NAME

       autodep8 - DEP-8 test control file generator

DESCRIPTION

       autodep8 will detect well-known types of packages and generate DEP-8-compliant test
       control files for them. It can be used by DEP-8 implementations to support implicit test
       control files.

USAGE

           $ autodep8                 # assumes source package in current dir
           $ autodep8 /path/to/srcpkg # path to source package

       If a known package type is detected, autodep8 exits with 0 and prints the suggested
       contents of debian/tests/control to the standard output.

       If a known package type is NOT detected, autodep8 exits with 1 and produces not output.

AUTOMATIC USAGE BY AUTOPKGTEST

       autodep8 can be automatically called by autopkgtest(1). To achieve that, you must set the
       Testsuite: field in the source package paragraph to autopkgtest-pkg-TYPE, where TYPE if
       one of package types supported by autodep8. The valid values of TYPE are listed below as
       the headings of the "EXAMPLES OF PRODUCED TEST CONTROL FILES" section.

       See the autopkgtest(1) documentation for more details.

HOW THE PACKAGE TYPE IS DETECTED

       autodep8 will first look for Testsuite: autopkgtest-pkg-TYPE field in debian/control. if
       TYPE is a known package type, then that is used. If not, each supported package type is
       tried against a set of heuristics, based on packages names, build dependencies. specific
       files under debian/, or a combination of those.

PACKAGE-SPECIFIC CONFIGURATION

       Packages can provide configuration for autodep8 in
       debian/tests/autopkgtest-pkg-${PACKAGETYPE}.conf. The file format is the following:

           # comment lines start with # and are ignored.
           # note that #'s only mark comments when in the beginning of the line
           # empty lines are also ignored

           # values are set in this format:
           var1=value1

           # spaces around the = sign are allowed
           var2 = value 2

           # backslashes allow one to set values that span multiple lines.
           # Note that the newline is removed in the final value, though
           # The following is equivalent to "multilinevar=value1, value2"
           multilinevar = value1, \
           value2

       The following configuration variables are supported:

   All package types
       extra_depends: extra test dependencies to be added to the generated tests.  Will be
       included as-is in the generated control file.

       extra_restrictions: extra restrictions to be added to the generated tests.  Will be
       included as-is in the generated control file.

       architecture: Adds restrictions on what architecture the generated tests are suitable to
       run on.  Will be included as-is in the generated control file.

   octave (debian/tests/autopkgtest-pkg-octave.conf)
       test_env: value for the DH_OCTAVE_TEST_ENV environment variable that will be used when
       invoking dh_octave_check. The default value of DH_OCTAVE_TEST_ENV is "xvfb -a".

   python (debian/tests/autopkgtest-pkg-python.conf)
       import_name: name of the module to import, if it cannot be inferred from the name of the
       Debian package. For example, `python3-xlib` is used via `import Xlib`, so `import_name =
       Xlib` would be appropriate.  This used to be configured by writing to
       `debian/tests/pkg-python/import-name`, but that is now deprecated.

COMBINING AUTO-GENERATED TESTS WITH MANUALLY SPECIFIED ONES

       If `debian/tests/control` exists, autodep8 will prepend the contents of that file to its
       own output. In that case, autodep8 will exit with a status of 0 even if no known package
       type is detected. The same applies for `debian/tests/control.autodep8`, but the use of
       that file is deprecated because the test dependencies defined there aren't processed by
       dpkg-source.

EXAMPLES OF PRODUCED TEST CONTROL FILES

   dkms (kpatch)
           Test-Command: /usr/lib/dkms/dkms-autopkgtest
           Restrictions: needs-root, allow-stderr
           Depends: @, dkms

   elpa (flycheck)
           Test-Command: dh_elpa_test --autopkgtest
           Depends: @, @builddeps@
           Restrictions: rw-build-tree

   go (prometheus)
           Test-Command: /usr/bin/dh_golang_autopkgtest
           Depends: @, @builddeps@, dh-golang
           Restrictions: allow-stderr
           Architecture: !armhf

   nodejs (node-tar)
           Test-Command: /usr/share/pkg-js-autopkgtest/runner require
           Depends: @, pkg-js-autopkgtest
           Restrictions: superficial

           Test-Command: /usr/share/pkg-js-autopkgtest/runner
           Depends: @, @builddeps@, pkg-js-autopkgtest
           Restrictions: allow-stderr, skippable

   octave (octave-signal)
           Test-Command: DH_OCTAVE_TEST_ENV="xvfb-run -a" /usr/bin/dh_octave_check --use-installed-package
           Depends: @, octave-control (>= 3.1.0), dh-octave-autopkgtest (>= 0.5.6), xauth, xvfb
           Restrictions: allow-stderr

   perl (libtest-most-perl)
           Test-Command: /usr/share/pkg-perl-autopkgtest/runner build-deps
           Depends: @, @builddeps@, pkg-perl-autopkgtest
           Features: test-name=autodep8-perl-build-deps

           Test-Command: /usr/share/pkg-perl-autopkgtest/runner runtime-deps
           Depends: @, pkg-perl-autopkgtest
           Features: test-name=autodep8-perl

           Test-Command: /usr/share/pkg-perl-autopkgtest/runner runtime-deps-and-recommends
           Depends: @, pkg-perl-autopkgtest
           Restrictions: needs-recommends
           Features: test-name=autodep8-perl-recommends

   pybuild (python-ofxclient)
           Test-Command: pybuild-autopkgtest
           Depends: @, pybuild-plugin-autopkgtest, @builddeps@,
           Restrictions: allow-stderr, skippable,
           Features: test-name=pybuild-autopkgtest

   python (python-flaky)
           Test-Command: set -e ; for py in $(py3versions -r 2>/dev/null) ; do cd "$AUTOPKGTEST_TMP" ; echo "Testing with $py:" ; $py -c "import flaky; print(flaky)" ; done
           Depends: python3-all, python3-flaky
           Restrictions: allow-stderr, superficial
           Features: test-name=autodep8-python3

           Test-Command: cd "$AUTOPKGTEST_TMP" ; pypy -c "import flaky; print flaky"
           Depends: pypy-flaky
           Restrictions: allow-stderr, superficial
           Features: test-name=autodep8-pypy

   r (r-cran-evaluate)
           Test-Command: /usr/share/dh-r/pkg-r-autopkgtest
           Depends: @, r-cran-testthat,r-cran-testthat-dbgsym,r-cran-lattice,r-cran-lattice-dbgsym,r-cran-ggplot2, pkg-r-autopkgtest
           Restrictions: allow-stderr

   ruby (ruby-sqlite3)
           Test-Command: gem2deb-test-runner --autopkgtest --check-dependencies 2>&1
           Depends: @, libsqlite3-dev,rake,ruby-hoe,ruby-minitest,ruby-redcloth, gem2deb-test-runner

COPYRIGHT

       Copyright (c) 2014 by the contributing authors. See `git log` for details.

       This program is free software: you can redistribute it and/or modify it under the terms of
       the GNU General Public License as published by the Free Software Foundation, either
       version 3 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program.
       If not, see <http://www.gnu.org/licenses/>.

                                            2022-12-07                                autodep8(1)