Provided by: fim_0.6~rc1.real-1_amd64 
NAME
fimrc - fim configuration file and language reference
SYNOPSIS
~/.fimrc
/usr/local/etc/fimrc
fim --script-from-stdin [ {options} ] < {scriptfile}
fim --execute-script {scriptfile} [ {options} ]
fim --execute-commands {commands} [ {options} ]
fim --final-commands {commands} [ {options} ]
fim --write-scriptout {scriptfile} [ {options} ]
fim --write-scriptout /dev/stdout [ {options} ]
fim --chars-press :{commands} [ {options} ]
fim --chars-press :{commands} --chars-press '' [ {options} ]
DESCRIPTION
This page explains the fim language, which is used for the fimrc configuration files,
{scriptfile}s, or {commands} passed via command line {options}. This language can be used
to issue commands (or programs) from the internal program command line accessed
interactively through the ":" key (or rather, the key code specified by the "_console_key"
variable). One may exit from command line mode by pressing the Enter key on an empty line
(a non empty command line would be submitted for execution), or the Esc key (only in SDL
mode). The general form of a fim command/program is shown in the next section.
FIM LANGUAGE GRAMMAR
This section specifies the grammar of the fim language.
Language elements surrounded by a single quote ("'") are literals.
Warning: at the present state, this grammar has conflicts. A future release shall fix
them.
program: %empty
| statement_list
statement_list: statement
| statement ';' statement_list
| non_atomic_statements_block statement_list
| statements_block
non_atomic_statements_block: '{' statement_list '}'
| INTEGER '{' statement_list '}'
| conditional_statement
statements_block: atomic_statements_block
| non_atomic_statements_block
conditional_statement: if_statement
| loop_statement
if_statement: 'if' '(' expression ')' statements_block
| 'if' '(' expression ')' statements_block 'else' statements_block
loop_statement: 'while' '(' expression ')' statements_block
| 'do' statements_block 'while' '(' expression ')'
atomic_statements_block: statement ';'
| statement ';' ';'
| statement ';' ';' ';'
statement: '!' arguments
| INTEGER ',' INTEGER IDENTIFIER
| INTEGER ',' INTEGER IDENTIFIER arguments
| INTEGER IDENTIFIER
| SLASH_AND_REGEXP
| '+' UNQUOTED_FLOAT '%'
| '+' QUOTED_FLOAT '%'
| '+' INTEGER '%'
| '*' UNQUOTED_FLOAT
| '*' QUOTED_FLOAT
| '*' INTEGER
| UNQUOTED_FLOAT '%'
| QUOTED_FLOAT '%'
| INTEGER '%'
| '-' UNQUOTED_FLOAT '%'
| '-' QUOTED_FLOAT '%'
| '-' INTEGER '%'
| INTEGER
| '-' INTEGER
| IDENTIFIER
| IDENTIFIER FILE_PATH
| IDENTIFIER arguments
| INTEGER IDENTIFIER arguments
| IDENTIFIER '=' expression
arguments: expression
| expression arguments
expression: '(' expression ')'
| expression '.' expression
| '!' expression
| expression '%' expression
| expression '+' expression
| expression '-' expression
| expression '*' expression
| expression '/' expression
| expression '<' expression
| expression '>' expression
| expression '||' expression
| expression BOR expression
| expression '&&' expression
| expression BAND expression
| expression '>=' expression
| expression '<=' expression
| expression '!=' expression
| expression '==' expression
| expression '=~' expression
| '-' expression
| IDENTIFIER
| INTEGER
| QUOTED_FLOAT
| UNQUOTED_FLOAT
| STRING
A STRING can be either a single quoted string or a double quoted string. A floating point
number can be either unquoted (UNQUOTED_FLOAT) or quoted (QUOTED_FLOAT). A QUOTED_FLOAT
is a floating point number, either single ("'") or double (""") quoted. An INTEGER shall
be an unsigned integer number. An IDENTIFIER shall be one of the valid fim commands (see
COMMANDS REFERENCE ) or a valid alias. A VARIABLE shall be an already declared or
undeclared variable identifier (see VARIABLES REFERENCE ) or a valid alias, created using
the alias command. The "=~" operator treats the right expression as a STRING, and uses it
as a regular expression for matching purposes. The SLASH_AND_REGEXP is a slash ("/")
followed by a STRING, interpreted as a regular expression. If 'INTEGER , INTEGER
IDENTIFIER arguments' is encountered, command IDENTIFIER will be repeated on each file in
the interval between the two INTEGERs, and substituting the given file name to any '{}'
found in the commands arguments (which must be quoted in order to be treated as strings).
See regex(1) for regular expression syntax.
The way some one-line statements are evaluated:
: enter command line mode
:{number} jump to {number}^th image in the list
:^ jump to first image in the list
:$ jump to last image in the list
:*{factor} scale the image by {factor}
:{scale}% scale the image to the desired {scale}
:+{scale}% scale the image up to the desired percentage {scale} (relatively to the original)
:-{scale}% scale the image down to the desired percentage {scale} (relatively to the original)
/{regexp} entering the pattern {regexp} (with /) makes fim jump to the next image whose filename matches {regexp}
/*.png$ entering this pattern (with /) makes fim jump to the next image whose filename ends with 'png'
/png a shortcut for /.*png.*
2,4 stdout '{}' print three filenames to standard output.
!{syscmd} executes the {syscmd} quoted string as an argument to the "system" fim command.
COMMANDS REFERENCE
alias
alias [{identifier} [{commands} [{description}]]]
Without arguments, lists the current aliases.
With one, shows an identifier's assigned command.
With two, assigns to an identifier a user defined command or sequence of commands.
With three, also assigns a help string.
align
align ['bottom'|'top'|'left'|right']: if image larger than drawing area, align one side of
the image to the border.
align 'center': align equally far from all sides.
align 'info': print internal alignment information.
autocmd
autocmd {event} {pattern} {commands}: manipulate autocommands (inspired from Vim
autocmd's).
Without arguments, list autocommands.
With arguments, specifies for which type of event and which current file open, which
commands to execute.
See the default built-in configuration files for examples.
autocmd_del
autocmd_del: specify autocommands to delete.
Usage: autocmd_del {event} {pattern} {commands}.
basename
basename {filename}: returns the basename of {filename} in the '_last_cmd_output'
variable.
bind
bind [{keysym} [{commands}]]: bind a keyboard symbol/shortcut {keysym} to {commands}.
If {keysym} is at least two characters long and begins with 0 (zero), the integer number
after the 0 will be treated as a raw keycode to bind the specified {keysym} to.
Use the '_verbose_keys' variable to discover (display device dependent) raw keys.
Key binding is dynamical, so you can rebind keys even during program's execution.
You can get a list of valid symbols (keysyms) by invoking dump_key_codes or in the man
page.
cd
cd {path}: change the current directory to {path}.
If {path} is a file, use its base directory name.
cd '-' will change to the previous current directory (before the last ':cd {path}'
command).
clear
clear: clear the virtual console.
commands
commands: display the existing commands.
color
color [desaturate]: desaturate the displayed image colors.
color [negate]: negate the displayed image colors.
color [colorblind|c|deuteranopia|d]: simulate a form of the deuteranopia color vision
deficiency (cvd).
color [protanopia|p]: simulate a form of the protanopia cvd.
color [tritanopia|t]: simulate a form of the tritanopia cvd.
color [daltonize|D]: if following a cvd specification, will attempt correcting it.
color [identity]: populate the image with 'RGB identity' pixels.
To get back the original you will have to reload the image.
crop
crop: crop image to a centered rectangle, half the width and half the height.
crop {p}: crop image to the middle {p} horizontal percent and {p} vertical percent of the
image.
crop {w} {h}: crop image to the middle {w} horizontal percent and {h} vertical percent of
the image.
crop {x1} {y1} {x2} {y2}: crop image to the area between the upper left ({x1},{y1}) and
lower right ({x2},{y2}) corner.
Units are intended as percentage (0 to 100).
Note: still experimental functionality.
desc
desc 'load' {filename} [{sepchar}]: load description file {filename}, using the optional
{sepchar} character as separator.
desc 'reload': load once again description files specified at the command line with
--load-image-descriptions-file, with respective separators.
desc ['-all'] ['-append'] ['-nooverw'] 'save' {filename} [{sepchar}]: save current list
descriptions to file {filename}, using the optional {sepchar} character as separator, and
if '-all' is present will save the variables, and if '-append' is present, will only
append, and if '-nooverw' is present, will not overwrite existing files.
See documentation of --load-image-descriptions-file for the format of {filename}.
display
display ['reinit' {string}]|'resize' {w} {h}]: display the current file contents.
If 'reinit' switch is supplied, the '{string}' specifier will be used to reinitialize
(e.g.: change resolution, window system options) the display device.
See documentation for the --output-device command line switch for allowed values of
{string}.
If 'resize' and no argument, will ask the window manager to size the window like the
image.
If 'resize' and two arguments, these will be used as width and height of window, to set.
dump_key_codes
dump_key_codes: dump the active key codes (unescaped, for inspection purposes).
echo
echo {args}: print the {args} on console.
else
if(expression){action;}['else'{action;}]: see else.
eval
eval {args}: evaluate {args} as commands, executing them.
exec
exec {filename(s)}: execute script {filename(s)}.
font
font 'scan' [{dirname}]: scan {dirname} or /usr/share/consolefonts looking for fonts in
the internal fonts list.
font 'load' {filename}: load font {filename}.
font 'next'/'prev': load next/previous font in the internal fonts list.
font 'info': print current font filename.
getenv
getenv {identifier}: create a variable with the same value as the '{identifier}'
environment variable, but with an identifier prefixed by 'ENV_'. So e.g. getenv 'DISPLAY'
creates 'ENV_DISPLAY'. Nothing is being printed; no variable is created if {identifier} is
empty.
goto
goto {['+'|'-']{number}['%']['f'|'p'|'F'|'P']} | {/{regexp}/} | {?{filename}} | {'+//'} |
{'+/'|'-/'}[C] | {{'+'|'-'}{identifier}['+']}: jump to an image.
If {number} is given, and not surrounded by any specifier, will go to image at index
{number}.
If followed by '%', the effective index will be computed as a percentage to the current
available images.
If prepended by '-' or '+', the jump will be relative to the current index.
The 'f' specifier asks for the jump to occur within the files (same for 'F', but
accelerates if keep pressing).
The 'p' specifier asks for the jump to occur in terms of pages, within the current file
(same for 'P', but accelerates if keep pressing).
If /{regexp}/ is given, will jump to the first image matching the given /{regexp}/ regular
expression pattern.
If the argument starts with ?, jump to the filename following ?.
If given '+//', will jump to the first different image matching the last given regular
expression pattern.
With '+/'C or '-/'C will jump to next or previous file according to C: if 's' if same
directory, if 'd' if down the directory hierarchy, if 'u' if down the directory hierarchy,
if 'b' if same basename, if upper case match is negative, if missing defaults to 'S' (jump
to file in different dir).
If {identifier|identifier2...}] is encountered after a '+' or '-' sign, jump to next or
previous image having a different value for any corresponding i:{identifier} (a trailing
'+' will require a non empty value).
Match will occur on both file name and description, possibly loaded via desc or
--load-image-descriptions-file; see also '_lastgotodirection' and '_re_search_opts'.
You can specify multiple arguments to goto: those after the first triggering a jump will
be ignored.
Executes autocommands for events PreGoto and PostGoto. Keeping pressed shall accelerate
images browsing.
help
help [{identifier}]: provide online help, assuming {identifier} is a variable, alias, or
command identifier.
If {identifier} begins with '/', the search will be on the help contents and a list of
matching items will be given instead.
A list of commands can be obtained simply invoking 'commands'; a list of aliases with
'alias'; a list of bindings with 'bind'.
if
if(expression){action;}['else'{action;}]: see 'else'.
info
info: display information about the current file.
limit
limit {'-list'|'-listall'} 'variable'|['-further'|'-merge'|'-subtract'] [{expression}
|{variable} {value}]: A browsable file list filtering function (like limiting in the
'mutt' program). Uses information loaded via --load-image-descriptions-file.
If invoked with '-list'/'-listall' only, will list the current description variable ids.
If invoked with '-list'/'-listall' 'id', will list set values for the variable 'id'.
If '-further' is present, will start with the current list; if not, with the full list.
If '-merge' is present, new matches will be merged in the existing list and sorted.
If '-subtract' is present, sort and filter out matches.
If {variable} and {values} are provided, limit to files having property {variable} set to
{value}.
If {expression} is one exclamation point ('!'), will limit to the currently marked files
only.
If {expression} is '~!' will limit to files with unique basename.
if '~=', to files with duplicate basename.
if '~^', to the first of the files with duplicate basename.
if '~$', to the last of the files with duplicate basename.
On '~i' [MINIDX][-][MAXIDX], (each a number possibly followed by a multiplier 'K') will
limit on filenames in position MINIDX to MAXIDX.
On '~z' will limit to files having the current file's size.
on '~z' [MINSIZE][-][MAXSIZE], (each a number possibly followed by a multiplier among
'k','K','m','M') will limit on filesize within these limits.
on '~d' will limit to files having the current file's date +- one day.
on '~d' [MINTIME][-][MAXTIME], (each the count of seconds since the Epoch (First of Jan.
of 1970) or a date as DD/MM/YYYY) will limit on file time (struct stat's 'st_mtime', in
seconds) within this interval.
For other values of {expression}, limit to files whose description string matches
{expression}.
Invoked with no arguments, the original browsable files list is restored.
list
list: display the files list.
list 'random_shuffle': randomly shuffle the file list.
list 'reverse': reverse the file list.
list 'clear': clear the file list.
list 'sort': sort the file list.
list 'sort_basename': sort the file list according to base name.
list 'sort_comment': sort the file list according to the value of the _comment variable.
list 'sort_var' {var}: sort the file list according to the value of the i:{var} variable.
list 'vars|variables': list variables in all i:* read from description file.
list 'sort_fsize': sort the file list according to file size.
list 'sort_mtime': sort the file list according to modification date.
list 'pop': remove the current file from the files list, and step back.
list 'remove' [{filename(s)}]: remove the current file, or the {filename(s)}, if
specified.
list 'push' {filename(s)}: push {filename(s)} to the back of the files list.
list 'filesnum': display the number of files in the files list.
list 'mark' [{args}]: mark image file names for stdout printing at exit, with {args} mark
the ones matching according to the rules of the 'limit' command, otherwise the current
file.
list 'unmark' [{args}]: unmark marked image file names, with {args} unmark the ones
matching according to the rules of the 'limit' command, otherwise the current file.
list 'marked': show which files have been marked so far.
list 'dumpmarked': dump to stdout the marked files (you will want usually to 'unmarkall'
afterwards).
list 'markall': mark all the current list files.
list 'unmarkall': unmark all the marked files.
list 'pushdir' {dirname}: will push all the files in {dirname}, when matching the regular
expression in variable _pushdir_re or, if empty, from constant regular expression
'.(JPG|PNG|GIF|BMP|TIFF|TIF|JPEG|JFIF|PPM|PGM|PBM|PCX|WEBP)$'.
list 'pushdirr' {dirname}: like pushdir, but will also push encountered directory entries
recursively.
list 'swap': will move the current image filename to the first in the list (you'll have to
invoke reload to see the effect).
Of the above commands, several will be temporarily non available for the duration of a
background load (enabled by --background-recursive), which will last until
_loading_in_background is 0.
load
load: load the image, if not yet loaded (see also 'reload').
Executes autocommands for events PreLoad and PostLoad.
pan
pan {vsteps}% {hsteps}%: pan the image to {vsteps} percentage steps from the top and
{hsteps} percentage steps from left.
pan {vsteps} {hsteps}: pan the image to {vsteps} pixels from the top and {hsteps} pixels
from left.
pan {'down'|'up'|'left'|'right'|'ne'|'nw'|'se'|'sw'}[+-] [{steps}['%']]: pan the image
{steps} pixels in the desired direction.
If the '%' specifier is present, {steps} will be treated as a percentage of current screen
dimensions.
If {steps} is not specified, the '_steps' variable will be used.
If present, the '_hsteps' variable will be considered for horizontal panning.
A '+' or '-' sign at the end of the first argument will make jump to next or prev if
border is reached.
If present, the '_vsteps' variable will be considered for vertical panning.
The variables may be terminated by the '%' specifier.
Executes autocommands for events PrePan and PostPan.
popen
popen {syscmd}: pipe a command, invoking popen(): spawns a shell, invoking '{syscmd}' and
executing as fim commands the output of '{syscmd}'.
pread
pread {args}: execute {args} as a shell command and read the output as an image file
(using 'popen').
prefetch
prefetch: prefetch (read into the cache) the two nearby image files (next and previous),
for a faster subsequent opening.
Executes autocommands for events PrePrefetch and PostPrefetch.
See also the '_want_prefetch' variable.
pwd
pwd: print the current directory name, and updates the '_pwd' variable.
quit
quit [{number}]: terminate the program.
If {number} is specified, use it as the program return status.
Note that autocommand 'PostInteractiveCommand' does not trigger after this command.
recording
recording 'start': start recording the executed commands.
recording 'stop': stop recording the executed commands.
recording 'dump': dump in the console the record buffer.
recording 'execute': execute the record buffer.
recording 'repeat_last': repeat the last performed action.
redisplay
redisplay: re-display the current file contents.
reload
reload [{arg}]: load the image into memory.
If {arg} is present, will force reloading, bypassing the cache (see also 'load').
Executes autocommands for events PreReload and PostReload.
rotate
rotate {number}: rotate the image the specified amount of degrees. If unspecified, by one.
If you are interested in orthogonal rotations, see '_orientation' and related aliases.
Executes autocommands for events PreScale and PostScale.
scale
scale {['+'|'-']{value}['%']|'*'{value}|'w'|'h'|'a'|'b'|'+[+-*/]'|['<'|'>']|'shadow'}:
scale the image according to a scale {value} (e.g.: 0.5,40%,'w','h','a','b').
If given '*' and a value, will multiply the current scale by that value.
If given 'w', will scale according to the screen width.
If given 'h', scale to the screen height.
If given 'a', to the minimum of 'w' and 'h'.
If given 'b', like 'a', provided that the image width exceeds 'w' or 'h'.
If {value} is a number, will scale relatively to the original image width.
If the number is followed by '%', the relative scale will be treated on a percent scale.
If given '++'('+-'), will increment (decrement) the '_magnify_factor', '_reduce_factor'
variables by '_scale_factor_delta'.
If given '+*'('+/'), will multiply (divide) the '_magnify_factor', '_reduce_factor'
variables by '_scale_factor_multiplier'.
If given '<' or '>', will shrink or magnify image using nearest mipmap (cached pre-scaled
version). If given 'shadow' as a parameter, search a same-named file in one of the
directories specified to --load-shadow-dir.
Executes autocommands for events PreScale and PostScale.
scroll
scroll: scroll down the image, going next when hitting the bottom.
scroll 'forward': scroll the image as we were reading left to right (see
'_scroll_skip_page_fraction' variable).
Executes autocommands for events PrePan and PostPan.
set
set: returns a list of variables which are set.
set {identifier}: returns the value of variable {identifier}.
set {identifier} {commands}: sets variable {identifier} to value {commands}.
set_commandline_mode
set_commandline_mode: set console mode.
set_interactive_mode
set_interactive_mode: set interactive mode.
sleep
sleep [{number}=1]: sleep for the specified (default 1) number of seconds.
status
status: set the status line to the collation of the given arguments.
stderr
stderr {args}: writes to stderr its arguments {args}.
stdout
stdout {args}: writes to stdout its arguments {args}.
system
system {syscmd}: get the output of executing the {syscmd} system command. Uses the popen()
system call. Usually popen invokes "/bin/sh -c {syscmd}". This might not handle a
multi-word command; in that case you will have to put it into a script. See 'man popen'
for more.
variables
variables: display the existing variables.
unalias
unalias {identifier} | '-a': delete the alias {identifier} or all aliases (use '-a', not
-a).
unbind
unbind {keysym}: unbind the action associated to a specified {keysym}
If {keysym} is at least two characters long and begins with 0 (zero), the integer number
after the 0 will be treated as a raw keycode to bind the specified {keysym} to.
Use the '_verbose_keys' variable to discover (display device dependent) raw keys.
while
while(expression){action;}: A conditional cycle construct.
May be interrupted by hitting the 'Esc' or the ':' key.
window
window {args}: this command is disabled.
KEYSYMS REFERENCE
" " "!" """ "#" "$" "%" "&" "'" "(" ")" "*" "+" "," "-" "." "/" "0" "1"
"2" "3" "4" "5" "6" "7" "8" "9" ":" ";" "<" "=" ">" "?" "@" "A" "Any" "B"
"BackSpace" "Backspace" "C" "C-a" "C-b" "C-c" "C-d" "C-e" "C-f" "C-g" "C-h"
"C-i" "C-j" "C-k" "C-l" "C-m" "C-n" "C-o" "C-p" "C-q" "C-r" "C-s" "C-t" "C-u"
"C-v" "C-w" "C-x" "C-y" "C-z" "D" "Del" "Down" "E" "End" "Enter" "Esc" "F"
"F1" "F10" "F11" "F12" "F2" "F3" "F4" "F5" "F6" "F7" "F8" "F9" "G" "H"
"Home" "I" "Ins" "J" "K" "L" "Left" "M" "N" "O" "P" "PageDown" "PageUp" "Q"
"R" "Right" "S" "T" "Tab" "U" "Up" "V" "W" "X" "Y" "Z" "[" "\" "]" "^" "_"
"`" "a" "b" "c" "d" "e" "f" "g" "h" "i" "j" "k" "l" "m" "n" "o" "p" "q"
"r" "s" "t" "u" "v" "w" "x" "y" "z" "{" "|" "}" "~"
AUTOCOMMANDS REFERENCE
Available autocommands are: PreScale, PostScale, PrePan, PostPan, PreRedisplay,
PostRedisplay, PreDisplay, PostDisplay, PrePrefetch, PostPrefetch, PreReload, PostReload,
PreLoad, PostLoad, PreGoto, PostGoto, PreConfigLoading, PostConfigLoading,
PreHardcodedConfigLoading, PostHardcodedConfigLoading, PreUserConfigLoading,
PostUserConfigLoading, PreGlobalConfigLoading, PostGlobalConfigLoading,
PreInteractiveCommand, PostInteractiveCommand, PreExecutionCycle, PostExecutionCycle,
PreExecutionCycleArgs, PreWindow, PostWindow, and they are triggered on actions as
suggested by their name.
Those associated to actual commands are mentioned in the associated commands reference.
VARIABLES REFERENCE
If undeclared, a variable will evaluate to 0.
When assigning a variable to a string, use single or double quoting, otherwise it will be
treated as a number.
The namespaces in which variables may exist are: current image, global. A namespace is
specified by a prefix, which can be: 'i:', be prepended to the variable name. The global
namespace is equivalent to the empty one:''. The special variable i:* expands to the
collation of all the name-value pairs for the current image.
In the following, the [internal] variables are the ones referenced in the source code (not
including the hardcoded configuration, which may be inspected and/or invalidated by the
user at runtime).
_TERM [out,g:] the environment TERM variable.
__exif_flipped [out,i:] flipping information, read from the EXIF tags of a given image.
__exif_mirrored [out,i:] mirroring information, read from the EXIF tags of a given image.
__exif_orientation [out,i:] orientation information in the same format of _orientation,
read from the orientation EXIF tags (i:EXIF_Orientation).
_all_file_loaders [out,g:] space-separated list of hardcoded file loaders usable with
_file_loader.
_archive_files [in,g:] Regular expression matching filenames to be treated as (multipage)
archives. If empty, ".(RAR|ZIP|TAR|TAR.GZ|TGZ|TAR.BZ2|TBZ|TBZ2|CBR|CBZ|LHA|7Z|XAR|ISO)$"
will be used. Within each archive, only filenames matching the regular expression in the
_pushdir_re variable will be considered for opening.
_autocmd_trace_stack [in,g:] dump to stdout autocommands (autocmd) stack trace during
their execution (for debugging purposes).
_autodesaturate [in,g:] if 1, will desaturate images by default.
_autoflip [in,g:] if 1, will flip images by default.
_automirror [in,g:] if 1, will mirror images by default.
_autonegate [in,g:] if 1, will negate images by default.
_autotop [in,g:] if 1, will align to the top freshly loaded images.
_buffered_in_tmpfile [out,i:] if an image has been temporarily converted and decoded from
a temporary file, its name is here.
_cache_control [in,g:] string for cache control. if it starts with 'm' mipmaps will be
cached; if it starts with 'M' then not. otherwise defaults will apply.
_cache_status [out,g:] string with current information on cache status.
_cached_images [out,g:] the number of images currently cached.
_caption_over_image [in,g:] if set not to 0, will display a custom comment string
specified according to the value of_caption_over_image_fmt; if larger than 1, with black
background; if 3, image will be drawn possibly below. It will take at most half of the
screen.
_caption_over_image_fmt [in,g:] custom info format string, displayed in a caption over the
image; if unset: i:_comment; otherwise a custom format string specified just as
_info_fmt_str.
_command_expansion [in,g:] if 1, will enable autocompletion (on execution) of alias and
command strings.
_comment [i:,out] the image comment, extracted from the image file (if any).
_console_buffer_free [out,g:] amount of unused memory in the output console buffer.
_console_buffer_total [out,g:] amount of memory allocated for the output console buffer.
_console_buffer_used [out,g:] amount of used memory in the output console buffer.
_console_key [in,g:] the key binding (an integer variable) for spawning the command line;
will have precedence over any other binding.
_console_lines [out,g:] the number of buffered output console text lines.
_console_offset [in,out,g:] position of the text beginning in the output console,
expressed in lines.
_debug_commands [in,g:] debugging option string for printing out . if containing 'a',
print out autocmd info; if containing 'c', print out each command; if containing 'k',
print out each pressed key; if containing 'j', print interpreter internal steps; if
containing 'B', clear screen and print background loading files; if containing 'C', print
cache activity.
_device_string [out,g:] the current display device string.
_display_as_binary [in,g:] will force loading of the specified files as pixelmaps (no
image decoding will be performed); if 1, using one bit per pixel; if 24, using 24 bits
per pixel; otherwise will load and decode the files as usual.
_display_as_rendered_text [in,g:] will force loading of the specified files as text files
(no image decoding will be performed); if 1; otherwise will load and decode the files as
usual.
_display_busy [in,g:] if 1, will display a message on the status bar when processing.
_display_console [in,g:] if 1, will display the output console.
_display_status [in,g:] if 1, will display the status bar.
_display_status_bar [in,g:] if 1, will display the status bar.
_display_status_fmt [in,g:] custom info format string, displayed in the lower left corner
of the status bar; if unset: full pathname; otherwise a custom format string specified
just as _info_fmt_str.
_do_sanity_check [in,experimental,g:] if 1, will execute a sanity check on startup.
_downscale_huge_at_load [in,g:] if 1, will downscale automatically huge images at load
time.
_exiftool_comment [out,g:] comment extracted via the exiftool interface; see
_use_exiftool.
_fbfont [out,g:] The current console font file string. If the internal hardcoded font has
been used, then its value is "fim://".
_fbfont_as_screen_fraction [in,g:] The rendered text will be scaled at least to this
(integer) fraction of the screen. Disable font autoscaling with -1. (Only enabled if
configured with --with-font-magnifying-factor=FACTOR, with FACTOR<1).
_fbfont_magnify_factor [in,g:] The rendered text will use a font magnified by this
(integer) factor. Maximal value is "16". (Only enabled if configured with
--with-font-magnifying-factor=FACTOR, with FACTOR<1).
_fbfont_verbosity [in,g:] if > 0, verbose font loading
_file_load_time [out,i:] time taken to load the file and decode the image, in seconds.
_file_loader [in,i:,g:] if not empty, this string will force a file loader (among the ones
listed in the -V switch output); [out] i:_file_loader stores the loader of the current
image.
_fileindex [out,g:] the current image numeric index.
_filelistlen [out,g:] current image list length (number of visible images).
_filename [out,i:] the current file name string.
_fim_bpp [out,g:] the bits per pixel count.
_fim_default_config_file_contents [out,g:] the contents of the default (hardcoded)
configuration file (executed after the minimal hardcoded config).
_fim_default_grammar_file_contents [out,g:] the contents of the default (hardcoded)
grammar file.
_fim_scriptout_file [in,g:] the name of the file to write to when recording sessions.
_fim_version [out,g:] fim version number; may be used for keeping compatibility of fim
scripts across evolving versions.
_hsteps [in,g:] the default steps, in pixels, when panning images horizontally (overrides
steps).
_ignorecase [in,g:] if 1, will allow for case insensitive regexp-based match in
autocommands (autocmd).
_info_fmt_str [in,g:] custom info format string, displayed in the lower right corner of
the status bar; may contain ordinary text and special 'expando' sequences. These are: %p
for current scale, in percentage; %w for width; %h for height; %i for image index in list;
%k for the value of i:_comment (comment description) variable in square brackets; %l for
current image list length; %L for flip/mirror/orientation information; %P for page
information; %F for file size; %M for screen image memory size; %m for memory used by
mipmap; %C for memory used by cache; %T for total memory used (approximation); %R for
total max memory used (as detected by getrusage()); %n for the current file path name; %N
for the current file path name basename; ; %c for centering information; %v for the fim
program/version identifier string; %% for an ordinary %. A sequence like %?VAR?EXP?
expands to EXP if i:VAR is set; EXP will be copied verbatim except for contained sequences
of the form %:VAR:, which will be expanded to the value of variable i:VAR; this is meant
to be used like in e.g. '%?EXIF_DateTimeOriginal?[%:EXIF_DateTimeOriginal:]?', where the
EXIF-set variable EXIF_DateTimeOriginal (make sure you have libexif for this) will be used
only if present.
_inhibit_display [internal,g:] if 1, will inhibit display.
_last_cmd_output [out,experimental,g:] the last command output.
_last_file_loader [out,g:] after each image load, _last_file_loader will be set to the
last file loader used.
_last_system_output [out,experimental,g:] the standard output of the last call to the
system command.
_lastfileindex [out,g:] the last visited image numeric index. Useful for jumping back and
forth easily between two images with 'goto _lastfileindex'.
_lastgotodirection [out,g:] the last file goto direction (either string '+1' or string
'-1').
_load_default_etc_fimrc [in,g:] if 1 at startup, will load the system wide initialization
file.
_load_fim_history [in,g:] if 1 on startup, will load the ~/.fim_history file on startup.
_load_hidden_dirs [in,g:] if not 1, when pushing directories/files, those whose name
begins with a dot (.) will be skipped.
_loading_in_background [out,g:] 1 if program has been invoked with --background-recursive
and still loading in background.
_loop_only_once [internal,g:] if 1 and doing a --slideshow, do it once.
_lwidth [in,g:] if>0, will force the output console text width.
_magnify_factor [in,g:] the image scale multiplier used when magnifying images size.
_max_cached_images [in,g:] the maximum number of images after which evictions will be
forced. Setting this to 0 (no limits) is ok provided _max_cached_memory is set
meaningfully.
_max_cached_memory [in,g:] the maximum amount of memory (in KiB) at which images will be
continued being added to the cache. Setting this to 0 (no limit) will lead to a crash
(there is no protection currently).
_max_iterated_commands [g:] the iteration limit for N in "N[commandname]" iterated command
invocations.
_min_cached_images [in,g:] the minimum number of images to keep from eviction; if less
than four can lead to inefficiencies: e.g. when jumping between two images, each time an
erase and a prefetch of neighboring images would trigger. default value is 4.
_no_default_configuration [in,g:] if 0, a default, hardcoded configuration will be
executed at startup, after the minimal hardcoded one.
_no_external_loader_programs [in,g:] if 1, no external loading programs will be tried for
piping in an unsupported type image file.
_no_rc_file [in,g:] if 1, the ~/.fimrc file will not be loaded at startup.
_open_offset [in,optional,g:,i:] offset (specified in bytes) used when opening a file;
[out] i:_open_offset will be assigned to images opened at a nonzero offset.
_open_offset_retry [in,optional,g:] number of adjacent bytes to probe in opening the file.
_orientation [internal,i:] Orthogonal clockwise rotation (orientation) is controlled by:
'i:_orientation', 'g:_orientation' and applied on a per-image basis. In particular, the
values of the three variables are summed up and the sum is interpreted as the image
orientation. If the sum is 0, no rotation will apply; if it is 1, a single ( 90')
rotation will apply; if it is 2, a double (180') rotation will apply; if it is 3, a triple
(270') rotation will apply. If the sum is not one of 0,1,2,3, the value of the sum modulo
4 is considered. Therefore, ":i:_orientation=1" and ":i:_orientation=5" are equivalent:
they rotate the image one time by 90'.
_pread_cmd [in,g:] a user-specified shell command emitting an image on stdout, in a format
readable by the convert utility. If the current filename matches
"^[/A-Za-z0-9_.][/A-Za-z0-9_.-]*$", it will be substituted to any occurrence of '{}'.
_preferred_rendering_dpi [in,optional,g:] if >0, pdf, ps, djvu rendering will use this
value for a default document dpi (instead of a default value).
_preferred_rendering_width [in,optional,g:] if >0, bit based rendering will use this value
for a default document width (instead of a default value).
_push_checks [in,experimental,g:] if 1 (default), will check with stat() existence of
input files before push'ing them (set this to 0 to speed up loading very long file lists;
in these cases a trailing slash (/) will have to be used to tell fim a pathname is a
directory). This only works after initialization (thus, after command line files have been
push'ed); use --no-stat-push if you wish to set this to 0 at command line files
specification.
_push_pushes_dirs [in,g:] if 1, the push command will also accept and push directories
(using pushdir). if 2, will also push hidden files/directories, that is, ones whose names
begin with a dot (.).
_pushdir_re [in] regular expression to match against when pushing files from a directory
or an archive. By default this is
".(JPG|PNG|GIF|BMP|TIFF|TIF|JPEG|JFIF|PPM|PGM|PBM|PCX|WEBP)$".
_pwd [out,g:] the current working directory; will be updated at startup and whenever the
working directory changes.
_re_search_opts [in,g:] affects regexp-based searches; if an empty string, defaults will
apply; if contains 'i' ('I'), case insensitive (sensitive) searches will occur; if
contains 'b', will match on basename, if contains 'f' on full pathname.
_reduce_factor [in,g:] the image scale multiplier used when reducing images size.
_retry_loader_probe [in,g:] if 1 and user specified a file loader and this fails, will
probe for a different loader.
_rows [in,g:] if >0, will set the number of displayed text lines in the console.
_save_fim_history [in,g:] if 1 on exit, will save the ~/.fim_history file on exit.
_scale_factor_delta [in,g:] value used for incrementing/decrementing the scaling factors.
_scale_factor_multiplier [in,g:] value used for scaling up/down the scaling factors.
_scale_style [in,g:] if non empty, this string will be fed to the scale command; see its
documentation for possible values.
_screen_height [out] the screen height.
_screen_width [out,g:] the screen width.
_scroll_skip_page_fraction [int,g:] if >1, fraction of page which will be skipped in when
scrolling (e.g. 'scrollforward'); if 1, auto chosen; if <1, disabled.
_seek_magic [optional,g:] will seek a 'magic' signature in the file after opening it, and
will try decoding it starting within the range of that signature (use like this: fim -C
'_seek_magic=MAGIC_STRING;push filename').
_status_line [in,g:] if 1, will display the status bar.
_steps [in,g:] the default steps, in pixels, when panning images.
_sys_rc_file [in,g:] string with the global configuration file name.
_use_exiftool [in,g:] if >0 and supported, exiftool will be used to get additional
information. if 1, this will be appened to _comment; if 2, will go to _exiftool_comment.
_use_mipmaps [in,g:] if >0, will use mipmaps to speed up downscaling of images (this has a
memory overhead equivalent to one image copy); mipmaps will not be cached. If 2, will use
every fourth source pixel instead of averaging (good for photos, not for graphs).
_verbose_errors [in,g:] if 1, will display on stdout internal errors, while parsing
commands.
_verbose_keys [in,g:] if 1, after each interactive mode key hit, the console will display
the hit key raw keycode.
_verbosity [in,experimental,g:] program verbosity.
_vsteps [in,g:] the default steps, in pixels, when panning images vertically (overrides
steps).
_want_autocenter [in,g:] if 1, the image will be displayed centered.
_want_exif_orientation [in,g:] if 1, will reorient images using information from EXIF
metadata (and stored in in __exif_orientation, __exif_mirrored, __exif_flipped ).
_want_prefetch [in,g:] if 1, will prefetch further files just after display of the first
file; if 2 (and configured with --enable-cxx11) will load in the background.
_want_sleep_seconds [in,g:] number of seconds of sleep during slideshow mode.
_want_wm_caption_status [in,g:] this works only if supported by the display device
(currently only SDL). if set to a number that is not 0, will show the status (or command)
line in the window manager caption; if set to a non-empty string, will interpret it just
as a file info format string (see _info_fmt_str); if empty, will show the program version.
_want_wm_mouse_ctrl [in,g:] if at least 9 chars long, enable mouse click/movement
behaviour when in SDL mode; the 9 chars will correspond to a 3x3 screen clickable grid and
the equivalent command keys; clicking middle or right button will toggle on-screen usage
info.
angle [in,out,i:] a floating point number specifying the rotation angle, in degrees.
ascale [in,out,i:] the asymmetric scaling of the current image.
desaturated [out,i:] 1, if the image is desaturated.
flipped [out,i:] 1, if the image is flipped.
fresh [in,out,i:,experimental] 1 if the image was loaded, before all autocommands
(autocmd) execution.
height [out,i:] the current image original height.
mirrored [out,i:] 1, if the image is mirrored.
negated [out,i:] 1, if the image is negated.
page [out,experimental,g:] the current page.
pages [out,experimental,i:] the current number of pages of an image.
random [out] a pseudorandom number.
scale [in,i:] the scale of the current image.
sheight [out,i:] the current image scaled height.
swidth [out,i:] the current image scaled width.
width [out,i:] the current image original width.
DEFAULT ALIASES REFERENCE
Hardcoded aliases are:
alias "A" "'_autotop=1-_autotop;'"
alias "magnify" "scale '+'" # magnify the displayed image by the _magnify_factor variable
or {args}
alias "next" "goto '+1'" # go to the next page or picture file
alias "next_file" "goto '+1f'" # go to the next file in the list
alias "next_page" "goto '+1p'" # go to the next page in the file
alias "prev" "goto '-1'" # go to the previous page or picture file
alias "prev_file" "goto '-1f'" # go to the previous file in the list
alias "prev_page" "goto '-1p'" # go to the previous page in the file
alias "reduce" "scale '-'" # reduce the displayed image by _reduce_factor or {args}
alias "scale_factor_decrease" "scale '+-'" # subtract _scale_factor_delta to the scale
factors _reduce_factor and _magnify_factor
alias "scale_factor_grow" "scale '+*'" # multiply the scale factors _reduce_factor and
_magnify_factor by _scale_factor_multiplier
alias "scale_factor_increase" "scale '++'" # add _scale_factor_delta to the scale factors
_reduce_factor and _magnify_factor
alias "scale_factor_shrink" "scale '+/'" # divide the scale factors _reduce_factor and
_magnify_factor by _scale_factor_multiplier
They can be redefined with alias or deleted with the unalias command.
Further default aliases are usually loaded at startup -- see the CONFIGURATION FILE
EXAMPLE section below.
COMMAND LINE USAGE EXAMPLES
# jump to the third image:
3;
# jump to first image:
^;
# jump to last image:
$;
# magnify the image two times:
*2;
# scale the image to the 30% of the original:
30%;
# scale the image up by 30%:
+30%;
# scale the image down by 30%:
-30%;
# jump to the next image whose filename matches the ".*jpg" regular expression:
/.*jpg;
# executes the "date" system command
!"date";
CONFIGURATION FILE EXAMPLE
Part of the default configuration comes from the _fim_default_config_file_contents
variable, shown here.
One can skip its loading by using the _no_default_configuration variable.
# $LastChangedDate: 2023-03-09 00:38:06 +0100 (Thu, 09 Mar 2023) $
# Contents of the default 'fimrc' file, hardcoded in the fim executable.
# Read the documentation (man fimrc) to discover how to change this default hardcoded file and how to make your own.
# Note that usually a ~/.fimrc file is read after these options take effect, so you could reset all of this with ease.
# Lines beginning with a pound (#) are ignored by fim (they are treated as comments).
#
# Internal variables.
# Some of these variables influence fim's behaviour (input variables), some are set by fim (output variables).
# It is wise the input variables are set at the beginning of the file, so the bottom may issue commands correctly affected by them.
if(_cache_control==''){_cache_control='m';}
if(_debug_commands==''){_debug_commands='';}
if(_command_expansion==''){_command_expansion=1;}
if(_display_status==''){_display_status=0;}
if(_max_cached_images==''){_max_cached_images=5;}
if(_min_cached_images==''){_min_cached_images=4;}
if(_max_cached_memory==''){_max_cached_memory=81920;}
if(_max_iterated_commands==''){_max_iterated_commands=100;}
if(_want_prefetch==''){_want_prefetch=1;}
if(_no_external_loader_programs==''){_no_external_loader_programs=0;}
if(_scale_style==''){_scale_style='b';}
if(_save_fim_history==''){_save_fim_history=1;}
if(_load_fim_history==''){_load_fim_history=1;}
if(_verbose_keys==''){_verbose_keys=0;}
if(_display_busy==''){_display_busy=1;}
if(_ignorecase==''){_ignorecase=1;}
if(_re_search_opts==''){_re_search_opts='bi';}
if(_console_offset==''){_console_offset=0;}
if(_console_key==''){_console_key=58;}
if(_display_as_binary==''){_display_as_binary=0;}
if(_push_checks==''){_push_checks=1;}
#if(_want_wm_caption_status==''){_want_wm_caption_status=0;}
if(_want_exif_orientation==''){_want_exif_orientation=1;}
if(ascale==''){ascale="1.0";}
if(_use_mipmaps==''){_use_mipmaps=1;}
if(_downscale_huge_at_load==''){_downscale_huge_at_load=1;}
if(_scroll_skip_page_fraction==''){_scroll_skip_page_fraction=0;}
if(_want_wm_mouse_ctrl==''){_want_wm_mouse_ctrl="'pP+a-=nN";}
#
# External variables (not used internally).
if(allow_round_scroll==''){allow_round_scroll=0;}
if(console_scroll_n==''){console_scroll_n=3;}
#
alias "toggleautoflip" "_autoflip=1-_autoflip" "";
alias "toggleautonegate" "_autonegate=1-_autonegate" "";
alias "toggleflip" "i:flipped=1-i:flipped" "toggles flipped property on the current image";
alias "flip" "toggleflip;redisplay" "flip the current image along the horizontal axis";
alias "fliponce" "flip;toggleflip" "flip, but just for one display";
alias "toggleautomirror" "_automirror=1-_automirror" "";
alias "togglemirror" "i:mirrored=1-i:mirrored" "toggles mirrored property on the current image";
alias "mirror" "togglemirror;redisplay" "mirror the image along the vertical axis" "";
alias "mirroronce" "mirror;togglemirror" "mirror, but just for one display";
alias 'toggleLimitMarked' '__pre_limit_fileindex=_fileindex;_limit_mode=1-_limit_mode; if(_limit_mode==1){limit "!";} else { limit; } if(_filelistlen<1){_limit_mode=0;limit;goto __pre_limit_fileindex;} i:fresh=1;redisplay; ' "toggle between limiting file list to the marked files and the full list";
alias "unlimit" "limit" "calling limit with no arguments restores the original list";
# Warning : binding to C-s, C-z and C-c won't make effect, as these
# codes are get caught by the console driver and will have no effect in fim.
# Moreover, C-z will crash fim and C-c will terminate it.
# Some other combinations (e.g.:C-l) may have similar problems in your console.
bind 'f' "flip";
bind 'F' "fliponce";
bind 'm' "mirror";
bind 'M' "mirroronce";
bind 'q' "quit";
bind 'Esc' "quit";
#bind 'n' "next_file";
#bind 'n' "next";
bind 'C-h' "help";
#bind '?' "help"; # assigned to back-search
#bind '/' "help"; # assigned to forward-search
bind '=' "scale '100%'";
#bind 'p' "prev_file";
bind 'Del' "list 'remove';reload";
#bind 's' "list 'sort'";
bind ' ' "scroll 'forward'";
bind 'S' "toggleDisplayStatus";
bind 'I' "toggleautonegate";
bind 'i' "color 'negate';redisplay";
bind 'g' "color 'desaturate';redisplay";
bind '[' 'font_reduce;redisplay';
bind ']' 'font_magnify;redisplay';
bind '|' 'toggle_font_auto_scale;redisplay';
bind '{' 'font "prev";redisplay';
bind '}' 'font "next";redisplay';
bind 'G' "toggleDesaturate";
bind 'r' "rotate90";
bind 'R' "rotate270";
bind '+' "magnify";
bind 'a' "scale 'a'";
bind 'H' "scale 'H'";
bind 'Tab' "toggleVerbosity";
bind 'Menu' "toggleVerbosity";
bind 'v' "toggleDisplayStatus";
bind 'A' "A";
bind 'C-m' "list 'mark'";
bind 'u' "list 'unmark'";
bind 'Enter' "list 'mark';goto _lastgotodirection";
bind '-' "reduce";
bind "Up" "pan_up";
bind 'k' "pan_up";
bind "Right" "pan_right";
bind 'l' "pan_right";
bind "Down" "pan_down";
bind 'j' "pan_down";
bind "Left" "pan_left";
bind 'h' "pan_left";
bind 't' "align 'top'";
bind 'C-g' "system 'fbgrab' 'fim_'._device_string.'.png'"; # grab a screenshot
#bind 'C-r' "recording 'start'";
bind 'C-r' "reload ''";
bind 'Q' "recording 'stop'";
bind 'D' "recording 'dump'";
bind 'E' "recording 'execute'";
bind 'C-e' "recording 'execute'";
bind 'C-x' "recording 'execute'";
bind '.' "recording 'repeat_last'";
bind '`' "toggleLimitMarked";
alias "toggleVerbosity" "_display_console=1-_display_console;i:fresh=1;redisplay" "";
alias "toggleKeyVerbosity" "_verbose_keys=1-_verbose_keys;redisplay" "";
alias "toggleDesaturate" "_autodesaturate=1-_autodesaturate;redisplay" "";
alias "idempotent_cmd" "goto ''";
#
# Autocommands examples:
#autocmd "PostInteractiveCommand" "fim.png" "echo '\nmatched an interactive command on fim.png\n'";
#autocmd "PostDisplay" ".*png" "echo 'this is a png file'";
#autocmd "PostDisplay" ".*jpg" "echo 'this is a jpg file'";
#autocmd "PostDisplay" "" "echo '\nthis is a file\n'";
#autocmd "PostGoto" "" "set_interactive_mode";
autocmd "PostGoto" "" "reload";
autocmd "PostWindow" "" "i:fresh=1;redisplay;";
autocmd "PreRedisplay" "" "i:_will_display=1";
autocmd "PreRedisplay" "" "if(_scale_style!='' && i:fresh){i:fresh=0;scale _scale_style ;i:fresh=0;}";
autocmd "PostRedisplay" "" "i:_will_display=0";
# Display device specific config
alias "aalib_fix_do" "{if(aascale==''){ascale='2.0';}else{ascale=aascale;} i:fresh=1;display;if(_TERM=~'screen'){echo 'screen+aalib?expect binding problems!'}}" "See aalib_fix.";
alias "aalib_fix" "if(_device_string=='aa'){aalib_fix_do;scale 'a';}" "When using the aalib (ASCII art) library we face a problem: glyph proportions are seldom square (as pixels are), and are tricky to detect; for this reason, we need to reshape the image with respect to the font ratio, but we have to make a guess in the scaling factor to compensate. If at runtime a better value is known for the terminal font height/with ratio, it may be fed in the 'aascale' variable for an accurate scaling.";
alias "cacalib_fix_do" "{if(cacascale==''){ascale='1.18';}else{scale=cacascale;} i:fresh=1;display;if(_TERM=~'screen'){echo 'screen+cacalib?expect binding problems!'}}" "See cacalib_fix.";
alias "cacalib_fix" "getenv 'DISPLAY';if(_device_string=='caca' && ENV_DISPLAY==''){cacalib_fix_do;scale 'a';}" "When using the libcaca (Coloured ASCII art) library we face a problem: glyph proportions are seldom square (as pixels are), and are tricky to detect; for this reason, we need to reshape the image with respect to the font ratio, but we have to make a guess in the scaling factor to compensate. If at runtime a better value is known for the terminal font height/with ratio, it may be fed in the 'cacascale' variable for an accurate scaling.";
autocmd "PostReload" "" "aalib_fix";
autocmd "PostLoad" "" "aalib_fix";
autocmd "PostReload" "" "cacalib_fix";
autocmd "PostLoad" "" "cacalib_fix";
alias "refresh" "desc 'reload';redisplay;" "reloads and displays image description";
bind "F5" "refresh";
bind "F11" "if(_device_string=='sdl' && !_fullscreen){_old_sw=_screen_width;_old_sh=_screen_height;display 'reinit' 'mW0:0';_fullscreen=1;}else if(_device_string=='sdl' && _old_sw*_old_sh*_fullscreen){display 'reinit' 'rwm'._old_sw.':'._old_sh;_fullscreen=0;}" "Toggles full screen. Will show mouse cursor in full screen.";
autocmd "PostReload" "" "i:fresh=1" ;
autocmd "PostScale" "" "if(0==i:_will_display){i:fresh=1;display;}" ;
autocmd "PostPan" "" "{i:fresh=1;display;}" ;
autocmd "PostReload" "" "if(i:fresh){redisplay;}";
autocmd "PostInteractiveCommand" "" "if(i:fresh){display;i:fresh=0;}";
autocmd "PostInteractiveCommand" "" "if(_want_prefetch>0){prefetch;}";
autocmd "PostInteractiveCommand" "" "if(_display_console==0 && i:fresh){redisplay;i:fresh=0;}";
autocmd "PostInteractiveCommand" "" "idempotent_cmd"; # Bug workaround: without it console scroll is broken.
alias "next10" "i=0;while(i<10){i=i+1;next;display;sleep '1';}" "goes forward 10 images";
alias "prev10" "i=0;while(i<10){i=i+1;prev;display;sleep '1';}" "goes backward 10 images";
bind 'N' 'next10';
bind 'P' 'prev10';
bind 'C-n' "goto '+//'";
bind 'C-p' "goto '-//'";
bind 'C-b' "goto '-//'"; # Warning: many configurations cannot detect C-b.
bind 'W' "display 'resize'" "if supported, resizes the window to match the current image pixels size";
#bind 'C-w' "scale '100%';display 'resize'" "if supported, scales the image to 100% and resizes the window to match its size (if fits)";
bind 'C-w' "if(_scale_style!='w'){_scale_style='w';scale 'w';}else{_scale_style='';scale '100%';}" "scale to width";
alias "endless_slideshow" "while(1){display;sleep '1';next;}" "performs an automated slideshow, endlessly";
alias "bookview" "while(1){display;sleep '2';scroll 'down';}" "";
alias "comicview" "while(1){display;sleep '1';scroll 'down';}" "";
alias "read" "while(1){display;sleep '1';scroll 'forward';}" "";
alias "slowread" "while(1){display;sleep '2';scroll 'forward';}" "";
alias "fastread" "while(1){display;scroll 'forward';}" "proceeds like in a book bug very fast";
alias "pornview" "echo 'press any key repeatedly to terminate' ;endless_slideshow" "enters an endless slideshow";
autocmd "PreExecutionCycle" "/fbps-" "_display_busy=0;_display_status=0" ;
autocmd "PreExecutionCycle" "" "i:fresh=1;reload";
autocmd "PreExecutionCycle" "/fbps-.*ps001.png" "i:fresh=1;redisplay";
## Example in imposing a file loader to an extension:
#autocmd "PreReload" ".*mtx.gz" "_file_loader='MatrixMarket'";
#autocmd "PostReload" ".*mtx.gz" "_file_loader=''";
bind '*' "_display_console=0;toggleVerbosity;echo i:*";
bind 'w' "scale 'w'";
bind '<' "rotate10_ccw;display";
bind '>' "rotate10;display";
bind '_' "_scale_style='';scale '100%'";
bind ',' "_display_console=1;echo _last_system_output";
bind 'C-a' "if(_scale_style!='a'){_scale_style='a';scale 'a';}else{_scale_style='';scale '100%';}" "scale to height";
#
alias "pan_nw" "pan 'nw'" "pans the image to the upper left";
alias "pan_ne" "pan 'ne'" "pans the image to the upper right";
alias "pan_se" "pan 'se'" "pans the image to the lower left";
alias "pan_sw" "pan 'sw'" "pans the image to the lower right";
alias "pan_down" "if(_display_console==0){pan 'down';}else{scd;}" "pans the image down / scrolls console down";
alias "pan_up" "if(_display_console==0){pan 'up' ;}else{scu;}" "pans the image up / scrolls console up";
alias "pan_left" "pan 'left'" "pans the image left";
alias "pan_right" "pan 'right'" "pans the image right";
alias "diagonal_nw" "pan_nw" "pans the image to the upper left";
alias "diagonal_ne" "pan_ne" "pans the image to the upper right";
alias "diagonal_se" "pan_se" "pans the image to the lower left";
alias "diagonal_sw" "pan_sw" "pans the image to the lower right";
bind 'd' "diagonal_nw";
bind 'D' "diagonal_se";
bind 'x' "diagonal_ne";
bind 'X' "diagonal_sw";
alias "toggleDisplayStatus" "_display_status=1-_display_status;redisplay" "";
alias "toggleDisplayBusy" "_display_busy=1-_display_busy" "";
alias "sort" "list 'sort'" "sorts the files list ordered";
bind 'o' "sort";
bind 'b' "prev";
bind 'B' "toggleDisplayBusy";
alias "random_slideshow" "while(1){goto random;}" "performs a shuffled slideshow";
alias "rotate90_ccw" "i:_orientation=i:_orientation+3;i:fresh=1;i:fresh=1;redisplay" "rotate 90 degrees counter clockwise";
alias "rotate90_cw" "i:_orientation=i:_orientation+1;i:fresh=1;i:fresh=1;redisplay" "rotate 90 degrees clockwise";
alias "rotate180" "i:_orientation=i:_orientation+2;i:fresh=1;i:fresh=1;redisplay" "rotate 180 degrees";
alias "rotate90" "rotate90_cw;display" "rotate 90 degrees clockwise";
alias "rotate270" "rotate90_ccw;display" "rotate 90 degrees counter clockwise";
alias "rotate10" "rotate '10';display" "rotate 10 degrees counter clockwise";
alias "rotate10_ccw" "rotate -10 ;display" "rotate 10 degrees clockwise";
bind 'K' 'if(_display_console==0){echo i:_filename.": ".i:_comment;toggleVerbosity}else{toggleVerbosity;}';
bind 'C-k' 'crop' # still experimental
alias 'cache' 'echo _cache_status' "displays cached images status";
bind 'c' 'align "center"';
alias 'widen' 'i:ascale=i:ascale*"1.1";*1.0' "widen the current image";
alias 'narrow' 'i:ascale=i:ascale/"1.1";*1.0' "narrow the current image";
bind 'y' "widen" "widen horizontally the image";
bind 'Y' "narrow" "shrink horizontally the image";
alias 'console_scroll_up' 'if(_console_offset<_console_lines+console_scroll_n-_rows){_console_offset=_console_offset+console_scroll_n;}' "scrolls up the virtual console";
alias 'console_scroll_down' 'if(allow_round_scroll || (_console_offset>=console_scroll_n)){_console_offset=_console_offset-console_scroll_n;}' "scrolls down the virtual console";
alias 'console_scroll_reset' '{_console_offset=0;}';
alias 'scu' 'console_scroll_up' "";
alias 'scd' 'console_scroll_down' "";
alias 'scz' 'console_scroll_reset' "";
alias 'center' 'align "center"';
alias 'left' 'align "left"';
alias 'right' 'align "right"';
alias 'top' 'align "top"';
alias 'bottom' 'align "bottom"';
alias "font_magnify_auto" "if(_fbfont_as_screen_fraction>1){_fbfont_as_screen_fraction=_fbfont_as_screen_fraction-1;}else{_fbfont_as_screen_fraction=_screen_width/100+_screen_height/100;}" "";
alias "font_magnify_manual" "_fbfont_magnify_factor=_fbfont_magnify_factor+1" "";
alias "font_reduce_auto" "if(_fbfont_as_screen_fraction>1){_fbfont_as_screen_fraction=_fbfont_as_screen_fraction+1;}" "";
alias "font_reduce_manual" "_fbfont_magnify_factor=_fbfont_magnify_factor-1" "";
alias "toggle_font_auto_scale" "if(_fbfont_as_screen_fraction<0){_fbfont_as_screen_fraction=0;echo 'Auto font scaling on.';}else{_fbfont_as_screen_fraction=-1;echo 'Auto font scaling off.';}" "toggles between manual and auto font scaling control";
alias 'next_file_dir_same' "goto '+/s';" "go to next file in same dir";
alias 'next_file_dir_other' "goto '+/S';" "go to next file in other dir";
alias 'next_file_dir_up' "goto '+/u';" "go to next file up the dir hierarchy";
alias 'next_file_dir_down' "goto '+/d';" "go to next file down the dir hierarchy";
alias 'next_file_same_basename' "goto '+/b';" "go to next file with same basename";
alias 'prev_file_dir_same' "goto '-/s';" "go to prev file in same dir";
alias 'prev_file_dir_other' "goto '-/S';" "go to prev file in other dir";
alias 'prev_file_dir_up' "goto '-/u';" "go to prev file up the dir hierarchy";
alias 'prev_file_dir_down' "goto '-/d';" "go to prev file down the dir hierarchy";
alias 'prev_file_same_basename' "goto '-/b';" "go to prev file with same basename";
#alias "font_magnify" "if(_fbfont_as_screen_fraction<0) {font_magnify_manual;}else{font_magnify_auto;}" "increase font size (either relative or absolute)";
#alias "font_reduce" "if(_fbfont_as_screen_fraction<0) {font_reduce_manual;} else{font_reduce_auto;}" "increase font size (either relative or absolute)";
alias "font_magnify" "_fbfont_as_screen_fraction=-1;font_magnify_manual" "increase absolute font size and set manual font control";
alias "font_reduce" "_fbfont_as_screen_fraction=-1;font_reduce_manual" "decrease absolute font size and set manual font control";
bind "PageUp" "if(_display_console==0){prev;}else{scu;}";
bind "PageDown" "if(_display_console==0){next;}else{scd;}";
bind "Home" "0;";
bind "End" "$;";
bind "^" "0;";
bind "$" "$;";
#bind "Backspace" "prev"; # console code for C-h and Backspace is the same :-)
bind "'" "goto _lastfileindex";
bind '"' "scale 'shadow';i:fresh=1;redisplay;";
bind '(' "goto '^p'";
bind ')' "goto '$p'";
bind 'Z' "sleep 1";
_display_status=1; # lower status line
_want_wm_caption_status="fim:%N@%p%%%L[%i/%l]";
_info_fmt_str="%p%% %wx%h%L %i/%l%P %F %T %c"; # lower right line part
#_display_status_fmt="%N:%k"; #
_display_status_fmt="%N%?EXIF_DateTimeOriginal?[%:EXIF_DateTimeOriginal:]?%?EXIF_ExposureTime?[%:EXIF_ExposureTime:]?%?EXIF_FNumber?[%:EXIF_FNumber:]?%?EXIF_ApertureValue?[%:EXIF_ApertureValue:]?%?EXIF_ISOSpeedRatings?[ISO%:EXIF_ISOSpeedRatings:]?:%k"; # lower left line part
#_fbfont_as_screen_fraction=-1; # disable auto font scaling
echo "WELCOME: to switch to the command line interface press ':'";
# More examples:
#alias "plisten" 'popen "nc -l -p 9999 "' "executes fim commands coming from port 9999 on this computer";
#alias "wlisten" "while(1){sleep;plisten;}" "listen to a pipe, endlessly";
#alias "musicplay" "system 'mpc' 'play'" "";
#alias "musicpause" "system 'mpc' 'pause'" "";
#alias "rdjpgcom" 'system "rdjpgcom" i:_filename';
# offsetscan usage : need a mechanism for popping all images before.
#alias "offsetscan" "while(i:width<1){list 'push' 'blob.jpg';stdout _open_offset ;_open_offset=_open_offset+1;reload;}";
#alias "webcam" "pread 'vgrabbj -d /dev/video0'";
#alias "webcam_cycle" "while(1){webcam;reload;sleep 1;}";
# This is a FIM initialization file.
# Without it FIM cannot work like it should.
# Feel free to modify it, but with caution!
NOTES
This manual page could be improved. Certain side effects of commands are not documented.
Neither a formal description of the various commands. Interaction of commands and
variables is also not completely documented.
BUGS
The fim language shall be more liberal with quoting.
SEE ALSO
fim(1), fimgs(1), regex(1).
AUTHOR
Michele Martone <dezperado _CUT_ autistici _CUT_ org>
COPYRIGHT
See copyright notice in fim(1).
(c) 2011-2023 Michele Martone fimrc(5)