mantic (1) wt.1.gz

Provided by: wiredtiger_3.2.1-1ubuntu1_amd64 bug

NAME

       wtWiredTiger command line utility
        - WiredTiger includes a command line utility, wt.

SYNOPSIS

       wt [-LRVv] [-C config] [-E secretkey ] [-h directory] command [command-specific arguments]

DESCRIPTION

       The wt tool is a command-line utility that provides access to various pieces of the
       WiredTiger functionality.

OPTIONS

       There are several global options:

       -C config
           Specify configuration strings for the wiredtiger_open function.

       -E secretkey
           Specify an encryption secret key for the wiredtiger_open function.

       -h directory
           Specify a database home directory.

       -L
           Forcibly turn off logging subsystem for debugging purposes.

       -R
           Run recovery if the underlying database is configured to do so.

       -V
           Display WiredTiger version and exit.

       -v
           Set verbose output.

       Unless otherwise described by a wt command, the wt tool exits zero on success and non-zero
       on error.

       The wt tool supports several commands. If configured in the underlying database, some
       commands will run recovery when opening the database. If the user wants to force recovery
       on any command, use the -R option. In general, commands that modify the database or tables
       will run recovery by default and commands that only read data will not run recovery.

wt alter

       Alter a table.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] alter uri configuration ...

       The uri and configuration pairs may be specified to the alter command. These configuration
       pairs can be used to modify the configuration values from those passed to the
       WT_SESSION::create call.

       The uri part of the configuration pair should match only one of the objects being altered,
       but may be a prefix of the object being matched. For example, the following two sets of
       configuration pairs are equivalent in the case of altering a single table named xxx.

       table access_pattern_hint=sequential
       table:xxx access_pattern_hint=sequential

       It's an error, however, to specify a matching prefix that matches more than a single
       object being altered.

       Multiple configuration arguments may be specified. For example, the following two sets of
       configuration pairs are equivalent:

       table:xxx access_pattern_hint=random,cache_resident=false
       table:xxx access_pattern_hint=random table:xxx cache_resident=false

wt backup

       Perform a backup of a database or set of data sources.

       The backup command performs a backup of the database, copying the underlying files to a
       specified directory, which can be subsequently opened as a WiredTiger database. See
       Backups for more information, and File permissions for specifics on the copied file
       permissions.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] backup [-t uri] directory

   Options
       The following are command-specific options for the backup command:

       -t uri
           By default, the backup command does a backup of the entire database; the -t option
           changes the backup command to do a backup of only the named data sources.

wt compact

       Compact a table.

       The compact command attempts to rewrite the specified table to consume less disk space.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] compact uri

   Options
       The compact command has no command-specific options.

wt create

       Create a table.

       The create command creates the specified uri with the specified configuration. It is
       equivalent to a call to WT_SESSION::create with the specified string arguments.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] create [-c config] uri

   Options
       The following are command-specific options for the create command:

       -c
           Include a configuration string to be passed to WT_SESSION::create.

wt drop

       Drop a table.

       The drop command drops the specified uri. It is equivalent to a call to WT_SESSION::drop
       with the 'force' configuration argument.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] drop uri

   Options
       The drop command has no command-specific options.

wt dump

       Export data in a text format.

       The dump command outputs the specified table in a portable format which can be re-loaded
       into a new table using the load command.

       See Dump Formats for details of the dump file formats.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] dump [-jrx] [-c checkpoint] [-f
       output] uri

   Options
       The following are command-specific options for the dump command:

       -c
           By default, the dump command opens the most recent version of the data source; the -c
           option changes the dump command to open the named checkpoint.

       -f
           By default, the dump command output is written to the standard output; the -f option
           re-directs the output to the specified file.

       -j
           Dump in JSON (JavaScript Object Notation) format.

       -r
           Dump in reverse order, from largest key to smallest.

       -x
           Dump all characters in a hexadecimal encoding (the default is to leave printable
           characters unencoded).

wt list

       List the tables in the database.

       By default, the list command prints out the tables stored in the database. If a URI is
       specified as an argument, only information about that data source is printed.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] list [-cv] [uri]

   Options
       The following are command-specific options for the list command:

       -c
           If the -c option is specified, the data source's checkpoints are printed in a human-
           readable format.

       -v
           If the -v option is specified, the data source's complete schema table value is
           printed.

wt load

       Load a table from dump output.

       The load command reads the standard input for data and loads it into a table, creating the
       table if it does not yet exist. The data should be the format produced by the dump
       command; see Dump Formats for details.

       By default, if the table already exists, data in the table will be overwritten by the new
       data (use the -n option to make an attempt to overwrite existing data return an error).

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] load [-ajn] [-f input] [-r name] [uri
       configuration ...]

   Options
       The following are command-specific options for the load command:

       -a
           If the -a option is specified, record number keys in the input are ignored and the
           data is appended to the data source and assigned new record number keys. The -a option
           is only applicable when loading into a column store.

       -f
           By default, the load command reads from the standard input; the -f option reads the
           input from the specified file.

       -j
           Load input in the JSON (JavaScript Object Notation) format that was created by the
           dump -j command.

       -n
           By default, input data will overwrite existing data where the key/value pair already
           exists in the data source; the -n option causes the load command to fail if there's an
           attempt to overwrite already existing data.

       -r
           By default, the load command uses the table name taken from the input; the -r option
           renames the data source.

       Additionally, uri and configuration pairs may be specified to the load command. These
       configuration pairs can be used to modify the configuration values from the dump header
       passed to the WT_SESSION::create call.

       The uri part of the configuration pair should match only one of the objects being loaded,
       but may be a prefix of the object being matched. For example, the following two sets of
       configuration pairs are equivalent in the case of loading a single table named xxx.

       table block_allocation=first
       table:xxx block_allocation=first

       It's an error, however, to specify a matching prefix that matches more than a single
       object being loaded.

       Multiple configuration arguments may be specified. For example, the following two sets of
       configuration pairs are equivalent:

       table:xxx block_allocation=first,prefix_compress=false
       table:xxx block_allocation=first table:xxx prefix_compress=false

wt loadtext

       Load text into a table.

       The loadtext command reads the standard input for text and loads it into a table. The
       input data should be printable characters, with newline delimiters for each key or value.

       The loadtext command does not create the object if it does not yet exist.

       In the case of inserting values into a column-store table, each value is appended to the
       table; in the case of inserting values into a row-store table, lines are handled in pairs,
       where the first line is the key and the second line is the value. If the row-store table
       already exists, data in the table will be overwritten by the new data.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] loadtext [-f input] uri

   Options
       The following are command-specific options for the loadtext command:

       -f
           By default, the loadtext command reads from the standard input; the -f option reads
           the input from the specified file.

wt printlog

       Display the database log.

       The printlog command outputs the database log.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] printlog [-x] [-f output]

   Options
       The following are command-specific options for the printlog command:

       -f
           By default, the printlog command output is written to the standard output; the -f
           option re-directs the output to the specified file.

       -x
           Keys and value items in the log are printed in hex format in addition to the default
           string format.

wt read

       Read records from a table.

       The read command prints out the records associated with the specified keys from the
       specified data source. The data source must be configured with string or record number
       keys and string values.

       The read command exits non-zero if a specified record is not found.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] read uri key ...

   Options
       The read command has no command-specific options.

wt rename

       Rename a table.

       The rename command renames the specified table.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] rename uri name

   Options
       The rename command has no command-specific options.

wt salvage

       Recover data from a corrupted table.

       The salvage command salvages the specified data source, discarding any data that cannot be
       recovered. Underlying files are re-written in place, overwriting the original file
       contents.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] salvage [-F] uri

   Options
       The following are command-specific options for the salvage command:

       -F
           By default, salvage will refuse to salvage tables that fail basic tests (for example,
           tables that don't appear to be in a WiredTiger format). The -F option forces the
           salvage of the table, regardless.

wt stat

       Display database or data source statistics.

       The stat command outputs run-time statistics for the WiredTiger engine, or, if specified,
       for the URI on the command-line.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] stat [-f] [uri]

   Options
       The following are command-specific options for the stat command:

       -f
           Include only 'fast' statistics in the output (equivalent to passing statistics=(fast))
           to WT_SESSION::open_cursor.

wt truncate

       Truncate a table, removing all data.

       The truncate command truncates the specified uri. It is equivalent to a call to
       WT_SESSION::truncate with no start or stop specified.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] truncate uri

   Options
       The truncate command has no command-specific options.

wt upgrade

       Upgrade a table.

       The upgrade command upgrades the specified table, exiting success if the data source is
       up-to-date, and failure if the data source cannot be upgraded.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] upgrade uri

   Options
       The upgrade command has no command-specific options.

wt verify

       Check the structural integrity of a table.

       The verify command verifies the specified table, exiting success if the data source is
       correct, and failure if the data source is corrupted.

   Synopsis
       wt [-RVv] [-C config] [-E secretkey ] [-h directory] verify uri

   Options
       The verify command has no command-specific options.

wt write

       Write records to a table.

       The write command stores records into the specified data source. The data source must be
       configured with string or record number keys and string values.

       If the write command is called with the -a option, each command-line argument is a single
       value to be appended to the specified column-store data source. If the write command is
       not called with the -a option, the command-line arguments are key/value pairs.

       Attempting to overwrite an already existing record will fail.

   Synopsis
        wt [-RVv] [-C config] [-E secretkey ] [-h directory] write -a uri value ...
        wt [-RVv] [-C config] [-E secretkey ] [-h directory] write [-o] uri key value ...

   Options
       The following are command-specific options for the write command:

       -a
           Append each value as a new record in the data source.

       -o
           By default, attempting to overwrite an already existing record will fail. The -o
           option changes write to overwrite previously existing records.