Provided by: micropython-mpremote_0.4.0-0ubuntu1_all 
NAME
mpremote - MicroPython remote control
SYNOPSIS
mpremote command [options] [+ command ...]
mpremote [--help]
mpremote [--version]
DESCRIPTION
The mpremote command line tool provides an integrated set of utilities to remotely
interact with and automate a MicroPython device over a serial connection.
The simplest way to use this tool is just by invoking it without any arguments:
mpremote
This command automatically detects and connects to the first available serial device and
provides an interactive REPL. Serial ports are opened in exclusive mode, so running a
second (or third, etc) instance of mpremote will connect to subsequent serial devices, if
any are available.
OPTIONS
--help Show a help message and exit.
--version
Show the program version and exit.
COMMANDS
For REPL access, running mpremote without any arguments is usually all that is needed.
mpremote also supports a set of commands given at the command line which will perform
various actions on remote MicroPython devices.
For commands that support multiple arguments (e.g. a list of files), the argument list can
be terminated with +. The full list of supported commands are:
connect [device]
Connect to a specified device via a device-name shortcut. device may be one of:
auto connect to the first available device
list list the available devices
id:serial
connect to the device with USB serial number serial (the second entry in the
output from the connect list command)
port:path
connect to the device with the given path
If the device is not specified, auto is assumed.
disconnect
Disconnects the current device. After a disconnect, auto soft-reset is enabled (see
AUTO-CONNECTION AND SOFT-RESET below).
resume Resume a previous mpremote session. This disables auto soft-reset (see AUTO-
CONNECTION AND SOFT-RESET below).
soft-reset
Perform a soft-reset of the device. This will clear out the Python heap and
restart the interpreter. It also disables auto soft-reset (see AUTO-CONNECTION AND
SOFT-RESET below).
repl [options]
Enter the REPL on the connected device. The available options are:
--capture file
to capture output of the REPL session to the given file
--inject-code string
to specify characters to inject at the REPL when Ctrl-J is pressed
--inject-file file
to specify a file to inject at the REPL when Ctrl-K is pressed
eval string
Evaluate ahd print the result of a Python expression.
exec string
Execute the given Python code.
run file
Run a script from the local filesystem.
fs subcommand
Execute filesystem commands on the device. subcommand may be:
cat files...
to show the contents of a file or files on the device
ls
ls dirs...
to list the current, or specified directories
cp [-r] src... dest
to copy files; use ":" as a prefix to specify a file on the device
rm src...
to remove files on the device
mkdir dirs...
to create directories on the device
rmdir dirs...
to remove directories on the device
touch files...
to create empty files (if they don't already exist)
edit files...
Edit a file (or files) on the device. The edit command will copy each file from the
device to a local temporary directory and then launch your editor (defined by the
environment variable $EDITOR). If the editor exits successfully, the updated file
will be copied back to the device.
mip install [options] packages...
Install packages from micropython-lib (or GitHub) using the mip tool. The
available options are:
--target path
Install under path instead of the default location (the first entry in
sys.path ending in /lib). Please note that must exist in sys.path for you
to be able to subsequently import the package.
--no-mpy
Install the source version .py files rather than .mpy).
--index URL
Use the specified URL instead of the default package index at https://
micropython.org/pi.
mount [options] local-dir
Mount a local directory on the remote device (under the path /remote). During
usage, Ctrl-D will soft-reboot and normally reconnect the mount automatically. If
the unit has a main.py running at startup however, the remount cannot occur. In
this case a raw mode soft reboot can be used: Ctrl-A Ctrl-D to reboot, then Ctrl-B
to get back to normal repl at which point the mount will be ready.
The available options are:
-l, --unsafe-links
By default an error will be raised if the device accesses a file or
directory which is outside (up one or more directory levels) the local
directory that is mounted. This option disables this check for symbolic
links, allowing the device to follow symbolic links outside of the local
directory.
umount Unmount the local directory from the remote device.
AUTO-CONNECTION AND SOFT-RESET
Connection and disconnection will be done automatically at the start and end of the
execution of the tool, if such commands are not explicitly given. Automatic connection
will search for the first available serial device. If no action is specified then the
REPL will be entered.
Once connected to a device, mpremote will automatically soft-reset the device if needed.
This clears the Python heap and restarts the interpreter, making sure that subsequent
Python code executes in a fresh environment. Auto soft-reset is performed the first time
one of the following commands are executed: mount, eval, exec, run, fs. After doing a
soft-reset for the first time, it will not be done again automatically, until a disconnect
command is issued.
Auto soft-reset behaviour can be controlled by the resume command. And the soft-reset
command can be used to perform an explicit soft reset.
SHORTCUTS
Shortcuts can be defined using the macro system. Built-in shortcuts are:
devs list available devices (shortcut for connect list)
a0, a1, a2, a3
connect to /dev/ttyACMn
u0, u1, u2, u3
connect to /dev/ttyUSBn
c0, c1, c2, c3
connect to COMn
cat, ls, cp, rm, mkdir, rmdir, touch, df
filesystem commands (mostly aliases for the fs equivalent)
reset reset the device
bootloader
make the device enter its bootloader
Any user configuration, including user-defined shortcuts, can be placed in the file
~/.config/mpremote/config.py. For example:
commands = {
"c33": "connect id:334D335C3138",
"bl": "bootloader",
"double x=4": "eval x*2", # x is an argument, with default 4
"wl_scan": ["exec", """
import network
wl = network.WLAN()
wl.active(1)
for ap in wl.scan():
print(ap)
""",],
"test": ["mount", ".", "exec", "import test"],
}
EXAMPLES
mpremote
Launch a repl on the automatically detected device.
mpremote a1
Launch a repl on the device connected to port /dev/ttyACM1 (using the built-in a1
shortcut).
mpremote connect /dev/ttyUSB0 repl
Launch a repl on the device connect to port /dev/ttyUSB0.
mpremote ls
List files on the automatically detected device.
mpremote a1 ls
List files on the device connected to port /dev/ttyACM1 (using the built-in a1
shortcut).
mpremote exec import micropython; micropython.mem_info()
Execute some Python code on the remote board to obtain various memory statistics.
mpremote eval 1/2 eval 3/4
Execute (and show the output of) two simple Python statements on the remote board.
Note that no + was required because eval accepts a single string argument.
mpremote mount .
Mount the local directory under /remote on the automatically detected device.
mpremote mount . exec "import localscript"
Mount the local directory under /remote on the MicroPython board, then import the
"localscript" module
mpremote cat boot.py
Show the contents of boot.py on the MicroPython board.
mpremote cp :main.py .
Copy the main.py file from the (remote) MicroPython board to the current (local)
directory.
mpremote cp main.py :
Copy the main.py from the current (local) directory to the (remote) MicroPython
board.
mpremote cp :a.py :b.py
On the MicroPython board, copy a.py to b.py.
mpremote cp -r dir/ :
Recursively copy the local directory dir/ to the root directory of the (remote)
MicroPython board.
mpremote cp a.py b.py : + repl
Copy the local files a.py and b.py to the root directory of the (remote)
MicroPython board, then launch a repl. Note that the + terminator is required here
as the cp command takes an arbitrary number of parameters.
mpremote mip install aioble
Install the asyncio-based wrapper for the Bluetooth API.
mpremote mip install github:org/repo@branch
Install the branch of the MicroPython package located under org/repo on GitHub.
mpremote mip install --target /flash/third-party functools
Install the functools package under the /flash/third-party directory on the
MicroPython board.
SEE ALSO
micropython(1)
mpremote(1)