Ubuntu Manpage: gosa.conf - GOsa configuration file

Provided by: gosa_2.8~git20230203.10abe45+dfsg-1_all

NAME

       gosa.conf - GOsa configuration file

DESCRIPTION

       The  gosa.conf  file  contains  configuration  information  for  GOsa,  a  powerful GPL'ed
       framework for managing accounts and systems in LDAP databases.

       The gosa.conf file is a XML style configuration  file.  It  is  parsed  by  the  GOsa  web
       application  during  log  in.  The file may contain extra tabs and newlines for formatting
       purposes.  Tag keywords in the  file  are  case-insensitive.  Comments  should  be  placed
       outside of XML tags and should be encapsulated inside of <!-- --> tags.

       The  gosa.conf  file  can  be  used  to  configure the look and feel, behaviour and access
       control of the GOsa webinterface.

Configuration layout

       The configuration has to be specified inside of the <conf> tags. It basically consists  of
       three  main parts: menu definition, definition of subdialogs (tabbed dialogs) and the main
       configuration - including information about several locations.

       Layout example:

         <?xml version="1.0"?>

         <conf configVersion="...." >
           <!-- Menu definition -->
           <menu>
           ...
           </menu>

           <!-- Tabbed dialog definitions -->
           ...

           <!-- Global setup -->
           <main>

              <!-- Location specific setups -->
              <location name="">
                ...
              </location>

           </main>

         </conf>

Menu definition

This tag defines the side and icon menu inside the interface. Defining an entry here is no
guarantie to get it shown, though. Only entries with matching ACL's get shown.

There are two types of entries inside of the menu: section and plugin

Defining a section

Open a <section> tag including a name attribute. This will show up in the menu as a new
section later on. Own entries are not handled via I18N by default. Close the </section>
tag after your plugin definitions.

Defining a plugin

Open a <plugin> tag including a class attribute. The class should be present inside your
GOsa setup - the entry will be ignored if it is not.

Plugins should have an acl entry, that allows GOsa to decide whether a user is allowed to
see a plugin or not. The acl string matches with an ACL definition done inside of GOsa.

You can override an icon by specifying the icon attribute.

For every plugin, you can provide at least seven additional hooks: precreate, preremove,
premodify postcreate, postremove, postmodify and check.

These can be used to perform special actions when a plugins gets a create, delete, modify
or check request. As a parameter, these keywords get a shell script or program to the
task.

NOTE: Any hook call using data input from users (ie: passwords) should take measures to
prevent shell injection attacks that could lead to RCE. Specifically with Passwords, Gosa
has been updated to base64 encode new_password and current_password used for all hook
calls to mitigate this risk. All other values get escapeShellArg() escaped only, which can
be exploited in certain conditions. Any hook using a password value needs to base64 decode
the value before using it.

Example password hook: to run a single command, like gam, to update passwords, in User
Password premodify:

/usr/local/bin/gam update user %uid password $(echo %new_password|base64 -d)

The create / delete / modify keywords

These keywords take a full executable path of a script. You can provide certain parameters
in form of LDAP attributes. '%uid' will pass the current user id, '%dn' the current object
dn, etc.

The script gets executed before(pre) and after(post) create, delete or modify tasks.

The check keyword

This keyword takes a full executable path of a script. Check is triggered after you press
the -I "Apply" or -I "OK" button. The complete LDAP entry as it will be written to the
LDAP is passed to your script. If parts of the entry do not match some logic of your
script, just print an error message to STDOUT. GOsa will show this message and abort the
current process of saving the entry to the LDAP.

Example menu definition:

Tabbed dialog definitions

       Tab definitions define the sub plugins which get included for certain tabbed  dialogs.  If
       you  change  something  here,  never (!) remove the primary (the first) "tab" tag which is
       defined. Most tabbed dialogs need a primary plugin.

       *tab should be looked for by a defined plugin. This one will take every tab defined  class
       and will show it inside of a tabbed dialog with the header defined in name .

       Example tabbed dialog definition:

         <grouptabs>
           <tab class="group" name="Generic" />
           <tab class="environment" name="Environment" />
           <tab class="appgroup" name="Applications" />
           <tab class="mailgroup" name="Mail" />
         </grouptabs>

Main section

The main section defines global settings, which might be overridden by each location
definition inside of this global definition.

Example layout:

<location name="Example Net"
hash="md5"
accountPrimaryAttribute="cn"
...

</location>

</main>

Generic options

forceGlobals bool

The forceGlobals statement enables PHP security checks to force register_global settings
to be switched off.

forceSSL bool

The forceSSL statement enables PHP security checks to force encrypted access to the web
interface. GOsa will try to redirect to the same URL - just with https://.

warnSSL bool

The warnSSL statement enables PHP security checks to detect non encrypted access to the
web interface. GOsa will display a warning in this case.

modificationDetectionAttribute string

The modificationDetectionAttribute statement enables GOsa to check if a entry currently
being edited has been modified from someone else outside GOsa in the meantime. It will
display an informative dialog then. It can be set to entryCSN for OpenLDAP based systems
or contextCSN for Sun DS based systems.

logging string

The logging statement enables event logging on GOsa side. Setting it to true, GOsa will
log every action a user performs via syslog. If you use rsyslog and configure it to mysql
logging, you can browse all events within GOsa.

GOsa will not log anything, if the logging value is empty or set to false.

loginAttribute string

The loginAttribute statement tells GOsa which LDAP attribute is used as the login name
during login. It can be set to uid, mail or both.

copyPaste bool

The copyPaste statement enables copy and paste for LDAP entries managed with GOsa.

enableSnapshots bool

The enableSnapshots statement enables a snapshot mechaism in GOsa. This enables you to
save certain states of entries and restore them later on.

snapshotBase dn

The snapshotBase statement defines the base where snapshots should be stored inside of the
LDAP.

snapshotURI uri

The snapshotURI variable defines the LDAP URI for the server which is used to do object
snapshots.

snapshotAdminDn dn

The snapshotAdminDn variable defines the user which is used to authenticate when
connecting to snapshotURI.

snapshotAdminPassword string

The snapshotAdminPassword variable defines the credentials which are used in combination
with snapshotAdminDn and snapshotURI in order to authenticate.

config dn

The config statement defines the LDAP base, where GOsa stores management information, such
as site wide locking and user notifications.

templateCompileDirectory path

The templateCompileDirectory statements defines the path, where the PHP templating engins
smarty should store its compiled GOsa templates for improved speed. This path needs to be
writeable by the user your webserver is running with.

timezone string

The timezone statements defines the timezone used inside of GOsa to handle date related
tasks, such as password expiery, vacation messages, etc. The timezone value should be a
unix conform timezone value like in /etc/timezone.

honourIvbbAttributes bool

The honourIvbbAttributes statement enables the IVBB mode inside of GOsa. You need the
ivbb.schema file from used by german authorities.

strictNamingRules bool

The strictNamingRules statement enables strict checking of uids and group names. If you
need characters like . or - inside of your accounts, set this to false.

allowUidProposalModification bool

The allowUidProposalModification statement enables the abilitiy to modify uid proposals
when creating a new user from a template.

honourUnitTags bool

The honourUnitTags statement enables checking of unitTag attributes when using
administrative units. If this is set to true GOsa can only see objects inside the
administrative unit a user is logged into.

rfc2307bis bool

The rfc2307bis statement enables rfc2307bis style groups in GOsa. You can use member
attributes instead of memberUid in this case. To make it work on unix systems, you've to
adjust your NSS configuration to use rfc2307bis style groups, too.

ppdPath path

The ppdPath variable defines where to store PPD files for the GOto environment plugins.

ppdGzip bool

The ppdGzip variable enables PPD file compression.

resolutions path

The resolutions variable defines a plain text file which contains additional resolutions
to be shown in the environment and system plugins.

htaccessAuthentication bool

The htaccessAuthentication variable tells GOsa to use either htaccess authentication or
LDAP authentication. This can be used if you want to use i.e. kerberos to authenticate the
users.

gosaSupportURI URI

The gosaSupportURI defines the major gosa-si server host and the password for GOsa to
connect to it. can be used if you want to use i.e. kerberos to authenticate the users.

The format is:

credentials@host:port

gosaSupportTimeout integer

The gosaSupportTimeout sets a connection timeout for all gosa-si actions. See
gosaSupportURI for details.

Browser and display options

listSummary true/false

The listSummary statement determines whether a status bar will be shown on the bottom of
GOsa generated lists, displaying a short summary of type and number of elements in the
list.

sendCompressedOutput true/false

The sendCompressedOutput statement determines whether PHP should send compressed HTML
pages to browsers or not. This may increase or decrease the performance, depending on your
network.

storeFilterSettings true/false

The storeFilterSettings statement determines whether GOsa should store filter and plugin
settings inside of a cookie.

language string

The language statement defines the default language used by GOsa. Normally GOsa
autodetects the language from the browser settings. If this is not working or you want to
force the language, just add the language code (i.e. de for german) here.

theme string

The theme statement defines what theme is used to display GOsa pages. You can install some
corporate identity like theme and/or modify certain templates to fit your needs within
themes. Take a look at the GOsa FAQ for more information.

sessionLifetime int

The sessionLifetime value defines when a session will expire in seconds. For Debian
systems, this will not work because the sessions will be removed by a cron job instead.
Please modify the value inside of your php.ini instead.

Password options

passwordMinLength integer

The passwordMinLength statement determines whether a newly entered password has to be of a
minimum length.

passwordMinDiffer integer

The passwordMinDiffer statement determines whether a newly entered password has to be
checked to have at least n different characters.

passwordProposalHook command

The passwordProposalHook can be used to let GOsa generate password proposals for you.
Whenever you change a password, you can then decide whether to use the proposal or to
manually specify a password.

/usr/bin/apg -n1

strictPasswordRules bool

The strictPasswordRules tells GOsa to check for UTF-8 characters in the supplied password.
These Characters can lead to non working authentications if UTF-8 and none UTF-8 systems
locales get mixed. The default is "true".

handleExpiredAccounts bool

The handleExpiredAccounts statement enables shadow attribute tests during the login to the
GOsa web interface and forces password renewal or account lockout.

useSaslForKerberos bool

The useSaslForKerberos statement defines the way the kerberos realm is stored in the
userPassword attribute. Set it to true in order to get {sasl}user@REALM.NET, or to false
to get {kerberos}user@REALM.NET. The latter is outdated, but may be needed from time to
time.

LDAP options

ldapMaxQueryTime integer

The ldapMaxQueryTime statement tells GOsa to stop LDAP actions if there is no answer
within the specified number of seconds.

schemaCheck bool

The schemaCheck statement enables or disables schema checking during login. It is
recommended to switch this on in order to let GOsa handle object creation more efficient.

ldapTLS bool

The ldapTLS statement enables or disables TLS operating on LDAP connections.

accountPrimaryAttribute cn/uid

The accountPrimaryAttribute option tells GOsa how to create new accounts. Possible values
are uid and cn. In the first case GOsa creates uid style DN entries:
uid=superuser,ou=staff,dc=example,dc=net
In the second case, GOsa creates cn style DN entries:
cn=Foo Bar,ou=staff,dc=example,dc=net
If you choose "cn" to be your accountPrimaryAttribute you can decide whether to include
the personal title in your dn by selecting personalTitleInDN.

accountRDN pattern

The accountRDN option tells GOsa to use a placeholder pattern for generating account RDNs.
A pattern can include attribute names prefaced by a % and normal text:
accountRDN="cn=%sn %givenName"
This will generate a RDN consisting of cn=.... filled with surname and given name of the
edited account. This option disables the use of accountPrimaryAttribute and
personalTitleInDn in your config. The latter attributes are maintained for compatibility.

personalTitleInDN bool

The personalTitleInDN option tells GOsa to include the personal title in user DNs when
accountPrimaryAttribute is set to "cn".

userRDN string

The userRDN statement defines the location where new accounts will be created inside of
defined departments. The default is ou=people.

groupsRDN string

The groupsRDN statement defines the location where new groups will be created inside of
defined departments. The default is ou=groups.

sudoRDN string

The sudoRDN statement defines the location where new groups will be created inside of
defined departments. The default is ou=groups.

sambaMachineAccountRDN string

This statement defines the location where GOsa looks for new samba workstations.

ogroupRDN string

This statement defines the location where GOsa creates new object groups inside of defined
departments. Default is ou=groups.

serverRDN string

This statement defines the location where GOsa creates new servers inside of defined
departments. Default is ou=servers.

terminalRDN string

This statement defines the location where GOsa creates new terminals inside of defined
departments. Default is ou=terminals.

workstationRDN string

This statement defines the location where GOsa creates new workstations inside of defined
departments. Default is ou=workstations.

printerRDN string

This statement defines the location where GOsa creates new printers inside of defined
departments. Default is ou=printers.

componentRDN string

This statement defines the location where GOsa creates new network components inside of
defined departments. Default is ou=components.

phoneRDN string

This statement defines the location where GOsa creates new phones inside of defined
departments. Default is ou=phones.

phoneConferenceRDN string

This statement defines the location where GOsa creates new phone conferences inside of
defined departments. Default is ou=conferences.

faxBlocklistRDN string

This statement defines the location where GOsa creates new fax blocklists inside of
defined departments. Default is ou=blocklists.

systemIncomingRDN string

This statement defines the location where GOsa looks for new systems to be joined to the
LDAP. Default is ou=incoming.

systemRDN string

This statement defines the base location for servers, workstations, terminals, phones and
components. Default is ou=systems.

ogroupRDN string

This statement defines the location where GOsa looks for object groups. Default is
ou=groups.

aclRoleRDN string

This statement defines the location where GOsa stores ACL role definitions. Default is
ou=aclroles.

phoneMacroRDN string

This statement defines the location where GOsa stores phone macros for use with the
Asterisk phone server. Default is ou=macros,ou=asterisk,ou=configs,ou=systems.

faiBaseRDN string

This statement defines the location where GOsa looks for FAI settings. Default is
ou=fai,ou=configs,ou=systems.

faiScriptRDN, faiHookRDN, faiTemplateRDN, faiVariableRDN, faiProfileRDN, faiPackageRDN,
faiPartitionRDN string

These statement define the location where GOsa stores FAI classes. The complete base for
the corresponding class is an additive of faiBaseRDN an and this value.

deviceRDN string

This statement defines the location where GOsa looks for devices. Default is ou=devices.

mimetypeRDN string

This statement defines the location where GOsa stores mime type definitions. Default is
ou=mimetypes.

applicationRDN string

This statement defines the location where GOsa stores application definitions. Default is
ou=apps.

ldapFilterNestingLimit integer

The ldapFilterNestingLimit statement can be used to speed up group handling for groups
with several hundreds of members. The default behaviour is, that GOsa will resolv the
memberUid values in a group to real names. To achieve this, it writes a single filter to
minimize searches. Some LDAP servers (namely Sun DS) simply crash when the filter gets too
big. You can set a member limit, where GOsa will stop to do these lookups.

ldapSizelimit integer

The ldapSizelimit statement tells GOsa to retrieve the specified maximum number of
results. The user will get a warning, that not all entries were shown.

ldapFollowReferrals bool

The ldapFollowReferrals statement tells GOsa to follow LDAP referrals.

Account creation options

uidNumberBase integer

The uidNumberBase statement defines where to start looking for a new free user id. This
should be synced with your adduser.conf to avoid overlapping uidNumber values between
local and LDAP based lookups. The uidNumberBase can even be dynamic. Take a look at the
baseIdHook definition below.

gidNumberBase integer

The gidNumberBase statement defines where to start looking for a new free group id. This
should be synced with your adduser.conf to avoid overlapping gidNumber values between
local and LDAP based lookups. The gidNumberBase can even be dynamic. Take a look at the
nextIdHook definition below.

idAllocationMethod traditional/pool

The idAllocationMethod statement defines how GOsa generates numeric user and group id
values. If it is set to traditional GOsa will do create a lock and perform a search for
the next free ID. The lock will be removed after the procedure completes. pool will use
the sambaUnixIdPool objectclass settings inside your LDAP. This one is unsafe, because it
does not check for concurrent LDAP access and already used IDs in this range. On the
other hand it is much faster.

minId integer

The minId statement defines the minimum assignable user or group id to avoid security
leaks with uid 0 accounts. This is used for the traditional method

uidNumberPoolMin/gidNumberPoolMin integer

The uidNumberPoolMin/gidNumberPoolMin statement defines the minimum assignable user/group
id for use with the pool method.

uidNumberPoolMax/gidNumberPoolMax integer

The uidNumberPoolMax/gidNumberPoolMax statement defines the highest assignable user/group
id for use with the pool method.

nextIdHook path

The nextIdHook statement defines a script to be called for finding the next free id for
users or groups externaly. It gets called with the current entry "dn" and the attribute to
be ID'd. It should return an integer value.

useAutoComplete bool

The useAutoComplete statement allows you to enable/disable the auto-completion mode when
searching for LDAP objects in a given container. Enable it, if you encounter long typing
delays in GOsa²'s search field.

passwordDefaultHash string

The passwordDefaultHash statement defines the default password hash to choose for new
accounts. Valid values are crypt/standard-des, crypt/md5, crypt/enhanced-des,
crypt/blowfish, crypt/sha256, crypt/sha512, md5, sha, ssha, smd5, clear and sasl. The
complete list is displayed in the "Password storage" pull-down menu in each user's
"Generic/Personal Information" view. These values will be overridden when using
templates.

idGenerator string

The idGenerator statement describes an automatic way to generate new user ids. There are
two basic functions supported - which can be combined:

a) using attributes

You can specify LDAP attributes (currently only sn and givenName) in
braces {} and add a percent sign before it. Optionally you can strip it
down to a number of characters, specified in []. I.e.

idGenerator="{%sn}-{%givenName[2-4]}"

will generate an ID using the full surname, adding a dash, and adding at
least the first two characters of givenName. If this ID is used, it'll
use up to four characters. If no automatic generation is possible, a
input box is shown.

b) using automatic id's

I.e. specifying

idGenerator="acct{id:3}"

will generate a three digits id with the next free entry appended to
"acct".

idGenerator="acct{id!1}"

will generate a one digit id with the next free entry appended to
"acct" - if needed.

idGenerator="ext{id#3}"

will generate a three digits random number appended to "ext".

Samba options

sambaSID string

The sambaSID statement defines a samba SID if not available inside of the LDAP. You can
retrieve the current sid by net getlocalsid.

sambaRidBase integer

The sambaRidBase statement defines the base id to add to ordinary sid calculations - if
not available inside of the LDAP.

sambaHashHook string

The sambaHashHook Field, if blank, samba passwords are not generated or manipulated. If
not blank, Gosa will generate an NTLM hash when a user's password is set, and will
lock/unlock this when the account is locked/unlocked using internal functions. LM hashing
is intentionally broken (sets the LM hash to a non-valid string) as the method is ancient,
broken, and rainbow tables exist for all passwords to it. IFF it is needed, set this field
to "NTLM+LM" and a valid LM hash will be set along side the NTLM one. Note that Gosa does
not use this to specify an actual Hook command, it only cares if its empty, not empty, or
contains "NTLM+LM".

Safe default: "NTLM" or leave blank.

sambaIdmapping bool

The sambaIdMapping statement tells GOsa to maintain sambaIdmapEntry objects. Depending on
your setup this can drastically improve the windows login performance.

Asterisk options

ctiHook path

The ctiHook statement defines a script to be executed if someone clicks on a phone number
inside of the addressbook plugin. It gets called with two parameters:

ctiHook $source_number $destination_number

This script can be used to do automatted dialing from the addressbook.

Mail options

mailMethod Cyrus/SendmailCyrus/Kolab/Kolab22

The mailMethod statement tells GOsa which mail method the setup should use to communicate
with a possible mail server. Leave this undefined if your mail method does not match the
predefined ones.

Cyrus maintains accounts and sieve scripts in cyrus servers. Kolab/Kolab22 is like cyrus,
but lets the kolab daemon maintain the accounts. SendmailCyrus is based on sendmail LDAP
attributes.

cyrusUseSlashes bool

The cyrusUseSlashes statement determines if GOsa should use "foo/bar" or "foo.bar"
namespaces in IMAP. Unix style is with slashes.

cyrusDeleteMailbox bool

The cyrusDeleteMailbox statement determines if GOsa should remove the mailbox from your
IMAP server or keep it after the account is deleted in LDAP.

cyrusAutocreateFolders string

The cyrusAutocreateFolders statement contains a comma separated list of personal IMAP
folders that should be created along initial account creation.

postfixRestrictionFilters path

The postfixRestrictionFilters statement defines a file to include for the postfix module
in order to display user defined restriction filters.

postfixProtocols path

The postfixProtocols statement defines a file to include for the postfix module in order
to display user defined protocols.

mailAttribute mail/uid

The mailAttribute statement determines which attribute GOsa will use to create accounts.
Valid values are mail and uid.

imapTimeout Integer (default 10)

The imapTimeout statement sets the connection timeout for imap actions.

mailFolderCreation Every mail method has its own way to create mail accounts like
share/development or shared.development@example.com which is used to identify the
accounts, set quotas or add acls.

To override the methods default account creation syntax, you can set the
mailFolderCreation option.

Examples

mailFolderCreation="%prefix%%cn%" => "shared.development"
mailFolderCreation="my-prefix.%cn%%domain%" => "my-prefix.development@example.com">

Placeholders

%prefix% The methods default prefix. (Depends on cyrusUseSlashes=FALSE/TRUE)
%cn% The groups/users cn.
%uid% The users uid.
%mail% The objects mail attribute.
%domain% The domain part of the objects mail attribute.
%mailpart% The user address part of the mail address.
%uattrib% Depends on mailAttribute="uid/mail".

mailUserCreation This attribute allows one to override the user account creation syntax,
see the mailFolderCreation description for more details.

Examples

mailUserCreation="%prefix%%uid%" => "user.foobar"
mailUserCreation=my-prefix.%uid%%domain%" => "my-prefix.foobar@example.com"

vacationTemplateDirectory path

The vacationTemplateDirectory statement sets the path where GOsa will look for vacation
message templates. Default is /etc/gosa/vacation.

Example template /etc/gosa/vacation/business.txt:

DESC:Away from desk
Hi, I'm currently away from my desk. You can contact me on
my cell phone via %mobile.

Greetings,
%givenName %sn

Debug options

displayErrors bool

The displayErrors statement tells GOsa to show PHP errors in the upper part of the screen.
This should be disabled in productive deployments, because there might be some important
passwords around.

ldapstats bool

The ldapstats statement tells GOsa to track LDAP timing statistics to the syslog. This may
help to find indexing problems or bad search filters.

ignoreAcl dn

The ignoreAcl value tells GOsa to ignore complete ACL sets for the given DN. Add your DN
here and you'll be able to restore accidentally dropped ACLs.

debugLevel integer

The debugLevel value tells GOsa to display certain information on each page load. Value is
an AND combination of the following byte values:

DEBUG_TRACE = 1

DEBUG_LDAP = 2

DEBUG_MYSQL = 4

DEBUG_SHELL = 8

DEBUG_POST = 16

DEBUG_SESSION = 32

DEBUG_CONFIG = 64

DEBUG_ACL = 128

DEBUG_SI = 256

DEBUG_MAIL = 512

LDAP resource definition

       For every location you define inside your gosa.conf, you need at least one  entry  of  the
       type referral.  These entries define the way how to connect to some directory service.

       Example:

         <referral uri="ldap://ldap.example.net/dc=example,dc=net"
                   admin="cn=gosa-admin,dc=example,dc=net"
                   password="secret" />

       uri  is  a valid LDAP uri extendet by the base this referral is responsible for.  admin is
       the DN which has the permission to write LDAP entries. And password is  the  corresponding
       password for this DN.

       You can define a set of referrals if you have several server to connect to.

Settings for the environment plugin

       In  order  to make full use of the environment plugin, you may want to define the location
       where kiosk profiles will be stored on the servers harddisk.

       This is done by the kioskPath keyword defined  within  the  environment  class  definition
       inside your gosa.conf.

       Example:

         <plugin acl="users/environment"
                 class="environment"
                 kioskPath="/var/spool/kiosk"/>

       Make sure, that this path is writeable by GOsa.

Settings for the FAI plugin

       The  FAI plugin can be used in a way that it generates branched or freezed releases inside
       your repository. Specifying the postcreate and postmodify keywords in  the  servrepository
       definition,  calls  the  provided  script as a hook when adding or removing branches. This
       script should do the rest inside of your repository.

       Example:

         <tab class="servrepository"
                 repositoryBranchHook="/opt/dak/bin/get_extra_repos"
                 postcreate="/opt/dak/bin/handle_repository '%lock_dn' '%lock_name' '%lock_type' />

       %lock_dn keeps the base DN of the source branch, %lock_name the name of the new branch and
       %lock_type is either "freeze" or "branch".

       The  repositoryBranchHook  outputs additional releases, that are not retrieveable with the
       standard GOsa/FAI methods.

       If you have only one release, or want to define a default release to  be  shown  by  GOsa,
       define    the    defaultFaiRelease="ou=sarge,ou=fai,ou=configs,ou=syst..."    within   the
       faiManagement class definition

Settings for the addressbook plugin

       The addressbook plugin can be configured to  store  the  addressbook  data  on  a  special
       location. Use the addressbookBaseDN keyword within the addressbook class definition inside
       your gosa.conf to configure this location.

       Default: ou=addressbook.

Settings for system plugins

       For  the  workstationStartup   and   terminalStartup   classes,   you   can   define   the
       systemKernelsHook  keyword.  It  can  load additional kernels that are not retrieveable by
       standard GOsa/FAI mechanisms.

       In order to make use of SNMP information, you can set the snmpCommunity  in  the  terminfo
       class definition.

       To enable the burn CD image function, you can specify the systemIsoHook in the workgeneric
       class. You will get a CD symbol in the systems list - which calls the hook if pressed.

AUTHOR

       gosa.conf(5) was written by Cajus  Pollmeier  for  the  GOsa  project  (  http://www.gosa-
       project.org ).