Ubuntu Manpage: rpc.mountd - NFS mount daemon

Provided by: nfs-kernel-server_2.6.3-3ubuntu1_amd64

NAME

       rpc.mountd - NFS mount daemon

SYNOPSIS

       /usr/sbin/rpc.mountd [options]

DESCRIPTION

The rpc.mountd daemon implements the server side of the NFS MOUNT protocol, an NFS side
protocol used by NFS version 2 [RFC1094] and NFS version 3 [RFC1813]. It also responds to
requests from the Linux kernel to authenticate clients and provides details of access
permissions.

The NFS server (nfsd) maintains a cache of authentication and authorization information
which is used to identify the source of each request, and then what access permissions
that source has to any local filesystem. When required information is not found in the
cache, the server sends a request to mountd to fill in the missing information. Mountd
uses a table of information stored in /var/lib/nfs/etab and maintained by exportfs(8),
possibly based on the contents of exports(5), to respond to each request.

Mounting exported NFS File Systems
The NFS MOUNT protocol has several procedures. The most important of these are MNT (mount
an export) and UMNT (unmount an export).

A MNT request has two arguments: an explicit argument that contains the pathname of the
root directory of the export to be mounted, and an implicit argument that is the sender's
IP address.

When receiving a MNT request from an NFS client, rpc.mountd checks both the pathname and
the sender's IP address against its export table. If the sender is permitted to access
the requested export, rpc.mountd returns an NFS file handle for the export's root
directory to the client. The client can then use the root file handle and NFS LOOKUP
requests to navigate the directory structure of the export.

The rmtab File
The rpc.mountd daemon registers every successful MNT request by adding an entry to the
/var/lib/nfs/rmtab file. When receivng a UMNT request from an NFS client, rpc.mountd
simply removes the matching entry from /var/lib/nfs/rmtab, as long as the access control
list for that export allows that sender to access the export.

Clients can discover the list of file systems an NFS server is currently exporting, or the
list of other clients that have mounted its exports, by using the showmount(8) command.
showmount(8) uses other procedures in the NFS MOUNT protocol to report information about
the server's exported file systems.

Note, however, that there is little to guarantee that the contents of /var/lib/nfs/rmtab
are accurate. A client may continue accessing an export even after invoking UMNT. If the
client reboots without sending a UMNT request, stale entries remain for that client in
/var/lib/nfs/rmtab.

Mounting File Systems with NFSv4
Version 4 (and later) of NFS does not use a separate NFS MOUNT protocol. Instead mounting
is performed using regular NFS requests handled by the NFS server in the Linux kernel
(nfsd). Consequently /var/lib/nfs/rmtab is not updated to reflect any NFSv4 activity.

OPTIONS

-d kind or --debug kind
Turn on debugging. Valid kinds are: all, auth, call, general and parse.

-l or --log-auth
Enable logging of responses to authentication and access requests from nfsd. Each
response is then cached by the kernel for 30 minutes (or as set by --ttl below),
and will be refreshed after 15 minutes (half the ttl time) if the relevant client
remains active. Note that -l is equivalent to -d auth and so can be enabled in
/etc/nfs.conf with "debug = auth" in the [mountd] section.

rpc.mountd will always log authentication responses to MOUNT requests when NFSv3 is
used, but to get similar logs for NFSv4, this option is required.

-i or --cache-use-ipaddr
Normally each client IP address is matched against each host identifier (name,
wildcard, netgroup etc) found in /etc/exports and a combined identity is formed
from all matching identifiers. Often many clients will map to the same combined
identity so performing this mapping reduces the number of distinct access details
that the kernel needs to store. Specifying the -i option suppresses this mapping
so that access to each filesystem is requested and cached separately for each
client IP address. Doing this can increase the burden of updating the cache
slightly, but can make the log messages produced by the -l option easier to read.

-T or --ttl
Provide a time-to-live (TTL) for cached information given to the kernel. The
kernel will normally request an update if the information is needed after half of
this time has expired. Increasing the provided number, which is in seconds,
reduces the rate of cache update requests, and this is particularly noticeable when
these requests are logged with -l. However increasing also means that changes to
hostname to address mappings can take longer to be noticed. The default TTL is
1800 (30 minutes).

-F or --foreground
Run in foreground (do not daemonize)

-h or --help
Display usage message.

-o num or --descriptors num
Set the limit of the number of open file descriptors to num. The default is to
leave the limit unchanged.

-N mountd-version or --no-nfs-version mountd-version
This option can be used to request that rpc.mountd do not offer certain versions of
NFS. The current version of rpc.mountd can support both NFS version 2, 3 and 4. If
the either one of these version should not be offered, rpc.mountd must be invoked
with the option --no-nfs-version <vers> .

-n or --no-tcp
Don't advertise TCP for mount.

-p num or -P num or --port num
Specifies the port number used for RPC listener sockets. If this option is not
specified, rpc.mountd will try to consult /etc/services, if gets port succeed, set
the same port for all listener socket, otherwise chooses a random ephemeral port
for each listener socket.

This option can be used to fix the port value of rpc.mountd's listeners when NFS
MOUNT requests must traverse a firewall between clients and servers.

-H prog or --ha-callout prog
Specify a high availability callout program. This program receives callouts for
all MOUNT and UNMOUNT requests. This allows rpc.mountd to be used in a High
Availability NFS (HA-NFS) environment.

The callout program is run with 4 arguments. The first is mount or unmount
depending on the reason for the callout. The second will be the name of the client
performing the mount. The third will be the path that the client is mounting. The
last is the number of concurrent mounts that we believe the client has of that
path.

This callout is not needed with 2.6 and later kernels. Instead, mount the nfsd
filesystem on /proc/fs/nfsd.

-s, --state-directory-path directory
Specify a directory in which to place state information (etab and rmtab). If this
option is not specified the default of /var/lib/nfs is used.

-r, --reverse-lookup
rpc.mountd tracks IP addresses in the rmtab file. When a DUMP request is made (by
someone running showmount -a, for instance), it returns IP addresses instead of
hostnames by default. This option causes rpc.mountd to perform a reverse lookup on
each IP address and return that hostname instead. Enabling this can have a
substantial negative effect on performance in some situations.

-t N or --num-threads=N or --num-threads N
This option specifies the number of worker threads that rpc.mountd spawns. The
default is 1 thread, which is probably enough. More threads are usually only
needed for NFS servers which need to handle mount storms of hundreds of NFS mounts
in a few seconds, or when your DNS server is slow or unreliable.

-u or --no-udp
Don't advertise UDP for mounting

-V version or --nfs-version version
This option can be used to request that rpc.mountd offer certain versions of NFS.
The current version of rpc.mountd can support both NFS version 2 and the newer
version 3.

-v or --version
Print the version of rpc.mountd and exit.

-g or --manage-gids
Accept requests from the kernel to map user id numbers into lists of group id
numbers for use in access control. An NFS request will normally (except when using
Kerberos or other cryptographic authentication) contains a user-id and a list of
group-ids. Due to a limitation in the NFS protocol, at most 16 groups ids can be
listed. If you use the -g flag, then the list of group ids received from the
client will be replaced by a list of group ids determined by an appropriate lookup
on the server. Note that the 'primary' group id is not affected so a newgroup
command on the client will still be effective. This function requires a Linux
Kernel with version at least 2.6.21.

CONFIGURATION FILE

       Many of the options that can be set on the command line can  also  be  controlled  through
       values  set  in  the  [mountd] or, in some cases, the [nfsd] sections of the /etc/nfs.conf
       configuration file.  Values  recognized  in  the  [mountd]  section  include  manage-gids,
       cache-use-ipaddr,  descriptors,  port,  threads, ttl, reverse-lookup, and state-directory-
       path, ha-callout which each have the same effect as the option with the same name.

       The values recognized in the [nfsd] section include TCP, UDP, vers3, and vers4 which  each
       have the same meaning as given by rpc.nfsd(8).

TCP_WRAPPERS SUPPORT

       You can protect your rpc.mountd listeners using the tcp_wrapper library or iptables(8).

       Note that the tcp_wrapper library supports only IPv4 networking.

       Add  the hostnames of NFS peers that are allowed to access rpc.mountd to /etc/hosts.allow.
       Use the daemon name mountd even if the rpc.mountd binary has a different name.

       Hostnames used in either access file will be ignored when they can not be resolved into IP
       addresses.  For further information see the tcpd(8) and hosts_access(5) man pages.

   IPv6 and TI-RPC support
       TI-RPC  is  a  pre-requisite  for supporting NFS on IPv6.  If TI-RPC support is built into
       rpc.mountd, it attempts to start listeners  on  network  transports  marked  'visible'  in
       /etc/netconfig.   As  long as at least one network transport listener starts successfully,
       rpc.mountd will operate.

FILES

       /etc/exports             input file for exportfs, listing  exports,  export  options,  and
                                access control lists

       /var/lib/nfs/rmtab       table of clients accessing server's exports

AUTHOR

       Olaf Kirch, H. J. Lu, G. Allan Morris III, and a host of others.

                                           31 Dec 2009                              rpc.mountd(8)