Provided by: dialog_1.3-20240101-1_amd64 
NAME
dialog - display dialog boxes from shell scripts
SYNOPSIS
dialog --clear
dialog --create-rc file
dialog --print-maxsize
dialog common-options box-options
DESCRIPTION
Dialog is a program that will let you present a variety of questions or display messages using dialog
boxes from a shell script. These types of dialog boxes are implemented (though not all are necessarily
compiled into dialog):
buildlist, calendar, checklist, dselect, editbox, form, fselect, gauge, infobox, inputbox,
inputmenu, menu, mixedform, mixedgauge, msgbox (message), passwordbox, passwordform, pause,
prgbox, programbox, progressbox, radiolist, rangebox, tailbox, tailboxbg, textbox, timebox,
treeview, and yesno (yes/no).
You can put more than one dialog box into a script:
• Use the "--and-widget" token to force dialog to proceed to the next dialog unless you have pressed
ESC to cancel, or
• Simply add the tokens for the next dialog box, making a chain. Dialog stops chaining when the return
code from a dialog is nonzero, e.g., Cancel or No (see DIAGNOSTICS).
Some widgets, e.g., checklist, will write text to dialog's output. Normally that is the standard error,
but there are options for changing this: “--output-fd”, “--stderr” and “--stdout”. No text is written if
the Cancel button (or ESC) is pressed; dialog exits immediately in that case.
OPTIONS
All options begin with “--” (two ASCII hyphens, for the benefit of those using systems with deranged
locale support).
A “--” by itself is used as an escape, i.e., the next token on the command-line is not treated as an
option. This is different from getopt(1), which uses that token to treat the remaining tokens as
parameters rather than options.
dialog --title -- --Not an option
dialog --title This -- --title is not an option
Dialog uses no parameters, and uses its own options parser.
When a common (e.g., non-widget) option is repeated, the last found is the one that is used. Boolean
options are handled specially so they can be cancelled, by adding (or omitting) a “no” modifier after the
leading “--”. For instance, --no-shadow is documented here, but --shadow also is accepted.
The “--args” option tells dialog to list the command-line parameters to the standard error. This is
useful when debugging complex scripts using the “--” and “--file”, since the command-line may be
rewritten as these are expanded.
The “--file” option tells dialog to read parameters from the file named as its value.
dialog --file parameterfile
Blanks not within double-quotes are discarded (use backslashes to quote single characters). The result
is inserted into the command-line, replacing “--file” and its option value. Interpretation of the
command-line resumes from that point. If parameterfile begins with “&”, dialog interprets the following
text as a file descriptor number rather than a filename.
Most widgets accept height and width parameters, which can be used to automatically size the widget to
accommodate multi-line message prompt values:
• If the parameter is negative, dialog uses the screen's size.
• If the parameter is zero, dialog uses minimum size for the widget to display the prompt and data.
• Otherwise, dialog uses the given size for the widget.
Common Options
Most of the common options are reset before processing each widget.
--ascii-lines
Rather than draw graphics lines around boxes, draw ASCII “+” and “-” in the same place. See also
“--no-lines”.
--aspect ratio
This gives you some control over the box dimensions when using auto sizing (specifying 0 for
height and width). It represents width / height. The default is 9, which means 9 characters wide
to every 1 line high.
--backtitle backtitle
Specifies a backtitle string to be displayed on the backdrop, at the top of the screen.
--begin y x
Specify the position of the upper left corner of a dialog box on the screen.
--cancel-label string
Override the label used for “Cancel” buttons.
--clear
Clears the widget screen, keeping only the screen_color background. Use this when you combine
widgets with “--and-widget” to erase the contents of a previous widget on the screen, so it won't
be seen under the contents of a following widget. Understand this as the complement of
“--keep-window”. To compare the effects, use these:
All three widgets visible, staircase effect, ordered 1,2,3:
dialog \
--begin 2 2 --yesno "" 0 0 \
--and-widget --begin 4 4 --yesno "" 0 0 \
--and-widget --begin 6 6 --yesno "" 0 0
Only the last widget is left visible:
dialog \
--clear --begin 2 2 --yesno "" 0 0 \
--and-widget --clear --begin 4 4 --yesno "" 0 0 \
--and-widget --begin 6 6 --yesno "" 0 0
All three widgets visible, staircase effect, ordered 3,2,1:
dialog \
--keep-window --begin 2 2 --yesno "" 0 0 \
--and-widget --keep-window --begin 4 4 --yesno "" 0 0 \
--and-widget --begin 6 6 --yesno "" 0 0
First and third widget visible, staircase effect, ordered 3,1:
dialog \
--keep-window --begin 2 2 --yesno "" 0 0 \
--and-widget --clear --begin 4 4 --yesno "" 0 0 \
--and-widget --begin 6 6 --yesno "" 0 0
Note, if you want to restore original console colors and send your cursor home after the dialog
program has exited, use the clear(1) command. Conversely, if you want to clear the screen and
send your cursor to the lower left after the dialog program has exited, use the
--erase-on-exit option.
--colors
Interpret embedded “\Z” sequences in the dialog text by the following character, which tells
dialog to set colors or video attributes:
• 0 through 7 are the ANSI color numbers used in curses: black, red, green, yellow, blue,
magenta, cyan and white respectively.
• Bold is set by 'b', reset by 'B'.
• Reverse is set by 'r', reset by 'R'.
• Underline is set by 'u', reset by 'U'.
• The settings are cumulative, e.g., “\Zb\Z1” makes the following text bold (perhaps bright)
red.
• Restore normal settings with “\Zn”.
--column-separator string
Tell dialog to split data for radio/checkboxes and menus on the occurrences of the given string,
and to align the split data into columns.
--cr-wrap
Interpret embedded newlines in the dialog text as a newline on the screen. Otherwise, dialog will
only wrap lines where needed to fit inside the text box.
Even though you can control line breaks with this, Dialog will still wrap any lines that are too
long for the width of the box. Without cr-wrap, the layout of your text may be formatted to look
nice in the source code of your script without affecting the way it will look in the dialog.
The cr-wrap feature is implemented subject to these conditions:
• the string contains “\n” and the --no-nl-expand option is not used, or
• the --trim option is used.
For more information, see Whitespace Options.
--create-rc file
When dialog supports run-time configuration, this can be used to dump a sample configuration file
to the file specified by file.
--cursor-off-label
Place the terminal cursor at the end of a button instead of on the first character of the button
label. This is useful to reduce visual confusion when the cursor coloration interacts poorly with
the button-label text colors.
--date-format format
If the host provides strftime, this option allows you to specify the format of the date printed
for the --calendar widget. The time of day (hour, minute, second) are the current local time.
--defaultno
Make the default value of the yes/no box a No. Likewise, treat the default button of widgets that
provide “OK” and “Cancel” as a Cancel. If “--no-cancel” or “--visit-items” are given those
options overrides this, making the default button always “Yes” (internally the same as “OK”).
--default-button string
Set the default (preselected) button in a widget. By preselecting a button, a script makes it
possible for the user to simply press Enter to proceed through a dialog with minimum interaction.
The option's value is the name of the button: ok, yes, cancel, no, help or extra.
Normally the first button in each widget is the default. The first button shown is determined by
the widget together with the “--no-ok” and “--no-cancel” options. If this option is not given,
there is no default button assigned.
--default-item string
Set the default item in a checklist, form or menu box. Normally the first item in the box is the
default.
--erase-on-exit
When dialog exits, remove the dialog widget, erasing the entire screen to its native background
color, and place the terminal cursor at the lower left corner.
--exit-label string
Override the label used for “EXIT” buttons.
--extra-button
Show an extra button, between “OK” and “Cancel” buttons.
The extra button appears between “Yes” and “No” for the yesno widget.
--extra-label string
Override the label used for “Extra” buttons. Note: for inputmenu widgets, this defaults to
“Rename”.
--help Prints the help message to the standard output and exits. The help message is also printed if no
options are given, or if an unrecognized option is given.
--help-button
Show a help-button after “OK” and “Cancel” buttons in boxes which have a list of tagged items
(i.e., checklist, radiolist, menu, and treeview boxes).
The help-button appears after “Yes” and “No” for the yesno widget.
On exit, the return status indicates that the Help button was pressed. Dialog also writes a
message to its output after the token “HELP”:
• If "--item-help" is also given, the item-help text is written.
• Otherwise, the item's tag (the first field) is written.
You can use the --help-tags option and/or set the DIALOG_ITEM_HELP environment variable to modify
these messages and exit-status.
This option can be applied to other widgets, which have an “OK” button, whether or not the
“Cancel” button is used. The return status and output are not treated specially for the other
widgets; the help-button is just an extra button.
--help-label string
Override the label used for “Help” buttons.
--help-status
If the help-button is selected, writes the checklist, radiolist or form information after the
item-help “HELP” information. This can be used to reconstruct the state of a checklist after
processing the help request.
--help-tags
Modify the messages written on exit for --help-button by making them always just the item's tag.
This does not affect the exit status code.
--hfile filename
Display the given file using a textbox when the user presses F1.
--hline string
Display the given string centered at the bottom of the widget.
--ignore
Ignore options that dialog does not recognize. Some well-known ones such as “--icon” are ignored
anyway, but this is a better choice for compatibility with other implementations.
--input-fd fd
Read keyboard input from the given file descriptor. Most dialog scripts read from the standard
input, but the gauge widget reads a pipe (which is always standard input). Some configurations do
not work properly when dialog tries to reopen the terminal. Use this option (with appropriate
juggling of file-descriptors) if your script must work in that type of environment.
--insecure
Makes the password widget friendlier but less secure, by echoing asterisks for each character.
--iso-week
Set the starting point for the week-number shown in the “--calendar” option according to ISO-8601,
which starts numbering with the first week which includes a Thursday in January.
--item-help
Interpret the tags data for checklist, radiolist and menu boxes adding a column which is displayed
in the bottom line of the screen, for the currently selected item.
--keep-tite
When built with ncurses, dialog normally checks to see if it is running in an xterm, and in that
case tries to suppress the initialization strings that would make it switch to the alternate
screen. Switching between the normal and alternate screens is visually distracting in a script
which runs dialog several times. Use this option to allow dialog to use those initialization
strings.
--keep-window
Normally when dialog performs several tailboxbg widgets connected by “--and-widget”, it clears the
old widget from the screen by painting over it. Use this option to suppress that repainting.
At exit, dialog repaints all of the widgets which have been marked with “--keep-window”, even if
they are not tailboxbg widgets. That causes them to be repainted in reverse order. See the
discussion of the “--clear” option for examples.
--last-key
At exit, report the last key which the user entered. This is the curses key code rather than a
symbol or literal character, and is only reported for keys which are bound to an action. It can
be used by scripts to distinguish between two keys which are bound to the same action.
--max-input size
Limit input strings to the given size. If not specified, the limit is 2048.
--no-cancel
Suppress the “Cancel” button in checklist, inputbox and menu box modes. A script can still test
if the user pressed the ESC key to cancel to quit.
--no-collapse
Normally dialog converts tabs to spaces and reduces multiple spaces to a single space for text
which is displayed in a message boxes, etc. Use this option to disable that feature. Note that
dialog will still wrap text, subject to the “--cr-wrap” and “--trim” options.
The no-collapse feature is implemented subject to these conditions:
• the string contains “\n” and the --no-nl-expand option is not used, or
• the --trim option is not used.
For more information, see Whitespace Options.
--no-hot-list
Tells dialog to suppress the hotkey feature for lists, e.g., the checkbox, menus.
Normally, the first uppercase character of a list entry will be highlighted, and typing that
character will move the focus to that entry. This option suppresses both the highlighting and the
movement.
Hotkeys for buttons (“OK” , “Cancel”, etc.) are unaffected.
--no-items
Some widgets (checklist, inputmenu, radiolist, menu) display a list with two columns (a “tag” and
“item”, i.e., “description”). This option tells dialog to read shorter rows, omitting the “item”
part of the list. This is occasionally useful, e.g., if the tags provide enough information.
See also --no-tags. If both options are given, this one is ignored.
--no-kill
Tells dialog to put the tailboxbg box in the background, printing its process id to dialog's
output. SIGHUP is disabled for the background process.
--no-label string
Override the label used for “No” buttons.
--no-lines
Rather than draw lines around boxes, draw spaces in the same place. See also “--ascii-lines”.
--no-mouse
Do not enable the mouse.
--no-nl-expand
Do not convert “\n” substrings of the message/prompt text into literal newlines.
The no-nl-expand feature is used only if the string contains “\n” so that there is something to
convert.
For more information, see Whitespace Options.
--no-ok
Suppress the “OK” button, so that it is not displayed. A script can still test if the user
pressed the “Enter” key to accept the data:
• The “Enter” key is always handled as the “OK” button when the --no-ok option is used. That
is, by default it is bound to the LEAVE virtual key.
When --no-ok is not used, you can use the the Tab key to move the cursor through the fields
and buttons on the widget. In that case, the “Enter” key activates the current button if the
cursor is positioned on a button.
• To provide for the case where you want to activate a button when using --no-ok, there is
another virtual key LEAVE, which activates the current button. By default, ^D (EOF) is bound
to that key.
--no-shadow
Suppress shadows that would be drawn to the right and bottom of each dialog box.
--no-tags
Some widgets (checklist, inputmenu, radiolist, menu) display a list with two columns (a “tag” and
“description”). The tag is useful for scripting, but may not help the user. The --no-tags option
(from Xdialog) may be used to suppress the column of tags from the display. Unlike the --no-items
option, this does not affect the data which is read from the script.
Xdialog does not display the tag column for the analogous buildlist and treeview widgets; dialog
does the same.
Normally dialog allows you to quickly move to entries on the displayed list, by matching a single
character to the first character of the tag. When the --no-tags option is given, dialog matches
against the first character of the description. In either case, the matchable character is
highlighted.
--ok-label string
Override the label used for “OK” buttons.
--output-fd fd
Direct output to the given file descriptor. Most dialog scripts write to the standard error, but
error messages may also be written there, depending on your script.
--separator string
--output-separator string
Specify a string that will separate the output on dialog's output from checklists, rather than a
newline (for --separate-output) or a space. This applies to other widgets such as forms and
editboxes which normally use a newline.
--print-maxsize
Print the maximum size of dialog boxes, i.e., the screen size, to dialog's output. This may be
used alone, without other options.
--print-size
Prints the size of each dialog box to dialog's output when the box is initialized.
--print-text-only string [ height [ width ] ]
Prints the string as it would be wrapped in a message box to dialog's output.
Because the optional height and width default to zero, if they are omitted, dialog autosizes
according to the screen dimensions.
--print-text-size string [ height [ width ] ]
Prints the size of the string as it would be wrapped in a message box, to dialog's output, as
height width
Because the optional height and width parameters default to zero, if they are omitted, dialog
autosizes according to the screen dimensions.
--print-version
Prints dialog's version to dialog's output. This may be used alone, without other options. It
does not cause dialog to exit by itself.
--quoted
Normally dialog quotes the strings returned by checklist's as well as the item-help text. Use
this option to quote all string results as needed (i.e., if the string contains whitespace or a
single or double-quote character).
--reorder
By default, the buildlist widget uses the same order for the output (right) list as for the input
(left). Use this option to tell dialog to use the order in which a user adds selections to the
output list.
--scrollbar
For widgets holding a scrollable set of data, draw a scrollbar on its right-margin. This does not
respond to the mouse.
--separate-output
For certain widgets (buildlist, checklist, treeview), output result one line at a time, with no
quoting. This facilitates parsing by another program.
--separate-widget string
Specify a string that will separate the output on dialog's output from each widget. This is used
to simplify parsing the result of a dialog with several widgets. If this option is not given, the
default separator string is a tab character.
--single-quoted
Use single-quoting as needed (and no quotes if unneeded) for the output of checklist's as well as
the item-help text.
If this option is not set, dialog may use double quotes around each item. In either case, dialog
adds backslashes to make the output useful in shell scripts.
Single quotes would be needed if the string contains whitespace or a single or double-quote
character.
--size-err
Check the resulting size of a dialog box before trying to use it, printing the resulting size if
it is larger than the screen. (This option is obsolete, since all new-window calls are checked).
--sleep secs
Sleep (delay) for the given number of seconds after processing a dialog box.
--stderr
Direct output to the standard error. This is the default, since curses normally writes screen
updates to the standard output.
--stdout
Direct output to the standard output. This option is provided for compatibility with Xdialog,
however using it in portable scripts is not recommended, since curses normally writes its screen
updates to the standard output. If you use this option, dialog attempts to reopen the terminal so
it can write to the display. Depending on the platform and your environment, that may fail.
--tab-correct
Convert each tab character to one or more spaces (for the textbox widget; otherwise to a single
space). Otherwise, tabs are rendered according to the curses library's interpretation. The
--no-collapse option disables tab expansion.
--tab-len n
Specify the number of spaces that a tab character occupies if the “--tab-correct” option is given.
The default is 8. This option is only effective for the textbox widget.
--time-format format
If the host provides strftime, this option allows you to specify the format of the time printed
for the --timebox widget. The day, month, year values in this case are for the current local
time.
--timeout secs
Timeout if no user response within the given number of seconds. A timeout of zero seconds is
ignored.
Normally a timeout causes an ESC character to be entered in the current widget, cancelling it.
Other widgets may still be on the screen; these are not cancelled. Set the DIALOG_TIMEOUT
environment variable to tell dialog to directly exit instead, i.e., cancelling all widgets on the
screen.
This option is ignored by the “--pause” widget. It is also overridden if the background
“--tailboxbg” option is used to set up multiple concurrent widgets.
--title title
Specifies a title string to be displayed at the top of the dialog box.
--trace filename
logs the command-line parameters, keystrokes and other information to the given file. If dialog
reads a configure file, it is logged as well. Piped input to the gauge widget is logged. Use
control/T to log a picture of the current dialog window.
The dialog program handles some command-line parameters specially, and removes them from the
parameter list as they are processed. For example, if the first option is --trace, then that is
processed (and removed) before dialog initializes the display.
--week-start day
sets the starting day for the week, used in the “--calendar” option. The day parameter can be
• a number (0 to 6, Sunday through Saturday using POSIX) or
• the special value “locale” (this works with systems using glibc, providing an extension to the
locale command, the first_weekday value).
• a string matching one of the abbreviations for the day of the week shown in the calendar
widget, e.g., “Mo” for “Monday”.
--trim eliminate leading blanks, trim literal newlines and repeated blanks from message text.
The trim feature is implemented subject to these conditions:
• the string does not contain “\n” or
• the --no-nl-expand option is used.
For more information, see Whitespace Options.
See also the “--cr-wrap” and “--no-collapse” options.
--version
Prints dialog's version to the standard output, and exits. See also “--print-version”.
--visit-items
Modify the tab-traversal of checklist, radiolist, menubox and inputmenu to include the list of
items as one of the states. This is useful as a visual aid, i.e., the cursor position helps some
users.
When this option is given, the cursor is initially placed on the list. Abbreviations (the first
letter of the tag) apply to the list items. If you tab to the button row, abbreviations apply to
the buttons.
--yes-label string
Override the label used for “Yes” buttons.
Box Options
All dialog boxes have at least three parameters:
text the caption or contents of the box.
height the height of the dialog box.
width the width of the dialog box.
Other parameters depend on the box type.
--buildlist text height width list-height [ tag item status ] ...
A buildlist dialog displays two lists, side-by-side. The list on the left shows unselected items.
The list on the right shows selected items. As items are selected or unselected, they move
between the lists.
Use a carriage return or the “OK” button to accept the current value in the selected-window and
exit. The results are written using the order displayed in the selected-window.
The initial on/off state of each entry is specified by status.
The dialog behaves like a menu, using the --visit-items to control whether the cursor is allowed
to visit the lists directly.
• If --visit-items is not given, tab-traversal uses two states (OK/Cancel).
• If --visit-items is given, tab-traversal uses four states (Left/Right/OK/Cancel).
Whether or not --visit-items is given, it is possible to move the highlight between the two lists
using the default “^” (left-column) and “$” (right-column) keys.
On exit, a list of the tag strings of those entries that are turned on will be printed on dialog's
output.
If the "--separate-output" option is not given, the strings will be quoted as needed to make it
simple for scripts to separate them. By default, this uses double-quotes, as needed. See the
“--single-quoted” option, which modifies the quoting behavior.
--calendar text height width day month year
A calendar box displays month, day and year in separately adjustable windows. If the values for
day, month or year are missing or negative, the current date's corresponding values are used. You
can increment or decrement any of those using the left-, up-, right-, and down-arrows. Use vi-
style h, j, k and l for moving around the array of days in a month. Use tab or backtab to move
between windows. If the year is given as zero, the current date is used as an initial value.
On exit, the date is printed in the form day/month/year. The format can be overridden using the
--date-format option.
--checklist text height width list-height [ tag item status ] ...
A checklist box is similar to a menu box; there are multiple entries presented in the form of a
menu. Another difference is that you can indicate which entry is currently selected, by setting
its status to on. Instead of choosing one entry among the entries, each entry can be turned on or
off by the user. The initial on/off state of each entry is specified by status.
On exit, a list of the tag strings of those entries that are turned on will be printed on dialog's
output.
If the “--separate-output” option is not given, the strings will be quoted as needed to make it
simple for scripts to separate them. By default, this uses double-quotes (as needed). See the
“--single-quoted” option, which modifies the quoting behavior.
--dselect filepath height width
The directory-selection dialog displays a text-entry window in which you can type a directory, and
above that a windows with directory names.
Here filepath can be a filepath in which case the directory window will display the contents of
the path and the text-entry window will contain the preselected directory.
Use tab or arrow keys to move between the windows. Within the directory window, use the up/down
arrow keys to scroll the current selection. Use the space-bar to copy the current selection into
the text-entry window.
Typing any printable characters switches focus to the text-entry window, entering that character
as well as scrolling the directory window to the closest match.
Use a carriage return or the “OK” button to accept the current value in the text-entry window and
exit.
On exit, the contents of the text-entry window are written to dialog's output.
--editbox filepath height width
The edit-box dialog displays a copy of the file. You may edit it using the backspace, delete and
cursor keys to correct typing errors. It also recognizes pageup/pagedown. Unlike the --inputbox,
you must tab to the “OK” or “Cancel” buttons to close the dialog. Pressing the “Enter” key within
the box will split the corresponding line.
On exit, the contents of the edit window are written to dialog's output.
--form text height width formheight [ label y x item y x flen ilen ] ...
The form dialog displays a form consisting of labels and fields, which are positioned on a
scrollable window by coordinates given in the script. The field length flen and input-length ilen
tell how long the field can be. The former defines the length shown for a selected field, while
the latter defines the permissible length of the data entered in the field.
• If flen is zero, the corresponding field cannot be altered. and the contents of the field
determine the displayed-length.
• If flen is negative, the corresponding field cannot be altered, and the negated value of flen
is used as the displayed-length.
• If ilen is zero, it is set to flen.
Use up/down arrows (or control/N, control/P) to move between fields. Use tab to move between
windows.
On exit, the contents of the form-fields are written to dialog's output, each field separated by a
newline. The text used to fill non-editable fields (flen is zero or negative) is not written out.
--fselect filepath height width
The fselect (file-selection) dialog displays a text-entry window in which you can type a filename
(or directory), and above that two windows with directory names and filenames.
Here filepath can be a filepath in which case the file and directory windows will display the
contents of the path and the text-entry window will contain the preselected filename.
Use tab or arrow keys to move between the windows. Within the directory or filename windows, use
the up/down arrow keys to scroll the current selection. Use the space-bar to copy the current
selection into the text-entry window.
Typing any printable characters switches focus to the text-entry window, entering that character
as well as scrolling the directory and filename windows to the closest match.
Typing the space character forces dialog to complete the current name (up to the point where there
may be a match against more than one entry).
Use a carriage return or the “OK” button to accept the current value in the text-entry window and
exit.
On exit, the contents of the text-entry window are written to dialog's output.
--gauge text height width [percent]
A gauge box displays a meter along the bottom of the box. The meter indicates the percentage.
New percentages are read from standard input, one integer per line. The meter is updated to
reflect each new percentage. If the standard input reads the string “XXX”, then the first line
following is taken as an integer percentage, then subsequent lines up to another “XXX” are used
for a new prompt. The gauge exits when EOF is reached on the standard input.
The percent value denotes the initial percentage shown in the meter. If not specified, it is
zero.
On exit, no text is written to dialog's output. The widget accepts no input, so the exit status
is always OK.
--infobox text height width
An info box is basically a message box. However, in this case, dialog will exit immediately after
displaying the message to the user. The screen is not cleared when dialog exits, so that the
message will remain on the screen until the calling shell script clears it later. This is useful
when you want to inform the user that some operations are carrying on that may require some time
to finish.
On exit, no text is written to dialog's output. An OK exit status is returned.
--inputbox text height width [init]
An input box is useful when you want to ask questions that require the user to input a string as
the answer. If init is supplied it is used to initialize the input string. When entering the
string, the backspace, delete and cursor keys can be used to correct typing errors. If the input
string is longer than can fit in the dialog box, the input field will be scrolled.
On exit, the input string will be printed on dialog's output.
--inputmenu text height width menu-height [ tag item ] ...
An inputmenu box is very similar to an ordinary menu box. There are only a few differences
between them:
1. The entries are not automatically centered but left adjusted.
2. An extra button (called Rename) is implied to rename the current item when it is pressed.
3. It is possible to rename the current entry by pressing the Rename button. Then dialog will
write the following on dialog's output.
RENAMED <tag> <item>
--menu text height width menu-height [ tag item ] ...
As its name suggests, a menu box is a dialog box that can be used to present a list of choices in
the form of a menu for the user to choose. Choices are displayed in the order given. Each menu
entry consists of a tag string and an item string. The tag gives the entry a name to distinguish
it from the other entries in the menu. The item is a short description of the option that the
entry represents. The user can move between the menu entries by pressing the cursor keys, the
first letter of the tag as a hot-key, or the number keys 1 through 9. There are menu-height
entries displayed in the menu at one time, but the menu will be scrolled if there are more entries
than that.
On exit the tag of the chosen menu entry will be printed on dialog's output. If the
“--help-button” option is given, the corresponding help text will be printed if the user selects
the help button.
--mixedform text height width formheight [ label y x item y x flen ilen itype ] ...
The mixedform dialog displays a form consisting of labels and fields, much like the --form dialog.
It differs by adding a field-type parameter to each field's description. Each bit in the type
denotes an attribute of the field:
1 hidden, e.g., a password field.
2 readonly, e.g., a label.
--mixedgauge text height width percent [ tag1 item1 ] ...
A mixedgauge box displays a meter along the bottom of the box. The meter indicates the
percentage.
It also displays a list of the tag- and item-values at the top of the box. See dialog(3) for the
tag values.
The text is shown as a caption between the list and meter. The percent value denotes the initial
percentage shown in the meter.
No provision is made for reading data from the standard input as --gauge does.
On exit, no text is written to dialog's output. The widget accepts no input, so the exit status
is always OK.
--msgbox text height width
A message box is very similar to a yes/no box. The only difference between a message box and a
yes/no box is that a message box has only a single OK button. You can use this dialog box to
display any message you like. After reading the message, the user can press the ENTER key so that
dialog will exit and the calling shell script can continue its operation.
If the message is too large for the space, dialog may allow you to scroll it, provided that the
underlying curses implementation is capable enough. In this case, a percentage is shown in the
base of the widget.
On exit, no text is written to dialog's output. Only an “OK” button is provided for input, but an
ESC exit status may be returned.
--pause text height width seconds
A pause box displays a meter along the bottom of the box. The meter indicates how many seconds
remain until the end of the pause. The pause exits when timeout is reached or the user presses
the OK button (status OK) or the user presses the CANCEL button or Esc key.
--passwordbox text height width [init]
A password box is similar to an input box, except that the text the user enters is not displayed.
This is useful when prompting for passwords or other sensitive information. Be aware that if
anything is passed in “init”, it will be visible in the system's process table to casual snoopers.
Also, it is very confusing to the user to provide them with a default password they cannot see.
For these reasons, using “init” is highly discouraged. See “--insecure” if you do not care about
your password.
On exit, the input string will be printed on dialog's output.
--passwordform text height width formheight [ label y x item y x flen ilen ] ...
This is identical to --form except that all text fields are treated as password widgets rather
than inputbox widgets.
--prgbox text command height width
--prgbox command height width
A prgbox is very similar to a programbox.
This dialog box is used to display the output of a command that is specified as an argument to
prgbox.
After the command completes, the user can press the ENTER key so that dialog will exit and the
calling shell script can continue its operation.
If four parameters are given, it displays the text under the title, delineated from the scrolling
file's contents. If only three parameters are given, this text is omitted.
--programbox text height width
--programbox height width
A programbox is very similar to a progressbox. The only difference between a program box and a
progress box is that a program box displays an OK button (but only after the command completes).
This dialog box is used to display the piped output of a command. After the command completes,
the user can press the ENTER key so that dialog will exit and the calling shell script can
continue its operation.
If three parameters are given, it displays the text under the title, delineated from the scrolling
file's contents. If only two parameters are given, this text is omitted.
--progressbox text height width
--progressbox height width
A progressbox is similar to an tailbox, except that
a) rather than displaying the contents of a file,
it displays the piped output of a command and
b) it will exit when it reaches the end of the file
(there is no “OK” button).
If three parameters are given, it displays the text under the title, delineated from the scrolling
file's contents. If only two parameters are given, this text is omitted.
--radiolist text height width list-height [ tag item status ] ...
A radiolist box is similar to a menu box. The only difference is that you can indicate which
entry is currently selected, by setting its status to on.
On exit, the tag of the selected item is written to dialog's output.
--rangebox text height width min-value max-value default-value
Allow the user to select from a range of values, e.g., using a slider. The dialog shows the
current value as a bar (like the gauge dialog). Tabs or arrow keys move the cursor between the
buttons and the value. When the cursor is on the value, you can edit it by:
left/right cursor movement to select a digit to modify
+/- characters to increment/decrement the digit by one
0 through 9
to set the digit to the given value
Some keys are also recognized in all cursor positions:
home/end
set the value to its maximum or minimum
pageup/pagedown
increment the value so that the slider moves by one column
--tailbox file height width
Display text from a file in a dialog box, as in a “tail -f” command. Scroll left/right using vi-
style 'h' and 'l', or arrow-keys. A '0' resets the scrolling.
On exit, no text is written to dialog's output. Only an “OK” button is provided for input, but an
ESC exit status may be returned.
--tailboxbg file height width
Display text from a file in a dialog box as a background task, as in a “tail -f &” command.
Scroll left/right using vi-style 'h' and 'l', or arrow-keys. A '0' resets the scrolling.
Dialog treats the background task specially if there are other widgets (--and-widget) on the
screen concurrently. Until those widgets are closed (e.g., an “OK”), dialog will perform all of
the tailboxbg widgets in the same process, polling for updates. You may use a tab to traverse
between the widgets on the screen, and close them individually, e.g., by pressing ENTER. Once the
non-tailboxbg widgets are closed, dialog forks a copy of itself into the background, and prints
its process id if the “--no-kill” option is given.
On exit, no text is written to dialog's output. Only an “EXIT” button is provided for input, but
an ESC exit status may be returned.
NOTE: Older versions of dialog forked immediately and attempted to update the screen individually.
Besides being bad for performance, it was unworkable. Some older scripts may not work properly
with the polled scheme.
--textbox file height width
A text box lets you display the contents of a text file in a dialog box. It is like a simple text
file viewer. The user can move through the file by using the cursor, page-up, page-down and
HOME/END keys available on most keyboards. If the lines are too long to be displayed in the box,
the LEFT/RIGHT keys can be used to scroll the text region horizontally. You may also use vi-style
keys h, j, k, and l in place of the cursor keys, and B or N in place of the page-up and page-down
keys. Scroll up/down using vi-style 'k' and 'j', or arrow-keys. Scroll left/right using vi-style
'h' and 'l', or arrow-keys. A '0' resets the left/right scrolling. For more convenience, vi-
style forward and backward searching functions are also provided.
On exit, no text is written to dialog's output. Only an “EXIT” button is provided for input, but
an ESC exit status may be returned.
--timebox text height [width hour minute second]
A dialog is displayed which allows you to select hour, minute and second. If the values for hour,
minute or second are missing or negative, the current date's corresponding values are used. You
can increment or decrement any of those using the left-, up-, right- and down-arrows. Use tab or
backtab to move between windows.
On exit, the result is printed in the form hour:minute:second. The format can be overridden using
the --time-format option.
--treeview text height width list-height [ tag item status depth ] ...
Display data organized as a tree. Each group of data contains a tag, the text to display for the
item, its status (“on” or “off”) and the depth of the item in the tree.
Only one item can be selected (like the radiolist). The tag is not displayed.
On exit, the tag of the selected item is written to dialog's output.
--yesno text height width
A yes/no dialog box of size height rows by width columns will be displayed. The string specified
by text is displayed inside the dialog box. If this string is too long to fit in one line, it
will be automatically divided into multiple lines at appropriate places. The text string can also
contain the sub-string "\n" or newline characters `\n' to control line breaking explicitly. This
dialog box is useful for asking questions that require the user to answer either yes or no. The
dialog box has a Yes button and a No button, in which the user can switch between by pressing the
TAB key.
On exit, no text is written to dialog's output. In addition to the “Yes” and “No” exit codes (see
DIAGNOSTICS) an ESC exit status may be returned.
The codes used for “Yes” and “No” match those used for “OK” and “Cancel”, internally no
distinction is made.
Obsolete Options
--beep This was used to tell the original cdialog that it should make a beep when the separate processes
of the tailboxbg widget would repaint the screen.
--beep-after
Beep after a user has completed a widget by pressing one of the buttons.
Whitespace Options
These options can be used to transform whitespace (space, tab, newline) as dialog reads the script:
--cr-wrap, --no-collapse, --no-nl-expand, and --trim
The options are not independent:
• Dialog checks if the script contains at least one “\n” and (unless --no-nl-expand is set) will ignore
the --no-collapse and --trim options.
• After checking for “\n” and the --no-nl-expand option, dialog handles the --trim option.
If the --trim option takes effect, then dialog ignores --no-collapse. It changes sequences of tabs,
spaces (and newlines unless -cr-wrap is set) to a single space.
• If neither the “\n” or --trim cases apply, dialog checks --no-collapse to decide whether to reduce
sequences of tabs and spaces to a single space.
In this case, dialog ignores --cr-wrap and does not modify newlines.
Taking those dependencies into account, here is a table summarizing the behavior for the various
combinations of options. The table assumes that the script contains at least one “\n” when the
--no-nl-expand option is not set.
cr- no- no- trim Result
wrap collapse nl-expand
───────────────────────────────────────────────────────────────────
no no no no Convert tab to space.
Convert newline to space.
Convert “\n” to newline.
no no no yes Convert tab to space.
Convert newline to space.
Convert “\n” to newline.
no no yes no Convert tab to space. Do not
convert newline to space.
Convert multiple-space to
single. Show “\n” literally.
no no yes yes Convert tab to space.
Convert multiple-space to
single. Convert newline to
space. Show “\n” literally.
no yes no no Convert newline to space.
Convert “\n” to newline.
no yes no yes Convert newline to space.
Convert “\n” to newline.
no yes yes no Do not convert newline to
space. Do not reduce
multiple blanks. Show “\n”
literally.
no yes yes yes Convert multiple-space to
single. Convert newline to
space. Show “\n” literally.
yes no no no Convert tab to space. Wrap
on newline. Convert “\n” to
newline.
yes no no yes Convert tab to space. Wrap
on newline. Convert “\n” to
newline.
yes no yes no Convert tab to space. Do not
convert newline to space.
Convert multiple-space to
single. Show “\n” literally.
yes no yes yes Convert tab to space.
Convert multiple-space to
single. Wrap on newline.
Show “\n” literally.
yes yes no no Wrap on newline. Convert
“\n” to newline.
yes yes no yes Wrap on newline. Convert
“\n” to newline.
yes yes yes no Do not convert newline to
space. Do not reduce
multiple blanks. Show “\n”
literally.
yes yes yes yes Convert multiple-space to
single. Wrap on newline.
Show “\n” literally.
RUN-TIME CONFIGURATION
1. Create a sample configuration file by typing:
dialog --create-rc file
2. At start, dialog determines the settings to use as follows:
a) if environment variable DIALOGRC is set, its value determines the name of the configuration file.
b) if the file in (a) is not found, use the file $HOME/.dialogrc as the configuration file.
c) if the file in (b) is not found, try using the GLOBALRC file determined at compile-time, i.e.,
/etc/dialogrc.
d) if the file in (c) is not found, use compiled in defaults.
3. Edit the sample configuration file and copy it to some place that dialog can find, as stated in step
2 above.
KEY BINDINGS
You can override or add to key bindings in dialog by adding to the configuration file. Dialog's bindkey
command maps single keys to its internal coding.
bindkey widget curses_key dialog_key
The widget name can be “*” (all widgets), or specific widgets such as textbox. Specific widget bindings
override the “*” bindings. User-defined bindings override the built-in bindings.
The curses_key can be expressed in different forms:
• It may be any of the names derived from curses.h, e.g., “HELP” from “KEY_HELP”.
• Dialog also recognizes ANSI control characters such as “^A”, “^?”, as well as C1-controls such as
“~A” and “~?”.
• Finally, dialog allows backslash escapes as in C. Those can be octal character values such as “\033”
(the ASCII escape character), or the characters listed in this table:
Escaped Actual
───────────────────────────────
\b backspace
\f form feed
\n new line (line feed)
\r carriage return
\s space
\t tab
\^ “^” (caret)
\? “?” (question mark)
\\ “\” (backslash)
───────────────────────────────
Dialog's internal keycode names correspond to the DLG_KEYS_ENUM type in dlg_keys.h, e.g., “HELP” from
“DLGK_HELP”.
Widget Names
Some widgets (such as the formbox) have an area where fields can be edited. Those are managed in a
subwindow of the widget, and may have separate keybindings from the main widget because the subwindows
are registered using a different name.
Widget Window name Subwindow Name
───────────────────────────────────────────
calendar calendar
checklist checklist
editbox editbox editbox2
form formbox formfield
fselect fselect fselect2
inputbox inputbox inputbox2
menu menubox menu
msgbox msgbox
pause pause
progressbox progressbox
radiolist radiolist
tailbox tailbox
textbox textbox searchbox
timebox timebox
yesno yesno
───────────────────────────────────────────
Some widgets are actually other widgets, using internal settings to modify the behavior. Those use the
same widget name as the actual widget:
Widget Actual Widget
─────────────────────────────
dselect fselect
infobox msgbox
inputmenu menu
mixedform form
passwordbox inputbox
passwordform form
prgbox progressbox
programbox progressbox
tailboxbg tailbox
─────────────────────────────
Built-in Bindings
This manual page does not list the key bindings for each widget, because that detailed information can be
obtained by running dialog. If you have set the --trace option, dialog writes the key-binding
information for each widget as it is registered.
A few bindings are built-in, independent of particular widgets:
Key Purpose
───────────────────────────────────────────────────────────────────
Control-I forward tab-traversal, e.g., with --tailboxbg.
Control-L repaints the screen.
Control-T writes a screen dump to the --trace file.
Control-V suppresses special-keys for the next input byte.
DLGK_FIELD_NEXT forward tab-traversal, like Control-I.
DLGK_FIELD_PREV backward tab-traversal, like back-tab.
DLGK_HELPFILE displays the help-file specified with --hfile.
KEY_BTAB backward tab-traversal, e.g., with --tailboxbg.
───────────────────────────────────────────────────────────────────
Example
Normally dialog uses different keys for navigating between the buttons and editing part of a dialog
versus navigating within the editing part. That is, tab (and back-tab) traverse buttons (or between
buttons and the editing part), while arrow keys traverse fields within the editing part. Tabs are also
recognized as a special case for traversing between widgets, e.g., when using multiple tailboxbg widgets.
Some users may wish to use the same key for traversing within the editing part as for traversing between
buttons. The form widget is written to support this sort of redefinition of the keys, by adding a
special group in dlgk_keys.h for “form” (left/right/next/prev). Here is an example binding demonstrating
how to do this:
bindkey formfield TAB form_NEXT
bindkey formbox TAB form_NEXT
bindkey formfield BTAB form_prev
bindkey formbox BTAB form_prev
That type of redefinition would not be useful in other widgets, e.g., calendar, due to the potentially
large number of fields to traverse.
EXIT STATUS
Exit status is subject to being overridden by environment variables. The default values and
corresponding environment variables that can override them are:
0 if the YES or OK button is pressed (DIALOG_OK).
1 if the No or Cancel button is pressed (DIALOG_CANCEL).
2 if the Help button is pressed (DIALOG_HELP),
except as noted below about DIALOG_ITEM_HELP.
3 if the Extra button is pressed (DIALOG_EXTRA).
4 if the Help button is pressed,
and the --item-help option is set
and the DIALOG_ITEM_HELP environment variable is set to 4.
While any of the exit-codes can be overridden using environment variables, this special case was
introduced in 2004 to simplify compatibility. Dialog uses DIALOG_ITEM_HELP (4) internally, but
unless the environment variable is also set, it changes that to DIALOG_HELP (2) on exit.
5 if a timeout expires and the DIALOG_TIMEOUT variable is set to 5.
-1 if errors occur inside dialog (DIALOG_ERROR) or dialog exits because the ESC key (DIALOG_ESC) was
pressed.
ENVIRONMENT
DIALOGOPTS Define this variable to apply any of the common options to each widget. Most of the
common options are reset before processing each widget. If you set the options in this
environment variable, they are applied to dialog's state after the reset. As in the
“--file” option, double-quotes and backslashes are interpreted.
The “--file” option is not considered a common option (so you cannot embed it within this
environment variable).
DIALOGRC Define this variable if you want to specify the name of the configuration file to use.
DIALOG_CANCEL
DIALOG_ERROR
DIALOG_ESC
DIALOG_EXTRA
DIALOG_HELP
DIALOG_ITEM_HELP
DIALOG_TIMEOUT
DIALOG_OK Define any of these variables to change the exit code on
• Cancel (1),
• error (-1),
• ESC (255),
• Extra (3),
• Help (2),
• Help with --item-help (2),
• Timeout (5), or
• OK (0).
Normally shell scripts cannot distinguish between -1 and 255.
DIALOG_TTY Set this variable to “1” to provide compatibility with older versions of dialog which
assumed that if the script redirects the standard output, that the “--stdout” option was
given.
FILES
$HOME/.dialogrc default configuration file
PORTABILITY
Dialog works with X/Open curses. However, some implementations have deficiencies:
• HPUX curses (and perhaps others) do not open the terminal properly for the newterm function. This
interferes with dialog's --input-fd option, by preventing cursor-keys and similar escape sequences
from being recognized.
• NetBSD 5.1 curses has incomplete support for wide-characters. dialog will build, but not all
examples display properly.
COMPATIBILITY
You may want to write scripts which run with other dialog “clones”.
Original Dialog
First, there is the “original” dialog program to consider (versions 0.3 to 0.9). It had some misspelled
(or inconsistent) options. The dialog program maps those deprecated options to the preferred ones. They
include:
Option Treatment
─────────────────────────────────
--beep-after ignored
--guage mapped to --gauge
─────────────────────────────────
Xdialog
This is an X application, rather than a terminal program. With some care, it is possible to write useful
scripts that work with both Xdialog and dialog.
The dialog program ignores these options which are recognized by Xdialog:
Option Treatment
───────────────────────────────────────────────
--allow-close ignored
--auto-placement ignored
--fixed-font ignored
--icon ignored
--keep-colors ignored
--no-close ignored
--no-cr-wrap ignored
--screen-center ignored
--separator mapped to --separate-output
--smooth ignored
--under-mouse ignored
--wmclass ignored
───────────────────────────────────────────────
Xdialog's manpage has a section discussing its compatibility with dialog. There are some differences not
shown in the manpage. For example, the html documentation states
Note: former Xdialog releases used the “\n” (line feed) as a results separator for the checklist
widget; this has been changed to “/” in Xdialog v1.5.0 to make it compatible with (c)dialog. In
your old scripts using the Xdialog checklist, you will then have to add the --separate-output
option before the --checklist one.
Dialog has not used a different separator; the difference was likely due to confusion regarding some
script.
Whiptail
Then there is whiptail. For practical purposes, it is maintained by Debian (very little work is done by
its upstream developers). Its documentation (README.whiptail) claims
whiptail(1) is a lightweight replacement for dialog(1),
to provide dialog boxes for shell scripts.
It is built on the
newt windowing library rather than the ncurses library, allowing
it to be smaller in embedded environments such as installers,
rescue disks, etc.
whiptail is designed to be drop-in compatible with dialog, but
has less features: some dialog boxes are not implemented, such
as tailbox, timebox, calendarbox, etc.
Comparing actual sizes (Debian testing, 2007/1/10): The total of sizes for whiptail, the newt, popt and
slang libraries is 757 KB. The comparable number for dialog (counting ncurses) is 520 KB. Disregard the
first paragraph.
The second paragraph is misleading, since whiptail also does not work for common options of dialog, such
as the gauge box. whiptail is less compatible with dialog than the original mid-1990s dialog 0.4
program.
whiptail's manpage borrows features from dialog, e.g., but oddly cites only dialog versions up to 0.4
(1994) as a source. That is, its manpage refers to features which were borrowed from more recent
versions of dialog, e.g.,
• --gauge (from 0.5)
• --passwordbox (from Debian changes in 1999),
• --default-item (from dialog 2000/02/22),
• --output-fd (from dialog 2002/08/14).
Debian uses whiptail for the official dialog variation.
The dialog program ignores or maps these options which are recognized by whiptail:
Option Treatment
───────────────────────────────────────────
--cancel-button mapped to --cancel-label
--fb ignored
--fullbutton ignored
--no-button mapped to --no-label
--nocancel mapped to --no-cancel
--noitem mapped to --no-items
--notags mapped to --no-tags
--ok-button mapped to --ok-label
--scrolltext mapped to --scrollbar
--topleft mapped to --begin 0 0
--yes-button mapped to --yes-label
───────────────────────────────────────────
There are visual differences which are not addressed by command-line options:
• dialog centers lists within the window. whiptail typically puts lists against the left margin.
• whiptail uses angle brackets (“<” and “>”) for marking buttons. dialog uses square brackets.
• whiptail marks the limits of subtitles with vertical bars. dialog does not mark the limits.
• whiptail attempts to mark the top/bottom cells of a scrollbar with up/down arrows. When it cannot do
this, it fills those cells with the background color of the scrollbar and confusing the user. dialog
uses the entire scrollbar space, thereby getting better resolution.
BUGS
Perhaps.
EXAMPLES
The dialog sources contain several samples of how to use the different box options and how they look.
Just take a look into the directory samples/ of the source.
AUTHORS
Thomas E. Dickey (updates for 0.9b and beyond)
Kiran Cherupally – the mixed form and mixed gauge widgets.
Tobias C. Rittweiler
Valery Reznic – the form and progressbox widgets.
Yura Kalinichenko adapted the gauge widget as “pause”.
This is a rewrite (except as needed to provide compatibility) of the earlier version of dialog 0.9a,
which lists as authors:
• Savio Lam – version 0.3, “dialog”
• Stuart Herbert – patch for version 0.4
• Marc Ewing – the gauge widget.
• Pasquale De Marco “Pako” – version 0.9a, “cdialog”
2024-01-01 DIALOG()