Provided by: lvm2_2.03.16-2ubuntu1_amd64 
NAME
pvscan — List all physical volumes
SYNOPSIS
pvscan option_args position_args
[ option_args ]
[ position_args ]
-a|--activate y|n|ay
--autoactivation String
--cache
--checkcomplete
--commandprofile String
--config String
-d|--debug
--devices PV
--devicesfile String
--driverloaded y|n
-e|--exported
-h|--help
--ignorelockingfailure
--journal String
--listlvs
--listvg
--lockopt String
--longhelp
-j|--major Number
--minor Number
--nohints
--nolocking
--noudevsync
-n|--novolumegroup
--profile String
-q|--quiet
--reportformat basic|json
-s|--short
-t|--test
--udevoutput
-u|--uuid
-v|--verbose
--version
--vgonline
-y|--yes
DESCRIPTION
When called without the --cache option, pvscan lists PVs on the system, like pvs(8) or
pvdisplay(8).
When --cache is used, pvscan updates runtime lvm state on the system, or with -aay
performs autoactivation.
pvscan --cache device
If device is present, lvm records that the PV on device is online. If device is not
present, lvm removes the online record for the PV. pvscan only reads the named device.
pvscan --cache
Updates the runtime state for all lvm devices.
pvscan --cache -aay device
Performs the --cache steps for the device, then checks if the VG using the device is
complete. If so, LVs in the VG are autoactivated, the same as vgchange -aay vgname would
do. (A device name may be replaced with major and minor numbers.)
pvscan --cache -aay
Performs the --cache steps for all devices, then autoactivates any complete VGs.
pvscan --cache --listvg|--listlvs device
Performs the --cache steps for the device, then prints the name of the VG using the
device, or the names of LVs using the device. --checkcomplete is usually included to
check if all PVs for the VG or LVs are online. When this command is called by a udev
rule, the output must conform to udev rule specifications (see --udevoutput.) The udev
rule will use the results to perform autoactivation.
Autoactivation of VGs or LVs can be enabled/disabled using vgchange or lvchange with
--setautoactivation y|n, or by adding names to lvm.conf(5)
activation/auto_activation_volume_list
See lvmautoactivation(7) for more information about how pvscan is used for autoactivation.
USAGE
Display PV information.
pvscan
[ -e|--exported ]
[ -n|--novolumegroup ]
[ -s|--short ]
[ -u|--uuid ]
[ --ignorelockingfailure ]
[ --reportformat basic|json ]
[ COMMON_OPTIONS ]
—
Record that a PV is online or offline.
pvscan --cache
[ -j|--major Number ]
[ --ignorelockingfailure ]
[ --reportformat basic|json ]
[ --minor Number ]
[ --noudevsync ]
[ COMMON_OPTIONS ]
[ String|PV ... ]
—
Record that a PV is online and autoactivate the VG if complete.
pvscan --cache -a|--activate ay
[ -j|--major Number ]
[ --ignorelockingfailure ]
[ --reportformat basic|json ]
[ --minor Number ]
[ --noudevsync ]
[ --autoactivation String ]
[ COMMON_OPTIONS ]
[ String|PV ... ]
—
Record that a PV is online and list the VG using the PV.
pvscan --cache --listvg PV
[ --ignorelockingfailure ]
[ --checkcomplete ]
[ --vgonline ]
[ --udevoutput ]
[ --autoactivation String ]
[ COMMON_OPTIONS ]
—
Record that a PV is online and list LVs using the PV.
pvscan --cache --listlvs PV
[ --ignorelockingfailure ]
[ --checkcomplete ]
[ --vgonline ]
[ COMMON_OPTIONS ]
—
List LVs using the PV.
pvscan --listlvs PV
[ COMMON_OPTIONS ]
—
List the VG using the PV.
pvscan --listvg PV
[ COMMON_OPTIONS ]
—
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
-a|--activate y|n|ay
Auto-activate LVs in a VG when the PVs scanned have completed the VG. (Only ay is
applicable.)
--autoactivation String
Specify if autoactivation is being used from an event. This allows the command to
apply settings that are specific to event activation, such as device scanning
optimizations using pvs_online files created by event-based pvscans.
--cache
Scan one or more devices and record that they are online.
--checkcomplete
Check if all the devices used by a VG or LV are present, and print "complete" or
"incomplete" for each listed VG or LV. This option is used as a part of event-
based autoactivation, so pvscan will do nothing if this option is set and
event_activation=0 in the config settings.
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5) for more
information about profiles.
--config String
Config settings for the command. These override lvm.conf(5) settings. The String
arg uses the same format as lvm.conf(5), or may use section/field syntax. See
lvm.conf(5) for more information about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent
to the log file and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the command. Devices not
listed will appear to be missing. This option can be repeated, or accepts a comma
separated list of devices. This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must exist in
/etc/lvm/devices/ and is managed with the lvmdevices(8) command. This overrides
the lvm.conf(5) devices/devicesfile and devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing and
debugging.
-e|--exported
Only show PVs belonging to exported VGs.
-h|--help
Display help text.
--ignorelockingfailure
Allows a command to continue with read-only metadata operations after locking
failures.
--journal String
Record information in the systemd journal. This information is in addition to
information enabled by the lvm.conf log/journal setting. command: record
information about the command. output: record the default command output. debug:
record full command debugging.
--listlvs
Print a list of LVs that use the device.
--listvg
Print the VG that uses the device.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more
information.
--longhelp
Display long help text.
-j|--major Number
The major number of a device.
--minor Number
The minor number of a device.
--nohints
Do not use the hints file to locate devices for PVs. A command may read more
devices to find PVs when hints are not used. The command will still perform
standard hint file invalidation where appropriate.
--nolocking
Disable locking. Use with caution, concurrent commands may produce incorrect
results.
--noudevsync
Disables udev synchronisation. The process will not wait for notification from
udev. It will continue irrespective of any possible udev processing in the
background. Only use this if udev is not running or has rules that ignore the
devices LVM creates.
-n|--novolumegroup
Only show PVs not belonging to any VG.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once to
also suppress any prompts with answer 'no'.
--reportformat basic|json
Overrides current output format for reports which is defined globally by the
report/output_format setting in lvm.conf(5). basic is the original format with
columns and rows. If there is more than one report per command, each report is
prefixed with the report name for identification. json produces report output in
JSON format. See lvmreport(7) for more information.
-s|--short
Short listing format.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by
disabling all metadata writing but nevertheless returning success to the calling
function. This may lead to unusual error messages in multi-stage operations if a
tool relies on reading back metadata it believes has changed but hasn't.
--udevoutput
Command output is modified to be imported from a udev rule.
-u|--uuid
Show UUIDs in addition to device names.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
to stdout and stderr.
--version
Display version information.
--vgonline
The first command to see a complete VG will report it uniquely. Other commands to
see the complete VG will report it differently.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes. Use
with extreme caution. (For automatic no, see -qq.)
VARIABLES
PV Physical Volume name, a device path under /dev. For commands managing physical
extents, a PV positional arg generally accepts a suffix indicating a range (or
multiple ranges) of physical extents (PEs). When the first PE is omitted, it
defaults to the start of the device, and when the last PE is omitted it defaults to
end. Start and end range (inclusive): PV[:PE-PE]... Start and length range
(counting from 0): PV[:PE+PE]...
String See the option description for information about the string content.
Size[UNIT]
Size is an input number that accepts an optional unit. Input units are always
treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both
refer to 1024. The default input unit is specified by letter, followed by |UNIT.
UNIT represents other possible input units: b|B is bytes, s|S is sectors of 512
bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.
(This should not be confused with the output control --units, where capital letters
mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm. For example,
LVM_VG_NAME can generally be substituted for a required VG parameter.
SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8),
pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8),
vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8),
vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8),
lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)