. Other fields may also be present.

       "UUID"
           The uuid of this device.

       "LABEL"
           The label of this device.

       "VERSION"
           The version of blkid command.

       "TYPE"
           The filesystem type or RAID of this device.

       "USAGE"
           The usage of this device, for example "filesystem" or "raid".

       This function returns a NULL-terminated array of strings, or NULL if there was an error.
       The array of strings will always have length "2n+1", where "n" keys and values alternate,
       followed by the trailing NULL entry.  The caller must free the strings and the array after
       use.

       (Added in 1.15.9)

   guestfs_blockdev_flushbufs
        int
        guestfs_blockdev_flushbufs (guestfs_h *g,
                                    const char *device);

       This tells the kernel to flush internal buffers associated with "device".

       This uses the blockdev(8) command.

       This function returns 0 on success or -1 on error.

       (Added in 1.9.3)

   guestfs_blockdev_getbsz
        int
        guestfs_blockdev_getbsz (guestfs_h *g,
                                 const char *device);

       This returns the block size of a device.

       Note: this is different from both size in blocks and filesystem block size.  Also this
       setting is not really used by anything.  You should probably not use it for anything.
       Filesystems have their own idea about what block size to choose.

       This uses the blockdev(8) command.

       On error this function returns -1.

       (Added in 1.9.3)

   guestfs_blockdev_getro
        int
        guestfs_blockdev_getro (guestfs_h *g,
                                const char *device);

       Returns a boolean indicating if the block device is read-only (true if read-only, false if
       not).

       This uses the blockdev(8) command.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.9.3)

   guestfs_blockdev_getsize64
        int64_t
        guestfs_blockdev_getsize64 (guestfs_h *g,
                                    const char *device);

       This returns the size of the device in bytes.

       See also "guestfs_blockdev_getsz".

       This uses the blockdev(8) command.

       On error this function returns -1.

       (Added in 1.9.3)

   guestfs_blockdev_getss
        int
        guestfs_blockdev_getss (guestfs_h *g,
                                const char *device);

       This returns the size of sectors on a block device.  Usually 512, but can be larger for
       modern devices.

       (Note, this is not the size in sectors, use "guestfs_blockdev_getsz" for that).

       This uses the blockdev(8) command.

       On error this function returns -1.

       (Added in 1.9.3)

   guestfs_blockdev_getsz
        int64_t
        guestfs_blockdev_getsz (guestfs_h *g,
                                const char *device);

       This returns the size of the device in units of 512-byte sectors (even if the sectorsize
       isn't 512 bytes ... weird).

       See also "guestfs_blockdev_getss" for the real sector size of the device, and
       "guestfs_blockdev_getsize64" for the more useful size in bytes.

       This uses the blockdev(8) command.

       On error this function returns -1.

       (Added in 1.9.3)

   guestfs_blockdev_rereadpt
        int
        guestfs_blockdev_rereadpt (guestfs_h *g,
                                   const char *device);

       Reread the partition table on "device".

       This uses the blockdev(8) command.

       This function returns 0 on success or -1 on error.

       (Added in 1.9.3)

   guestfs_blockdev_setbsz
        int
        guestfs_blockdev_setbsz (guestfs_h *g,
                                 const char *device,
                                 int blocksize);

       This function is deprecated.  There is no replacement.  Consult the API documentation in
       guestfs(3) for further information.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This call does nothing and has never done anything because of a bug in blockdev.  Do not
       use it.

       If you need to set the filesystem block size, use the "blocksize" option of
       "guestfs_mkfs".

       This function returns 0 on success or -1 on error.

       (Added in 1.9.3)

   guestfs_blockdev_setra
        int
        guestfs_blockdev_setra (guestfs_h *g,
                                const char *device,
                                int sectors);

       Set readahead (in 512-byte sectors) for the device.

       This uses the blockdev(8) command.

       This function returns 0 on success or -1 on error.

       (Added in 1.29.10)

   guestfs_blockdev_setro
        int
        guestfs_blockdev_setro (guestfs_h *g,
                                const char *device);

       Sets the block device named "device" to read-only.

       This uses the blockdev(8) command.

       This function returns 0 on success or -1 on error.

       (Added in 1.9.3)

   guestfs_blockdev_setrw
        int
        guestfs_blockdev_setrw (guestfs_h *g,
                                const char *device);

       Sets the block device named "device" to read-write.

       This uses the blockdev(8) command.

       This function returns 0 on success or -1 on error.

       (Added in 1.9.3)

   guestfs_btrfs_balance_cancel
        int
        guestfs_btrfs_balance_cancel (guestfs_h *g,
                                      const char *path);

       Cancel a running balance on a btrfs filesystem.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.22)

   guestfs_btrfs_balance_pause
        int
        guestfs_btrfs_balance_pause (guestfs_h *g,
                                     const char *path);

       Pause a running balance on a btrfs filesystem.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.22)

   guestfs_btrfs_balance_resume
        int
        guestfs_btrfs_balance_resume (guestfs_h *g,
                                      const char *path);

       Resume a paused balance on a btrfs filesystem.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.22)

   guestfs_btrfs_balance_status
        struct guestfs_btrfsbalance *
        guestfs_btrfs_balance_status (guestfs_h *g,
                                      const char *path);

       Show the status of a running or paused balance on a btrfs filesystem.

       This function returns a "struct guestfs_btrfsbalance *", or NULL if there was an error.
       The caller must call "guestfs_free_btrfsbalance" after use.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.26)

   guestfs_btrfs_device_add
        int
        guestfs_btrfs_device_add (guestfs_h *g,
                                  char *const *devices,
                                  const char *fs);

       Add the list of device(s) in "devices" to the btrfs filesystem mounted at "fs".  If
       "devices" is an empty list, this does nothing.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.35)

   guestfs_btrfs_device_delete
        int
        guestfs_btrfs_device_delete (guestfs_h *g,
                                     char *const *devices,
                                     const char *fs);

       Remove the "devices" from the btrfs filesystem mounted at "fs".  If "devices" is an empty
       list, this does nothing.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.35)

   guestfs_btrfs_filesystem_balance
        int
        guestfs_btrfs_filesystem_balance (guestfs_h *g,
                                          const char *fs);

       Balance the chunks in the btrfs filesystem mounted at "fs" across the underlying devices.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.35)

   guestfs_btrfs_filesystem_defragment
        int
        guestfs_btrfs_filesystem_defragment (guestfs_h *g,
                                             const char *path,
                                             ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_BTRFS_FILESYSTEM_DEFRAGMENT_FLUSH, int flush,
        GUESTFS_BTRFS_FILESYSTEM_DEFRAGMENT_COMPRESS, const char *compress,

       Defragment a file or directory on a btrfs filesystem. compress is one of zlib or lzo.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.22)

   guestfs_btrfs_filesystem_defragment_va
        int
        guestfs_btrfs_filesystem_defragment_va (guestfs_h *g,
                                                const char *path,
                                                va_list args);

       This is the "va_list variant" of "guestfs_btrfs_filesystem_defragment".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfs_filesystem_defragment_argv
        int
        guestfs_btrfs_filesystem_defragment_argv (guestfs_h *g,
                                                  const char *path,
                                                  const struct guestfs_btrfs_filesystem_defragment_argv *optargs);

       This is the "argv variant" of "guestfs_btrfs_filesystem_defragment".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfs_filesystem_resize
        int
        guestfs_btrfs_filesystem_resize (guestfs_h *g,
                                         const char *mountpoint,
                                         ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_BTRFS_FILESYSTEM_RESIZE_SIZE, int64_t size,

       This command resizes a btrfs filesystem.

       Note that unlike other resize calls, the filesystem has to be mounted and the parameter is
       the mountpoint not the device (this is a requirement of btrfs itself).

       The optional parameters are:

       "size"
           The new size (in bytes) of the filesystem.  If omitted, the filesystem is resized to
           the maximum size.

       See also btrfs(8).

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.11.17)

   guestfs_btrfs_filesystem_resize_va
        int
        guestfs_btrfs_filesystem_resize_va (guestfs_h *g,
                                            const char *mountpoint,
                                            va_list args);

       This is the "va_list variant" of "guestfs_btrfs_filesystem_resize".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfs_filesystem_resize_argv
        int
        guestfs_btrfs_filesystem_resize_argv (guestfs_h *g,
                                              const char *mountpoint,
                                              const struct guestfs_btrfs_filesystem_resize_argv *optargs);

       This is the "argv variant" of "guestfs_btrfs_filesystem_resize".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfs_filesystem_show
        char **
        guestfs_btrfs_filesystem_show (guestfs_h *g,
                                       const char *device);

       Show all the devices where the filesystems in "device" is spanned over.

       If not all the devices for the filesystems are present, then this function fails and the
       "errno" is set to "ENODEV".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.33.29)

   guestfs_btrfs_filesystem_sync
        int
        guestfs_btrfs_filesystem_sync (guestfs_h *g,
                                       const char *fs);

       Force sync on the btrfs filesystem mounted at "fs".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.35)

   guestfs_btrfs_fsck
        int
        guestfs_btrfs_fsck (guestfs_h *g,
                            const char *device,
                            ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_BTRFS_FSCK_SUPERBLOCK, int64_t superblock,
        GUESTFS_BTRFS_FSCK_REPAIR, int repair,

       Used to check a btrfs filesystem, "device" is the device file where the filesystem is
       stored.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.43)

   guestfs_btrfs_fsck_va
        int
        guestfs_btrfs_fsck_va (guestfs_h *g,
                               const char *device,
                               va_list args);

       This is the "va_list variant" of "guestfs_btrfs_fsck".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfs_fsck_argv
        int
        guestfs_btrfs_fsck_argv (guestfs_h *g,
                                 const char *device,
                                 const struct guestfs_btrfs_fsck_argv *optargs);

       This is the "argv variant" of "guestfs_btrfs_fsck".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfs_image
        int
        guestfs_btrfs_image (guestfs_h *g,
                             char *const *source,
                             const char *image,
                             ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_BTRFS_IMAGE_COMPRESSLEVEL, int compresslevel,

       This is used to create an image of a btrfs filesystem.  All data will be zeroed, but
       metadata and the like is preserved.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.32)

   guestfs_btrfs_image_va
        int
        guestfs_btrfs_image_va (guestfs_h *g,
                                char *const *source,
                                const char *image,
                                va_list args);

       This is the "va_list variant" of "guestfs_btrfs_image".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfs_image_argv
        int
        guestfs_btrfs_image_argv (guestfs_h *g,
                                  char *const *source,
                                  const char *image,
                                  const struct guestfs_btrfs_image_argv *optargs);

       This is the "argv variant" of "guestfs_btrfs_image".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfs_qgroup_assign
        int
        guestfs_btrfs_qgroup_assign (guestfs_h *g,
                                     const char *src,
                                     const char *dst,
                                     const char *path);

       Add qgroup "src" to parent qgroup "dst". This command can group several qgroups into a
       parent qgroup to share common limit.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.17)

   guestfs_btrfs_qgroup_create
        int
        guestfs_btrfs_qgroup_create (guestfs_h *g,
                                     const char *qgroupid,
                                     const char *subvolume);

       Create a quota group (qgroup) for subvolume at "subvolume".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.17)

   guestfs_btrfs_qgroup_destroy
        int
        guestfs_btrfs_qgroup_destroy (guestfs_h *g,
                                      const char *qgroupid,
                                      const char *subvolume);

       Destroy a quota group.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.17)

   guestfs_btrfs_qgroup_limit
        int
        guestfs_btrfs_qgroup_limit (guestfs_h *g,
                                    const char *subvolume,
                                    int64_t size);

       Limit the size of the subvolume with path "subvolume".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.17)

   guestfs_btrfs_qgroup_remove
        int
        guestfs_btrfs_qgroup_remove (guestfs_h *g,
                                     const char *src,
                                     const char *dst,
                                     const char *path);

       Remove qgroup "src" from the parent qgroup "dst".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.17)

   guestfs_btrfs_qgroup_show
        struct guestfs_btrfsqgroup_list *
        guestfs_btrfs_qgroup_show (guestfs_h *g,
                                   const char *path);

       Show all subvolume quota groups in a btrfs filesystem, including their usages.

       This function returns a "struct guestfs_btrfsqgroup_list *", or NULL if there was an
       error.  The caller must call "guestfs_free_btrfsqgroup_list" after use.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.17)

   guestfs_btrfs_quota_enable
        int
        guestfs_btrfs_quota_enable (guestfs_h *g,
                                    const char *fs,
                                    int enable);

       Enable or disable subvolume quota support for filesystem which contains "path".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.17)

   guestfs_btrfs_quota_rescan
        int
        guestfs_btrfs_quota_rescan (guestfs_h *g,
                                    const char *fs);

       Trash all qgroup numbers and scan the metadata again with the current config.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.17)

   guestfs_btrfs_replace
        int
        guestfs_btrfs_replace (guestfs_h *g,
                               const char *srcdev,
                               const char *targetdev,
                               const char *mntpoint);

       Replace device of a btrfs filesystem. On a live filesystem, duplicate the data to the
       target device which is currently stored on the source device.  After completion of the
       operation, the source device is wiped out and removed from the filesystem.

       The "targetdev" needs to be same size or larger than the "srcdev". Devices which are
       currently mounted are never allowed to be used as the "targetdev".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.48)

   guestfs_btrfs_rescue_chunk_recover
        int
        guestfs_btrfs_rescue_chunk_recover (guestfs_h *g,
                                            const char *device);

       Recover the chunk tree of btrfs filesystem by scanning the devices one by one.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.22)

   guestfs_btrfs_rescue_super_recover
        int
        guestfs_btrfs_rescue_super_recover (guestfs_h *g,
                                            const char *device);

       Recover bad superblocks from good copies.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.22)

   guestfs_btrfs_scrub_cancel
        int
        guestfs_btrfs_scrub_cancel (guestfs_h *g,
                                    const char *path);

       Cancel a running scrub on a btrfs filesystem.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.22)

   guestfs_btrfs_scrub_resume
        int
        guestfs_btrfs_scrub_resume (guestfs_h *g,
                                    const char *path);

       Resume a previously canceled or interrupted scrub on a btrfs filesystem.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.22)

   guestfs_btrfs_scrub_start
        int
        guestfs_btrfs_scrub_start (guestfs_h *g,
                                   const char *path);

       Reads all the data and metadata on the filesystem, and uses checksums and the duplicate
       copies from RAID storage to identify and repair any corrupt data.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.22)

   guestfs_btrfs_scrub_status
        struct guestfs_btrfsscrub *
        guestfs_btrfs_scrub_status (guestfs_h *g,
                                    const char *path);

       Show status of running or finished scrub on a btrfs filesystem.

       This function returns a "struct guestfs_btrfsscrub *", or NULL if there was an error.  The
       caller must call "guestfs_free_btrfsscrub" after use.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.26)

   guestfs_btrfs_set_seeding
        int
        guestfs_btrfs_set_seeding (guestfs_h *g,
                                   const char *device,
                                   int seeding);

       Enable or disable the seeding feature of a device that contains a btrfs filesystem.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.43)

   guestfs_btrfs_subvolume_create
        int
        guestfs_btrfs_subvolume_create (guestfs_h *g,
                                        const char *dest);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_btrfs_subvolume_create_opts" with no optional arguments.

       (Added in 1.17.35)

   guestfs_btrfs_subvolume_create_opts
        int
        guestfs_btrfs_subvolume_create_opts (guestfs_h *g,
                                             const char *dest,
                                             ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_BTRFS_SUBVOLUME_CREATE_OPTS_QGROUPID, const char *qgroupid,

       Create a btrfs subvolume.  The "dest" argument is the destination directory and the name
       of the subvolume, in the form /path/to/dest/name.  The optional parameter "qgroupid"
       represents the qgroup which the newly created subvolume will be added to.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.35)

   guestfs_btrfs_subvolume_create_opts_va
        int
        guestfs_btrfs_subvolume_create_opts_va (guestfs_h *g,
                                                const char *dest,
                                                va_list args);

       This is the "va_list variant" of "guestfs_btrfs_subvolume_create_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfs_subvolume_create_opts_argv
        int
        guestfs_btrfs_subvolume_create_opts_argv (guestfs_h *g,
                                                  const char *dest,
                                                  const struct guestfs_btrfs_subvolume_create_opts_argv *optargs);

       This is the "argv variant" of "guestfs_btrfs_subvolume_create_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfs_subvolume_delete
        int
        guestfs_btrfs_subvolume_delete (guestfs_h *g,
                                        const char *subvolume);

       Delete the named btrfs subvolume or snapshot.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.35)

   guestfs_btrfs_subvolume_get_default
        int64_t
        guestfs_btrfs_subvolume_get_default (guestfs_h *g,
                                             const char *fs);

       Get the default subvolume or snapshot of a filesystem mounted at "mountpoint".

       On error this function returns -1.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.17)

   guestfs_btrfs_subvolume_list
        struct guestfs_btrfssubvolume_list *
        guestfs_btrfs_subvolume_list (guestfs_h *g,
                                      const char *fs);

       List the btrfs snapshots and subvolumes of the btrfs filesystem which is mounted at "fs".

       This function returns a "struct guestfs_btrfssubvolume_list *", or NULL if there was an
       error.  The caller must call "guestfs_free_btrfssubvolume_list" after use.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.35)

   guestfs_btrfs_subvolume_set_default
        int
        guestfs_btrfs_subvolume_set_default (guestfs_h *g,
                                             int64_t id,
                                             const char *fs);

       Set the subvolume of the btrfs filesystem "fs" which will be mounted by default.  See
       "guestfs_btrfs_subvolume_list" to get a list of subvolumes.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.35)

   guestfs_btrfs_subvolume_show
        char **
        guestfs_btrfs_subvolume_show (guestfs_h *g,
                                      const char *subvolume);

       Return detailed information of the subvolume.

       This function returns a NULL-terminated array of strings, or NULL if there was an error.
       The array of strings will always have length "2n+1", where "n" keys and values alternate,
       followed by the trailing NULL entry.  The caller must free the strings and the array after
       use.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.17)

   guestfs_btrfs_subvolume_snapshot
        int
        guestfs_btrfs_subvolume_snapshot (guestfs_h *g,
                                          const char *source,
                                          const char *dest);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_btrfs_subvolume_snapshot_opts" with no optional arguments.

       (Added in 1.17.35)

   guestfs_btrfs_subvolume_snapshot_opts
        int
        guestfs_btrfs_subvolume_snapshot_opts (guestfs_h *g,
                                               const char *source,
                                               const char *dest,
                                               ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_BTRFS_SUBVOLUME_SNAPSHOT_OPTS_RO, int ro,
        GUESTFS_BTRFS_SUBVOLUME_SNAPSHOT_OPTS_QGROUPID, const char *qgroupid,

       Create a snapshot of the btrfs subvolume "source".  The "dest" argument is the destination
       directory and the name of the snapshot, in the form /path/to/dest/name. By default the
       newly created snapshot is writable, if the value of optional parameter "ro" is true, then
       a readonly snapshot is created. The optional parameter "qgroupid" represents the qgroup
       which the newly created snapshot will be added to.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.35)

   guestfs_btrfs_subvolume_snapshot_opts_va
        int
        guestfs_btrfs_subvolume_snapshot_opts_va (guestfs_h *g,
                                                  const char *source,
                                                  const char *dest,
                                                  va_list args);

       This is the "va_list variant" of "guestfs_btrfs_subvolume_snapshot_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfs_subvolume_snapshot_opts_argv
        int
        guestfs_btrfs_subvolume_snapshot_opts_argv (guestfs_h *g,
                                                    const char *source,
                                                    const char *dest,
                                                    const struct guestfs_btrfs_subvolume_snapshot_opts_argv *optargs);

       This is the "argv variant" of "guestfs_btrfs_subvolume_snapshot_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_btrfstune_enable_extended_inode_refs
        int
        guestfs_btrfstune_enable_extended_inode_refs (guestfs_h *g,
                                                      const char *device);

       This will Enable extended inode refs.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.29)

   guestfs_btrfstune_enable_skinny_metadata_extent_refs
        int
        guestfs_btrfstune_enable_skinny_metadata_extent_refs (guestfs_h *g,
                                                              const char *device);

       This enable skinny metadata extent refs.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.29)

   guestfs_btrfstune_seeding
        int
        guestfs_btrfstune_seeding (guestfs_h *g,
                                   const char *device,
                                   int seeding);

       Enable seeding of a btrfs device, this will force a fs readonly so that you can use it to
       build other filesystems.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.29.29)

   guestfs_c_pointer
        int64_t
        guestfs_c_pointer (guestfs_h *g);

       In non-C language bindings, this allows you to retrieve the underlying C pointer to the
       handle (ie. "guestfs_h *").  The purpose of this is to allow other libraries to interwork
       with libguestfs.

       On error this function returns -1.

       (Added in 1.29.17)

   guestfs_canonical_device_name
        char *
        guestfs_canonical_device_name (guestfs_h *g,
                                       const char *device);

       This utility function is useful when displaying device names to the user.  It takes a
       number of irregular device names and returns them in a consistent format:

       /dev/hdX
       /dev/vdX
           These are returned as /dev/sdX.  Note this works for device names and partition names.
           This is approximately the reverse of the algorithm described in "BLOCK DEVICE NAMING".

       /dev/mapper/VG-LV
       /dev/dm-N
           Converted to /dev/VG/LV form using "guestfs_lvm_canonical_lv_name".

       Other strings are returned unmodified.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.19.7)

   guestfs_cap_get_file
        char *
        guestfs_cap_get_file (guestfs_h *g,
                              const char *path);

       This function returns the Linux capabilities attached to "path".  The capabilities set is
       returned in text form (see cap_to_text(3)).

       If no capabilities are attached to a file, an empty string is returned.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "linuxcaps".  See also "guestfs_feature_available".

       (Added in 1.19.63)

   guestfs_cap_set_file
        int
        guestfs_cap_set_file (guestfs_h *g,
                              const char *path,
                              const char *cap);

       This function sets the Linux capabilities attached to "path".  The capabilities set "cap"
       should be passed in text form (see cap_from_text(3)).

       This function returns 0 on success or -1 on error.

       This function depends on the feature "linuxcaps".  See also "guestfs_feature_available".

       (Added in 1.19.63)

   guestfs_case_sensitive_path
        char *
        guestfs_case_sensitive_path (guestfs_h *g,
                                     const char *path);

       This can be used to resolve case insensitive paths on a filesystem which is case
       sensitive.  The use case is to resolve paths which you have read from Windows
       configuration files or the Windows Registry, to the true path.

       The command handles a peculiarity of the Linux ntfs-3g filesystem driver (and probably
       others), which is that although the underlying filesystem is case-insensitive, the driver
       exports the filesystem to Linux as case-sensitive.

       One consequence of this is that special directories such as C:\windows may appear as
       /WINDOWS or /windows (or other things) depending on the precise details of how they were
       created.  In Windows itself this would not be a problem.

       Bug or feature?  You decide: https://www.tuxera.com/community/ntfs-3g-faq/#posixfilenames1

       "guestfs_case_sensitive_path" attempts to resolve the true case of each element in the
       path. It will return a resolved path if either the full path or its parent directory
       exists. If the parent directory exists but the full path does not, the case of the parent
       directory will be correctly resolved, and the remainder appended unmodified. For example,
       if the file "/Windows/System32/netkvm.sys" exists:

       "guestfs_case_sensitive_path" ("/windows/system32/netkvm.sys")
           "Windows/System32/netkvm.sys"

       "guestfs_case_sensitive_path" ("/windows/system32/NoSuchFile")
           "Windows/System32/NoSuchFile"

       "guestfs_case_sensitive_path" ("/windows/system33/netkvm.sys")
           ERROR

       Note: Because of the above behaviour, "guestfs_case_sensitive_path" cannot be used to
       check for the existence of a file.

       Note: This function does not handle drive names, backslashes etc.

       See also "guestfs_realpath".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.75)

   guestfs_cat
        char *
        guestfs_cat (guestfs_h *g,
                     const char *path);

       Return the contents of the file named "path".

       Because, in C, this function returns a "char *", there is no way to differentiate between
       a "\0" character in a file and end of string.  To handle binary files, use the
       "guestfs_read_file" or "guestfs_download" functions.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 0.4)

   guestfs_checksum
        char *
        guestfs_checksum (guestfs_h *g,
                          const char *csumtype,
                          const char *path);

       This call computes the MD5, SHAx or CRC checksum of the file named "path".

       The type of checksum to compute is given by the "csumtype" parameter which must have one
       of the following values:

       "crc"
           Compute the cyclic redundancy check (CRC) specified by POSIX for the "cksum" command.

       "md5"
           Compute the MD5 hash (using the md5sum(1) program).

       "sha1"
           Compute the SHA1 hash (using the sha1sum(1) program).

       "sha224"
           Compute the SHA224 hash (using the sha224sum(1) program).

       "sha256"
           Compute the SHA256 hash (using the sha256sum(1) program).

       "sha384"
           Compute the SHA384 hash (using the sha384sum(1) program).

       "sha512"
           Compute the SHA512 hash (using the sha512sum(1) program).

       The checksum is returned as a printable string.

       To get the checksum for a device, use "guestfs_checksum_device".

       To get the checksums for many files, use "guestfs_checksums_out".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.2)

   guestfs_checksum_device
        char *
        guestfs_checksum_device (guestfs_h *g,
                                 const char *csumtype,
                                 const char *device);

       This call computes the MD5, SHAx or CRC checksum of the contents of the device named
       "device".  For the types of checksums supported see the "guestfs_checksum" command.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.3.2)

   guestfs_checksums_out
        int
        guestfs_checksums_out (guestfs_h *g,
                               const char *csumtype,
                               const char *directory,
                               const char *sumsfile);

       This command computes the checksums of all regular files in directory and then emits a
       list of those checksums to the local output file "sumsfile".

       This can be used for verifying the integrity of a virtual machine.  However to be properly
       secure you should pay attention to the output of the checksum command (it uses the ones
       from GNU coreutils).  In particular when the filename is not printable, coreutils uses a
       special backslash syntax.  For more information, see the GNU coreutils info file.

       This function returns 0 on success or -1 on error.

       (Added in 1.3.7)

   guestfs_chmod
        int
        guestfs_chmod (guestfs_h *g,
                       int mode,
                       const char *path);

       Change the mode (permissions) of "path" to "mode".  Only numeric modes are supported.

       Note: When using this command from guestfish, "mode" by default would be decimal, unless
       you prefix it with 0 to get octal, ie. use 0700 not 700.

       The mode actually set is affected by the umask.

       This function returns 0 on success or -1 on error.

       (Added in 0.8)

   guestfs_chown
        int
        guestfs_chown (guestfs_h *g,
                       int owner,
                       int group,
                       const char *path);

       Change the file owner to "owner" and group to "group".

       Only numeric uid and gid are supported.  If you want to use names, you will need to locate
       and parse the password file yourself (Augeas support makes this relatively easy).

       This function returns 0 on success or -1 on error.

       (Added in 0.8)

   guestfs_clear_backend_setting
        int
        guestfs_clear_backend_setting (guestfs_h *g,
                                       const char *name);

       If there is a backend setting string matching "name" or beginning with "name=", then that
       string is removed from the backend settings.

       This call returns the number of strings which were removed (which may be 0, 1 or greater
       than 1).

       See "BACKEND", "BACKEND SETTINGS".

       On error this function returns -1.

       (Added in 1.27.2)

   guestfs_command
        char *
        guestfs_command (guestfs_h *g,
                         char *const *arguments);

       This call runs a command from the guest filesystem.  The filesystem must be mounted, and
       must contain a compatible operating system (ie. something Linux, with the same or
       compatible processor architecture).

       The single parameter is an argv-style list of arguments.  The first element is the name of
       the program to run.  Subsequent elements are parameters.  The list must be non-empty (ie.
       must contain a program name).  Note that the command runs directly, and is not invoked via
       the shell (see "guestfs_sh").

       The return value is anything printed to stdout by the command.

       If the command returns a non-zero exit status, then this function returns an error
       message.  The error message string is the content of stderr from the command.

       The $PATH environment variable will contain at least /usr/bin and /bin.  If you require a
       program from another location, you should provide the full path in the first parameter.

       Shared libraries and data files required by the program must be available on filesystems
       which are mounted in the correct places.  It is the caller’s responsibility to ensure all
       filesystems that are needed are mounted at the right locations.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.9.1)

   guestfs_command_lines
        char **
        guestfs_command_lines (guestfs_h *g,
                               char *const *arguments);

       This is the same as "guestfs_command", but splits the result into a list of lines.

       See also: "guestfs_sh_lines"

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.9.1)

   guestfs_compress_device_out
        int
        guestfs_compress_device_out (guestfs_h *g,
                                     const char *ctype,
                                     const char *device,
                                     const char *zdevice,
                                     ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_COMPRESS_DEVICE_OUT_LEVEL, int level,

       This command compresses "device" and writes it out to the local file "zdevice".

       The "ctype" and optional "level" parameters have the same meaning as in
       "guestfs_compress_out".

       This function returns 0 on success or -1 on error.

       (Added in 1.13.15)

   guestfs_compress_device_out_va
        int
        guestfs_compress_device_out_va (guestfs_h *g,
                                        const char *ctype,
                                        const char *device,
                                        const char *zdevice,
                                        va_list args);

       This is the "va_list variant" of "guestfs_compress_device_out".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_compress_device_out_argv
        int
        guestfs_compress_device_out_argv (guestfs_h *g,
                                          const char *ctype,
                                          const char *device,
                                          const char *zdevice,
                                          const struct guestfs_compress_device_out_argv *optargs);

       This is the "argv variant" of "guestfs_compress_device_out".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_compress_out
        int
        guestfs_compress_out (guestfs_h *g,
                              const char *ctype,
                              const char *file,
                              const char *zfile,
                              ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_COMPRESS_OUT_LEVEL, int level,

       This command compresses file and writes it out to the local file zfile.

       The compression program used is controlled by the "ctype" parameter.  Currently this
       includes: "compress", "gzip", "bzip2", "xz" or "lzop".  Some compression types may not be
       supported by particular builds of libguestfs, in which case you will get an error
       containing the substring "not supported".

       The optional "level" parameter controls compression level.  The meaning and default for
       this parameter depends on the compression program being used.

       This function returns 0 on success or -1 on error.

       (Added in 1.13.15)

   guestfs_compress_out_va
        int
        guestfs_compress_out_va (guestfs_h *g,
                                 const char *ctype,
                                 const char *file,
                                 const char *zfile,
                                 va_list args);

       This is the "va_list variant" of "guestfs_compress_out".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_compress_out_argv
        int
        guestfs_compress_out_argv (guestfs_h *g,
                                   const char *ctype,
                                   const char *file,
                                   const char *zfile,
                                   const struct guestfs_compress_out_argv *optargs);

       This is the "argv variant" of "guestfs_compress_out".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_config
        int
        guestfs_config (guestfs_h *g,
                        const char *hvparam,
                        const char *hvvalue);

       This can be used to add arbitrary hypervisor parameters of the form -param value.
       Actually it’s not quite arbitrary - we prevent you from setting some parameters which
       would interfere with parameters that we use.

       The first character of "hvparam" string must be a "-" (dash).

       "hvvalue" can be NULL.

       This function returns 0 on success or -1 on error.

       (Added in 0.3)

   guestfs_copy_attributes
        int
        guestfs_copy_attributes (guestfs_h *g,
                                 const char *src,
                                 const char *dest,
                                 ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_COPY_ATTRIBUTES_ALL, int all,
        GUESTFS_COPY_ATTRIBUTES_MODE, int mode,
        GUESTFS_COPY_ATTRIBUTES_XATTRIBUTES, int xattributes,
        GUESTFS_COPY_ATTRIBUTES_OWNERSHIP, int ownership,

       Copy the attributes of a path (which can be a file or a directory) to another path.

       By default no attribute is copied, so make sure to specify any (or "all" to copy
       everything).

       The optional arguments specify which attributes can be copied:

       "mode"
           Copy part of the file mode from "source" to "destination". Only the UNIX permissions
           and the sticky/setuid/setgid bits can be copied.

       "xattributes"
           Copy the Linux extended attributes (xattrs) from "source" to "destination".  This flag
           does nothing if the linuxxattrs feature is not available (see
           "guestfs_feature_available").

       "ownership"
           Copy the owner uid and the group gid of "source" to "destination".

       "all"
           Copy all the attributes from "source" to "destination". Enabling it enables all the
           other flags, if they are not specified already.

       This function returns 0 on success or -1 on error.

       (Added in 1.25.21)

   guestfs_copy_attributes_va
        int
        guestfs_copy_attributes_va (guestfs_h *g,
                                    const char *src,
                                    const char *dest,
                                    va_list args);

       This is the "va_list variant" of "guestfs_copy_attributes".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_copy_attributes_argv
        int
        guestfs_copy_attributes_argv (guestfs_h *g,
                                      const char *src,
                                      const char *dest,
                                      const struct guestfs_copy_attributes_argv *optargs);

       This is the "argv variant" of "guestfs_copy_attributes".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_copy_device_to_device
        int
        guestfs_copy_device_to_device (guestfs_h *g,
                                       const char *src,
                                       const char *dest,
                                       ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_COPY_DEVICE_TO_DEVICE_SRCOFFSET, int64_t srcoffset,
        GUESTFS_COPY_DEVICE_TO_DEVICE_DESTOFFSET, int64_t destoffset,
        GUESTFS_COPY_DEVICE_TO_DEVICE_SIZE, int64_t size,
        GUESTFS_COPY_DEVICE_TO_DEVICE_SPARSE, int sparse,
        GUESTFS_COPY_DEVICE_TO_DEVICE_APPEND, int append,

       The four calls "guestfs_copy_device_to_device", "guestfs_copy_device_to_file",
       "guestfs_copy_file_to_device", and "guestfs_copy_file_to_file" let you copy from a source
       (device|file) to a destination (device|file).

       Partial copies can be made since you can specify optionally the source offset, destination
       offset and size to copy.  These values are all specified in bytes.  If not given, the
       offsets both default to zero, and the size defaults to copying as much as possible until
       we hit the end of the source.

       The source and destination may be the same object.  However overlapping regions may not be
       copied correctly.

       If the destination is a file, it is created if required.  If the destination file is not
       large enough, it is extended.

       If the destination is a file and the "append" flag is not set, then the destination file
       is truncated.  If the "append" flag is set, then the copy appends to the destination file.
       The "append" flag currently cannot be set for devices.

       If the "sparse" flag is true then the call avoids writing blocks that contain only zeroes,
       which can help in some situations where the backing disk is thin-provisioned.  Note that
       unless the target is already zeroed, using this option will result in incorrect copying.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.13.25)

   guestfs_copy_device_to_device_va
        int
        guestfs_copy_device_to_device_va (guestfs_h *g,
                                          const char *src,
                                          const char *dest,
                                          va_list args);

       This is the "va_list variant" of "guestfs_copy_device_to_device".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_copy_device_to_device_argv
        int
        guestfs_copy_device_to_device_argv (guestfs_h *g,
                                            const char *src,
                                            const char *dest,
                                            const struct guestfs_copy_device_to_device_argv *optargs);

       This is the "argv variant" of "guestfs_copy_device_to_device".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_copy_device_to_file
        int
        guestfs_copy_device_to_file (guestfs_h *g,
                                     const char *src,
                                     const char *dest,
                                     ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_COPY_DEVICE_TO_FILE_SRCOFFSET, int64_t srcoffset,
        GUESTFS_COPY_DEVICE_TO_FILE_DESTOFFSET, int64_t destoffset,
        GUESTFS_COPY_DEVICE_TO_FILE_SIZE, int64_t size,
        GUESTFS_COPY_DEVICE_TO_FILE_SPARSE, int sparse,
        GUESTFS_COPY_DEVICE_TO_FILE_APPEND, int append,

       See "guestfs_copy_device_to_device" for a general overview of this call.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.13.25)

   guestfs_copy_device_to_file_va
        int
        guestfs_copy_device_to_file_va (guestfs_h *g,
                                        const char *src,
                                        const char *dest,
                                        va_list args);

       This is the "va_list variant" of "guestfs_copy_device_to_file".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_copy_device_to_file_argv
        int
        guestfs_copy_device_to_file_argv (guestfs_h *g,
                                          const char *src,
                                          const char *dest,
                                          const struct guestfs_copy_device_to_file_argv *optargs);

       This is the "argv variant" of "guestfs_copy_device_to_file".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_copy_file_to_device
        int
        guestfs_copy_file_to_device (guestfs_h *g,
                                     const char *src,
                                     const char *dest,
                                     ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_COPY_FILE_TO_DEVICE_SRCOFFSET, int64_t srcoffset,
        GUESTFS_COPY_FILE_TO_DEVICE_DESTOFFSET, int64_t destoffset,
        GUESTFS_COPY_FILE_TO_DEVICE_SIZE, int64_t size,
        GUESTFS_COPY_FILE_TO_DEVICE_SPARSE, int sparse,
        GUESTFS_COPY_FILE_TO_DEVICE_APPEND, int append,

       See "guestfs_copy_device_to_device" for a general overview of this call.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.13.25)

   guestfs_copy_file_to_device_va
        int
        guestfs_copy_file_to_device_va (guestfs_h *g,
                                        const char *src,
                                        const char *dest,
                                        va_list args);

       This is the "va_list variant" of "guestfs_copy_file_to_device".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_copy_file_to_device_argv
        int
        guestfs_copy_file_to_device_argv (guestfs_h *g,
                                          const char *src,
                                          const char *dest,
                                          const struct guestfs_copy_file_to_device_argv *optargs);

       This is the "argv variant" of "guestfs_copy_file_to_device".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_copy_file_to_file
        int
        guestfs_copy_file_to_file (guestfs_h *g,
                                   const char *src,
                                   const char *dest,
                                   ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_COPY_FILE_TO_FILE_SRCOFFSET, int64_t srcoffset,
        GUESTFS_COPY_FILE_TO_FILE_DESTOFFSET, int64_t destoffset,
        GUESTFS_COPY_FILE_TO_FILE_SIZE, int64_t size,
        GUESTFS_COPY_FILE_TO_FILE_SPARSE, int sparse,
        GUESTFS_COPY_FILE_TO_FILE_APPEND, int append,

       See "guestfs_copy_device_to_device" for a general overview of this call.

       This is not the function you want for copying files.  This is for copying blocks within
       existing files.  See "guestfs_cp", "guestfs_cp_a" and "guestfs_mv" for general file
       copying and moving functions.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.13.25)

   guestfs_copy_file_to_file_va
        int
        guestfs_copy_file_to_file_va (guestfs_h *g,
                                      const char *src,
                                      const char *dest,
                                      va_list args);

       This is the "va_list variant" of "guestfs_copy_file_to_file".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_copy_file_to_file_argv
        int
        guestfs_copy_file_to_file_argv (guestfs_h *g,
                                        const char *src,
                                        const char *dest,
                                        const struct guestfs_copy_file_to_file_argv *optargs);

       This is the "argv variant" of "guestfs_copy_file_to_file".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_copy_in
        int
        guestfs_copy_in (guestfs_h *g,
                         const char *localpath,
                         const char *remotedir);

       "guestfs_copy_in" copies local files or directories recursively into the disk image,
       placing them in the directory called "remotedir" (which must exist).

       Wildcards cannot be used.

       This function returns 0 on success or -1 on error.

       (Added in 1.29.24)

   guestfs_copy_out
        int
        guestfs_copy_out (guestfs_h *g,
                          const char *remotepath,
                          const char *localdir);

       "guestfs_copy_out" copies remote files or directories recursively out of the disk image,
       placing them on the host disk in a local directory called "localdir" (which must exist).

       To download to the current directory, use "." as in:

        C<guestfs_copy_out> /home .

       Wildcards cannot be used.

       This function returns 0 on success or -1 on error.

       (Added in 1.29.24)

   guestfs_copy_size
        int
        guestfs_copy_size (guestfs_h *g,
                           const char *src,
                           const char *dest,
                           int64_t size);

       This function is deprecated.  In new code, use the "guestfs_copy_device_to_device" call
       instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This command copies exactly "size" bytes from one source device or file "src" to another
       destination device or file "dest".

       Note this will fail if the source is too short or if the destination is not large enough.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.0.87)

   guestfs_cp
        int
        guestfs_cp (guestfs_h *g,
                    const char *src,
                    const char *dest);

       This copies a file from "src" to "dest" where "dest" is either a destination filename or
       destination directory.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.18)

   guestfs_cp_a
        int
        guestfs_cp_a (guestfs_h *g,
                      const char *src,
                      const char *dest);

       This copies a file or directory from "src" to "dest" recursively using the "cp -a"
       command.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.18)

   guestfs_cp_r
        int
        guestfs_cp_r (guestfs_h *g,
                      const char *src,
                      const char *dest);

       This copies a file or directory from "src" to "dest" recursively using the "cp -rP"
       command.

       Most users should use "guestfs_cp_a" instead.  This command is useful when you don't want
       to preserve permissions, because the target filesystem does not support it (primarily when
       writing to DOS FAT filesystems).

       This function returns 0 on success or -1 on error.

       (Added in 1.21.38)

   guestfs_cpio_out
        int
        guestfs_cpio_out (guestfs_h *g,
                          const char *directory,
                          const char *cpiofile,
                          ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_CPIO_OUT_FORMAT, const char *format,

       This command packs the contents of directory and downloads it to local file "cpiofile".

       The optional "format" parameter can be used to select the format.  Only the following
       formats are currently permitted:

       "newc"
           New (SVR4) portable format.  This format happens to be compatible with the cpio-like
           format used by the Linux kernel for initramfs.

           This is the default format.

       "crc"
           New (SVR4) portable format with a checksum.

       This function returns 0 on success or -1 on error.

       (Added in 1.27.9)

   guestfs_cpio_out_va
        int
        guestfs_cpio_out_va (guestfs_h *g,
                             const char *directory,
                             const char *cpiofile,
                             va_list args);

       This is the "va_list variant" of "guestfs_cpio_out".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_cpio_out_argv
        int
        guestfs_cpio_out_argv (guestfs_h *g,
                               const char *directory,
                               const char *cpiofile,
                               const struct guestfs_cpio_out_argv *optargs);

       This is the "argv variant" of "guestfs_cpio_out".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_cryptsetup_close
        int
        guestfs_cryptsetup_close (guestfs_h *g,
                                  const char *device);

       This closes an encrypted device that was created earlier by "guestfs_cryptsetup_open".
       The "device" parameter must be the name of the mapping device (ie. /dev/mapper/mapname)
       and not the name of the underlying block device.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "luks".  See also "guestfs_feature_available".

       (Added in 1.43.2)

   guestfs_cryptsetup_open
        int
        guestfs_cryptsetup_open (guestfs_h *g,
                                 const char *device,
                                 const char *key,
                                 const char *mapname,
                                 ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_CRYPTSETUP_OPEN_READONLY, int readonly,
        GUESTFS_CRYPTSETUP_OPEN_CRYPTTYPE, const char *crypttype,

       This command opens a block device which has been encrypted according to the Linux Unified
       Key Setup (LUKS) standard, Windows BitLocker, or some other types.

       "device" is the encrypted block device or partition.

       The caller must supply one of the keys associated with the encrypted block device, in the
       "key" parameter.

       This creates a new block device called /dev/mapper/mapname.  Reads and writes to this
       block device are decrypted from and encrypted to the underlying "device" respectively.

       "mapname" cannot be "control" because that name is reserved by device-mapper.

       If the optional "crypttype" parameter is not present then libguestfs tries to guess the
       correct type (for example LUKS or BitLocker).  However you can override this by specifying
       one of the following types:

       "luks"
           A Linux LUKS device.

       "bitlk"
           A Windows BitLocker device.

       The optional "readonly" flag, if set to true, creates a read-only mapping.

       If this block device contains LVM volume groups, then calling "guestfs_lvm_scan" with the
       "activate" parameter "true" will make them visible.

       Use "guestfs_list_dm_devices" to list all device mapper devices.

       This function returns 0 on success or -1 on error.

       This function takes a key or passphrase parameter which could contain sensitive material.
       Read the section "KEYS AND PASSPHRASES" for more information.

       This function depends on the feature "luks".  See also "guestfs_feature_available".

       (Added in 1.43.2)

   guestfs_cryptsetup_open_va
        int
        guestfs_cryptsetup_open_va (guestfs_h *g,
                                    const char *device,
                                    const char *key,
                                    const char *mapname,
                                    va_list args);

       This is the "va_list variant" of "guestfs_cryptsetup_open".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_cryptsetup_open_argv
        int
        guestfs_cryptsetup_open_argv (guestfs_h *g,
                                      const char *device,
                                      const char *key,
                                      const char *mapname,
                                      const struct guestfs_cryptsetup_open_argv *optargs);

       This is the "argv variant" of "guestfs_cryptsetup_open".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_dd
        int
        guestfs_dd (guestfs_h *g,
                    const char *src,
                    const char *dest);

       This function is deprecated.  In new code, use the "guestfs_copy_device_to_device" call
       instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This command copies from one source device or file "src" to another destination device or
       file "dest".  Normally you would use this to copy to or from a device or partition, for
       example to duplicate a filesystem.

       If the destination is a device, it must be as large or larger than the source file or
       device, otherwise the copy will fail.  This command cannot do partial copies (see
       "guestfs_copy_device_to_device").

       This function returns 0 on success or -1 on error.

       (Added in 1.0.80)

   guestfs_device_index
        int
        guestfs_device_index (guestfs_h *g,
                              const char *device);

       This function takes a device name (eg. "/dev/sdb") and returns the index of the device in
       the list of devices.

       Index numbers start from 0.  The named device must exist, for example as a string returned
       from "guestfs_list_devices".

       See also "guestfs_list_devices", "guestfs_part_to_dev".

       On error this function returns -1.

       (Added in 1.19.7)

   guestfs_df
        char *
        guestfs_df (guestfs_h *g);

       This command runs the df(1) command to report disk space used.

       This command is mostly useful for interactive sessions.  It is not intended that you try
       to parse the output string.  Use "guestfs_statvfs" from programs.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.54)

   guestfs_df_h
        char *
        guestfs_df_h (guestfs_h *g);

       This command runs the "df -h" command to report disk space used in human-readable format.

       This command is mostly useful for interactive sessions.  It is not intended that you try
       to parse the output string.  Use "guestfs_statvfs" from programs.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.54)

   guestfs_disk_create
        int
        guestfs_disk_create (guestfs_h *g,
                             const char *filename,
                             const char *format,
                             int64_t size,
                             ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_DISK_CREATE_BACKINGFILE, const char *backingfile,
        GUESTFS_DISK_CREATE_BACKINGFORMAT, const char *backingformat,
        GUESTFS_DISK_CREATE_PREALLOCATION, const char *preallocation,
        GUESTFS_DISK_CREATE_COMPAT, const char *compat,
        GUESTFS_DISK_CREATE_CLUSTERSIZE, int clustersize,

       Create a blank disk image called filename (a host file) with format "format" (usually
       "raw" or "qcow2").  The size is "size" bytes.

       If used with the optional "backingfile" parameter, then a snapshot is created on top of
       the backing file.  In this case, "size" must be passed as "-1".  The size of the snapshot
       is the same as the size of the backing file, which is discovered automatically.  You are
       encouraged to also pass "backingformat" to describe the format of "backingfile".

       If filename refers to a block device, then the device is formatted.  The "size" is ignored
       since block devices have an intrinsic size.

       The other optional parameters are:

       "preallocation"
           If format is "raw", then this can be either "off" (or "sparse") or "full" to create a
           sparse or fully allocated file respectively.  The default is "off".

           If format is "qcow2", then this can be "off" (or "sparse"), "metadata" or "full".
           Preallocating metadata can be faster when doing lots of writes, but uses more space.
           The default is "off".

       "compat"
           "qcow2" only: Pass the string 1.1 to use the advanced qcow2 format supported by qemu ≥
           1.1.

       "clustersize"
           "qcow2" only: Change the qcow2 cluster size.  The default is 65536 (bytes) and this
           setting may be any power of two between 512 and 2097152.

       Note that this call does not add the new disk to the handle.  You may need to call
       "guestfs_add_drive_opts" separately.

       This function returns 0 on success or -1 on error.

       (Added in 1.25.31)

   guestfs_disk_create_va
        int
        guestfs_disk_create_va (guestfs_h *g,
                                const char *filename,
                                const char *format,
                                int64_t size,
                                va_list args);

       This is the "va_list variant" of "guestfs_disk_create".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_disk_create_argv
        int
        guestfs_disk_create_argv (guestfs_h *g,
                                  const char *filename,
                                  const char *format,
                                  int64_t size,
                                  const struct guestfs_disk_create_argv *optargs);

       This is the "argv variant" of "guestfs_disk_create".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_disk_format
        char *
        guestfs_disk_format (guestfs_h *g,
                             const char *filename);

       Detect and return the format of the disk image called filename.  filename can also be a
       host device, etc.  If the format of the image could not be detected, then "unknown" is
       returned.

       Note that detecting the disk format can be insecure under some circumstances.  See
       "CVE-2010-3851".

       See also: "DISK IMAGE FORMATS"

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.19.38)

   guestfs_disk_has_backing_file
        int
        guestfs_disk_has_backing_file (guestfs_h *g,
                                       const char *filename);

       Detect and return whether the disk image filename has a backing file.

       Note that detecting disk features can be insecure under some circumstances.  See
       "CVE-2010-3851".

       This function returns a C truth value on success or -1 on error.

       (Added in 1.19.39)

   guestfs_disk_virtual_size
        int64_t
        guestfs_disk_virtual_size (guestfs_h *g,
                                   const char *filename);

       Detect and return the virtual size in bytes of the disk image called filename.

       Note that detecting disk features can be insecure under some circumstances.  See
       "CVE-2010-3851".

       On error this function returns -1.

       (Added in 1.19.39)

   guestfs_dmesg
        char *
        guestfs_dmesg (guestfs_h *g);

       This returns the kernel messages (dmesg(1) output) from the guest kernel.  This is
       sometimes useful for extended debugging of problems.

       Another way to get the same information is to enable verbose messages with
       "guestfs_set_verbose" or by setting the environment variable "LIBGUESTFS_DEBUG=1" before
       running the program.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.18)

   guestfs_download
        int
        guestfs_download (guestfs_h *g,
                          const char *remotefilename,
                          const char *filename);

       Download file remotefilename and save it as filename on the local machine.

       filename can also be a named pipe.

       See also "guestfs_upload", "guestfs_cat".

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.0.2)

   guestfs_download_blocks
        int
        guestfs_download_blocks (guestfs_h *g,
                                 const char *device,
                                 int64_t start,
                                 int64_t stop,
                                 const char *filename,
                                 ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_DOWNLOAD_BLOCKS_UNALLOCATED, int unallocated,

       Download the data units from start address to stop from the disk partition (eg. /dev/sda1)
       and save them as filename on the local machine.

       The use of this API on sparse disk image formats such as QCOW, may result in large zero-
       filled files downloaded on the host.

       The size of a data unit varies across filesystem implementations.  On NTFS filesystems
       data units are referred as clusters while on ExtX ones they are referred as fragments.

       If the optional "unallocated" flag is true (default is false), only the unallocated blocks
       will be extracted.  This is useful to detect hidden data or to retrieve deleted files
       which data units have not been overwritten yet.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       This function depends on the feature "sleuthkit".  See also "guestfs_feature_available".

       (Added in 1.33.45)

   guestfs_download_blocks_va
        int
        guestfs_download_blocks_va (guestfs_h *g,
                                    const char *device,
                                    int64_t start,
                                    int64_t stop,
                                    const char *filename,
                                    va_list args);

       This is the "va_list variant" of "guestfs_download_blocks".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_download_blocks_argv
        int
        guestfs_download_blocks_argv (guestfs_h *g,
                                      const char *device,
                                      int64_t start,
                                      int64_t stop,
                                      const char *filename,
                                      const struct guestfs_download_blocks_argv *optargs);

       This is the "argv variant" of "guestfs_download_blocks".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_download_inode
        int
        guestfs_download_inode (guestfs_h *g,
                                const char *device,
                                int64_t inode,
                                const char *filename);

       Download a file given its inode from the disk partition (eg. /dev/sda1) and save it as
       filename on the local machine.

       It is not required to mount the disk to run this command.

       The command is capable of downloading deleted or inaccessible files.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       This function depends on the feature "sleuthkit".  See also "guestfs_feature_available".

       (Added in 1.33.14)

   guestfs_download_offset
        int
        guestfs_download_offset (guestfs_h *g,
                                 const char *remotefilename,
                                 const char *filename,
                                 int64_t offset,
                                 int64_t size);

       Download file remotefilename and save it as filename on the local machine.

       remotefilename is read for "size" bytes starting at "offset" (this region must be within
       the file or device).

       Note that there is no limit on the amount of data that can be downloaded with this call,
       unlike with "guestfs_pread", and this call always reads the full amount unless an error
       occurs.

       See also "guestfs_download", "guestfs_pread".

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.5.17)

   guestfs_drop_caches
        int
        guestfs_drop_caches (guestfs_h *g,
                             int whattodrop);

       This instructs the guest kernel to drop its page cache, and/or dentries and inode caches.
       The parameter "whattodrop" tells the kernel what precisely to drop, see
       https://linux-mm.org/Drop_Caches

       Setting "whattodrop" to 3 should drop everything.

       This automatically calls sync(2) before the operation, so that the maximum guest memory is
       freed.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.18)

   guestfs_du
        int64_t
        guestfs_du (guestfs_h *g,
                    const char *path);

       This command runs the "du -s" command to estimate file space usage for "path".

       "path" can be a file or a directory.  If "path" is a directory then the estimate includes
       the contents of the directory and all subdirectories (recursively).

       The result is the estimated size in kilobytes (ie. units of 1024 bytes).

       On error this function returns -1.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.0.54)

   guestfs_e2fsck
        int
        guestfs_e2fsck (guestfs_h *g,
                        const char *device,
                        ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_E2FSCK_CORRECT, int correct,
        GUESTFS_E2FSCK_FORCEALL, int forceall,

       This runs the ext2/ext3 filesystem checker on "device".  It can take the following
       optional arguments:

       "correct"
           Automatically repair the file system. This option will cause e2fsck to automatically
           fix any filesystem problems that can be safely fixed without human intervention.

           This option may not be specified at the same time as the "forceall" option.

       "forceall"
           Assume an answer of ‘yes’ to all questions; allows e2fsck to be used non-
           interactively.

           This option may not be specified at the same time as the "correct" option.

       This function returns 0 on success or -1 on error.

       (Added in 1.15.17)

   guestfs_e2fsck_va
        int
        guestfs_e2fsck_va (guestfs_h *g,
                           const char *device,
                           va_list args);

       This is the "va_list variant" of "guestfs_e2fsck".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_e2fsck_argv
        int
        guestfs_e2fsck_argv (guestfs_h *g,
                             const char *device,
                             const struct guestfs_e2fsck_argv *optargs);

       This is the "argv variant" of "guestfs_e2fsck".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_e2fsck_f
        int
        guestfs_e2fsck_f (guestfs_h *g,
                          const char *device);

       This function is deprecated.  In new code, use the "guestfs_e2fsck" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This runs "e2fsck -p -f device", ie. runs the ext2/ext3 filesystem checker on "device",
       noninteractively (-p), even if the filesystem appears to be clean (-f).

       This function returns 0 on success or -1 on error.

       (Added in 1.0.29)

   guestfs_echo_daemon
        char *
        guestfs_echo_daemon (guestfs_h *g,
                             char *const *words);

       This command concatenates the list of "words" passed with single spaces between them and
       returns the resulting string.

       You can use this command to test the connection through to the daemon.

       See also "guestfs_ping_daemon".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.69)

   guestfs_egrep
        char **
        guestfs_egrep (guestfs_h *g,
                       const char *regex,
                       const char *path);

       This function is deprecated.  In new code, use the "guestfs_grep" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls the external egrep(1) program and returns the matching lines.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

   guestfs_egrepi
        char **
        guestfs_egrepi (guestfs_h *g,
                        const char *regex,
                        const char *path);

       This function is deprecated.  In new code, use the "guestfs_grep" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls the external "egrep -i" program and returns the matching lines.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

   guestfs_equal
        int
        guestfs_equal (guestfs_h *g,
                       const char *file1,
                       const char *file2);

       This compares the two files file1 and file2 and returns true if their content is exactly
       equal, or false otherwise.

       The external cmp(1) program is used for the comparison.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.0.18)

   guestfs_exists
        int
        guestfs_exists (guestfs_h *g,
                        const char *path);

       This returns "true" if and only if there is a file, directory (or anything) with the given
       "path" name.

       See also "guestfs_is_file", "guestfs_is_dir", "guestfs_stat".

       This function returns a C truth value on success or -1 on error.

       (Added in 0.8)

   guestfs_extlinux
        int
        guestfs_extlinux (guestfs_h *g,
                          const char *directory);

       Install the SYSLINUX bootloader on the device mounted at directory.  Unlike
       "guestfs_syslinux" which requires a FAT filesystem, this can be used on an ext2/3/4 or
       btrfs filesystem.

       The directory parameter can be either a mountpoint, or a directory within the mountpoint.

       You also have to mark the partition as "active" ("guestfs_part_set_bootable") and a Master
       Boot Record must be installed (eg. using "guestfs_pwrite_device") on the first sector of
       the whole disk.  The SYSLINUX package comes with some suitable Master Boot Records.  See
       the extlinux(1) man page for further information.

       Additional configuration can be supplied to SYSLINUX by placing a file called
       extlinux.conf on the filesystem under directory.  For further information about the
       contents of this file, see extlinux(1).

       See also "guestfs_syslinux".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "extlinux".  See also "guestfs_feature_available".

       (Added in 1.21.27)

   guestfs_f2fs_expand
        int
        guestfs_f2fs_expand (guestfs_h *g,
                             const char *device);

       This expands a f2fs filesystem to match the size of the underlying device.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "f2fs".  See also "guestfs_feature_available".

       (Added in 1.39.3)

   guestfs_fallocate
        int
        guestfs_fallocate (guestfs_h *g,
                           const char *path,
                           int len);

       This function is deprecated.  In new code, use the "guestfs_fallocate64" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This command preallocates a file (containing zero bytes) named "path" of size "len" bytes.
       If the file exists already, it is overwritten.

       Do not confuse this with the guestfish-specific "alloc" command which allocates a file in
       the host and attaches it as a device.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_fallocate64
        int
        guestfs_fallocate64 (guestfs_h *g,
                             const char *path,
                             int64_t len);

       This command preallocates a file (containing zero bytes) named "path" of size "len" bytes.
       If the file exists already, it is overwritten.

       Note that this call allocates disk blocks for the file.  To create a sparse file use
       "guestfs_truncate_size" instead.

       The deprecated call "guestfs_fallocate" does the same, but owing to an oversight it only
       allowed 30 bit lengths to be specified, effectively limiting the maximum size of files
       created through that call to 1GB.

       Do not confuse this with the guestfish-specific "alloc" and "sparse" commands which create
       a file in the host and attach it as a device.

       This function returns 0 on success or -1 on error.

       (Added in 1.3.17)

   guestfs_feature_available
        int
        guestfs_feature_available (guestfs_h *g,
                                   char *const *groups);

       This is the same as "guestfs_available", but unlike that call it returns a simple
       true/false boolean result, instead of throwing an exception if a feature is not found.
       For other documentation see "guestfs_available".

       This function returns a C truth value on success or -1 on error.

       (Added in 1.21.26)

   guestfs_fgrep
        char **
        guestfs_fgrep (guestfs_h *g,
                       const char *pattern,
                       const char *path);

       This function is deprecated.  In new code, use the "guestfs_grep" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls the external fgrep(1) program and returns the matching lines.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

   guestfs_fgrepi
        char **
        guestfs_fgrepi (guestfs_h *g,
                        const char *pattern,
                        const char *path);

       This function is deprecated.  In new code, use the "guestfs_grep" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls the external "fgrep -i" program and returns the matching lines.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

   guestfs_file
        char *
        guestfs_file (guestfs_h *g,
                      const char *path);

       This call uses the standard file(1) command to determine the type or contents of the file.

       This call will also transparently look inside various types of compressed file.

       The filename is not prepended to the output (like the file command -b option).

       The output depends on the output of the underlying file(1) command and it can change in
       future in ways beyond our control.  In other words, the output is not guaranteed by the
       ABI.

       See also: file(1), "guestfs_vfs_type", "guestfs_lstat", "guestfs_is_file",
       "guestfs_is_blockdev" (etc), "guestfs_is_zero".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.9.1)

   guestfs_file_architecture
        char *
        guestfs_file_architecture (guestfs_h *g,
                                   const char *filename);

       This detects the architecture of the binary filename, and returns it if known.

       Currently defined architectures are:

       "aarch64"
           64 bit ARM.

       "arm"
           32 bit ARM.

       "i386"
           This string is returned for all 32 bit i386, i486, i586, i686 binaries irrespective of
           the precise processor requirements of the binary.

       "ia64"
           Intel Itanium.

       "ppc"
           32 bit Power PC.

       "ppc64"
           64 bit Power PC (big endian).

       "ppc64le"
           64 bit Power PC (little endian).

       "riscv32"
       "riscv64"
       "riscv128"
           RISC-V 32-, 64- or 128-bit variants.

       "s390"
           31 bit IBM S/390.

       "s390x"
           64 bit IBM S/390.

       "sparc"
           32 bit SPARC.

       "sparc64"
           64 bit SPARC V9 and above.

       "x86_64"
           64 bit x86-64.

       Libguestfs may return other architecture strings in future.

       The function works on at least the following types of files:

       •   many types of Un*x and Linux binary

       •   many types of Un*x and Linux shared library

       •   Windows Win32 and Win64 binaries

       •   Windows Win32 and Win64 DLLs

           Win32 binaries and DLLs return "i386".

           Win64 binaries and DLLs return "x86_64".

       •   Linux kernel modules

       •   Linux new-style initrd images

       •   some non-x86 Linux vmlinuz kernels

       What it can't do currently:

       •   static libraries (libfoo.a)

       •   Linux old-style initrd as compressed ext2 filesystem (RHEL 3)

       •   x86 Linux vmlinuz kernels

           x86 vmlinuz images (bzImage format) consist of a mix of 16-, 32- and compressed code,
           and are horribly hard to unpack.  If you want to find the architecture of a kernel,
           use the architecture of the associated initrd or kernel module(s) instead.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.5.3)

   guestfs_filesize
        int64_t
        guestfs_filesize (guestfs_h *g,
                          const char *file);

       This command returns the size of file in bytes.

       To get other stats about a file, use "guestfs_stat", "guestfs_lstat", "guestfs_is_dir",
       "guestfs_is_file" etc.  To get the size of block devices, use
       "guestfs_blockdev_getsize64".

       On error this function returns -1.

       (Added in 1.0.82)

   guestfs_filesystem_available
        int
        guestfs_filesystem_available (guestfs_h *g,
                                      const char *filesystem);

       Check whether libguestfs supports the named filesystem.  The argument "filesystem" is a
       filesystem name, such as "ext3".

       You must call "guestfs_launch" before using this command.

       This is mainly useful as a negative test.  If this returns true, it doesn't mean that a
       particular filesystem can be created or mounted, since filesystems can fail for other
       reasons such as it being a later version of the filesystem, or having incompatible
       features, or lacking the right mkfs.<fs> tool.

       See also "guestfs_available", "guestfs_feature_available", "AVAILABILITY".

       This function returns a C truth value on success or -1 on error.

       (Added in 1.19.5)

   guestfs_filesystem_walk
        struct guestfs_tsk_dirent_list *
        guestfs_filesystem_walk (guestfs_h *g,
                                 const char *device);

       Walk through the internal structures of a disk partition (eg. /dev/sda1) in order to
       return a list of all the files and directories stored within.

       It is not necessary to mount the disk partition to run this command.

       All entries in the filesystem are returned. This function can list deleted or unaccessible
       files. The entries are not sorted.

       The "tsk_dirent" structure contains the following fields.

       "tsk_inode"
           Filesystem reference number of the node. It might be 0 if the node has been deleted.

       "tsk_type"
           Basic file type information.  See below for a detailed list of values.

       "tsk_size"
           File size in bytes. It might be "-1" if the node has been deleted.

       "tsk_name"
           The file path relative to its directory.

       "tsk_flags"
           Bitfield containing extra information regarding the entry.  It contains the logical OR
           of the following values:

           0x0001
               If set to 1, the file is allocated and visible within the filesystem.  Otherwise,
               the file has been deleted.  Under certain circumstances, the function
               "download_inode" can be used to recover deleted files.

           0x0002
               Filesystem such as NTFS and Ext2 or greater, separate the file name from the
               metadata structure.  The bit is set to 1 when the file name is in an unallocated
               state and the metadata structure is in an allocated one.  This generally implies
               the metadata has been reallocated to a new file.  Therefore, information such as
               file type, file size, timestamps, number of links and symlink target might not
               correspond with the ones of the original deleted entry.

           0x0004
               The bit is set to 1 when the file is compressed using filesystem native
               compression support (NTFS). The API is not able to detect application level
               compression.

       "tsk_atime_sec"
       "tsk_atime_nsec"
       "tsk_mtime_sec"
       "tsk_mtime_nsec"
       "tsk_ctime_sec"
       "tsk_ctime_nsec"
       "tsk_crtime_sec"
       "tsk_crtime_nsec"
           Respectively, access, modification, last status change and creation time in Unix
           format in seconds and nanoseconds.

       "tsk_nlink"
           Number of file names pointing to this entry.

       "tsk_link"
           If the entry is a symbolic link, this field will contain the path to the target file.

       The "tsk_type" field will contain one of the following characters:

       'b' Block special

       'c' Char special

       'd' Directory

       'f' FIFO (named pipe)

       'l' Symbolic link

       'r' Regular file

       's' Socket

       'h' Shadow inode (Solaris)

       'w' Whiteout inode (BSD)

       'u' Unknown file type

       This function returns a "struct guestfs_tsk_dirent_list *", or NULL if there was an error.
       The caller must call "guestfs_free_tsk_dirent_list" after use.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       This function depends on the feature "libtsk".  See also "guestfs_feature_available".

       (Added in 1.33.39)

   guestfs_fill
        int
        guestfs_fill (guestfs_h *g,
                      int c,
                      int len,
                      const char *path);

       This command creates a new file called "path".  The initial content of the file is "len"
       octets of "c", where "c" must be a number in the range "[0..255]".

       To fill a file with zero bytes (sparsely), it is much more efficient to use
       "guestfs_truncate_size".  To create a file with a pattern of repeating bytes use
       "guestfs_fill_pattern".

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.0.79)

   guestfs_fill_dir
        int
        guestfs_fill_dir (guestfs_h *g,
                          const char *dir,
                          int nr);

       This function, useful for testing filesystems, creates "nr" empty files in the directory
       "dir" with names 00000000 through "nr-1" (ie. each file name is 8 digits long padded with
       zeroes).

       This function returns 0 on success or -1 on error.

       (Added in 1.19.32)

   guestfs_fill_pattern
        int
        guestfs_fill_pattern (guestfs_h *g,
                              const char *pattern,
                              int len,
                              const char *path);

       This function is like "guestfs_fill" except that it creates a new file of length "len"
       containing the repeating pattern of bytes in "pattern".  The pattern is truncated if
       necessary to ensure the length of the file is exactly "len" bytes.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.3.12)

   guestfs_find
        char **
        guestfs_find (guestfs_h *g,
                      const char *directory);

       This command lists out all files and directories, recursively, starting at directory.  It
       is essentially equivalent to running the shell command "find directory -print" but some
       post-processing happens on the output, described below.

       This returns a list of strings without any prefix.  Thus if the directory structure was:

        /tmp/a
        /tmp/b
        /tmp/c/d

       then the returned list from "guestfs_find" /tmp would be 4 elements:

        a
        b
        c
        c/d

       If directory is not a directory, then this command returns an error.

       The returned list is sorted.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.0.27)

   guestfs_find0
        int
        guestfs_find0 (guestfs_h *g,
                       const char *directory,
                       const char *files);

       This command lists out all files and directories, recursively, starting at directory,
       placing the resulting list in the external file called files.

       This command works the same way as "guestfs_find" with the following exceptions:

       •   The resulting list is written to an external file.

       •   Items (filenames) in the result are separated by "\0" characters.  See find(1) option
           -print0.

       •   The result list is not sorted.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.74)

   guestfs_find_inode
        struct guestfs_tsk_dirent_list *
        guestfs_find_inode (guestfs_h *g,
                            const char *device,
                            int64_t inode);

       Searches all the entries associated with the given inode.

       For each entry, a "tsk_dirent" structure is returned.  See "filesystem_walk" for more
       information about "tsk_dirent" structures.

       This function returns a "struct guestfs_tsk_dirent_list *", or NULL if there was an error.
       The caller must call "guestfs_free_tsk_dirent_list" after use.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       This function depends on the feature "libtsk".  See also "guestfs_feature_available".

       (Added in 1.35.6)

   guestfs_findfs_label
        char *
        guestfs_findfs_label (guestfs_h *g,
                              const char *label);

       This command searches the filesystems and returns the one which has the given label.  An
       error is returned if no such filesystem can be found.

       To find the label of a filesystem, use "guestfs_vfs_label".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.5.3)

   guestfs_findfs_uuid
        char *
        guestfs_findfs_uuid (guestfs_h *g,
                             const char *uuid);

       This command searches the filesystems and returns the one which has the given UUID.  An
       error is returned if no such filesystem can be found.

       To find the UUID of a filesystem, use "guestfs_vfs_uuid".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.5.3)

   guestfs_fsck
        int
        guestfs_fsck (guestfs_h *g,
                      const char *fstype,
                      const char *device);

       This runs the filesystem checker (fsck) on "device" which should have filesystem type
       "fstype".

       The returned integer is the status.  See fsck(8) for the list of status codes from "fsck".

       Notes:

       •   Multiple status codes can be summed together.

       •   A non-zero return code can mean "success", for example if errors have been corrected
           on the filesystem.

       •   Checking or repairing NTFS volumes is not supported (by linux-ntfs).

       This command is entirely equivalent to running "fsck -a -t fstype device".

       On error this function returns -1.

       (Added in 1.0.16)

   guestfs_fstrim
        int
        guestfs_fstrim (guestfs_h *g,
                        const char *mountpoint,
                        ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_FSTRIM_OFFSET, int64_t offset,
        GUESTFS_FSTRIM_LENGTH, int64_t length,
        GUESTFS_FSTRIM_MINIMUMFREEEXTENT, int64_t minimumfreeextent,

       Trim the free space in the filesystem mounted on "mountpoint".  The filesystem must be
       mounted read-write.

       The filesystem contents are not affected, but any free space in the filesystem is
       "trimmed", that is, given back to the host device, thus making disk images more sparse,
       allowing unused space in qcow2 files to be reused, etc.

       This operation requires support in libguestfs, the mounted filesystem, the host
       filesystem, qemu and the host kernel.  If this support isn't present it may give an error
       or even appear to run but do nothing.

       In the case where the kernel vfs driver does not support trimming, this call will fail
       with errno set to "ENOTSUP".  Currently this happens when trying to trim FAT filesystems.

       See also "guestfs_zero_free_space".  That is a slightly different operation that turns
       free space in the filesystem into zeroes.  It is valid to call "guestfs_fstrim" either
       instead of, or after calling "guestfs_zero_free_space".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "fstrim".  See also "guestfs_feature_available".

       (Added in 1.19.6)

   guestfs_fstrim_va
        int
        guestfs_fstrim_va (guestfs_h *g,
                           const char *mountpoint,
                           va_list args);

       This is the "va_list variant" of "guestfs_fstrim".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_fstrim_argv
        int
        guestfs_fstrim_argv (guestfs_h *g,
                             const char *mountpoint,
                             const struct guestfs_fstrim_argv *optargs);

       This is the "argv variant" of "guestfs_fstrim".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_get_append
        const char *
        guestfs_get_append (guestfs_h *g);

       Return the additional kernel options which are added to the libguestfs appliance kernel
       command line.

       If "NULL" then no options are added.

       This function returns a string which may be NULL.  There is no way to return an error from
       this function.  The string is owned by the guest handle and must not be freed.

       (Added in 1.0.26)

   guestfs_get_attach_method
        char *
        guestfs_get_attach_method (guestfs_h *g);

       This function is deprecated.  In new code, use the "guestfs_get_backend" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       Return the current backend.

       See "guestfs_set_backend" and "BACKEND".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.9.8)

   guestfs_get_autosync
        int
        guestfs_get_autosync (guestfs_h *g);

       Get the autosync flag.

       This function returns a C truth value on success or -1 on error.

       (Added in 0.3)

   guestfs_get_backend
        char *
        guestfs_get_backend (guestfs_h *g);

       Return the current backend.

       This handle property was previously called the "attach method".

       See "guestfs_set_backend" and "BACKEND".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.21.26)

   guestfs_get_backend_setting
        char *
        guestfs_get_backend_setting (guestfs_h *g,
                                     const char *name);

       Find a backend setting string which is either "name" or begins with "name=".  If "name",
       this returns the string "1".  If "name=", this returns the part after the equals sign
       (which may be an empty string).

       If no such setting is found, this function throws an error.  The errno (see
       "guestfs_last_errno") will be "ESRCH" in this case.

       See "BACKEND", "BACKEND SETTINGS".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.27.2)

   guestfs_get_backend_settings
        char **
        guestfs_get_backend_settings (guestfs_h *g);

       Return the current backend settings.

       This call returns all backend settings strings.  If you want to find a single backend
       setting, see "guestfs_get_backend_setting".

       See "BACKEND", "BACKEND SETTINGS".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.25.24)

   guestfs_get_cachedir
        char *
        guestfs_get_cachedir (guestfs_h *g);

       Get the directory used by the handle to store the appliance cache.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.19.58)

   guestfs_get_direct
        int
        guestfs_get_direct (guestfs_h *g);

       This function is deprecated.  In new code, use the "guestfs_internal_get_console_socket"
       call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       Return the direct appliance mode flag.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.0.72)

   guestfs_get_e2attrs
        char *
        guestfs_get_e2attrs (guestfs_h *g,
                             const char *file);

       This returns the file attributes associated with file.

       The attributes are a set of bits associated with each inode which affect the behaviour of
       the file.  The attributes are returned as a string of letters (described below).  The
       string may be empty, indicating that no file attributes are set for this file.

       These attributes are only present when the file is located on an ext2/3/4 filesystem.
       Using this call on other filesystem types will result in an error.

       The characters (file attributes) in the returned string are currently:

       'A' When the file is accessed, its atime is not modified.

       'a' The file is append-only.

       'c' The file is compressed on-disk.

       'D' (Directories only.)  Changes to this directory are written synchronously to disk.

       'd' The file is not a candidate for backup (see dump(8)).

       'E' The file has compression errors.

       'e' The file is using extents.

       'h' The file is storing its blocks in units of the filesystem blocksize instead of
           sectors.

       'I' (Directories only.)  The directory is using hashed trees.

       'i' The file is immutable.  It cannot be modified, deleted or renamed.  No link can be
           created to this file.

       'j' The file is data-journaled.

       's' When the file is deleted, all its blocks will be zeroed.

       'S' Changes to this file are written synchronously to disk.

       'T' (Directories only.)  This is a hint to the block allocator that subdirectories
           contained in this directory should be spread across blocks.  If not present, the block
           allocator will try to group subdirectories together.

       't' For a file, this disables tail-merging.  (Not used by upstream implementations of
           ext2.)

       'u' When the file is deleted, its blocks will be saved, allowing the file to be undeleted.

       'X' The raw contents of the compressed file may be accessed.

       'Z' The compressed file is dirty.

       More file attributes may be added to this list later.  Not all file attributes may be set
       for all kinds of files.  For detailed information, consult the chattr(1) man page.

       See also "guestfs_set_e2attrs".

       Don't confuse these attributes with extended attributes (see "guestfs_getxattr").

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.17.31)

   guestfs_get_e2generation
        int64_t
        guestfs_get_e2generation (guestfs_h *g,
                                  const char *file);

       This returns the ext2 file generation of a file.  The generation (which used to be called
       the "version") is a number associated with an inode.  This is most commonly used by NFS
       servers.

       The generation is only present when the file is located on an ext2/3/4 filesystem.  Using
       this call on other filesystem types will result in an error.

       See "guestfs_set_e2generation".

       On error this function returns -1.

       (Added in 1.17.31)

   guestfs_get_e2label
        char *
        guestfs_get_e2label (guestfs_h *g,
                             const char *device);

       This function is deprecated.  In new code, use the "guestfs_vfs_label" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This returns the ext2/3/4 filesystem label of the filesystem on "device".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.15)

   guestfs_get_e2uuid
        char *
        guestfs_get_e2uuid (guestfs_h *g,
                            const char *device);

       This function is deprecated.  In new code, use the "guestfs_vfs_uuid" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This returns the ext2/3/4 filesystem UUID of the filesystem on "device".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.15)

   guestfs_get_hv
        char *
        guestfs_get_hv (guestfs_h *g);

       Return the current hypervisor binary.

       This is always non-NULL.  If it wasn't set already, then this will return the default qemu
       binary name.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.23.17)

   guestfs_get_identifier
        const char *
        guestfs_get_identifier (guestfs_h *g);

       Get the handle identifier.  See "guestfs_set_identifier".

       This function returns a string, or NULL on error.  The string is owned by the guest handle
       and must not be freed.

       (Added in 1.31.14)

   guestfs_get_libvirt_requested_credential_challenge
        char *
        guestfs_get_libvirt_requested_credential_challenge (guestfs_h *g,
                                                            int index);

       Get the challenge (provided by libvirt) for the "index"'th requested credential.  If
       libvirt did not provide a challenge, this returns the empty string "".

       See "LIBVIRT AUTHENTICATION" for documentation and example code.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.19.52)

   guestfs_get_libvirt_requested_credential_defresult
        char *
        guestfs_get_libvirt_requested_credential_defresult (guestfs_h *g,
                                                            int index);

       Get the default result (provided by libvirt) for the "index"'th requested credential.  If
       libvirt did not provide a default result, this returns the empty string "".

       See "LIBVIRT AUTHENTICATION" for documentation and example code.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.19.52)

   guestfs_get_libvirt_requested_credential_prompt
        char *
        guestfs_get_libvirt_requested_credential_prompt (guestfs_h *g,
                                                         int index);

       Get the prompt (provided by libvirt) for the "index"'th requested credential.  If libvirt
       did not provide a prompt, this returns the empty string "".

       See "LIBVIRT AUTHENTICATION" for documentation and example code.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.19.52)

   guestfs_get_libvirt_requested_credentials
        char **
        guestfs_get_libvirt_requested_credentials (guestfs_h *g);

       This should only be called during the event callback for events of type
       "GUESTFS_EVENT_LIBVIRT_AUTH".

       Return the list of credentials requested by libvirt.  Possible values are a subset of the
       strings provided when you called "guestfs_set_libvirt_supported_credentials".

       See "LIBVIRT AUTHENTICATION" for documentation and example code.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.19.52)

   guestfs_get_memsize
        int
        guestfs_get_memsize (guestfs_h *g);

       This gets the memory size in megabytes allocated to the hypervisor.

       If "guestfs_set_memsize" was not called on this handle, and if "LIBGUESTFS_MEMSIZE" was
       not set, then this returns the compiled-in default value for memsize.

       For more information on the architecture of libguestfs, see guestfs(3).

       On error this function returns -1.

       (Added in 1.0.55)

   guestfs_get_network
        int
        guestfs_get_network (guestfs_h *g);

       This returns the enable network flag.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.5.4)

   guestfs_get_path
        const char *
        guestfs_get_path (guestfs_h *g);

       Return the current search path.

       This is always non-NULL.  If it wasn't set already, then this will return the default
       path.

       This function returns a string, or NULL on error.  The string is owned by the guest handle
       and must not be freed.

       (Added in 0.3)

   guestfs_get_pgroup
        int
        guestfs_get_pgroup (guestfs_h *g);

       This returns the process group flag.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.11.18)

   guestfs_get_pid
        int
        guestfs_get_pid (guestfs_h *g);

       Return the process ID of the hypervisor.  If there is no hypervisor running, then this
       will return an error.

       This is an internal call used for debugging and testing.

       On error this function returns -1.

       (Added in 1.0.56)

   guestfs_get_program
        const char *
        guestfs_get_program (guestfs_h *g);

       Get the program name.  See "guestfs_set_program".

       This function returns a string, or NULL on error.  The string is owned by the guest handle
       and must not be freed.

       (Added in 1.21.29)

   guestfs_get_qemu
        const char *
        guestfs_get_qemu (guestfs_h *g);

       This function is deprecated.  In new code, use the "guestfs_get_hv" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       Return the current hypervisor binary (usually qemu).

       This is always non-NULL.  If it wasn't set already, then this will return the default qemu
       binary name.

       This function returns a string, or NULL on error.  The string is owned by the guest handle
       and must not be freed.

       (Added in 1.0.6)

   guestfs_get_recovery_proc
        int
        guestfs_get_recovery_proc (guestfs_h *g);

       Return the recovery process enabled flag.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.0.77)

   guestfs_get_selinux
        int
        guestfs_get_selinux (guestfs_h *g);

       This function is deprecated.  In new code, use the "guestfs_selinux_relabel" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This returns the current setting of the selinux flag which is passed to the appliance at
       boot time.  See "guestfs_set_selinux".

       For more information on the architecture of libguestfs, see guestfs(3).

       This function returns a C truth value on success or -1 on error.

       (Added in 1.0.67)

   guestfs_get_smp
        int
        guestfs_get_smp (guestfs_h *g);

       This returns the number of virtual CPUs assigned to the appliance.

       On error this function returns -1.

       (Added in 1.13.15)

   guestfs_get_sockdir
        char *
        guestfs_get_sockdir (guestfs_h *g);

       Get the directory used by the handle to store temporary socket files.

       This is different from "guestfs_get_tmpdir", as we need shorter paths for sockets (due to
       the limited buffers of filenames for UNIX sockets), and "guestfs_get_tmpdir" may be too
       long for them.

       The environment variable "XDG_RUNTIME_DIR" controls the default value: If
       "XDG_RUNTIME_DIR" is set, then that is the default.  Else /tmp is the default.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.33.8)

   guestfs_get_state
        int
        guestfs_get_state (guestfs_h *g);

       This returns the current state as an opaque integer.  This is only useful for printing
       debug and internal error messages.

       For more information on states, see guestfs(3).

       On error this function returns -1.

       (Added in 1.0.2)

   guestfs_get_tmpdir
        char *
        guestfs_get_tmpdir (guestfs_h *g);

       Get the directory used by the handle to store temporary files.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.19.58)

   guestfs_get_trace
        int
        guestfs_get_trace (guestfs_h *g);

       Return the command trace flag.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.0.69)

   guestfs_get_umask
        int
        guestfs_get_umask (guestfs_h *g);

       Return the current umask.  By default the umask is 022 unless it has been set by calling
       "guestfs_umask".

       On error this function returns -1.

       (Added in 1.3.4)

   guestfs_get_verbose
        int
        guestfs_get_verbose (guestfs_h *g);

       This returns the verbose messages flag.

       This function returns a C truth value on success or -1 on error.

       (Added in 0.3)

   guestfs_getcon
        char *
        guestfs_getcon (guestfs_h *g);

       This function is deprecated.  In new code, use the "guestfs_selinux_relabel" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This gets the SELinux security context of the daemon.

       See the documentation about SELINUX in guestfs(3), and "guestfs_setcon"

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "selinux".  See also "guestfs_feature_available".

       (Added in 1.0.67)

   guestfs_getxattr
        char *
        guestfs_getxattr (guestfs_h *g,
                          const char *path,
                          const char *name,
                          size_t *size_r);

       Get a single extended attribute from file "path" named "name".  This call follows
       symlinks.  If you want to lookup an extended attribute for the symlink itself, use
       "guestfs_lgetxattr".

       Normally it is better to get all extended attributes from a file in one go by calling
       "guestfs_getxattrs".  However some Linux filesystem implementations are buggy and do not
       provide a way to list out attributes.  For these filesystems (notably ntfs-3g) you have to
       know the names of the extended attributes you want in advance and call this function.

       Extended attribute values are blobs of binary data.  If there is no extended attribute
       named "name", this returns an error.

       See also: "guestfs_getxattrs", "guestfs_lgetxattr", attr(5).

       This function returns a buffer, or NULL on error.  The size of the returned buffer is
       written to *size_r.  The caller must free the returned buffer after use.

       This function depends on the feature "linuxxattrs".  See also "guestfs_feature_available".

       (Added in 1.7.24)

   guestfs_getxattrs
        struct guestfs_xattr_list *
        guestfs_getxattrs (guestfs_h *g,
                           const char *path);

       This call lists the extended attributes of the file or directory "path".

       At the system call level, this is a combination of the listxattr(2) and getxattr(2) calls.

       See also: "guestfs_lgetxattrs", attr(5).

       This function returns a "struct guestfs_xattr_list *", or NULL if there was an error.  The
       caller must call "guestfs_free_xattr_list" after use.

       This function depends on the feature "linuxxattrs".  See also "guestfs_feature_available".

       (Added in 1.0.59)

   guestfs_glob_expand
        char **
        guestfs_glob_expand (guestfs_h *g,
                             const char *pattern);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_glob_expand_opts" with no optional arguments.

       (Added in 1.0.50)

   guestfs_glob_expand_opts
        char **
        guestfs_glob_expand_opts (guestfs_h *g,
                                  const char *pattern,
                                  ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_GLOB_EXPAND_OPTS_DIRECTORYSLASH, int directoryslash,

       This command searches for all the pathnames matching "pattern" according to the wildcard
       expansion rules used by the shell.

       If no paths match, then this returns an empty list (note: not an error).

       It is just a wrapper around the C glob(3) function with flags "GLOB_MARK|GLOB_BRACE".  See
       that manual page for more details.

       "directoryslash" controls whether use the "GLOB_MARK" flag for glob(3), and it defaults to
       true.  It can be explicitly set as off to return no trailing slashes in filenames of
       directories.

       Notice that there is no equivalent command for expanding a device name (eg. /dev/sd*).
       Use "guestfs_list_devices", "guestfs_list_partitions" etc functions instead.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.0.50)

   guestfs_glob_expand_opts_va
        char **
        guestfs_glob_expand_opts_va (guestfs_h *g,
                                     const char *pattern,
                                     va_list args);

       This is the "va_list variant" of "guestfs_glob_expand_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_glob_expand_opts_argv
        char **
        guestfs_glob_expand_opts_argv (guestfs_h *g,
                                       const char *pattern,
                                       const struct guestfs_glob_expand_opts_argv *optargs);

       This is the "argv variant" of "guestfs_glob_expand_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_grep
        char **
        guestfs_grep (guestfs_h *g,
                      const char *regex,
                      const char *path);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_grep_opts" with no optional arguments.

       (Added in 1.0.66)

   guestfs_grep_opts
        char **
        guestfs_grep_opts (guestfs_h *g,
                           const char *regex,
                           const char *path,
                           ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_GREP_OPTS_EXTENDED, int extended,
        GUESTFS_GREP_OPTS_FIXED, int fixed,
        GUESTFS_GREP_OPTS_INSENSITIVE, int insensitive,
        GUESTFS_GREP_OPTS_COMPRESSED, int compressed,

       This calls the external grep(1) program and returns the matching lines.

       The optional flags are:

       "extended"
           Use extended regular expressions.  This is the same as using the -E flag.

       "fixed"
           Match fixed (don't use regular expressions).  This is the same as using the -F flag.

       "insensitive"
           Match case-insensitive.  This is the same as using the -i flag.

       "compressed"
           Use zgrep(1) instead of grep(1).  This allows the input to be compress- or gzip-
           compressed.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

   guestfs_grep_opts_va
        char **
        guestfs_grep_opts_va (guestfs_h *g,
                              const char *regex,
                              const char *path,
                              va_list args);

       This is the "va_list variant" of "guestfs_grep_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_grep_opts_argv
        char **
        guestfs_grep_opts_argv (guestfs_h *g,
                                const char *regex,
                                const char *path,
                                const struct guestfs_grep_opts_argv *optargs);

       This is the "argv variant" of "guestfs_grep_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_grepi
        char **
        guestfs_grepi (guestfs_h *g,
                       const char *regex,
                       const char *path);

       This function is deprecated.  In new code, use the "guestfs_grep" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls the external "grep -i" program and returns the matching lines.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

   guestfs_grub_install
        int
        guestfs_grub_install (guestfs_h *g,
                              const char *root,
                              const char *device);

       This command installs GRUB 1 (the Grand Unified Bootloader) on "device", with the root
       directory being "root".

       Notes:

       •   There is currently no way in the API to install grub2, which is used by most modern
           Linux guests.  It is possible to run the grub2 command from the guest, although see
           the caveats in "RUNNING COMMANDS".

       •   This uses grub-install(8) from the host.  Unfortunately grub is not always compatible
           with itself, so this only works in rather narrow circumstances.  Careful testing with
           each guest version is advisable.

       •   If grub-install reports the error "No suitable drive was found in the generated device
           map."  it may be that you need to create a /boot/grub/device.map file first that
           contains the mapping between grub device names and Linux device names.  It is usually
           sufficient to create a file containing:

            (hd0) /dev/vda

           replacing /dev/vda with the name of the installation device.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "grub".  See also "guestfs_feature_available".

       (Added in 1.0.17)

   guestfs_head
        char **
        guestfs_head (guestfs_h *g,
                      const char *path);

       This command returns up to the first 10 lines of a file as a list of strings.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.54)

   guestfs_head_n
        char **
        guestfs_head_n (guestfs_h *g,
                        int nrlines,
                        const char *path);

       If the parameter "nrlines" is a positive number, this returns the first "nrlines" lines of
       the file "path".

       If the parameter "nrlines" is a negative number, this returns lines from the file "path",
       excluding the last "nrlines" lines.

       If the parameter "nrlines" is zero, this returns an empty list.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.54)

   guestfs_hexdump
        char *
        guestfs_hexdump (guestfs_h *g,
                         const char *path);

       This runs "hexdump -C" on the given "path".  The result is the human-readable, canonical
       hex dump of the file.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.22)

   guestfs_hivex_close
        int
        guestfs_hivex_close (guestfs_h *g);

       Close the current hivex handle.

       This is a wrapper around the hivex(3) call of the same name.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_commit
        int
        guestfs_hivex_commit (guestfs_h *g,
                              const char *filename);

       Commit (write) changes to the hive.

       If the optional filename parameter is null, then the changes are written back to the same
       hive that was opened.  If this is not null then they are written to the alternate filename
       given and the original hive is left untouched.

       This is a wrapper around the hivex(3) call of the same name.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_node_add_child
        int64_t
        guestfs_hivex_node_add_child (guestfs_h *g,
                                      int64_t parent,
                                      const char *name);

       Add a child node to "parent" named "name".

       This is a wrapper around the hivex(3) call of the same name.

       On error this function returns -1.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_node_children
        struct guestfs_hivex_node_list *
        guestfs_hivex_node_children (guestfs_h *g,
                                     int64_t nodeh);

       Return the list of nodes which are subkeys of "nodeh".

       This is a wrapper around the hivex(3) call of the same name.

       This function returns a "struct guestfs_hivex_node_list *", or NULL if there was an error.
       The caller must call "guestfs_free_hivex_node_list" after use.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_node_delete_child
        int
        guestfs_hivex_node_delete_child (guestfs_h *g,
                                         int64_t nodeh);

       Delete "nodeh", recursively if necessary.

       This is a wrapper around the hivex(3) call of the same name.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_node_get_child
        int64_t
        guestfs_hivex_node_get_child (guestfs_h *g,
                                      int64_t nodeh,
                                      const char *name);

       Return the child of "nodeh" with the name "name", if it exists.  This can return 0 meaning
       the name was not found.

       This is a wrapper around the hivex(3) call of the same name.

       On error this function returns -1.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_node_get_value
        int64_t
        guestfs_hivex_node_get_value (guestfs_h *g,
                                      int64_t nodeh,
                                      const char *key);

       Return the value attached to "nodeh" which has the name "key", if it exists.  This can
       return 0 meaning the key was not found.

       This is a wrapper around the hivex(3) call of the same name.

       On error this function returns -1.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_node_name
        char *
        guestfs_hivex_node_name (guestfs_h *g,
                                 int64_t nodeh);

       Return the name of "nodeh".

       This is a wrapper around the hivex(3) call of the same name.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_node_parent
        int64_t
        guestfs_hivex_node_parent (guestfs_h *g,
                                   int64_t nodeh);

       Return the parent node of "nodeh".

       This is a wrapper around the hivex(3) call of the same name.

       On error this function returns -1.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_node_set_value
        int
        guestfs_hivex_node_set_value (guestfs_h *g,
                                      int64_t nodeh,
                                      const char *key,
                                      int64_t t,
                                      const char *val,
                                      size_t val_size);

       Set or replace a single value under the node "nodeh".  The "key" is the name, "t" is the
       type, and "val" is the data.

       This is a wrapper around the hivex(3) call of the same name.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_node_values
        struct guestfs_hivex_value_list *
        guestfs_hivex_node_values (guestfs_h *g,
                                   int64_t nodeh);

       Return the array of (key, datatype, data) tuples attached to "nodeh".

       This is a wrapper around the hivex(3) call of the same name.

       This function returns a "struct guestfs_hivex_value_list *", or NULL if there was an
       error.  The caller must call "guestfs_free_hivex_value_list" after use.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_open
        int
        guestfs_hivex_open (guestfs_h *g,
                            const char *filename,
                            ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_HIVEX_OPEN_VERBOSE, int verbose,
        GUESTFS_HIVEX_OPEN_DEBUG, int debug,
        GUESTFS_HIVEX_OPEN_WRITE, int write,
        GUESTFS_HIVEX_OPEN_UNSAFE, int unsafe,

       Open the Windows Registry hive file named filename.  If there was any previous hivex
       handle associated with this guestfs session, then it is closed.

       This is a wrapper around the hivex(3) call of the same name.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_open_va
        int
        guestfs_hivex_open_va (guestfs_h *g,
                               const char *filename,
                               va_list args);

       This is the "va_list variant" of "guestfs_hivex_open".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_hivex_open_argv
        int
        guestfs_hivex_open_argv (guestfs_h *g,
                                 const char *filename,
                                 const struct guestfs_hivex_open_argv *optargs);

       This is the "argv variant" of "guestfs_hivex_open".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_hivex_root
        int64_t
        guestfs_hivex_root (guestfs_h *g);

       Return the root node of the hive.

       This is a wrapper around the hivex(3) call of the same name.

       On error this function returns -1.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_value_key
        char *
        guestfs_hivex_value_key (guestfs_h *g,
                                 int64_t valueh);

       Return the key (name) field of a (key, datatype, data) tuple.

       This is a wrapper around the hivex(3) call of the same name.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_value_string
        char *
        guestfs_hivex_value_string (guestfs_h *g,
                                    int64_t valueh);

       This calls "guestfs_hivex_value_value" (which returns the data field from a hivex value
       tuple).  It then assumes that the field is a UTF-16LE string and converts the result to
       UTF-8 (or if this is not possible, it returns an error).

       This is useful for reading strings out of the Windows registry.  However it is not
       foolproof because the registry is not strongly-typed and fields can contain arbitrary or
       unexpected data.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.37.22)

   guestfs_hivex_value_type
        int64_t
        guestfs_hivex_value_type (guestfs_h *g,
                                  int64_t valueh);

       Return the data type field from a (key, datatype, data) tuple.

       This is a wrapper around the hivex(3) call of the same name.

       On error this function returns -1.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_value_utf8
        char *
        guestfs_hivex_value_utf8 (guestfs_h *g,
                                  int64_t valueh);

       This function is deprecated.  In new code, use the "guestfs_hivex_value_string" call
       instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls "guestfs_hivex_value_value" (which returns the data field from a hivex value
       tuple).  It then assumes that the field is a UTF-16LE string and converts the result to
       UTF-8 (or if this is not possible, it returns an error).

       This is useful for reading strings out of the Windows registry.  However it is not
       foolproof because the registry is not strongly-typed and fields can contain arbitrary or
       unexpected data.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_hivex_value_value
        char *
        guestfs_hivex_value_value (guestfs_h *g,
                                   int64_t valueh,
                                   size_t *size_r);

       Return the data field of a (key, datatype, data) tuple.

       This is a wrapper around the hivex(3) call of the same name.

       See also: "guestfs_hivex_value_utf8".

       This function returns a buffer, or NULL on error.  The size of the returned buffer is
       written to *size_r.  The caller must free the returned buffer after use.

       This function depends on the feature "hivex".  See also "guestfs_feature_available".

       (Added in 1.19.35)

   guestfs_initrd_cat
        char *
        guestfs_initrd_cat (guestfs_h *g,
                            const char *initrdpath,
                            const char *filename,
                            size_t *size_r);

       This command unpacks the file filename from the initrd file called initrdpath.  The
       filename must be given without the initial / character.

       For example, in guestfish you could use the following command to examine the boot script
       (usually called /init) contained in a Linux initrd or initramfs image:

        initrd-cat /boot/initrd-<version>.img init

       See also "guestfs_initrd_list".

       This function returns a buffer, or NULL on error.  The size of the returned buffer is
       written to *size_r.  The caller must free the returned buffer after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.84)

   guestfs_initrd_list
        char **
        guestfs_initrd_list (guestfs_h *g,
                             const char *path);

       This command lists out files contained in an initrd.

       The files are listed without any initial / character.  The files are listed in the order
       they appear (not necessarily alphabetical).  Directory names are listed as separate items.

       Old Linux kernels (2.4 and earlier) used a compressed ext2 filesystem as initrd.  We only
       support the newer initramfs format (compressed cpio files).

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.0.54)

   guestfs_inotify_add_watch
        int64_t
        guestfs_inotify_add_watch (guestfs_h *g,
                                   const char *path,
                                   int mask);

       Watch "path" for the events listed in "mask".

       Note that if "path" is a directory then events within that directory are watched, but this
       does not happen recursively (in subdirectories).

       Note for non-C or non-Linux callers: the inotify events are defined by the Linux kernel
       ABI and are listed in /usr/include/sys/inotify.h.

       On error this function returns -1.

       This function depends on the feature "inotify".  See also "guestfs_feature_available".

       (Added in 1.0.66)

   guestfs_inotify_close
        int
        guestfs_inotify_close (guestfs_h *g);

       This closes the inotify handle which was previously opened by inotify_init.  It removes
       all watches, throws away any pending events, and deallocates all resources.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "inotify".  See also "guestfs_feature_available".

       (Added in 1.0.66)

   guestfs_inotify_files
        char **
        guestfs_inotify_files (guestfs_h *g);

       This function is a helpful wrapper around "guestfs_inotify_read" which just returns a list
       of pathnames of objects that were touched.  The returned pathnames are sorted and
       deduplicated.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "inotify".  See also "guestfs_feature_available".

       (Added in 1.0.66)

   guestfs_inotify_init
        int
        guestfs_inotify_init (guestfs_h *g,
                              int maxevents);

       This command creates a new inotify handle.  The inotify subsystem can be used to notify
       events which happen to objects in the guest filesystem.

       "maxevents" is the maximum number of events which will be queued up between calls to
       "guestfs_inotify_read" or "guestfs_inotify_files".  If this is passed as 0, then the
       kernel (or previously set) default is used.  For Linux 2.6.29 the default was 16384
       events.  Beyond this limit, the kernel throws away events, but records the fact that it
       threw them away by setting a flag "IN_Q_OVERFLOW" in the returned structure list (see
       "guestfs_inotify_read").

       Before any events are generated, you have to add some watches to the internal watch list.
       See: "guestfs_inotify_add_watch" and "guestfs_inotify_rm_watch".

       Queued up events should be read periodically by calling "guestfs_inotify_read" (or
       "guestfs_inotify_files" which is just a helpful wrapper around "guestfs_inotify_read").
       If you don't read the events out often enough then you risk the internal queue
       overflowing.

       The handle should be closed after use by calling "guestfs_inotify_close".  This also
       removes any watches automatically.

       See also inotify(7) for an overview of the inotify interface as exposed by the Linux
       kernel, which is roughly what we expose via libguestfs.  Note that there is one global
       inotify handle per libguestfs instance.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "inotify".  See also "guestfs_feature_available".

       (Added in 1.0.66)

   guestfs_inotify_read
        struct guestfs_inotify_event_list *
        guestfs_inotify_read (guestfs_h *g);

       Return the complete queue of events that have happened since the previous read call.

       If no events have happened, this returns an empty list.

       Note: In order to make sure that all events have been read, you must call this function
       repeatedly until it returns an empty list.  The reason is that the call will read events
       up to the maximum appliance-to-host message size and leave remaining events in the queue.

       This function returns a "struct guestfs_inotify_event_list *", or NULL if there was an
       error.  The caller must call "guestfs_free_inotify_event_list" after use.

       This function depends on the feature "inotify".  See also "guestfs_feature_available".

       (Added in 1.0.66)

   guestfs_inotify_rm_watch
        int
        guestfs_inotify_rm_watch (guestfs_h *g,
                                  int wd);

       Remove a previously defined inotify watch.  See "guestfs_inotify_add_watch".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "inotify".  See also "guestfs_feature_available".

       (Added in 1.0.66)

   guestfs_inspect_get_arch
        char *
        guestfs_inspect_get_arch (guestfs_h *g,
                                  const char *root);

       This returns the architecture of the inspected operating system.  The possible return
       values are listed under "guestfs_file_architecture".

       If the architecture could not be determined, then the string "unknown" is returned.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.5.3)

   guestfs_inspect_get_distro
        char *
        guestfs_inspect_get_distro (guestfs_h *g,
                                    const char *root);

       This returns the distro (distribution) of the inspected operating system.

       Currently defined distros are:

       "alpinelinux"
           Alpine Linux.

       "altlinux"
           ALT Linux.

       "archlinux"
           Arch Linux.

       "buildroot"
           Buildroot-derived distro, but not one we specifically recognize.

       "centos"
           CentOS.

       "cirros"
           Cirros.

       "coreos"
           CoreOS.

       "debian"
           Debian.

       "fedora"
           Fedora.

       "freebsd"
           FreeBSD.

       "freedos"
           FreeDOS.

       "frugalware"
           Frugalware.

       "gentoo"
           Gentoo.

       "kalilinux"
           Kali Linux.

       "kylin"
           Kylin.

       "linuxmint"
           Linux Mint.

       "mageia"
           Mageia.

       "mandriva"
           Mandriva.

       "meego"
           MeeGo.

       "msdos"
           Microsoft DOS.

       "neokylin"
           NeoKylin.

       "netbsd"
           NetBSD.

       "openbsd"
           OpenBSD.

       "openmandriva"
           OpenMandriva Lx.

       "opensuse"
           OpenSUSE.

       "oraclelinux"
           Oracle Linux.

       "pardus"
           Pardus.

       "pldlinux"
           PLD Linux.

       "redhat-based"
           Some Red Hat-derived distro.

       "rhel"
           Red Hat Enterprise Linux.

       "rocky"
           Rocky Linux.

       "scientificlinux"
           Scientific Linux.

       "slackware"
           Slackware.

       "sles"
           SuSE Linux Enterprise Server or Desktop.

       "suse-based"
           Some openSuSE-derived distro.

       "ttylinux"
           ttylinux.

       "ubuntu"
           Ubuntu.

       "unknown"
           The distro could not be determined.

       "voidlinux"
           Void Linux.

       "windows"
           Windows does not have distributions.  This string is returned if the OS type is
           Windows.

       Future versions of libguestfs may return other strings here.  The caller should be
       prepared to handle any string.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.5.3)

   guestfs_inspect_get_drive_mappings
        char **
        guestfs_inspect_get_drive_mappings (guestfs_h *g,
                                            const char *root);

       This call is useful for Windows which uses a primitive system of assigning drive letters
       (like C:\) to partitions.  This inspection API examines the Windows Registry to find out
       how disks/partitions are mapped to drive letters, and returns a hash table as in the
       example below:

        C      =>     /dev/vda2
        E      =>     /dev/vdb1
        F      =>     /dev/vdc1

       Note that keys are drive letters.  For Windows, the key is case insensitive and just
       contains the drive letter, without the customary colon separator character.

       In future we may support other operating systems that also used drive letters, but the
       keys for those might not be case insensitive and might be longer than 1 character.  For
       example in OS-9, hard drives were named "h0", "h1" etc.

       For Windows guests, currently only hard drive mappings are returned.  Removable disks (eg.
       DVD-ROMs) are ignored.

       For guests that do not use drive mappings, or if the drive mappings could not be
       determined, this returns an empty hash table.

       Please read "INSPECTION" for more details.  See also "guestfs_inspect_get_mountpoints",
       "guestfs_inspect_get_filesystems".

       This function returns a NULL-terminated array of strings, or NULL if there was an error.
       The array of strings will always have length "2n+1", where "n" keys and values alternate,
       followed by the trailing NULL entry.  The caller must free the strings and the array after
       use.

       (Added in 1.9.17)

   guestfs_inspect_get_filesystems
        char **
        guestfs_inspect_get_filesystems (guestfs_h *g,
                                         const char *root);

       This returns a list of all the filesystems that we think are associated with this
       operating system.  This includes the root filesystem, other ordinary filesystems, and non-
       mounted devices like swap partitions.

       In the case of a multi-boot virtual machine, it is possible for a filesystem to be shared
       between operating systems.

       Please read "INSPECTION" for more details.  See also "guestfs_inspect_get_mountpoints".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.5.3)

   guestfs_inspect_get_format
        char *
        guestfs_inspect_get_format (guestfs_h *g,
                                    const char *root);

       This function is deprecated.  There is no replacement.  Consult the API documentation in
       guestfs(3) for further information.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       Before libguestfs 1.38, there was some unreliable support for detecting installer CDs.
       This API would return:

       "installed"
           This is an installed operating system.

       "installer"
           The disk image being inspected is not an installed operating system, but a bootable
           install disk, live CD, or similar.

       "unknown"
           The format of this disk image is not known.

       In libguestfs ≥ 1.38, this only returns "installed".  Use libosinfo directly to detect
       installer CDs.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.9.4)

   guestfs_inspect_get_hostname
        char *
        guestfs_inspect_get_hostname (guestfs_h *g,
                                      const char *root);

       This function returns the hostname of the operating system as found by inspection of the
       guest’s configuration files.

       If the hostname could not be determined, then the string "unknown" is returned.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.7.9)

   guestfs_inspect_get_icon
        char *
        guestfs_inspect_get_icon (guestfs_h *g,
                                  const char *root,
                                  size_t *size_r,
                                  ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_INSPECT_GET_ICON_FAVICON, int favicon,
        GUESTFS_INSPECT_GET_ICON_HIGHQUALITY, int highquality,

       This function returns an icon corresponding to the inspected operating system.  The icon
       is returned as a buffer containing a PNG image (re-encoded to PNG if necessary).

       If it was not possible to get an icon this function returns a zero-length (non-NULL)
       buffer.  Callers must check for this case.

       Libguestfs will start by looking for a file called /etc/favicon.png or C:\etc\favicon.png
       and if it has the correct format, the contents of this file will be returned.  You can
       disable favicons by passing the optional "favicon" boolean as false (default is true).

       If finding the favicon fails, then we look in other places in the guest for a suitable
       icon.

       If the optional "highquality" boolean is true then only high quality icons are returned,
       which means only icons of high resolution with an alpha channel.  The default (false) is
       to return any icon we can, even if it is of substandard quality.

       Notes:

       •   Unlike most other inspection API calls, the guest’s disks must be mounted up before
           you call this, since it needs to read information from the guest filesystem during the
           call.

       •   Security: The icon data comes from the untrusted guest, and should be treated with
           caution.  PNG files have been known to contain exploits.  Ensure that libpng (or other
           relevant libraries) are fully up to date before trying to process or display the icon.

       •   The PNG image returned can be any size.  It might not be square.  Libguestfs tries to
           return the largest, highest quality icon available.  The application must scale the
           icon to the required size.

       •   Extracting icons from Windows guests requires the external wrestool(1) program from
           the "icoutils" package, and several programs (bmptopnm(1), pnmtopng(1), pamcut(1))
           from the "netpbm" package.  These must be installed separately.

       •   Operating system icons are usually trademarks.  Seek legal advice before using
           trademarks in applications.

       This function returns a buffer, or NULL on error.  The size of the returned buffer is
       written to *size_r.  The caller must free the returned buffer after use.

       (Added in 1.11.12)

   guestfs_inspect_get_icon_va
        char *
        guestfs_inspect_get_icon_va (guestfs_h *g,
                                     const char *root,
                                     size_t *size_r,
                                     va_list args);

       This is the "va_list variant" of "guestfs_inspect_get_icon".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_inspect_get_icon_argv
        char *
        guestfs_inspect_get_icon_argv (guestfs_h *g,
                                       const char *root,
                                       size_t *size_r,
                                       const struct guestfs_inspect_get_icon_argv *optargs);

       This is the "argv variant" of "guestfs_inspect_get_icon".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_inspect_get_major_version
        int
        guestfs_inspect_get_major_version (guestfs_h *g,
                                           const char *root);

       This returns the major version number of the inspected operating system.

       Windows uses a consistent versioning scheme which is not reflected in the popular public
       names used by the operating system.  Notably the operating system known as "Windows 7" is
       really version 6.1 (ie. major = 6, minor = 1).  You can find out the real versions
       corresponding to releases of Windows by consulting Wikipedia or MSDN.

       If the version could not be determined, then 0 is returned.

       Please read "INSPECTION" for more details.

       On error this function returns -1.

       (Added in 1.5.3)

   guestfs_inspect_get_minor_version
        int
        guestfs_inspect_get_minor_version (guestfs_h *g,
                                           const char *root);

       This returns the minor version number of the inspected operating system.

       If the version could not be determined, then 0 is returned.

       Please read "INSPECTION" for more details.  See also "guestfs_inspect_get_major_version".

       On error this function returns -1.

       (Added in 1.5.3)

   guestfs_inspect_get_mountpoints
        char **
        guestfs_inspect_get_mountpoints (guestfs_h *g,
                                         const char *root);

       This returns a hash of where we think the filesystems associated with this operating
       system should be mounted.  Callers should note that this is at best an educated guess made
       by reading configuration files such as /etc/fstab.  In particular note that this may
       return filesystems which are non-existent or not mountable and callers should be prepared
       to handle or ignore failures if they try to mount them.

       Each element in the returned hashtable has a key which is the path of the mountpoint (eg.
       /boot) and a value which is the filesystem that would be mounted there (eg. /dev/sda1).

       Non-mounted devices such as swap devices are not returned in this list.

       For operating systems like Windows which still use drive letters, this call will only
       return an entry for the first drive "mounted on" /.  For information about the mapping of
       drive letters to partitions, see "guestfs_inspect_get_drive_mappings".

       Please read "INSPECTION" for more details.  See also "guestfs_inspect_get_filesystems".

       This function returns a NULL-terminated array of strings, or NULL if there was an error.
       The array of strings will always have length "2n+1", where "n" keys and values alternate,
       followed by the trailing NULL entry.  The caller must free the strings and the array after
       use.

       (Added in 1.5.3)

   guestfs_inspect_get_osinfo
        char *
        guestfs_inspect_get_osinfo (guestfs_h *g,
                                    const char *root);

       This function returns a possible short ID for libosinfo corresponding to the guest.

       Note: The returned ID is only a guess by libguestfs, and nothing ensures that it actually
       exists in osinfo-db.

       If no ID could not be determined, then the string "unknown" is returned.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.39.1)

   guestfs_inspect_get_package_format
        char *
        guestfs_inspect_get_package_format (guestfs_h *g,
                                            const char *root);

       This function and "guestfs_inspect_get_package_management" return the package format and
       package management tool used by the inspected operating system.  For example for Fedora
       these functions would return "rpm" (package format), and "yum" or "dnf" (package
       management).

       This returns the string "unknown" if we could not determine the package format or if the
       operating system does not have a real packaging system (eg. Windows).

       Possible strings include: "rpm", "deb", "ebuild", "pisi", "pacman", "pkgsrc", "apk",
       "xbps".  Future versions of libguestfs may return other strings.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.7.5)

   guestfs_inspect_get_package_management
        char *
        guestfs_inspect_get_package_management (guestfs_h *g,
                                                const char *root);

       "guestfs_inspect_get_package_format" and this function return the package format and
       package management tool used by the inspected operating system.  For example for Fedora
       these functions would return "rpm" (package format), and "yum" or "dnf" (package
       management).

       This returns the string "unknown" if we could not determine the package management tool or
       if the operating system does not have a real packaging system (eg. Windows).

       Possible strings include: "yum", "dnf", "up2date", "apt" (for all Debian derivatives),
       "portage", "pisi", "pacman", "urpmi", "zypper", "apk", "xbps".  Future versions of
       libguestfs may return other strings.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.7.5)

   guestfs_inspect_get_product_name
        char *
        guestfs_inspect_get_product_name (guestfs_h *g,
                                          const char *root);

       This returns the product name of the inspected operating system.  The product name is
       generally some freeform string which can be displayed to the user, but should not be
       parsed by programs.

       If the product name could not be determined, then the string "unknown" is returned.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.5.3)

   guestfs_inspect_get_product_variant
        char *
        guestfs_inspect_get_product_variant (guestfs_h *g,
                                             const char *root);

       This returns the product variant of the inspected operating system.

       For Windows guests, this returns the contents of the Registry key
       "HKLM\Software\Microsoft\Windows NT\CurrentVersion" "InstallationType" which is usually a
       string such as "Client" or "Server" (other values are possible).  This can be used to
       distinguish consumer and enterprise versions of Windows that have the same version number
       (for example, Windows 7 and Windows 2008 Server are both version 6.1, but the former is
       "Client" and the latter is "Server").

       For enterprise Linux guests, in future we intend this to return the product variant such
       as "Desktop", "Server" and so on.  But this is not implemented at present.

       If the product variant could not be determined, then the string "unknown" is returned.

       Please read "INSPECTION" for more details.  See also "guestfs_inspect_get_product_name",
       "guestfs_inspect_get_major_version".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.9.13)

   guestfs_inspect_get_roots
        char **
        guestfs_inspect_get_roots (guestfs_h *g);

       This function is a convenient way to get the list of root devices, as returned from a
       previous call to "guestfs_inspect_os", but without redoing the whole inspection process.

       This returns an empty list if either no root devices were found or the caller has not
       called "guestfs_inspect_os".

       Please read "INSPECTION" for more details.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.7.3)

   guestfs_inspect_get_type
        char *
        guestfs_inspect_get_type (guestfs_h *g,
                                  const char *root);

       This returns the type of the inspected operating system.  Currently defined types are:

       "linux"
           Any Linux-based operating system.

       "windows"
           Any Microsoft Windows operating system.

       "freebsd"
           FreeBSD.

       "netbsd"
           NetBSD.

       "openbsd"
           OpenBSD.

       "hurd"
           GNU/Hurd.

       "dos"
           MS-DOS, FreeDOS and others.

       "minix"
           MINIX.

       "unknown"
           The operating system type could not be determined.

       Future versions of libguestfs may return other strings here.  The caller should be
       prepared to handle any string.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.5.3)

   guestfs_inspect_get_windows_current_control_set
        char *
        guestfs_inspect_get_windows_current_control_set (guestfs_h *g,
                                                         const char *root);

       This returns the Windows CurrentControlSet of the inspected guest.  The CurrentControlSet
       is a registry key name such as "ControlSet001".

       This call assumes that the guest is Windows and that the Registry could be examined by
       inspection.  If this is not the case then an error is returned.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.9.17)

   guestfs_inspect_get_windows_software_hive
        char *
        guestfs_inspect_get_windows_software_hive (guestfs_h *g,
                                                   const char *root);

       This returns the path to the hive (binary Windows Registry file) corresponding to
       HKLM\SOFTWARE.

       This call assumes that the guest is Windows and that the guest has a software hive file
       with the right name.  If this is not the case then an error is returned.  This call does
       not check that the hive is a valid Windows Registry hive.

       You can use "guestfs_hivex_open" to read or write to the hive.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.35.26)

   guestfs_inspect_get_windows_system_hive
        char *
        guestfs_inspect_get_windows_system_hive (guestfs_h *g,
                                                 const char *root);

       This returns the path to the hive (binary Windows Registry file) corresponding to
       HKLM\SYSTEM.

       This call assumes that the guest is Windows and that the guest has a system hive file with
       the right name.  If this is not the case then an error is returned.  This call does not
       check that the hive is a valid Windows Registry hive.

       You can use "guestfs_hivex_open" to read or write to the hive.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.35.26)

   guestfs_inspect_get_windows_systemroot
        char *
        guestfs_inspect_get_windows_systemroot (guestfs_h *g,
                                                const char *root);

       This returns the Windows systemroot of the inspected guest.  The systemroot is a directory
       path such as /WINDOWS.

       This call assumes that the guest is Windows and that the systemroot could be determined by
       inspection.  If this is not the case then an error is returned.

       Please read "INSPECTION" for more details.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.5.25)

   guestfs_inspect_is_live
        int
        guestfs_inspect_is_live (guestfs_h *g,
                                 const char *root);

       This function is deprecated.  There is no replacement.  Consult the API documentation in
       guestfs(3) for further information.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This is deprecated and always returns "false".

       Please read "INSPECTION" for more details.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.9.4)

   guestfs_inspect_is_multipart
        int
        guestfs_inspect_is_multipart (guestfs_h *g,
                                      const char *root);

       This function is deprecated.  There is no replacement.  Consult the API documentation in
       guestfs(3) for further information.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This is deprecated and always returns "false".

       Please read "INSPECTION" for more details.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.9.4)

   guestfs_inspect_is_netinst
        int
        guestfs_inspect_is_netinst (guestfs_h *g,
                                    const char *root);

       This function is deprecated.  There is no replacement.  Consult the API documentation in
       guestfs(3) for further information.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This is deprecated and always returns "false".

       Please read "INSPECTION" for more details.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.9.4)

   guestfs_inspect_list_applications
        struct guestfs_application_list *
        guestfs_inspect_list_applications (guestfs_h *g,
                                           const char *root);

       This function is deprecated.  In new code, use the "guestfs_inspect_list_applications2"
       call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       Return the list of applications installed in the operating system.

       Note: This call works differently from other parts of the inspection API.  You have to
       call "guestfs_inspect_os", then "guestfs_inspect_get_mountpoints", then mount up the
       disks, before calling this.  Listing applications is a significantly more difficult
       operation which requires access to the full filesystem.  Also note that unlike the other
       "guestfs_inspect_get_*" calls which are just returning data cached in the libguestfs
       handle, this call actually reads parts of the mounted filesystems during the call.

       This returns an empty list if the inspection code was not able to determine the list of
       applications.

       The application structure contains the following fields:

       "app_name"
           The name of the application.  For Linux guests, this is the package name.

       "app_display_name"
           The display name of the application, sometimes localized to the install language of
           the guest operating system.

           If unavailable this is returned as an empty string "".  Callers needing to display
           something can use "app_name" instead.

       "app_epoch"
           For package managers which use epochs, this contains the epoch of the package (an
           integer).  If unavailable, this is returned as 0.

       "app_version"
           The version string of the application or package.  If unavailable this is returned as
           an empty string "".

       "app_release"
           The release string of the application or package, for package managers that use this.
           If unavailable this is returned as an empty string "".

       "app_install_path"
           The installation path of the application (on operating systems such as Windows which
           use installation paths).  This path is in the format used by the guest operating
           system, it is not a libguestfs path.

           If unavailable this is returned as an empty string "".

       "app_trans_path"
           The install path translated into a libguestfs path.  If unavailable this is returned
           as an empty string "".

       "app_publisher"
           The name of the publisher of the application, for package managers that use this.  If
           unavailable this is returned as an empty string "".

       "app_url"
           The URL (eg. upstream URL) of the application.  If unavailable this is returned as an
           empty string "".

       "app_source_package"
           For packaging systems which support this, the name of the source package.  If
           unavailable this is returned as an empty string "".

       "app_summary"
           A short (usually one line) description of the application or package.  If unavailable
           this is returned as an empty string "".

       "app_description"
           A longer description of the application or package.  If unavailable this is returned
           as an empty string "".

       Please read "INSPECTION" for more details.

       This function returns a "struct guestfs_application_list *", or NULL if there was an
       error.  The caller must call "guestfs_free_application_list" after use.

       (Added in 1.7.8)

   guestfs_inspect_list_applications2
        struct guestfs_application2_list *
        guestfs_inspect_list_applications2 (guestfs_h *g,
                                            const char *root);

       Return the list of applications installed in the operating system.

       Note: This call works differently from other parts of the inspection API.  You have to
       call "guestfs_inspect_os", then "guestfs_inspect_get_mountpoints", then mount up the
       disks, before calling this.  Listing applications is a significantly more difficult
       operation which requires access to the full filesystem.  Also note that unlike the other
       "guestfs_inspect_get_*" calls which are just returning data cached in the libguestfs
       handle, this call actually reads parts of the mounted filesystems during the call.

       This returns an empty list if the inspection code was not able to determine the list of
       applications.

       The application structure contains the following fields:

       "app2_name"
           The name of the application.  For Linux guests, this is the package name.

       "app2_display_name"
           The display name of the application, sometimes localized to the install language of
           the guest operating system.

           If unavailable this is returned as an empty string "".  Callers needing to display
           something can use "app2_name" instead.

       "app2_epoch"
           For package managers which use epochs, this contains the epoch of the package (an
           integer).  If unavailable, this is returned as 0.

       "app2_version"
           The version string of the application or package.  If unavailable this is returned as
           an empty string "".

       "app2_release"
           The release string of the application or package, for package managers that use this.
           If unavailable this is returned as an empty string "".

       "app2_arch"
           The architecture string of the application or package, for package managers that use
           this.  If unavailable this is returned as an empty string "".

       "app2_install_path"
           The installation path of the application (on operating systems such as Windows which
           use installation paths).  This path is in the format used by the guest operating
           system, it is not a libguestfs path.

           If unavailable this is returned as an empty string "".

       "app2_trans_path"
           The install path translated into a libguestfs path.  If unavailable this is returned
           as an empty string "".

       "app2_publisher"
           The name of the publisher of the application, for package managers that use this.  If
           unavailable this is returned as an empty string "".

       "app2_url"
           The URL (eg. upstream URL) of the application.  If unavailable this is returned as an
           empty string "".

       "app2_source_package"
           For packaging systems which support this, the name of the source package.  If
           unavailable this is returned as an empty string "".

       "app2_summary"
           A short (usually one line) description of the application or package.  If unavailable
           this is returned as an empty string "".

       "app2_description"
           A longer description of the application or package.  If unavailable this is returned
           as an empty string "".

       Please read "INSPECTION" for more details.

       This function returns a "struct guestfs_application2_list *", or NULL if there was an
       error.  The caller must call "guestfs_free_application2_list" after use.

       (Added in 1.19.56)

   guestfs_inspect_os
        char **
        guestfs_inspect_os (guestfs_h *g);

       This function uses other libguestfs functions and certain heuristics to inspect the
       disk(s) (usually disks belonging to a virtual machine), looking for operating systems.

       The list returned is empty if no operating systems were found.

       If one operating system was found, then this returns a list with a single element, which
       is the name of the root filesystem of this operating system.  It is also possible for this
       function to return a list containing more than one element, indicating a dual-boot or
       multi-boot virtual machine, with each element being the root filesystem of one of the
       operating systems.

       You can pass the root string(s) returned to other "guestfs_inspect_get_*" functions in
       order to query further information about each operating system, such as the name and
       version.

       This function uses other libguestfs features such as "guestfs_mount_ro" and
       "guestfs_umount_all" in order to mount and unmount filesystems and look at the contents.
       This should be called with no disks currently mounted.  The function may also use Augeas,
       so any existing Augeas handle will be closed.

       This function cannot decrypt encrypted disks.  The caller must do that first (supplying
       the necessary keys) if the disk is encrypted.

       Please read "INSPECTION" for more details.

       See also "guestfs_list_filesystems".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.5.3)

   guestfs_is_blockdev
        int
        guestfs_is_blockdev (guestfs_h *g,
                             const char *path);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_is_blockdev_opts" with no optional arguments.

       (Added in 1.5.10)

   guestfs_is_blockdev_opts
        int
        guestfs_is_blockdev_opts (guestfs_h *g,
                                  const char *path,
                                  ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_IS_BLOCKDEV_OPTS_FOLLOWSYMLINKS, int followsymlinks,

       This returns "true" if and only if there is a block device with the given "path" name.

       If the optional flag "followsymlinks" is true, then a symlink (or chain of symlinks) that
       ends with a block device also causes the function to return true.

       This call only looks at files within the guest filesystem.  Libguestfs partitions and
       block devices (eg. /dev/sda) cannot be used as the "path" parameter of this call.

       See also "guestfs_stat".

       This function returns a C truth value on success or -1 on error.

       (Added in 1.5.10)

   guestfs_is_blockdev_opts_va
        int
        guestfs_is_blockdev_opts_va (guestfs_h *g,
                                     const char *path,
                                     va_list args);

       This is the "va_list variant" of "guestfs_is_blockdev_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_blockdev_opts_argv
        int
        guestfs_is_blockdev_opts_argv (guestfs_h *g,
                                       const char *path,
                                       const struct guestfs_is_blockdev_opts_argv *optargs);

       This is the "argv variant" of "guestfs_is_blockdev_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_busy
        int
        guestfs_is_busy (guestfs_h *g);

       This always returns false.  This function is deprecated with no replacement.  Do not use
       this function.

       For more information on states, see guestfs(3).

       This function returns a C truth value on success or -1 on error.

       (Added in 1.0.2)

   guestfs_is_chardev
        int
        guestfs_is_chardev (guestfs_h *g,
                            const char *path);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_is_chardev_opts" with no optional arguments.

       (Added in 1.5.10)

   guestfs_is_chardev_opts
        int
        guestfs_is_chardev_opts (guestfs_h *g,
                                 const char *path,
                                 ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_IS_CHARDEV_OPTS_FOLLOWSYMLINKS, int followsymlinks,

       This returns "true" if and only if there is a character device with the given "path" name.

       If the optional flag "followsymlinks" is true, then a symlink (or chain of symlinks) that
       ends with a chardev also causes the function to return true.

       See also "guestfs_stat".

       This function returns a C truth value on success or -1 on error.

       (Added in 1.5.10)

   guestfs_is_chardev_opts_va
        int
        guestfs_is_chardev_opts_va (guestfs_h *g,
                                    const char *path,
                                    va_list args);

       This is the "va_list variant" of "guestfs_is_chardev_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_chardev_opts_argv
        int
        guestfs_is_chardev_opts_argv (guestfs_h *g,
                                      const char *path,
                                      const struct guestfs_is_chardev_opts_argv *optargs);

       This is the "argv variant" of "guestfs_is_chardev_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_config
        int
        guestfs_is_config (guestfs_h *g);

       This returns true iff this handle is being configured (in the "CONFIG" state).

       For more information on states, see guestfs(3).

       This function returns a C truth value on success or -1 on error.

       (Added in 1.0.2)

   guestfs_is_dir
        int
        guestfs_is_dir (guestfs_h *g,
                        const char *path);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_is_dir_opts" with no optional arguments.

       (Added in 0.8)

   guestfs_is_dir_opts
        int
        guestfs_is_dir_opts (guestfs_h *g,
                             const char *path,
                             ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_IS_DIR_OPTS_FOLLOWSYMLINKS, int followsymlinks,

       This returns "true" if and only if there is a directory with the given "path" name.  Note
       that it returns false for other objects like files.

       If the optional flag "followsymlinks" is true, then a symlink (or chain of symlinks) that
       ends with a directory also causes the function to return true.

       See also "guestfs_stat".

       This function returns a C truth value on success or -1 on error.

       (Added in 0.8)

   guestfs_is_dir_opts_va
        int
        guestfs_is_dir_opts_va (guestfs_h *g,
                                const char *path,
                                va_list args);

       This is the "va_list variant" of "guestfs_is_dir_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_dir_opts_argv
        int
        guestfs_is_dir_opts_argv (guestfs_h *g,
                                  const char *path,
                                  const struct guestfs_is_dir_opts_argv *optargs);

       This is the "argv variant" of "guestfs_is_dir_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_fifo
        int
        guestfs_is_fifo (guestfs_h *g,
                         const char *path);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_is_fifo_opts" with no optional arguments.

       (Added in 1.5.10)

   guestfs_is_fifo_opts
        int
        guestfs_is_fifo_opts (guestfs_h *g,
                              const char *path,
                              ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_IS_FIFO_OPTS_FOLLOWSYMLINKS, int followsymlinks,

       This returns "true" if and only if there is a FIFO (named pipe) with the given "path"
       name.

       If the optional flag "followsymlinks" is true, then a symlink (or chain of symlinks) that
       ends with a FIFO also causes the function to return true.

       See also "guestfs_stat".

       This function returns a C truth value on success or -1 on error.

       (Added in 1.5.10)

   guestfs_is_fifo_opts_va
        int
        guestfs_is_fifo_opts_va (guestfs_h *g,
                                 const char *path,
                                 va_list args);

       This is the "va_list variant" of "guestfs_is_fifo_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_fifo_opts_argv
        int
        guestfs_is_fifo_opts_argv (guestfs_h *g,
                                   const char *path,
                                   const struct guestfs_is_fifo_opts_argv *optargs);

       This is the "argv variant" of "guestfs_is_fifo_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_file
        int
        guestfs_is_file (guestfs_h *g,
                         const char *path);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_is_file_opts" with no optional arguments.

       (Added in 0.8)

   guestfs_is_file_opts
        int
        guestfs_is_file_opts (guestfs_h *g,
                              const char *path,
                              ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_IS_FILE_OPTS_FOLLOWSYMLINKS, int followsymlinks,

       This returns "true" if and only if there is a regular file with the given "path" name.
       Note that it returns false for other objects like directories.

       If the optional flag "followsymlinks" is true, then a symlink (or chain of symlinks) that
       ends with a file also causes the function to return true.

       See also "guestfs_stat".

       This function returns a C truth value on success or -1 on error.

       (Added in 0.8)

   guestfs_is_file_opts_va
        int
        guestfs_is_file_opts_va (guestfs_h *g,
                                 const char *path,
                                 va_list args);

       This is the "va_list variant" of "guestfs_is_file_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_file_opts_argv
        int
        guestfs_is_file_opts_argv (guestfs_h *g,
                                   const char *path,
                                   const struct guestfs_is_file_opts_argv *optargs);

       This is the "argv variant" of "guestfs_is_file_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_launching
        int
        guestfs_is_launching (guestfs_h *g);

       This returns true iff this handle is launching the subprocess (in the "LAUNCHING" state).

       For more information on states, see guestfs(3).

       This function returns a C truth value on success or -1 on error.

       (Added in 1.0.2)

   guestfs_is_lv
        int
        guestfs_is_lv (guestfs_h *g,
                       const char *mountable);

       This command tests whether "mountable" is a logical volume, and returns true iff this is
       the case.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.5.3)

   guestfs_is_ready
        int
        guestfs_is_ready (guestfs_h *g);

       This returns true iff this handle is ready to accept commands (in the "READY" state).

       For more information on states, see guestfs(3).

       This function returns a C truth value on success or -1 on error.

       (Added in 1.0.2)

   guestfs_is_socket
        int
        guestfs_is_socket (guestfs_h *g,
                           const char *path);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_is_socket_opts" with no optional arguments.

       (Added in 1.5.10)

   guestfs_is_socket_opts
        int
        guestfs_is_socket_opts (guestfs_h *g,
                                const char *path,
                                ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_IS_SOCKET_OPTS_FOLLOWSYMLINKS, int followsymlinks,

       This returns "true" if and only if there is a Unix domain socket with the given "path"
       name.

       If the optional flag "followsymlinks" is true, then a symlink (or chain of symlinks) that
       ends with a socket also causes the function to return true.

       See also "guestfs_stat".

       This function returns a C truth value on success or -1 on error.

       (Added in 1.5.10)

   guestfs_is_socket_opts_va
        int
        guestfs_is_socket_opts_va (guestfs_h *g,
                                   const char *path,
                                   va_list args);

       This is the "va_list variant" of "guestfs_is_socket_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_socket_opts_argv
        int
        guestfs_is_socket_opts_argv (guestfs_h *g,
                                     const char *path,
                                     const struct guestfs_is_socket_opts_argv *optargs);

       This is the "argv variant" of "guestfs_is_socket_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_is_symlink
        int
        guestfs_is_symlink (guestfs_h *g,
                            const char *path);

       This returns "true" if and only if there is a symbolic link with the given "path" name.

       See also "guestfs_stat".

       This function returns a C truth value on success or -1 on error.

       (Added in 1.5.10)

   guestfs_is_whole_device
        int
        guestfs_is_whole_device (guestfs_h *g,
                                 const char *device);

       This returns "true" if and only if "device" refers to a whole block device. That is, not a
       partition or a logical device.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.21.9)

   guestfs_is_zero
        int
        guestfs_is_zero (guestfs_h *g,
                         const char *path);

       This returns true iff the file exists and the file is empty or it contains all zero bytes.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.11.8)

   guestfs_is_zero_device
        int
        guestfs_is_zero_device (guestfs_h *g,
                                const char *device);

       This returns true iff the device exists and contains all zero bytes.

       Note that for large devices this can take a long time to run.

       This function returns a C truth value on success or -1 on error.

       (Added in 1.11.8)

   guestfs_isoinfo
        struct guestfs_isoinfo *
        guestfs_isoinfo (guestfs_h *g,
                         const char *isofile);

       This is the same as "guestfs_isoinfo_device" except that it works for an ISO file located
       inside some other mounted filesystem.  Note that in the common case where you have added
       an ISO file as a libguestfs device, you would not call this.  Instead you would call
       "guestfs_isoinfo_device".

       This function returns a "struct guestfs_isoinfo *", or NULL if there was an error.  The
       caller must call "guestfs_free_isoinfo" after use.

       (Added in 1.17.19)

   guestfs_isoinfo_device
        struct guestfs_isoinfo *
        guestfs_isoinfo_device (guestfs_h *g,
                                const char *device);

       "device" is an ISO device.  This returns a struct of information read from the primary
       volume descriptor (the ISO equivalent of the superblock) of the device.

       Usually it is more efficient to use the isoinfo(1) command with the -d option on the host
       to analyze ISO files, instead of going through libguestfs.

       For information on the primary volume descriptor fields, see
       https://wiki.osdev.org/ISO_9660#The_Primary_Volume_Descriptor

       This function returns a "struct guestfs_isoinfo *", or NULL if there was an error.  The
       caller must call "guestfs_free_isoinfo" after use.

       (Added in 1.17.19)

   guestfs_journal_close
        int
        guestfs_journal_close (guestfs_h *g);

       Close the journal handle.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "journal".  See also "guestfs_feature_available".

       (Added in 1.23.11)

   guestfs_journal_get
        struct guestfs_xattr_list *
        guestfs_journal_get (guestfs_h *g);

       Read the current journal entry.  This returns all the fields in the journal as a set of
       "(attrname, attrval)" pairs.  The "attrname" is the field name (a string).

       The "attrval" is the field value (a binary blob, often but not always a string).  Please
       note that "attrval" is a byte array, not a \0-terminated C string.

       The length of data may be truncated to the data threshold (see:
       "guestfs_journal_set_data_threshold", "guestfs_journal_get_data_threshold").

       If you set the data threshold to unlimited (0) then this call can read a journal entry of
       any size, ie. it is not limited by the libguestfs protocol.

       This function returns a "struct guestfs_xattr_list *", or NULL if there was an error.  The
       caller must call "guestfs_free_xattr_list" after use.

       This function depends on the feature "journal".  See also "guestfs_feature_available".

       (Added in 1.23.11)

   guestfs_journal_get_data_threshold
        int64_t
        guestfs_journal_get_data_threshold (guestfs_h *g);

       Get the current data threshold for reading journal entries.  This is a hint to the journal
       that it may truncate data fields to this size when reading them (note also that it may not
       truncate them).  If this returns 0, then the threshold is unlimited.

       See also "guestfs_journal_set_data_threshold".

       On error this function returns -1.

       This function depends on the feature "journal".  See also "guestfs_feature_available".

       (Added in 1.23.11)

   guestfs_journal_get_realtime_usec
        int64_t
        guestfs_journal_get_realtime_usec (guestfs_h *g);

       Get the realtime (wallclock) timestamp of the current journal entry.

       On error this function returns -1.

       This function depends on the feature "journal".  See also "guestfs_feature_available".

       (Added in 1.27.18)

   guestfs_journal_next
        int
        guestfs_journal_next (guestfs_h *g);

       Move to the next journal entry.  You have to call this at least once after opening the
       handle before you are able to read data.

       The returned boolean tells you if there are any more journal records to read.  "true"
       means you can read the next record (eg. using "guestfs_journal_get"), and "false" means
       you have reached the end of the journal.

       This function returns a C truth value on success or -1 on error.

       This function depends on the feature "journal".  See also "guestfs_feature_available".

       (Added in 1.23.11)

   guestfs_journal_open
        int
        guestfs_journal_open (guestfs_h *g,
                              const char *directory);

       Open the systemd journal located in directory.  Any previously opened journal handle is
       closed.

       The contents of the journal can be read using "guestfs_journal_next" and
       "guestfs_journal_get".

       After you have finished using the journal, you should close the handle by calling
       "guestfs_journal_close".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "journal".  See also "guestfs_feature_available".

       (Added in 1.23.11)

   guestfs_journal_set_data_threshold
        int
        guestfs_journal_set_data_threshold (guestfs_h *g,
                                            int64_t threshold);

       Set the data threshold for reading journal entries.  This is a hint to the journal that it
       may truncate data fields to this size when reading them (note also that it may not
       truncate them).  If you set this to 0, then the threshold is unlimited.

       See also "guestfs_journal_get_data_threshold".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "journal".  See also "guestfs_feature_available".

       (Added in 1.23.11)

   guestfs_journal_skip
        int64_t
        guestfs_journal_skip (guestfs_h *g,
                              int64_t skip);

       Skip forwards ("skip ≥ 0") or backwards ("skip < 0") in the journal.

       The number of entries actually skipped is returned (note "rskip ≥ 0").  If this is not the
       same as the absolute value of the skip parameter ("|skip|") you passed in then it means
       you have reached the end or the start of the journal.

       On error this function returns -1.

       This function depends on the feature "journal".  See also "guestfs_feature_available".

       (Added in 1.23.11)

   guestfs_kill_subprocess
        int
        guestfs_kill_subprocess (guestfs_h *g);

       This function is deprecated.  In new code, use the "guestfs_shutdown" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This kills the hypervisor.

       Do not call this.  See: "guestfs_shutdown" instead.

       This function returns 0 on success or -1 on error.

       (Added in 0.3)

   guestfs_launch
        int
        guestfs_launch (guestfs_h *g);

       You should call this after configuring the handle (eg. adding drives) but before
       performing any actions.

       Do not call "guestfs_launch" twice on the same handle.  Although it will not give an error
       (for historical reasons), the precise behaviour when you do this is not well defined.
       Handles are very cheap to create, so create a new one for each launch.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 0.3)

   guestfs_lchown
        int
        guestfs_lchown (guestfs_h *g,
                        int owner,
                        int group,
                        const char *path);

       Change the file owner to "owner" and group to "group".  This is like "guestfs_chown" but
       if "path" is a symlink then the link itself is changed, not the target.

       Only numeric uid and gid are supported.  If you want to use names, you will need to locate
       and parse the password file yourself (Augeas support makes this relatively easy).

       This function returns 0 on success or -1 on error.

       (Added in 1.0.77)

   guestfs_ldmtool_create_all
        int
        guestfs_ldmtool_create_all (guestfs_h *g);

       This function scans all block devices looking for Windows dynamic disk volumes and
       partitions, and creates devices for any that were found.

       Call "guestfs_list_ldm_volumes" and "guestfs_list_ldm_partitions" to return all devices.

       Note that you don't normally need to call this explicitly, since it is done automatically
       at "guestfs_launch" time.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_ldmtool_diskgroup_disks
        char **
        guestfs_ldmtool_diskgroup_disks (guestfs_h *g,
                                         const char *diskgroup);

       Return the disks in a Windows dynamic disk group.  The "diskgroup" parameter should be the
       GUID of a disk group, one element from the list returned by "guestfs_ldmtool_scan".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_ldmtool_diskgroup_name
        char *
        guestfs_ldmtool_diskgroup_name (guestfs_h *g,
                                        const char *diskgroup);

       Return the name of a Windows dynamic disk group.  The "diskgroup" parameter should be the
       GUID of a disk group, one element from the list returned by "guestfs_ldmtool_scan".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_ldmtool_diskgroup_volumes
        char **
        guestfs_ldmtool_diskgroup_volumes (guestfs_h *g,
                                           const char *diskgroup);

       Return the volumes in a Windows dynamic disk group.  The "diskgroup" parameter should be
       the GUID of a disk group, one element from the list returned by "guestfs_ldmtool_scan".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_ldmtool_remove_all
        int
        guestfs_ldmtool_remove_all (guestfs_h *g);

       This is essentially the opposite of "guestfs_ldmtool_create_all".  It removes the device
       mapper mappings for all Windows dynamic disk volumes

       This function returns 0 on success or -1 on error.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_ldmtool_scan
        char **
        guestfs_ldmtool_scan (guestfs_h *g);

       This function scans for Windows dynamic disks.  It returns a list of identifiers (GUIDs)
       for all disk groups that were found.  These identifiers can be passed to other
       "guestfs_ldmtool_*" functions.

       This function scans all block devices.  To scan a subset of block devices, call
       "guestfs_ldmtool_scan_devices" instead.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_ldmtool_scan_devices
        char **
        guestfs_ldmtool_scan_devices (guestfs_h *g,
                                      char *const *devices);

       This function scans for Windows dynamic disks.  It returns a list of identifiers (GUIDs)
       for all disk groups that were found.  These identifiers can be passed to other
       "guestfs_ldmtool_*" functions.

       The parameter "devices" is a list of block devices which are scanned.  If this list is
       empty, all block devices are scanned.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_ldmtool_volume_hint
        char *
        guestfs_ldmtool_volume_hint (guestfs_h *g,
                                     const char *diskgroup,
                                     const char *volume);

       Return the hint field of the volume named "volume" in the disk group with GUID
       "diskgroup".  This may not be defined, in which case the empty string is returned.  The
       hint field is often, though not always, the name of a Windows drive, eg. "E:".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_ldmtool_volume_partitions
        char **
        guestfs_ldmtool_volume_partitions (guestfs_h *g,
                                           const char *diskgroup,
                                           const char *volume);

       Return the list of partitions in the volume named "volume" in the disk group with GUID
       "diskgroup".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_ldmtool_volume_type
        char *
        guestfs_ldmtool_volume_type (guestfs_h *g,
                                     const char *diskgroup,
                                     const char *volume);

       Return the type of the volume named "volume" in the disk group with GUID "diskgroup".

       Possible volume types that can be returned here include: "simple", "spanned", "striped",
       "mirrored", "raid5".  Other types may also be returned.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_lgetxattr
        char *
        guestfs_lgetxattr (guestfs_h *g,
                           const char *path,
                           const char *name,
                           size_t *size_r);

       Get a single extended attribute from file "path" named "name".  If "path" is a symlink,
       then this call returns an extended attribute from the symlink.

       Normally it is better to get all extended attributes from a file in one go by calling
       "guestfs_getxattrs".  However some Linux filesystem implementations are buggy and do not
       provide a way to list out attributes.  For these filesystems (notably ntfs-3g) you have to
       know the names of the extended attributes you want in advance and call this function.

       Extended attribute values are blobs of binary data.  If there is no extended attribute
       named "name", this returns an error.

       See also: "guestfs_lgetxattrs", "guestfs_getxattr", attr(5).

       This function returns a buffer, or NULL on error.  The size of the returned buffer is
       written to *size_r.  The caller must free the returned buffer after use.

       This function depends on the feature "linuxxattrs".  See also "guestfs_feature_available".

       (Added in 1.7.24)

   guestfs_lgetxattrs
        struct guestfs_xattr_list *
        guestfs_lgetxattrs (guestfs_h *g,
                            const char *path);

       This is the same as "guestfs_getxattrs", but if "path" is a symbolic link, then it returns
       the extended attributes of the link itself.

       This function returns a "struct guestfs_xattr_list *", or NULL if there was an error.  The
       caller must call "guestfs_free_xattr_list" after use.

       This function depends on the feature "linuxxattrs".  See also "guestfs_feature_available".

       (Added in 1.0.59)

   guestfs_list_9p
        char **
        guestfs_list_9p (guestfs_h *g);

       This function is deprecated.  There is no replacement.  Consult the API documentation in
       guestfs(3) for further information.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This call does nothing and returns an error.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.11.12)

   guestfs_list_devices
        char **
        guestfs_list_devices (guestfs_h *g);

       List all the block devices.

       The full block device names are returned, eg. /dev/sda.

       See also "guestfs_list_filesystems".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 0.4)

   guestfs_list_disk_labels
        char **
        guestfs_list_disk_labels (guestfs_h *g);

       If you add drives using the optional "label" parameter of "guestfs_add_drive_opts", you
       can use this call to map between disk labels, and raw block device and partition names
       (like /dev/sda and /dev/sda1).

       This returns a hashtable, where keys are the disk labels (without the /dev/disk/guestfs
       prefix), and the values are the full raw block device and partition names (eg. /dev/sda
       and /dev/sda1).

       This function returns a NULL-terminated array of strings, or NULL if there was an error.
       The array of strings will always have length "2n+1", where "n" keys and values alternate,
       followed by the trailing NULL entry.  The caller must free the strings and the array after
       use.

       (Added in 1.19.49)

   guestfs_list_dm_devices
        char **
        guestfs_list_dm_devices (guestfs_h *g);

       List all device mapper devices.

       The returned list contains /dev/mapper/* devices, eg. ones created by a previous call to
       "guestfs_luks_open".

       Device mapper devices which correspond to logical volumes are not returned in this list.
       Call "guestfs_lvs" if you want to list logical volumes.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.11.15)

   guestfs_list_filesystems
        char **
        guestfs_list_filesystems (guestfs_h *g);

       This inspection command looks for filesystems on partitions, block devices and logical
       volumes, returning a list of "mountables" containing filesystems and their type.

       The return value is a hash, where the keys are the devices containing filesystems, and the
       values are the filesystem types.  For example:

        "/dev/sda1" => "ntfs"
        "/dev/sda2" => "ext2"
        "/dev/vg_guest/lv_root" => "ext4"
        "/dev/vg_guest/lv_swap" => "swap"

       The key is not necessarily a block device. It may also be an opaque ‘mountable’ string
       which can be passed to "guestfs_mount".

       The value can have the special value "unknown", meaning the content of the device is
       undetermined or empty.  "swap" means a Linux swap partition.

       In libguestfs ≤ 1.36 this command ran other libguestfs commands, which might have included
       "guestfs_mount" and "guestfs_umount", and therefore you had to use this soon after launch
       and only when nothing else was mounted.  This restriction is removed in libguestfs ≥ 1.38.

       Not all of the filesystems returned will be mountable.  In particular, swap partitions are
       returned in the list.  Also this command does not check that each filesystem found is
       valid and mountable, and some filesystems might be mountable but require special options.
       Filesystems may not all belong to a single logical operating system (use
       "guestfs_inspect_os" to look for OSes).

       This function returns a NULL-terminated array of strings, or NULL if there was an error.
       The array of strings will always have length "2n+1", where "n" keys and values alternate,
       followed by the trailing NULL entry.  The caller must free the strings and the array after
       use.

       (Added in 1.5.15)

   guestfs_list_ldm_partitions
        char **
        guestfs_list_ldm_partitions (guestfs_h *g);

       This function returns all Windows dynamic disk partitions that were found at launch time.
       It returns a list of device names.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_list_ldm_volumes
        char **
        guestfs_list_ldm_volumes (guestfs_h *g);

       This function returns all Windows dynamic disk volumes that were found at launch time.  It
       returns a list of device names.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "ldm".  See also "guestfs_feature_available".

       (Added in 1.20.0)

   guestfs_list_md_devices
        char **
        guestfs_list_md_devices (guestfs_h *g);

       List all Linux md devices.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.15.4)

   guestfs_list_partitions
        char **
        guestfs_list_partitions (guestfs_h *g);

       List all the partitions detected on all block devices.

       The full partition device names are returned, eg. /dev/sda1

       This does not return logical volumes.  For that you will need to call "guestfs_lvs".

       See also "guestfs_list_filesystems".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 0.4)

   guestfs_ll
        char *
        guestfs_ll (guestfs_h *g,
                    const char *directory);

       List the files in directory (relative to the root directory, there is no cwd) in the
       format of "ls -la".

       This command is mostly useful for interactive sessions.  It is not intended that you try
       to parse the output string.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 0.4)

   guestfs_llz
        char *
        guestfs_llz (guestfs_h *g,
                     const char *directory);

       This function is deprecated.  In new code, use the "guestfs_lgetxattrs" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       List the files in directory in the format of "ls -laZ".

       This command is mostly useful for interactive sessions.  It is not intended that you try
       to parse the output string.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.17.6)

   guestfs_ln
        int
        guestfs_ln (guestfs_h *g,
                    const char *target,
                    const char *linkname);

       This command creates a hard link.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_ln_f
        int
        guestfs_ln_f (guestfs_h *g,
                      const char *target,
                      const char *linkname);

       This command creates a hard link, removing the link "linkname" if it exists already.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_ln_s
        int
        guestfs_ln_s (guestfs_h *g,
                      const char *target,
                      const char *linkname);

       This command creates a symbolic link using the "ln -s" command.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_ln_sf
        int
        guestfs_ln_sf (guestfs_h *g,
                       const char *target,
                       const char *linkname);

       This command creates a symbolic link using the "ln -sf" command, The -f option removes the
       link ("linkname") if it exists already.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_lremovexattr
        int
        guestfs_lremovexattr (guestfs_h *g,
                              const char *xattr,
                              const char *path);

       This is the same as "guestfs_removexattr", but if "path" is a symbolic link, then it
       removes an extended attribute of the link itself.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "linuxxattrs".  See also "guestfs_feature_available".

       (Added in 1.0.59)

   guestfs_ls
        char **
        guestfs_ls (guestfs_h *g,
                    const char *directory);

       List the files in directory (relative to the root directory, there is no cwd).  The "."
       and ".." entries are not returned, but hidden files are shown.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 0.4)

   guestfs_ls0
        int
        guestfs_ls0 (guestfs_h *g,
                     const char *dir,
                     const char *filenames);

       This specialized command is used to get a listing of the filenames in the directory "dir".
       The list of filenames is written to the local file filenames (on the host).

       In the output file, the filenames are separated by "\0" characters.

       "." and ".." are not returned.  The filenames are not sorted.

       This function returns 0 on success or -1 on error.

       (Added in 1.19.32)

   guestfs_lsetxattr
        int
        guestfs_lsetxattr (guestfs_h *g,
                           const char *xattr,
                           const char *val,
                           int vallen,
                           const char *path);

       This is the same as "guestfs_setxattr", but if "path" is a symbolic link, then it sets an
       extended attribute of the link itself.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "linuxxattrs".  See also "guestfs_feature_available".

       (Added in 1.0.59)

   guestfs_lstat
        struct guestfs_stat *
        guestfs_lstat (guestfs_h *g,
                       const char *path);

       This function is deprecated.  In new code, use the "guestfs_lstatns" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       Returns file information for the given "path".

       This is the same as "guestfs_stat" except that if "path" is a symbolic link, then the link
       is stat-ed, not the file it refers to.

       This is the same as the lstat(2) system call.

       This function returns a "struct guestfs_stat *", or NULL if there was an error.  The
       caller must call "guestfs_free_stat" after use.

       (Added in 1.9.2)

   guestfs_lstatlist
        struct guestfs_stat_list *
        guestfs_lstatlist (guestfs_h *g,
                           const char *path,
                           char *const *names);

       This function is deprecated.  In new code, use the "guestfs_lstatnslist" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This call allows you to perform the "guestfs_lstat" operation on multiple files, where all
       files are in the directory "path".  "names" is the list of files from this directory.

       On return you get a list of stat structs, with a one-to-one correspondence to the "names"
       list.  If any name did not exist or could not be lstat'd, then the "st_ino" field of that
       structure is set to "-1".

       This call is intended for programs that want to efficiently list a directory contents
       without making many round-trips.  See also "guestfs_lxattrlist" for a similarly efficient
       call for getting extended attributes.

       This function returns a "struct guestfs_stat_list *", or NULL if there was an error.  The
       caller must call "guestfs_free_stat_list" after use.

       (Added in 1.0.77)

   guestfs_lstatns
        struct guestfs_statns *
        guestfs_lstatns (guestfs_h *g,
                         const char *path);

       Returns file information for the given "path".

       This is the same as "guestfs_statns" except that if "path" is a symbolic link, then the
       link is stat-ed, not the file it refers to.

       This is the same as the lstat(2) system call.

       This function returns a "struct guestfs_statns *", or NULL if there was an error.  The
       caller must call "guestfs_free_statns" after use.

       (Added in 1.27.53)

   guestfs_lstatnslist
        struct guestfs_statns_list *
        guestfs_lstatnslist (guestfs_h *g,
                             const char *path,
                             char *const *names);

       This call allows you to perform the "guestfs_lstatns" operation on multiple files, where
       all files are in the directory "path".  "names" is the list of files from this directory.

       On return you get a list of stat structs, with a one-to-one correspondence to the "names"
       list.  If any name did not exist or could not be lstat'd, then the "st_ino" field of that
       structure is set to "-1".

       This call is intended for programs that want to efficiently list a directory contents
       without making many round-trips.  See also "guestfs_lxattrlist" for a similarly efficient
       call for getting extended attributes.

       This function returns a "struct guestfs_statns_list *", or NULL if there was an error.
       The caller must call "guestfs_free_statns_list" after use.

       (Added in 1.27.53)

   guestfs_luks_add_key
        int
        guestfs_luks_add_key (guestfs_h *g,
                              const char *device,
                              const char *key,
                              const char *newkey,
                              int keyslot);

       This command adds a new key on LUKS device "device".  "key" is any existing key, and is
       used to access the device.  "newkey" is the new key to add.  "keyslot" is the key slot
       that will be replaced.

       Note that if "keyslot" already contains a key, then this command will fail.  You have to
       use "guestfs_luks_kill_slot" first to remove that key.

       This function returns 0 on success or -1 on error.

       This function takes a key or passphrase parameter which could contain sensitive material.
       Read the section "KEYS AND PASSPHRASES" for more information.

       This function depends on the feature "luks".  See also "guestfs_feature_available".

       (Added in 1.5.2)

   guestfs_luks_close
        int
        guestfs_luks_close (guestfs_h *g,
                            const char *device);

       This function is deprecated.  In new code, use the "guestfs_cryptsetup_close" call
       instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This closes a LUKS device that was created earlier by "guestfs_luks_open" or
       "guestfs_luks_open_ro".  The "device" parameter must be the name of the LUKS mapping
       device (ie. /dev/mapper/mapname) and not the name of the underlying block device.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "luks".  See also "guestfs_feature_available".

       (Added in 1.5.1)

   guestfs_luks_format
        int
        guestfs_luks_format (guestfs_h *g,
                             const char *device,
                             const char *key,
                             int keyslot);

       This command erases existing data on "device" and formats the device as a LUKS encrypted
       device.  "key" is the initial key, which is added to key slot "keyslot".  (LUKS supports 8
       key slots, numbered 0-7).

       This function returns 0 on success or -1 on error.

       This function takes a key or passphrase parameter which could contain sensitive material.
       Read the section "KEYS AND PASSPHRASES" for more information.

       This function depends on the feature "luks".  See also "guestfs_feature_available".

       (Added in 1.5.2)

   guestfs_luks_format_cipher
        int
        guestfs_luks_format_cipher (guestfs_h *g,
                                    const char *device,
                                    const char *key,
                                    int keyslot,
                                    const char *cipher);

       This command is the same as "guestfs_luks_format" but it also allows you to set the
       "cipher" used.

       This function returns 0 on success or -1 on error.

       This function takes a key or passphrase parameter which could contain sensitive material.
       Read the section "KEYS AND PASSPHRASES" for more information.

       This function depends on the feature "luks".  See also "guestfs_feature_available".

       (Added in 1.5.2)

   guestfs_luks_kill_slot
        int
        guestfs_luks_kill_slot (guestfs_h *g,
                                const char *device,
                                const char *key,
                                int keyslot);

       This command deletes the key in key slot "keyslot" from the encrypted LUKS device
       "device".  "key" must be one of the other keys.

       This function returns 0 on success or -1 on error.

       This function takes a key or passphrase parameter which could contain sensitive material.
       Read the section "KEYS AND PASSPHRASES" for more information.

       This function depends on the feature "luks".  See also "guestfs_feature_available".

       (Added in 1.5.2)

   guestfs_luks_open
        int
        guestfs_luks_open (guestfs_h *g,
                           const char *device,
                           const char *key,
                           const char *mapname);

       This function is deprecated.  In new code, use the "guestfs_cryptsetup_open" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This command opens a block device which has been encrypted according to the Linux Unified
       Key Setup (LUKS) standard.

       "device" is the encrypted block device or partition.

       The caller must supply one of the keys associated with the LUKS block device, in the "key"
       parameter.

       This creates a new block device called /dev/mapper/mapname.  Reads and writes to this
       block device are decrypted from and encrypted to the underlying "device" respectively.

       If this block device contains LVM volume groups, then calling "guestfs_lvm_scan" with the
       "activate" parameter "true" will make them visible.

       Use "guestfs_list_dm_devices" to list all device mapper devices.

       This function returns 0 on success or -1 on error.

       This function takes a key or passphrase parameter which could contain sensitive material.
       Read the section "KEYS AND PASSPHRASES" for more information.

       This function depends on the feature "luks".  See also "guestfs_feature_available".

       (Added in 1.5.1)

   guestfs_luks_open_ro
        int
        guestfs_luks_open_ro (guestfs_h *g,
                              const char *device,
                              const char *key,
                              const char *mapname);

       This function is deprecated.  In new code, use the "guestfs_cryptsetup_open" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This is the same as "guestfs_luks_open" except that a read-only mapping is created.

       This function returns 0 on success or -1 on error.

       This function takes a key or passphrase parameter which could contain sensitive material.
       Read the section "KEYS AND PASSPHRASES" for more information.

       This function depends on the feature "luks".  See also "guestfs_feature_available".

       (Added in 1.5.1)

   guestfs_luks_uuid
        char *
        guestfs_luks_uuid (guestfs_h *g,
                           const char *device);

       This returns the UUID of the LUKS device "device".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "luks".  See also "guestfs_feature_available".

       (Added in 1.41.9)

   guestfs_lvcreate
        int
        guestfs_lvcreate (guestfs_h *g,
                          const char *logvol,
                          const char *volgroup,
                          int mbytes);

       This creates an LVM logical volume called "logvol" on the volume group "volgroup", with
       "size" megabytes.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 0.8)

   guestfs_lvcreate_free
        int
        guestfs_lvcreate_free (guestfs_h *g,
                               const char *logvol,
                               const char *volgroup,
                               int percent);

       Create an LVM logical volume called /dev/volgroup/logvol, using approximately "percent" %
       of the free space remaining in the volume group.  Most usefully, when "percent" is 100
       this will create the largest possible LV.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.17.18)

   guestfs_lvm_canonical_lv_name
        char *
        guestfs_lvm_canonical_lv_name (guestfs_h *g,
                                       const char *lvname);

       This converts alternative naming schemes for LVs that you might find to the canonical
       name.  For example, /dev/mapper/VG-LV is converted to /dev/VG/LV.

       This command returns an error if the "lvname" parameter does not refer to a logical
       volume.  In this case errno will be set to "EINVAL".

       See also "guestfs_is_lv", "guestfs_canonical_device_name".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.5.24)

   guestfs_lvm_clear_filter
        int
        guestfs_lvm_clear_filter (guestfs_h *g);

       This undoes the effect of "guestfs_lvm_set_filter".  LVM will be able to see every block
       device.

       This command also clears the LVM cache and performs a volume group scan.

       This function returns 0 on success or -1 on error.

       (Added in 1.5.1)

   guestfs_lvm_remove_all
        int
        guestfs_lvm_remove_all (guestfs_h *g);

       This command removes all LVM logical volumes, volume groups and physical volumes.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 0.8)

   guestfs_lvm_scan
        int
        guestfs_lvm_scan (guestfs_h *g,
                          int activate);

       This scans all block devices and rebuilds the list of LVM physical volumes, volume groups
       and logical volumes.

       If the "activate" parameter is "true" then newly found volume groups and logical volumes
       are activated, meaning the LV /dev/VG/LV devices become visible.

       When a libguestfs handle is launched it scans for existing devices, so you do not normally
       need to use this API.  However it is useful when you have added a new device or deleted an
       existing device (such as when the "guestfs_luks_open" API is used).

       This function returns 0 on success or -1 on error.

       (Added in 1.39.8)

   guestfs_lvm_set_filter
        int
        guestfs_lvm_set_filter (guestfs_h *g,
                                char *const *devices);

       This sets the LVM device filter so that LVM will only be able to "see" the block devices
       in the list "devices", and will ignore all other attached block devices.

       Where disk image(s) contain duplicate PVs or VGs, this command is useful to get LVM to
       ignore the duplicates, otherwise LVM can get confused.  Note also there are two types of
       duplication possible: either cloned PVs/VGs which have identical UUIDs; or VGs that are
       not cloned but just happen to have the same name.  In normal operation you cannot create
       this situation, but you can do it outside LVM, eg.  by cloning disk images or by bit
       twiddling inside the LVM metadata.

       This command also clears the LVM cache and performs a volume group scan.

       You can filter whole block devices or individual partitions.

       You cannot use this if any VG is currently in use (eg.  contains a mounted filesystem),
       even if you are not filtering out that VG.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.5.1)

   guestfs_lvremove
        int
        guestfs_lvremove (guestfs_h *g,
                          const char *device);

       Remove an LVM logical volume "device", where "device" is the path to the LV, such as
       /dev/VG/LV.

       You can also remove all LVs in a volume group by specifying the VG name, /dev/VG.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.0.13)

   guestfs_lvrename
        int
        guestfs_lvrename (guestfs_h *g,
                          const char *logvol,
                          const char *newlogvol);

       Rename a logical volume "logvol" with the new name "newlogvol".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.83)

   guestfs_lvresize
        int
        guestfs_lvresize (guestfs_h *g,
                          const char *device,
                          int mbytes);

       This resizes (expands or shrinks) an existing LVM logical volume to "mbytes".  When
       reducing, data in the reduced part is lost.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.0.27)

   guestfs_lvresize_free
        int
        guestfs_lvresize_free (guestfs_h *g,
                               const char *lv,
                               int percent);

       This expands an existing logical volume "lv" so that it fills "pc" % of the remaining free
       space in the volume group.  Commonly you would call this with pc = 100 which expands the
       logical volume as much as possible, using all remaining free space in the volume group.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.3.3)

   guestfs_lvs
        char **
        guestfs_lvs (guestfs_h *g);

       List all the logical volumes detected.  This is the equivalent of the lvs(8) command.

       This returns a list of the logical volume device names (eg. /dev/VolGroup00/LogVol00).

       See also "guestfs_lvs_full", "guestfs_list_filesystems".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 0.4)

   guestfs_lvs_full
        struct guestfs_lvm_lv_list *
        guestfs_lvs_full (guestfs_h *g);

       List all the logical volumes detected.  This is the equivalent of the lvs(8) command.  The
       "full" version includes all fields.

       This function returns a "struct guestfs_lvm_lv_list *", or NULL if there was an error.
       The caller must call "guestfs_free_lvm_lv_list" after use.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 0.4)

   guestfs_lvuuid
        char *
        guestfs_lvuuid (guestfs_h *g,
                        const char *device);

       This command returns the UUID of the LVM LV "device".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.87)

   guestfs_lxattrlist
        struct guestfs_xattr_list *
        guestfs_lxattrlist (guestfs_h *g,
                            const char *path,
                            char *const *names);

       This call allows you to get the extended attributes of multiple files, where all files are
       in the directory "path".  "names" is the list of files from this directory.

       On return you get a flat list of xattr structs which must be interpreted sequentially.
       The first xattr struct always has a zero-length "attrname".  "attrval" in this struct is
       zero-length to indicate there was an error doing "guestfs_lgetxattr" for this file, or is
       a C string which is a decimal number (the number of following attributes for this file,
       which could be "0").  Then after the first xattr struct are the zero or more attributes
       for the first named file.  This repeats for the second and subsequent files.

       This call is intended for programs that want to efficiently list a directory contents
       without making many round-trips.  See also "guestfs_lstatlist" for a similarly efficient
       call for getting standard stats.

       This function returns a "struct guestfs_xattr_list *", or NULL if there was an error.  The
       caller must call "guestfs_free_xattr_list" after use.

       This function depends on the feature "linuxxattrs".  See also "guestfs_feature_available".

       (Added in 1.0.77)

   guestfs_max_disks
        int
        guestfs_max_disks (guestfs_h *g);

       Return the maximum number of disks that may be added to a handle (eg. by
       "guestfs_add_drive_opts" and similar calls).

       This function was added in libguestfs 1.19.7.  In previous versions of libguestfs the
       limit was 25.

       See "MAXIMUM NUMBER OF DISKS" for additional information on this topic.

       On error this function returns -1.

       (Added in 1.19.7)

   guestfs_md_create
        int
        guestfs_md_create (guestfs_h *g,
                           const char *name,
                           char *const *devices,
                           ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_MD_CREATE_MISSINGBITMAP, int64_t missingbitmap,
        GUESTFS_MD_CREATE_NRDEVICES, int nrdevices,
        GUESTFS_MD_CREATE_SPARE, int spare,
        GUESTFS_MD_CREATE_CHUNK, int64_t chunk,
        GUESTFS_MD_CREATE_LEVEL, const char *level,

       Create a Linux md (RAID) device named "name" on the devices in the list "devices".

       The optional parameters are:

       "missingbitmap"
           A bitmap of missing devices.  If a bit is set it means that a missing device is added
           to the array.  The least significant bit corresponds to the first device in the array.

           As examples:

           If "devices = ["/dev/sda"]" and "missingbitmap = 0x1" then the resulting array would
           be "[<missing>, "/dev/sda"]".

           If "devices = ["/dev/sda"]" and "missingbitmap = 0x2" then the resulting array would
           be "["/dev/sda", <missing>]".

           This defaults to 0 (no missing devices).

           The length of "devices" + the number of bits set in "missingbitmap" must equal
           "nrdevices" + "spare".

       "nrdevices"
           The number of active RAID devices.

           If not set, this defaults to the length of "devices" plus the number of bits set in
           "missingbitmap".

       "spare"
           The number of spare devices.

           If not set, this defaults to 0.

       "chunk"
           The chunk size in bytes.

           The "chunk" parameter does not make sense, and should not be specified, when "level"
           is "raid1" (which is the default; see below).

       "level"
           The RAID level, which can be one of: "linear", "raid0", 0, "stripe", "raid1", 1,
           "mirror", "raid4", 4, "raid5", 5, "raid6", 6, "raid10", 10.  Some of these are
           synonymous, and more levels may be added in future.

           If not set, this defaults to "raid1".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "mdadm".  See also "guestfs_feature_available".

       (Added in 1.15.6)

   guestfs_md_create_va
        int
        guestfs_md_create_va (guestfs_h *g,
                              const char *name,
                              char *const *devices,
                              va_list args);

       This is the "va_list variant" of "guestfs_md_create".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_md_create_argv
        int
        guestfs_md_create_argv (guestfs_h *g,
                                const char *name,
                                char *const *devices,
                                const struct guestfs_md_create_argv *optargs);

       This is the "argv variant" of "guestfs_md_create".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_md_detail
        char **
        guestfs_md_detail (guestfs_h *g,
                           const char *md);

       This command exposes the output of "mdadm -DY <md>".  The following fields are usually
       present in the returned hash.  Other fields may also be present.

       "level"
           The raid level of the MD device.

       "devices"
           The number of underlying devices in the MD device.

       "metadata"
           The metadata version used.

       "uuid"
           The UUID of the MD device.

       "name"
           The name of the MD device.

       This function returns a NULL-terminated array of strings, or NULL if there was an error.
       The array of strings will always have length "2n+1", where "n" keys and values alternate,
       followed by the trailing NULL entry.  The caller must free the strings and the array after
       use.

       This function depends on the feature "mdadm".  See also "guestfs_feature_available".

       (Added in 1.15.6)

   guestfs_md_stat
        struct guestfs_mdstat_list *
        guestfs_md_stat (guestfs_h *g,
                         const char *md);

       This call returns a list of the underlying devices which make up the single software RAID
       array device "md".

       To get a list of software RAID devices, call "guestfs_list_md_devices".

       Each structure returned corresponds to one device along with additional status
       information:

       "mdstat_device"
           The name of the underlying device.

       "mdstat_index"
           The index of this device within the array.

       "mdstat_flags"
           Flags associated with this device.  This is a string containing (in no specific order)
           zero or more of the following flags:

           "W" write-mostly

           "F" device is faulty

           "S" device is a RAID spare

           "R" replacement

       This function returns a "struct guestfs_mdstat_list *", or NULL if there was an error.
       The caller must call "guestfs_free_mdstat_list" after use.

       This function depends on the feature "mdadm".  See also "guestfs_feature_available".

       (Added in 1.17.21)

   guestfs_md_stop
        int
        guestfs_md_stop (guestfs_h *g,
                         const char *md);

       This command deactivates the MD array named "md".  The device is stopped, but it is not
       destroyed or zeroed.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "mdadm".  See also "guestfs_feature_available".

       (Added in 1.15.6)

   guestfs_mkdir
        int
        guestfs_mkdir (guestfs_h *g,
                       const char *path);

       Create a directory named "path".

       This function returns 0 on success or -1 on error.

       (Added in 0.8)

   guestfs_mkdir_mode
        int
        guestfs_mkdir_mode (guestfs_h *g,
                            const char *path,
                            int mode);

       This command creates a directory, setting the initial permissions of the directory to
       "mode".

       For common Linux filesystems, the actual mode which is set will be "mode & ~umask &
       01777".  Non-native-Linux filesystems may interpret the mode in other ways.

       See also "guestfs_mkdir", "guestfs_umask"

       This function returns 0 on success or -1 on error.

       (Added in 1.0.77)

   guestfs_mkdir_p
        int
        guestfs_mkdir_p (guestfs_h *g,
                         const char *path);

       Create a directory named "path", creating any parent directories as necessary.  This is
       like the "mkdir -p" shell command.

       This function returns 0 on success or -1 on error.

       (Added in 0.8)

   guestfs_mkdtemp
        char *
        guestfs_mkdtemp (guestfs_h *g,
                         const char *tmpl);

       This command creates a temporary directory.  The "tmpl" parameter should be a full
       pathname for the temporary directory name with the final six characters being "XXXXXX".

       For example: "/tmp/myprogXXXXXX" or "/Temp/myprogXXXXXX", the second one being suitable
       for Windows filesystems.

       The name of the temporary directory that was created is returned.

       The temporary directory is created with mode 0700 and is owned by root.

       The caller is responsible for deleting the temporary directory and its contents after use.

       See also: mkdtemp(3)

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.54)

   guestfs_mke2fs
        int
        guestfs_mke2fs (guestfs_h *g,
                        const char *device,
                        ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_MKE2FS_BLOCKSCOUNT, int64_t blockscount,
        GUESTFS_MKE2FS_BLOCKSIZE, int64_t blocksize,
        GUESTFS_MKE2FS_FRAGSIZE, int64_t fragsize,
        GUESTFS_MKE2FS_BLOCKSPERGROUP, int64_t blockspergroup,
        GUESTFS_MKE2FS_NUMBEROFGROUPS, int64_t numberofgroups,
        GUESTFS_MKE2FS_BYTESPERINODE, int64_t bytesperinode,
        GUESTFS_MKE2FS_INODESIZE, int64_t inodesize,
        GUESTFS_MKE2FS_JOURNALSIZE, int64_t journalsize,
        GUESTFS_MKE2FS_NUMBEROFINODES, int64_t numberofinodes,
        GUESTFS_MKE2FS_STRIDESIZE, int64_t stridesize,
        GUESTFS_MKE2FS_STRIPEWIDTH, int64_t stripewidth,
        GUESTFS_MKE2FS_MAXONLINERESIZE, int64_t maxonlineresize,
        GUESTFS_MKE2FS_RESERVEDBLOCKSPERCENTAGE, int reservedblockspercentage,
        GUESTFS_MKE2FS_MMPUPDATEINTERVAL, int mmpupdateinterval,
        GUESTFS_MKE2FS_JOURNALDEVICE, const char *journaldevice,
        GUESTFS_MKE2FS_LABEL, const char *label,
        GUESTFS_MKE2FS_LASTMOUNTEDDIR, const char *lastmounteddir,
        GUESTFS_MKE2FS_CREATOROS, const char *creatoros,
        GUESTFS_MKE2FS_FSTYPE, const char *fstype,
        GUESTFS_MKE2FS_USAGETYPE, const char *usagetype,
        GUESTFS_MKE2FS_UUID, const char *uuid,
        GUESTFS_MKE2FS_FORCECREATE, int forcecreate,
        GUESTFS_MKE2FS_WRITESBANDGROUPONLY, int writesbandgrouponly,
        GUESTFS_MKE2FS_LAZYITABLEINIT, int lazyitableinit,
        GUESTFS_MKE2FS_LAZYJOURNALINIT, int lazyjournalinit,
        GUESTFS_MKE2FS_TESTFS, int testfs,
        GUESTFS_MKE2FS_DISCARD, int discard,
        GUESTFS_MKE2FS_QUOTATYPE, int quotatype,
        GUESTFS_MKE2FS_EXTENT, int extent,
        GUESTFS_MKE2FS_FILETYPE, int filetype,
        GUESTFS_MKE2FS_FLEXBG, int flexbg,
        GUESTFS_MKE2FS_HASJOURNAL, int hasjournal,
        GUESTFS_MKE2FS_JOURNALDEV, int journaldev,
        GUESTFS_MKE2FS_LARGEFILE, int largefile,
        GUESTFS_MKE2FS_QUOTA, int quota,
        GUESTFS_MKE2FS_RESIZEINODE, int resizeinode,
        GUESTFS_MKE2FS_SPARSESUPER, int sparsesuper,
        GUESTFS_MKE2FS_UNINITBG, int uninitbg,

       "mke2fs" is used to create an ext2, ext3, or ext4 filesystem on "device".

       The optional "blockscount" is the size of the filesystem in blocks.  If omitted it
       defaults to the size of "device".  Note if the filesystem is too small to contain a
       journal, "mke2fs" will silently create an ext2 filesystem instead.

       This function returns 0 on success or -1 on error.

       (Added in 1.19.44)

   guestfs_mke2fs_va
        int
        guestfs_mke2fs_va (guestfs_h *g,
                           const char *device,
                           va_list args);

       This is the "va_list variant" of "guestfs_mke2fs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mke2fs_argv
        int
        guestfs_mke2fs_argv (guestfs_h *g,
                             const char *device,
                             const struct guestfs_mke2fs_argv *optargs);

       This is the "argv variant" of "guestfs_mke2fs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mke2fs_J
        int
        guestfs_mke2fs_J (guestfs_h *g,
                          const char *fstype,
                          int blocksize,
                          const char *device,
                          const char *journal);

       This function is deprecated.  In new code, use the "guestfs_mke2fs" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This creates an ext2/3/4 filesystem on "device" with an external journal on "journal".  It
       is equivalent to the command:

        mke2fs -t fstype -b blocksize -J device=<journal> <device>

       See also "guestfs_mke2journal".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.68)

   guestfs_mke2fs_JL
        int
        guestfs_mke2fs_JL (guestfs_h *g,
                           const char *fstype,
                           int blocksize,
                           const char *device,
                           const char *label);

       This function is deprecated.  In new code, use the "guestfs_mke2fs" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This creates an ext2/3/4 filesystem on "device" with an external journal on the journal
       labeled "label".

       See also "guestfs_mke2journal_L".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.68)

   guestfs_mke2fs_JU
        int
        guestfs_mke2fs_JU (guestfs_h *g,
                           const char *fstype,
                           int blocksize,
                           const char *device,
                           const char *uuid);

       This function is deprecated.  In new code, use the "guestfs_mke2fs" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This creates an ext2/3/4 filesystem on "device" with an external journal on the journal
       with UUID "uuid".

       See also "guestfs_mke2journal_U".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "linuxfsuuid".  See also "guestfs_feature_available".

       (Added in 1.0.68)

   guestfs_mke2journal
        int
        guestfs_mke2journal (guestfs_h *g,
                             int blocksize,
                             const char *device);

       This function is deprecated.  In new code, use the "guestfs_mke2fs" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This creates an ext2 external journal on "device".  It is equivalent to the command:

        mke2fs -O journal_dev -b blocksize device

       This function returns 0 on success or -1 on error.

       (Added in 1.0.68)

   guestfs_mke2journal_L
        int
        guestfs_mke2journal_L (guestfs_h *g,
                               int blocksize,
                               const char *label,
                               const char *device);

       This function is deprecated.  In new code, use the "guestfs_mke2fs" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This creates an ext2 external journal on "device" with label "label".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.68)

   guestfs_mke2journal_U
        int
        guestfs_mke2journal_U (guestfs_h *g,
                               int blocksize,
                               const char *uuid,
                               const char *device);

       This function is deprecated.  In new code, use the "guestfs_mke2fs" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This creates an ext2 external journal on "device" with UUID "uuid".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "linuxfsuuid".  See also "guestfs_feature_available".

       (Added in 1.0.68)

   guestfs_mkfifo
        int
        guestfs_mkfifo (guestfs_h *g,
                        int mode,
                        const char *path);

       This call creates a FIFO (named pipe) called "path" with mode "mode".  It is just a
       convenient wrapper around "guestfs_mknod".

       Unlike with "guestfs_mknod", "mode" must contain only permissions bits.

       The mode actually set is affected by the umask.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "mknod".  See also "guestfs_feature_available".

       (Added in 1.0.55)

   guestfs_mkfs
        int
        guestfs_mkfs (guestfs_h *g,
                      const char *fstype,
                      const char *device);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_mkfs_opts" with no optional arguments.

       (Added in 0.8)

   guestfs_mkfs_opts
        int
        guestfs_mkfs_opts (guestfs_h *g,
                           const char *fstype,
                           const char *device,
                           ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_MKFS_OPTS_BLOCKSIZE, int blocksize,
        GUESTFS_MKFS_OPTS_FEATURES, const char *features,
        GUESTFS_MKFS_OPTS_INODE, int inode,
        GUESTFS_MKFS_OPTS_SECTORSIZE, int sectorsize,
        GUESTFS_MKFS_OPTS_LABEL, const char *label,

       This function creates a filesystem on "device".  The filesystem type is "fstype", for
       example "ext3".

       The optional arguments are:

       "blocksize"
           The filesystem block size.  Supported block sizes depend on the filesystem type, but
           typically they are 1024, 2048 or 4096 for Linux ext2/3 filesystems.

           For VFAT and NTFS the "blocksize" parameter is treated as the requested cluster size.

           For UFS block sizes, please see mkfs.ufs(8).

       "features"
           This passes the -O parameter to the external mkfs program.

           For certain filesystem types, this allows extra filesystem features to be selected.
           See mke2fs(8) and mkfs.ufs(8) for more details.

           You cannot use this optional parameter with the "gfs" or "gfs2" filesystem type.

       "inode"
           This passes the -I parameter to the external mke2fs(8) program which sets the inode
           size (only for ext2/3/4 filesystems at present).

       "sectorsize"
           This passes the -S parameter to external mkfs.ufs(8) program, which sets sector size
           for ufs filesystem.

       This function returns 0 on success or -1 on error.

       (Added in 0.8)

   guestfs_mkfs_opts_va
        int
        guestfs_mkfs_opts_va (guestfs_h *g,
                              const char *fstype,
                              const char *device,
                              va_list args);

       This is the "va_list variant" of "guestfs_mkfs_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mkfs_opts_argv
        int
        guestfs_mkfs_opts_argv (guestfs_h *g,
                                const char *fstype,
                                const char *device,
                                const struct guestfs_mkfs_opts_argv *optargs);

       This is the "argv variant" of "guestfs_mkfs_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mkfs_b
        int
        guestfs_mkfs_b (guestfs_h *g,
                        const char *fstype,
                        int blocksize,
                        const char *device);

       This function is deprecated.  In new code, use the "guestfs_mkfs" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This call is similar to "guestfs_mkfs", but it allows you to control the block size of the
       resulting filesystem.  Supported block sizes depend on the filesystem type, but typically
       they are 1024, 2048 or 4096 only.

       For VFAT and NTFS the "blocksize" parameter is treated as the requested cluster size.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.68)

   guestfs_mkfs_btrfs
        int
        guestfs_mkfs_btrfs (guestfs_h *g,
                            char *const *devices,
                            ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_MKFS_BTRFS_ALLOCSTART, int64_t allocstart,
        GUESTFS_MKFS_BTRFS_BYTECOUNT, int64_t bytecount,
        GUESTFS_MKFS_BTRFS_DATATYPE, const char *datatype,
        GUESTFS_MKFS_BTRFS_LEAFSIZE, int leafsize,
        GUESTFS_MKFS_BTRFS_LABEL, const char *label,
        GUESTFS_MKFS_BTRFS_METADATA, const char *metadata,
        GUESTFS_MKFS_BTRFS_NODESIZE, int nodesize,
        GUESTFS_MKFS_BTRFS_SECTORSIZE, int sectorsize,

       Create a btrfs filesystem, allowing all configurables to be set.  For more information on
       the optional arguments, see mkfs.btrfs(8).

       Since btrfs filesystems can span multiple devices, this takes a non-empty list of devices.

       To create general filesystems, use "guestfs_mkfs".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "btrfs".  See also "guestfs_feature_available".

       (Added in 1.17.25)

   guestfs_mkfs_btrfs_va
        int
        guestfs_mkfs_btrfs_va (guestfs_h *g,
                               char *const *devices,
                               va_list args);

       This is the "va_list variant" of "guestfs_mkfs_btrfs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mkfs_btrfs_argv
        int
        guestfs_mkfs_btrfs_argv (guestfs_h *g,
                                 char *const *devices,
                                 const struct guestfs_mkfs_btrfs_argv *optargs);

       This is the "argv variant" of "guestfs_mkfs_btrfs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mklost_and_found
        int
        guestfs_mklost_and_found (guestfs_h *g,
                                  const char *mountpoint);

       Make the "lost+found" directory, normally in the root directory of an ext2/3/4 filesystem.
       "mountpoint" is the directory under which we try to create the "lost+found" directory.

       This function returns 0 on success or -1 on error.

       (Added in 1.19.56)

   guestfs_mkmountpoint
        int
        guestfs_mkmountpoint (guestfs_h *g,
                              const char *exemptpath);

       "guestfs_mkmountpoint" and "guestfs_rmmountpoint" are specialized calls that can be used
       to create extra mountpoints before mounting the first filesystem.

       These calls are only necessary in some very limited circumstances, mainly the case where
       you want to mount a mix of unrelated and/or read-only filesystems together.

       For example, live CDs often contain a "Russian doll" nest of filesystems, an ISO outer
       layer, with a squashfs image inside, with an ext2/3 image inside that.  You can unpack
       this as follows in guestfish:

        add-ro Fedora-11-i686-Live.iso
        run
        mkmountpoint /cd
        mkmountpoint /sqsh
        mkmountpoint /ext3fs
        mount /dev/sda /cd
        mount-loop /cd/LiveOS/squashfs.img /sqsh
        mount-loop /sqsh/LiveOS/ext3fs.img /ext3fs

       The inner filesystem is now unpacked under the /ext3fs mountpoint.

       "guestfs_mkmountpoint" is not compatible with "guestfs_umount_all".  You may get
       unexpected errors if you try to mix these calls.  It is safest to manually unmount
       filesystems and remove mountpoints after use.

       "guestfs_umount_all" unmounts filesystems by sorting the paths longest first, so for this
       to work for manual mountpoints, you must ensure that the innermost mountpoints have the
       longest pathnames, as in the example code above.

       For more details see https://bugzilla.redhat.com/show_bug.cgi?id=599503

       Autosync [see "guestfs_set_autosync", this is set by default on handles] can cause
       "guestfs_umount_all" to be called when the handle is closed which can also trigger these
       issues.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.62)

   guestfs_mknod
        int
        guestfs_mknod (guestfs_h *g,
                       int mode,
                       int devmajor,
                       int devminor,
                       const char *path);

       This call creates block or character special devices, or named pipes (FIFOs).

       The "mode" parameter should be the mode, using the standard constants.  "devmajor" and
       "devminor" are the device major and minor numbers, only used when creating block and
       character special devices.

       Note that, just like mknod(2), the mode must be bitwise OR'd with S_IFBLK, S_IFCHR,
       S_IFIFO or S_IFSOCK (otherwise this call just creates a regular file).  These constants
       are available in the standard Linux header files, or you can use "guestfs_mknod_b",
       "guestfs_mknod_c" or "guestfs_mkfifo" which are wrappers around this command which bitwise
       OR in the appropriate constant for you.

       The mode actually set is affected by the umask.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "mknod".  See also "guestfs_feature_available".

       (Added in 1.0.55)

   guestfs_mknod_b
        int
        guestfs_mknod_b (guestfs_h *g,
                         int mode,
                         int devmajor,
                         int devminor,
                         const char *path);

       This call creates a block device node called "path" with mode "mode" and device
       major/minor "devmajor" and "devminor".  It is just a convenient wrapper around
       "guestfs_mknod".

       Unlike with "guestfs_mknod", "mode" must contain only permissions bits.

       The mode actually set is affected by the umask.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "mknod".  See also "guestfs_feature_available".

       (Added in 1.0.55)

   guestfs_mknod_c
        int
        guestfs_mknod_c (guestfs_h *g,
                         int mode,
                         int devmajor,
                         int devminor,
                         const char *path);

       This call creates a char device node called "path" with mode "mode" and device major/minor
       "devmajor" and "devminor".  It is just a convenient wrapper around "guestfs_mknod".

       Unlike with "guestfs_mknod", "mode" must contain only permissions bits.

       The mode actually set is affected by the umask.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "mknod".  See also "guestfs_feature_available".

       (Added in 1.0.55)

   guestfs_mksquashfs
        int
        guestfs_mksquashfs (guestfs_h *g,
                            const char *path,
                            const char *filename,
                            ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_MKSQUASHFS_COMPRESS, const char *compress,
        GUESTFS_MKSQUASHFS_EXCLUDES, char *const *excludes,

       Create a squashfs filesystem for the specified "path".

       The optional "compress" flag controls compression.  If not given, then the output
       compressed using "gzip".  Otherwise one of the following strings may be given to select
       the compression type of the squashfs: "gzip", "lzma", "lzo", "lz4", "xz".

       The other optional arguments are:

       "excludes"
           A list of wildcards.  Files are excluded if they match any of the wildcards.

       Please note that this API may fail when used to compress directories with large files,
       such as the resulting squashfs will be over 3GB big.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "squashfs".  See also "guestfs_feature_available".

       (Added in 1.35.25)

   guestfs_mksquashfs_va
        int
        guestfs_mksquashfs_va (guestfs_h *g,
                               const char *path,
                               const char *filename,
                               va_list args);

       This is the "va_list variant" of "guestfs_mksquashfs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mksquashfs_argv
        int
        guestfs_mksquashfs_argv (guestfs_h *g,
                                 const char *path,
                                 const char *filename,
                                 const struct guestfs_mksquashfs_argv *optargs);

       This is the "argv variant" of "guestfs_mksquashfs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mkswap
        int
        guestfs_mkswap (guestfs_h *g,
                        const char *device);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_mkswap_opts" with no optional arguments.

       (Added in 1.0.55)

   guestfs_mkswap_opts
        int
        guestfs_mkswap_opts (guestfs_h *g,
                             const char *device,
                             ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_MKSWAP_OPTS_LABEL, const char *label,
        GUESTFS_MKSWAP_OPTS_UUID, const char *uuid,

       Create a Linux swap partition on "device".

       The option arguments "label" and "uuid" allow you to set the label and/or UUID of the new
       swap partition.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.55)

   guestfs_mkswap_opts_va
        int
        guestfs_mkswap_opts_va (guestfs_h *g,
                                const char *device,
                                va_list args);

       This is the "va_list variant" of "guestfs_mkswap_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mkswap_opts_argv
        int
        guestfs_mkswap_opts_argv (guestfs_h *g,
                                  const char *device,
                                  const struct guestfs_mkswap_opts_argv *optargs);

       This is the "argv variant" of "guestfs_mkswap_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mkswap_L
        int
        guestfs_mkswap_L (guestfs_h *g,
                          const char *label,
                          const char *device);

       This function is deprecated.  In new code, use the "guestfs_mkswap" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       Create a swap partition on "device" with label "label".

       Note that you cannot attach a swap label to a block device (eg. /dev/sda), just to a
       partition.  This appears to be a limitation of the kernel or swap tools.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.55)

   guestfs_mkswap_U
        int
        guestfs_mkswap_U (guestfs_h *g,
                          const char *uuid,
                          const char *device);

       This function is deprecated.  In new code, use the "guestfs_mkswap" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       Create a swap partition on "device" with UUID "uuid".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "linuxfsuuid".  See also "guestfs_feature_available".

       (Added in 1.0.55)

   guestfs_mkswap_file
        int
        guestfs_mkswap_file (guestfs_h *g,
                             const char *path);

       Create a swap file.

       This command just writes a swap file signature to an existing file.  To create the file
       itself, use something like "guestfs_fallocate".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_mktemp
        char *
        guestfs_mktemp (guestfs_h *g,
                        const char *tmpl,
                        ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_MKTEMP_SUFFIX, const char *suffix,

       This command creates a temporary file.  The "tmpl" parameter should be a full pathname for
       the temporary directory name with the final six characters being "XXXXXX".

       For example: "/tmp/myprogXXXXXX" or "/Temp/myprogXXXXXX", the second one being suitable
       for Windows filesystems.

       The name of the temporary file that was created is returned.

       The temporary file is created with mode 0600 and is owned by root.

       The caller is responsible for deleting the temporary file after use.

       If the optional "suffix" parameter is given, then the suffix (eg. ".txt") is appended to
       the temporary name.

       See also: "guestfs_mkdtemp".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.19.53)

   guestfs_mktemp_va
        char *
        guestfs_mktemp_va (guestfs_h *g,
                           const char *tmpl,
                           va_list args);

       This is the "va_list variant" of "guestfs_mktemp".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mktemp_argv
        char *
        guestfs_mktemp_argv (guestfs_h *g,
                             const char *tmpl,
                             const struct guestfs_mktemp_argv *optargs);

       This is the "argv variant" of "guestfs_mktemp".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_modprobe
        int
        guestfs_modprobe (guestfs_h *g,
                          const char *modulename);

       This loads a kernel module in the appliance.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "linuxmodules".  See also
       "guestfs_feature_available".

       (Added in 1.0.68)

   guestfs_mount
        int
        guestfs_mount (guestfs_h *g,
                       const char *mountable,
                       const char *mountpoint);

       Mount a guest disk at a position in the filesystem.  Block devices are named /dev/sda,
       /dev/sdb and so on, as they were added to the guest.  If those block devices contain
       partitions, they will have the usual names (eg. /dev/sda1).  Also LVM /dev/VG/LV-style
       names can be used, or ‘mountable’ strings returned by "guestfs_list_filesystems" or
       "guestfs_inspect_get_mountpoints".

       The rules are the same as for mount(2):  A filesystem must first be mounted on / before
       others can be mounted.  Other filesystems can only be mounted on directories which already
       exist.

       The mounted filesystem is writable, if we have sufficient permissions on the underlying
       device.

       Before libguestfs 1.13.16, this call implicitly added the options "sync" and "noatime".
       The "sync" option greatly slowed writes and caused many problems for users.  If your
       program might need to work with older versions of libguestfs, use "guestfs_mount_options"
       instead (using an empty string for the first parameter if you don't want any options).

       This function returns 0 on success or -1 on error.

       (Added in 0.3)

   guestfs_mount_9p
        int
        guestfs_mount_9p (guestfs_h *g,
                          const char *mounttag,
                          const char *mountpoint,
                          ...);

       This function is deprecated.  There is no replacement.  Consult the API documentation in
       guestfs(3) for further information.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_MOUNT_9P_OPTIONS, const char *options,

       This call does nothing and returns an error.

       This function returns 0 on success or -1 on error.

       (Added in 1.11.12)

   guestfs_mount_9p_va
        int
        guestfs_mount_9p_va (guestfs_h *g,
                             const char *mounttag,
                             const char *mountpoint,
                             va_list args);

       This is the "va_list variant" of "guestfs_mount_9p".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mount_9p_argv
        int
        guestfs_mount_9p_argv (guestfs_h *g,
                               const char *mounttag,
                               const char *mountpoint,
                               const struct guestfs_mount_9p_argv *optargs);

       This is the "argv variant" of "guestfs_mount_9p".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mount_local
        int
        guestfs_mount_local (guestfs_h *g,
                             const char *localmountpoint,
                             ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_MOUNT_LOCAL_READONLY, int readonly,
        GUESTFS_MOUNT_LOCAL_OPTIONS, const char *options,
        GUESTFS_MOUNT_LOCAL_CACHETIMEOUT, int cachetimeout,
        GUESTFS_MOUNT_LOCAL_DEBUGCALLS, int debugcalls,

       This call exports the libguestfs-accessible filesystem to a local mountpoint (directory)
       called "localmountpoint".  Ordinary reads and writes to files and directories under
       "localmountpoint" are redirected through libguestfs.

       If the optional "readonly" flag is set to true, then writes to the filesystem return error
       "EROFS".

       "options" is a comma-separated list of mount options.  See guestmount(1) for some useful
       options.

       "cachetimeout" sets the timeout (in seconds) for cached directory entries.  The default is
       60 seconds.  See guestmount(1) for further information.

       If "debugcalls" is set to true, then additional debugging information is generated for
       every FUSE call.

       When "guestfs_mount_local" returns, the filesystem is ready, but is not processing
       requests (access to it will block).  You have to call "guestfs_mount_local_run" to run the
       main loop.

       See "MOUNT LOCAL" for full documentation.

       This function returns 0 on success or -1 on error.

       (Added in 1.17.22)

   guestfs_mount_local_va
        int
        guestfs_mount_local_va (guestfs_h *g,
                                const char *localmountpoint,
                                va_list args);

       This is the "va_list variant" of "guestfs_mount_local".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mount_local_argv
        int
        guestfs_mount_local_argv (guestfs_h *g,
                                  const char *localmountpoint,
                                  const struct guestfs_mount_local_argv *optargs);

       This is the "argv variant" of "guestfs_mount_local".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_mount_local_run
        int
        guestfs_mount_local_run (guestfs_h *g);

       Run the main loop which translates kernel calls to libguestfs calls.

       This should only be called after "guestfs_mount_local" returns successfully.  The call
       will not return until the filesystem is unmounted.

       Note you must not make concurrent libguestfs calls on the same handle from another thread.

       You may call this from a different thread than the one which called "guestfs_mount_local",
       subject to the usual rules for threads and libguestfs (see "MULTIPLE HANDLES AND MULTIPLE
       THREADS").

       See "MOUNT LOCAL" for full documentation.

       This function returns 0 on success or -1 on error.

       (Added in 1.17.22)

   guestfs_mount_loop
        int
        guestfs_mount_loop (guestfs_h *g,
                            const char *file,
                            const char *mountpoint);

       This command lets you mount file (a filesystem image in a file) on a mount point.  It is
       entirely equivalent to the command "mount -o loop file mountpoint".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.54)

   guestfs_mount_options
        int
        guestfs_mount_options (guestfs_h *g,
                               const char *options,
                               const char *mountable,
                               const char *mountpoint);

       This is the same as the "guestfs_mount" command, but it allows you to set the mount
       options as for the mount(8) -o flag.

       If the "options" parameter is an empty string, then no options are passed (all options
       default to whatever the filesystem uses).

       This function returns 0 on success or -1 on error.

       (Added in 1.0.10)

   guestfs_mount_ro
        int
        guestfs_mount_ro (guestfs_h *g,
                          const char *mountable,
                          const char *mountpoint);

       This is the same as the "guestfs_mount" command, but it mounts the filesystem with the
       read-only (-o ro) flag.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.10)

   guestfs_mount_vfs
        int
        guestfs_mount_vfs (guestfs_h *g,
                           const char *options,
                           const char *vfstype,
                           const char *mountable,
                           const char *mountpoint);

       This is the same as the "guestfs_mount" command, but it allows you to set both the mount
       options and the vfstype as for the mount(8) -o and -t flags.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.10)

   guestfs_mountable_device
        char *
        guestfs_mountable_device (guestfs_h *g,
                                  const char *mountable);

       Returns the device name of a mountable. In quite a lot of cases, the mountable is the
       device name.

       However this doesn't apply for btrfs subvolumes, where the mountable is a combination of
       both the device name and the subvolume path (see also "guestfs_mountable_subvolume" to
       extract the subvolume path of the mountable if any).

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.33.15)

   guestfs_mountable_subvolume
        char *
        guestfs_mountable_subvolume (guestfs_h *g,
                                     const char *mountable);

       Returns the subvolume path of a mountable. Btrfs subvolumes mountables are a combination
       of both the device name and the subvolume path (see also "guestfs_mountable_device" to
       extract the device of the mountable).

       If the mountable does not represent a btrfs subvolume, then this function fails and the
       "errno" is set to "EINVAL".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.33.15)

   guestfs_mountpoints
        char **
        guestfs_mountpoints (guestfs_h *g);

       This call is similar to "guestfs_mounts".  That call returns a list of devices.  This one
       returns a hash table (map) of device name to directory where the device is mounted.

       This function returns a NULL-terminated array of strings, or NULL if there was an error.
       The array of strings will always have length "2n+1", where "n" keys and values alternate,
       followed by the trailing NULL entry.  The caller must free the strings and the array after
       use.

       (Added in 1.0.62)

   guestfs_mounts
        char **
        guestfs_mounts (guestfs_h *g);

       This returns the list of currently mounted filesystems.  It returns the list of devices
       (eg. /dev/sda1, /dev/VG/LV).

       Some internal mounts are not shown.

       See also: "guestfs_mountpoints"

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 0.8)

   guestfs_mv
        int
        guestfs_mv (guestfs_h *g,
                    const char *src,
                    const char *dest);

       This moves a file from "src" to "dest" where "dest" is either a destination filename or
       destination directory.

       See also: "guestfs_rename".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.18)

   guestfs_nr_devices
        int
        guestfs_nr_devices (guestfs_h *g);

       This returns the number of whole block devices that were added.  This is the same as the
       number of devices that would be returned if you called "guestfs_list_devices".

       To find out the maximum number of devices that could be added, call "guestfs_max_disks".

       On error this function returns -1.

       (Added in 1.19.15)

   guestfs_ntfs_3g_probe
        int
        guestfs_ntfs_3g_probe (guestfs_h *g,
                               int rw,
                               const char *device);

       This command runs the ntfs-3g.probe(8) command which probes an NTFS "device" for
       mountability.  (Not all NTFS volumes can be mounted read-write, and some cannot be mounted
       at all).

       "rw" is a boolean flag.  Set it to true if you want to test if the volume can be mounted
       read-write.  Set it to false if you want to test if the volume can be mounted read-only.

       The return value is an integer which 0 if the operation would succeed, or some non-zero
       value documented in the ntfs-3g.probe(8) manual page.

       On error this function returns -1.

       This function depends on the feature "ntfs3g".  See also "guestfs_feature_available".

       (Added in 1.0.43)

   guestfs_ntfscat_i
        int
        guestfs_ntfscat_i (guestfs_h *g,
                           const char *device,
                           int64_t inode,
                           const char *filename);

       Download a file given its inode from a NTFS filesystem and save it as filename on the
       local machine.

       This allows to download some otherwise inaccessible files such as the ones within the
       $Extend folder.

       The filesystem from which to extract the file must be unmounted, otherwise the call will
       fail.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.33.14)

   guestfs_ntfsclone_in
        int
        guestfs_ntfsclone_in (guestfs_h *g,
                              const char *backupfile,
                              const char *device);

       Restore the "backupfile" (from a previous call to "guestfs_ntfsclone_out") to "device",
       overwriting any existing contents of this device.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "ntfs3g".  See also "guestfs_feature_available".

       (Added in 1.17.9)

   guestfs_ntfsclone_out
        int
        guestfs_ntfsclone_out (guestfs_h *g,
                               const char *device,
                               const char *backupfile,
                               ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_NTFSCLONE_OUT_METADATAONLY, int metadataonly,
        GUESTFS_NTFSCLONE_OUT_RESCUE, int rescue,
        GUESTFS_NTFSCLONE_OUT_IGNOREFSCHECK, int ignorefscheck,
        GUESTFS_NTFSCLONE_OUT_PRESERVETIMESTAMPS, int preservetimestamps,
        GUESTFS_NTFSCLONE_OUT_FORCE, int force,

       Stream the NTFS filesystem "device" to the local file "backupfile".  The format used for
       the backup file is a special format used by the ntfsclone(8) tool.

       If the optional "metadataonly" flag is true, then only the metadata is saved, losing all
       the user data (this is useful for diagnosing some filesystem problems).

       The optional "rescue", "ignorefscheck", "preservetimestamps" and "force" flags have
       precise meanings detailed in the ntfsclone(8) man page.

       Use "guestfs_ntfsclone_in" to restore the file back to a libguestfs device.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "ntfs3g".  See also "guestfs_feature_available".

       (Added in 1.17.9)

   guestfs_ntfsclone_out_va
        int
        guestfs_ntfsclone_out_va (guestfs_h *g,
                                  const char *device,
                                  const char *backupfile,
                                  va_list args);

       This is the "va_list variant" of "guestfs_ntfsclone_out".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_ntfsclone_out_argv
        int
        guestfs_ntfsclone_out_argv (guestfs_h *g,
                                    const char *device,
                                    const char *backupfile,
                                    const struct guestfs_ntfsclone_out_argv *optargs);

       This is the "argv variant" of "guestfs_ntfsclone_out".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_ntfsfix
        int
        guestfs_ntfsfix (guestfs_h *g,
                         const char *device,
                         ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_NTFSFIX_CLEARBADSECTORS, int clearbadsectors,

       This command repairs some fundamental NTFS inconsistencies, resets the NTFS journal file,
       and schedules an NTFS consistency check for the first boot into Windows.

       This is not an equivalent of Windows "chkdsk".  It does not scan the filesystem for
       inconsistencies.

       The optional "clearbadsectors" flag clears the list of bad sectors.  This is useful after
       cloning a disk with bad sectors to a new disk.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "ntfs3g".  See also "guestfs_feature_available".

       (Added in 1.17.9)

   guestfs_ntfsfix_va
        int
        guestfs_ntfsfix_va (guestfs_h *g,
                            const char *device,
                            va_list args);

       This is the "va_list variant" of "guestfs_ntfsfix".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_ntfsfix_argv
        int
        guestfs_ntfsfix_argv (guestfs_h *g,
                              const char *device,
                              const struct guestfs_ntfsfix_argv *optargs);

       This is the "argv variant" of "guestfs_ntfsfix".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_ntfsresize
        int
        guestfs_ntfsresize (guestfs_h *g,
                            const char *device);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_ntfsresize_opts" with no optional arguments.

       (Added in 1.3.2)

   guestfs_ntfsresize_opts
        int
        guestfs_ntfsresize_opts (guestfs_h *g,
                                 const char *device,
                                 ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_NTFSRESIZE_OPTS_SIZE, int64_t size,
        GUESTFS_NTFSRESIZE_OPTS_FORCE, int force,

       This command resizes an NTFS filesystem, expanding or shrinking it to the size of the
       underlying device.

       The optional parameters are:

       "size"
           The new size (in bytes) of the filesystem.  If omitted, the filesystem is resized to
           fit the container (eg. partition).

       "force"
           If this option is true, then force the resize of the filesystem even if the filesystem
           is marked as requiring a consistency check.

           After the resize operation, the filesystem is always marked as requiring a consistency
           check (for safety).  You have to boot into Windows to perform this check and clear
           this condition.  If you don't set the "force" option then it is not possible to call
           "guestfs_ntfsresize" multiple times on a single filesystem without booting into
           Windows between each resize.

       See also ntfsresize(8).

       This function returns 0 on success or -1 on error.

       This function depends on the feature "ntfsprogs".  See also "guestfs_feature_available".

       (Added in 1.3.2)

   guestfs_ntfsresize_opts_va
        int
        guestfs_ntfsresize_opts_va (guestfs_h *g,
                                    const char *device,
                                    va_list args);

       This is the "va_list variant" of "guestfs_ntfsresize_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_ntfsresize_opts_argv
        int
        guestfs_ntfsresize_opts_argv (guestfs_h *g,
                                      const char *device,
                                      const struct guestfs_ntfsresize_opts_argv *optargs);

       This is the "argv variant" of "guestfs_ntfsresize_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_ntfsresize_size
        int
        guestfs_ntfsresize_size (guestfs_h *g,
                                 const char *device,
                                 int64_t size);

       This function is deprecated.  In new code, use the "guestfs_ntfsresize" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This command is the same as "guestfs_ntfsresize" except that it allows you to specify the
       new size (in bytes) explicitly.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "ntfsprogs".  See also "guestfs_feature_available".

       (Added in 1.3.14)

   guestfs_parse_environment
        int
        guestfs_parse_environment (guestfs_h *g);

       Parse the program’s environment and set flags in the handle accordingly.  For example if
       "LIBGUESTFS_DEBUG=1" then the ‘verbose’ flag is set in the handle.

       Most programs do not need to call this.  It is done implicitly when you call
       "guestfs_create".

       See "ENVIRONMENT VARIABLES" for a list of environment variables that can affect libguestfs
       handles.  See also "guestfs_create_flags", and "guestfs_parse_environment_list".

       This function returns 0 on success or -1 on error.

       (Added in 1.19.53)

   guestfs_parse_environment_list
        int
        guestfs_parse_environment_list (guestfs_h *g,
                                        char *const *environment);

       Parse the list of strings in the argument "environment" and set flags in the handle
       accordingly.  For example if "LIBGUESTFS_DEBUG=1" is a string in the list, then the
       ‘verbose’ flag is set in the handle.

       This is the same as "guestfs_parse_environment" except that it parses an explicit list of
       strings instead of the program's environment.

       This function returns 0 on success or -1 on error.

       (Added in 1.19.53)

   guestfs_part_add
        int
        guestfs_part_add (guestfs_h *g,
                          const char *device,
                          const char *prlogex,
                          int64_t startsect,
                          int64_t endsect);

       This command adds a partition to "device".  If there is no partition table on the device,
       call "guestfs_part_init" first.

       The "prlogex" parameter is the type of partition.  Normally you should pass "p" or
       "primary" here, but MBR partition tables also support "l" (or "logical") and "e" (or
       "extended") partition types.

       "startsect" and "endsect" are the start and end of the partition in sectors.  "endsect"
       may be negative, which means it counts backwards from the end of the disk ("-1" is the
       last sector).

       Creating a partition which covers the whole disk is not so easy.  Use "guestfs_part_disk"
       to do that.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.78)

   guestfs_part_del
        int
        guestfs_part_del (guestfs_h *g,
                          const char *device,
                          int partnum);

       This command deletes the partition numbered "partnum" on "device".

       Note that in the case of MBR partitioning, deleting an extended partition also deletes any
       logical partitions it contains.

       This function returns 0 on success or -1 on error.

       (Added in 1.3.2)

   guestfs_part_disk
        int
        guestfs_part_disk (guestfs_h *g,
                           const char *device,
                           const char *parttype);

       This command is simply a combination of "guestfs_part_init" followed by "guestfs_part_add"
       to create a single primary partition covering the whole disk.

       "parttype" is the partition table type, usually "mbr" or "gpt", but other possible values
       are described in "guestfs_part_init".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.78)

   guestfs_part_expand_gpt
        int
        guestfs_part_expand_gpt (guestfs_h *g,
                                 const char *device);

       Move backup GPT data structures to the end of the disk.  This is useful in case of in-
       place image expand since disk space after backup GPT header is not usable.  This is
       equivalent to "sgdisk -e".

       See also sgdisk(8).

       This function returns 0 on success or -1 on error.

       This function depends on the feature "gdisk".  See also "guestfs_feature_available".

       (Added in 1.33.2)

   guestfs_part_get_bootable
        int
        guestfs_part_get_bootable (guestfs_h *g,
                                   const char *device,
                                   int partnum);

       This command returns true if the partition "partnum" on "device" has the bootable flag
       set.

       See also "guestfs_part_set_bootable".

       This function returns a C truth value on success or -1 on error.

       (Added in 1.3.2)

   guestfs_part_get_disk_guid
        char *
        guestfs_part_get_disk_guid (guestfs_h *g,
                                    const char *device);

       Return the disk identifier (GUID) of a GPT-partitioned "device".  Behaviour is undefined
       for other partition types.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "gdisk".  See also "guestfs_feature_available".

       (Added in 1.33.2)

   guestfs_part_get_gpt_attributes
        int64_t
        guestfs_part_get_gpt_attributes (guestfs_h *g,
                                         const char *device,
                                         int partnum);

       Return the attribute flags of numbered GPT partition "partnum".  An error is returned for
       MBR partitions.

       On error this function returns -1.

       This function depends on the feature "gdisk".  See also "guestfs_feature_available".

       (Added in 1.21.1)

   guestfs_part_get_gpt_guid
        char *
        guestfs_part_get_gpt_guid (guestfs_h *g,
                                   const char *device,
                                   int partnum);

       Return the GUID of numbered GPT partition "partnum".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "gdisk".  See also "guestfs_feature_available".

       (Added in 1.29.25)

   guestfs_part_get_gpt_type
        char *
        guestfs_part_get_gpt_type (guestfs_h *g,
                                   const char *device,
                                   int partnum);

       Return the type GUID of numbered GPT partition "partnum". For MBR partitions, return an
       appropriate GUID corresponding to the MBR type. Behaviour is undefined for other partition
       types.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       This function depends on the feature "gdisk".  See also "guestfs_feature_available".

       (Added in 1.21.1)

   guestfs_part_get_mbr_id
        int
        guestfs_part_get_mbr_id (guestfs_h *g,
                                 const char *device,
                                 int partnum);

       Returns the MBR type byte (also known as the ID byte) from the numbered partition
       "partnum".

       Note that only MBR (old DOS-style) partitions have type bytes.  You will get undefined
       results for other partition table types (see "guestfs_part_get_parttype").

       On error this function returns -1.

       (Added in 1.3.2)

   guestfs_part_get_mbr_part_type
        char *
        guestfs_part_get_mbr_part_type (guestfs_h *g,
                                        const char *device,
                                        int partnum);

       This returns the partition type of an MBR partition numbered "partnum" on device "device".

       It returns "primary", "logical", or "extended".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.29.32)

   guestfs_part_get_name
        char *
        guestfs_part_get_name (guestfs_h *g,
                               const char *device,
                               int partnum);

       This gets the partition name on partition numbered "partnum" on device "device".  Note
       that partitions are numbered from 1.

       The partition name can only be read on certain types of partition table.  This works on
       "gpt" but not on "mbr" partitions.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.25.33)

   guestfs_part_get_parttype
        char *
        guestfs_part_get_parttype (guestfs_h *g,
                                   const char *device);

       This command examines the partition table on "device" and returns the partition table type
       (format) being used.

       Common return values include: "msdos" (a DOS/Windows style MBR partition table), "gpt" (a
       GPT/EFI-style partition table).  Other values are possible, although unusual.  See
       "guestfs_part_init" for a full list.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.78)

   guestfs_part_init
        int
        guestfs_part_init (guestfs_h *g,
                           const char *device,
                           const char *parttype);

       This creates an empty partition table on "device" of one of the partition types listed
       below.  Usually "parttype" should be either "msdos" or "gpt" (for large disks).

       Initially there are no partitions.  Following this, you should call "guestfs_part_add" for
       each partition required.

       Possible values for "parttype" are:

       "efi"
       "gpt"
           Intel EFI / GPT partition table.

           This is recommended for >= 2 TB partitions that will be accessed from Linux and Intel-
           based Mac OS X.  It also has limited backwards compatibility with the "mbr" format.

       "mbr"
       "msdos"
           The standard PC "Master Boot Record" (MBR) format used by MS-DOS and Windows.  This
           partition type will only work for device sizes up to 2 TB.  For large disks we
           recommend using "gpt".

       Other partition table types that may work but are not supported include:

       "aix"
           AIX disk labels.

       "amiga"
       "rdb"
           Amiga "Rigid Disk Block" format.

       "bsd"
           BSD disk labels.

       "dasd"
           DASD, used on IBM mainframes.

       "dvh"
           MIPS/SGI volumes.

       "mac"
           Old Mac partition format.  Modern Macs use "gpt".

       "pc98"
           NEC PC-98 format, common in Japan apparently.

       "sun"
           Sun disk labels.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.78)

   guestfs_part_list
        struct guestfs_partition_list *
        guestfs_part_list (guestfs_h *g,
                           const char *device);

       This command parses the partition table on "device" and returns the list of partitions
       found.

       The fields in the returned structure are:

       "part_num"
           Partition number, counting from 1.

       "part_start"
           Start of the partition in bytes.  To get sectors you have to divide by the device’s
           sector size, see "guestfs_blockdev_getss".

       "part_end"
           End of the partition in bytes.

       "part_size"
           Size of the partition in bytes.

       This function returns a "struct guestfs_partition_list *", or NULL if there was an error.
       The caller must call "guestfs_free_partition_list" after use.

       (Added in 1.0.78)

   guestfs_part_resize
        int
        guestfs_part_resize (guestfs_h *g,
                             const char *device,
                             int partnum,
                             int64_t endsect);

       This command resizes the partition numbered "partnum" on "device" by moving the end
       position.

       Note that this does not modify any filesystem present in the partition.  If you wish to do
       this, you will need to use filesystem resizing commands like "guestfs_resize2fs".

       When growing a partition you will want to grow the filesystem afterwards, but when
       shrinking, you need to shrink the filesystem before the partition.

       This function returns 0 on success or -1 on error.

       (Added in 1.37.20)

   guestfs_part_set_bootable
        int
        guestfs_part_set_bootable (guestfs_h *g,
                                   const char *device,
                                   int partnum,
                                   int bootable);

       This sets the bootable flag on partition numbered "partnum" on device "device".  Note that
       partitions are numbered from 1.

       The bootable flag is used by some operating systems (notably Windows) to determine which
       partition to boot from.  It is by no means universally recognized.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.78)

   guestfs_part_set_disk_guid
        int
        guestfs_part_set_disk_guid (guestfs_h *g,
                                    const char *device,
                                    const char *guid);

       Set the disk identifier (GUID) of a GPT-partitioned "device" to "guid".  Return an error
       if the partition table of "device" isn't GPT, or if "guid" is not a valid GUID.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "gdisk".  See also "guestfs_feature_available".

       (Added in 1.33.2)

   guestfs_part_set_disk_guid_random
        int
        guestfs_part_set_disk_guid_random (guestfs_h *g,
                                           const char *device);

       Set the disk identifier (GUID) of a GPT-partitioned "device" to a randomly generated
       value.  Return an error if the partition table of "device" isn't GPT.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "gdisk".  See also "guestfs_feature_available".

       (Added in 1.33.2)

   guestfs_part_set_gpt_attributes
        int
        guestfs_part_set_gpt_attributes (guestfs_h *g,
                                         const char *device,
                                         int partnum,
                                         int64_t attributes);

       Set the attribute flags of numbered GPT partition "partnum" to "attributes". Return an
       error if the partition table of "device" isn't GPT.

       See https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_entries for a useful list
       of partition attributes.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "gdisk".  See also "guestfs_feature_available".

       (Added in 1.21.1)

   guestfs_part_set_gpt_guid
        int
        guestfs_part_set_gpt_guid (guestfs_h *g,
                                   const char *device,
                                   int partnum,
                                   const char *guid);

       Set the GUID of numbered GPT partition "partnum" to "guid".  Return an error if the
       partition table of "device" isn't GPT, or if "guid" is not a valid GUID.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "gdisk".  See also "guestfs_feature_available".

       (Added in 1.29.25)

   guestfs_part_set_gpt_type
        int
        guestfs_part_set_gpt_type (guestfs_h *g,
                                   const char *device,
                                   int partnum,
                                   const char *guid);

       Set the type GUID of numbered GPT partition "partnum" to "guid". Return an error if the
       partition table of "device" isn't GPT, or if "guid" is not a valid GUID.

       See https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs for a useful
       list of type GUIDs.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "gdisk".  See also "guestfs_feature_available".

       (Added in 1.21.1)

   guestfs_part_set_mbr_id
        int
        guestfs_part_set_mbr_id (guestfs_h *g,
                                 const char *device,
                                 int partnum,
                                 int idbyte);

       Sets the MBR type byte (also known as the ID byte) of the numbered partition "partnum" to
       "idbyte".  Note that the type bytes quoted in most documentation are in fact hexadecimal
       numbers, but usually documented without any leading "0x" which might be confusing.

       Note that only MBR (old DOS-style) partitions have type bytes.  You will get undefined
       results for other partition table types (see "guestfs_part_get_parttype").

       This function returns 0 on success or -1 on error.

       (Added in 1.3.2)

   guestfs_part_set_name
        int
        guestfs_part_set_name (guestfs_h *g,
                               const char *device,
                               int partnum,
                               const char *name);

       This sets the partition name on partition numbered "partnum" on device "device".  Note
       that partitions are numbered from 1.

       The partition name can only be set on certain types of partition table.  This works on
       "gpt" but not on "mbr" partitions.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.78)

   guestfs_part_to_dev
        char *
        guestfs_part_to_dev (guestfs_h *g,
                             const char *partition);

       This function takes a partition name (eg. "/dev/sdb1") and removes the partition number,
       returning the device name (eg. "/dev/sdb").

       The named partition must exist, for example as a string returned from
       "guestfs_list_partitions".

       See also "guestfs_part_to_partnum", "guestfs_device_index".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.5.15)

   guestfs_part_to_partnum
        int
        guestfs_part_to_partnum (guestfs_h *g,
                                 const char *partition);

       This function takes a partition name (eg. "/dev/sdb1") and returns the partition number
       (eg. 1).

       The named partition must exist, for example as a string returned from
       "guestfs_list_partitions".

       See also "guestfs_part_to_dev".

       On error this function returns -1.

       (Added in 1.13.25)

   guestfs_ping_daemon
        int
        guestfs_ping_daemon (guestfs_h *g);

       This is a test probe into the guestfs daemon running inside the libguestfs appliance.
       Calling this function checks that the daemon responds to the ping message, without
       affecting the daemon or attached block device(s) in any other way.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.18)

   guestfs_pread
        char *
        guestfs_pread (guestfs_h *g,
                       const char *path,
                       int count,
                       int64_t offset,
                       size_t *size_r);

       This command lets you read part of a file.  It reads "count" bytes of the file, starting
       at "offset", from file "path".

       This may read fewer bytes than requested.  For further details see the pread(2) system
       call.

       See also "guestfs_pwrite", "guestfs_pread_device".

       This function returns a buffer, or NULL on error.  The size of the returned buffer is
       written to *size_r.  The caller must free the returned buffer after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.77)

   guestfs_pread_device
        char *
        guestfs_pread_device (guestfs_h *g,
                              const char *device,
                              int count,
                              int64_t offset,
                              size_t *size_r);

       This command lets you read part of a block device.  It reads "count" bytes of "device",
       starting at "offset".

       This may read fewer bytes than requested.  For further details see the pread(2) system
       call.

       See also "guestfs_pread".

       This function returns a buffer, or NULL on error.  The size of the returned buffer is
       written to *size_r.  The caller must free the returned buffer after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.5.21)

   guestfs_pvchange_uuid
        int
        guestfs_pvchange_uuid (guestfs_h *g,
                               const char *device);

       Generate a new random UUID for the physical volume "device".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.19.26)

   guestfs_pvchange_uuid_all
        int
        guestfs_pvchange_uuid_all (guestfs_h *g);

       Generate new random UUIDs for all physical volumes.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.19.26)

   guestfs_pvcreate
        int
        guestfs_pvcreate (guestfs_h *g,
                          const char *device);

       This creates an LVM physical volume on the named "device", where "device" should usually
       be a partition name such as /dev/sda1.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 0.8)

   guestfs_pvremove
        int
        guestfs_pvremove (guestfs_h *g,
                          const char *device);

       This wipes a physical volume "device" so that LVM will no longer recognise it.

       The implementation uses the pvremove(8) command which refuses to wipe physical volumes
       that contain any volume groups, so you have to remove those first.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.0.13)

   guestfs_pvresize
        int
        guestfs_pvresize (guestfs_h *g,
                          const char *device);

       This resizes (expands or shrinks) an existing LVM physical volume to match the new size of
       the underlying device.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.0.26)

   guestfs_pvresize_size
        int
        guestfs_pvresize_size (guestfs_h *g,
                               const char *device,
                               int64_t size);

       This command is the same as "guestfs_pvresize" except that it allows you to specify the
       new size (in bytes) explicitly.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.3.14)

   guestfs_pvs
        char **
        guestfs_pvs (guestfs_h *g);

       List all the physical volumes detected.  This is the equivalent of the pvs(8) command.

       This returns a list of just the device names that contain PVs (eg. /dev/sda2).

       See also "guestfs_pvs_full".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 0.4)

   guestfs_pvs_full
        struct guestfs_lvm_pv_list *
        guestfs_pvs_full (guestfs_h *g);

       List all the physical volumes detected.  This is the equivalent of the pvs(8) command.
       The "full" version includes all fields.

       This function returns a "struct guestfs_lvm_pv_list *", or NULL if there was an error.
       The caller must call "guestfs_free_lvm_pv_list" after use.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 0.4)

   guestfs_pvuuid
        char *
        guestfs_pvuuid (guestfs_h *g,
                        const char *device);

       This command returns the UUID of the LVM PV "device".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.87)

   guestfs_pwrite
        int
        guestfs_pwrite (guestfs_h *g,
                        const char *path,
                        const char *content,
                        size_t content_size,
                        int64_t offset);

       This command writes to part of a file.  It writes the data buffer "content" to the file
       "path" starting at offset "offset".

       This command implements the pwrite(2) system call, and like that system call it may not
       write the full data requested.  The return value is the number of bytes that were actually
       written to the file.  This could even be 0, although short writes are unlikely for regular
       files in ordinary circumstances.

       See also "guestfs_pread", "guestfs_pwrite_device".

       On error this function returns -1.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.3.14)

   guestfs_pwrite_device
        int
        guestfs_pwrite_device (guestfs_h *g,
                               const char *device,
                               const char *content,
                               size_t content_size,
                               int64_t offset);

       This command writes to part of a device.  It writes the data buffer "content" to "device"
       starting at offset "offset".

       This command implements the pwrite(2) system call, and like that system call it may not
       write the full data requested (although short writes to disk devices and partitions are
       probably impossible with standard Linux kernels).

       See also "guestfs_pwrite".

       On error this function returns -1.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.5.20)

   guestfs_read_file
        char *
        guestfs_read_file (guestfs_h *g,
                           const char *path,
                           size_t *size_r);

       This calls returns the contents of the file "path" as a buffer.

       Unlike "guestfs_cat", this function can correctly handle files that contain embedded ASCII
       NUL characters.

       This function returns a buffer, or NULL on error.  The size of the returned buffer is
       written to *size_r.  The caller must free the returned buffer after use.

       (Added in 1.0.63)

   guestfs_read_lines
        char **
        guestfs_read_lines (guestfs_h *g,
                            const char *path);

       Return the contents of the file named "path".

       The file contents are returned as a list of lines.  Trailing "LF" and "CRLF" character
       sequences are not returned.

       Note that this function cannot correctly handle binary files (specifically, files
       containing "\0" character which is treated as end of string).  For those you need to use
       the "guestfs_read_file" function and split the buffer into lines yourself.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 0.7)

   guestfs_readdir
        struct guestfs_dirent_list *
        guestfs_readdir (guestfs_h *g,
                         const char *dir);

       This returns the list of directory entries in directory "dir".

       All entries in the directory are returned, including "." and "..".  The entries are not
       sorted, but returned in the same order as the underlying filesystem.

       Also this call returns basic file type information about each file.  The "ftyp" field will
       contain one of the following characters:

       'b' Block special

       'c' Char special

       'd' Directory

       'f' FIFO (named pipe)

       'l' Symbolic link

       'r' Regular file

       's' Socket

       'u' Unknown file type

       '?' The readdir(3) call returned a "d_type" field with an unexpected value

       This function is primarily intended for use by programs.  To get a simple list of names,
       use "guestfs_ls".  To get a printable directory for human consumption, use "guestfs_ll".

       This function returns a "struct guestfs_dirent_list *", or NULL if there was an error.
       The caller must call "guestfs_free_dirent_list" after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.55)

   guestfs_readlink
        char *
        guestfs_readlink (guestfs_h *g,
                          const char *path);

       This command reads the target of a symbolic link.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.66)

   guestfs_readlinklist
        char **
        guestfs_readlinklist (guestfs_h *g,
                              const char *path,
                              char *const *names);

       This call allows you to do a "readlink" operation on multiple files, where all files are
       in the directory "path".  "names" is the list of files from this directory.

       On return you get a list of strings, with a one-to-one correspondence to the "names" list.
       Each string is the value of the symbolic link.

       If the readlink(2) operation fails on any name, then the corresponding result string is
       the empty string "".  However the whole operation is completed even if there were
       readlink(2) errors, and so you can call this function with names where you don't know if
       they are symbolic links already (albeit slightly less efficient).

       This call is intended for programs that want to efficiently list a directory contents
       without making many round-trips.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.0.77)

   guestfs_realpath
        char *
        guestfs_realpath (guestfs_h *g,
                          const char *path);

       Return the canonicalized absolute pathname of "path".  The returned path has no ".", ".."
       or symbolic link path elements.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.66)

   guestfs_remount
        int
        guestfs_remount (guestfs_h *g,
                         const char *mountpoint,
                         ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_REMOUNT_RW, int rw,

       This call allows you to change the "rw" (readonly/read-write) flag on an already mounted
       filesystem at "mountpoint", converting a readonly filesystem to be read-write, or vice-
       versa.

       Note that at the moment you must supply the "optional" "rw" parameter.  In future we may
       allow other flags to be adjusted.

       This function returns 0 on success or -1 on error.

       (Added in 1.23.2)

   guestfs_remount_va
        int
        guestfs_remount_va (guestfs_h *g,
                            const char *mountpoint,
                            va_list args);

       This is the "va_list variant" of "guestfs_remount".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_remount_argv
        int
        guestfs_remount_argv (guestfs_h *g,
                              const char *mountpoint,
                              const struct guestfs_remount_argv *optargs);

       This is the "argv variant" of "guestfs_remount".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_remove_drive
        int
        guestfs_remove_drive (guestfs_h *g,
                              const char *label);

       This function is deprecated.  There is no replacement.  Consult the API documentation in
       guestfs(3) for further information.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This call does nothing and returns an error.

       This function returns 0 on success or -1 on error.

       (Added in 1.19.49)

   guestfs_removexattr
        int
        guestfs_removexattr (guestfs_h *g,
                             const char *xattr,
                             const char *path);

       This call removes the extended attribute named "xattr" of the file "path".

       See also: "guestfs_lremovexattr", attr(5).

       This function returns 0 on success or -1 on error.

       This function depends on the feature "linuxxattrs".  See also "guestfs_feature_available".

       (Added in 1.0.59)

   guestfs_rename
        int
        guestfs_rename (guestfs_h *g,
                        const char *oldpath,
                        const char *newpath);

       Rename a file to a new place on the same filesystem.  This is the same as the Linux
       rename(2) system call.  In most cases you are better to use "guestfs_mv" instead.

       This function returns 0 on success or -1 on error.

       (Added in 1.21.5)

   guestfs_resize2fs
        int
        guestfs_resize2fs (guestfs_h *g,
                           const char *device);

       This resizes an ext2, ext3 or ext4 filesystem to match the size of the underlying device.

       See also "RESIZE2FS ERRORS".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.27)

   guestfs_resize2fs_M
        int
        guestfs_resize2fs_M (guestfs_h *g,
                             const char *device);

       This command is the same as "guestfs_resize2fs", but the filesystem is resized to its
       minimum size.  This works like the -M option to the resize2fs(8) command.

       To get the resulting size of the filesystem you should call "guestfs_tune2fs_l" and read
       the "Block size" and "Block count" values.  These two numbers, multiplied together, give
       the resulting size of the minimal filesystem in bytes.

       See also "RESIZE2FS ERRORS".

       This function returns 0 on success or -1 on error.

       (Added in 1.9.4)

   guestfs_resize2fs_size
        int
        guestfs_resize2fs_size (guestfs_h *g,
                                const char *device,
                                int64_t size);

       This command is the same as "guestfs_resize2fs" except that it allows you to specify the
       new size (in bytes) explicitly.

       See also "RESIZE2FS ERRORS".

       This function returns 0 on success or -1 on error.

       (Added in 1.3.14)

   guestfs_rm
        int
        guestfs_rm (guestfs_h *g,
                    const char *path);

       Remove the single file "path".

       This function returns 0 on success or -1 on error.

       (Added in 0.8)

   guestfs_rm_f
        int
        guestfs_rm_f (guestfs_h *g,
                      const char *path);

       Remove the file "path".

       If the file doesn't exist, that error is ignored.  (Other errors, eg. I/O errors or bad
       paths, are not ignored)

       This call cannot remove directories.  Use "guestfs_rmdir" to remove an empty directory, or
       "guestfs_rm_rf" to remove directories recursively.

       This function returns 0 on success or -1 on error.

       (Added in 1.19.42)

   guestfs_rm_rf
        int
        guestfs_rm_rf (guestfs_h *g,
                       const char *path);

       Remove the file or directory "path", recursively removing the contents if its a directory.
       This is like the "rm -rf" shell command.

       This function returns 0 on success or -1 on error.

       (Added in 0.8)

   guestfs_rmdir
        int
        guestfs_rmdir (guestfs_h *g,
                       const char *path);

       Remove the single directory "path".

       This function returns 0 on success or -1 on error.

       (Added in 0.8)

   guestfs_rmmountpoint
        int
        guestfs_rmmountpoint (guestfs_h *g,
                              const char *exemptpath);

       This call removes a mountpoint that was previously created with "guestfs_mkmountpoint".
       See "guestfs_mkmountpoint" for full details.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.62)

   guestfs_rsync
        int
        guestfs_rsync (guestfs_h *g,
                       const char *src,
                       const char *dest,
                       ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_RSYNC_ARCHIVE, int archive,
        GUESTFS_RSYNC_DELETEDEST, int deletedest,

       This call may be used to copy or synchronize two directories under the same libguestfs
       handle.  This uses the rsync(1) program which uses a fast algorithm that avoids copying
       files unnecessarily.

       "src" and "dest" are the source and destination directories.  Files are copied from "src"
       to "dest".

       The optional arguments are:

       "archive"
           Turns on archive mode.  This is the same as passing the --archive flag to "rsync".

       "deletedest"
           Delete files at the destination that do not exist at the source.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "rsync".  See also "guestfs_feature_available".

       (Added in 1.19.29)

   guestfs_rsync_va
        int
        guestfs_rsync_va (guestfs_h *g,
                          const char *src,
                          const char *dest,
                          va_list args);

       This is the "va_list variant" of "guestfs_rsync".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_rsync_argv
        int
        guestfs_rsync_argv (guestfs_h *g,
                            const char *src,
                            const char *dest,
                            const struct guestfs_rsync_argv *optargs);

       This is the "argv variant" of "guestfs_rsync".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_rsync_in
        int
        guestfs_rsync_in (guestfs_h *g,
                          const char *remote,
                          const char *dest,
                          ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_RSYNC_IN_ARCHIVE, int archive,
        GUESTFS_RSYNC_IN_DELETEDEST, int deletedest,

       This call may be used to copy or synchronize the filesystem on the host or on a remote
       computer with the filesystem within libguestfs.  This uses the rsync(1) program which uses
       a fast algorithm that avoids copying files unnecessarily.

       This call only works if the network is enabled.  See "guestfs_set_network" or the
       --network option to various tools like guestfish(1).

       Files are copied from the remote server and directory specified by "remote" to the
       destination directory "dest".

       The format of the remote server string is defined by rsync(1).  Note that there is no way
       to supply a password or passphrase so the target must be set up not to require one.

       The optional arguments are the same as those of "guestfs_rsync".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "rsync".  See also "guestfs_feature_available".

       (Added in 1.19.29)

   guestfs_rsync_in_va
        int
        guestfs_rsync_in_va (guestfs_h *g,
                             const char *remote,
                             const char *dest,
                             va_list args);

       This is the "va_list variant" of "guestfs_rsync_in".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_rsync_in_argv
        int
        guestfs_rsync_in_argv (guestfs_h *g,
                               const char *remote,
                               const char *dest,
                               const struct guestfs_rsync_in_argv *optargs);

       This is the "argv variant" of "guestfs_rsync_in".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_rsync_out
        int
        guestfs_rsync_out (guestfs_h *g,
                           const char *src,
                           const char *remote,
                           ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_RSYNC_OUT_ARCHIVE, int archive,
        GUESTFS_RSYNC_OUT_DELETEDEST, int deletedest,

       This call may be used to copy or synchronize the filesystem within libguestfs with a
       filesystem on the host or on a remote computer.  This uses the rsync(1) program which uses
       a fast algorithm that avoids copying files unnecessarily.

       This call only works if the network is enabled.  See "guestfs_set_network" or the
       --network option to various tools like guestfish(1).

       Files are copied from the source directory "src" to the remote server and directory
       specified by "remote".

       The format of the remote server string is defined by rsync(1).  Note that there is no way
       to supply a password or passphrase so the target must be set up not to require one.

       The optional arguments are the same as those of "guestfs_rsync".

       Globbing does not happen on the "src" parameter.  In programs which use the API directly
       you have to expand wildcards yourself (see "guestfs_glob_expand").  In guestfish you can
       use the "glob" command (see "glob" in guestfish(1)), for example:

        ><fs> glob rsync-out /* rsync://remote/

       This function returns 0 on success or -1 on error.

       This function depends on the feature "rsync".  See also "guestfs_feature_available".

       (Added in 1.19.29)

   guestfs_rsync_out_va
        int
        guestfs_rsync_out_va (guestfs_h *g,
                              const char *src,
                              const char *remote,
                              va_list args);

       This is the "va_list variant" of "guestfs_rsync_out".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_rsync_out_argv
        int
        guestfs_rsync_out_argv (guestfs_h *g,
                                const char *src,
                                const char *remote,
                                const struct guestfs_rsync_out_argv *optargs);

       This is the "argv variant" of "guestfs_rsync_out".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_scrub_device
        int
        guestfs_scrub_device (guestfs_h *g,
                              const char *device);

       This command writes patterns over "device" to make data retrieval more difficult.

       It is an interface to the scrub(1) program.  See that manual page for more details.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "scrub".  See also "guestfs_feature_available".

       (Added in 1.0.52)

   guestfs_scrub_file
        int
        guestfs_scrub_file (guestfs_h *g,
                            const char *file);

       This command writes patterns over a file to make data retrieval more difficult.

       The file is removed after scrubbing.

       It is an interface to the scrub(1) program.  See that manual page for more details.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "scrub".  See also "guestfs_feature_available".

       (Added in 1.0.52)

   guestfs_scrub_freespace
        int
        guestfs_scrub_freespace (guestfs_h *g,
                                 const char *dir);

       This command creates the directory "dir" and then fills it with files until the filesystem
       is full, and scrubs the files as for "guestfs_scrub_file", and deletes them.  The
       intention is to scrub any free space on the partition containing "dir".

       It is an interface to the scrub(1) program.  See that manual page for more details.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "scrub".  See also "guestfs_feature_available".

       (Added in 1.0.52)

   guestfs_selinux_relabel
        int
        guestfs_selinux_relabel (guestfs_h *g,
                                 const char *specfile,
                                 const char *path,
                                 ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_SELINUX_RELABEL_FORCE, int force,

       SELinux relabel parts of the filesystem.

       The "specfile" parameter controls the policy spec file used.  You have to parse
       "/etc/selinux/config" to find the correct SELinux policy and then pass the spec file,
       usually: "/etc/selinux/" + selinuxtype + "/contexts/files/file_contexts".

       The required "path" parameter is the top level directory where relabelling starts.
       Normally you should pass "path" as "/" to relabel the whole guest filesystem.

       The optional "force" boolean controls whether the context is reset for customizable files,
       and also whether the user, role and range parts of the file context is changed.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "selinuxrelabel".  See also
       "guestfs_feature_available".

       (Added in 1.33.43)

   guestfs_selinux_relabel_va
        int
        guestfs_selinux_relabel_va (guestfs_h *g,
                                    const char *specfile,
                                    const char *path,
                                    va_list args);

       This is the "va_list variant" of "guestfs_selinux_relabel".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_selinux_relabel_argv
        int
        guestfs_selinux_relabel_argv (guestfs_h *g,
                                      const char *specfile,
                                      const char *path,
                                      const struct guestfs_selinux_relabel_argv *optargs);

       This is the "argv variant" of "guestfs_selinux_relabel".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_set_append
        int
        guestfs_set_append (guestfs_h *g,
                            const char *append);

       This function is used to add additional options to the libguestfs appliance kernel command
       line.

       The default is "NULL" unless overridden by setting "LIBGUESTFS_APPEND" environment
       variable.

       Setting "append" to "NULL" means no additional options are passed (libguestfs always adds
       a few of its own).

       This function returns 0 on success or -1 on error.

       (Added in 1.0.26)

   guestfs_set_attach_method
        int
        guestfs_set_attach_method (guestfs_h *g,
                                   const char *backend);

       This function is deprecated.  In new code, use the "guestfs_set_backend" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       Set the method that libguestfs uses to connect to the backend guestfsd daemon.

       See "BACKEND".

       This function returns 0 on success or -1 on error.

       (Added in 1.9.8)

   guestfs_set_autosync
        int
        guestfs_set_autosync (guestfs_h *g,
                              int autosync);

       If "autosync" is true, this enables autosync.  Libguestfs will make a best effort attempt
       to make filesystems consistent and synchronized when the handle is closed (also if the
       program exits without closing handles).

       This is enabled by default (since libguestfs 1.5.24, previously it was disabled by
       default).

       This function returns 0 on success or -1 on error.

       (Added in 0.3)

   guestfs_set_backend
        int
        guestfs_set_backend (guestfs_h *g,
                             const char *backend);

       Set the method that libguestfs uses to connect to the backend guestfsd daemon.

       This handle property was previously called the "attach method".

       See "BACKEND".

       This function returns 0 on success or -1 on error.

       (Added in 1.21.26)

   guestfs_set_backend_setting
        int
        guestfs_set_backend_setting (guestfs_h *g,
                                     const char *name,
                                     const char *val);

       Append "name=value" to the backend settings string list.  However if a string already
       exists matching "name" or beginning with "name=", then that setting is replaced.

       See "BACKEND", "BACKEND SETTINGS".

       This function returns 0 on success or -1 on error.

       (Added in 1.27.2)

   guestfs_set_backend_settings
        int
        guestfs_set_backend_settings (guestfs_h *g,
                                      char *const *settings);

       Set a list of zero or more settings which are passed through to the current backend.  Each
       setting is a string which is interpreted in a backend-specific way, or ignored if not
       understood by the backend.

       The default value is an empty list, unless the environment variable
       "LIBGUESTFS_BACKEND_SETTINGS" was set when the handle was created.  This environment
       variable contains a colon-separated list of settings.

       This call replaces all backend settings.  If you want to replace a single backend setting,
       see "guestfs_set_backend_setting".  If you want to clear a single backend setting, see
       "guestfs_clear_backend_setting".

       See "BACKEND", "BACKEND SETTINGS".

       This function returns 0 on success or -1 on error.

       (Added in 1.25.24)

   guestfs_set_cachedir
        int
        guestfs_set_cachedir (guestfs_h *g,
                              const char *cachedir);

       Set the directory used by the handle to store the appliance cache, when using a supermin
       appliance.  The appliance is cached and shared between all handles which have the same
       effective user ID.

       The environment variables "LIBGUESTFS_CACHEDIR" and "TMPDIR" control the default value: If
       "LIBGUESTFS_CACHEDIR" is set, then that is the default.  Else if "TMPDIR" is set, then
       that is the default.  Else /var/tmp is the default.

       This function returns 0 on success or -1 on error.

       (Added in 1.19.58)

   guestfs_set_direct
        int
        guestfs_set_direct (guestfs_h *g,
                            int direct);

       This function is deprecated.  In new code, use the "guestfs_internal_get_console_socket"
       call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       If the direct appliance mode flag is enabled, then stdin and stdout are passed directly
       through to the appliance once it is launched.

       One consequence of this is that log messages aren't caught by the library and handled by
       "guestfs_set_log_message_callback", but go straight to stdout.

       You probably don't want to use this unless you know what you are doing.

       The default is disabled.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.72)

   guestfs_set_e2attrs
        int
        guestfs_set_e2attrs (guestfs_h *g,
                             const char *file,
                             const char *attrs,
                             ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_SET_E2ATTRS_CLEAR, int clear,

       This sets or clears the file attributes "attrs" associated with the inode file.

       "attrs" is a string of characters representing file attributes.  See "guestfs_get_e2attrs"
       for a list of possible attributes.  Not all attributes can be changed.

       If optional boolean "clear" is not present or false, then the "attrs" listed are set in
       the inode.

       If "clear" is true, then the "attrs" listed are cleared in the inode.

       In both cases, other attributes not present in the "attrs" string are left unchanged.

       These attributes are only present when the file is located on an ext2/3/4 filesystem.
       Using this call on other filesystem types will result in an error.

       This function returns 0 on success or -1 on error.

       (Added in 1.17.31)

   guestfs_set_e2attrs_va
        int
        guestfs_set_e2attrs_va (guestfs_h *g,
                                const char *file,
                                const char *attrs,
                                va_list args);

       This is the "va_list variant" of "guestfs_set_e2attrs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_set_e2attrs_argv
        int
        guestfs_set_e2attrs_argv (guestfs_h *g,
                                  const char *file,
                                  const char *attrs,
                                  const struct guestfs_set_e2attrs_argv *optargs);

       This is the "argv variant" of "guestfs_set_e2attrs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_set_e2generation
        int
        guestfs_set_e2generation (guestfs_h *g,
                                  const char *file,
                                  int64_t generation);

       This sets the ext2 file generation of a file.

       See "guestfs_get_e2generation".

       This function returns 0 on success or -1 on error.

       (Added in 1.17.31)

   guestfs_set_e2label
        int
        guestfs_set_e2label (guestfs_h *g,
                             const char *device,
                             const char *label);

       This function is deprecated.  In new code, use the "guestfs_set_label" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This sets the ext2/3/4 filesystem label of the filesystem on "device" to "label".
       Filesystem labels are limited to 16 characters.

       You can use either "guestfs_tune2fs_l" or "guestfs_get_e2label" to return the existing
       label on a filesystem.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.15)

   guestfs_set_e2uuid
        int
        guestfs_set_e2uuid (guestfs_h *g,
                            const char *device,
                            const char *uuid);

       This function is deprecated.  In new code, use the "guestfs_set_uuid" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This sets the ext2/3/4 filesystem UUID of the filesystem on "device" to "uuid".  The
       format of the UUID and alternatives such as "clear", "random" and "time" are described in
       the tune2fs(8) manpage.

       You can use "guestfs_vfs_uuid" to return the existing UUID of a filesystem.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.15)

   guestfs_set_hv
        int
        guestfs_set_hv (guestfs_h *g,
                        const char *hv);

       Set the hypervisor binary that we will use.  The hypervisor depends on the backend, but is
       usually the location of the qemu/KVM hypervisor.

       The default is chosen when the library was compiled by the configure script.

       You can also override this by setting the "LIBGUESTFS_HV" environment variable.

       Note that you should call this function as early as possible after creating the handle.
       This is because some pre-launch operations depend on testing qemu features (by running
       "qemu -help").  If the qemu binary changes, we don't retest features, and so you might see
       inconsistent results.  Using the environment variable "LIBGUESTFS_HV" is safest of all
       since that picks the qemu binary at the same time as the handle is created.

       This function returns 0 on success or -1 on error.

       (Added in 1.23.17)

   guestfs_set_identifier
        int
        guestfs_set_identifier (guestfs_h *g,
                                const char *identifier);

       This is an informative string which the caller may optionally set in the handle.  It is
       printed in various places, allowing the current handle to be identified in debugging
       output.

       One important place is when tracing is enabled.  If the identifier string is not an empty
       string, then trace messages change from this:

        libguestfs: trace: get_tmpdir
        libguestfs: trace: get_tmpdir = "/tmp"

       to this:

        libguestfs: trace: ID: get_tmpdir
        libguestfs: trace: ID: get_tmpdir = "/tmp"

       where "ID" is the identifier string set by this call.

       The identifier must only contain alphanumeric ASCII characters, underscore and minus sign.
       The default is the empty string.

       See also "guestfs_set_program", "guestfs_set_trace", "guestfs_get_identifier".

       This function returns 0 on success or -1 on error.

       (Added in 1.31.14)

   guestfs_set_label
        int
        guestfs_set_label (guestfs_h *g,
                           const char *mountable,
                           const char *label);

       Set the filesystem label on "mountable" to "label".

       Only some filesystem types support labels, and libguestfs supports setting labels on only
       a subset of these.

       ext2, ext3, ext4
           Labels are limited to 16 bytes.

       NTFS
           Labels are limited to 128 unicode characters.

       XFS The label is limited to 12 bytes.  The filesystem must not be mounted when trying to
           set the label.

       btrfs
           The label is limited to 255 bytes and some characters are not allowed.  Setting the
           label on a btrfs subvolume will set the label on its parent filesystem.  The
           filesystem must not be mounted when trying to set the label.

       fat The label is limited to 11 bytes.

       swap
           The label is limited to 16 bytes.

       If there is no support for changing the label for the type of the specified filesystem,
       set_label will fail and set errno as ENOTSUP.

       To read the label on a filesystem, call "guestfs_vfs_label".

       This function returns 0 on success or -1 on error.

       (Added in 1.17.9)

   guestfs_set_libvirt_requested_credential
        int
        guestfs_set_libvirt_requested_credential (guestfs_h *g,
                                                  int index,
                                                  const char *cred,
                                                  size_t cred_size);

       After requesting the "index"'th credential from the user, call this function to pass the
       answer back to libvirt.

       See "LIBVIRT AUTHENTICATION" for documentation and example code.

       This function returns 0 on success or -1 on error.

       (Added in 1.19.52)

   guestfs_set_libvirt_supported_credentials
        int
        guestfs_set_libvirt_supported_credentials (guestfs_h *g,
                                                   char *const *creds);

       Call this function before setting an event handler for "GUESTFS_EVENT_LIBVIRT_AUTH", to
       supply the list of credential types that the program knows how to process.

       The "creds" list must be a non-empty list of strings.  Possible strings are:

       "username"
       "authname"
       "language"
       "cnonce"
       "passphrase"
       "echoprompt"
       "noechoprompt"
       "realm"
       "external"

       See libvirt documentation for the meaning of these credential types.

       See "LIBVIRT AUTHENTICATION" for documentation and example code.

       This function returns 0 on success or -1 on error.

       (Added in 1.19.52)

   guestfs_set_memsize
        int
        guestfs_set_memsize (guestfs_h *g,
                             int memsize);

       This sets the memory size in megabytes allocated to the hypervisor.  This only has any
       effect if called before "guestfs_launch".

       You can also change this by setting the environment variable "LIBGUESTFS_MEMSIZE" before
       the handle is created.

       For more information on the architecture of libguestfs, see guestfs(3).

       This function returns 0 on success or -1 on error.

       (Added in 1.0.55)

   guestfs_set_network
        int
        guestfs_set_network (guestfs_h *g,
                             int network);

       If "network" is true, then the network is enabled in the libguestfs appliance.  The
       default is false.

       This affects whether commands are able to access the network (see "RUNNING COMMANDS").

       You must call this before calling "guestfs_launch", otherwise it has no effect.

       This function returns 0 on success or -1 on error.

       (Added in 1.5.4)

   guestfs_set_path
        int
        guestfs_set_path (guestfs_h *g,
                          const char *searchpath);

       Set the path that libguestfs searches for kernel and initrd.img.

       The default is "$libdir/guestfs" unless overridden by setting "LIBGUESTFS_PATH"
       environment variable.

       Setting "path" to "NULL" restores the default path.

       This function returns 0 on success or -1 on error.

       (Added in 0.3)

   guestfs_set_pgroup
        int
        guestfs_set_pgroup (guestfs_h *g,
                            int pgroup);

       If "pgroup" is true, child processes are placed into their own process group.

       The practical upshot of this is that signals like "SIGINT" (from users pressing "^C")
       won't be received by the child process.

       The default for this flag is false, because usually you want "^C" to kill the subprocess.
       Guestfish sets this flag to true when used interactively, so that "^C" can cancel long-
       running commands gracefully (see "guestfs_user_cancel").

       This function returns 0 on success or -1 on error.

       (Added in 1.11.18)

   guestfs_set_program
        int
        guestfs_set_program (guestfs_h *g,
                             const char *program);

       Set the program name.  This is an informative string which the main program may optionally
       set in the handle.

       When the handle is created, the program name in the handle is set to the basename from
       "argv[0]".  The program name can never be "NULL".

       This function returns 0 on success or -1 on error.

       (Added in 1.21.29)

   guestfs_set_qemu
        int
        guestfs_set_qemu (guestfs_h *g,
                          const char *hv);

       This function is deprecated.  In new code, use the "guestfs_set_hv" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       Set the hypervisor binary (usually qemu) that we will use.

       The default is chosen when the library was compiled by the configure script.

       You can also override this by setting the "LIBGUESTFS_HV" environment variable.

       Setting "hv" to "NULL" restores the default qemu binary.

       Note that you should call this function as early as possible after creating the handle.
       This is because some pre-launch operations depend on testing qemu features (by running
       "qemu -help").  If the qemu binary changes, we don't retest features, and so you might see
       inconsistent results.  Using the environment variable "LIBGUESTFS_HV" is safest of all
       since that picks the qemu binary at the same time as the handle is created.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.6)

   guestfs_set_recovery_proc
        int
        guestfs_set_recovery_proc (guestfs_h *g,
                                   int recoveryproc);

       If this is called with the parameter "false" then "guestfs_launch" does not create a
       recovery process.  The purpose of the recovery process is to stop runaway hypervisor
       processes in the case where the main program aborts abruptly.

       This only has any effect if called before "guestfs_launch", and the default is true.

       About the only time when you would want to disable this is if the main process will fork
       itself into the background ("daemonize" itself).  In this case the recovery process thinks
       that the main program has disappeared and so kills the hypervisor, which is not very
       helpful.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.77)

   guestfs_set_selinux
        int
        guestfs_set_selinux (guestfs_h *g,
                             int selinux);

       This function is deprecated.  In new code, use the "guestfs_selinux_relabel" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This sets the selinux flag that is passed to the appliance at boot time.  The default is
       "selinux=0" (disabled).

       Note that if SELinux is enabled, it is always in Permissive mode ("enforcing=0").

       For more information on the architecture of libguestfs, see guestfs(3).

       This function returns 0 on success or -1 on error.

       (Added in 1.0.67)

   guestfs_set_smp
        int
        guestfs_set_smp (guestfs_h *g,
                         int smp);

       Change the number of virtual CPUs assigned to the appliance.  The default is 1.
       Increasing this may improve performance, though often it has no effect.

       This function must be called before "guestfs_launch".

       This function returns 0 on success or -1 on error.

       (Added in 1.13.15)

   guestfs_set_tmpdir
        int
        guestfs_set_tmpdir (guestfs_h *g,
                            const char *tmpdir);

       Set the directory used by the handle to store temporary files.

       The environment variables "LIBGUESTFS_TMPDIR" and "TMPDIR" control the default value: If
       "LIBGUESTFS_TMPDIR" is set, then that is the default.  Else if "TMPDIR" is set, then that
       is the default.  Else /tmp is the default.

       This function returns 0 on success or -1 on error.

       (Added in 1.19.58)

   guestfs_set_trace
        int
        guestfs_set_trace (guestfs_h *g,
                           int trace);

       If the command trace flag is set to 1, then libguestfs calls, parameters and return values
       are traced.

       If you want to trace C API calls into libguestfs (and other libraries) then possibly a
       better way is to use the external ltrace(1) command.

       Command traces are disabled unless the environment variable "LIBGUESTFS_TRACE" is defined
       and set to 1.

       Trace messages are normally sent to "stderr", unless you register a callback to send them
       somewhere else (see "guestfs_set_event_callback").

       This function returns 0 on success or -1 on error.

       (Added in 1.0.69)

   guestfs_set_uuid
        int
        guestfs_set_uuid (guestfs_h *g,
                          const char *device,
                          const char *uuid);

       Set the filesystem UUID on "device" to "uuid".  If this fails and the errno is ENOTSUP,
       means that there is no support for changing the UUID for the type of the specified
       filesystem.

       Only some filesystem types support setting UUIDs.

       To read the UUID on a filesystem, call "guestfs_vfs_uuid".

       This function returns 0 on success or -1 on error.

       (Added in 1.23.10)

   guestfs_set_uuid_random
        int
        guestfs_set_uuid_random (guestfs_h *g,
                                 const char *device);

       Set the filesystem UUID on "device" to a random UUID.  If this fails and the errno is
       ENOTSUP, means that there is no support for changing the UUID for the type of the
       specified filesystem.

       Only some filesystem types support setting UUIDs.

       To read the UUID on a filesystem, call "guestfs_vfs_uuid".

       This function returns 0 on success or -1 on error.

       (Added in 1.29.50)

   guestfs_set_verbose
        int
        guestfs_set_verbose (guestfs_h *g,
                             int verbose);

       If "verbose" is true, this turns on verbose messages.

       Verbose messages are disabled unless the environment variable "LIBGUESTFS_DEBUG" is
       defined and set to 1.

       Verbose messages are normally sent to "stderr", unless you register a callback to send
       them somewhere else (see "guestfs_set_event_callback").

       This function returns 0 on success or -1 on error.

       (Added in 0.3)

   guestfs_setcon
        int
        guestfs_setcon (guestfs_h *g,
                        const char *context);

       This function is deprecated.  In new code, use the "guestfs_selinux_relabel" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This sets the SELinux security context of the daemon to the string "context".

       See the documentation about SELINUX in guestfs(3).

       This function returns 0 on success or -1 on error.

       This function depends on the feature "selinux".  See also "guestfs_feature_available".

       (Added in 1.0.67)

   guestfs_setxattr
        int
        guestfs_setxattr (guestfs_h *g,
                          const char *xattr,
                          const char *val,
                          int vallen,
                          const char *path);

       This call sets the extended attribute named "xattr" of the file "path" to the value "val"
       (of length "vallen").  The value is arbitrary 8 bit data.

       See also: "guestfs_lsetxattr", attr(5).

       This function returns 0 on success or -1 on error.

       This function depends on the feature "linuxxattrs".  See also "guestfs_feature_available".

       (Added in 1.0.59)

   guestfs_sfdisk
        int
        guestfs_sfdisk (guestfs_h *g,
                        const char *device,
                        int cyls,
                        int heads,
                        int sectors,
                        char *const *lines);

       This function is deprecated.  In new code, use the "guestfs_part_add" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This is a direct interface to the sfdisk(8) program for creating partitions on block
       devices.

       "device" should be a block device, for example /dev/sda.

       "cyls", "heads" and "sectors" are the number of cylinders, heads and sectors on the
       device, which are passed directly to sfdisk(8) as the -C, -H and -S parameters.  If you
       pass 0 for any of these, then the corresponding parameter is omitted.  Usually for ‘large’
       disks, you can just pass 0 for these, but for small (floppy-sized) disks, sfdisk(8) (or
       rather, the kernel) cannot work out the right geometry and you will need to tell it.

       "lines" is a list of lines that we feed to sfdisk(8).  For more information refer to the
       sfdisk(8) manpage.

       To create a single partition occupying the whole disk, you would pass "lines" as a single
       element list, when the single element being the string "," (comma).

       See also: "guestfs_sfdisk_l", "guestfs_sfdisk_N", "guestfs_part_init"

       This function returns 0 on success or -1 on error.

       (Added in 0.8)

   guestfs_sfdiskM
        int
        guestfs_sfdiskM (guestfs_h *g,
                         const char *device,
                         char *const *lines);

       This function is deprecated.  In new code, use the "guestfs_part_add" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This is a simplified interface to the "guestfs_sfdisk" command, where partition sizes are
       specified in megabytes only (rounded to the nearest cylinder) and you don't need to
       specify the cyls, heads and sectors parameters which were rarely if ever used anyway.

       See also: "guestfs_sfdisk", the sfdisk(8) manpage and "guestfs_part_disk"

       This function returns 0 on success or -1 on error.

       (Added in 1.0.55)

   guestfs_sfdisk_N
        int
        guestfs_sfdisk_N (guestfs_h *g,
                          const char *device,
                          int partnum,
                          int cyls,
                          int heads,
                          int sectors,
                          const char *line);

       This function is deprecated.  In new code, use the "guestfs_part_add" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This runs sfdisk(8) option to modify just the single partition "n" (note: "n" counts from
       1).

       For other parameters, see "guestfs_sfdisk".  You should usually pass 0 for the
       cyls/heads/sectors parameters.

       See also: "guestfs_part_add"

       This function returns 0 on success or -1 on error.

       (Added in 1.0.26)

   guestfs_sfdisk_disk_geometry
        char *
        guestfs_sfdisk_disk_geometry (guestfs_h *g,
                                      const char *device);

       This displays the disk geometry of "device" read from the partition table.  Especially in
       the case where the underlying block device has been resized, this can be different from
       the kernel’s idea of the geometry (see "guestfs_sfdisk_kernel_geometry").

       The result is in human-readable format, and not designed to be parsed.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.26)

   guestfs_sfdisk_kernel_geometry
        char *
        guestfs_sfdisk_kernel_geometry (guestfs_h *g,
                                        const char *device);

       This displays the kernel’s idea of the geometry of "device".

       The result is in human-readable format, and not designed to be parsed.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.26)

   guestfs_sfdisk_l
        char *
        guestfs_sfdisk_l (guestfs_h *g,
                          const char *device);

       This function is deprecated.  In new code, use the "guestfs_part_list" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This displays the partition table on "device", in the human-readable output of the
       sfdisk(8) command.  It is not intended to be parsed.

       See also: "guestfs_part_list"

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.26)

   guestfs_sh
        char *
        guestfs_sh (guestfs_h *g,
                    const char *command);

       This call runs a command from the guest filesystem via the guest’s /bin/sh.

       This is like "guestfs_command", but passes the command to:

        /bin/sh -c "command"

       Depending on the guest’s shell, this usually results in wildcards being expanded, shell
       expressions being interpolated and so on.

       All the provisos about "guestfs_command" apply to this call.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.50)

   guestfs_sh_lines
        char **
        guestfs_sh_lines (guestfs_h *g,
                          const char *command);

       This is the same as "guestfs_sh", but splits the result into a list of lines.

       See also: "guestfs_command_lines"

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.0.50)

   guestfs_shutdown
        int
        guestfs_shutdown (guestfs_h *g);

       This is the opposite of "guestfs_launch".  It performs an orderly shutdown of the backend
       process(es).  If the autosync flag is set (which is the default) then the disk image is
       synchronized.

       If the subprocess exits with an error then this function will return an error, which
       should not be ignored (it may indicate that the disk image could not be written out
       properly).

       It is safe to call this multiple times.  Extra calls are ignored.

       This call does not close or free up the handle.  You still need to call "guestfs_close"
       afterwards.

       "guestfs_close" will call this if you don't do it explicitly, but note that any errors are
       ignored in that case.

       This function returns 0 on success or -1 on error.

       (Added in 1.19.16)

   guestfs_sleep
        int
        guestfs_sleep (guestfs_h *g,
                       int secs);

       Sleep for "secs" seconds.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.41)

   guestfs_stat
        struct guestfs_stat *
        guestfs_stat (guestfs_h *g,
                      const char *path);

       This function is deprecated.  In new code, use the "guestfs_statns" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       Returns file information for the given "path".

       This is the same as the stat(2) system call.

       This function returns a "struct guestfs_stat *", or NULL if there was an error.  The
       caller must call "guestfs_free_stat" after use.

       (Added in 1.9.2)

   guestfs_statns
        struct guestfs_statns *
        guestfs_statns (guestfs_h *g,
                        const char *path);

       Returns file information for the given "path".

       This is the same as the stat(2) system call.

       This function returns a "struct guestfs_statns *", or NULL if there was an error.  The
       caller must call "guestfs_free_statns" after use.

       (Added in 1.27.53)

   guestfs_statvfs
        struct guestfs_statvfs *
        guestfs_statvfs (guestfs_h *g,
                         const char *path);

       Returns file system statistics for any mounted file system.  "path" should be a file or
       directory in the mounted file system (typically it is the mount point itself, but it
       doesn't need to be).

       This is the same as the statvfs(2) system call.

       This function returns a "struct guestfs_statvfs *", or NULL if there was an error.  The
       caller must call "guestfs_free_statvfs" after use.

       (Added in 1.9.2)

   guestfs_strings
        char **
        guestfs_strings (guestfs_h *g,
                         const char *path);

       This runs the strings(1) command on a file and returns the list of printable strings
       found.

       The "strings" command has, in the past, had problems with parsing untrusted files.  These
       are mitigated in the current version of libguestfs, but see "CVE-2014-8484".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.22)

   guestfs_strings_e
        char **
        guestfs_strings_e (guestfs_h *g,
                           const char *encoding,
                           const char *path);

       This is like the "guestfs_strings" command, but allows you to specify the encoding of
       strings that are looked for in the source file "path".

       Allowed encodings are:

       s   Single 7-bit-byte characters like ASCII and the ASCII-compatible parts of ISO-8859-X
           (this is what "guestfs_strings" uses).

       S   Single 8-bit-byte characters.

       b   16-bit big endian strings such as those encoded in UTF-16BE or UCS-2BE.

       l (lower case letter L)
           16-bit little endian such as UTF-16LE and UCS-2LE.  This is useful for examining
           binaries in Windows guests.

       B   32-bit big endian such as UCS-4BE.

       L   32-bit little endian such as UCS-4LE.

       The returned strings are transcoded to UTF-8.

       The "strings" command has, in the past, had problems with parsing untrusted files.  These
       are mitigated in the current version of libguestfs, but see "CVE-2014-8484".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.22)

   guestfs_swapoff_device
        int
        guestfs_swapoff_device (guestfs_h *g,
                                const char *device);

       This command disables the libguestfs appliance swap device or partition named "device".
       See "guestfs_swapon_device".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_swapoff_file
        int
        guestfs_swapoff_file (guestfs_h *g,
                              const char *file);

       This command disables the libguestfs appliance swap on file.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_swapoff_label
        int
        guestfs_swapoff_label (guestfs_h *g,
                               const char *label);

       This command disables the libguestfs appliance swap on labeled swap partition.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_swapoff_uuid
        int
        guestfs_swapoff_uuid (guestfs_h *g,
                              const char *uuid);

       This command disables the libguestfs appliance swap partition with the given UUID.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "linuxfsuuid".  See also "guestfs_feature_available".

       (Added in 1.0.66)

   guestfs_swapon_device
        int
        guestfs_swapon_device (guestfs_h *g,
                               const char *device);

       This command enables the libguestfs appliance to use the swap device or partition named
       "device".  The increased memory is made available for all commands, for example those run
       using "guestfs_command" or "guestfs_sh".

       Note that you should not swap to existing guest swap partitions unless you know what you
       are doing.  They may contain hibernation information, or other information that the guest
       doesn't want you to trash.  You also risk leaking information about the host to the guest
       this way.  Instead, attach a new host device to the guest and swap on that.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_swapon_file
        int
        guestfs_swapon_file (guestfs_h *g,
                             const char *file);

       This command enables swap to a file.  See "guestfs_swapon_device" for other notes.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_swapon_label
        int
        guestfs_swapon_label (guestfs_h *g,
                              const char *label);

       This command enables swap to a labeled swap partition.  See "guestfs_swapon_device" for
       other notes.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.66)

   guestfs_swapon_uuid
        int
        guestfs_swapon_uuid (guestfs_h *g,
                             const char *uuid);

       This command enables swap to a swap partition with the given UUID.  See
       "guestfs_swapon_device" for other notes.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "linuxfsuuid".  See also "guestfs_feature_available".

       (Added in 1.0.66)

   guestfs_sync
        int
        guestfs_sync (guestfs_h *g);

       This syncs the disk, so that any writes are flushed through to the underlying disk image.

       You should always call this if you have modified a disk image, before closing the handle.

       This function returns 0 on success or -1 on error.

       (Added in 0.3)

   guestfs_syslinux
        int
        guestfs_syslinux (guestfs_h *g,
                          const char *device,
                          ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_SYSLINUX_DIRECTORY, const char *directory,

       Install the SYSLINUX bootloader on "device".

       The device parameter must be either a whole disk formatted as a FAT filesystem, or a
       partition formatted as a FAT filesystem.  In the latter case, the partition should be
       marked as "active" ("guestfs_part_set_bootable") and a Master Boot Record must be
       installed (eg. using "guestfs_pwrite_device") on the first sector of the whole disk.  The
       SYSLINUX package comes with some suitable Master Boot Records.  See the syslinux(1) man
       page for further information.

       The optional arguments are:

       directory
           Install SYSLINUX in the named subdirectory, instead of in the root directory of the
           FAT filesystem.

       Additional configuration can be supplied to SYSLINUX by placing a file called syslinux.cfg
       on the FAT filesystem, either in the root directory, or under directory if that optional
       argument is being used.  For further information about the contents of this file, see
       syslinux(1).

       See also "guestfs_extlinux".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "syslinux".  See also "guestfs_feature_available".

       (Added in 1.21.27)

   guestfs_syslinux_va
        int
        guestfs_syslinux_va (guestfs_h *g,
                             const char *device,
                             va_list args);

       This is the "va_list variant" of "guestfs_syslinux".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_syslinux_argv
        int
        guestfs_syslinux_argv (guestfs_h *g,
                               const char *device,
                               const struct guestfs_syslinux_argv *optargs);

       This is the "argv variant" of "guestfs_syslinux".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_tail
        char **
        guestfs_tail (guestfs_h *g,
                      const char *path);

       This command returns up to the last 10 lines of a file as a list of strings.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.54)

   guestfs_tail_n
        char **
        guestfs_tail_n (guestfs_h *g,
                        int nrlines,
                        const char *path);

       If the parameter "nrlines" is a positive number, this returns the last "nrlines" lines of
       the file "path".

       If the parameter "nrlines" is a negative number, this returns lines from the file "path",
       starting with the "-nrlines"'th line.

       If the parameter "nrlines" is zero, this returns an empty list.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.54)

   guestfs_tar_in
        int
        guestfs_tar_in (guestfs_h *g,
                        const char *tarfile,
                        const char *directory);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_tar_in_opts" with no optional arguments.

       (Added in 1.0.3)

   guestfs_tar_in_opts
        int
        guestfs_tar_in_opts (guestfs_h *g,
                             const char *tarfile,
                             const char *directory,
                             ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_TAR_IN_OPTS_COMPRESS, const char *compress,
        GUESTFS_TAR_IN_OPTS_XATTRS, int xattrs,
        GUESTFS_TAR_IN_OPTS_SELINUX, int selinux,
        GUESTFS_TAR_IN_OPTS_ACLS, int acls,

       This command uploads and unpacks local file "tarfile" into directory.

       The optional "compress" flag controls compression.  If not given, then the input should be
       an uncompressed tar file.  Otherwise one of the following strings may be given to select
       the compression type of the input file: "compress", "gzip", "bzip2", "xz", "lzop".  (Note
       that not all builds of libguestfs will support all of these compression types).

       The other optional arguments are:

       "xattrs"
           If set to true, extended attributes are restored from the tar file.

       "selinux"
           If set to true, SELinux contexts are restored from the tar file.

       "acls"
           If set to true, POSIX ACLs are restored from the tar file.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.3)

   guestfs_tar_in_opts_va
        int
        guestfs_tar_in_opts_va (guestfs_h *g,
                                const char *tarfile,
                                const char *directory,
                                va_list args);

       This is the "va_list variant" of "guestfs_tar_in_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_tar_in_opts_argv
        int
        guestfs_tar_in_opts_argv (guestfs_h *g,
                                  const char *tarfile,
                                  const char *directory,
                                  const struct guestfs_tar_in_opts_argv *optargs);

       This is the "argv variant" of "guestfs_tar_in_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_tar_out
        int
        guestfs_tar_out (guestfs_h *g,
                         const char *directory,
                         const char *tarfile);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_tar_out_opts" with no optional arguments.

       (Added in 1.0.3)

   guestfs_tar_out_opts
        int
        guestfs_tar_out_opts (guestfs_h *g,
                              const char *directory,
                              const char *tarfile,
                              ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_TAR_OUT_OPTS_COMPRESS, const char *compress,
        GUESTFS_TAR_OUT_OPTS_NUMERICOWNER, int numericowner,
        GUESTFS_TAR_OUT_OPTS_EXCLUDES, char *const *excludes,
        GUESTFS_TAR_OUT_OPTS_XATTRS, int xattrs,
        GUESTFS_TAR_OUT_OPTS_SELINUX, int selinux,
        GUESTFS_TAR_OUT_OPTS_ACLS, int acls,

       This command packs the contents of directory and downloads it to local file "tarfile".

       The optional "compress" flag controls compression.  If not given, then the output will be
       an uncompressed tar file.  Otherwise one of the following strings may be given to select
       the compression type of the output file: "compress", "gzip", "bzip2", "xz", "lzop".  (Note
       that not all builds of libguestfs will support all of these compression types).

       The other optional arguments are:

       "excludes"
           A list of wildcards.  Files are excluded if they match any of the wildcards.

       "numericowner"
           If set to true, the output tar file will contain UID/GID numbers instead of user/group
           names.

       "xattrs"
           If set to true, extended attributes are saved in the output tar.

       "selinux"
           If set to true, SELinux contexts are saved in the output tar.

       "acls"
           If set to true, POSIX ACLs are saved in the output tar.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.3)

   guestfs_tar_out_opts_va
        int
        guestfs_tar_out_opts_va (guestfs_h *g,
                                 const char *directory,
                                 const char *tarfile,
                                 va_list args);

       This is the "va_list variant" of "guestfs_tar_out_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_tar_out_opts_argv
        int
        guestfs_tar_out_opts_argv (guestfs_h *g,
                                   const char *directory,
                                   const char *tarfile,
                                   const struct guestfs_tar_out_opts_argv *optargs);

       This is the "argv variant" of "guestfs_tar_out_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_tgz_in
        int
        guestfs_tgz_in (guestfs_h *g,
                        const char *tarball,
                        const char *directory);

       This function is deprecated.  In new code, use the "guestfs_tar_in" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This command uploads and unpacks local file "tarball" (a gzip compressed tar file) into
       directory.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.3)

   guestfs_tgz_out
        int
        guestfs_tgz_out (guestfs_h *g,
                         const char *directory,
                         const char *tarball);

       This function is deprecated.  In new code, use the "guestfs_tar_out" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This command packs the contents of directory and downloads it to local file "tarball".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.3)

   guestfs_touch
        int
        guestfs_touch (guestfs_h *g,
                       const char *path);

       Touch acts like the touch(1) command.  It can be used to update the timestamps on a file,
       or, if the file does not exist, to create a new zero-length file.

       This command only works on regular files, and will fail on other file types such as
       directories, symbolic links, block special etc.

       This function returns 0 on success or -1 on error.

       (Added in 0.3)

   guestfs_truncate
        int
        guestfs_truncate (guestfs_h *g,
                          const char *path);

       This command truncates "path" to a zero-length file.  The file must exist already.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.77)

   guestfs_truncate_size
        int
        guestfs_truncate_size (guestfs_h *g,
                               const char *path,
                               int64_t size);

       This command truncates "path" to size "size" bytes.  The file must exist already.

       If the current file size is less than "size" then the file is extended to the required
       size with zero bytes.  This creates a sparse file (ie. disk blocks are not allocated for
       the file until you write to it).  To create a non-sparse file of zeroes, use
       "guestfs_fallocate64" instead.

       This function returns 0 on success or -1 on error.

       (Added in 1.0.77)

   guestfs_tune2fs
        int
        guestfs_tune2fs (guestfs_h *g,
                         const char *device,
                         ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_TUNE2FS_FORCE, int force,
        GUESTFS_TUNE2FS_MAXMOUNTCOUNT, int maxmountcount,
        GUESTFS_TUNE2FS_MOUNTCOUNT, int mountcount,
        GUESTFS_TUNE2FS_ERRORBEHAVIOR, const char *errorbehavior,
        GUESTFS_TUNE2FS_GROUP, int64_t group,
        GUESTFS_TUNE2FS_INTERVALBETWEENCHECKS, int intervalbetweenchecks,
        GUESTFS_TUNE2FS_RESERVEDBLOCKSPERCENTAGE, int reservedblockspercentage,
        GUESTFS_TUNE2FS_LASTMOUNTEDDIRECTORY, const char *lastmounteddirectory,
        GUESTFS_TUNE2FS_RESERVEDBLOCKSCOUNT, int64_t reservedblockscount,
        GUESTFS_TUNE2FS_USER, int64_t user,

       This call allows you to adjust various filesystem parameters of an ext2/ext3/ext4
       filesystem called "device".

       The optional parameters are:

       "force"
           Force tune2fs to complete the operation even in the face of errors.  This is the same
           as the tune2fs(8) "-f" option.

       "maxmountcount"
           Set the number of mounts after which the filesystem is checked by e2fsck(8).  If this
           is 0 then the number of mounts is disregarded.  This is the same as the tune2fs(8)
           "-c" option.

       "mountcount"
           Set the number of times the filesystem has been mounted.  This is the same as the
           tune2fs(8) "-C" option.

       "errorbehavior"
           Change the behavior of the kernel code when errors are detected.  Possible values
           currently are: "continue", "remount-ro", "panic".  In practice these options don't
           really make any difference, particularly for write errors.

           This is the same as the tune2fs(8) "-e" option.

       "group"
           Set the group which can use reserved filesystem blocks.  This is the same as the
           tune2fs(8) "-g" option except that it can only be specified as a number.

       "intervalbetweenchecks"
           Adjust the maximal time between two filesystem checks (in seconds).  If the option is
           passed as 0 then time-dependent checking is disabled.

           This is the same as the tune2fs(8) "-i" option.

       "reservedblockspercentage"
           Set the percentage of the filesystem which may only be allocated by privileged
           processes.  This is the same as the tune2fs(8) "-m" option.

       "lastmounteddirectory"
           Set the last mounted directory.  This is the same as the tune2fs(8) "-M" option.

       "reservedblockscount" Set the number of reserved filesystem blocks. This is the same as
       the tune2fs(8) "-r" option.
       "user"
           Set the user who can use the reserved filesystem blocks.  This is the same as the
           tune2fs(8) "-u" option except that it can only be specified as a number.

       To get the current values of filesystem parameters, see "guestfs_tune2fs_l".  For precise
       details of how tune2fs works, see the tune2fs(8) man page.

       This function returns 0 on success or -1 on error.

       (Added in 1.15.4)

   guestfs_tune2fs_va
        int
        guestfs_tune2fs_va (guestfs_h *g,
                            const char *device,
                            va_list args);

       This is the "va_list variant" of "guestfs_tune2fs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_tune2fs_argv
        int
        guestfs_tune2fs_argv (guestfs_h *g,
                              const char *device,
                              const struct guestfs_tune2fs_argv *optargs);

       This is the "argv variant" of "guestfs_tune2fs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_tune2fs_l
        char **
        guestfs_tune2fs_l (guestfs_h *g,
                           const char *device);

       This returns the contents of the ext2, ext3 or ext4 filesystem superblock on "device".

       It is the same as running "tune2fs -l device".  See tune2fs(8) manpage for more details.
       The list of fields returned isn't clearly defined, and depends on both the version of
       "tune2fs" that libguestfs was built against, and the filesystem itself.

       This function returns a NULL-terminated array of strings, or NULL if there was an error.
       The array of strings will always have length "2n+1", where "n" keys and values alternate,
       followed by the trailing NULL entry.  The caller must free the strings and the array after
       use.

       (Added in 1.9.2)

   guestfs_txz_in
        int
        guestfs_txz_in (guestfs_h *g,
                        const char *tarball,
                        const char *directory);

       This function is deprecated.  In new code, use the "guestfs_tar_in" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This command uploads and unpacks local file "tarball" (an xz compressed tar file) into
       directory.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "xz".  See also "guestfs_feature_available".

       (Added in 1.3.2)

   guestfs_txz_out
        int
        guestfs_txz_out (guestfs_h *g,
                         const char *directory,
                         const char *tarball);

       This function is deprecated.  In new code, use the "guestfs_tar_out" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This command packs the contents of directory and downloads it to local file "tarball" (as
       an xz compressed tar archive).

       This function returns 0 on success or -1 on error.

       This function depends on the feature "xz".  See also "guestfs_feature_available".

       (Added in 1.3.2)

   guestfs_umask
        int
        guestfs_umask (guestfs_h *g,
                       int mask);

       This function sets the mask used for creating new files and device nodes to "mask & 0777".

       Typical umask values would be 022 which creates new files with permissions like
       "-rw-r--r--" or "-rwxr-xr-x", and 002 which creates new files with permissions like
       "-rw-rw-r--" or "-rwxrwxr-x".

       The default umask is 022.  This is important because it means that directories and device
       nodes will be created with 0644 or 0755 mode even if you specify 0777.

       See also "guestfs_get_umask", umask(2), "guestfs_mknod", "guestfs_mkdir".

       This call returns the previous umask.

       On error this function returns -1.

       (Added in 1.0.55)

   guestfs_umount
        int
        guestfs_umount (guestfs_h *g,
                        const char *pathordevice);

       This function is provided for backwards compatibility with earlier versions of libguestfs.
       It simply calls "guestfs_umount_opts" with no optional arguments.

       (Added in 0.8)

   guestfs_umount_opts
        int
        guestfs_umount_opts (guestfs_h *g,
                             const char *pathordevice,
                             ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_UMOUNT_OPTS_FORCE, int force,
        GUESTFS_UMOUNT_OPTS_LAZYUNMOUNT, int lazyunmount,

       This unmounts the given filesystem.  The filesystem may be specified either by its
       mountpoint (path) or the device which contains the filesystem.

       This function returns 0 on success or -1 on error.

       (Added in 0.8)

   guestfs_umount_opts_va
        int
        guestfs_umount_opts_va (guestfs_h *g,
                                const char *pathordevice,
                                va_list args);

       This is the "va_list variant" of "guestfs_umount_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_umount_opts_argv
        int
        guestfs_umount_opts_argv (guestfs_h *g,
                                  const char *pathordevice,
                                  const struct guestfs_umount_opts_argv *optargs);

       This is the "argv variant" of "guestfs_umount_opts".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_umount_all
        int
        guestfs_umount_all (guestfs_h *g);

       This unmounts all mounted filesystems.

       Some internal mounts are not unmounted by this call.

       This function returns 0 on success or -1 on error.

       (Added in 0.8)

   guestfs_umount_local
        int
        guestfs_umount_local (guestfs_h *g,
                              ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_UMOUNT_LOCAL_RETRY, int retry,

       If libguestfs is exporting the filesystem on a local mountpoint, then this unmounts it.

       See "MOUNT LOCAL" for full documentation.

       This function returns 0 on success or -1 on error.

       (Added in 1.17.22)

   guestfs_umount_local_va
        int
        guestfs_umount_local_va (guestfs_h *g,
                                 va_list args);

       This is the "va_list variant" of "guestfs_umount_local".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_umount_local_argv
        int
        guestfs_umount_local_argv (guestfs_h *g,
                                   const struct guestfs_umount_local_argv *optargs);

       This is the "argv variant" of "guestfs_umount_local".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_upload
        int
        guestfs_upload (guestfs_h *g,
                        const char *filename,
                        const char *remotefilename);

       Upload local file filename to remotefilename on the filesystem.

       filename can also be a named pipe.

       See also "guestfs_download".

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.0.2)

   guestfs_upload_offset
        int
        guestfs_upload_offset (guestfs_h *g,
                               const char *filename,
                               const char *remotefilename,
                               int64_t offset);

       Upload local file filename to remotefilename on the filesystem.

       remotefilename is overwritten starting at the byte "offset" specified.  The intention is
       to overwrite parts of existing files or devices, although if a non-existent file is
       specified then it is created with a "hole" before "offset".  The size of the data written
       is implicit in the size of the source filename.

       Note that there is no limit on the amount of data that can be uploaded with this call,
       unlike with "guestfs_pwrite", and this call always writes the full amount unless an error
       occurs.

       See also "guestfs_upload", "guestfs_pwrite".

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.5.17)

   guestfs_user_cancel
        int
        guestfs_user_cancel (guestfs_h *g);

       This function cancels the current upload or download operation.

       Unlike most other libguestfs calls, this function is signal safe and thread safe.  You can
       call it from a signal handler or from another thread, without needing to do any locking.

       The transfer that was in progress (if there is one) will stop shortly afterwards, and will
       return an error.  The errno (see "guestfs_last_errno") is set to "EINTR", so you can test
       for this to find out if the operation was cancelled or failed because of another error.

       No cleanup is performed: for example, if a file was being uploaded then after cancellation
       there may be a partially uploaded file.  It is the caller’s responsibility to clean up if
       necessary.

       There are two common places that you might call "guestfs_user_cancel":

       In an interactive text-based program, you might call it from a "SIGINT" signal handler so
       that pressing "^C" cancels the current operation.  (You also need to call
       "guestfs_set_pgroup" so that child processes don't receive the "^C" signal).

       In a graphical program, when the main thread is displaying a progress bar with a cancel
       button, wire up the cancel button to call this function.

       This function returns 0 on success or -1 on error.

       (Added in 1.11.18)

   guestfs_utimens
        int
        guestfs_utimens (guestfs_h *g,
                         const char *path,
                         int64_t atsecs,
                         int64_t atnsecs,
                         int64_t mtsecs,
                         int64_t mtnsecs);

       This command sets the timestamps of a file with nanosecond precision.

       "atsecs", "atnsecs" are the last access time (atime) in secs and nanoseconds from the
       epoch.

       "mtsecs", "mtnsecs" are the last modification time (mtime) in secs and nanoseconds from
       the epoch.

       If the *nsecs field contains the special value "-1" then the corresponding timestamp is
       set to the current time.  (The *secs field is ignored in this case).

       If the *nsecs field contains the special value "-2" then the corresponding timestamp is
       left unchanged.  (The *secs field is ignored in this case).

       This function returns 0 on success or -1 on error.

       (Added in 1.0.77)

   guestfs_utsname
        struct guestfs_utsname *
        guestfs_utsname (guestfs_h *g);

       This returns the kernel version of the appliance, where this is available.  This
       information is only useful for debugging.  Nothing in the returned structure is defined by
       the API.

       This function returns a "struct guestfs_utsname *", or NULL if there was an error.  The
       caller must call "guestfs_free_utsname" after use.

       (Added in 1.19.27)

   guestfs_version
        struct guestfs_version *
        guestfs_version (guestfs_h *g);

       Return the libguestfs version number that the program is linked against.

       Note that because of dynamic linking this is not necessarily the version of libguestfs
       that you compiled against.  You can compile the program, and then at runtime dynamically
       link against a completely different libguestfs.so library.

       This call was added in version 1.0.58.  In previous versions of libguestfs there was no
       way to get the version number.  From C code you can use dynamic linker functions to find
       out if this symbol exists (if it doesn't, then it’s an earlier version).

       The call returns a structure with four elements.  The first three ("major", "minor" and
       "release") are numbers and correspond to the usual version triplet.  The fourth element
       ("extra") is a string and is normally empty, but may be used for distro-specific
       information.

       To construct the original version string: "$major.$minor.$release$extra"

       See also: "LIBGUESTFS VERSION NUMBERS".

       Note: Don't use this call to test for availability of features.  In enterprise
       distributions we backport features from later versions into earlier versions, making this
       an unreliable way to test for features.  Use "guestfs_available" or
       "guestfs_feature_available" instead.

       This function returns a "struct guestfs_version *", or NULL if there was an error.  The
       caller must call "guestfs_free_version" after use.

       (Added in 1.0.58)

   guestfs_vfs_label
        char *
        guestfs_vfs_label (guestfs_h *g,
                           const char *mountable);

       This returns the label of the filesystem on "mountable".

       If the filesystem is unlabeled, this returns the empty string.

       To find a filesystem from the label, use "guestfs_findfs_label".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.3.18)

   guestfs_vfs_minimum_size
        int64_t
        guestfs_vfs_minimum_size (guestfs_h *g,
                                  const char *mountable);

       Get the minimum size of filesystem in bytes.  This is the minimum possible size for
       filesystem shrinking.

       If getting minimum size of specified filesystem is not supported, this will fail and set
       errno as ENOTSUP.

       See also ntfsresize(8), resize2fs(8), btrfs(8), xfs_info(8).

       On error this function returns -1.

       (Added in 1.31.18)

   guestfs_vfs_type
        char *
        guestfs_vfs_type (guestfs_h *g,
                          const char *mountable);

       This command gets the filesystem type corresponding to the filesystem on "mountable".

       For most filesystems, the result is the name of the Linux VFS module which would be used
       to mount this filesystem if you mounted it without specifying the filesystem type.  For
       example a string such as "ext3" or "ntfs".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.75)

   guestfs_vfs_uuid
        char *
        guestfs_vfs_uuid (guestfs_h *g,
                          const char *mountable);

       This returns the filesystem UUID of the filesystem on "mountable".

       If the filesystem does not have a UUID, this returns the empty string.

       To find a filesystem from the UUID, use "guestfs_findfs_uuid".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.3.18)

   guestfs_vg_activate
        int
        guestfs_vg_activate (guestfs_h *g,
                             int activate,
                             char *const *volgroups);

       This command activates or (if "activate" is false) deactivates all logical volumes in the
       listed volume groups "volgroups".

       This command is the same as running "vgchange -a y|n volgroups..."

       Note that if "volgroups" is an empty list then all volume groups are activated or
       deactivated.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.0.26)

   guestfs_vg_activate_all
        int
        guestfs_vg_activate_all (guestfs_h *g,
                                 int activate);

       This command activates or (if "activate" is false) deactivates all logical volumes in all
       volume groups.

       This command is the same as running "vgchange -a y|n"

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.0.26)

   guestfs_vgchange_uuid
        int
        guestfs_vgchange_uuid (guestfs_h *g,
                               const char *vg);

       Generate a new random UUID for the volume group "vg".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.19.26)

   guestfs_vgchange_uuid_all
        int
        guestfs_vgchange_uuid_all (guestfs_h *g);

       Generate new random UUIDs for all volume groups.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.19.26)

   guestfs_vgcreate
        int
        guestfs_vgcreate (guestfs_h *g,
                          const char *volgroup,
                          char *const *physvols);

       This creates an LVM volume group called "volgroup" from the non-empty list of physical
       volumes "physvols".

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 0.8)

   guestfs_vglvuuids
        char **
        guestfs_vglvuuids (guestfs_h *g,
                           const char *vgname);

       Given a VG called "vgname", this returns the UUIDs of all the logical volumes created in
       this volume group.

       You can use this along with "guestfs_lvs" and "guestfs_lvuuid" calls to associate logical
       volumes and volume groups.

       See also "guestfs_vgpvuuids".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.0.87)

   guestfs_vgmeta
        char *
        guestfs_vgmeta (guestfs_h *g,
                        const char *vgname,
                        size_t *size_r);

       "vgname" is an LVM volume group.  This command examines the volume group and returns its
       metadata.

       Note that the metadata is an internal structure used by LVM, subject to change at any
       time, and is provided for information only.

       This function returns a buffer, or NULL on error.  The size of the returned buffer is
       written to *size_r.  The caller must free the returned buffer after use.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.17.20)

   guestfs_vgpvuuids
        char **
        guestfs_vgpvuuids (guestfs_h *g,
                           const char *vgname);

       Given a VG called "vgname", this returns the UUIDs of all the physical volumes that this
       volume group resides on.

       You can use this along with "guestfs_pvs" and "guestfs_pvuuid" calls to associate physical
       volumes and volume groups.

       See also "guestfs_vglvuuids".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       (Added in 1.0.87)

   guestfs_vgremove
        int
        guestfs_vgremove (guestfs_h *g,
                          const char *vgname);

       Remove an LVM volume group "vgname", (for example "VG").

       This also forcibly removes all logical volumes in the volume group (if any).

       This function returns 0 on success or -1 on error.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 1.0.13)

   guestfs_vgrename
        int
        guestfs_vgrename (guestfs_h *g,
                          const char *volgroup,
                          const char *newvolgroup);

       Rename a volume group "volgroup" with the new name "newvolgroup".

       This function returns 0 on success or -1 on error.

       (Added in 1.0.83)

   guestfs_vgs
        char **
        guestfs_vgs (guestfs_h *g);

       List all the volumes groups detected.  This is the equivalent of the vgs(8) command.

       This returns a list of just the volume group names that were detected (eg. "VolGroup00").

       See also "guestfs_vgs_full".

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 0.4)

   guestfs_vgs_full
        struct guestfs_lvm_vg_list *
        guestfs_vgs_full (guestfs_h *g);

       List all the volumes groups detected.  This is the equivalent of the vgs(8) command.  The
       "full" version includes all fields.

       This function returns a "struct guestfs_lvm_vg_list *", or NULL if there was an error.
       The caller must call "guestfs_free_lvm_vg_list" after use.

       This function depends on the feature "lvm2".  See also "guestfs_feature_available".

       (Added in 0.4)

   guestfs_vgscan
        int
        guestfs_vgscan (guestfs_h *g);

       This function is deprecated.  In new code, use the "guestfs_lvm_scan" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This rescans all block devices and rebuilds the list of LVM physical volumes, volume
       groups and logical volumes.

       This function returns 0 on success or -1 on error.

       (Added in 1.3.2)

   guestfs_vguuid
        char *
        guestfs_vguuid (guestfs_h *g,
                        const char *vgname);

       This command returns the UUID of the LVM VG named "vgname".

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.87)

   guestfs_wait_ready
        int
        guestfs_wait_ready (guestfs_h *g);

       This function is deprecated.  There is no replacement.  Consult the API documentation in
       guestfs(3) for further information.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This function is a no op.

       In versions of the API < 1.0.71 you had to call this function just after calling
       "guestfs_launch" to wait for the launch to complete.  However this is no longer necessary
       because "guestfs_launch" now does the waiting.

       If you see any calls to this function in code then you can just remove them, unless you
       want to retain compatibility with older versions of the API.

       This function returns 0 on success or -1 on error.

       (Added in 0.3)

   guestfs_wc_c
        int
        guestfs_wc_c (guestfs_h *g,
                      const char *path);

       This command counts the characters in a file, using the "wc -c" external command.

       On error this function returns -1.

       (Added in 1.0.54)

   guestfs_wc_l
        int
        guestfs_wc_l (guestfs_h *g,
                      const char *path);

       This command counts the lines in a file, using the "wc -l" external command.

       On error this function returns -1.

       (Added in 1.0.54)

   guestfs_wc_w
        int
        guestfs_wc_w (guestfs_h *g,
                      const char *path);

       This command counts the words in a file, using the "wc -w" external command.

       On error this function returns -1.

       (Added in 1.0.54)

   guestfs_wipefs
        int
        guestfs_wipefs (guestfs_h *g,
                        const char *device);

       This command erases filesystem or RAID signatures from the specified "device" to make the
       filesystem invisible to libblkid.

       This does not erase the filesystem itself nor any other data from the "device".

       Compare with "guestfs_zero" which zeroes the first few blocks of a device.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "wipefs".  See also "guestfs_feature_available".

       (Added in 1.17.6)

   guestfs_write
        int
        guestfs_write (guestfs_h *g,
                       const char *path,
                       const char *content,
                       size_t content_size);

       This call creates a file called "path".  The content of the file is the string "content"
       (which can contain any 8 bit data).

       See also "guestfs_write_append".

       This function returns 0 on success or -1 on error.

       (Added in 1.3.14)

   guestfs_write_append
        int
        guestfs_write_append (guestfs_h *g,
                              const char *path,
                              const char *content,
                              size_t content_size);

       This call appends "content" to the end of file "path".  If "path" does not exist, then a
       new file is created.

       See also "guestfs_write".

       This function returns 0 on success or -1 on error.

       (Added in 1.11.18)

   guestfs_write_file
        int
        guestfs_write_file (guestfs_h *g,
                            const char *path,
                            const char *content,
                            int size);

       This function is deprecated.  In new code, use the "guestfs_write" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This call creates a file called "path".  The contents of the file is the string "content"
       (which can contain any 8 bit data), with length "size".

       As a special case, if "size" is 0 then the length is calculated using "strlen" (so in this
       case the content cannot contain embedded ASCII NULs).

       NB. Owing to a bug, writing content containing ASCII NUL characters does not work, even if
       the length is specified.

       This function returns 0 on success or -1 on error.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 0.8)

   guestfs_xfs_admin
        int
        guestfs_xfs_admin (guestfs_h *g,
                           const char *device,
                           ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_XFS_ADMIN_EXTUNWRITTEN, int extunwritten,
        GUESTFS_XFS_ADMIN_IMGFILE, int imgfile,
        GUESTFS_XFS_ADMIN_V2LOG, int v2log,
        GUESTFS_XFS_ADMIN_PROJID32BIT, int projid32bit,
        GUESTFS_XFS_ADMIN_LAZYCOUNTER, int lazycounter,
        GUESTFS_XFS_ADMIN_LABEL, const char *label,
        GUESTFS_XFS_ADMIN_UUID, const char *uuid,

       Change the parameters of the XFS filesystem on "device".

       Devices that are mounted cannot be modified.  Administrators must unmount filesystems
       before this call can modify parameters.

       Some of the parameters of a mounted filesystem can be examined and modified using the
       "guestfs_xfs_info" and "guestfs_xfs_growfs" calls.

       Beginning with XFS version 5, it is no longer possible to modify the lazy-counters setting
       (ie. "lazycounter" parameter has no effect).

       This function returns 0 on success or -1 on error.

       This function depends on the feature "xfs".  See also "guestfs_feature_available".

       (Added in 1.19.33)

   guestfs_xfs_admin_va
        int
        guestfs_xfs_admin_va (guestfs_h *g,
                              const char *device,
                              va_list args);

       This is the "va_list variant" of "guestfs_xfs_admin".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_xfs_admin_argv
        int
        guestfs_xfs_admin_argv (guestfs_h *g,
                                const char *device,
                                const struct guestfs_xfs_admin_argv *optargs);

       This is the "argv variant" of "guestfs_xfs_admin".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_xfs_growfs
        int
        guestfs_xfs_growfs (guestfs_h *g,
                            const char *path,
                            ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_XFS_GROWFS_DATASEC, int datasec,
        GUESTFS_XFS_GROWFS_LOGSEC, int logsec,
        GUESTFS_XFS_GROWFS_RTSEC, int rtsec,
        GUESTFS_XFS_GROWFS_DATASIZE, int64_t datasize,
        GUESTFS_XFS_GROWFS_LOGSIZE, int64_t logsize,
        GUESTFS_XFS_GROWFS_RTSIZE, int64_t rtsize,
        GUESTFS_XFS_GROWFS_RTEXTSIZE, int64_t rtextsize,
        GUESTFS_XFS_GROWFS_MAXPCT, int maxpct,

       Grow the XFS filesystem mounted at "path".

       The returned struct contains geometry information.  Missing fields are returned as "-1"
       (for numeric fields) or empty string.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "xfs".  See also "guestfs_feature_available".

       (Added in 1.19.28)

   guestfs_xfs_growfs_va
        int
        guestfs_xfs_growfs_va (guestfs_h *g,
                               const char *path,
                               va_list args);

       This is the "va_list variant" of "guestfs_xfs_growfs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_xfs_growfs_argv
        int
        guestfs_xfs_growfs_argv (guestfs_h *g,
                                 const char *path,
                                 const struct guestfs_xfs_growfs_argv *optargs);

       This is the "argv variant" of "guestfs_xfs_growfs".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_xfs_info
        struct guestfs_xfsinfo *
        guestfs_xfs_info (guestfs_h *g,
                          const char *pathordevice);

       "pathordevice" is a mounted XFS filesystem or a device containing an XFS filesystem.  This
       command returns the geometry of the filesystem.

       The returned struct contains geometry information.  Missing fields are returned as "-1"
       (for numeric fields) or empty string.

       This function returns a "struct guestfs_xfsinfo *", or NULL if there was an error.  The
       caller must call "guestfs_free_xfsinfo" after use.

       This function depends on the feature "xfs".  See also "guestfs_feature_available".

       (Added in 1.19.21)

   guestfs_xfs_repair
        int
        guestfs_xfs_repair (guestfs_h *g,
                            const char *device,
                            ...);

       You may supply a list of optional arguments to this call.  Use zero or more of the
       following pairs of parameters, and terminate the list with "-1" on its own.  See "CALLS
       WITH OPTIONAL ARGUMENTS".

        GUESTFS_XFS_REPAIR_FORCELOGZERO, int forcelogzero,
        GUESTFS_XFS_REPAIR_NOMODIFY, int nomodify,
        GUESTFS_XFS_REPAIR_NOPREFETCH, int noprefetch,
        GUESTFS_XFS_REPAIR_FORCEGEOMETRY, int forcegeometry,
        GUESTFS_XFS_REPAIR_MAXMEM, int64_t maxmem,
        GUESTFS_XFS_REPAIR_IHASHSIZE, int64_t ihashsize,
        GUESTFS_XFS_REPAIR_BHASHSIZE, int64_t bhashsize,
        GUESTFS_XFS_REPAIR_AGSTRIDE, int64_t agstride,
        GUESTFS_XFS_REPAIR_LOGDEV, const char *logdev,
        GUESTFS_XFS_REPAIR_RTDEV, const char *rtdev,

       Repair corrupt or damaged XFS filesystem on "device".

       The filesystem is specified using the "device" argument which should be the device name of
       the disk partition or volume containing the filesystem.  If given the name of a block
       device, "xfs_repair" will attempt to find the raw device associated with the specified
       block device and will use the raw device instead.

       Regardless, the filesystem to be repaired must be unmounted, otherwise, the resulting
       filesystem may be inconsistent or corrupt.

       The returned status indicates whether filesystem corruption was detected (returns 1) or
       was not detected (returns 0).

       On error this function returns -1.

       This function depends on the feature "xfs".  See also "guestfs_feature_available".

       (Added in 1.19.36)

   guestfs_xfs_repair_va
        int
        guestfs_xfs_repair_va (guestfs_h *g,
                               const char *device,
                               va_list args);

       This is the "va_list variant" of "guestfs_xfs_repair".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_xfs_repair_argv
        int
        guestfs_xfs_repair_argv (guestfs_h *g,
                                 const char *device,
                                 const struct guestfs_xfs_repair_argv *optargs);

       This is the "argv variant" of "guestfs_xfs_repair".

       See "CALLS WITH OPTIONAL ARGUMENTS".

   guestfs_yara_destroy
        int
        guestfs_yara_destroy (guestfs_h *g);

       Destroy previously loaded Yara rules in order to free libguestfs resources.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "libyara".  See also "guestfs_feature_available".

       (Added in 1.37.13)

   guestfs_yara_load
        int
        guestfs_yara_load (guestfs_h *g,
                           const char *filename);

       Upload a set of Yara rules from local file filename.

       Yara rules allow to categorize files based on textual or binary patterns within their
       content.  See "guestfs_yara_scan" to see how to scan files with the loaded rules.

       Rules can be in binary format, as when compiled with yarac command, or in source code
       format. In the latter case, the rules will be first compiled and then loaded.

       Rules in source code format cannot include external files. In such cases, it is
       recommended to compile them first.

       Previously loaded rules will be destroyed.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       This function depends on the feature "libyara".  See also "guestfs_feature_available".

       (Added in 1.37.13)

   guestfs_yara_scan
        struct guestfs_yara_detection_list *
        guestfs_yara_scan (guestfs_h *g,
                           const char *path);

       Scan a file with the previously loaded Yara rules.

       For each matching rule, a "yara_detection" structure is returned.

       The "yara_detection" structure contains the following fields.

       "yara_name"
           Path of the file matching a Yara rule.

       "yara_rule"
           Identifier of the Yara rule which matched against the given file.

       This function returns a "struct guestfs_yara_detection_list *", or NULL if there was an
       error.  The caller must call "guestfs_free_yara_detection_list" after use.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       This function depends on the feature "libyara".  See also "guestfs_feature_available".

       (Added in 1.37.13)

   guestfs_zegrep
        char **
        guestfs_zegrep (guestfs_h *g,
                        const char *regex,
                        const char *path);

       This function is deprecated.  In new code, use the "guestfs_grep" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls the external "zegrep" program and returns the matching lines.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

   guestfs_zegrepi
        char **
        guestfs_zegrepi (guestfs_h *g,
                         const char *regex,
                         const char *path);

       This function is deprecated.  In new code, use the "guestfs_grep" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls the external "zegrep -i" program and returns the matching lines.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

   guestfs_zero
        int
        guestfs_zero (guestfs_h *g,
                      const char *device);

       This command writes zeroes over the first few blocks of "device".

       How many blocks are zeroed isn't specified (but it’s not enough to securely wipe the
       device).  It should be sufficient to remove any partition tables, filesystem superblocks
       and so on.

       If blocks are already zero, then this command avoids writing zeroes.  This prevents the
       underlying device from becoming non-sparse or growing unnecessarily.

       See also: "guestfs_zero_device", "guestfs_scrub_device", "guestfs_is_zero_device"

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.0.16)

   guestfs_zero_device
        int
        guestfs_zero_device (guestfs_h *g,
                             const char *device);

       This command writes zeroes over the entire "device".  Compare with "guestfs_zero" which
       just zeroes the first few blocks of a device.

       If blocks are already zero, then this command avoids writing zeroes.  This prevents the
       underlying device from becoming non-sparse or growing unnecessarily.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.3.1)

   guestfs_zero_free_space
        int
        guestfs_zero_free_space (guestfs_h *g,
                                 const char *directory);

       Zero the free space in the filesystem mounted on directory.  The filesystem must be
       mounted read-write.

       The filesystem contents are not affected, but any free space in the filesystem is freed.

       Free space is not "trimmed".  You may want to call "guestfs_fstrim" either as an
       alternative to this, or after calling this, depending on your requirements.

       This function returns 0 on success or -1 on error.

       This long-running command can generate progress notification messages so that the caller
       can display a progress bar or indicator.  To receive these messages, the caller must
       register a progress event callback.  See "GUESTFS_EVENT_PROGRESS".

       (Added in 1.17.18)

   guestfs_zerofree
        int
        guestfs_zerofree (guestfs_h *g,
                          const char *device);

       This runs the zerofree program on "device".  This program claims to zero unused inodes and
       disk blocks on an ext2/3 filesystem, thus making it possible to compress the filesystem
       more effectively.

       You should not run this program if the filesystem is mounted.

       It is possible that using this program can damage the filesystem or data on the
       filesystem.

       This function returns 0 on success or -1 on error.

       This function depends on the feature "zerofree".  See also "guestfs_feature_available".

       (Added in 1.0.26)

   guestfs_zfgrep
        char **
        guestfs_zfgrep (guestfs_h *g,
                        const char *pattern,
                        const char *path);

       This function is deprecated.  In new code, use the "guestfs_grep" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls the external "zfgrep" program and returns the matching lines.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

   guestfs_zfgrepi
        char **
        guestfs_zfgrepi (guestfs_h *g,
                         const char *pattern,
                         const char *path);

       This function is deprecated.  In new code, use the "guestfs_grep" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls the external "zfgrep -i" program and returns the matching lines.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

   guestfs_zfile
        char *
        guestfs_zfile (guestfs_h *g,
                       const char *meth,
                       const char *path);

       This function is deprecated.  In new code, use the "guestfs_file" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This command runs file(1) after first decompressing "path" using "meth".

       "meth" must be one of "gzip", "compress" or "bzip2".

       Since 1.0.63, use "guestfs_file" instead which can now process compressed files.

       This function returns a string, or NULL on error.  The caller must free the returned
       string after use.

       (Added in 1.0.59)

   guestfs_zgrep
        char **
        guestfs_zgrep (guestfs_h *g,
                       const char *regex,
                       const char *path);

       This function is deprecated.  In new code, use the "guestfs_grep" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls the external zgrep(1) program and returns the matching lines.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

   guestfs_zgrepi
        char **
        guestfs_zgrepi (guestfs_h *g,
                        const char *regex,
                        const char *path);

       This function is deprecated.  In new code, use the "guestfs_grep" call instead.

       Deprecated functions will not be removed from the API, but the fact that they are
       deprecated indicates that there are problems with correct use of these functions.

       This calls the external "zgrep -i" program and returns the matching lines.

       This function returns a NULL-terminated array of strings (like environ(3)), or NULL if
       there was an error.  The caller must free the strings and the array after use.

       Because of the message protocol, there is a transfer limit of somewhere between 2MB and
       4MB.  See "PROTOCOL LIMITS".

       (Added in 1.0.66)

STRUCTURES

   guestfs_int_bool
        struct guestfs_int_bool {
          int32_t i;
          int32_t b;
        };

        struct guestfs_int_bool_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_int_bool *val; /* Elements. */
        };

        int guestfs_compare_int_bool (const struct guestfs_int_bool *, const struct guestfs_int_bool *);
        int guestfs_compare_int_bool_list (const struct guestfs_int_bool_list *, const struct guestfs_int_bool_list *);

        struct guestfs_int_bool *guestfs_copy_int_bool (const struct guestfs_int_bool *);
        struct guestfs_int_bool_list *guestfs_copy_int_bool_list (const struct guestfs_int_bool_list *);

        void guestfs_free_int_bool (struct guestfs_int_bool *);
        void guestfs_free_int_bool_list (struct guestfs_int_bool_list *);

   guestfs_lvm_pv
        struct guestfs_lvm_pv {
          char *pv_name;
          /* The next field is NOT nul-terminated, be careful when printing it: */
          char pv_uuid[32];
          char *pv_fmt;
          uint64_t pv_size;
          uint64_t dev_size;
          uint64_t pv_free;
          uint64_t pv_used;
          char *pv_attr;
          int64_t pv_pe_count;
          int64_t pv_pe_alloc_count;
          char *pv_tags;
          uint64_t pe_start;
          int64_t pv_mda_count;
          uint64_t pv_mda_free;
        };

        struct guestfs_lvm_pv_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_lvm_pv *val; /* Elements. */
        };

        int guestfs_compare_lvm_pv (const struct guestfs_lvm_pv *, const struct guestfs_lvm_pv *);
        int guestfs_compare_lvm_pv_list (const struct guestfs_lvm_pv_list *, const struct guestfs_lvm_pv_list *);

        struct guestfs_lvm_pv *guestfs_copy_lvm_pv (const struct guestfs_lvm_pv *);
        struct guestfs_lvm_pv_list *guestfs_copy_lvm_pv_list (const struct guestfs_lvm_pv_list *);

        void guestfs_free_lvm_pv (struct guestfs_lvm_pv *);
        void guestfs_free_lvm_pv_list (struct guestfs_lvm_pv_list *);

   guestfs_lvm_vg
        struct guestfs_lvm_vg {
          char *vg_name;
          /* The next field is NOT nul-terminated, be careful when printing it: */
          char vg_uuid[32];
          char *vg_fmt;
          char *vg_attr;
          uint64_t vg_size;
          uint64_t vg_free;
          char *vg_sysid;
          uint64_t vg_extent_size;
          int64_t vg_extent_count;
          int64_t vg_free_count;
          int64_t max_lv;
          int64_t max_pv;
          int64_t pv_count;
          int64_t lv_count;
          int64_t snap_count;
          int64_t vg_seqno;
          char *vg_tags;
          int64_t vg_mda_count;
          uint64_t vg_mda_free;
        };

        struct guestfs_lvm_vg_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_lvm_vg *val; /* Elements. */
        };

        int guestfs_compare_lvm_vg (const struct guestfs_lvm_vg *, const struct guestfs_lvm_vg *);
        int guestfs_compare_lvm_vg_list (const struct guestfs_lvm_vg_list *, const struct guestfs_lvm_vg_list *);

        struct guestfs_lvm_vg *guestfs_copy_lvm_vg (const struct guestfs_lvm_vg *);
        struct guestfs_lvm_vg_list *guestfs_copy_lvm_vg_list (const struct guestfs_lvm_vg_list *);

        void guestfs_free_lvm_vg (struct guestfs_lvm_vg *);
        void guestfs_free_lvm_vg_list (struct guestfs_lvm_vg_list *);

   guestfs_lvm_lv
        struct guestfs_lvm_lv {
          char *lv_name;
          /* The next field is NOT nul-terminated, be careful when printing it: */
          char lv_uuid[32];
          char *lv_attr;
          int64_t lv_major;
          int64_t lv_minor;
          int64_t lv_kernel_major;
          int64_t lv_kernel_minor;
          uint64_t lv_size;
          int64_t seg_count;
          char *origin;
          /* The next field is [0..100] or -1 meaning 'not present': */
          float snap_percent;
          /* The next field is [0..100] or -1 meaning 'not present': */
          float copy_percent;
          char *move_pv;
          char *lv_tags;
          char *mirror_log;
          char *modules;
        };

        struct guestfs_lvm_lv_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_lvm_lv *val; /* Elements. */
        };

        int guestfs_compare_lvm_lv (const struct guestfs_lvm_lv *, const struct guestfs_lvm_lv *);
        int guestfs_compare_lvm_lv_list (const struct guestfs_lvm_lv_list *, const struct guestfs_lvm_lv_list *);

        struct guestfs_lvm_lv *guestfs_copy_lvm_lv (const struct guestfs_lvm_lv *);
        struct guestfs_lvm_lv_list *guestfs_copy_lvm_lv_list (const struct guestfs_lvm_lv_list *);

        void guestfs_free_lvm_lv (struct guestfs_lvm_lv *);
        void guestfs_free_lvm_lv_list (struct guestfs_lvm_lv_list *);

   guestfs_stat
        struct guestfs_stat {
          int64_t dev;
          int64_t ino;
          int64_t mode;
          int64_t nlink;
          int64_t uid;
          int64_t gid;
          int64_t rdev;
          int64_t size;
          int64_t blksize;
          int64_t blocks;
          int64_t atime;
          int64_t mtime;
          int64_t ctime;
        };

        struct guestfs_stat_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_stat *val; /* Elements. */
        };

        int guestfs_compare_stat (const struct guestfs_stat *, const struct guestfs_stat *);
        int guestfs_compare_stat_list (const struct guestfs_stat_list *, const struct guestfs_stat_list *);

        struct guestfs_stat *guestfs_copy_stat (const struct guestfs_stat *);
        struct guestfs_stat_list *guestfs_copy_stat_list (const struct guestfs_stat_list *);

        void guestfs_free_stat (struct guestfs_stat *);
        void guestfs_free_stat_list (struct guestfs_stat_list *);

   guestfs_statns
        struct guestfs_statns {
          int64_t st_dev;
          int64_t st_ino;
          int64_t st_mode;
          int64_t st_nlink;
          int64_t st_uid;
          int64_t st_gid;
          int64_t st_rdev;
          int64_t st_size;
          int64_t st_blksize;
          int64_t st_blocks;
          int64_t st_atime_sec;
          int64_t st_atime_nsec;
          int64_t st_mtime_sec;
          int64_t st_mtime_nsec;
          int64_t st_ctime_sec;
          int64_t st_ctime_nsec;
          int64_t st_spare1;
          int64_t st_spare2;
          int64_t st_spare3;
          int64_t st_spare4;
          int64_t st_spare5;
          int64_t st_spare6;
        };

        struct guestfs_statns_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_statns *val; /* Elements. */
        };

        int guestfs_compare_statns (const struct guestfs_statns *, const struct guestfs_statns *);
        int guestfs_compare_statns_list (const struct guestfs_statns_list *, const struct guestfs_statns_list *);

        struct guestfs_statns *guestfs_copy_statns (const struct guestfs_statns *);
        struct guestfs_statns_list *guestfs_copy_statns_list (const struct guestfs_statns_list *);

        void guestfs_free_statns (struct guestfs_statns *);
        void guestfs_free_statns_list (struct guestfs_statns_list *);

   guestfs_statvfs
        struct guestfs_statvfs {
          int64_t bsize;
          int64_t frsize;
          int64_t blocks;
          int64_t bfree;
          int64_t bavail;
          int64_t files;
          int64_t ffree;
          int64_t favail;
          int64_t fsid;
          int64_t flag;
          int64_t namemax;
        };

        struct guestfs_statvfs_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_statvfs *val; /* Elements. */
        };

        int guestfs_compare_statvfs (const struct guestfs_statvfs *, const struct guestfs_statvfs *);
        int guestfs_compare_statvfs_list (const struct guestfs_statvfs_list *, const struct guestfs_statvfs_list *);

        struct guestfs_statvfs *guestfs_copy_statvfs (const struct guestfs_statvfs *);
        struct guestfs_statvfs_list *guestfs_copy_statvfs_list (const struct guestfs_statvfs_list *);

        void guestfs_free_statvfs (struct guestfs_statvfs *);
        void guestfs_free_statvfs_list (struct guestfs_statvfs_list *);

   guestfs_dirent
        struct guestfs_dirent {
          int64_t ino;
          char ftyp;
          char *name;
        };

        struct guestfs_dirent_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_dirent *val; /* Elements. */
        };

        int guestfs_compare_dirent (const struct guestfs_dirent *, const struct guestfs_dirent *);
        int guestfs_compare_dirent_list (const struct guestfs_dirent_list *, const struct guestfs_dirent_list *);

        struct guestfs_dirent *guestfs_copy_dirent (const struct guestfs_dirent *);
        struct guestfs_dirent_list *guestfs_copy_dirent_list (const struct guestfs_dirent_list *);

        void guestfs_free_dirent (struct guestfs_dirent *);
        void guestfs_free_dirent_list (struct guestfs_dirent_list *);

   guestfs_version
        struct guestfs_version {
          int64_t major;
          int64_t minor;
          int64_t release;
          char *extra;
        };

        struct guestfs_version_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_version *val; /* Elements. */
        };

        int guestfs_compare_version (const struct guestfs_version *, const struct guestfs_version *);
        int guestfs_compare_version_list (const struct guestfs_version_list *, const struct guestfs_version_list *);

        struct guestfs_version *guestfs_copy_version (const struct guestfs_version *);
        struct guestfs_version_list *guestfs_copy_version_list (const struct guestfs_version_list *);

        void guestfs_free_version (struct guestfs_version *);
        void guestfs_free_version_list (struct guestfs_version_list *);

   guestfs_xattr
        struct guestfs_xattr {
          char *attrname;
          /* The next two fields describe a byte array. */
          uint32_t attrval_len;
          char *attrval;
        };

        struct guestfs_xattr_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_xattr *val; /* Elements. */
        };

        int guestfs_compare_xattr (const struct guestfs_xattr *, const struct guestfs_xattr *);
        int guestfs_compare_xattr_list (const struct guestfs_xattr_list *, const struct guestfs_xattr_list *);

        struct guestfs_xattr *guestfs_copy_xattr (const struct guestfs_xattr *);
        struct guestfs_xattr_list *guestfs_copy_xattr_list (const struct guestfs_xattr_list *);

        void guestfs_free_xattr (struct guestfs_xattr *);
        void guestfs_free_xattr_list (struct guestfs_xattr_list *);

   guestfs_inotify_event
        struct guestfs_inotify_event {
          int64_t in_wd;
          uint32_t in_mask;
          uint32_t in_cookie;
          char *in_name;
        };

        struct guestfs_inotify_event_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_inotify_event *val; /* Elements. */
        };

        int guestfs_compare_inotify_event (const struct guestfs_inotify_event *, const struct guestfs_inotify_event *);
        int guestfs_compare_inotify_event_list (const struct guestfs_inotify_event_list *, const struct guestfs_inotify_event_list *);

        struct guestfs_inotify_event *guestfs_copy_inotify_event (const struct guestfs_inotify_event *);
        struct guestfs_inotify_event_list *guestfs_copy_inotify_event_list (const struct guestfs_inotify_event_list *);

        void guestfs_free_inotify_event (struct guestfs_inotify_event *);
        void guestfs_free_inotify_event_list (struct guestfs_inotify_event_list *);

   guestfs_partition
        struct guestfs_partition {
          int32_t part_num;
          uint64_t part_start;
          uint64_t part_end;
          uint64_t part_size;
        };

        struct guestfs_partition_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_partition *val; /* Elements. */
        };

        int guestfs_compare_partition (const struct guestfs_partition *, const struct guestfs_partition *);
        int guestfs_compare_partition_list (const struct guestfs_partition_list *, const struct guestfs_partition_list *);

        struct guestfs_partition *guestfs_copy_partition (const struct guestfs_partition *);
        struct guestfs_partition_list *guestfs_copy_partition_list (const struct guestfs_partition_list *);

        void guestfs_free_partition (struct guestfs_partition *);
        void guestfs_free_partition_list (struct guestfs_partition_list *);

   guestfs_application
        struct guestfs_application {
          char *app_name;
          char *app_display_name;
          int32_t app_epoch;
          char *app_version;
          char *app_release;
          char *app_install_path;
          char *app_trans_path;
          char *app_publisher;
          char *app_url;
          char *app_source_package;
          char *app_summary;
          char *app_description;
        };

        struct guestfs_application_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_application *val; /* Elements. */
        };

        int guestfs_compare_application (const struct guestfs_application *, const struct guestfs_application *);
        int guestfs_compare_application_list (const struct guestfs_application_list *, const struct guestfs_application_list *);

        struct guestfs_application *guestfs_copy_application (const struct guestfs_application *);
        struct guestfs_application_list *guestfs_copy_application_list (const struct guestfs_application_list *);

        void guestfs_free_application (struct guestfs_application *);
        void guestfs_free_application_list (struct guestfs_application_list *);

   guestfs_application2
        struct guestfs_application2 {
          char *app2_name;
          char *app2_display_name;
          int32_t app2_epoch;
          char *app2_version;
          char *app2_release;
          char *app2_arch;
          char *app2_install_path;
          char *app2_trans_path;
          char *app2_publisher;
          char *app2_url;
          char *app2_source_package;
          char *app2_summary;
          char *app2_description;
          char *app2_spare1;
          char *app2_spare2;
          char *app2_spare3;
          char *app2_spare4;
        };

        struct guestfs_application2_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_application2 *val; /* Elements. */
        };

        int guestfs_compare_application2 (const struct guestfs_application2 *, const struct guestfs_application2 *);
        int guestfs_compare_application2_list (const struct guestfs_application2_list *, const struct guestfs_application2_list *);

        struct guestfs_application2 *guestfs_copy_application2 (const struct guestfs_application2 *);
        struct guestfs_application2_list *guestfs_copy_application2_list (const struct guestfs_application2_list *);

        void guestfs_free_application2 (struct guestfs_application2 *);
        void guestfs_free_application2_list (struct guestfs_application2_list *);

   guestfs_isoinfo
        struct guestfs_isoinfo {
          char *iso_system_id;
          char *iso_volume_id;
          uint32_t iso_volume_space_size;
          uint32_t iso_volume_set_size;
          uint32_t iso_volume_sequence_number;
          uint32_t iso_logical_block_size;
          char *iso_volume_set_id;
          char *iso_publisher_id;
          char *iso_data_preparer_id;
          char *iso_application_id;
          char *iso_copyright_file_id;
          char *iso_abstract_file_id;
          char *iso_bibliographic_file_id;
          int64_t iso_volume_creation_t;
          int64_t iso_volume_modification_t;
          int64_t iso_volume_expiration_t;
          int64_t iso_volume_effective_t;
        };

        struct guestfs_isoinfo_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_isoinfo *val; /* Elements. */
        };

        int guestfs_compare_isoinfo (const struct guestfs_isoinfo *, const struct guestfs_isoinfo *);
        int guestfs_compare_isoinfo_list (const struct guestfs_isoinfo_list *, const struct guestfs_isoinfo_list *);

        struct guestfs_isoinfo *guestfs_copy_isoinfo (const struct guestfs_isoinfo *);
        struct guestfs_isoinfo_list *guestfs_copy_isoinfo_list (const struct guestfs_isoinfo_list *);

        void guestfs_free_isoinfo (struct guestfs_isoinfo *);
        void guestfs_free_isoinfo_list (struct guestfs_isoinfo_list *);

   guestfs_mdstat
        struct guestfs_mdstat {
          char *mdstat_device;
          int32_t mdstat_index;
          char *mdstat_flags;
        };

        struct guestfs_mdstat_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_mdstat *val; /* Elements. */
        };

        int guestfs_compare_mdstat (const struct guestfs_mdstat *, const struct guestfs_mdstat *);
        int guestfs_compare_mdstat_list (const struct guestfs_mdstat_list *, const struct guestfs_mdstat_list *);

        struct guestfs_mdstat *guestfs_copy_mdstat (const struct guestfs_mdstat *);
        struct guestfs_mdstat_list *guestfs_copy_mdstat_list (const struct guestfs_mdstat_list *);

        void guestfs_free_mdstat (struct guestfs_mdstat *);
        void guestfs_free_mdstat_list (struct guestfs_mdstat_list *);

   guestfs_btrfssubvolume
        struct guestfs_btrfssubvolume {
          uint64_t btrfssubvolume_id;
          uint64_t btrfssubvolume_top_level_id;
          char *btrfssubvolume_path;
        };

        struct guestfs_btrfssubvolume_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_btrfssubvolume *val; /* Elements. */
        };

        int guestfs_compare_btrfssubvolume (const struct guestfs_btrfssubvolume *, const struct guestfs_btrfssubvolume *);
        int guestfs_compare_btrfssubvolume_list (const struct guestfs_btrfssubvolume_list *, const struct guestfs_btrfssubvolume_list *);

        struct guestfs_btrfssubvolume *guestfs_copy_btrfssubvolume (const struct guestfs_btrfssubvolume *);
        struct guestfs_btrfssubvolume_list *guestfs_copy_btrfssubvolume_list (const struct guestfs_btrfssubvolume_list *);

        void guestfs_free_btrfssubvolume (struct guestfs_btrfssubvolume *);
        void guestfs_free_btrfssubvolume_list (struct guestfs_btrfssubvolume_list *);

   guestfs_btrfsqgroup
        struct guestfs_btrfsqgroup {
          char *btrfsqgroup_id;
          uint64_t btrfsqgroup_rfer;
          uint64_t btrfsqgroup_excl;
        };

        struct guestfs_btrfsqgroup_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_btrfsqgroup *val; /* Elements. */
        };

        int guestfs_compare_btrfsqgroup (const struct guestfs_btrfsqgroup *, const struct guestfs_btrfsqgroup *);
        int guestfs_compare_btrfsqgroup_list (const struct guestfs_btrfsqgroup_list *, const struct guestfs_btrfsqgroup_list *);

        struct guestfs_btrfsqgroup *guestfs_copy_btrfsqgroup (const struct guestfs_btrfsqgroup *);
        struct guestfs_btrfsqgroup_list *guestfs_copy_btrfsqgroup_list (const struct guestfs_btrfsqgroup_list *);

        void guestfs_free_btrfsqgroup (struct guestfs_btrfsqgroup *);
        void guestfs_free_btrfsqgroup_list (struct guestfs_btrfsqgroup_list *);

   guestfs_btrfsbalance
        struct guestfs_btrfsbalance {
          char *btrfsbalance_status;
          uint64_t btrfsbalance_total;
          uint64_t btrfsbalance_balanced;
          uint64_t btrfsbalance_considered;
          uint64_t btrfsbalance_left;
        };

        struct guestfs_btrfsbalance_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_btrfsbalance *val; /* Elements. */
        };

        int guestfs_compare_btrfsbalance (const struct guestfs_btrfsbalance *, const struct guestfs_btrfsbalance *);
        int guestfs_compare_btrfsbalance_list (const struct guestfs_btrfsbalance_list *, const struct guestfs_btrfsbalance_list *);

        struct guestfs_btrfsbalance *guestfs_copy_btrfsbalance (const struct guestfs_btrfsbalance *);
        struct guestfs_btrfsbalance_list *guestfs_copy_btrfsbalance_list (const struct guestfs_btrfsbalance_list *);

        void guestfs_free_btrfsbalance (struct guestfs_btrfsbalance *);
        void guestfs_free_btrfsbalance_list (struct guestfs_btrfsbalance_list *);

   guestfs_btrfsscrub
        struct guestfs_btrfsscrub {
          uint64_t btrfsscrub_data_extents_scrubbed;
          uint64_t btrfsscrub_tree_extents_scrubbed;
          uint64_t btrfsscrub_data_bytes_scrubbed;
          uint64_t btrfsscrub_tree_bytes_scrubbed;
          uint64_t btrfsscrub_read_errors;
          uint64_t btrfsscrub_csum_errors;
          uint64_t btrfsscrub_verify_errors;
          uint64_t btrfsscrub_no_csum;
          uint64_t btrfsscrub_csum_discards;
          uint64_t btrfsscrub_super_errors;
          uint64_t btrfsscrub_malloc_errors;
          uint64_t btrfsscrub_uncorrectable_errors;
          uint64_t btrfsscrub_unverified_errors;
          uint64_t btrfsscrub_corrected_errors;
          uint64_t btrfsscrub_last_physical;
        };

        struct guestfs_btrfsscrub_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_btrfsscrub *val; /* Elements. */
        };

        int guestfs_compare_btrfsscrub (const struct guestfs_btrfsscrub *, const struct guestfs_btrfsscrub *);
        int guestfs_compare_btrfsscrub_list (const struct guestfs_btrfsscrub_list *, const struct guestfs_btrfsscrub_list *);

        struct guestfs_btrfsscrub *guestfs_copy_btrfsscrub (const struct guestfs_btrfsscrub *);
        struct guestfs_btrfsscrub_list *guestfs_copy_btrfsscrub_list (const struct guestfs_btrfsscrub_list *);

        void guestfs_free_btrfsscrub (struct guestfs_btrfsscrub *);
        void guestfs_free_btrfsscrub_list (struct guestfs_btrfsscrub_list *);

   guestfs_xfsinfo
        struct guestfs_xfsinfo {
          char *xfs_mntpoint;
          uint32_t xfs_inodesize;
          uint32_t xfs_agcount;
          uint32_t xfs_agsize;
          uint32_t xfs_sectsize;
          uint32_t xfs_attr;
          uint32_t xfs_blocksize;
          uint64_t xfs_datablocks;
          uint32_t xfs_imaxpct;
          uint32_t xfs_sunit;
          uint32_t xfs_swidth;
          uint32_t xfs_dirversion;
          uint32_t xfs_dirblocksize;
          uint32_t xfs_cimode;
          char *xfs_logname;
          uint32_t xfs_logblocksize;
          uint32_t xfs_logblocks;
          uint32_t xfs_logversion;
          uint32_t xfs_logsectsize;
          uint32_t xfs_logsunit;
          uint32_t xfs_lazycount;
          char *xfs_rtname;
          uint32_t xfs_rtextsize;
          uint64_t xfs_rtblocks;
          uint64_t xfs_rtextents;
        };

        struct guestfs_xfsinfo_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_xfsinfo *val; /* Elements. */
        };

        int guestfs_compare_xfsinfo (const struct guestfs_xfsinfo *, const struct guestfs_xfsinfo *);
        int guestfs_compare_xfsinfo_list (const struct guestfs_xfsinfo_list *, const struct guestfs_xfsinfo_list *);

        struct guestfs_xfsinfo *guestfs_copy_xfsinfo (const struct guestfs_xfsinfo *);
        struct guestfs_xfsinfo_list *guestfs_copy_xfsinfo_list (const struct guestfs_xfsinfo_list *);

        void guestfs_free_xfsinfo (struct guestfs_xfsinfo *);
        void guestfs_free_xfsinfo_list (struct guestfs_xfsinfo_list *);

   guestfs_utsname
        struct guestfs_utsname {
          char *uts_sysname;
          char *uts_release;
          char *uts_version;
          char *uts_machine;
        };

        struct guestfs_utsname_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_utsname *val; /* Elements. */
        };

        int guestfs_compare_utsname (const struct guestfs_utsname *, const struct guestfs_utsname *);
        int guestfs_compare_utsname_list (const struct guestfs_utsname_list *, const struct guestfs_utsname_list *);

        struct guestfs_utsname *guestfs_copy_utsname (const struct guestfs_utsname *);
        struct guestfs_utsname_list *guestfs_copy_utsname_list (const struct guestfs_utsname_list *);

        void guestfs_free_utsname (struct guestfs_utsname *);
        void guestfs_free_utsname_list (struct guestfs_utsname_list *);

   guestfs_hivex_node
        struct guestfs_hivex_node {
          int64_t hivex_node_h;
        };

        struct guestfs_hivex_node_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_hivex_node *val; /* Elements. */
        };

        int guestfs_compare_hivex_node (const struct guestfs_hivex_node *, const struct guestfs_hivex_node *);
        int guestfs_compare_hivex_node_list (const struct guestfs_hivex_node_list *, const struct guestfs_hivex_node_list *);

        struct guestfs_hivex_node *guestfs_copy_hivex_node (const struct guestfs_hivex_node *);
        struct guestfs_hivex_node_list *guestfs_copy_hivex_node_list (const struct guestfs_hivex_node_list *);

        void guestfs_free_hivex_node (struct guestfs_hivex_node *);
        void guestfs_free_hivex_node_list (struct guestfs_hivex_node_list *);

   guestfs_hivex_value
        struct guestfs_hivex_value {
          int64_t hivex_value_h;
        };

        struct guestfs_hivex_value_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_hivex_value *val; /* Elements. */
        };

        int guestfs_compare_hivex_value (const struct guestfs_hivex_value *, const struct guestfs_hivex_value *);
        int guestfs_compare_hivex_value_list (const struct guestfs_hivex_value_list *, const struct guestfs_hivex_value_list *);

        struct guestfs_hivex_value *guestfs_copy_hivex_value (const struct guestfs_hivex_value *);
        struct guestfs_hivex_value_list *guestfs_copy_hivex_value_list (const struct guestfs_hivex_value_list *);

        void guestfs_free_hivex_value (struct guestfs_hivex_value *);
        void guestfs_free_hivex_value_list (struct guestfs_hivex_value_list *);

   guestfs_internal_mountable
        struct guestfs_internal_mountable {
          int32_t im_type;
          char *im_device;
          char *im_volume;
        };

        struct guestfs_internal_mountable_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_internal_mountable *val; /* Elements. */
        };

        int guestfs_compare_internal_mountable (const struct guestfs_internal_mountable *, const struct guestfs_internal_mountable *);
        int guestfs_compare_internal_mountable_list (const struct guestfs_internal_mountable_list *, const struct guestfs_internal_mountable_list *);

        struct guestfs_internal_mountable *guestfs_copy_internal_mountable (const struct guestfs_internal_mountable *);
        struct guestfs_internal_mountable_list *guestfs_copy_internal_mountable_list (const struct guestfs_internal_mountable_list *);

        void guestfs_free_internal_mountable (struct guestfs_internal_mountable *);
        void guestfs_free_internal_mountable_list (struct guestfs_internal_mountable_list *);

   guestfs_tsk_dirent
        struct guestfs_tsk_dirent {
          uint64_t tsk_inode;
          char tsk_type;
          int64_t tsk_size;
          char *tsk_name;
          uint32_t tsk_flags;
          int64_t tsk_atime_sec;
          int64_t tsk_atime_nsec;
          int64_t tsk_mtime_sec;
          int64_t tsk_mtime_nsec;
          int64_t tsk_ctime_sec;
          int64_t tsk_ctime_nsec;
          int64_t tsk_crtime_sec;
          int64_t tsk_crtime_nsec;
          int64_t tsk_nlink;
          char *tsk_link;
          int64_t tsk_spare1;
        };

        struct guestfs_tsk_dirent_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_tsk_dirent *val; /* Elements. */
        };

        int guestfs_compare_tsk_dirent (const struct guestfs_tsk_dirent *, const struct guestfs_tsk_dirent *);
        int guestfs_compare_tsk_dirent_list (const struct guestfs_tsk_dirent_list *, const struct guestfs_tsk_dirent_list *);

        struct guestfs_tsk_dirent *guestfs_copy_tsk_dirent (const struct guestfs_tsk_dirent *);
        struct guestfs_tsk_dirent_list *guestfs_copy_tsk_dirent_list (const struct guestfs_tsk_dirent_list *);

        void guestfs_free_tsk_dirent (struct guestfs_tsk_dirent *);
        void guestfs_free_tsk_dirent_list (struct guestfs_tsk_dirent_list *);

   guestfs_yara_detection
        struct guestfs_yara_detection {
          char *yara_name;
          char *yara_rule;
        };

        struct guestfs_yara_detection_list {
          uint32_t len; /* Number of elements in list. */
          struct guestfs_yara_detection *val; /* Elements. */
        };

        int guestfs_compare_yara_detection (const struct guestfs_yara_detection *, const struct guestfs_yara_detection *);
        int guestfs_compare_yara_detection_list (const struct guestfs_yara_detection_list *, const struct guestfs_yara_detection_list *);

        struct guestfs_yara_detection *guestfs_copy_yara_detection (const struct guestfs_yara_detection *);
        struct guestfs_yara_detection_list *guestfs_copy_yara_detection_list (const struct guestfs_yara_detection_list *);

        void guestfs_free_yara_detection (struct guestfs_yara_detection *);
        void guestfs_free_yara_detection_list (struct guestfs_yara_detection_list *);

AVAILABILITY

   GROUPS OF FUNCTIONALITY IN THE APPLIANCE
       Using "guestfs_available" you can test availability of the following groups of functions.
       This test queries the appliance to see if the appliance you are currently using supports
       the functionality.

       acl The following functions: "guestfs_acl_delete_def_file" "guestfs_acl_get_file"
           "guestfs_acl_set_file"

       blkdiscard
           The following functions: "guestfs_blkdiscard"

       blkdiscardzeroes
           The following functions: "guestfs_blkdiscardzeroes"

       btrfs
           The following functions: "guestfs_btrfs_balance_cancel" "guestfs_btrfs_balance_pause"
           "guestfs_btrfs_balance_resume" "guestfs_btrfs_balance_status"
           "guestfs_btrfs_device_add" "guestfs_btrfs_device_delete"
           "guestfs_btrfs_filesystem_balance" "guestfs_btrfs_filesystem_defragment"
           "guestfs_btrfs_filesystem_resize" "guestfs_btrfs_filesystem_show"
           "guestfs_btrfs_filesystem_sync" "guestfs_btrfs_fsck" "guestfs_btrfs_image"
           "guestfs_btrfs_qgroup_assign" "guestfs_btrfs_qgroup_create"
           "guestfs_btrfs_qgroup_destroy" "guestfs_btrfs_qgroup_limit"
           "guestfs_btrfs_qgroup_remove" "guestfs_btrfs_qgroup_show" "guestfs_btrfs_quota_enable"
           "guestfs_btrfs_quota_rescan" "guestfs_btrfs_replace"
           "guestfs_btrfs_rescue_chunk_recover" "guestfs_btrfs_rescue_super_recover"
           "guestfs_btrfs_scrub_cancel" "guestfs_btrfs_scrub_resume" "guestfs_btrfs_scrub_start"
           "guestfs_btrfs_scrub_status" "guestfs_btrfs_set_seeding"
           "guestfs_btrfs_subvolume_create" "guestfs_btrfs_subvolume_delete"
           "guestfs_btrfs_subvolume_get_default" "guestfs_btrfs_subvolume_list"
           "guestfs_btrfs_subvolume_set_default" "guestfs_btrfs_subvolume_show"
           "guestfs_btrfs_subvolume_snapshot" "guestfs_btrfstune_enable_extended_inode_refs"
           "guestfs_btrfstune_enable_skinny_metadata_extent_refs" "guestfs_btrfstune_seeding"
           "guestfs_mkfs_btrfs"

       extlinux
           The following functions: "guestfs_extlinux"

       f2fs
           The following functions: "guestfs_f2fs_expand"

       fstrim
           The following functions: "guestfs_fstrim"

       gdisk
           The following functions: "guestfs_part_expand_gpt" "guestfs_part_get_disk_guid"
           "guestfs_part_get_gpt_attributes" "guestfs_part_get_gpt_guid"
           "guestfs_part_get_gpt_type" "guestfs_part_set_disk_guid"
           "guestfs_part_set_disk_guid_random" "guestfs_part_set_gpt_attributes"
           "guestfs_part_set_gpt_guid" "guestfs_part_set_gpt_type"

       grub
           The following functions: "guestfs_grub_install"

       hivex
           The following functions: "guestfs_hivex_close" "guestfs_hivex_commit"
           "guestfs_hivex_node_add_child" "guestfs_hivex_node_children"
           "guestfs_hivex_node_delete_child" "guestfs_hivex_node_get_child"
           "guestfs_hivex_node_get_value" "guestfs_hivex_node_name" "guestfs_hivex_node_parent"
           "guestfs_hivex_node_set_value" "guestfs_hivex_node_values" "guestfs_hivex_open"
           "guestfs_hivex_root" "guestfs_hivex_value_key" "guestfs_hivex_value_string"
           "guestfs_hivex_value_type" "guestfs_hivex_value_utf8" "guestfs_hivex_value_value"

       inotify
           The following functions: "guestfs_inotify_add_watch" "guestfs_inotify_close"
           "guestfs_inotify_files" "guestfs_inotify_init" "guestfs_inotify_read"
           "guestfs_inotify_rm_watch"

       journal
           The following functions: "guestfs_internal_journal_get" "guestfs_journal_close"
           "guestfs_journal_get_data_threshold" "guestfs_journal_get_realtime_usec"
           "guestfs_journal_next" "guestfs_journal_open" "guestfs_journal_set_data_threshold"
           "guestfs_journal_skip"

       ldm The following functions: "guestfs_ldmtool_create_all"
           "guestfs_ldmtool_diskgroup_disks" "guestfs_ldmtool_diskgroup_name"
           "guestfs_ldmtool_diskgroup_volumes" "guestfs_ldmtool_remove_all"
           "guestfs_ldmtool_scan" "guestfs_ldmtool_scan_devices" "guestfs_ldmtool_volume_hint"
           "guestfs_ldmtool_volume_partitions" "guestfs_ldmtool_volume_type"
           "guestfs_list_ldm_partitions" "guestfs_list_ldm_volumes"

       libtsk
           The following functions: "guestfs_internal_filesystem_walk"
           "guestfs_internal_find_inode"

       libyara
           The following functions: "guestfs_internal_yara_scan" "guestfs_yara_destroy"
           "guestfs_yara_load"

       linuxcaps
           The following functions: "guestfs_cap_get_file" "guestfs_cap_set_file"

       linuxfsuuid
           The following functions: "guestfs_mke2fs_JU" "guestfs_mke2journal_U"
           "guestfs_mkswap_U" "guestfs_swapoff_uuid" "guestfs_swapon_uuid"

       linuxmodules
           The following functions: "guestfs_modprobe"

       linuxxattrs
           The following functions: "guestfs_getxattr" "guestfs_getxattrs"
           "guestfs_internal_lxattrlist" "guestfs_lgetxattr" "guestfs_lgetxattrs"
           "guestfs_lremovexattr" "guestfs_lsetxattr" "guestfs_removexattr" "guestfs_setxattr"

       luks
           The following functions: "guestfs_cryptsetup_close" "guestfs_cryptsetup_open"
           "guestfs_luks_add_key" "guestfs_luks_close" "guestfs_luks_format"
           "guestfs_luks_format_cipher" "guestfs_luks_kill_slot" "guestfs_luks_open"
           "guestfs_luks_open_ro" "guestfs_luks_uuid"

       lvm2
           The following functions: "guestfs_lvcreate" "guestfs_lvcreate_free"
           "guestfs_lvm_remove_all" "guestfs_lvm_set_filter" "guestfs_lvremove"
           "guestfs_lvresize" "guestfs_lvresize_free" "guestfs_lvs" "guestfs_lvs_full"
           "guestfs_pvchange_uuid" "guestfs_pvchange_uuid_all" "guestfs_pvcreate"
           "guestfs_pvremove" "guestfs_pvresize" "guestfs_pvresize_size" "guestfs_pvs"
           "guestfs_pvs_full" "guestfs_vg_activate" "guestfs_vg_activate_all"
           "guestfs_vgchange_uuid" "guestfs_vgchange_uuid_all" "guestfs_vgcreate"
           "guestfs_vgmeta" "guestfs_vgremove" "guestfs_vgs" "guestfs_vgs_full"

       mdadm
           The following functions: "guestfs_md_create" "guestfs_md_detail" "guestfs_md_stat"
           "guestfs_md_stop"

       mknod
           The following functions: "guestfs_mkfifo" "guestfs_mknod" "guestfs_mknod_b"
           "guestfs_mknod_c"

       ntfs3g
           The following functions: "guestfs_ntfs_3g_probe" "guestfs_ntfsclone_in"
           "guestfs_ntfsclone_out" "guestfs_ntfsfix"

       ntfsprogs
           The following functions: "guestfs_ntfsresize" "guestfs_ntfsresize_size"

       rsync
           The following functions: "guestfs_rsync" "guestfs_rsync_in" "guestfs_rsync_out"

       scrub
           The following functions: "guestfs_scrub_device" "guestfs_scrub_file"
           "guestfs_scrub_freespace"

       selinux
           The following functions: "guestfs_getcon" "guestfs_setcon"

       selinuxrelabel
           The following functions: "guestfs_selinux_relabel"

       sleuthkit
           The following functions: "guestfs_download_blocks" "guestfs_download_inode"

       squashfs
           The following functions: "guestfs_mksquashfs"

       syslinux
           The following functions: "guestfs_syslinux"

       wipefs
           The following functions: "guestfs_wipefs"

       xfs The following functions: "guestfs_xfs_admin" "guestfs_xfs_growfs" "guestfs_xfs_info"
           "guestfs_xfs_repair"

       xz  The following functions: "guestfs_txz_in" "guestfs_txz_out"

       zerofree
           The following functions: "guestfs_zerofree"

   FILESYSTEM AVAILABLE
       The "guestfs_filesystem_available" call tests whether a filesystem type is supported by
       the appliance kernel.

       This is mainly useful as a negative test.  If this returns true, it doesn't mean that a
       particular filesystem can be mounted, since filesystems can fail for other reasons such as
       it being a later version of the filesystem, or having incompatible features.

   GUESTFISH supported COMMAND
       In guestfish(3) there is a handy interactive command "supported" which prints out the
       available groups and whether they are supported by this build of libguestfs.  Note however
       that you have to do "run" first.

   SINGLE CALLS AT COMPILE TIME
       Since version 1.5.8, "<guestfs.h>" defines symbols for each C API function, such as:

        #define GUESTFS_HAVE_DD 1

       if "guestfs_dd" is available.

       Before version 1.5.8, if you needed to test whether a single libguestfs function is
       available at compile time, we recommended using build tools such as autoconf or cmake.
       For example in autotools you could use:

        AC_CHECK_LIB([guestfs],[guestfs_create])
        AC_CHECK_FUNCS([guestfs_dd])

       which would result in "HAVE_GUESTFS_DD" being either defined or not defined in your
       program.

   SINGLE CALLS AT RUN TIME
       Testing at compile time doesn't guarantee that a function really exists in the library.
       The reason is that you might be dynamically linked against a previous libguestfs.so
       (dynamic library) which doesn't have the call.  This situation unfortunately results in a
       segmentation fault, which is a shortcoming of the C dynamic linking system itself.

       You can use dlopen(3) to test if a function is available at run time, as in this example
       program (note that you still need the compile time check as well):

        #include <stdio.h>
        #include <stdlib.h>
        #include <unistd.h>
        #include <dlfcn.h>
        #include <guestfs.h>

        main ()
        {
        #ifdef GUESTFS_HAVE_DD
          void *dl;
          int has_function;

          /* Test if the function guestfs_dd is really available. */
          dl = dlopen (NULL, RTLD_LAZY);
          if (!dl) {
            fprintf (stderr, "dlopen: %s\n", dlerror ());
            exit (EXIT_FAILURE);
          }
          has_function = dlsym (dl, "guestfs_dd") != NULL;
          dlclose (dl);

          if (!has_function)
            printf ("this libguestfs.so does NOT have guestfs_dd function\n");
          else {
            printf ("this libguestfs.so has guestfs_dd function\n");
            /* Now it's safe to call
            guestfs_dd (g, "foo", "bar");
            */
          }
        #else
          printf ("guestfs_dd function was not found at compile time\n");
        #endif
         }

       You may think the above is an awful lot of hassle, and it is.  There are other ways
       outside of the C linking system to ensure that this kind of incompatibility never arises,
       such as using package versioning:

        Requires: libguestfs >= 1.0.80

CALLS WITH OPTIONAL ARGUMENTS

       A recent feature of the API is the introduction of calls which take optional arguments.
       In C these are declared 3 ways.  The main way is as a call which takes variable arguments
       (ie. "..."), as in this example:

        int guestfs_add_drive_opts (guestfs_h *g, const char *filename, ...);

       Call this with a list of optional arguments, terminated by "-1".  So to call with no
       optional arguments specified:

        guestfs_add_drive_opts (g, filename, -1);

       With a single optional argument:

        guestfs_add_drive_opts (g, filename,
                                GUESTFS_ADD_DRIVE_OPTS_FORMAT, "qcow2",
                                -1);

       With two:

        guestfs_add_drive_opts (g, filename,
                                GUESTFS_ADD_DRIVE_OPTS_FORMAT, "qcow2",
                                GUESTFS_ADD_DRIVE_OPTS_READONLY, 1,
                                -1);

       and so forth.  Don’t forget the terminating "-1" otherwise Bad Things will happen!

   USING va_list FOR OPTIONAL ARGUMENTS
       The second variant has the same name with the suffix "_va", which works the same way but
       takes a "va_list".  See the C manual for details.  For the example function, this is
       declared:

        int guestfs_add_drive_opts_va (guestfs_h *g, const char *filename,
                                       va_list args);

   CONSTRUCTING OPTIONAL ARGUMENTS
       The third variant is useful where you need to construct these calls.  You pass in a
       structure where you fill in the optional fields.  The structure has a bitmask as the first
       element which you must set to indicate which fields you have filled in.  For our example
       function the structure and call are declared:

        struct guestfs_add_drive_opts_argv {
          uint64_t bitmask;
          int readonly;
          const char *format;
          /* ... */
        };
        int guestfs_add_drive_opts_argv (guestfs_h *g, const char *filename,
                     const struct guestfs_add_drive_opts_argv *optargs);

       You could call it like this:

        struct guestfs_add_drive_opts_argv optargs = {
          .bitmask = GUESTFS_ADD_DRIVE_OPTS_READONLY_BITMASK |
                     GUESTFS_ADD_DRIVE_OPTS_FORMAT_BITMASK,
          .readonly = 1,
          .format = "qcow2"
        };

        guestfs_add_drive_opts_argv (g, filename, &optargs);

       Notes:

       •   The "_BITMASK" suffix on each option name when specifying the bitmask.

       •   You do not need to fill in all fields of the structure.

       •   There must be a one-to-one correspondence between fields of the structure that are
           filled in, and bits set in the bitmask.

   OPTIONAL ARGUMENTS IN OTHER LANGUAGES
       In other languages, optional arguments are expressed in the way that is natural for that
       language.  We refer you to the language-specific documentation for more details on that.

       For guestfish, see "OPTIONAL ARGUMENTS" in guestfish(1).

EVENTS

   SETTING CALLBACKS TO HANDLE EVENTS
       Note: This section documents the generic event mechanism introduced in libguestfs 1.10,
       which you should use in new code if possible.  The old functions
       "guestfs_set_log_message_callback", "guestfs_set_subprocess_quit_callback",
       "guestfs_set_launch_done_callback", "guestfs_set_close_callback" and
       "guestfs_set_progress_callback" are no longer documented in this manual page.  Because of
       the ABI guarantee, the old functions continue to work.

       Handles generate events when certain things happen, such as log messages being generated,
       progress messages during long-running operations, or the handle being closed.  The API
       calls described below let you register a callback to be called when events happen.  You
       can register multiple callbacks (for the same, different or overlapping sets of events),
       and individually remove callbacks.  If callbacks are not removed, then they remain in
       force until the handle is closed.

       In the current implementation, events are only generated synchronously: that means that
       events (and hence callbacks) can only happen while you are in the middle of making another
       libguestfs call.  The callback is called in the same thread.

       Events may contain a payload, usually nothing (void), an array of 64 bit unsigned
       integers, or a message buffer.  Payloads are discussed later on.

   CLASSES OF EVENTS
       GUESTFS_EVENT_CLOSE (payload type: void)
           The callback function will be called while the handle is being closed (synchronously
           from "guestfs_close").

           Note that libguestfs installs an atexit(3) handler to try to clean up handles that are
           open when the program exits.  This means that this callback might be called indirectly
           from exit(3), which can cause unexpected problems in higher-level languages (eg. if
           your HLL interpreter has already been cleaned up by the time this is called, and if
           your callback then jumps into some HLL function).

           If no callback is registered: the handle is closed without any callback being invoked.

       GUESTFS_EVENT_SUBPROCESS_QUIT (payload type: void)
           The callback function will be called when the child process quits, either
           asynchronously or if killed by "guestfs_kill_subprocess".  (This corresponds to a
           transition from any state to the CONFIG state).

           If no callback is registered: the event is ignored.

       GUESTFS_EVENT_LAUNCH_DONE (payload type: void)
           The callback function will be called when the child process becomes ready first time
           after it has been launched.  (This corresponds to a transition from LAUNCHING to the
           READY state).

           If no callback is registered: the event is ignored.

       GUESTFS_EVENT_PROGRESS (payload type: array of 4 x uint64_t)
           Some long-running operations can generate progress messages.  If this callback is
           registered, then it will be called each time a progress message is generated (usually
           two seconds after the operation started, and three times per second thereafter until
           it completes, although the frequency may change in future versions).

           The callback receives in the payload four unsigned 64 bit numbers which are (in
           order): "proc_nr", "serial", "position", "total".

           The units of "total" are not defined, although for some operations "total" may relate
           in some way to the amount of data to be transferred (eg. in bytes or megabytes), and
           "position" may be the portion which has been transferred.

           The only defined and stable parts of the API are:

           •   The callback can display to the user some type of progress bar or indicator which
               shows the ratio of "position":"total".

           •   0 <= "position" <= "total"

           •   If any progress notification is sent during a call, then a final progress
               notification is always sent when "position" = "total" (unless the call fails with
               an error).

               This is to simplify caller code, so callers can easily set the progress indicator
               to "100%" at the end of the operation, without requiring special code to detect
               this case.

           •   For some calls we are unable to estimate the progress of the call, but we can
               still generate progress messages to indicate activity.  This is known as "pulse
               mode", and is directly supported by certain progress bar implementations (eg.
               GtkProgressBar).

               For these calls, zero or more progress messages are generated with "position = 0"
               and "total = 1", followed by a final message with "position = total = 1".

               As noted above, if the call fails with an error then the final message may not be
               generated.

           The callback also receives the procedure number ("proc_nr") and serial number
           ("serial") of the call.  These are only useful for debugging protocol issues, and the
           callback can normally ignore them.  The callback may want to print these numbers in
           error messages or debugging messages.

           If no callback is registered: progress messages are discarded.

       GUESTFS_EVENT_APPLIANCE (payload type: message buffer)
           The callback function is called whenever a log message is generated by qemu, the
           appliance kernel, guestfsd (daemon), or utility programs.

           If the verbose flag ("guestfs_set_verbose") is set before launch ("guestfs_launch")
           then additional debug messages are generated.

           If no callback is registered: the messages are discarded unless the verbose flag is
           set in which case they are sent to stderr.  You can override the printing of verbose
           messages to stderr by setting up a callback.

       GUESTFS_EVENT_LIBRARY (payload type: message buffer)
           The callback function is called whenever a log message is generated by the library
           part of libguestfs.

           If the verbose flag ("guestfs_set_verbose") is set then additional debug messages are
           generated.

           If no callback is registered: the messages are discarded unless the verbose flag is
           set in which case they are sent to stderr.  You can override the printing of verbose
           messages to stderr by setting up a callback.

       GUESTFS_EVENT_WARNING (payload type: message buffer)
           The callback function is called whenever a warning message is generated by the library
           part of libguestfs.

           If no callback is registered: the messages are printed to stderr.  You can override
           the printing of warning messages to stderr by setting up a callback.

       GUESTFS_EVENT_TRACE (payload type: message buffer)
           The callback function is called whenever a trace message is generated.  This only
           applies if the trace flag ("guestfs_set_trace") is set.

           If no callback is registered: the messages are sent to stderr.  You can override the
           printing of trace messages to stderr by setting up a callback.

       GUESTFS_EVENT_ENTER (payload type: function name)
           The callback function is called whenever a libguestfs function is entered.

           The payload is a string which contains the name of the function that we are entering
           (not including "guestfs_" prefix).

           Note that libguestfs functions can call themselves, so you may see many events from a
           single call.  A few libguestfs functions do not generate this event.

           If no callback is registered: the event is ignored.

       GUESTFS_EVENT_LIBVIRT_AUTH (payload type: libvirt URI)
           For any API function that opens a libvirt connection, this event may be generated to
           indicate that libvirt demands authentication information.  See "LIBVIRT
           AUTHENTICATION" below.

           If no callback is registered: "virConnectAuthPtrDefault" is used (suitable for
           command-line programs only).

   EVENT API
       guestfs_set_event_callback

        int guestfs_set_event_callback (guestfs_h *g,
                                        guestfs_event_callback cb,
                                        uint64_t event_bitmask,
                                        int flags,
                                        void *opaque);

       This function registers a callback ("cb") for all event classes in the "event_bitmask".

       For example, to register for all log message events, you could call this function with the
       bitmask "GUESTFS_EVENT_APPLIANCE|GUESTFS_EVENT_LIBRARY|GUESTFS_EVENT_WARNING".  To
       register a single callback for all possible classes of events, use "GUESTFS_EVENT_ALL".

       "flags" should always be passed as 0.

       "opaque" is an opaque pointer which is passed to the callback.  You can use it for any
       purpose.

       The return value is the event handle (an integer) which you can use to delete the callback
       (see below).

       If there is an error, this function returns "-1", and sets the error in the handle in the
       usual way (see "guestfs_last_error" etc.)

       Callbacks remain in effect until they are deleted, or until the handle is closed.

       In the case where multiple callbacks are registered for a particular event class, all of
       the callbacks are called.  The order in which multiple callbacks are called is not
       defined.

       guestfs_delete_event_callback

        void guestfs_delete_event_callback (guestfs_h *g, int event_handle);

       Delete a callback that was previously registered.  "event_handle" should be the integer
       that was returned by a previous call to "guestfs_set_event_callback" on the same handle.

       guestfs_event_to_string

        char *guestfs_event_to_string (uint64_t event);

       "event" is either a single event or a bitmask of events.  This returns a string
       representation (useful for debugging or printing events).

       A single event is returned as the name in lower case, eg. "close".

       A bitmask of several events is returned as a comma-separated list, eg. "close,progress".

       If zero is passed, then the empty string "" is returned.

       On success this returns a string.  On error it returns NULL and sets "errno".

       The returned string must be freed by the caller.

       guestfs_event_callback

        typedef void (*guestfs_event_callback) (
                         guestfs_h *g,
                         void *opaque,
                         uint64_t event,
                         int event_handle,
                         int flags,
                         const char *buf, size_t buf_len,
                         const uint64_t *array, size_t array_len);

       This is the type of the event callback function that you have to provide.

       The basic parameters are: the handle ("g"), the opaque user pointer ("opaque"), the event
       class (eg. "GUESTFS_EVENT_PROGRESS"), the event handle, and "flags" which in the current
       API you should ignore.

       The remaining parameters contain the event payload (if any).  Each event may contain a
       payload, which usually relates to the event class, but for future proofing your code
       should be written to handle any payload for any event class.

       "buf" and "buf_len" contain a message buffer (if "buf_len == 0", then there is no message
       buffer).  Note that this message buffer can contain arbitrary 8 bit data, including NUL
       bytes.

       "array" and "array_len" is an array of 64 bit unsigned integers.  At the moment this is
       only used for progress messages.

   EXAMPLE: CAPTURING LOG MESSAGES
       A working program demonstrating this can be found in examples/debug-logging.c in the
       source of libguestfs.

       One motivation for the generic event API was to allow GUI programs to capture debug and
       other messages.  In libguestfs ≤ 1.8 these were sent unconditionally to "stderr".

       Events associated with log messages are: "GUESTFS_EVENT_LIBRARY",
       "GUESTFS_EVENT_APPLIANCE", "GUESTFS_EVENT_WARNING" and "GUESTFS_EVENT_TRACE".  (Note that
       error messages are not events; you must capture error messages separately).

       Programs have to set up a callback to capture the classes of events of interest:

        int eh =
          guestfs_set_event_callback
            (g, message_callback,
             GUESTFS_EVENT_LIBRARY | GUESTFS_EVENT_APPLIANCE |
             GUESTFS_EVENT_WARNING | GUESTFS_EVENT_TRACE,
             0, NULL) == -1)
        if (eh == -1) {
          // handle error in the usual way
        }

       The callback can then direct messages to the appropriate place.  In this example, messages
       are directed to syslog:

        static void
        message_callback (
                guestfs_h *g,
                void *opaque,
                uint64_t event,
                int event_handle,
                int flags,
                const char *buf, size_t buf_len,
                const uint64_t *array, size_t array_len)
        {
          const int priority = LOG_USER|LOG_INFO;
          if (buf_len > 0)
            syslog (priority, "event 0x%lx: %s", event, buf);
        }

   LIBVIRT AUTHENTICATION
       Some libguestfs API calls can open libvirt connections.  Currently the only ones are
       "guestfs_add_domain"; and "guestfs_launch" if the libvirt backend has been selected.
       Libvirt connections may require authentication, for example if they need to access a
       remote server or to access root services from non-root.  Libvirt authentication happens
       via a callback mechanism, see
       http://libvirt.org/guide/html/Application_Development_Guide-Connections.html

       You may provide libvirt authentication data by registering a callback for events of type
       "GUESTFS_EVENT_LIBVIRT_AUTH".

       If no such event is registered, then libguestfs uses a libvirt function that provides
       command-line prompts ("virConnectAuthPtrDefault").  This is only suitable for command-line
       libguestfs programs.

       To provide authentication, first call "guestfs_set_libvirt_supported_credentials" with the
       list of credentials your program knows how to provide.  Second, register a callback for
       the "GUESTFS_EVENT_LIBVIRT_AUTH" event.  The event handler will be called when libvirt is
       requesting authentication information.

       In the event handler, call "guestfs_get_libvirt_requested_credentials" to get a list of
       the credentials that libvirt is asking for.  You then need to ask (eg. the user) for each
       credential, and call "guestfs_set_libvirt_requested_credential" with the answer.  Note
       that for each credential, additional information may be available via the calls
       "guestfs_get_libvirt_requested_credential_prompt",
       "guestfs_get_libvirt_requested_credential_challenge" or
       "guestfs_get_libvirt_requested_credential_defresult".

       The example program below should make this clearer.

       There is also a more substantial working example program supplied with the libguestfs
       sources, called libvirt-auth.c.

        main ()
        {
          guestfs_h *g;
          char *creds[] = { "authname", "passphrase", NULL };
          int r, eh;

          g = guestfs_create ();
          if (!g) exit (EXIT_FAILURE);

          /* Tell libvirt what credentials the program supports. */
          r = guestfs_set_libvirt_supported_credentials (g, creds);
          if (r == -1)
            exit (EXIT_FAILURE);

          /* Set up the event handler. */
          eh = guestfs_set_event_callback (
              g, do_auth,
              GUESTFS_EVENT_LIBVIRT_AUTH, 0, NULL);
          if (eh == -1)
            exit (EXIT_FAILURE);

          /* An example of a call that may ask for credentials. */
          r = guestfs_add_domain (
              g, "dom",
              GUESTFS_ADD_DOMAIN_LIBVIRTURI, "qemu:///system",
              -1);
          if (r == -1)
            exit (EXIT_FAILURE);

          exit (EXIT_SUCCESS);
        }

        static void
        do_auth (guestfs_h *g,
                 void *opaque,
                 uint64_t event,
                 int event_handle,
                 int flags,
                 const char *buf, size_t buf_len,
                 const uint64_t *array, size_t array_len)
        {
          char **creds;
          size_t i;
          char *prompt;
          char *reply;
          size_t replylen;
          int r;

          // buf will be the libvirt URI.  buf_len may be ignored.
          printf ("Authentication required for libvirt conn '%s'\n",
                  buf);

          // Ask libguestfs what credentials libvirt is demanding.
          creds = guestfs_get_libvirt_requested_credentials (g);
          if (creds == NULL)
            exit (EXIT_FAILURE);

          // Now ask the user for answers.
          for (i = 0; creds[i] != NULL; ++i)
          {
            if (strcmp (creds[i], "authname") == 0 ||
                strcmp (creds[i], "passphrase") == 0)
            {
              prompt =
                guestfs_get_libvirt_requested_credential_prompt (g, i);
              if (prompt && strcmp (prompt, "") != 0)
                printf ("%s: ", prompt);
              free (prompt);

              // Some code here to ask for the credential.
              // ...
              // Put the reply in 'reply', length 'replylen' (bytes).

             r = guestfs_set_libvirt_requested_credential (g, i,
                 reply, replylen);
             if (r == -1)
               exit (EXIT_FAILURE);
            }

            free (creds[i]);
          }

          free (creds);
        }

CANCELLING LONG TRANSFERS

       Some operations can be cancelled by the caller while they are in progress.  Currently only
       operations that involve uploading or downloading data can be cancelled (technically:
       operations that have "FileIn" or "FileOut" parameters in the generator).

       To cancel the transfer, call "guestfs_user_cancel".  For more information, read the
       description of "guestfs_user_cancel".

PRIVATE DATA AREA

       You can attach named pieces of private data to the libguestfs handle, fetch them by name,
       and walk over them, for the lifetime of the handle.  This is called the private data area
       and is only available from the C API.

       To attach a named piece of data, use the following call:

        void guestfs_set_private (guestfs_h *g, const char *key, void *data);

       "key" is the name to associate with this data, and "data" is an arbitrary pointer (which
       can be "NULL").  Any previous item with the same key is overwritten.

       You can use any "key" string you want, but avoid keys beginning with an underscore
       character (libguestfs uses those for its own internal purposes, such as implementing
       language bindings).  It is recommended that you prefix the key with some unique string to
       avoid collisions with other users.

       To retrieve the pointer, use:

        void *guestfs_get_private (guestfs_h *g, const char *key);

       This function returns "NULL" if either no data is found associated with "key", or if the
       user previously set the "key"’s "data" pointer to "NULL".

       Libguestfs does not try to look at or interpret the "data" pointer in any way.  As far as
       libguestfs is concerned, it need not be a valid pointer at all.  In particular, libguestfs
       does not try to free the data when the handle is closed.  If the data must be freed, then
       the caller must either free it before calling "guestfs_close" or must set up a close
       callback to do it (see "GUESTFS_EVENT_CLOSE").

       To walk over all entries, use these two functions:

        void *guestfs_first_private (guestfs_h *g, const char **key_rtn);

        void *guestfs_next_private (guestfs_h *g, const char **key_rtn);

       "guestfs_first_private" returns the first key, pointer pair ("first" does not have any
       particular meaning -- keys are not returned in any defined order).  A pointer to the key
       is returned in *key_rtn and the corresponding data pointer is returned from the function.
       "NULL" is returned if there are no keys stored in the handle.

       "guestfs_next_private" returns the next key, pointer pair.  The return value of this
       function is "NULL" if there are no further entries to return.

       Notes about walking over entries:

       •   You must not call "guestfs_set_private" while walking over the entries.

       •   The handle maintains an internal iterator which is reset when you call
           "guestfs_first_private".  This internal iterator is invalidated when you call
           "guestfs_set_private".

       •   If you have set the data pointer associated with a key to "NULL", ie:

            guestfs_set_private (g, key, NULL);

           then that "key" is not returned when walking.

       •   *key_rtn is only valid until the next call to "guestfs_first_private",
           "guestfs_next_private" or "guestfs_set_private".

       The following example code shows how to print all keys and data pointers that are
       associated with the handle "g":

        const char *key;
        void *data = guestfs_first_private (g, &key);
        while (data != NULL)
          {
            printf ("key = %s, data = %p\n", key, data);
            data = guestfs_next_private (g, &key);
          }

       More commonly you are only interested in keys that begin with an application-specific
       prefix "foo_".  Modify the loop like so:

        const char *key;
        void *data = guestfs_first_private (g, &key);
        while (data != NULL)
          {
            if (strncmp (key, "foo_", strlen ("foo_")) == 0)
              printf ("key = %s, data = %p\n", key, data);
            data = guestfs_next_private (g, &key);
          }

       If you need to modify keys while walking, then you have to jump back to the beginning of
       the loop.  For example, to delete all keys prefixed with "foo_":

         const char *key;
         void *data;
        again:
         data = guestfs_first_private (g, &key);
         while (data != NULL)
           {
             if (strncmp (key, "foo_", strlen ("foo_")) == 0)
               {
                 guestfs_set_private (g, key, NULL);
                 /* note that 'key' pointer is now invalid, and so is
                    the internal iterator */
                 goto again;
               }
             data = guestfs_next_private (g, &key);
           }

       Note that the above loop is guaranteed to terminate because the keys are being deleted,
       but other manipulations of keys within the loop might not terminate unless you also
       maintain an indication of which keys have been visited.

SYSTEMTAP

       The libguestfs C library can be probed using systemtap or DTrace.  This is true of any
       library, not just libguestfs.  However libguestfs also contains static markers to help in
       probing internal operations.

       You can list all the static markers by doing:

        stap -l 'process("/usr/lib*/libguestfs.so.0")
                     .provider("guestfs").mark("*")'

       Note: These static markers are not part of the stable API and may change in future
       versions.

   SYSTEMTAP SCRIPT EXAMPLE
       This script contains examples of displaying both the static markers and some ordinary C
       entry points:

        global last;

        function display_time () {
              now = gettimeofday_us ();
              delta = 0;
              if (last > 0)
                    delta = now - last;
              last = now;

              printf ("%d (+%d):", now, delta);
        }

        probe begin {
              last = 0;
              printf ("ready\n");
        }

        /* Display all calls to static markers. */
        probe process("/usr/lib*/libguestfs.so.0")
                  .provider("guestfs").mark("*") ? {
              display_time();
              printf ("\t%s %s\n", $$name, $$parms);
        }

        /* Display all calls to guestfs_mkfs* functions. */
        probe process("/usr/lib*/libguestfs.so.0")
                  .function("guestfs_mkfs*") ? {
              display_time();
              printf ("\t%s %s\n", probefunc(), $$parms);
        }

       The script above can be saved to test.stap and run using the stap(1) program.  Note that
       you either have to be root, or you have to add yourself to several special stap groups.
       Consult the systemtap documentation for more information.

        # stap /tmp/test.stap
        ready

       In another terminal, run a guestfish command such as this:

        guestfish -N fs

       In the first terminal, stap trace output similar to this is shown:

        1318248056692655 (+0): launch_start
        1318248056692850 (+195):       launch_build_appliance_start
        1318248056818285 (+125435):    launch_build_appliance_end
        1318248056838059 (+19774):     launch_run_qemu
        1318248061071167 (+4233108):   launch_end
        1318248061280324 (+209157):    guestfs_mkfs g=0x1024ab0 fstype=0x46116f device=0x1024e60

LIBGUESTFS VERSION NUMBERS

Since April 2010, libguestfs has started to make separate development and stable releases,
along with corresponding branches in our git repository. These separate releases can be
identified by version number:

even numbers for stable: 1.2.x, 1.4.x, ...
.-------- odd numbers for development: 1.3.x, 1.5.x, ...
|
v
1 . 3 . 5
^ ^
| |
| `-------- sub-version
|
`------ always '1' because we don't change the ABI

Thus "1.3.5" is the 5th update to the development branch "1.3".

As time passes we cherry pick fixes from the development branch and backport those into
the stable branch, the effect being that the stable branch should get more stable and less
buggy over time. So the stable releases are ideal for people who don't need new features
but would just like the software to work.

Our criteria for backporting changes are:

• Documentation changes which don’t affect any code are backported unless the
documentation refers to a future feature which is not in stable.

• Bug fixes which are not controversial, fix obvious problems, and have been well tested
are backported.

• Simple rearrangements of code which shouldn't affect how it works get backported.
This is so that the code in the two branches doesn't get too far out of step, allowing
us to backport future fixes more easily.

• We don’t backport new features, new APIs, new tools etc, except in one exceptional
case: the new feature is required in order to implement an important bug fix.

A new stable branch starts when we think the new features in development are substantial
and compelling enough over the current stable branch to warrant it. When that happens we
create new stable and development versions 1.N.0 and 1.(N+1).0 [N is even]. The new dot-
oh release won't necessarily be so stable at this point, but by backporting fixes from
development, that branch will stabilize over time.

LIMITS

PROTOCOL LIMITS
Internally libguestfs uses a message-based protocol to pass API calls and their responses
to and from a small "appliance" (see guestfs-internals(1) for plenty more detail about
this). The maximum message size used by the protocol is slightly less than 4 MB. For
some API calls you may need to be aware of this limit. The API calls which may be
affected are individually documented, with a link back to this section of the
documentation.

In libguestfs < 1.19.32, several calls had to encode either their entire argument list or
their entire return value (or sometimes both) in a single protocol message, and this gave
them an arbitrary limitation on how much data they could handle. For example,
"guestfs_cat" could only download a file if it was less than around 4 MB in size. In
later versions of libguestfs, some of these limits have been removed. The APIs which were
previously limited but are now unlimited (except perhaps by available memory) are listed
below. To find out if a specific API is subject to protocol limits, check for the warning
in the API documentation which links to this section, and remember to check the version of
the documentation that matches the version of libguestfs you are using.

"guestfs_cat", "guestfs_find", "guestfs_read_file", "guestfs_read_lines", "guestfs_write",
"guestfs_write_append", "guestfs_lstatlist", "guestfs_lxattrlist", "guestfs_readlinklist",
"guestfs_ls".

See also "UPLOADING" and "DOWNLOADING" for further information about copying large amounts
of data into or out of a filesystem.

MAXIMUM NUMBER OF DISKS
In libguestfs ≥ 1.19.7, you can query the maximum number of disks that may be added by
calling "guestfs_max_disks". In earlier versions of libguestfs (ie. where this call is
not available) you should assume the maximum is 25.

The rest of this section covers implementation details, which could change in future.

When using virtio-scsi disks (the default if available in qemu) the current limit is 255
disks. When using virtio-blk (the old default) the limit is around 27 disks, but may vary
according to implementation details and whether the network is enabled.

Virtio-scsi as used by libguestfs is configured to use one target per disk, and 256
targets are available.

Virtio-blk consumes 1 virtual PCI slot per disk, and PCI is limited to 31 slots, but some
of these are used for other purposes.

One virtual disk is used by libguestfs internally.

Before libguestfs 1.19.7, disk names had to be a single character (eg. /dev/sda through
/dev/sdz), and since one disk is reserved, that meant the limit was 25. This has been
fixed in more recent versions.

MAXIMUM NUMBER OF PARTITIONS PER DISK
Virtio limits the maximum number of partitions per disk to 15.

This is because it reserves 4 bits for the minor device number (thus /dev/vda, and
/dev/vda1 through /dev/vda15).

If you attach a disk with more than 15 partitions, the extra partitions are ignored by
libguestfs.

MAXIMUM SIZE OF A DISK
Probably the limit is between 2**63-1 and 2**64-1 bytes.

We have tested block devices up to 1 exabyte (2**60 or 1,152,921,504,606,846,976 bytes)
using sparse files backed by an XFS host filesystem.

Although libguestfs probably does not impose any limit, the underlying host storage will.
If you store disk images on a host ext4 filesystem, then the maximum size will be limited
by the maximum ext4 file size (currently 16 TB). If you store disk images as host logical
volumes then you are limited by the maximum size of an LV.

For the hugest disk image files, we recommend using XFS on the host for storage.

MAXIMUM SIZE OF A PARTITION
The MBR (ie. classic MS-DOS) partitioning scheme uses 32 bit sector numbers. Assuming a
512 byte sector size, this means that MBR cannot address a partition located beyond 2 TB
on the disk.

It is recommended that you use GPT partitions on disks which are larger than this size.
GPT uses 64 bit sector numbers and so can address partitions which are theoretically
larger than the largest disk we could support.

MAXIMUM SIZE OF A FILESYSTEM, FILES, DIRECTORIES
This depends on the filesystem type. libguestfs itself does not impose any known limit.
Consult Wikipedia or the filesystem documentation to find out what these limits are.

MAXIMUM UPLOAD AND DOWNLOAD
The API functions "guestfs_upload", "guestfs_download", "guestfs_tar_in",
"guestfs_tar_out" and the like allow unlimited sized uploads and downloads.

INSPECTION LIMITS
The inspection code has several arbitrary limits on things like the size of Windows
Registry hive it will read, and the length of product name. These are intended to stop a
malicious guest from consuming arbitrary amounts of memory and disk space on the host, and
should not be reached in practice. See the source code for more information.

ADVANCED MACHINE READABLE OUTPUT

Some of the tools support a --machine-readable option, which is generally used to make the
output more machine friendly, for easier parsing for example. By default, this output
goes to stdout.

When using the --machine-readable option, the progress, information, warning, and error
messages are also printed in JSON format for easier log tracking. Thus, it is highly
recommended to redirect the machine-readable output to a different stream. The format of
these JSON messages is like the following (actually printed within a single line, below it
is indented for readability):

{
"message": "Finishing off",
"timestamp": "2019-03-22T14:46:49.067294446+01:00",
"type": "message"
}

"type" can be: "message" for progress messages, "info" for information messages, "warning"
for warning messages, and "error" for error message. "timestamp" is the RFC 3339
timestamp of the message.

In addition to that, a subset of these tools support an extra string passed to the
--machine-readable option: this string specifies where the machine-readable output will
go.

The possible values are:

fd:fd
The output goes to the specified fd, which is a file descriptor already opened for
writing.

file:filename
The output goes to the specified filename.

stream:stdout
The output goes to stdout. This is basically the same as the default behaviour of
--machine-readable with no parameter, although stdout as output is specified
explicitly.

stream:stderr
The output goes to stderr.

ENVIRONMENT VARIABLES

LIBGUESTFS_APPEND
Pass additional options to the guest kernel.

LIBGUESTFS_ATTACH_METHOD
This is the old way to set "LIBGUESTFS_BACKEND".

LIBGUESTFS_BACKEND
Choose the default way to create the appliance. See "guestfs_set_backend" and
"BACKEND".

LIBGUESTFS_BACKEND_SETTINGS
A colon-separated list of backend-specific settings. See "BACKEND", "BACKEND
SETTINGS".

LIBGUESTFS_CACHEDIR
The location where libguestfs will cache its appliance, when using a supermin
appliance. The appliance is cached and shared between all handles which have the same
effective user ID.

If "LIBGUESTFS_CACHEDIR" is not set, then "TMPDIR" is used. If "TMPDIR" is not set,
then /var/tmp is used.

See also "LIBGUESTFS_TMPDIR", "guestfs_set_cachedir".

LIBGUESTFS_DEBUG
Set "LIBGUESTFS_DEBUG=1" to enable verbose messages. This has the same effect as
calling "guestfs_set_verbose (g, 1)".

LIBGUESTFS_HV
Set the default hypervisor (usually qemu) binary that libguestfs uses. If not set,
then the qemu which was found at compile time by the configure script is used.

AUTHORS

       Richard W.M. Jones ("rjones at redhat dot com")

COPYRIGHT

       Copyright (C) 2009-2020 Red Hat Inc.

LICENSE

       This library is free software; you can redistribute it and/or modify it under the terms of
       the GNU Lesser General Public License as published by the Free Software Foundation; either
       version 2 of the License, or (at your option) any later version.

       This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU Lesser General Public License for more details.

       You should have received a copy of the GNU Lesser General Public License along with this
       library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth
       Floor, Boston, MA 02110-1301 USA

BUGS

       To get a list of bugs against libguestfs, use this link:
       https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools

       To report a new bug against libguestfs, use this link:
       https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

       When reporting a bug, please supply:

       •   The version of libguestfs.

       •   Where you got libguestfs (eg. which Linux distro, compiled from source, etc)

       •   Describe the bug accurately and give a way to reproduce it.

       •   Run libguestfs-test-tool(1) and paste the complete, unedited output into the bug
           report.