Provided by: amanda-common_3.5.1-11_amd64 bug

NAME

       amanda-client.conf - Client configuration file for Amanda, the Advanced Maryland Automatic
       Network Disk Archiver

DESCRIPTION

       amanda-client.conf(5) is the client configuration file for Amanda. This manpage lists the
       relevant sections and parameters of this file for quick reference.

       The files <CONFIG_DIR>/amanda-client.conf and <CONFIG_DIR>/<config>/amanda-client.conf are
       loaded.

SYNTAX

       The syntax of amanda-client.conf(5) is identical to that for amanda.conf(5).

GLOBAL PARAMETERS

       conf string
           Default: Set by configure. The conf use by amrecover.

       client-username string
           Default: CLIENT_LOGIN. Similar to the parameter of the same name in amanda.conf(5),
           this specifies the username that amrecover should send when connecting to the server.
           It should match the username specified in .amandahosts on the server.

       client-port [ int | string ]
           Default: "amanda". Similar to the parameter of the same name in amanda.conf(5), this
           specifies the port to connect on the server. It can be a service name or a numeric
           port number.

       amdump-server string
           No default: Set by configure. The amanda server to connect with the amdump_client
           program.

       index-server string
           Default: Set by configure. The amindexd server amrecover will connect to.

       tape-server string
           Default: Set by configure. The amidxtaped server amrecover will connect to.

       tapedev string
           Default: Set by configure. The tapedev amrecover will use.

       auth string
           Default: "bsdtcp". Type of authorization to perform between tape server and backup
           client hosts.

           "bsd", bsd authorization with udp initial connection and one tcp connection by data
           stream.

           "bsdtcp", bsd authorization but use only one tcp connection.

           "bsdudp", like bsd, but will use only one tcp connection for all data stream.

           "krb5" to use Kerberos-V authorization.

           "local", if the client is the server, it doesn't require authencation setup.

           "rsh" to use rsh authorization.

           "ssh" to use OpenSSH authorization.

       ssh-keys string
           Default: No default. The key file the ssh auth will use, it must be the private key.
           If this parameter is not specified, then the default ssh key will be used.

       gnutar-list-dir string
           Default from configure --with-gnutar-listdir=DIR. The directory where gnutar keep its
           state file.

       mailer string
           Default found by configure. A mail program that can send mail with 'MAILER -s
           "subject" user < message_file'.

       amandates string
           Default: /etc/amandates. The file where amanda keep the last date of each dumplevel.

       connect-tries int
           Default: 3. How many times the server will try a connection.

       rep-tries int
           Default: 5. How many times amandad will resend a REP packet if it doesn't get the ACK
           packet.

       debug-days int
           Default: 3. The number of days the debug files are kept.

       debug-amandad int
           Default: 0. Debug level of the amandad process

       debug-amidxtaped int
           Default: 0. Debug level of the amidxtaped process

       debug-amindexd int
           Default: 0. Debug level of the amindexd process

       debug-amrecover int
           Default: 0. Debug level of the amrecover process

       debug-auth int
           Default: 0. Debug level of the auth module

       debug-event int
           Default: 0. Debug level of the event module

       debug-holding int
           Default: 0. Debug level of the holdingdisk module

       debug-protocol int
           Default: 0. Debug level of the protocol module

       debug-selfcheck int
           Default: 0. Debug level of the selfcheck process

       debug-sendsize int
           Default: 0. Debug level of the sendsize process

       debug-sendbackup int
           Default: 0. Debug level of the sendbackup process

       hostname string
           Default: `hostname`. The hostname (in the DLE) of the client machine

       reserved-udp-port int,int
           Default: --with-udpportrange or 512,1023. Reserved udp port that will be used
           (amrecover with bsd or bsdudp)

       reserved-tcp-port int,int
           Default: --with-low-tcpportrange or 512,1023. Reserved tcp port that will be used
           (amrecover with bsdtcp)

       unreserved-tcp-port int,int
           Default: --with-tcpportrange or 1025,65536. Unreserved tcp port that will be used
           (bsd, bsdudp)

       property string string+
           Adds a global property for this client host, useful for e.g., Application API plugins.
           The first string is the property name, the following strings are the property values

APPLICATION SECTION

       The amanda-client.conf file may define multiple types of application. The information is
       entered in a application section, which looks like this:
       define application "name" {
           application-option application-value
           ...
       }

       name is the name of this type of application.

       The setting from an application is merged with the dle setting if the name is the same as
       the client-application-name from the dle or if the client-application-name from the dle is
       not set and the name is the same as the plugin from the dle.

       The application options and values are:

       client-application-name string
           Default: none. Not use on the client.

       comment string
           Default: none. A comment string describing this application.

       plugin string
           No default. Must be set to the name of the program. This program must be in the
           $libexecdir/amanda/application directory on the client. If set, it must be the same as
           the dle plugin.

       property [append] [priority] string string+
           No default. You can set property for the application, each application have a
           different set of property. Both strings are quoted; the first string contains the name
           of the property to set, and the others contains its values.  append keyword append the
           values to the list of values for that property.  priority keyword disallow the setting
           of that property on the server.

SCRIPT SECTION

       The amanda-client.conf file may define multiple types of script. The information is
       entered in a script section, which looks like this:
       define script "name" {
           script-option script-value
           ...
       }

       name is the name of this type of script.

       The setting from a script is merged with the dle setting if the name is the same as the
       client-script-name from the dle or if the client-script-name from the dle is not set and
       the name is the same as the plugin from the dle.

       The script options and values are:

       client-script-name string
           Default: none. Not used on the client.

       comment string
           Default: none. A comment string describing this script.

       plugin string
           No default. Must be set to the name of the program. This program must be in the
           $libdir/amanda/application directory on the client. If set, it must be the same as the
           dle plugin.

       execute-where client
           Default: client. Value can't be changed.

       execute-on execute_on[,execute_on]*
           No default. When the script must be executed, you can specify many of them:

           pre-dle-amcheck
               Execute before the amcheck command for the dle.

           pre-host-amcheck
               Execute before the amcheck command for all dle for the client.

           post-dle-amcheck
               Execute after the amcheck command for the dle.

           post-host-amcheck
               Execute after the amcheck command for all dle for the client.

           pre-dle-estimate
               Execute before the estimate command for the dle.

           pre-host-estimate
               Execute before the estimate command for all dle for the client.

           post-dle-estimate
               Execute after the estimate command for the dle.

           post-host-estimate
               Execute after the estimate command for all dle for the client.

           pre-dle-backup
               Execute before the backup command for the dle.

           post-dle-backup
               Execute after the backup command for the dle.

           pre-recover
               Execute before any level is recovered.

           post-recover
               Execute after all levels are recovered.

           pre-level-recover
               Execute before each level recovery.

           post-level-recover
               Execute after each level recovery.

           inter-level-recover
               Execute between two levels of recovery.

       property [append] [priority] string string+
           No default. You can set property for the script, each script have a different set of
           property. Both strings are quoted; the first string contains the name of the property
           to set, and the others contains its values.  append keyword append the values to the
           list of values for that property.  priority keyword disallow the setting of that
           property on the server.

SEE ALSO

       amanda(8), amanda.conf(5), amcrypt(8), aespipe(1)

       The Amanda Wiki: : http://wiki.zmanda.com/

AUTHORS

       James da Silva <jds@amanda.org>

       Stefan G. Weichinger <sgw@amanda.org>