Provided by: lvm2_2.03.16-2ubuntu1_amd64 bug

NAME

       vgscan — Search for all volume groups

SYNOPSIS

       vgscan
           [ option_args ]

DESCRIPTION

       vgscan scans all supported LVM block devices in the system for VGs.

USAGE

       vgscan
           [    --ignorelockingfailure ]
           [    --mknodes ]
           [    --notifydbus ]
           [    --reportformat basic|json ]
           [ COMMON_OPTIONS ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

       --commandprofile String
              The  command  profile  to  use for command configuration.  See lvm.conf(5) for more
              information about profiles.

       --config String
              Config settings for the command. These override lvm.conf(5) settings.   The  String
              arg  uses  the  same  format  as lvm.conf(5), or may use section/field syntax.  See
              lvm.conf(5) for more information about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of  messages  sent
              to the log file and/or syslog (if configured).

       --devices PV
              Restricts  the devices that are visible and accessible to the command.  Devices not
              listed will appear to be missing. This option can be repeated, or accepts  a  comma
              separated list of devices. This overrides the devices file.

       --devicesfile String
              A   file   listing   devices   that  LVM  should  use.   The  file  must  exist  in
              /etc/lvm/devices/ and is managed with the lvmdevices(8)  command.   This  overrides
              the lvm.conf(5) devices/devicesfile and devices/use_devicesfile settings.

       --driverloaded y|n
              If  set  to no, the command will not attempt to use device-mapper.  For testing and
              debugging.

       -h|--help
              Display help text.

       --ignorelockingfailure
              Allows a command to continue  with  read-only  metadata  operations  after  locking
              failures.

       --journal String
              Record  information  in  the  systemd  journal.  This information is in addition to
              information  enabled  by  the  lvm.conf  log/journal  setting.    command:   record
              information  about the command.  output: record the default command output.  debug:
              record full command debugging.

       --lockopt String
              Used to pass options for special cases  to  lvmlockd.   See  lvmlockd(8)  for  more
              information.

       --longhelp
              Display long help text.

       --mknodes
              Also  checks  the  LVM  special  files  in  /dev that are needed for active LVs and
              creates any missing ones and removes unused ones.

       --nohints
              Do not use the hints file to locate devices  for  PVs.  A  command  may  read  more
              devices  to  find  PVs  when  hints  are  not  used. The command will still perform
              standard hint file invalidation where appropriate.

       --nolocking
              Disable locking. Use  with  caution,  concurrent  commands  may  produce  incorrect
              results.

       --notifydbus
              Send  a  notification  to  D-Bus. The command will exit with an error if LVM is not
              built with support for D-Bus notification, or if the notify_dbus config setting  is
              disabled.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress  output and log messages. Overrides --debug and --verbose.  Repeat once to
              also suppress any prompts with answer 'no'.

       --reportformat basic|json
              Overrides current output format for  reports  which  is  defined  globally  by  the
              report/output_format  setting  in  lvm.conf(5).   basic is the original format with
              columns and rows.  If there is more than one report per  command,  each  report  is
              prefixed  with  the  report name for identification. json produces report output in
              JSON format. See lvmreport(7) for more information.

       -t|--test
              Run in test mode. Commands will  not  update  metadata.   This  is  implemented  by
              disabling  all  metadata  writing but nevertheless returning success to the calling
              function. This may lead to unusual error messages in multi-stage  operations  if  a
              tool relies on reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
              to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always assume the answer yes.  Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES

       String See the option description for information about the string content.

       Size[UNIT]
              Size  is  an  input  number  that accepts an optional unit.  Input units are always
              treated as base two values, regardless of capitalization, e.g.  'k'  and  'K'  both
              refer  to  1024.  The default input unit is specified by letter, followed by |UNIT.
              UNIT represents other possible input units: b|B is bytes, s|S  is  sectors  of  512
              bytes,  k|K  is  KiB,  m|M  is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
              (This should not be confused with the output control --units, where capital letters
              mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See  lvm(8)  for  information  about  environment  variables  used  by  lvm.  For example,
       LVM_VG_NAME can generally be substituted for a required VG parameter.

SEE ALSO

       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8),
       pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8),
       vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
       vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8),
       vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8),
       lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)