Provided by: findutils_4.9.0-5build1_amd64 bug

NAME

       find - search for files in a directory hierarchy

SYNOPSIS

       find [-H] [-L] [-P] [-D debugopts] [-Olevel] [starting-point...] [expression]

DESCRIPTION

       This  manual page documents the GNU version of find.  GNU find searches the directory tree
       rooted at each given starting-point by evaluating the given expression from left to right,
       according  to  the rules of precedence (see section OPERATORS), until the outcome is known
       (the left hand side is false for and operations, true for or), at which point  find  moves
       on to the next file name.  If no starting-point is specified, `.' is assumed.

       If  you  are  using find in an environment where security is important (for example if you
       are using it to search directories that are writable by other users), you should read  the
       `Security  Considerations' chapter of the findutils documentation, which is called Finding
       Files and comes with findutils.  That  document  also  includes  a  lot  more  detail  and
       discussion than this manual page, so you may find it a more useful source of information.

OPTIONS

       The -H, -L and -P options control the treatment of symbolic links.  Command-line arguments
       following these are taken to be names of files or directories to be examined,  up  to  the
       first  argument  that  begins with `-', or the argument `(' or `!'.  That argument and any
       following arguments are taken to be the expression describing what is to be searched  for.
       If  no  paths  are  given,  the current directory is used.  If no expression is given, the
       expression -print is used  (but  you  should  probably  consider  using  -print0  instead,
       anyway).

       This  manual page talks about `options' within the expression list.  These options control
       the behaviour of find but are specified immediately after the last path  name.   The  five
       `real' options -H, -L, -P, -D and -O must appear before the first path name, if at all.  A
       double dash -- could theoretically be used to signal that any remaining arguments are  not
       options,  but  this  does  not  really  work due to the way find determines the end of the
       following path arguments: it does that by  reading  until  an  expression  argument  comes
       (which also starts with a `-').  Now, if a path argument would start with a `-', then find
       would treat it as expression argument instead.  Thus, to ensure that all start points  are
       taken  as  such,  and especially to prevent that wildcard patterns expanded by the calling
       shell are not mistakenly treated as expression arguments, it is generally safer to  prefix
       wildcards  or  dubious  path names with either `./' or to use absolute path names starting
       with '/'.  Alternatively, it is generally safe though non-portable to use the  GNU  option
       -files0-from to pass arbitrary starting points to find.

       -P     Never follow symbolic links.  This is the default behaviour.  When find examines or
              prints information about files, and the file is a symbolic  link,  the  information
              used shall be taken from the properties of the symbolic link itself.

       -L     Follow  symbolic  links.  When find examines or prints information about files, the
              information used shall be taken from the properties of the file to which  the  link
              points,  not  from  the link itself (unless it is a broken symbolic link or find is
              unable to examine the file to which the link points).  Use of this  option  implies
              -noleaf.   If  you later use the -P option, -noleaf will still be in effect.  If -L
              is in effect and find discovers a  symbolic  link  to  a  subdirectory  during  its
              search, the subdirectory pointed to by the symbolic link will be searched.

              When  the -L option is in effect, the -type predicate will always match against the
              type of the file that a symbolic link points to rather than the link itself (unless
              the  symbolic  link  is  broken).   Actions that can cause symbolic links to become
              broken while find is executing (for example -delete) can  give  rise  to  confusing
              behaviour.   Using  -L  causes  the  -lname and -ilname predicates always to return
              false.

       -H     Do not follow symbolic links, except while processing the command  line  arguments.
              When find examines or prints information about files, the information used shall be
              taken from the properties of the symbolic link itself.  The only exception to  this
              behaviour  is when a file specified on the command line is a symbolic link, and the
              link can be resolved.  For that situation,  the  information  used  is  taken  from
              whatever the link points to (that is, the link is followed).  The information about
              the link itself is used as a fallback if the file pointed to by the  symbolic  link
              cannot  be  examined.   If  -H  is  in effect and one of the paths specified on the
              command line is a symbolic link to a directory, the contents of that directory will
              be examined (though of course -maxdepth 0 would prevent this).

       If  more  than  one of -H, -L and -P is specified, each overrides the others; the last one
       appearing on the command line takes effect.  Since it is the default, the -P option should
       be considered to be in effect unless either -H or -L is specified.

       GNU  find  frequently stats files during the processing of the command line itself, before
       any searching has begun.  These options also affect how  those  arguments  are  processed.
       Specifically,  there  are  a number of tests that compare files listed on the command line
       against a file we are currently considering.  In each case,  the  file  specified  on  the
       command  line will have been examined and some of its properties will have been saved.  If
       the named file is in fact a symbolic link, and the -P option is in effect (or  if  neither
       -H  nor -L were specified), the information used for the comparison will be taken from the
       properties of the symbolic link.  Otherwise, it will be taken from the properties  of  the
       file  the  link  points  to.   If  find cannot follow the link (for example because it has
       insufficient privileges or the link points to a nonexistent file) the  properties  of  the
       link itself will be used.

       When  the  -H  or  -L  options are in effect, any symbolic links listed as the argument of
       -newer will be dereferenced, and the timestamp will be taken from the file  to  which  the
       symbolic link points.  The same consideration applies to -newerXY, -anewer and -cnewer.

       The  -follow  option has a similar effect to -L, though it takes effect at the point where
       it appears (that is, if -L is not used but -follow is, any symbolic links appearing  after
       -follow on the command line will be dereferenced, and those before it will not).

       -D debugopts
              Print  diagnostic  information;  this  can be helpful to diagnose problems with why
              find is not doing what you want.   The  list  of  debug  options  should  be  comma
              separated.   Compatibility  of the debug options is not guaranteed between releases
              of findutils.  For a complete list of valid debug options, see the output  of  find
              -D help.  Valid debug options include

              exec   Show diagnostic information relating to -exec, -execdir, -ok and -okdir

              opt    Prints diagnostic information relating to the optimisation of the expression
                     tree; see the -O option.

              rates  Prints a summary indicating how often each predicate succeeded or failed.

              search Navigate the directory tree verbosely.

              stat   Print messages as files are examined with the stat and lstat  system  calls.
                     The find program tries to minimise such calls.

              tree   Show the expression tree in its original and optimised form.

              all    Enable all of the other debug options (but help).

              help   Explain the debugging options.

       -Olevel
              Enables  query optimisation.  The find program reorders tests to speed up execution
              while preserving the overall effect; that is, predicates with side effects are  not
              reordered relative to each other.  The optimisations performed at each optimisation
              level are as follows.

              0      Equivalent to optimisation level 1.

              1      This is the default optimisation level and corresponds  to  the  traditional
                     behaviour.   Expressions are reordered so that tests based only on the names
                     of files (for example -name and -regex) are performed first.

              2      Any -type or -xtype tests are performed after any tests based  only  on  the
                     names  of  files,  but  before  any  tests that require information from the
                     inode.  On many  modern  versions  of  Unix,  file  types  are  returned  by
                     readdir()  and  so  these  predicates are faster to evaluate than predicates
                     which need to stat the file first.  If you use the -fstype FOO predicate and
                     specify  a  filesystem  type  FOO  which  is  not known (that is, present in
                     `/etc/mtab') at the time  find  starts,  that  predicate  is  equivalent  to
                     -false.

              3      At  this optimisation level, the full cost-based query optimiser is enabled.
                     The order of tests is modified so that cheap (i.e. fast) tests are performed
                     first  and  more  expensive  ones are performed later, if necessary.  Within
                     each cost band, predicates are  evaluated  earlier  or  later  according  to
                     whether  they  are  likely  to succeed or not.  For -o, predicates which are
                     likely to succeed are evaluated earlier, and for -a,  predicates  which  are
                     likely to fail are evaluated earlier.

              The  cost-based  optimiser  has  a  fixed  idea  of how likely any given test is to
              succeed.  In some cases the probability takes account of the specific nature of the
              test  (for  example, -type f is assumed to be more likely to succeed than -type c).
              The cost-based optimiser is currently being evaluated.  If  it  does  not  actually
              improve   the   performance  of  find,  it  will  be  removed  again.   Conversely,
              optimisations that prove to be reliable, robust and effective  may  be  enabled  at
              lower  optimisation  levels  over  time.   However,  the  default  behaviour  (i.e.
              optimisation level 1) will not  be  changed  in  the  4.3.x  release  series.   The
              findutils  test  suite  runs  all  the tests on find at each optimisation level and
              ensures that the result is the same.

EXPRESSION

       The part of the command line after the list of starting points is the expression.  This is
       a  kind of query specification describing how we match files and what we do with the files
       that were matched.  An expression is composed of a sequence of things:

       Tests  Tests return a true or false value, usually on the basis of some property of a file
              we are considering.  The -empty test for example is true only when the current file
              is empty.

       Actions
              Actions have side effects (such as printing something on the standard  output)  and
              return  either  true or false, usually based on whether or not they are successful.
              The -print action for example prints the name of the current file on  the  standard
              output.

       Global options
              Global  options  affect the operation of tests and actions specified on any part of
              the command line.  Global options  always  return  true.   The  -depth  option  for
              example makes find traverse the file system in a depth-first order.

       Positional options
              Positional  options  affect  only  tests  or actions which follow them.  Positional
              options always return true.  The  -regextype  option  for  example  is  positional,
              specifying  the  regular expression dialect for regular expressions occurring later
              on the command line.

       Operators
              Operators join together the other items within the expression.   They  include  for
              example -o (meaning logical OR) and -a (meaning logical AND).  Where an operator is
              missing, -a is assumed.

       The -print action is performed on all files for which the whole expression is true, unless
       it  contains  an  action  other  than  -prune or -quit.  Actions which inhibit the default
       -print are -delete, -exec, -execdir, -ok, -okdir, -fls, -fprint, -fprintf, -ls, -print and
       -printf.

       The -delete action also acts like an option (since it implies -depth).

   POSITIONAL OPTIONS
       Positional  options  always  return  true.   They affect only tests occurring later on the
       command line.

       -daystart
              Measure times (for -amin, -atime,  -cmin,  -ctime,  -mmin,  and  -mtime)  from  the
              beginning  of  today rather than from 24 hours ago.  This option only affects tests
              which appear later on the command line.

       -follow
              Deprecated; use the  -L  option  instead.   Dereference  symbolic  links.   Implies
              -noleaf.   The -follow option affects only those tests which appear after it on the
              command line.  Unless the -H or -L option has been specified, the position  of  the
              -follow  option  changes the behaviour of the -newer predicate; any files listed as
              the argument of -newer will be dereferenced if they are symbolic links.   The  same
              consideration  applies  to  -newerXY,  -anewer  and  -cnewer.  Similarly, the -type
              predicate will always match against the type of  the  file  that  a  symbolic  link
              points to rather than the link itself.  Using -follow causes the -lname and -ilname
              predicates always to return false.

       -regextype type
              Changes the regular expression syntax understood by -regex and -iregex tests  which
              occur  later on the command line.  To see which regular expression types are known,
              use -regextype help.  The Texinfo documentation (see SEE ALSO) explains the meaning
              of and differences between the various types of regular expression.

       -warn, -nowarn
              Turn  warning  messages  on  or off.  These warnings apply only to the command line
              usage,  not  to  any  conditions  that  find  might  encounter  when  it   searches
              directories.   The  default  behaviour  corresponds to -warn if standard input is a
              tty, and to -nowarn otherwise.  If a warning message relating to command-line usage
              is  produced,  the  exit  status  of  find is not affected.  If the POSIXLY_CORRECT
              environment variable is set, and -warn is also used, it is not specified which,  if
              any, warnings will be active.

   GLOBAL OPTIONS
       Global  options always return true.  Global options take effect even for tests which occur
       earlier on the command line.  To prevent confusion, global options should specified on the
       command-line after the list of start points, just before the first test, positional option
       or action.  If you specify a global option in some other place, find will issue a  warning
       message explaining that this can be confusing.

       The  global  options occur after the list of start points, and so are not the same kind of
       option as -L, for example.

       -d     A synonym for -depth, for compatibility with FreeBSD, NetBSD, MacOS X and OpenBSD.

       -depth Process each directory's contents before the directory itself.  The -delete  action
              also implies -depth.

       -files0-from file
              Read the starting points from file instead of getting them on the command line.  In
              contrast to the known limitations of passing starting points via arguments  on  the
              command  line,  namely the limitation of the amount of file names, and the inherent
              ambiguity of file names clashing with option names, using  this  option  allows  to
              safely pass an arbitrary number of starting points to find.

              Using  this  option  and  passing  starting  points on the command line is mutually
              exclusive, and is therefore not allowed at the same time.

              The file argument is mandatory.  One can use -files0-from - to  read  the  list  of
              starting  points  from  the  standard  input stream, and e.g. from a pipe.  In this
              case, the actions -ok and -okdir are not  allowed,  because  they  would  obviously
              interfere with reading from standard input in order to get a user confirmation.

              The  starting  points  in  file  have to be separated by ASCII NUL characters.  Two
              consecutive NUL characters, i.e., a starting point with a Zero-length file name  is
              not  allowed  and will lead to an error diagnostic followed by a non-Zero exit code
              later.

              In the case the given file is empty, find does not process any starting  point  and
              therefore  will  exit  immediately  after  parsing  the program arguments.  This is
              unlike the standard invocation where find assumes the current directory as starting
              point if no path argument is passed.

              The  processing  of  the  starting  points  is  otherwise as usual, e.g.  find will
              recurse into subdirectories  unless  otherwise  prevented.   To  process  only  the
              starting points, one can additionally pass -maxdepth 0.

              Further  notes:  if  a  file  is  listed  more  than  once in the input file, it is
              unspecified whether it is visited more than once.  If the file  is  mutated  during
              the  operation  of  find,  the  result  is  unspecified as well.  Finally, the seek
              position within the named file at the time find exits, be it with -quit or  in  any
              other  way, is also unspecified.  By "unspecified" here is meant that it may or may
              not work or do any specific thing, and that the behavior may change  from  platform
              to platform, or from findutils release to release.

       -help, --help
              Print a summary of the command-line usage of find and exit.

       -ignore_readdir_race
              Normally,  find  will  emit  an error message when it fails to stat a file.  If you
              give this option and a file is deleted between the time find reads the name of  the
              file  from  the  directory and the time it tries to stat the file, no error message
              will be issued.  This also applies to files or directories whose names are given on
              the  command  line.  This option takes effect at the time the command line is read,
              which means that you cannot search one part of the filesystem with this  option  on
              and part of it with this option off (if you need to do that, you will need to issue
              two find commands instead, one with the option and one without it).

              Furthermore, find with the -ignore_readdir_race option will ignore  errors  of  the
              -delete  action in the case the file has disappeared since the parent directory was
              read: it will not output an error diagnostic, and the return code  of  the  -delete
              action will be true.

       -maxdepth levels
              Descend  at  most  levels  (a non-negative integer) levels of directories below the
              starting-points.  Using -maxdepth 0 means only apply the tests and actions  to  the
              starting-points themselves.

       -mindepth levels
              Do  not  apply  any  tests  or  actions  at levels less than levels (a non-negative
              integer).  Using -mindepth 1 means process all files except the starting-points.

       -mount Don't descend directories on other filesystems.  An alternate name for  -xdev,  for
              compatibility with some other versions of find.

       -noignore_readdir_race
              Turns off the effect of -ignore_readdir_race.

       -noleaf
              Do  not  optimize  by assuming that directories contain 2 fewer subdirectories than
              their hard link count.  This option is needed when searching  filesystems  that  do
              not follow the Unix directory-link convention, such as CD-ROM or MS-DOS filesystems
              or AFS volume mount points.  Each directory on a  normal  Unix  filesystem  has  at
              least  2  hard links: its name and its `.' entry.  Additionally, its subdirectories
              (if any) each have a `..' entry linked to that directory.  When find is examining a
              directory,  after  it  has statted 2 fewer subdirectories than the directory's link
              count, it knows that the rest of the entries in the directory  are  non-directories
              (`leaf'  files  in  the  directory  tree).   If  only  the  files' names need to be
              examined, there is no need to stat them;  this  gives  a  significant  increase  in
              search speed.

       -version, --version
              Print the find version number and exit.

       -xdev  Don't descend directories on other filesystems.

   TESTS
       Some  tests,  for  example  -newerXY  and  -samefile,  allow  comparison  between the file
       currently being examined and some reference file specified  on  the  command  line.   When
       these  tests  are  used,  the  interpretation  of  the reference file is determined by the
       options -H, -L and -P and any previous -follow, but the reference file  is  only  examined
       once,  at  the  time the command line is parsed.  If the reference file cannot be examined
       (for example, the stat(2) system call fails for it), an error message is issued, and  find
       exits with a nonzero status.

       A  numeric  argument n can be specified to tests (like -amin, -mtime, -gid, -inum, -links,
       -size, -uid and -used) as

       +n     for greater than n,

       -n     for less than n,

       n      for exactly n.

       Supported tests:

       -amin n
              File was last accessed less than, more than or exactly n minutes ago.

       -anewer reference
              Time of the last access of the current file is more recent than that  of  the  last
              data  modification  of the reference file.  If reference is a symbolic link and the
              -H option or the  -L  option  is  in  effect,  then  the  time  of  the  last  data
              modification of the file it points to is always used.

       -atime n
              File  was  last accessed less than, more than or exactly n*24 hours ago.  When find
              figures out how many 24-hour periods ago the file was last accessed, any fractional
              part  is  ignored, so to match -atime +1, a file has to have been accessed at least
              two days ago.

       -cmin n
              File's status was last changed less than, more than or exactly n minutes ago.

       -cnewer reference
              Time of the last status change of the current file is more recent than that of  the
              last  data modification of the reference file.  If reference is a symbolic link and
              the -H option or the -L option is in  effect,  then  the  time  of  the  last  data
              modification of the file it points to is always used.

       -ctime n
              File's status was last changed less than, more than or exactly n*24 hours ago.  See
              the comments for -atime to understand how rounding affects  the  interpretation  of
              file status change times.

       -empty File is empty and is either a regular file or a directory.

       -executable
              Matches  files which are executable and directories which are searchable (in a file
              name resolution sense) by the current user.  This takes into account access control
              lists  and  other  permissions  artefacts  which the -perm test ignores.  This test
              makes use of the access(2) system call, and so can be fooled by NFS  servers  which
              do  UID  mapping (or root-squashing), since many systems implement access(2) in the
              client's kernel and so cannot make use of the UID mapping information held  on  the
              server.   Because  this  test  is  based only on the result of the access(2) system
              call, there is no guarantee that a file for which this test succeeds  can  actually
              be executed.

       -false Always false.

       -fstype type
              File  is  on  a  filesystem  of  type  type.  The valid filesystem types vary among
              different versions of Unix;  an  incomplete  list  of  filesystem  types  that  are
              accepted on some version of Unix or another is: ufs, 4.2, 4.3, nfs, tmp, mfs, S51K,
              S52K.  You can use -printf  with  the  %F  directive  to  see  the  types  of  your
              filesystems.

       -gid n File's numeric group ID is less than, more than or exactly n.

       -group gname
              File belongs to group gname (numeric group ID allowed).

       -ilname pattern
              Like  -lname,  but  the match is case insensitive.  If the -L option or the -follow
              option is in effect, this test returns false unless the symbolic link is broken.

       -iname pattern
              Like -name, but the match is case insensitive.  For example, the patterns `fo*' and
              `F??'  match  the  file names `Foo', `FOO', `foo', `fOo', etc.  The pattern `*foo*`
              will also match a file called '.foobar'.

       -inum n
              File has inode number smaller than, greater than or  exactly  n.   It  is  normally
              easier to use the -samefile test instead.

       -ipath pattern
              Like -path.  but the match is case insensitive.

       -iregex pattern
              Like -regex, but the match is case insensitive.

       -iwholename pattern
              See -ipath.  This alternative is less portable than -ipath.

       -links n
              File has less than, more than or exactly n hard links.

       -lname pattern
              File  is  a  symbolic  link  whose  contents  match  shell  pattern  pattern.   The
              metacharacters do not treat `/' or `.' specially.  If the -L option or the  -follow
              option is in effect, this test returns false unless the symbolic link is broken.

       -mmin n
              File's data was last modified less than, more than or exactly n minutes ago.

       -mtime n
              File's  data was last modified less than, more than or exactly n*24 hours ago.  See
              the comments for -atime to understand how rounding affects  the  interpretation  of
              file modification times.

       -name pattern
              Base  of  file  name  (the path with the leading directories removed) matches shell
              pattern pattern.  Because the leading  directories  are  removed,  the  file  names
              considered  for  a match with -name will never include a slash, so `-name a/b' will
              never match anything (you probably need to use -path instead).  A warning is issued
              if you try to do this, unless the environment variable POSIXLY_CORRECT is set.  The
              metacharacters (`*', `?', and `[]') match a `.' at the start of the base name (this
              is  a  change  in  findutils-4.2.2;  see  section STANDARDS CONFORMANCE below).  To
              ignore a directory and the files under it, use -prune rather  than  checking  every
              file in the tree; see an example in the description of that action.  Braces are not
              recognised as being special, despite the fact that some shells including Bash imbue
              braces  with  a  special  meaning  in  shell  patterns.   The  filename matching is
              performed with the use of the fnmatch(3) library function.  Don't forget to enclose
              the pattern in quotes in order to protect it from expansion by the shell.

       -newer reference
              Time  of the last data modification of the current file is more recent than that of
              the last data modification of the reference file.  If reference is a symbolic  link
              and  the  -H  option  or the -L option is in effect, then the time of the last data
              modification of the file it points to is always used.

       -newerXY reference
              Succeeds if timestamp X of the file being considered is newer than timestamp  Y  of
              the file reference.  The letters X and Y can be any of the following letters:

              a   The access time of the file reference
              B   The birth time of the file reference
              c   The inode status change time of reference
              m   The modification time of the file reference
              t   reference is interpreted directly as a time

              Some  combinations  are  invalid;  for  example, it is invalid for X to be t.  Some
              combinations are not implemented on all systems; for example B is not supported  on
              all  systems.  If an invalid or unsupported combination of XY is specified, a fatal
              error results.  Time specifications are interpreted as for the argument to  the  -d
              option  of GNU date.  If you try to use the birth time of a reference file, and the
              birth time cannot be determined, a fatal error message results.  If you  specify  a
              test  which  refers  to the birth time of files being examined, this test will fail
              for any files where the birth time is unknown.

       -nogroup
              No group corresponds to file's numeric group ID.

       -nouser
              No user corresponds to file's numeric user ID.

       -path pattern
              File name matches shell pattern pattern.  The metacharacters do not  treat  `/'  or
              `.' specially; so, for example,
                  find . -path "./sr*sc"
              will print an entry for a directory called ./src/misc (if one exists).  To ignore a
              whole directory tree, use -prune rather than checking every file in the tree.  Note
              that  the  pattern  match test applies to the whole file name, starting from one of
              the start points named on the command line.  It would only make  sense  to  use  an
              absolute path name here if the relevant start point is also an absolute path.  This
              means that this command will never match anything:
                  find bar -path /foo/bar/myfile -print
              Find compares the -path argument with the concatenation of a directory name and the
              base  name of the file it's examining.  Since the concatenation will never end with
              a slash, -path arguments ending in a slash will match  nothing  (except  perhaps  a
              start  point specified on the command line).  The predicate -path is also supported
              by HP-UX find and is part of the POSIX 2008 standard.

       -perm mode
              File's permission bits are exactly mode (octal or symbolic).  Since an exact  match
              is  required,  if  you  want  to  use this form for symbolic modes, you may have to
              specify a rather complex mode string.  For example  `-perm  g=w'  will  only  match
              files  which  have mode 0020 (that is, ones for which group write permission is the
              only permission set).  It is more likely that you will want to use the `/'  or  `-'
              forms,  for  example  `-perm  -g=w',  which  matches  any  file  with  group  write
              permission.  See the EXAMPLES section for some illustrative examples.

       -perm -mode
              All of the permission bits mode are set for the file.  Symbolic modes are  accepted
              in this form, and this is usually the way in which you would want to use them.  You
              must specify `u', `g' or `o' if you use a symbolic mode.  See the EXAMPLES  section
              for some illustrative examples.

       -perm /mode
              Any  of the permission bits mode are set for the file.  Symbolic modes are accepted
              in this form.  You must specify `u', `g' or `o' if you use a  symbolic  mode.   See
              the EXAMPLES section for some illustrative examples.  If no permission bits in mode
              are set, this test matches any file (the idea here is to  be  consistent  with  the
              behaviour of -perm -000).

       -perm +mode
              This  is no longer supported (and has been deprecated since 2005).  Use -perm /mode
              instead.

       -readable
              Matches files which are readable by the current  user.   This  takes  into  account
              access  control lists and other permissions artefacts which the -perm test ignores.
              This test makes use of the access(2) system call, and  so  can  be  fooled  by  NFS
              servers  which  do  UID  mapping  (or root-squashing), since many systems implement
              access(2) in the client's kernel  and  so  cannot  make  use  of  the  UID  mapping
              information held on the server.

       -regex pattern
              File  name  matches regular expression pattern.  This is a match on the whole path,
              not a search.  For example, to match a file named ./fubar3, you can use the regular
              expression  `.*bar.'  or  `.*b.*3',  but  not  `f.*r3'.   The  regular  expressions
              understood by find are by  default  Emacs  Regular  Expressions  (except  that  `.'
              matches newline), but this can be changed with the -regextype option.

       -samefile name
              File  refers  to  the  same  inode as name.  When -L is in effect, this can include
              symbolic links.

       -size n[cwbkMG]
              File uses less than, more than or exactly n  units  of  space,  rounding  up.   The
              following suffixes can be used:

              `b'    for 512-byte blocks (this is the default if no suffix is used)

              `c'    for bytes

              `w'    for two-byte words

              `k'    for kibibytes (KiB, units of 1024 bytes)

              `M'    for mebibytes (MiB, units of 1024 * 1024 = 1048576 bytes)

              `G'    for gibibytes (GiB, units of 1024 * 1024 * 1024 = 1073741824 bytes)

              The size is simply the st_size member of the struct stat populated by the lstat (or
              stat) system call, rounded up as shown above.  In other words, it's consistent with
              the  result  you  get  for  ls -l.   Bear  in  mind  that  the `%k' and `%b' format
              specifiers of -printf handle sparse  files  differently.   The  `b'  suffix  always
              denotes  512-byte  blocks  and  never  1024-byte  blocks, which is different to the
              behaviour of -ls.

              The + and - prefixes signify greater than and less than, as usual; i.e.,  an  exact
              size  of  n  units does not match.  Bear in mind that the size is rounded up to the
              next unit.  Therefore -size -1M is not equivalent to -size -1048576c.   The  former
              only matches empty files, the latter matches files from 0 to 1,048,575 bytes.

       -true  Always true.

       -type c
              File is of type c:

              b      block (buffered) special

              c      character (unbuffered) special

              d      directory

              p      named pipe (FIFO)

              f      regular file

              l      symbolic  link; this is never true if the -L option or the -follow option is
                     in effect, unless the symbolic link is broken.  If you want  to  search  for
                     symbolic links when -L is in effect, use -xtype.

              s      socket

              D      door (Solaris)

              To  search for more than one type at once, you can supply the combined list of type
              letters separated by a comma `,' (GNU extension).

       -uid n File's numeric user ID is less than, more than or exactly n.

       -used n
              File was last accessed less than, more than or exactly n days after its status  was
              last changed.

       -user uname
              File is owned by user uname (numeric user ID allowed).

       -wholename pattern
              See -path.  This alternative is less portable than -path.

       -writable
              Matches  files  which  are  writable  by the current user.  This takes into account
              access control lists and other permissions artefacts which the -perm test  ignores.
              This  test  makes  use  of  the  access(2) system call, and so can be fooled by NFS
              servers which do UID mapping (or  root-squashing),  since  many  systems  implement
              access(2)  in  the  client's  kernel  and  so  cannot  make  use of the UID mapping
              information held on the server.

       -xtype c
              The same as -type unless the file is a symbolic link.  For symbolic links:  if  the
              -H  or  -P option was specified, true if the file is a link to a file of type c; if
              the -L option has been given, true if c is  `l'.   In  other  words,  for  symbolic
              links, -xtype checks the type of the file that -type does not check.

       -context pattern
              (SELinux only) Security context of the file matches glob pattern.

   ACTIONS
       -delete
              Delete  files or directories; true if removal succeeded.  If the removal failed, an
              error message is issued and find's exit status will be nonzero (when it  eventually
              exits).

              Warning:  Don't  forget  that  find evaluates the command line as an expression, so
              putting -delete first will make find try to delete everything  below  the  starting
              points you specified.

              The use of the -delete action on the command line automatically turns on the -depth
              option.  As in turn -depth makes -prune  ineffective,  the  -delete  action  cannot
              usefully be combined with -prune.

              Often,  the user might want to test a find command line with -print prior to adding
              -delete for the actual removal run.  To avoid surprising  results,  it  is  usually
              best to remember to use -depth explicitly during those earlier test runs.

              The -delete action will fail to remove a directory unless it is empty.

              Together  with  the  -ignore_readdir_race  option,  find  will ignore errors of the
              -delete action in the case the file has disappeared since the parent directory  was
              read:  it will not output an error diagnostic, not change the exit code to nonzero,
              and the return code of the -delete action will be true.

       -exec command ;
              Execute command; true if 0 status is returned.  All following arguments to find are
              taken  to  be  arguments  to  the  command  until  an argument consisting of `;' is
              encountered.  The string `{}' is replaced by the current file name being  processed
              everywhere  it  occurs in the arguments to the command, not just in arguments where
              it is alone, as in some versions of find.  Both of these constructions  might  need
              to  be  escaped (with a `\') or quoted to protect them from expansion by the shell.
              See the EXAMPLES section for  examples  of  the  use  of  the  -exec  option.   The
              specified  command  is  run once for each matched file.  The command is executed in
              the starting directory.  There are unavoidable security problems surrounding use of
              the -exec action; you should use the -execdir option instead.

       -exec command {} +
              This  variant of the -exec action runs the specified command on the selected files,
              but the command line is built by appending each selected file name at the end;  the
              total  number  of  invocations  of the command will be much less than the number of
              matched files.  The command line is built in much the same way  that  xargs  builds
              its command lines.  Only one instance of `{}' is allowed within the command, and it
              must appear at the end, immediately before the `+'; it needs to be escaped (with  a
              `\')  or  quoted  to  protect  it from interpretation by the shell.  The command is
              executed in the starting directory.  If any invocation with the `+' form returns  a
              non-zero  value  as exit status, then find returns a non-zero exit status.  If find
              encounters an error, this can sometimes cause an immediate exit,  so  some  pending
              commands  may  not  be run at all.  For this reason -exec my-command ... {} + -quit
              may not result in my-command actually being run.   This  variant  of  -exec  always
              returns true.

       -execdir command ;

       -execdir command {} +
              Like  -exec,  but the specified command is run from the subdirectory containing the
              matched file, which is not normally the directory in which you  started  find.   As
              with  -exec, the {} should be quoted if find is being invoked from a shell.  This a
              much more secure method for invoking commands, as it avoids race conditions  during
              resolution  of  the  paths to the matched files.  As with the -exec action, the `+'
              form of -execdir will build a command line to process more than one  matched  file,
              but  any  given  invocation  of command will only list files that exist in the same
              subdirectory.  If you use this option, you must ensure that your  PATH  environment
              variable  does  not reference `.'; otherwise, an attacker can run any commands they
              like by leaving an appropriately-named file in a directory in which  you  will  run
              -execdir.   The same applies to having entries in PATH which are empty or which are
              not absolute directory names.  If any invocation with the `+' form returns  a  non-
              zero  value  as  exit  status,  then  find returns a non-zero exit status.  If find
              encounters an error, this can sometimes cause an immediate exit,  so  some  pending
              commands  may not be run at all.  The result of the action depends on whether the +
              or the ; variant is being used; -execdir command {} + always  returns  true,  while
              -execdir command {} ; returns true only if command returns 0.

       -fls file
              True;  like -ls but write to file like -fprint.  The output file is always created,
              even if the predicate is never matched.  See  the  UNUSUAL  FILENAMES  section  for
              information about how unusual characters in filenames are handled.

       -fprint file
              True; print the full file name into file file.  If file does not exist when find is
              run, it is created; if it does exist, it is truncated.  The file names  /dev/stdout
              and  /dev/stderr  are  handled  specially;  they  refer  to the standard output and
              standard error output, respectively.  The output file is always  created,  even  if
              the  predicate is never matched.  See the UNUSUAL FILENAMES section for information
              about how unusual characters in filenames are handled.

       -fprint0 file
              True; like -print0 but write to file like  -fprint.   The  output  file  is  always
              created, even if the predicate is never matched.  See the UNUSUAL FILENAMES section
              for information about how unusual characters in filenames are handled.

       -fprintf file format
              True; like -printf but write to file like  -fprint.   The  output  file  is  always
              created, even if the predicate is never matched.  See the UNUSUAL FILENAMES section
              for information about how unusual characters in filenames are handled.

       -ls    True; list current file in ls -dils format on standard output.   The  block  counts
              are  of  1 KB  blocks,  unless  the environment variable POSIXLY_CORRECT is set, in
              which case 512-byte blocks  are  used.   See  the  UNUSUAL  FILENAMES  section  for
              information about how unusual characters in filenames are handled.

       -ok command ;
              Like -exec but ask the user first.  If the user agrees, run the command.  Otherwise
              just return false.  If the command is run, its standard input  is  redirected  from
              /dev/null.  This action may not be specified together with the -files0-from option.

              The  response  to  the  prompt  is matched against a pair of regular expressions to
              determine if it is an affirmative or negative response.  This regular expression is
              obtained  from  the  system  if the POSIXLY_CORRECT environment variable is set, or
              otherwise from  find's  message  translations.   If  the  system  has  no  suitable
              definition, find's own definition will be used.  In either case, the interpretation
              of the regular expression itself will be  affected  by  the  environment  variables
              LC_CTYPE  (character  classes)  and  LC_COLLATE  (character  ranges and equivalence
              classes).

       -okdir command ;
              Like -execdir but ask the user first in the same way as for -ok.  If the user  does
              not  agree,  just  return  false.   If  the  command  is run, its standard input is
              redirected from /dev/null.  This action may not  be  specified  together  with  the
              -files0-from option.

       -print True;  print  the full file name on the standard output, followed by a newline.  If
              you are piping the output of find into another program and there  is  the  faintest
              possibility  that  the  files  which you are searching for might contain a newline,
              then you should seriously consider using the -print0 option instead of -print.  See
              the  UNUSUAL  FILENAMES  section  for  information  about how unusual characters in
              filenames are handled.

       -print0
              True; print the full file name on the standard output, followed by a null character
              (instead  of  the newline character that -print uses).  This allows file names that
              contain newlines or other types of white  space  to  be  correctly  interpreted  by
              programs that process the find output.  This option corresponds to the -0 option of
              xargs.

       -printf format
              True; print format on  the  standard  output,  interpreting  `\'  escapes  and  `%'
              directives.   Field  widths and precisions can be specified as with the printf(3) C
              function.  Please note that many of the fields are printed as %s  rather  than  %d,
              and  this may mean that flags don't work as you might expect.  This also means that
              the `-' flag does work (it forces  fields  to  be  left-aligned).   Unlike  -print,
              -printf  does  not  add  a  newline  at  the  end  of  the string.  The escapes and
              directives are:

              \a     Alarm bell.

              \b     Backspace.

              \c     Stop printing from this format immediately and flush the output.

              \f     Form feed.

              \n     Newline.

              \r     Carriage return.

              \t     Horizontal tab.

              \v     Vertical tab.

              \0     ASCII NUL.

              \\     A literal backslash (`\').

              \NNN   The character whose ASCII code is NNN (octal).

              A `\' character  followed  by  any  other  character  is  treated  as  an  ordinary
              character, so they both are printed.

              %%     A literal percent sign.

              %a     File's last access time in the format returned by the C ctime(3) function.

              %Ak    File's last access time in the format specified by k, which is either `@' or
                     a directive  for  the  C  strftime(3)  function.   The  following  shows  an
                     incomplete list of possible values for k.  Please refer to the documentation
                     of strftime(3) for the full list.   Some  of  the  conversion  specification
                     characters  might not be available on all systems, due to differences in the
                     implementation of the strftime(3) library function.

                     @      seconds since Jan. 1, 1970, 00:00 GMT, with fractional part.

                     Time fields:

                     H      hour (00..23)

                     I      hour (01..12)

                     k      hour ( 0..23)

                     l      hour ( 1..12)

                     M      minute (00..59)

                     p      locale's AM or PM

                     r      time, 12-hour (hh:mm:ss [AP]M)

                     S      Second (00.00 .. 61.00).  There is a fractional part.

                     T      time, 24-hour (hh:mm:ss.xxxxxxxxxx)

                     +      Date and time, separated by `+', for example `2004-04-28+22:22:05.0'.
                            This  is  a GNU extension.  The time is given in the current timezone
                            (which may be affected by setting the TZ environment variable).   The
                            seconds field includes a fractional part.

                     X      locale's  time  representation (H:M:S).  The seconds field includes a
                            fractional part.

                     Z      time zone (e.g., EDT), or nothing if no time zone is determinable

                     Date fields:

                     a      locale's abbreviated weekday name (Sun..Sat)

                     A      locale's full weekday name, variable length (Sunday..Saturday)

                     b      locale's abbreviated month name (Jan..Dec)

                     B      locale's full month name, variable length (January..December)

                     c      locale's date and time (Sat Nov 04 12:02:33 EST 1989).  The format is
                            the  same  as for ctime(3) and so to preserve compatibility with that
                            format, there is no fractional part in the seconds field.

                     d      day of month (01..31)

                     D      date (mm/dd/yy)

                     F      date (yyyy-mm-dd)

                     h      same as b

                     j      day of year (001..366)

                     m      month (01..12)

                     U      week number of year with Sunday as first day of week (00..53)

                     w      day of week (0..6)

                     W      week number of year with Monday as first day of week (00..53)

                     x      locale's date representation (mm/dd/yy)

                     y      last two digits of year (00..99)

                     Y      year (1970...)

              %b     The amount of disk space used for this file in 512-byte blocks.  Since  disk
                     space is allocated in multiples of the filesystem block size this is usually
                     greater than %s/512, but it can also be smaller if  the  file  is  a  sparse
                     file.

              %Bk    File's  birth  time,  i.e., its creation time, in the format specified by k,
                     which is the same as for %A.  This directive produces an empty string if the
                     underlying operating system or filesystem does not support birth times.

              %c     File's  last  status  change  time  in the format returned by the C ctime(3)
                     function.

              %Ck    File's last status change time in the format specified by k,  which  is  the
                     same as for %A.

              %d     File's depth in the directory tree; 0 means the file is a starting-point.

              %D     The  device  number  on  which  the  file exists (the st_dev field of struct
                     stat), in decimal.

              %f     Print the basename; the file's name with  any  leading  directories  removed
                     (only  the  last  element).   For  /,  the  result is `/'.  See the EXAMPLES
                     section for an example.

              %F     Type of the filesystem the file is on; this value can be used for -fstype.

              %g     File's group name, or numeric group ID if the group has no name.

              %G     File's numeric group ID.

              %h     Dirname; the Leading directories of  the  file's  name  (all  but  the  last
                     element).   If the file name contains no slashes (since it is in the current
                     directory) the %h specifier expands to `.'.  For files which are  themselves
                     directories  and  contain  a  slash  (including  /), %h expands to the empty
                     string.  See the EXAMPLES section for an example.

              %H     Starting-point under which file was found.

              %i     File's inode number (in decimal).

              %k     The amount of disk space used for this file  in  1 KB  blocks.   Since  disk
                     space is allocated in multiples of the filesystem block size this is usually
                     greater than %s/1024, but it can also be smaller if the  file  is  a  sparse
                     file.

              %l     Object of symbolic link (empty string if file is not a symbolic link).

              %m     File's  permission  bits  (in  octal).   This  option uses the `traditional'
                     numbers  which  most  Unix  implementations  use,  but  if  your  particular
                     implementation  uses an unusual ordering of octal permissions bits, you will
                     see a difference between the actual value of the file's mode and the  output
                     of %m.  Normally you will want to have a leading zero on this number, and to
                     do this, you should use the # flag (as in, for example, `%#m').

              %M     File's permissions (in  symbolic  form,  as  for  ls).   This  directive  is
                     supported in findutils 4.2.5 and later.

              %n     Number of hard links to file.

              %p     File's name.

              %P     File's  name  with  the  name of the starting-point under which it was found
                     removed.

              %s     File's size in bytes.

              %S     File's sparseness.  This is calculated as (BLOCKSIZE*st_blocks  /  st_size).
                     The  exact  value  you  will get for an ordinary file of a certain length is
                     system-dependent.  However, normally sparse files will have values less than
                     1.0,  and  files which use indirect blocks may have a value which is greater
                     than 1.0.  In general the number of blocks used by a  file  is  file  system
                     dependent.  The value used for BLOCKSIZE is system-dependent, but is usually
                     512 bytes.  If the file size is zero, the value printed  is  undefined.   On
                     systems  which lack support for st_blocks, a file's sparseness is assumed to
                     be 1.0.

              %t     File's last modification time in the  format  returned  by  the  C  ctime(3)
                     function.

              %Tk    File's  last  modification  time  in the format specified by k, which is the
                     same as for %A.

              %u     File's user name, or numeric user ID if the user has no name.

              %U     File's numeric user ID.

              %y     File's type (like in ls -l), U=unknown type (shouldn't happen)

              %Y     File's   type   (like   %y),   plus   follow   symbolic   links:   `L'=loop,
                     `N'=nonexistent,  `?'  for  any other error when determining the type of the
                     target of a symbolic link.

              %Z     (SELinux only) file's security context.

              %{ %[ %(
                     Reserved for future use.

              A `%' character followed by  any  other  character  is  discarded,  but  the  other
              character  is  printed  (don't  rely  on  this, as further format characters may be
              introduced).  A `%' at the end of the format argument  causes  undefined  behaviour
              since  there  is  no  following  character.  In some locales, it may hide your door
              keys, while in others it may remove the final page from the novel you are reading.

              The %m and %d directives support the #, 0 and + flags, but the other directives  do
              not,  even  if  they  print  numbers.  Numeric directives that do not support these
              flags include G, U, b, D, k and n.  The `-' format flag is  supported  and  changes
              the  alignment  of  a  field  from  right-justified (which is the default) to left-
              justified.

              See the UNUSUAL FILENAMES section for information about how unusual  characters  in
              filenames are handled.

       -prune True; if the file is a directory, do not descend into it.  If -depth is given, then
              -prune has no effect.  Because -delete implies  -depth,  you  cannot  usefully  use
              -prune  and -delete together.  For example, to skip the directory src/emacs and all
              files and directories under it, and print the names of the other  files  found,  do
              something like this:
                  find . -path ./src/emacs -prune -o -print

       -quit  Exit  immediately  (with  return  value  zero if no errors have occurred).  This is
              different to  -prune  because  -prune  only  applies  to  the  contents  of  pruned
              directories,  while  -quit  simply makes find stop immediately.  No child processes
              will be left running.  Any command lines which have been built  by  -exec ... +  or
              -execdir ... +  are invoked before the program is exited.  After -quit is executed,
              no more files specified on the  command  line  will  be  processed.   For  example,
              `find /tmp/foo /tmp/bar -print -quit` will print only `/tmp/foo`.
              One  common  use  of  -quit is to stop searching the file system once we have found
              what we want.  For example, if we want to find just a single file we can do this:
                  find / -name needle -print -quit

   OPERATORS
       Listed in order of decreasing precedence:

       ( expr )
              Force precedence.  Since parentheses are special to the shell,  you  will  normally
              need  to  quote them.  Many of the examples in this manual page use backslashes for
              this purpose: `\(...\)' instead of `(...)'.

       ! expr True if expr is false.  This character  will  also  usually  need  protection  from
              interpretation by the shell.

       -not expr
              Same as ! expr, but not POSIX compliant.

       expr1 expr2
              Two  expressions  in  a row are taken to be joined with an implied -a; expr2 is not
              evaluated if expr1 is false.

       expr1 -a expr2
              Same as expr1 expr2.

       expr1 -and expr2
              Same as expr1 expr2, but not POSIX compliant.

       expr1 -o expr2
              Or; expr2 is not evaluated if expr1 is true.

       expr1 -or expr2
              Same as expr1 -o expr2, but not POSIX compliant.

       expr1 , expr2
              List; both expr1 and expr2 are always evaluated.  The value of expr1 is  discarded;
              the  value of the list is the value of expr2.  The comma operator can be useful for
              searching for several different types  of  thing,  but  traversing  the  filesystem
              hierarchy  only  once.  The -fprintf action can be used to list the various matched
              items into several different output files.

       Please note that -a when specified implicitly (for example by two tests appearing  without
       an  explicit  operator  between  them)  or explicitly has higher precedence than -o.  This
       means that find . -name afile -o -name bfile -print will never print afile.

UNUSUAL FILENAMES

       Many of the actions of find result in the printing of data which is under the  control  of
       other  users.   This  includes  file  names, sizes, modification times and so forth.  File
       names are a potential problem since they can contain any character except  `\0'  and  `/'.
       Unusual  characters  in  file names can do unexpected and often undesirable things to your
       terminal (for example, changing the settings of your function  keys  on  some  terminals).
       Unusual characters are handled differently by various actions, as described below.

       -print0, -fprint0
              Always  print  the  exact  filename,  unchanged,  even  if the output is going to a
              terminal.

       -ls, -fls
              Unusual characters are always escaped.  White space, backslash,  and  double  quote
              characters  are  printed  using  C-style  escaping (for example `\f', `\"').  Other
              unusual characters are printed using an octal escape.  Other  printable  characters
              (for  -ls and -fls these are the characters between octal 041 and 0176) are printed
              as-is.

       -printf, -fprintf
              If the output is not going to a terminal, it  is  printed  as-is.   Otherwise,  the
              result  depends  on  which directive is in use.  The directives %D, %F, %g, %G, %H,
              %Y, and %y expand to values which are not under control of files'  owners,  and  so
              are  printed  as-is.  The directives %a, %b, %c, %d, %i, %k, %m, %M, %n, %s, %t, %u
              and %U have values which are under the control of files' owners but which cannot be
              used  to  send arbitrary data to the terminal, and so these are printed as-is.  The
              directives %f, %h, %l, %p and %P are quoted.  This quoting is performed in the same
              way  as for GNU ls.  This is not the same quoting mechanism as the one used for -ls
              and -fls.  If you are able to decide what format to use for the output of find then
              it  is  normally  better  to  use `\0' as a terminator than to use newline, as file
              names can contain white space and newline characters.  The setting of the  LC_CTYPE
              environment variable is used to determine which characters need to be quoted.

       -print, -fprint
              Quoting  is  handled in the same way as for -printf and -fprintf.  If you are using
              find in a script or in a situation where the matched  files  might  have  arbitrary
              names, you should consider using -print0 instead of -print.

       The  -ok and -okdir actions print the current filename as-is.  This may change in a future
       release.

STANDARDS CONFORMANCE

       For closest  compliance  to  the  POSIX  standard,  you  should  set  the  POSIXLY_CORRECT
       environment variable.  The following options are specified in the POSIX standard (IEEE Std
       1003.1-2008, 2016 Edition):

       -H     This option is supported.

       -L     This option is supported.

       -name  This option is supported, but POSIX conformance depends on the POSIX conformance of
              the   system's   fnmatch(3)   library   function.   As  of  findutils-4.2.2,  shell
              metacharacters (`*', `?' or `[]' for example) match a  leading  `.',  because  IEEE
              PASC  interpretation 126 requires this.  This is a change from previous versions of
              findutils.

       -type  Supported.  POSIX specifies `b', `c', `d', `l', `p', `f' and `s'.   GNU  find  also
              supports  `D',  representing a Door, where the OS provides these.  Furthermore, GNU
              find allows multiple types to be specified at once in a comma-separated list.

       -ok    Supported.  Interpretation of the response is  according  to  the  `yes'  and  `no'
              patterns  selected  by  setting  the  LC_MESSAGES  environment  variable.  When the
              POSIXLY_CORRECT environment variable is set,  these  patterns  are  taken  system's
              definition  of  a  positive  (yes)  or  negative  (no)  response.  See the system's
              documentation  for  nl_langinfo(3),  in  particular  YESEXPR  and   NOEXPR.    When
              POSIXLY_CORRECT  is not set, the patterns are instead taken from find's own message
              catalogue.

       -newer Supported.  If the file specified is a symbolic link, it  is  always  dereferenced.
              This is a change from previous behaviour, which used to take the relevant time from
              the symbolic link; see the HISTORY section below.

       -perm  Supported.  If the POSIXLY_CORRECT environment  variable  is  not  set,  some  mode
              arguments  (for  example  +a+x)  which  are  not  valid  in POSIX are supported for
              backward-compatibility.

       Other primaries
              The primaries -atime, -ctime, -depth,  -exec,  -group,  -links,  -mtime,  -nogroup,
              -nouser, -ok, -path, -print, -prune, -size, -user and -xdev are all supported.

       The  POSIX  standard  specifies  parentheses `(', `)', negation `!' and the logical AND/OR
       operators -a and -o.

       All other options, predicates, expressions and so forth are extensions  beyond  the  POSIX
       standard.  Many of these extensions are not unique to GNU find, however.

       The POSIX standard requires that find detects loops:

              The  find  utility  shall  detect  infinite  loops;  that is, entering a previously
              visited directory that is an ancestor  of  the  last  file  encountered.   When  it
              detects  an  infinite loop, find shall write a diagnostic message to standard error
              and shall either recover its position in the hierarchy or terminate.

       GNU find complies with these requirements.  The link count of  directories  which  contain
       entries which are hard links to an ancestor will often be lower than they otherwise should
       be.  This can mean  that  GNU  find  will  sometimes  optimise  away  the  visiting  of  a
       subdirectory  which is actually a link to an ancestor.  Since find does not actually enter
       such a subdirectory, it is allowed to avoid emitting a diagnostic message.  Although  this
       behaviour  may be somewhat confusing, it is unlikely that anybody actually depends on this
       behaviour.  If the leaf optimisation has been turned off with -noleaf, the directory entry
       will always be examined and the diagnostic message will be issued where it is appropriate.
       Symbolic links cannot be used to create filesystem cycles as such, but if the -L option or
       the  -follow  option is in use, a diagnostic message is issued when find encounters a loop
       of symbolic links.  As with loops containing hard links, the leaf optimisation will  often
       mean  that find knows that it doesn't need to call stat() or chdir() on the symbolic link,
       so this diagnostic is frequently not necessary.

       The -d option is supported for compatibility with various BSD systems, but you should  use
       the POSIX-compliant option -depth instead.

       The  POSIXLY_CORRECT  environment  variable does not affect the behaviour of the -regex or
       -iregex tests because those tests aren't specified in the POSIX standard.

ENVIRONMENT VARIABLES

       LANG   Provides a default value for the internationalization variables that are  unset  or
              null.

       LC_ALL If  set  to  a  non-empty  string  value,  override  the  values  of  all the other
              internationalization variables.

       LC_COLLATE
              The POSIX standard specifies that this variable affects the pattern matching to  be
              used  for  the -name option.  GNU find uses the fnmatch(3) library function, and so
              support for LC_COLLATE depends on the system library.  This variable  also  affects
              the  interpretation  of the response to -ok; while the LC_MESSAGES variable selects
              the actual pattern used to interpret the response to -ok, the interpretation of any
              bracket expressions in the pattern will be affected by LC_COLLATE.

       LC_CTYPE
              This   variable  affects  the  treatment  of  character  classes  used  in  regular
              expressions and also with the  -name  test,  if  the  system's  fnmatch(3)  library
              function  supports  this.   This  variable  also  affects the interpretation of any
              character classes in the regular expressions used to interpret the response to  the
              prompt  issued  by  -ok.   The LC_CTYPE environment variable will also affect which
              characters are considered to be unprintable when filenames  are  printed;  see  the
              section UNUSUAL FILENAMES.

       LC_MESSAGES
              Determines   the  locale  to  be  used  for  internationalised  messages.   If  the
              POSIXLY_CORRECT  environment  variable   is   set,   this   also   determines   the
              interpretation of the response to the prompt made by the -ok action.

       NLSPATH
              Determines the location of the internationalisation message catalogues.

       PATH   Affects  the  directories  which  are  searched  to find the executables invoked by
              -exec, -execdir, -ok and -okdir.

       POSIXLY_CORRECT
              Determines the block size used by -ls and -fls.  If POSIXLY_CORRECT is set,  blocks
              are units of 512 bytes.  Otherwise they are units of 1024 bytes.

              Setting this variable also turns off warning messages (that is, implies -nowarn) by
              default, because POSIX requires that apart from the output for  -ok,  all  messages
              printed on stderr are diagnostics and must result in a non-zero exit status.

              When POSIXLY_CORRECT is not set, -perm +zzz is treated just like -perm /zzz if +zzz
              is not a valid symbolic mode.  When POSIXLY_CORRECT is  set,  such  constructs  are
              treated as an error.

              When  POSIXLY_CORRECT  is set, the response to the prompt made by the -ok action is
              interpreted according to the system's message catalogue, as opposed to according to
              find's own message translations.

       TZ     Affects  the  time  zone  used  for  some  of the time-related format directives of
              -printf and -fprintf.

EXAMPLES

   Simple `find|xargs` approach
       •      Find files named core in or below the directory /tmp and delete them.

                  $ find /tmp -name core -type f -print | xargs /bin/rm -f

              Note that this  will  work  incorrectly  if  there  are  any  filenames  containing
              newlines, single or double quotes, or spaces.

   Safer `find -print0 | xargs -0` approach
       •      Find  files  named  core in or below the directory /tmp and delete them, processing
              filenames in such a way that file or directory names containing  single  or  double
              quotes, spaces or newlines are correctly handled.

                  $ find /tmp -name core -type f -print0 | xargs -0 /bin/rm -f

              The -name test comes before the -type test in order to avoid having to call stat(2)
              on every file.

       Note that there is still a race between the time find traverses the hierarchy printing the
       matching filenames, and the time the process executed by xargs works with that file.

   Processing arbitrary starting points
       •      Given that another program proggy pre-filters and creates a huge NUL-separated list
              of files, process those as starting points, and find all regular, empty files among
              them:

                  $ proggy | find -files0-from - -maxdepth 0 -type f -empty

              The  use  of  `-files0-from -`  means to read the names of the starting points from
              standard input, i.e., from the pipe; and -maxdepth 0 ensures that  only  explicitly
              those  entries  are examined without recursing into directories (in the case one of
              the starting points is one).

   Executing a command for each file
       •      Run file on every file in or below the current directory.

                  $ find . -type f -exec file '{}' \;

              Notice that the braces are enclosed in single quote  marks  to  protect  them  from
              interpretation  as  shell script punctuation.  The semicolon is similarly protected
              by the use of a backslash, though single quotes could have been used in  that  case
              also.

       In  many  cases,  one might prefer the `-exec ... +` or better the `-execdir ... +` syntax
       for performance and security reasons.

   Traversing the filesystem just once - for 2 different actions
       •      Traverse the filesystem just once, listing set-user-ID files and  directories  into
              /root/suid.txt and large files into /root/big.txt.

                  $ find / \
                      \( -perm -4000 -fprintf /root/suid.txt '%#m %u %p\n' \) , \
                      \( -size +100M -fprintf /root/big.txt '%-10s %p\n' \)

              This  example  uses  the  line-continuation character '\' on the first two lines to
              instruct the shell to continue reading the command on the next line.

   Searching files by age
       •      Search for files in your home directory  which  have  been  modified  in  the  last
              twenty-four hours.

                  $ find $HOME -mtime 0

              This  command  works this way because the time since each file was last modified is
              divided by 24 hours and any remainder is  discarded.   That  means  that  to  match
              -mtime 0, a file will have to have a modification in the past which is less than 24
              hours ago.

   Searching files by permissions
       •      Search for files which are executable but not readable.

                  $ find /sbin /usr/sbin -executable \! -readable -print

       •      Search for files which have read and write permission for their owner,  and  group,
              but which other users can read but not write to.

                  $ find . -perm 664

              Files which meet these criteria but have other permissions bits set (for example if
              someone can execute the file) will not be matched.

       •      Search for files which have read and write permission for their  owner  and  group,
              and  which  other  users  can  read,  without  regard  to the presence of any extra
              permission bits (for example the executable bit).

                  $ find . -perm -664

              This will match a file which has mode 0777, for example.

       •      Search for files which are writable by somebody (their owner, or  their  group,  or
              anybody else).

                  $ find . -perm /222

       •      Search for files which are writable by either their owner or their group.

                  $ find . -perm /220
                  $ find . -perm /u+w,g+w
                  $ find . -perm /u=w,g=w

              All  three  of  these  commands do the same thing, but the first one uses the octal
              representation of the file mode, and the other two  use  the  symbolic  form.   The
              files  don't  have to be writable by both the owner and group to be matched; either
              will do.

       •      Search for files which are writable by both their owner and their group.

                  $ find . -perm -220
                  $ find . -perm -g+w,u+w

              Both these commands do the same thing.

       •      A more elaborate search on permissions.

                  $ find . -perm -444 -perm /222 \! -perm /111
                  $ find . -perm -a+r -perm /a+w \! -perm /a+x

              These two commands both search for files that are  readable  for  everybody  (-perm
              -444 or -perm -a+r), have at least one write bit set (-perm /222 or -perm /a+w) but
              are not executable for anybody (! -perm /111 or ! -perm /a+x respectively).

   Pruning - omitting files and subdirectories
       •      Copy the contents of /source-dir to /dest-dir, but omit files and directories named
              .snapshot  (and  anything  in them).  It also omits files or directories whose name
              ends in `~', but not their contents.

                  $ cd /source-dir
                  $ find . -name .snapshot -prune -o \( \! -name '*~' -print0 \) \
                      | cpio -pmd0 /dest-dir

              The construct -prune -o \( ... -print0 \) is quite common.  The idea here  is  that
              the  expression  before -prune matches things which are to be pruned.  However, the
              -prune action itself returns true, so the following -o ensures that the right  hand
              side  is evaluated only for those directories which didn't get pruned (the contents
              of the pruned directories are not even visited, so their contents are  irrelevant).
              The expression on the right hand side of the -o is in parentheses only for clarity.
              It emphasises that the -print0 action takes place only for things that didn't  have
              -prune  applied  to  them.  Because the default `and' condition between tests binds
              more tightly than -o, this is the default anyway, but the parentheses help to  show
              what is going on.

       •      Given  the  following directory of projects and their associated SCM administrative
              directories, perform an efficient search for the projects' roots:

                  $ find repo/ \
                      \( -exec test -d '{}/.svn' \; \
                      -or -exec test -d '{}/.git' \; \
                      -or -exec test -d '{}/CVS' \; \
                      \) -print -prune

              Sample output:

                  repo/project1/CVS
                  repo/gnu/project2/.svn
                  repo/gnu/project3/.svn
                  repo/gnu/project3/src/.svn
                  repo/project4/.git

              In this example, -prune prevents unnecessary descent  into  directories  that  have
              already  been  discovered  (for  example  we  do not search project3/src because we
              already  found  project3/.svn),  but  ensures  sibling  directories  (project2  and
              project3) are found.

   Other useful examples
       •      Search for several file types.

                  $ find /tmp -type f,d,l

              Search  for  files,  directories,  and symbolic links in the directory /tmp passing
              these  types  as  a  comma-separated  list  (GNU  extension),  which  is  otherwise
              equivalent to the longer, yet more portable:

                  $ find /tmp \( -type f -o -type d -o -type l \)

       •      Search  for files with the particular name needle and stop immediately when we find
              the first one.

                  $ find / -name needle -print -quit

       •      Demonstrate the interpretation of the %f and %h format directives  of  the  -printf
              action for some corner-cases.  Here is an example including some output.

                  $ find . .. / /tmp /tmp/TRACE compile compile/64/tests/find -maxdepth 0 -printf '[%h][%f]\n'
                  [.][.]
                  [.][..]
                  [][/]
                  [][tmp]
                  [/tmp][TRACE]
                  [.][compile]
                  [compile/64/tests][find]

EXIT STATUS

       find exits with status 0 if all files are processed successfully, greater than 0 if errors
       occur.  This is deliberately a very broad description, but if the  return  value  is  non-
       zero, you should not rely on the correctness of the results of find.

       When  some  error  occurs,  find  may stop immediately, without completing all the actions
       specified.  For example, some starting points may not have been examined or  some  pending
       program invocations for -exec ... {} + or -execdir ... {} + may not have been performed.

HISTORY

       As  of  findutils-4.2.2,  shell  metacharacters  (`*',  `?'  or  `[]' for example) used in
       filename patterns match a leading `.', because  IEEE  POSIX  interpretation  126  requires
       this.

       As of findutils-4.3.3, -perm /000 now matches all files instead of none.

       Nanosecond-resolution timestamps were implemented in findutils-4.3.3.

       As of findutils-4.3.11, the -delete action sets find's exit status to a nonzero value when
       it fails.  However, find will not exit immediately.  Previously, find's  exit  status  was
       unaffected by the failure of -delete.

       Feature                Added in   Also occurs in
       -files0-from           4.9.0
       -newerXY               4.3.3      BSD
       -D                     4.3.1
       -O                     4.3.1
       -readable              4.3.0
       -writable              4.3.0
       -executable            4.3.0
       -regextype             4.2.24
       -exec ... +            4.2.12     POSIX
       -execdir               4.2.12     BSD
       -okdir                 4.2.12
       -samefile              4.2.11

       -H                     4.2.5      POSIX
       -L                     4.2.5      POSIX
       -P                     4.2.5      BSD
       -delete                4.2.3
       -quit                  4.2.3
       -d                     4.2.3      BSD
       -wholename             4.2.0
       -iwholename            4.2.0
       -ignore_readdir_race   4.2.0
       -fls                   4.0
       -ilname                3.8
       -iname                 3.8
       -ipath                 3.8
       -iregex                3.8

       The  syntax  -perm  +MODE  was removed in findutils-4.5.12, in favour of -perm /MODE.  The
       +MODE syntax had been deprecated since findutils-4.2.21 which was released in 2005.

NON-BUGS

   Operator precedence surprises
       The command find . -name afile -o -name bfile -print will never print afile  because  this
       is  actually  equivalent  to  find . -name afile -o \( -name bfile -a -print \).  Remember
       that the precedence of -a is higher than  that  of  -o  and  when  there  is  no  operator
       specified between tests, -a is assumed.

   “paths must precede expression” error message
       $ find . -name *.c -print
       find: paths must precede expression
       find: possible unquoted pattern after predicate `-name'?

       This  happens  when  the  shell  could  expand  the pattern *.c to more than one file name
       existing in the current directory, and passing the resulting file  names  in  the  command
       line to find like this:
       find . -name frcode.c locate.c word_io.c -print
       That  command  is  of course not going to work, because the -name predicate allows exactly
       only one pattern as argument.  Instead of doing things this way, you  should  enclose  the
       pattern  in  quotes or escape the wildcard, thus allowing find to use the pattern with the
       wildcard during the search for file name matching instead of file names  expanded  by  the
       parent shell:
       $ find . -name '*.c' -print
       $ find . -name \*.c -print

BUGS

       There  are  security  problems inherent in the behaviour that the POSIX standard specifies
       for find, which therefore cannot be fixed.  For example, the -exec  action  is  inherently
       insecure, and -execdir should be used instead.

       The environment variable LC_COLLATE has no effect on the -ok action.

REPORTING BUGS

       GNU findutils online help: <https://www.gnu.org/software/findutils/#get-help>
       Report any translation bugs to <https://translationproject.org/team/>

       Report any other issue via the form at the GNU Savannah bug tracker:
              <https://savannah.gnu.org/bugs/?group=findutils>
       General  topics about the GNU findutils package are discussed at the bug-findutils mailing
       list:
              <https://lists.gnu.org/mailman/listinfo/bug-findutils>

COPYRIGHT

       Copyright © 1990-2022 Free Software Foundation, Inc.  License GPLv3+: GNU GPL version 3 or
       later <https://gnu.org/licenses/gpl.html>.
       This  is free software: you are free to change and redistribute it.  There is NO WARRANTY,
       to the extent permitted by law.

SEE ALSO

       chmod(1), locate(1), ls(1), updatedb(1), xargs(1), lstat(2), stat(2), ctime(3) fnmatch(3),
       printf(3), strftime(3), locatedb(5), regex(7)

       Full documentation <https://www.gnu.org/software/findutils/find>
       or available locally via: info find

                                                                                          FIND(1)