Ubuntu Manpage: grk_decompress - decompresses an image in the JPEG 2000 format to a different image format

Provided by: grokj2k-tools_10.0.5-1_amd64

NAME

       grk_decompress - decompresses an image in the JPEG 2000 format to a different image format

SYNOPSIS

       grk_dcompress [-i infile.j2k] [-o outfile.bmp]

DESCRIPTION

This program decompresses a JPEG 2000 image and stores it in another image format.

Supported input formats: JP2 and J2K\J2C Supported input image extensions are .jp2 and
.j2k\.j2c

Supported output formats are JPEG, BMP, PNM, PGX, PNG, RAW and TIFF Valid output image
extensions are jpg, .jpeg, .bmp, .pgm, .pgx, .pnm, .ppm, .pam, .png, .raw, .rawl, .tif and
.tiff

• For PNG the library must have libpng available.

• For TIF\\TIFF the library must have libtiff available.

• For JPG\\JPEG the library must have a libjpeg variant available.

Limitations

• Grok supports up to and including 16 bit sample precision for decompression. This is a
subset of the ISO standard, which allows up to 38 bit precision.

stdout

The decompresser can write output to stdout for the following formats: BMP,PNG, JPG, PNM,
RAW and RAWL. To enable writing to stdout, please ensure that the -o parameter is not
present in the command line, and that the -out_fmt parameter is set to one of the
supported formats listed above. Note: the verbose flag -v will be ignored in this mode,
as verbose output would corrupt the output file.

Embedded ICC Profile

If there is an embedded ICC profile in the input file, then the profile will be stored in
the output file for TIF\TIFF, JPG, BMP and PNG formats. For other formats, the profile
will be applied to the decompressed image before it is stored.

IPTC (JP2 only)

If a compressed input contains IPTC metadata, this metadata will be stored to the output
file if that output file is in TIF\TIFF format.

XMP (JP2 only)

If a compressed input contains XMP metadata, this metadata will be stored to the output
file if that output file is in TIF\\TIFF or PNG format.

Exif (JP2 only)

To transfer Exif and all other meta-data tags, use the command line argument -V described
below. To transfer the tags, Grok uses the ExifTool (https://exiftool.org/) Perl module.
ExifTool must be installed for this command line argument to work properly. Note:
transferring Exif tags may add a few hundred ms to the decompress time, depending on the
system.

Important note on command line argument notation below: the outer square braces appear for
clarity only,and should not be included in the actual command line argument. Square
braces appearing inside the outer braces should be included.

Options
-h, -help

Print a help message and exit.

-version

Print library version and exit.

-v, -verbose

Output information and warnings about decoding to console (errors are always output).
Console is silent by default.

-i, -in_file [file]

Input file. Either this argument or the -img_dir argument described below is required.
Valid input image extensions are J2K, JP2 and JPC. When using this option output file
must be specified using -o.

-o, -out_file [file]

Output file. Required when using -i option. See above for supported file types. If a
PGX filename is given, there will be as many output files as there are components: an
index starting from 0 will then be appended to the output filename, just before the pgx
extension. If a PGM filename is given and there is more than one component, then only the
first component will be written to the file.

-y, -img_dir [directory path]

Path to the folder where the compressed images are stored. Either this argument or the -i
argument described above is required. When image files are in the same directory as the
executable, this can be indicated by a dot . argument. When using this option, the output
format must be specified using -out_fmt. Output images are saved in the same folder.

-a, -out_dir [output directory]

Output directory where compressed files are stored. Only relevant when the -img_dir flag
is set. Default: same directory as specified by -img_dir.

-O, -out_fmt [format]

Output format used to decompress the code streams. Required when -img_dir option is used.
See above for supported formats.

-r, -reduce [reduce factor]

Reduce factor. Set the number of highest resolution levels to be discarded. The image
resolution is effectively divided by 2 to the power of the number of discarded levels.
The reduce factor is limited by the smallest total number of decomposition levels among
tiles.

-l, -layer [layer number]

Layer number. Set the maximum number of quality layers to decode. If there are fewer
quality layers than the specified number, all quality layers will be decoded.

-d, -region [x0,y0,x1,y1]

Decompress a region of the image. If (X,Y) is a location in the image, then it will only
be decoded if x0 <= X < x1 and y0 <= Y < y1. By default, the entire image is decoded.

There are two ways of specifying the decompress region:

1. pixel coordinates relative to image origin - region is specified in 32 bit integers.

Example: if image coordinates on canvas are (50,50,1050,1050) and region is specified as
-d 100,100,200,200, then a region with canvas coordinates (150,150,250,250) is
decompressed

2. pixel coordinates relative to image origin and scaled as floating point to unit square
[0,0,1,1]

The above example would be specified as -d 0.1,0.1,0.2,0.2

Note: there is one ambiguous case, namely -d 0,0,1,1, which could be interpreted as either
scaled or un-scaled. We treat this case as a scaled pixel region.

-m, -random_access [random access flags]

Toggle support for random access code stream markers if present : PLT,TLM or PLM;

The random access flags value passed in is an or’d combination of the following flags

1 use PLT marker if present
2 use TLM marker if present
4 use PLM marker if present

example: -m 0 would disable all three markers.

-c, -compression [compression value]

Compress output image data. Currently, this flag is only applicable when output format is
set to TIF. Possible values are {NONE, LZW,JPEG, PACKBITS. ZIP,LZMA,ZSTD,WEBP}. Default
value is NONE.

-L, -compression_level [compression level]

“Quality” of compression. Currently only implemented for PNG format. For PNG,
compression level ranges from 0 (no compression) up to 9. Grok default value is 3.

Note: PNG is always lossless, so using a different level will not affect the image
quality. It only changes the speed vs file size tradeoff.

-t, -tile_index [tile index]

Only decode tile with specified index. Index follows the JPEG2000 convention from top-
left to bottom-right. By default all tiles are decoded.

-p, -precision [component 0 precision[C|S],component 1 precision[C|S],...]

Force precision (bit depth) of components. There must be at least one value present, but
there is no limit on the number of values. The last values are ignored if too many
values. If there are fewer values than components, the last value is used for the
remaining components. If C is specified (default), values are clipped. If S is
specified, values are scaled. Specifying a 0 value indicates use of the original bit
depth.

Example:

-p 8C,8C,8c

Clip all components of a 16 bit RGB image to 8 bits.

-f, -force_rgb

Force output image color space to RGB. For TIF/TIFF or PNG output formats, the ICC
profile will be applied in this case - default behaviour is to stored the profile in the
output file, if supported.

-u, -upsample

Sub-sampled components will be upsampled to image size.

-s, -split_pnm

Split output components into different files when writing to PNM.

-X, -xml [output file name]

Store XML metadata to file, if it exists in compressed file. File name will be set to
output file name + ".xml"

-V, -transfer_exif_tags

Transfer all Exif tags to output file. Note: ExifTool (https://exiftool.org/) must be
installed for this command line argument to work correctly.

-W, -logfile [output file name]

Log to file. File name will be set to output file name

-H, -num_threads [number of threads]

Number of threads used for T1 compression. Default is total number of logical cores.

-e, -repetitions [number of repetitions]

Number of repetitions, for either a single image, or a folder of images. Default is 1. 0
signifies unlimited repetitions.

FILES

ENVIRONMENT

BUGS

       See GitHub Issues: https://github.com/GrokImageCompression/grok/issues

AUTHOR

       Grok Image Compression Inc.