Ubuntu Manpage: fuzzel.ini - configuration file for fuzzel(1)

NAME

       fuzzel.ini - configuration file for fuzzel(1)

DESCRIPTION

       fuzzel uses the standard unix configuration format, with section based key/value pairs.
       The default section is usually unnamed, i.e. not prefixed with a [section]. However it can
       also be explicitly named [main], say if it needs to be reopened after any of the other
       sections.

       fuzzel will search for a configuration file in the following locations, in this order:

           •   XDG_CONFIG_HOME/fuzzel/fuzzel.ini (defaulting to ~/.config/fuzzel/fuzzel.ini if
               unset)
           •   XDG_CONFIG_DIRS/fuzzel/fuzzel.ini (defaulting to /etc/xdg/fuzzel/fuzzel.ini if
               unset)

       An example configuration file containing all options with their default value commented
       out will usually be installed to /etc/xdg/fuzzel/fuzzel.ini.

SECTION: main

output
Output (monitor) to display on. If unset, the compositor will choose the monitor.
Default: not set.

font
Comma separated list of fonts to use, in fontconfig format. That is, a font name
followed by a list of colon-separated options. Most noteworthy is :size=n, which is
used to set the font size. Note that the font size is also affected by the dpi-aware
option.

Examples:
• Dina:weight=bold:slant=italic
• Courier New:size=12
• Fantasque Sans Mono:fontfeatures=ss01

Default: monospace.

dpi-aware
auto, yes, or no.

When set to yes, fonts are sized using the monitor's DPI, making a font of a given
size have the same physical size, regardless of monitor.

In this mode, the monitor's scaling factor is ignored; doubling the scaling factor
will not double the font size.

When set to no, the monitor's DPI is ignored. The font is instead sized using the
monitor's scaling factor; doubling the scaling factor does double the font size.

Finally, if set to auto, fonts will be sized using the monitor's DPI if all monitors
have a scaling factor of 1. If at least one monitor as a scaling factor larger than 1
(regardless of whether the fuzzel window is mapped on that monitor or not), fonts will
be scaled using the scaling factor.

Note that this option typically does not work with bitmap fonts, which only contains a
pre-defined set of sizes, and cannot be dynamically scaled. Whichever size (of the
available ones) that best matches the DPI or scaling factor, will be used.

Also note that if the font size has been specified in pixels (:pixelsize=N, instead of
:size=N), DPI scaling (dpi-aware=yes) will have no effect (the specified pixel size
will be used as is). But, if the monitor's scaling factor is used to size the font
(dpi-aware=no), the font's pixel size will be multiplied with the scaling factor.

Default: auto.

prompt=
String to use as input prompt. Default: > .

icon-theme
Icon theme. Note that the name is case sensitive. Default: hicolor.

icons-enabled
Boolean. When enabled, application icons (from the selected icon-theme) will be
rendered. Default: yes.

fields
Comma separated list of XDG Desktop entry fields to match against.

Even though fuzzel only displays the application names, matching can (and by default
is) be done against other fields as well. Supported fields are:

• filename
• name
• generic
• exec
• categories
• keywords
• comment

Default: filename,name,generic.

password-character
Default character to use with the command line option --password. Note that this can
be overridden on the command line, by explicitly specifying the character with
--password=X. Default: *.

fuzzy
Boolean. Enables or disables fuzzy matching. Default: yes.

show-actions
Boolean. Some desktop files define "actions", in addition to the application itself.
Examples are "new window", "preferences", etc. When this option is enabled, those
actions will be listed by fuzzel. Default: no.

terminal
terminal command to use when launching 'terminal' programs, e.g. "xterm -e". Default:
$TERMINAL -e.

launch-prefix
Prefix to add before argv of executed program. Default: not set.

lines
Number of matches to show. Default: 15.

width
Window width, in characters. Border and margins are not included in this. Default: 30.

horizontal-pad
Horizontal padding, in pixels, between border and content. Default: 40.

vertical-pad
Vertical padding, in pixels, between border and content. Default: 8.

inner-pad
Vertical padding between prompt and match list, in pixels. Default: 0.

image-size-ratio
The ratio of the large image displayed when there are only a "few" matches, compared
to the full window size. Default: 0.5.

line-height
Override line height from font metrics. Default: use font metrics.

letter-spacing
Additional letter spacing. Negative values are allowed. Default: 0.

layer
Which layer to render the fuzzel window on. Valid values are top and overlay.

top renders above normal windows, but typically below fullscreen windows and lock
screens.

overlay renders on top of both normal windows and fullscreen windows. Note that the
order is undefined if several windows use the same layer. Since e.g. lock screens
typically use overlay, that means fuzzel may or may not appear on top of a lock
screen.

Default: top

exit-on-keyboard-focus-loss
Boolean. If true, exit when the fuzzel window loses keyboard focus.

Setting this to false can be useful on compositors where enabling "focus-follows-
mouse" causes fuzzel to exit as soon as the mouse is moved over another window. Sway
(<= 1.7) exhibits this behavior, for example.

Default: yes
l

SECTION: colors

       All color values are in RGBA.

       background
           Background color. Default: fdf6e3dd.

       text
           Text (foreground) color of unselected entries. Default: 657b83ff.

       match
           Text (foreground) color of the matched substring. Default: cb4b16ff.

       selection
           Background color of the selected entry. Default: eee8d5dd.

       selection-text
           Text (foreground) color of the selected entry. Default: 657b83ff.

       selection-match
           Text (foreground) color of the matched substring of the selected entry. Default:
           cb4b16ff.

       border
           Border color. Default: 002b36ff.

SECTION: border

       width
           Width of the border, in pixels. Default: 1.

       radius
           Amount of corner "roundness". Default: 10.

SECTION: dmenu

       mode
           One of text or index. Determines what fuzzel prints on stdout when an entry is
           selected: text prints the entry itself, index prints the index of the selected entry.
           Default: text.

       exit-immediately-if-empty
           Boolean. If enabled, fuzzel will not run at all (i.e. it will not open a window, and
           will not print anything on stdout) if there's nothing on stdin. Default: no.

SECTION: key-bindings

This section lets you override the default key bindings.

The general format is action=combo1...comboN. That is, each action may have one or more
key combinations, space separated. Each combination is in the form mod1+mod2+key. The
names of the modifiers and the key must be valid XKB key names.

Note that if Shift is one of the modifiers, the key must not be in upper case. For
example, Control+Shift+V will never trigger, but Control+Shift+v will.

Note that Alt is usually called Mod1.

xkbcli interactive-wayland can be useful for finding keysym names.

A key combination can only be mapped to one action. Lets say you want to bind Control+k to
next. Since this is the default shortcut for delete-line, you must unmap the default
binding. This can be done by setting action=none; e.g. delete-line=none.

cancel
Quite fuzzel without executing anythingDefault: Control+g Control+c Escape.

execute
Execute the currently selected entry. Or, in dmenu mode, print the selected entry on
stdout. Default: Return KP_Enter Control+y.

execute-or-next
If there is a single match, execute it. If there are more than one match, select the
next entry. Wraps around when the last entry has been reached. Default: Tab.

cursor-left
Moves the cursor one character to the left. Default: Left Control+b.

cursor-left-word
Moves the cursor one word to the left. Default: Control+Left Mod1+b.

cursor-right
Moves the cursor one character to the right. Default: Right Control+f.

cursor-right-word
Moves the cursor one word to the right. Default: Control+Right Mod1+f.

cursor-home
Moves the cursor to the beginning of the input. Default: Home Control+a.

cursor-end
Moves the cursor to the end of the input. Default: End Control+e.

delete-prev
Deletes the character before the cursor. Default: BackSpace.

delete-prev-word
Deletes the word before the cursor. Default: Mod1+BackSpace Control+BackSpace.

delete-next
Deletes the character after the cursor. Default: Delete.

delete-next-word
Deletes the word after the cursor. Default: Mod1+d Control+Delete.

delete-line
Deletes everything after the cursor. Default: Control+k.

prev
Select the previous entry. Does not wrap around when the first entry has been reached.
Default: Up Control+p.

prev-with-wrap
Select the previous entry. Wraps around when the first entry has been reached.
Default: ISO_Left_Tab.

prev-page
Switch to the previous page. Default: PageUp KP_PageUp.

next
Select the next entry. Does not wrap around when the last entry has been reached.
Default: Down Control+n.

next-with-wrap
Select the previous entry. Wraps around when the first entry has been reached.
Default: not bound.

next-page
Switch to the next page. Default: Page_Down KP_Page_Down.

custom-1, custom-2, ..., custom-19
Execute the currently selected entry, then exit with a non-zero exit code. custom-1
exits with exit code 10, custom-2 with 11, custom-3 with 12, and so on.

Default:
• custom-1: Mod1+1
• custom-2: Mod1+2
• custom-3: Mod1+3
• custom-4: Mod1+4
• custom-5: Mod1+5
• custom-6: Mod1+6
• custom-7: Mod1+7
• custom-8: Mod1+8
• custom-9: Mod1+9
• custom-10: Mod1+10
• custom-11: Mod1+11
• custom-12: Mod1+12
• custom-13: Mod1+13
• custom-14: Mod1+14
• custom-15: Mod1+15
• custom-16: Mod1+16
• custom-17: Mod1+17
• custom-18: Mod1+18
• custom-19: Mod1+19