Ubuntu Manpage: tpm2_incrementalselftest(1) - Request testing of specified algorithm list

NAME

       tpm2_incrementalselftest(1) - Request testing of specified algorithm list

SYNOPSIS

       tpm2_incrementalselftest [OPTIONS] ALG_SPEC_LIST

DESCRIPTION

       tpm2_incrementalselftest(1)  Request the TPM to perform testing on specified algorithm and
       print a list of algorithm scheduled to be tested OR remain to be tested but not scheduled.

       The main interest of this command is to reduce delays that might  occur  on  cryptographic
       operations as TPM must test the algorithm prior using it.

ALG_SPEC_LIST

       A  space-separated  list  of  algorithm  suite to be tested.  Algorithms should follow the
       “formatting standards”, see section “Algorithm Specifiers”.  Also, see section  “Supported
       Hash Algorithms” for a list of supported hash algorithms.

       If  ALG_SPEC_LIST  is  left  empty,  tpm2_incrementalselftest(1)  will  return the list of
       algorithms left to be tested.  Please note that in this  case  these  algorithms  are  NOT
       scheduled to be tested.

       If  ALG_SPEC_LIST  is  not  empty,  tpm2_incrementalselftest(1)  will  return  the list of
       algorithms that remains to be tested.  This list contains algorithms scheduled for testing
       AND  algorithms  that  remains  to  be  tested  and not yet scheduled.  This can occur for
       instance if all AES mode have not been already tested yet.

Output

       List of algorithms to  be  tested  (implying  scheduled)  or  remain  to  be  tested  (not
       scheduled) is also printed in YAML format.

       If  none  of  the  specified  algorithm  is printed, that means both that they are already
       tested AND that these algorithms won’t be tested again.

OPTIONS

       This tool accepts no tool specific options.

   References

Algorithm Specifiers

Options that take algorithms support “nice-names”.

There are two major algorithm specification string classes, simple and complex. Only
certain algorithms will be accepted by the TPM, based on usage and conditions.

Simple specifiers
These are strings with no additional specification data. When creating objects, non-
specified portions of an object are assumed to defaults. You can find the list of known
“Simple Specifiers” below.

Asymmetric
• rsa

• ecc

Symmetric
• aes

• camellia

• sm4

Hashing Algorithms
• sha1

• sha256

• sha384

• sha512

• sm3_256

• sha3_256

• sha3_384

• sha3_512

Keyed Hash
• hmac

• xor

Signing Schemes
• rsassa

• rsapss

• ecdsa

• ecdaa

• ecschnorr

• sm2

Asymmetric Encryption Schemes
• oaep

• rsaes

• ecdh

Modes
• ctr

• ofb

• cbc

• cfb

• ecb

Misc
• null

Complex Specifiers
Objects, when specified for creation by the TPM, have numerous algorithms to populate in
the public data. Things like type, scheme and asymmetric details, key size, etc. Below
is the general format for specifying this data: <type>:<scheme>:<symmetric-details>

Type Specifiers
This portion of the complex algorithm specifier is required. The remaining scheme and
symmetric details will default based on the type specified and the type of the object
being created.

• aes - Default AES: aes128

• aes128<mode> - 128 bit AES with optional mode (ctr|ofb|cbc|cfb|ecb). If mode is not
specified, defaults to null.

• aes192<mode> - Same as aes128<mode>, except for a 192 bit key size.

• aes256<mode> - Same as aes128<mode>, except for a 256 bit key size.

• sm4 - Default SM4: sm4128

• sm4128 or sm4_128 <mode> - 128 bit SM4 with optional mode (ctr|ofb|cbc|cfb|ecb). If
mode is not specified, defaults to null.

• ecc - Elliptical Curve, defaults to ecc256.

• ecc192 or ecc_nist_p192 - 192 bit ECC NIST curve

• ecc224 or ecc_nist_p224 - 224 bit ECC NIST curve

• ecc256 or ecc_nist_p256 - 256 bit ECC NIST curve

• ecc384 or ecc_nist_p384 - 384 bit ECC NIST curve

• ecc521 or ecc_nist_p521 - 521 bit ECC NIST curve

• ecc_sm2 or ecc_sm2_p256 - 256 bit SM2 curve

• rsa - Default RSA: rsa2048

• rsa1024 - RSA with 1024 bit keysize.

• rsa2048 - RSA with 2048 bit keysize.

• rsa3072 - RSA with 3072 bit keysize.

• rsa4096 - RSA with 4096 bit keysize.

Scheme Specifiers
Next, is an optional field, it can be skipped.

Schemes are usually Signing Schemes or Asymmetric Encryption Schemes. Most signing
schemes take a hash algorithm directly following the signing scheme. If the hash
algorithm is missing, it defaults to sha256. Some take no arguments, and some take
multiple arguments.

Hash Optional Scheme Specifiers
These scheme specifiers are followed by a dash and a valid hash algorithm, For example:
oaep-sha256.

• oaep

• ecdh

• rsassa

• rsapss

• ecdsa

• ecschnorr

• sm2

Multiple Option Scheme Specifiers
This scheme specifier is followed by a count (max size UINT16) then followed by a dash(-)
and a valid hash algorithm. * ecdaa For example, ecdaa4-sha256. If no count is
specified, it defaults to 4.

No Option Scheme Specifiers
This scheme specifier takes NO arguments. * rsaes

Symmetric Details Specifiers
This field is optional, and defaults based on the type of object being created and it’s
attributes. Generally, any valid Symmetric specifier from the Type Specifiers list should
work. If not specified, an asymmetric objects symmetric details defaults to aes128cfb.

Examples
Create an rsa2048 key with an rsaes asymmetric encryption scheme
tpm2_create -C parent.ctx -G rsa2048:rsaes -u key.pub -r key.priv

Create an ecc256 key with an ecdaa signing scheme with a count of 4 and sha384 hash
/tpm2_create -C parent.ctx -G ecc256:ecdaa4-sha384 -u key.pub -r key.priv cryptographic
algorithms ALGORITHM.

COMMON OPTIONS

       This collection of options are common to many programs and provide information  that  many
       users may expect.

       • -h,  --help=[man|no-man]:  Display the tools manpage.  By default, it attempts to invoke
         the manpager for the tool, however, on failure will output a short tool  summary.   This
         is  the  same  behavior  if  the “man” option argument is specified, however if explicit
         “man” is requested, the tool will provide errors from man on stderr.   If  the  “no-man”
         option if specified, or the manpager fails, the short options will be output to stdout.

         To  successfully  use  the  manpages feature requires the manpages to be installed or on
         MANPATH, See man(1) for more details.

       • -v, --version: Display version information for this tool, supported tctis and exit.

       • -V, --verbose: Increase the information that the tool prints to the console  during  its
         execution.  When using this option the file and line number are printed.

       • -Q, --quiet: Silence normal tool output to stdout.

       • -Z, --enable-errata: Enable the application of errata fixups.  Useful if an errata fixup
         needs  to  be  applied  to  commands  sent  to  the  TPM.   Defining   the   environment
         TPM2TOOLS_ENABLE_ERRATA is equivalent.  information many users may expect.

TCTI Configuration

The TCTI or “Transmission Interface” is the communication mechanism with the TPM. TCTIs
can be changed for communication with TPMs across different mediums.

To control the TCTI, the tools respect:

1. The command line option -T or --tcti

2. The environment variable: TPM2TOOLS_TCTI.

Note: The command line option always overrides the environment variable.

The current known TCTIs are:

• tabrmd - The resource manager, called tabrmd
(https://github.com/tpm2-software/tpm2-abrmd). Note that tabrmd and abrmd as a tcti
name are synonymous.

• mssim - Typically used for communicating to the TPM software simulator.

• device - Used when talking directly to a TPM device file.

• none - Do not initalize a connection with the TPM. Some tools allow for off-tpm options
and thus support not using a TCTI. Tools that do not support it will error when
attempted to be used without a TCTI connection. Does not support ANY options and MUST
BE presented as the exact text of “none”.

The arguments to either the command line option or the environment variable are in the
form:

<tcti-name>:<tcti-option-config>

Specifying an empty string for either the <tcti-name> or <tcti-option-config> results in
the default being used for that portion respectively.

TCTI Defaults
When a TCTI is not specified, the default TCTI is searched for using dlopen(3) semantics.
The tools will search for tabrmd, device and mssim TCTIs IN THAT ORDER and USE THE FIRST
ONE FOUND. You can query what TCTI will be chosen as the default by using the -v option
to print the version information. The “default-tcti” key-value pair will indicate which
of the aforementioned TCTIs is the default.

Custom TCTIs
Any TCTI that implements the dynamic TCTI interface can be loaded. The tools internally
use dlopen(3), and the raw tcti-name value is used for the lookup. Thus, this could be a
path to the shared library, or a library name as understood by dlopen(3) semantics.

TCTI OPTIONS

This collection of options are used to configure the various known TCTI modules available:

• device: For the device TCTI, the TPM character device file for use by the device TCTI
can be specified. The default is /dev/tpm0.

Example: -T device:/dev/tpm0 or export TPM2TOOLS_TCTI=“device:/dev/tpm0”

• mssim: For the mssim TCTI, the domain name or IP address and port number used by the
simulator can be specified. The default are 127.0.0.1 and 2321.

Example: -T mssim:host=localhost,port=2321 or export
TPM2TOOLS_TCTI=“mssim:host=localhost,port=2321”

• abrmd: For the abrmd TCTI, the configuration string format is a series of simple key
value pairs separated by a `,' character. Each key and value string are separated by a
`=' character.

• TCTI abrmd supports two keys:

1. `bus_name' : The name of the tabrmd service on the bus (a string).

2. `bus_type' : The type of the dbus instance (a string) limited to `session' and
`system'.

Specify the tabrmd tcti name and a config string of bus_name=com.example.FooBar:

\--tcti=tabrmd:bus_name=com.example.FooBar

Specify the default (abrmd) tcti and a config string of bus_type=session:

\--tcti:bus_type=session

NOTE: abrmd and tabrmd are synonymous. the various known TCTI modules.

EXAMPLES

   Request testing of RSA algorithm
              tpm2_incrementalselftest rsa

   Request testing of multiple algorithms
              tpm2_incrementalselftest rsa ecc xor aes cbc

NOTES

       Algorithm  suite specified can imply either testing the combination or the complete suite,
       depending on TPM manufacturer implementation.

       e.g : One TPM might only test AES with CTR mode if “aes ctr” is specified.  An other might
       also test complete AES mode list AND test ctr mode.

       If  an algorithm has already been tested, this command won’t permit re-executing the test.
       Only issuing tpm2_selftest(1) in full-test mode enabled will force re-testing.

Returns

       Tools can return any of the following codes:

       • 0 - Success.

       • 1 - General non-specific error.

       • 2 - Options handling error.

       • 3 - Authentication error.

       • 4 - TCTI related error.

       • 5 - Non supported scheme.  Applicable to tpm2_testparams.

BUGS

       Github Issues (https://github.com/tpm2-software/tpm2-tools/issues)

HELP

       See the Mailing List (https://lists.linuxfoundation.org/mailman/listinfo/tpm2)