Provided by: crmsh_4.4.0-4ubuntu1_all 
NAME
crmsh_crm_report - create report for CRM based clusters (Pacemaker)
SYNOPSIS
crm report -f {time|"cts:"testnum} [-t time] [-u user] [-l file] [-n nodes] [-E files] [-p
patt] [-L patt] [-e prog] [-MSDCZAQVsvhd] [dest]
DESCRIPTION
The crmsh_crm_report(8) is a utility to collect all information (logs, configuration
files, system information, etc) relevant to Pacemaker (CRM) over the given period of time.
OPTIONS
dest
The report name. It can also contain a path where to put the report tarball. If left
out, the tarball is created in the current directory named "crm_report-current_date",
for instance crm_report-Wed-03-Mar-2010.
-d
Don’t create the compressed tar, but leave the result in a directory.
-f { time | "cts:"testnum }
The start time from which to collect logs. The time is in the format as used by the
Date::Parse perl module. For cts tests, specify the "cts:" string followed by the test
number. This option is required.
-t time
The end time to which to collect logs. Defaults to now.
-n nodes
A list of space separated hostnames (cluster members). crm report may try to find out
the set of nodes by itself, but if it runs on the loghost which, as it is usually the
case, does not belong to the cluster, that may be difficult. Also, OpenAIS doesn’t
contain a list of nodes and if Pacemaker is not running, there is no way to find it
out automatically. This option is cumulative (i.e. use -n "a b" or -n a -n b).
-l file
Log file location. If, for whatever reason, crm report cannot find the log files, you
can specify its absolute path.
-E files
Extra log files to collect. This option is cumulative. By default, /var/log/messages
are collected along with the cluster logs.
-M
Don’t collect extra log files, but only the file containing messages from the cluster
subsystems.
-L patt
A list of regular expressions to match in log files for analysis. This option is
additive (default: "CRIT: ERROR:").
-p patt
Additional patterns to match parameter name which contain sensitive information. This
option is additive (default: "passw.*").
-Q
Quick run. Gathering some system information can be expensive. With this option, such
operations are skipped and thus information collecting sped up. The operations
considered I/O or CPU intensive: verifying installed packages content, sanitizing
files for sensitive information, and producing dot files from PE inputs.
-A
This is an OpenAIS cluster. crm report has some heuristics to find the cluster stack,
but that is not always reliable. By default, crm report assumes that it is run on a
Heartbeat cluster.
-u user
The ssh user. crm report will try to login to other nodes without specifying a user,
then as "root", and finally as "hacluster". If you have another user for
administration over ssh, please use this option.
-X ssh-options
Extra ssh options. These will be added to every ssh invocation. Alternatively, use
$HOME/.ssh/config to setup desired ssh connection options.
-S
Single node operation. Run crm report only on this node and don’t try to start slave
collectors on other members of the cluster. Under normal circumstances this option is
not needed. Use if ssh(1) does not work to other nodes.
-Z
If the destination directory exist, remove it instead of exiting (this is default for
CTS).
-V
Print the version including the last repository changeset.
-v
Increase verbosity. Normally used to debug unexpected behaviour.
-h
Show usage and some examples.
-D (obsolete)
Don’t invoke editor to fill the description text file.
-e prog (obsolete)
Your favourite text editor. Defaults to $EDITOR, vim, vi, emacs, or nano, whichever is
found first.
-C (obsolete)
Remove the destination directory once the report has been put in a tarball.
EXAMPLES
Last night during the backup there were several warnings encountered (logserver is the log
host):
logserver# crm report -f 3:00 -t 4:00 -n "node1 node2" report
collects everything from all nodes from 3am to 4am last night. The files are compressed to
a tarball report.tar.bz2.
Just found a problem during testing:
# note the current time
node1# date
Fri Sep 11 18:51:40 CEST 2009
node1# /etc/init.d/heartbeat start
node1# nasty-command-that-breaks-things
node1# sleep 120 #wait for the cluster to settle
node1# crm report -f 18:51 hb1
# if crm report can't figure out that this is corosync
node1# crm report -f 18:51 -A hb1
# if crm report can't figure out the cluster members
node1# crm report -f 18:51 -n "node1 node2" hb1
The files are compressed to a tarball hb1.tar.bz2.
INTERPRETING RESULTS
The compressed tar archive is the final product of crm report. This is one example of its
content, for a CTS test case on a three node OpenAIS cluster:
$ ls -RF 001-Restart
001-Restart:
analysis.txt events.txt logd.cf s390vm13/ s390vm16/
description.txt ha-log.txt openais.conf s390vm14/
001-Restart/s390vm13:
STOPPED crm_verify.txt hb_uuid.txt openais.conf@ sysinfo.txt
cib.txt dlm_dump.txt logd.cf@ pengine/ sysstats.txt
cib.xml events.txt messages permissions.txt
001-Restart/s390vm13/pengine:
pe-input-738.bz2 pe-input-740.bz2 pe-warn-450.bz2
pe-input-739.bz2 pe-warn-449.bz2 pe-warn-451.bz2
001-Restart/s390vm14:
STOPPED crm_verify.txt hb_uuid.txt openais.conf@ sysstats.txt
cib.txt dlm_dump.txt logd.cf@ permissions.txt
cib.xml events.txt messages sysinfo.txt
001-Restart/s390vm16:
STOPPED crm_verify.txt hb_uuid.txt messages sysinfo.txt
cib.txt dlm_dump.txt hostcache openais.conf@ sysstats.txt
cib.xml events.txt logd.cf@ permissions.txt
The top directory contains information which pertains to the cluster or event as a whole.
Files with exactly the same content on all nodes will also be at the top, with per-node
links created (as it is in this example the case with openais.conf and logd.cf).
The cluster log files are named ha-log.txt regardless of the actual log file name on the
system. If it is found on the loghost, then it is placed in the top directory. If not, the
top directory ha-log.txt contains all nodes logs merged and sorted by time. Files named
messages are excerpts of /var/log/messages from nodes.
Most files are copied verbatim or they contain output of a command. For instance, cib.xml
is a copy of the CIB found in /var/lib/heartbeat/crm/cib.xml. crm_verify.txt is output of
the crm_verify(8) program.
Some files are result of a more involved processing:
analysis.txt
A set of log messages matching user defined patterns (may be provided with the -L
option).
events.txt
A set of log messages matching event patterns. It should provide information about
major cluster motions without unnecessary details. These patterns are devised by the
cluster experts. Currently, the patterns cover membership and quorum changes, resource
starts and stops, fencing (stonith) actions, and cluster starts and stops. events.txt
is always generated for each node. In case the central cluster log was found, also
combined for all nodes.
permissions.txt
One of the more common problem causes are file and directory permissions. crm report
looks for a set of predefined directories and checks their permissions. Any issues are
reported here.
backtraces.txt
gdb generated backtrace information for cores dumped within the specified period.
sysinfo.txt
Various release information about the platform, kernel, operating system, packages,
and anything else deemed to be relevant. The static part of the system.
sysstats.txt
Output of various system commands such as ps(1), uptime(1), netstat(8), and ip(8). The
dynamic part of the system.
description.txt should contain a user supplied description of the problem, but since it is
very seldom used, it will be dropped from the future releases.
PREREQUISITES
ssh
It is not strictly required, but you won’t regret having a password-less ssh. It is
not too difficult to setup and will save you a lot of time. If you can’t have it, for
example because your security policy does not allow such a thing, or you just prefer
menial work, then you will have to resort to the semi-manual semi-automated report
generation. See below for instructions.
If you need to supply a password for your passphrase/login, then always use the -u
option.
For extra ssh(1) options, if you’re too lazy to setup $HOME/.ssh/config, use the -X
option. Do not forget to put the options in quotes.
sudo
If the ssh user (as specified with the -u option) is other than root, then crm report
uses sudo to collect the information which is readable only by the root user. In that
case it is required to setup the sudoers file properly. The user (or group to which
the user belongs) should have the following line:
<user> ALL = NOPASSWD: /usr/sbin/crm
See the sudoers(5) man page for more details.
Times
In order to find files and messages in the given period and to parse the -f and -t
options, crm report uses perl and one of the Date::Parse or Date::Manip perl modules.
Note that you need only one of these. Furthermore, on nodes which have no logs and
where you don’t run crm report directly, no date parsing is necessary. In other words,
if you run this on a loghost then you don’t need these perl modules on the cluster
nodes.
On rpm based distributions, you can find Date::Parse in perl-TimeDate and on Debian
and its derivatives in libtimedate-perl.
Core dumps
To backtrace core dumps gdb is needed and the packages with the debugging info. The
debug info packages may be installed at the time the report is created. Let’s hope
that you will need this really seldom.
TIMES
Specifying times can at times be a nuisance. That is why we have chosen to use one of the
perl modules—they do allow certain freedom when talking dates. You can either read the
instructions at the Date::Parse examples page. or just rely on common sense and try stuff
like:
3:00 (today at 3am)
15:00 (today at 3pm)
2007/9/1 2pm (September 1st at 2pm)
Tue Sep 15 20:46:27 CEST 2009 (September 15th etc)
crm report will (probably) complain if it can’t figure out what do you mean.
Try to delimit the event as close as possible in order to reduce the size of the report,
but still leaving a minute or two around for good measure.
-f is not optional. And don’t forget to quote dates when they contain spaces.
SHOULD I SEND ALL THIS TO THE REST OF INTERNET?
By default, the sensitive data in CIB and PE files is not mangled by crm report because
that makes PE input files mostly useless. If you still have no other option but to send
the report to a public mailing list and do not want the sensitive data to be included, use
the -s option. Without this option, crm report will issue a warning if it finds
information which should not be exposed. By default, parameters matching passw.* are
considered sensitive. Use the -p option to specify additional regular expressions to match
variable names which may contain information you don’t want to leak. For example:
# crm report -f 18:00 -p "user.*" -p "secret.*" /var/tmp/report
Heartbeat’s ha.cf is always sanitized. Logs and other files are not filtered.
LOGS
It may be tricky to find syslog logs. The scheme used is to log a unique message on all
nodes and then look it up in the usual syslog locations. This procedure is not foolproof,
in particular if the syslog files are in a non-standard directory. We look in /var/log
/var/logs /var/syslog /var/adm /var/log/ha /var/log/cluster. In case we can’t find the
logs, please supply their location:
# crm report -f 5pm -l /var/log/cluster1/ha-log -S /tmp/report_node1
If you have different log locations on different nodes, well, perhaps you’d like to make
them the same and make life easier for everybody.
Files starting with "ha-" are preferred. In case syslog sends messages to more than one
file, if one of them is named ha-log or ha-debug those will be favoured over syslog or
messages.
crm report supports also archived logs in case the period specified extends that far in
the past. The archives must reside in the same directory as the current log and their
names must be prefixed with the name of the current log (syslog-1.gz or
messages-20090105.bz2).
If there is no separate log for the cluster, possibly unrelated messages from other
programs are included. We don’t filter logs, but just pick a segment for the period you
specified.
MANUAL REPORT COLLECTION
So, your ssh doesn’t work. In that case, you will have to run this procedure on all nodes.
Use -S so that crm report doesn’t bother with ssh:
# crm report -f 5:20pm -t 5:30pm -S /tmp/report_node1
If you also have a log host which is not in the cluster, then you’ll have to copy the log
to one of the nodes and tell us where it is:
# crm report -f 5:20pm -t 5:30pm -l /var/tmp/ha-log -S /tmp/report_node1
OPERATION
crm report collects files and other information in a fairly straightforward way. The most
complex tasks are discovering the log file locations (if syslog is used which is the most
common case) and coordinating the operation on multiple nodes.
The instance of crm report running on the host where it was invoked is the master
instance. Instances running on other nodes are slave instances. The master instance
communicates with slave instances by ssh. There are multiple ssh invocations per run, so
it is essential that the ssh works without password, i.e. with the public key
authentication and authorized_keys.
The operation consists of three phases. Each phase must finish on all nodes before the
next one can commence. The first phase consists of logging unique messages through syslog
on all nodes. This is the shortest of all phases.
The second phase is the most involved. During this phase all local information is
collected, which includes:
• logs (both current and archived if the start time is far in the past)
• various configuration files (corosync, heartbeat, logd)
• the CIB (both as xml and as represented by the crm shell)
• pengine inputs (if this node was the DC at any point in time over the given period)
• system information and status
• package information and status
• dlm lock information
• backtraces (if there were core dumps)
The third phase is collecting information from all nodes and analyzing it. The analyzis
consists of the following tasks:
• identify files equal on all nodes which may then be moved to the top directory
• save log messages matching user defined patterns (defaults to ERRORs and CRITical
conditions)
• report if there were coredumps and by whom
• report crm_verify(8) results
• save log messages matching major events to events.txt
• in case logging is configured without loghost, node logs and events files are combined
using a perl utility
BUGS
Finding logs may at times be extremely difficult, depending on how weird the syslog
configuration. It would be nice to ask syslog-ng developers to provide a way to find out
the log destination based on facility and priority.
If you think you found a bug, please rerun with the -v option and attach the output to
bugzilla.
crm report can function in a satisfactory way only if ssh works to all nodes using
authorized_keys (without password).
There are way too many options.
AUTHOR
Written by Dejan Muhamedagic, <dejan@suse.de>
RESOURCES
ClusterLabs: http://clusterlabs.org/
Heartbeat and other Linux HA resources: http://linux-ha.org/wiki
OpenAIS: http://www.openais.org/
Corosync: http://www.corosync.org/
SEE ALSO
crm(8), Date::Parse(3)
COPYING
Copyright (C) 2007-2009 Dejan Muhamedagic. Free use of this software is granted under the
terms of the GNU General Public License (GPL).