Provided by: nsxiv_31-1_amd64 
NAME
nsxiv - Neo Simple X Image Viewer
SYNOPSIS
nsxiv [-abcfhiopqrtvZ0] [-A FRAMERATE] [-e WID] [-G GAMMA] [-g GEOMETRY] [-N NAME] [-n
NUM] [-S DELAY] [-s MODE] [-z ZOOM] FILE...
DESCRIPTION
nsxiv is a simple image viewer for X.
It has two modes of operation: image and thumbnail mode. The default is image mode, in
which only the current image is shown. In thumbnail mode a grid of small previews is
displayed, making it easy to choose an image to open.
Please note, that the fullscreen mode requires an EWMH/NetWM-compliant window manager.
OPTIONS
-A, --framerate FRAMERATE
Play animations with a constant frame rate set to FRAMERATE.
-a, --animate
Play animations of multi-frame images.
-b, --no-bar
Do not show statusbar at the bottom of the window.
-c, --clean-cache
Remove all orphaned cache files from the thumbnail cache directory and exit.
-e, --embed WID
Embed nsxiv's window into window whose ID is WID.
-f, --fullscreen
Start in fullscreen mode.
-G, --gamma GAMMA
Set image gamma to GAMMA (-32..32).
-g, --geometry GEOMETRY
Set window position and size. See section GEOMETRY SPECIFICATIONS of X(7) for more
information on GEOMETRY argument.
-h, --help
Print brief usage information to standard output and exit.
-i, --stdin
Read names of files to open from standard input. Also done if FILE is `-'.
-N, --class NAME
Set the resource name (WM_CLASS) of nsxiv's X window to NAME.
-n, --start-at NUM
Start at picture number NUM.
-o, --stdout
Write list of all marked files to standard output when quitting. In combination
with -i, --stdin nsxiv can be used as a visual filter/pipe.
-p, --private
Enable private mode, in which nsxiv does not write any cache or temporary files.
-q, --quiet
Be quiet, and disable warnings to standard error stream.
-r, --recursive
Search the given directories recursively for images to view.
-S, --ss-delay DELAY
Start in slideshow mode. Set the delay between images to DELAY seconds. DELAY may
be a floating-point number.
-s, --scale-mode MODE
Set scale mode according to MODE character. Supported modes are: [d]own, [f]it,
[F]ill, [w]idth, [h]eight.
-t, --thumbnail
Start in thumbnail mode.
-v, --version
Print version information to standard output and exit.
-Z, --zoom-100
The same as `-z 100'.
-z, --zoom ZOOM
Set zoom level to ZOOM percent.
-0, --null
Use NULL-separator. With this option, output of -o and file-list sent to the key-
handler and the input of -i will be separated by a NULL character.
--anti-alias[=no]
Enables anti-aliasing, when given no as an argument, disables it instead.
--alpha-layer[=no]
Enables checkerboard background for alpha layer, when given no as an argument,
disables it instead.
KEYBOARD COMMANDS
General
The following keyboard commands are available in both image and thumbnail modes:
0-9 Prefix the next command with a number (denoted via count).
q Quit nsxiv.
Return Switch to thumbnail mode / open selected image in image mode.
f Toggle fullscreen mode.
b Toggle visibility of statusbar at the bottom of the window.
Ctrl-x Send the next key to the external key-handler. See section EXTERNAL KEY HANDLER for
more information.
g Go to the first image.
G Go to the last image, or image number count.
r Reload image.
D Remove current image from file list and go to next image.
Ctrl-h, Ctrl-Left
Scroll left one screen width.
Ctrl-j, Ctrl-Down
Scroll down one screen height.
Ctrl-k, Ctrl-Up
Scroll up one screen height.
Ctrl-l, Ctrl-Right
Scroll right one screen width.
+ Zoom in.
- Zoom out.
m Mark/unmark the current image.
M Mark/unmark all images starting from the last marked/unmarked image up to the
current one.
Ctrl-m Reverse all image marks.
Ctrl-u Remove all image marks.
N Go count marked images forward.
P Go count marked images backward.
{ Decrease gamma correction by count steps.
} Increase gamma correction by count steps.
Ctrl-g Reset gamma correction.
[ Decrease brightness correction by count steps.
] Increase brightness correction by count steps.
( Decrease contrast by count steps.
) Increase contrast by count steps.
Thumbnail mode
The following keyboard commands are only available in thumbnail mode:
h, Left
Move selection left count times.
j, Down
Move selection down count times.
k, Up Move selection up count times.
l, Right
Move selection right count times.
R Reload all thumbnails.
Image mode
The following keyboard commands are only available in image mode:
Navigate image list:
n, Space
Go count images forward.
p, Backspace
Go count images backward.
[ Go count * 10 images backward.
] Go count * 10 images forward.
Ctrl-6 Go to the previously viewed image.
Handle multi-frame images:
Ctrl-n Go count frames of a multi-frame image forward.
Ctrl-p Go count frames of a multi-frame image backward.
Ctrl-a, Ctrl-Space
Play/stop animations of multi-frame images.
Panning:
h, Left
Scroll image 1/5 of window width or count pixels left.
j, Down
Scroll image 1/5 of window height or count pixels down.
k, Up Scroll image 1/5 of window height or count pixels up.
l, Right
Scroll image 1/5 of window width or count pixels right.
H Scroll to left image edge.
J Scroll to bottom image edge.
K Scroll to top image edge.
L Scroll to right image edge.
z Scroll to image center.
Zooming:
= Set zoom level to 100%, or count%.
w Set zoom level to 100%, but fit large images into window.
W Fit image to window.
F Fill image to window.
e Fit image to window width.
E Fit image to window height.
Rotation:
< Rotate image counter-clockwise by 90 degrees.
> Rotate image clockwise by 90 degrees.
? Rotate image by 180 degrees.
Flipping:
| Flip image horizontally.
_ Flip image vertically.
Miscellaneous:
a Toggle anti-aliasing.
A Toggle visibility of alpha-channel, i.e. image transparency.
s Toggle slideshow mode and/or set the delay between images to count seconds.
MOUSE COMMANDS
Thumbnail mode
The following mouse mappings are available in thumbnail mode:
Button1
Select the image. Goes into image mode if double-clicked.
Button3
Mark/unmark the image. Dragging while holding down Button3 will mark/unmark
multiple images.
Button4
Scroll up by one row.
Button5
Scroll down by one row.
Ctrl-Button4
Scroll up by one page.
Ctrl-Button5
Scroll down by one page.
Image mode
The following mouse mappings are available in image mode:
Button1
Go to the next image if the mouse cursor is in the right part of the window or to
the previous image if it is in the left part.
Ctrl-Button1
Pan the image relative to the mouse cursor.
Button2
Pan the image according to the mouse cursor position in the window while keeping
this button pressed down.
Button3
Switch to thumbnail mode.
Button4
Zoom in.
Button5
Zoom out.
CONFIGURATION
The following X resources are supported:
window.background
Color of the window background
window.foreground
Color of the window foreground
bar.font
Name of Xft bar font
bar.background
Color of the bar background. Defaults to window.background
bar.foreground
Color of the bar foreground. Defaults to window.foreground
mark.foreground
Color of the mark foreground. Defaults to window.foreground
Please see xrdb(1) on how to change them.
WINDOW TITLE
The window title can be replaced with the output of a user-provided script, which is
called by nsxiv whenever any of the relevant information changes. The path of this script
is $XDG_CONFIG_HOME/nsxiv/exec/win-title and the arguments given to it (where "Optional"
arguments might be empty) are:
$1 resolved absolute path of the current file
$2 current file number
$3 total file count
$4 image width (Optional: Disabled on thumbnails mode)
$5 image height (Optional: Disabled on thumbnails mode)
$6 current zoom (Optional: Disabled on thumbnails mode)
The term file is used rather than image as nsxiv does not precheck that the input files
are valid images. Total file count may be different from the actual count of valid images.
There is also an example script installed together with nsxiv as
/usr/share/doc/nsxiv/examples/win-title.
STATUS BAR
The information displayed on the left side of the status bar can be replaced with the
output of user-provided script.
The script that is called by nsxiv whenever an image gets loaded is located at
$XDG_CONFIG_HOME/nsxiv/exec/image-info and the arguments given to it are:
$1 path to image file (as provided by the user)
$2 image width
$3 image height
$4 fully resolved path to the image file
In thumbnail mode, the script that is called is located at
$XDG_CONFIG_HOME/nsxiv/exec/thumb-info and the arguments given to it are:
$1 path to image file (as provided by the user)
$2 empty
$3 empty
$4 fully resolved path to the image file
There are also example scripts installed together with nsxiv as
/usr/share/doc/nsxiv/examples/image-info and /usr/share/doc/nsxiv/examples/thumb-info.
EXTERNAL KEY HANDLER
Additional external keyboard commands can be defined using a handler program located in
$XDG_CONFIG_HOME/nsxiv/exec/key-handler. The handler is invoked by pressing Ctrl-x. The
next key combo is passed as its first argument. Passed via stdin are the images to act
upon: all marked images, if in thumbnail mode and at least one image has been marked,
otherwise the current image. nsxiv(1) will block until the handler terminates. It then
checks which images have been modified and reloads them.
By default nsxiv(1) will send one image per-line to stdin, however when using -0 the image
list will be NULL separated and the environment variable "$NSXIV_USING_NULL" will be set
to 1.
The key combo argument has the following form: "[C-][M-][S-]KEY", where C/M/S indicate
Ctrl/Meta(Alt)/Shift modifier states and KEY is the X keysym as listed in
/usr/include/X11/keysymdef.h without the "XK_" prefix. If KEY has an uppercase
equivalent, S-KEY is resolved into it. For instance, K replaces S-k and Scedilla replaces
S-scedilla, but S-Delete is sent as-is.
There is also an example script installed together with nsxiv as
/usr/share/doc/nsxiv/examples/key-handler.
THUMBNAIL CACHING
nsxiv stores all thumbnails under $XDG_CACHE_HOME/nsxiv/.
Use the command line option -c to remove all orphaned cache files. Additionally, run the
following command afterwards inside the cache directory to remove empty subdirectories:
find . -depth -type d -empty ! -name '.' -exec rmdir {} \;
ORIGINAL AUTHOR
Bert Muennich <ber.t at posteo.de>
CURRENT MAINTAINERS
NRK <nrk at disroot.org>
Berke Kocaoğlu <berke.kocaoglu at metu.edu.tr>
TAAPArthur <taaparthur at gmail.com>
eylles <ed.ylles1997 at gmail.com>
Stein Gunnar Bakkeby <bakkeby at gmail.com>
explosion-mental <explosion0mental at gmail.com>
mamg22 <marcomonizg at gmail.com>
LuXu
Guilherme Freire
Sam Whitehead
Kian Kasad <kian at kasad.com>
CONTRIBUTORS
For a list of contributors, run `git shortlog -s` in the nsxiv git repository.
HOMEPAGE
Website:
https://nsxiv.codeberg.page/
Source code:
https://codeberg.org/nsxiv/nsxiv
SEE ALSO
X(7), xrdb(1)
nsxiv-31 NSXIV(1)