Provided by: rancid_3.13-2_amd64 
NAME
router.db - rancid group configuration file
DESCRIPTION
router.db contains information for devices which are members of a rancid group.
control_rancid(1) reads this file to compile a list of devices which it should collect.
SYNTAX
One device is listed per-line, where the syntax is:
<device_name>;<device_type>;<state>[;comments]
For example:
scooby.shrubbery.net;cisco;up
The fields are as follows:
<device_name>
The name of the device, which must resolve via gethostbyname, used as the argument
to telnet(1), rsh(1), or ssh(1), to connect to the device. Once converted to
lower-case, this also becomes the name of the file used to store the configuration
under $BASEDIR/<group>/configs.
Experience has shown that using the device's FQDN (Fully Qualified Domain Name)
works best, as in the example above.
<device_type>
The type of device from the set:
agm A Cisco Anomaly Guard Module (aka Riverhead). Suspect that at some point
the UI will become more cisco-like and it can be merged with the IOS rancid
module.
alteon An Alteon WebOS switches.
arcos An Arrcus router.
arista An Arista Networks device.
baynet A Bay Networks router.
bigip A F5 device running BIG-IP >= v11.
cat5 A Cisco catalyst series 5000 and 4000 switches (i.e.: running the catalyst
OS, not IOS).
ciena-ws
A Ciena Waveserver.
cisco A Cisco router, PIX, or switch such as the 3500XL or 6000 running IOS (or
IOS-like) OS, but not IOS-XR, NX-OS or Cisco small business devices.
cisco-sb
A Cisco small business devices.
cisco-nx
A Cisco Nexus switch/router.
cisco-xr
A Cisco device running IOS-XR.
cisco-wlc4
A Cisco Wireless Controller versions up to 4.
cisco-wlc5
A Cisco Wireless Controller versions 5 and above.
css A Cisco content services switch.
enterasys
An enterasys NAS. This is currently an alias for the riverstone device
type.
erx A Juniper E-series edge router.
fss2 A Fujitsu FSS2/1finity device.
dell A Dell switch. Known working models are DES-3010F, DES-3052P, DES-3526,
and DES-3550. Note that Dell OEMs some equipment and has purchased some
companies, so a Dell product may not work with the dell rancid module but
may work with smc or force10.
extreme
An Extreme switch.
ezt3 An ADC-Kentrox EZ-T3 mux.
f5 A F5 BigIP switch.
force10
A Force10 router.
fortigate
A Fortinet firewall.
fortigate-full
A Fortinet firewall with all defaults shown.
foundry
A Foundry router, switch, or router-switch. This includes HP Procurve
switches that are OEMs of Foundry products, such as the HP9304M.
hitachi
A Hitachi router.
hp A HP Procurve switch such as the 2524, 4108 or J9086A (aka. 2610) procurve
switches, J9091A, and J8698A. Also see the foundry type.
juniper
A Juniper router.
mrtd A host running the (Merit) MRTd daemon.
mrv A MRV optical device; including NC316, OptiSwitch 904, OptiSwitch 906G,
OptiSwitch 912C, OptiSwitch 940.
netscaler
A Netscaler load balancer.
netscreen
A Netscreen firewall.
paloalto
A Palo Alto Networks device.
redback
A Redback router, NAS, etc.
riverstone
A Riverstone NAS or Cabletron (starting with version ~9.0.3) router.
routeros
A Mikrotik RouterOS router.
smc A SMC switch, which also account for some Dell OEMs. Including Dell
PowerConnect 35xx (3524, 3524P, 3548, 3548P) and 7048.
sros A Nokia (Alcatel-Lucent) router, such as the 7750 SR.
xirrus A Xirrus array.
zebra Zebra routing software.
<state>
The state is either "up", or some other arbitrary value, e.g. "down". If the
device is not marked "up" the device's configuration will not be collected. It is
highly recommended that comments are made for any router not listed as up, so as to
indicate the reason a router is not to be polled, e.g.:
dial1.paris;cisco;up;
core1.paris;cisco;down;in testing until 5/5/2001.
core2.paris;cisco;ticketed;Ticket 6054234, 5/3/2001
border1.paris;juniper;up;
The script "downreport" in util/ can be used to produce a report of routers in
router.db that are not marked "up".
[comments]
Freeform string to describe the current state of the router.
A ``#'' at the beginning of a line is a comment; the entire line is ignored.
If a device is deleted from the router.db file, then rancid will clean up by removing the
device's config file from $BASEDIR/<group>/configs. The device will be removed from the
revision control system. It is possible, in most cases, to resurrect or check-out copies
of deleted device configurations.
FILES
$BASEDIR/<group>/router.db
Configuration file described here, where <group> is a device group name defined in
the variable LIST_OF_GROUPS within $BASEDIR/etc/rancid.conf.
SEE ALSO
control_rancid(1), rancid(1), rancid.conf(5)
HISTORY
In RANCID releases prior to 3.0, router.db used colons (:) as its field separator. This
was changed to allow IPv6 addresses to be used in router.db.
5 May 2020 router.db(5)