Provided by: di_4.52-2_amd64 
Name
di - disk information
Synopsis
di [-AacghHjklLmnPqRtZ] [-B block-size] [-d display-size] [-f format] [-I
include-fstyp-list] [-s sort-type] [-w block-width] [-W inode-width] [-x
exclude-fstyp-list] [-X debug-level] [-z zone-name] [file [...]]
mi
Description
di Displays usage information on mounted filesystems. Block values are reported in a
human readable format. If the user or group has a disk quota, the values reported are
adjusted according the quotas that apply to the user.
If file is specified, the usage information for the partition on which file is located is
printed.
Unless the -a flag is specified, the following mounted filesystems will not normally be
displayed: filesystems with total space <= 0; loopback filesystems that are duplicates of
other normally mounted filesystems (filesystem type of 'lofs' , 'none', or 'nullfs');
loopback filesystems that are part of a zone (Solaris); filesystems for which the system's
ignore flag is set; filesystems that have a device name of 'tmpfs', 'cgroup' or 'swap';
filesystems that have a device name starting with
Filesystems that the user does not have permissions to access will not be displayed at
all.
mi Displays the mounted filesystem information.
Several options may be specified to control the output of di and mi:
-A Print all fields (used for debugging). Mount points and device names are printed
at full width.
-a (compatibility: --all)
Prints all mounted devices (normally, those with 0 total space are not printed -
e.g. /dev/proc, /dev/fd).
-B block-size (compatibility: --block-size, -b)
Change the base block size from 1024 (default) to the size specified. block-size
may be one of: k - 1024 bytes, si - 1000 bytes, or a specific size.
-c (alias: --csv-output)
Comma separated values are output. The titles are output as the format string
specifiers. Totals are turned off. See also the -n flag.
-C (alias: --csv-tabs)
Values are output with tab separators. See also the -c option.
-d display-size (alias: --display-size)
Display the usage in units specified by display-size. Note that if the base block
size is SI units of 1000 bytes, the display size is calculated using those units.
display-size may be one of: 512 - POSIX, k - kilobytes, m - megabytes,
g - gigabytes, t - terabytes, p - petabytes, e - exabytes, z - zettabytes,
y - yottabytes, h - Scaled alternative 1, H - Scaled alternative 2, or a specific
value to use as the block size.
Block display sizes greater than 1024 bytes are displayed with a precision of one
decimal place after the radix.
The Scaled alternatives scale the sizes displayed and appends a suffix (e.g. 48.0k,
3.4M).
With scaled alternative 1, sizes within a line may scale to different units.
Scaled alternative 2 scales all the sizes in each individual line to the same unit
size (the largest needed).
-f format Use the specified format string format. See the Format Strings section.
-g (alias for: -dg)
Display sizes in gigabytes.
-h (alias for: -dh)
Display partition sizes in scaled alternative 1 format.
--help
Display some basic usage information.
-H (alias for: -dH; compatibility: --human-readable)
Display partition sizes in scaled alternative 2 format.
-I include-fstype-list (compatibility: -F, --type)
Include only the file system types listed in include-fstyp-list. The list is a
comma separated list of file system types. Multiple -I options may be specified.
If the 'fuse' filesystem type is specified, all fuse* filesystems will be included.
e.g. -I nfs,tmpfs or -I nfs -I tmpfs.
--inodes
Ignored. Use the -f option.
-j (alias: --json-output)
The data is output as an array of json objects. Totals are turned off. Use of
format specifiers that specify the same field will result in duplicated field
names. (e.g. p, 1, 2)
-k (alias for: -dk)
Display sizes in Kbytes.
-l (compatibility: --local)
Display only local file systems.
-L Turn off check for duplicate filesystems (loopback (lofs/none) mounts).
-m (alias for: -dm)
Display sizes in megabytes.
-n Do not print a header line above the list of file systems. Useful when parsing the
output of di.
--no-sync
Ignored.
-P (compatibility: --portability)
Output format is POSIX standard. 512 byte block size is the default. The -k
option may be used.
--print-type
Ignored. Use the -f option.
-q Disable quota checks.
-R (alias: --dont-resolve-symlinks)
Do not resolve symlinks (for mount points that have a trailing UUID).
-s sort-type
Use sort-type to sort the output. The output of di is normally sorted by mount
point. The following sort flags may be used to change the sort order: m - by mount
point (default); n - leave unsorted (as it appears in the mount table); s - by
device name; T - by total space; f - by free space; a - by available space; t - by
filesystem type; r - reverse the sort order; This will apply to all sort flags
following this sort flag.
These sort options may be combined in any order. e.g.:
di -stsrm # by type, device name, reversed mount;
di -strsrm # by type, reversed device-name, mount.
--si An alias for -dH -Bsi.
--sync Ignored.
-t (compatibility: --total)
Print a totals line below the list of file systems. Pooled filesystems (zfs,
advfs) have only the main pool added to the total. Pooled filesystems that do not
have pool information available (btrfs, apfs) will not total up correctly. It is
up to the user to exclude (using the -x option) read-only filesystems (cdfs,
iso9660), swap-based (memfs, mfs, tmpfs) filesystems and user (fuse*) filesystems.
Excluding the 'fuse' filesystem will exclude all fuse* filesystems.
-w block-width
Set the print width for block values. The default is eight.
-v Ignored.
--version
Display di's version and default format string.
-W inode-width
Set the print width for inode values. Default is seven.
-x exclude-fstype-list (compatibility: --exclude-type)
Exclude the file system types listed in exclude-fstyp-list. The list is a comma
separated list of file system types. Multiple -x options may be specified. If the
'fuse' filesystem type is excluded, all fuse* filesystems will be excluded. e.g.
-x nfs,tmpfs or -x nfs -x tmpfs.
-X level
Set the program's debugging level to debug-level.
-z zone-name
Display the filesystems for the specified zone. The zone must be visible to the
user.
-Z (alias for: -z all)
Display the filesystems for all visible zones.
Format Strings
The output of di may be specified via a format string. This string may be given either
via the -f command line option or as part of the DI_ARGS environment variable. The format
string may specify the following columns:
m Print the name of the mount point.
M Print the name of the mount point, at full length. The mount point is formatted to
the maximum width necessary for the longest mount point name.
s Print the file system name (device name or remote mount point).
S Print the file system name (device name or remote mount point), at full length.
The file system name is formatted to the maximum width necessary for the longest
file system name.
t Print the file system type.
T Print the file system type at full length. The file system type is formatted to
the maximum width necessary for the longest file system type.
Total Available
b Print the total number of megabytes on the file system.
B Print the total number of megabytes on the file system available for use by normal
users.
In Use
u Print the number of megabytes in use on the file system (actual number of megabytes
used = total - free).
c Print the number of megabytes not available for use by normal users (total -
available). Note that this calculation does work correctly the 'apfs' filesystem.
Free
f Print the number of free (unused) megabytes on the file system.
v Print the number of megabytes available for use by normal users.
Percentage Used
p Print the percentage of megabytes not available for use by normal users (number of
megabytes not available for use / total disk space).
1 Print the percentage of total megabytes in use (actual number of megabytes used /
total disk space).
2 Print the percentage of megabytes in use, BSD-style. Represents the percentage of
user-available space in use. Note that values over 100% are possible (actual
number of megabytes used / disk space available to non-root users).
Percentage Free
a Print the percentage of megabytes available for use by normal users (number of
megabytes available for use / total disk space).
3 Print the percentage of total megabytes free (actual number of megabytes free /
total disk space).
Inodes
i Print the total number of file slots (inodes) that can be created on the file
system.
U Print the number of file slots in use.
F Print the number of file slots available.
P Print the percentage of file slots in use.
Mount Information
I Print the time the filesystem was mounted. This column is not supported on all
systems.
O Print the filesystem mount options.
The default format string for di is smbuvpT.
The default format string for mi is MSTIO.
The format string may also contain any other character not listed above. The character
will be printed as is. e.g. di -f 'mbuvp|iUFP' will print the character '|' between the
disk usage and the file slot usage. The command sequence:
di -f 'mbuvp
miUFP'
will print two lines of data for each filesystem.
Examples
Various df equivalent format strings for System V release 4 are:
/usr/bin/df -v di -P -f msbuf1
/usr/bin/df -k di -dk -f sbcvpm
/usr/ucb/df di -dk -f sbuv2m
GNU df:
df di -dk -f SbuvpM -w 10
df -T di -dk -f STbuvpM -w 10
AIX df:
df di -d 512 -f Sbf1UPM -w 10
df -I di -d 512 -f Sbuf1M
df -I -M di -d 512 -f SMbuf1 -w 10
HP-UX bdf:
bdf di -d k -f Sbuv2M
bdf -i di -d k -f Sbuv2UFPM
If you like your numbers to add up/calculate the percentage correctly, try one of the
following format strings:
di -f SMbuf1T
di -f SMbcvpT
di -f SMBuv2T
Environment Variables
The DI_ARGS environment variable may be used to specify command line arguments. e.g. If
you always want gigabytes displayed, set DI_ARGS equal to "-dg". Any command line
arguments specified will override the DI_ARGS environment variable.
The DI_LOCALE_DIR environment variable may be used to specify the location of the di
program's locale message files.
The GNU df POSIXLY_CORRECT, and DF_BLOCK_SIZE and the BSD BLOCKSIZE environment variables
are honored.
Note
For filesystems that do not report available space (e.g. System V release 3), the number
of available space is set to the free space.
WARNING
Do not replace your system's df command with this program. You will in all likelihood
break your installation procedures.
See Also
df(1), fstab(5), getmnt(2), getmntinfo(2), mnttab(4), mount(1M) statfs(2), statvfs(2)
Bugs
Send bug reports to: brad.lanam.di @ gmail.com
Known Issues:
di will probably not process a zettabyte or yottabyte sized filesystem properly due to
overflow of a long long.
Website
https://diskinfo-di.sourceforge.io/
Author
This program is Copyright 1994-2021 by Brad Lanam.
Brad Lanam, Pleasant Hill, CA (brad.lanam.di @ gmail.com)
17 Jan 2013 di(1)