Provided by: batmand_0.3.2+74+g2f62b17-1_amd64 
NAME
batmand - better approach to mobile ad‐hoc networking
SYNOPSIS
batmand [options]interface[interface...]
DESCRIPTION
B.A.T.M.A.N means better approach to mobile ad‐hoc networking, this is a new routing
protocol for multi‐hop ad‐hoc mesh networks. Go to https://www.open-mesh.org/ to get more
information.
The following document will explain how to use the batman daemon.
The batmand binary can be run in 2 different ways. First you need to start the daemon with
"batmand [options] interface" (daemon mode) and then you can connect to that daemon to
issue further commands with "batmand -c [options]" (client mode). Some of the options
below are always available, some are not. See the example section to get an idea.
OPTIONS
-a add announced network(s)
Add networks to the daemons list of available connections to another network(s).
This option can be used multiple times and can be used to add networks dynamically
while the daemon is running. The parameter has to be in the form of ip‐
address/netmask.
-A delete announced network(s)
Delete networks to the daemons list of available connections to another network(s).
This option can be used multiple times and can only be used while the daemon is
running. The parameter has to be in the form of ip‐address/netmask.
-b run debug connection in batch mode
The debug information are updated after a period of time by default, so if you use
"-b" it will execute once and then stop. This option is useful for script
integration of the debug output and is only available in client mode together with
"-d 1" or "-d 2".
-c connect via unix socket
Use this option to switch to client mode. Deploy it without any arguments to get
the current configuration even if changed at runtime.
-d debug level
The debug level can be set to five values.
default: 0 -> debug disabled
allowed values: 1 -> list neighbors
2 -> list gateways
3 -> observe batman
4 -> observe batman (verbose)
5 -> memory debug / cpu usage
Note that debug level 5 can be disabled at compile time.
-g gateway class
The gateway class is used to tell other nodes in the network your available
internet bandwidth. Just enter any number (optionally followed by "kbit" or "mbit")
and the daemon will guess your appropriate gateway class. Use "/" to separate the
down‐ and upload rates. You can omit the upload rate and batmand will assume an
upload of download / 5.
default: 0 -> gateway disabled
allowed values: 5000
5000kbit
5mbit
5mbit/1024
5mbit/1024kbit
5mbit/1mbit
-h short help
-H verbose help
-o originator interval in ms
A node transmits broadcast messages (we call them originator message or OGM) to
inform the neighboring nodes about it's existence. Originator interval is the time
to wait after sending one message and before sending the next message. The default
value is 1000 ms (1 second). In a mobile network, you may want to detect network
changes very quickly, so you need to send message very often, for example, use a
value of 500 ms. In a static network, you can save bandwidth by using a higher
value. This option is only available in daemon mode.
-p preferred gateway
Set the internet gateway by yourself. Note: This automatically switches your daemon
to "internet search mode" with "-r 1" unless "-r" is given. If the preferred
gateway is not found the gateway selection will use the current routing class to
choose a gateway.
-r routing class
The routing class can be set to four values ‐ it enables "internet search mode".
The daemon will choose an internet gateway based on certain criteria (unless "-p"
is specified):
default: 0 -> set no default route
allowed values: 1 -> use fast connection
2 -> use stable connection
3 -> use fast‐switch connection
XX -> use late‐switch connection
In level 1, B.A.T.M.A.N tries to find the best available connection by considering
the gateway's advertised throughput as well as the link quality towards the
gateway. In level 2, B.A.T.M.A.N compares the link quality of the internet node
and chooses the one with the best link quality. In level 3, B.A.T.M.A.N compares
the link quality of the internet node and chooses the one with the best link
quality but switches to another gateway as soon as a better connection is found.
In level XX (number between 3 and 256) B.A.T.M.A.N compares the link quality of the
internet node and chooses the one with the best link quality but switches to
another gateway as soon as this gateway has a TQ value which is XX better than the
currently selected gateway.
-s visualization server
Since no topology database is computed by the protocol an additional solution to
create topology graphs has been implemented, the vis server. Batman daemons may
send their local view about their single‐hop neighbors to the vis server. It
collects the information and provides data in a format similar to OLSR's topology
information output. Therefore existing solutions to draw topology graphs developed
for OLSR can be used to visualize mesh‐clouds using B.A.T.M.A.N.
-v print version
--disable-client-nat
Since version 0.3.2 batmand uses iptables to set the NAT rules on the gateX
interface of the batman client (-r XX). That option disables this feature of
batmand and switches the internet tunnel mode to "half tunnels" (the packets
towards the gateway are tunneled but not the packets that are coming back) unless
NAT was enabled manually. Be sure to know what you are doing! Without NAT the
gateway needs to have a route to the client or the packets will be dropped
silently.
--no-detach
Run batmand in foreground
--policy-routing-script
This option disables the policy routing feature of batmand ‐ all routing changes
are send to the script which can make use of this information or not. Firmware and
package maintainers can use this option to tightly integrate batmand into their own
routing policies. This option is only available in daemon mode.
EXAMPLES
batmand eth1 wlan0:test
Start batman daemon on interface "eth1" and on alias interface "wlan0:test"
batmand -o 2000 -a 192.168.100.1/32 -a 10.0.0.0/24 eth1
Start batman daemon on interface "eth1" with originator interval of 2000 ms while
announcing 192.168.100.1 and 10.0.0.0/24.
batmand -s 192.168.1.1 -d 1 eth1
Start batman daemon on interface "eth1", sending topology information to
192.168.1.1 and with debug level 1 (does not fork into the background).
batmand eth1 && batmand -c -d 1 -b
Start batman daemon on interface "eth1". Connect in client mode to get the debug
level 1 output once (batch mode).
batmand -g 2000kbit/500kbit eth1 && batmand -c -r 1
Start batman daemon on interface "eth1" as internet gateway. Connect in client mode
to disable the internet gateway and enable internet search mode.
AUTHOR
batmand was written by Marek Lindner <lindner_marek-at-yahoo.de>, Axel Neumann
<axel-at-open-mesh.net>, Stefan Sperling <stsp-at-stsp.in-berlin.de>, Corinna 'Elektra'
Aichele <onelektra-at-gmx.net>, Thomas Lopatic <thomas-at-lopatic.de>, Felix Fietkau
<nbd-at-nbd.name>, Ludger Schmudde <lui-at-schmudde.com>, Simon Wunderlich
<siwu-at-hrz.tu-chemnitz.de>, Andreas Langer <a.langer-at-q-dsl.de>.
This manual page was written by Wesley Tsai <wesleyboy42@gmail.com>, for the Debian
GNU/Linux system.
batmand(8)