Provided by: waybar_0.9.17-1_amd64 bug

NAME

       waybar - configuration file

DESCRIPTION

       The configuration uses the JSON file format and is named config.

       Valid locations for this file are:

       •   $XDG_CONFIG_HOME/waybar/config~/.config/waybar/config~/waybar/config/etc/xdg/waybar/config/etc/xdg/waybar/config

       A good starting point is the default configuration found at
       https://github.com/Alexays/Waybar/blob/master/resources/config Also a minimal example
       configuration can be found on the at the bottom of this man page.

BAR CONFIGURATION

       layer
            typeof: string
            default: bottom
            Decide if the bar is displayed in front (top) of the windows or behind (bottom)
           them.

       output
            typeof: string|array
            Specifies on which screen this bar will be displayed. Exclamation mark(!) can be used
       to exclude specific output.

       position
            typeof: string
            default: top
            Bar position, can be top, bottom, left, right.

       height
            typeof: integer
            Height to be used by the bar if possible. Leave blank for a dynamic value.

       width
            typeof: integer
            Width to be used by the bar if possible. Leave blank for a dynamic value.

       modules-left
            typeof: array
            Modules that will be displayed on the left.

       modules-center
            typeof: array
            Modules that will be displayed in the center.

       modules-right
            typeof: array
           Modules that will be displayed on the right.

       margin
            typeof: string
            Margins value using the CSS format without units.

       margin-<top|left|bottom|right>
            typeof: integer
            Margins value without units.

       spacing
            typeof: integer
            Size of gaps in between of the different modules.

       name
            typeof: string
            Optional name added as a CSS class, for styling multiple waybars.

       mode
            typeof: string
            Selects one of the preconfigured display modes. This is an equivalent of the sway-
       bar(5) mode command and supports the same values: dock, hide, invisible, overlay.
            Note: hide and invisible modes may be not as useful without Sway IPC.

       modifier-reset
            typeof: string
            default: press
           Defines the timing of modifier key to reset the bar visibility. To reset the
           visibility of the bar with the press of the modifier key use press. Use release to
           reset the visibility upon the release of the modifier key and only if no other action
           happened while the key was pressed. This prevents hiding the bar when the modifier is
           used to switch a workspace, change binding mode or start a keybinding.

       exclusive
            typeof: bool
            default: true
            Option to request an exclusive zone from the compositor. Disable this to allow
       drawing application windows underneath or on top of the bar.

       fixed-center
            typeof: bool
            default: true
           Prefer fixed center position for the `modules-center` block. The center block will
           stay in the middle of the bar whenever possible. It can still be pushed around if
           other blocks need more space. When false, the center block is centered in the space
           between the left and right block.

       passthrough
            typeof: bool
            default: false
            Option to pass any pointer events to the window under the bar.
           Intended to be used with either top or overlay layers and without exclusive zone.

       gtk-layer-shell
            typeof: bool
            default: true
            Option to disable the use of gtk-layer-shell for popups.
           Only functional if compiled with gtk-layer-shell support.

       ipc
            typeof: bool
            default: false
            Option to subscribe to the Sway IPC bar configuration and visibility events and
       control waybar with swaymsg bar commands.
            Requires bar_id value from sway configuration to be either passed with the -b
       commandline argument or specified with the id option.

       id
            typeof: string
            bar_id for the Sway IPC. Use this if you need to override the value passed with the
       -b bar_id commandline argument for the specific bar instance.

       include
            typeof: string|array
            Paths to additional configuration files.
           Each file can contain a single object with any of the bar configuration options. In
           case of duplicate options, the first defined value takes precedence, i.e. including
           file -> first included file -> etc. Nested includes are permitted, but make sure to
           avoid circular imports. For a multi-bar config, the include directive affects only
           current bar configuration object.

MODULE FORMAT

       You can use PangoMarkupFormat (See
       https://developer.gnome.org/pango/stable/PangoMarkupFormat.html#PangoMarkupFormat).

       e.g.

           "format": "<span style="italic">{}</span>"

MULTIPLE INSTANCES OF A MODULE

       If you want to have a second instance of a module, you can suffix it by a '#' and a custom
       name. For example if you want a second battery module, you can add "battery#bat2" to your
       modules. To configure the newly added module, you then also add a module configuration
       with the same name.

       This could then look something like this (this is an incomplete example):

           "modules-right": ["battery", "battery#bat2"],
           "battery": {
                "bat": "BAT1"
           },
           "battery#bat2": {
                "bat": "BAT2"
           }

MINIMAL CONFIGURATION

       A minimal config file could look like this:

           {
                "layer": "top",
                "modules-left": ["sway/workspaces", "sway/mode"],
                "modules-center": ["sway/window"],
                "modules-right": ["battery", "clock"],
                "sway/window": {
                     "max-length": 50
                },
                "battery": {
                     "format": "{capacity}% {icon}",
                     "format-icons": ["", "", "", "", ""]
                },
                "clock": {
                     "format-alt": "{:%a, %d. %b  %H:%M}"
                }
           }

MULTI OUTPUT CONFIGURATION

   Limit a configuration to some outputs
           {
                "layer": "top",
                "output": "eDP-1",
                "modules-left": ["sway/workspaces", "sway/mode"],
                ...

           }

           {
                "layer": "top",
                "output": ["eDP-1", "VGA"],
                "modules-left": ["sway/workspaces", "sway/mode"],
                ...
           }

   Configuration of multiple outputs
       Don't specify an output to create multiple bars on the same screen.

           [{
                "layer": "top",
                "output": "eDP-1",
                "modules-left": ["sway/workspaces", "sway/mode"],
                ...
           }, {
                "layer": "top",
                "output": "VGA",
                "modules-right": ["clock"],
                ...
           }]

   Rotating modules
       When positioning Waybar on the left or right side of the screen, sometimes it's useful to
       be able to rotate the contents of a module so the text runs vertically. This can be done
       using the "rotate" property of the module. Example:

           {
                "clock": {
                     "rotate": 90
                }
           }

       Valid options for the "rotate" property are: 0, 90, 180 and 270.

   Grouping modules
       Module groups allow stacking modules in the direction orthogonal to the bar direction.
       When the bar is positioned on the top or bottom of the screen, modules in a group are
       stacked vertically. Likewise, when positioned on the left or right, modules in a group are
       stacked horizontally.

       A module group is defined by specifying a module named "group/some-group-name". The group
       must also be configured with a list of contained modules. Example:

           {
                "modules-right": ["group/hardware", "clock"],

                "group/hardware": {
                     "modules": [
                          "cpu",
                          "memory",
                          "battery"
                     ]
                },

                ...
           }

SUPPORTED MODULES

waybar-backlight(5)waybar-battery(5)waybar-bluetooth(5)waybar-clock(5)waybar-cpu(5)waybar-custom(5)waybar-disk(5)waybar-idle-inhibitor(5)waybar-keyboard-state(5)waybar-memory(5)waybar-mpd(5)waybar-mpris(5)waybar-network(5)waybar-pulseaudio(5)waybar-river-mode(5)waybar-river-tags(5)waybar-river-window(5)waybar-states(5)waybar-sway-mode(5)waybar-sway-scratchpad(5)waybar-sway-window(5)waybar-sway-workspaces(5)waybar-wlr-taskbar(5)waybar-wlr-workspaces(5)waybar-temperature(5)waybar-tray(5)

                                            2023-01-14                                  waybar(5)