Provided by: git-man_2.43.0-1ubuntu7.1_all 
NAME
git-pull - Fetch from and integrate with another repository or a local branch
SYNOPSIS
git pull [<options>] [<repository> [<refspec>...]]
DESCRIPTION
Incorporates changes from a remote repository into the current branch. If the current
branch is behind the remote, then by default it will fast-forward the current branch to
match the remote. If the current branch and the remote have diverged, the user needs to
specify how to reconcile the divergent branches with --rebase or --no-rebase (or the
corresponding configuration option in pull.rebase).
More precisely, git pull runs git fetch with the given parameters and then depending on
configuration options or command line flags, will call either git rebase or git merge to
reconcile diverging branches.
<repository> should be the name of a remote repository as passed to git-fetch(1).
<refspec> can name an arbitrary remote ref (for example, the name of a tag) or even a
collection of refs with corresponding remote-tracking branches (e.g.,
refs/heads/*:refs/remotes/origin/*), but usually it is the name of a branch in the remote
repository.
Default values for <repository> and <branch> are read from the "remote" and "merge"
configuration for the current branch as set by git-branch(1) --track.
Assume the following history exists and the current branch is "master":
A---B---C master on origin
/
D---E---F---G master
^
origin/master in your repository
Then "git pull" will fetch and replay the changes from the remote master branch since it
diverged from the local master (i.e., E) until its current commit (C) on top of master and
record the result in a new commit along with the names of the two parent commits and a log
message from the user describing the changes.
A---B---C origin/master
/ \
D---E---F---G---H master
See git-merge(1) for details, including how conflicts are presented and handled.
In Git 1.7.0 or later, to cancel a conflicting merge, use git reset --merge. Warning: In
older versions of Git, running git pull with uncommitted changes is discouraged: while
possible, it leaves you in a state that may be hard to back out of in the case of a
conflict.
If any of the remote changes overlap with local uncommitted changes, the merge will be
automatically canceled and the work tree untouched. It is generally best to get any local
changes in working order before pulling or stash them away with git-stash(1).
OPTIONS
-q, --quiet
This is passed to both underlying git-fetch to squelch reporting of during transfer,
and underlying git-merge to squelch output during merging.
-v, --verbose
Pass --verbose to git-fetch and git-merge.
--[no-]recurse-submodules[=yes|on-demand|no]
This option controls if new commits of populated submodules should be fetched, and if
the working trees of active submodules should be updated, too (see git-fetch(1), git-
config(1) and gitmodules(5)).
If the checkout is done via rebase, local submodule commits are rebased as well.
If the update is done via merge, the submodule conflicts are resolved and checked out.
Options related to merging
--commit, --no-commit
Perform the merge and commit the result. This option can be used to override
--no-commit. Only useful when merging.
With --no-commit perform the merge and stop just before creating a merge commit, to
give the user a chance to inspect and further tweak the merge result before
committing.
Note that fast-forward updates do not create a merge commit and therefore there is no
way to stop those merges with --no-commit. Thus, if you want to ensure your branch is
not changed or updated by the merge command, use --no-ff with --no-commit.
--edit, -e, --no-edit
Invoke an editor before committing successful mechanical merge to further edit the
auto-generated merge message, so that the user can explain and justify the merge. The
--no-edit option can be used to accept the auto-generated message (this is generally
discouraged).
Older scripts may depend on the historical behaviour of not allowing the user to edit
the merge log message. They will see an editor opened when they run git merge. To make
it easier to adjust such scripts to the updated behaviour, the environment variable
GIT_MERGE_AUTOEDIT can be set to no at the beginning of them.
--cleanup=<mode>
This option determines how the merge message will be cleaned up before committing. See
git-commit(1) for more details. In addition, if the <mode> is given a value of
scissors, scissors will be appended to MERGE_MSG before being passed on to the commit
machinery in the case of a merge conflict.
--ff-only
Only update to the new history if there is no divergent local history. This is the
default when no method for reconciling divergent histories is provided (via the
--rebase=* flags).
--ff, --no-ff
When merging rather than rebasing, specifies how a merge is handled when the merged-in
history is already a descendant of the current history. If merging is requested, --ff
is the default unless merging an annotated (and possibly signed) tag that is not
stored in its natural place in the refs/tags/ hierarchy, in which case --no-ff is
assumed.
With --ff, when possible resolve the merge as a fast-forward (only update the branch
pointer to match the merged branch; do not create a merge commit). When not possible
(when the merged-in history is not a descendant of the current history), create a
merge commit.
With --no-ff, create a merge commit in all cases, even when the merge could instead be
resolved as a fast-forward.
-S[<keyid>], --gpg-sign[=<keyid>], --no-gpg-sign
GPG-sign the resulting merge commit. The keyid argument is optional and defaults to
the committer identity; if specified, it must be stuck to the option without a space.
--no-gpg-sign is useful to countermand both commit.gpgSign configuration variable, and
earlier --gpg-sign.
--log[=<n>], --no-log
In addition to branch names, populate the log message with one-line descriptions from
at most <n> actual commits that are being merged. See also git-fmt-merge-msg(1). Only
useful when merging.
With --no-log do not list one-line descriptions from the actual commits being merged.
--signoff, --no-signoff
Add a Signed-off-by trailer by the committer at the end of the commit log message. The
meaning of a signoff depends on the project to which you’re committing. For example,
it may certify that the committer has the rights to submit the work under the
project’s license or agrees to some contributor representation, such as a Developer
Certificate of Origin. (See http://developercertificate.org for the one used by the
Linux kernel and Git projects.) Consult the documentation or leadership of the project
to which you’re contributing to understand how the signoffs are used in that project.
The --no-signoff option can be used to countermand an earlier --signoff option on the
command line.
--stat, -n, --no-stat
Show a diffstat at the end of the merge. The diffstat is also controlled by the
configuration option merge.stat.
With -n or --no-stat do not show a diffstat at the end of the merge.
--squash, --no-squash
Produce the working tree and index state as if a real merge happened (except for the
merge information), but do not actually make a commit, move the HEAD, or record
$GIT_DIR/MERGE_HEAD (to cause the next git commit command to create a merge commit).
This allows you to create a single commit on top of the current branch whose effect is
the same as merging another branch (or more in case of an octopus).
With --no-squash perform the merge and commit the result. This option can be used to
override --squash.
With --squash, --commit is not allowed, and will fail.
Only useful when merging.
--[no-]verify
By default, the pre-merge and commit-msg hooks are run. When --no-verify is given,
these are bypassed. See also githooks(5). Only useful when merging.
-s <strategy>, --strategy=<strategy>
Use the given merge strategy; can be supplied more than once to specify them in the
order they should be tried. If there is no -s option, a built-in list of strategies is
used instead (ort when merging a single head, octopus otherwise).
-X <option>, --strategy-option=<option>
Pass merge strategy specific option through to the merge strategy.
--verify-signatures, --no-verify-signatures
Verify that the tip commit of the side branch being merged is signed with a valid key,
i.e. a key that has a valid uid: in the default trust model, this means the signing
key has been signed by a trusted key. If the tip commit of the side branch is not
signed with a valid key, the merge is aborted.
Only useful when merging.
--summary, --no-summary
Synonyms to --stat and --no-stat; these are deprecated and will be removed in the
future.
--autostash, --no-autostash
Automatically create a temporary stash entry before the operation begins, record it in
the special ref MERGE_AUTOSTASH and apply it after the operation ends. This means that
you can run the operation on a dirty worktree. However, use with care: the final stash
application after a successful merge might result in non-trivial conflicts.
--allow-unrelated-histories
By default, git merge command refuses to merge histories that do not share a common
ancestor. This option can be used to override this safety when merging histories of
two projects that started their lives independently. As that is a very rare occasion,
no configuration variable to enable this by default exists and will not be added.
Only useful when merging.
-r, --rebase[=false|true|merges|interactive]
When true, rebase the current branch on top of the upstream branch after fetching. If
there is a remote-tracking branch corresponding to the upstream branch and the
upstream branch was rebased since last fetched, the rebase uses that information to
avoid rebasing non-local changes.
When set to merges, rebase using git rebase --rebase-merges so that the local merge
commits are included in the rebase (see git-rebase(1) for details).
When false, merge the upstream branch into the current branch.
When interactive, enable the interactive mode of rebase.
See pull.rebase, branch.<name>.rebase and branch.autoSetupRebase in git-config(1) if
you want to make git pull always use --rebase instead of merging.
Note
This is a potentially dangerous mode of operation. It rewrites history, which does
not bode well when you published that history already. Do not use this option
unless you have read git-rebase(1) carefully.
--no-rebase
This is shorthand for --rebase=false.
Options related to fetching
--all
Fetch all remotes.
-a, --append
Append ref names and object names of fetched refs to the existing contents of
.git/FETCH_HEAD. Without this option old data in .git/FETCH_HEAD will be overwritten.
--atomic
Use an atomic transaction to update local refs. Either all refs are updated, or on
error, no refs are updated.
--depth=<depth>
Limit fetching to the specified number of commits from the tip of each remote branch
history. If fetching to a shallow repository created by git clone with --depth=<depth>
option (see git-clone(1)), deepen or shorten the history to the specified number of
commits. Tags for the deepened commits are not fetched.
--deepen=<depth>
Similar to --depth, except it specifies the number of commits from the current shallow
boundary instead of from the tip of each remote branch history.
--shallow-since=<date>
Deepen or shorten the history of a shallow repository to include all reachable commits
after <date>.
--shallow-exclude=<revision>
Deepen or shorten the history of a shallow repository to exclude commits reachable
from a specified remote branch or tag. This option can be specified multiple times.
--unshallow
If the source repository is complete, convert a shallow repository to a complete one,
removing all the limitations imposed by shallow repositories.
If the source repository is shallow, fetch as much as possible so that the current
repository has the same history as the source repository.
--update-shallow
By default when fetching from a shallow repository, git fetch refuses refs that
require updating .git/shallow. This option updates .git/shallow and accepts such refs.
--negotiation-tip=<commit|glob>
By default, Git will report, to the server, commits reachable from all local refs to
find common commits in an attempt to reduce the size of the to-be-received packfile.
If specified, Git will only report commits reachable from the given tips. This is
useful to speed up fetches when the user knows which local ref is likely to have
commits in common with the upstream ref being fetched.
This option may be specified more than once; if so, Git will report commits reachable
from any of the given commits.
The argument to this option may be a glob on ref names, a ref, or the (possibly
abbreviated) SHA-1 of a commit. Specifying a glob is equivalent to specifying this
option multiple times, one for each matching ref name.
See also the fetch.negotiationAlgorithm and push.negotiate configuration variables
documented in git-config(1), and the --negotiate-only option below.
--negotiate-only
Do not fetch anything from the server, and instead print the ancestors of the provided
--negotiation-tip=* arguments, which we have in common with the server.
This is incompatible with --recurse-submodules=[yes|on-demand]. Internally this is
used to implement the push.negotiate option, see git-config(1).
--dry-run
Show what would be done, without making any changes.
--porcelain
Print the output to standard output in an easy-to-parse format for scripts. See
section OUTPUT in git-fetch(1) for details.
This is incompatible with --recurse-submodules=[yes|on-demand] and takes precedence
over the fetch.output config option.
-f, --force
When git fetch is used with <src>:<dst> refspec, it may refuse to update the local
branch as discussed in the <refspec> part of the git-fetch(1) documentation. This
option overrides that check.
-k, --keep
Keep downloaded pack.
--prefetch
Modify the configured refspec to place all refs into the refs/prefetch/ namespace. See
the prefetch task in git-maintenance(1).
-p, --prune
Before fetching, remove any remote-tracking references that no longer exist on the
remote. Tags are not subject to pruning if they are fetched only because of the
default tag auto-following or due to a --tags option. However, if tags are fetched due
to an explicit refspec (either on the command line or in the remote configuration, for
example if the remote was cloned with the --mirror option), then they are also subject
to pruning. Supplying --prune-tags is a shorthand for providing the tag refspec.
--no-tags
By default, tags that point at objects that are downloaded from the remote repository
are fetched and stored locally. This option disables this automatic tag following. The
default behavior for a remote may be specified with the remote.<name>.tagOpt setting.
See git-config(1).
--refmap=<refspec>
When fetching refs listed on the command line, use the specified refspec (can be given
more than once) to map the refs to remote-tracking branches, instead of the values of
remote.*.fetch configuration variables for the remote repository. Providing an empty
<refspec> to the --refmap option causes Git to ignore the configured refspecs and rely
entirely on the refspecs supplied as command-line arguments. See section on
"Configured Remote-tracking Branches" for details.
-t, --tags
Fetch all tags from the remote (i.e., fetch remote tags refs/tags/* into local tags
with the same name), in addition to whatever else would otherwise be fetched. Using
this option alone does not subject tags to pruning, even if --prune is used (though
tags may be pruned anyway if they are also the destination of an explicit refspec; see
--prune).
-j, --jobs=<n>
Number of parallel children to be used for all forms of fetching.
If the --multiple option was specified, the different remotes will be fetched in
parallel. If multiple submodules are fetched, they will be fetched in parallel. To
control them independently, use the config settings fetch.parallel and
submodule.fetchJobs (see git-config(1)).
Typically, parallel recursive and multi-remote fetches will be faster. By default
fetches are performed sequentially, not in parallel.
--set-upstream
If the remote is fetched successfully, add upstream (tracking) reference, used by
argument-less git-pull(1) and other commands. For more information, see
branch.<name>.merge and branch.<name>.remote in git-config(1).
--upload-pack <upload-pack>
When given, and the repository to fetch from is handled by git fetch-pack,
--exec=<upload-pack> is passed to the command to specify non-default path for the
command run on the other end.
--progress
Progress status is reported on the standard error stream by default when it is
attached to a terminal, unless -q is specified. This flag forces progress status even
if the standard error stream is not directed to a terminal.
-o <option>, --server-option=<option>
Transmit the given string to the server when communicating using protocol version 2.
The given string must not contain a NUL or LF character. The server’s handling of
server options, including unknown ones, is server-specific. When multiple
--server-option=<option> are given, they are all sent to the other side in the order
listed on the command line.
--show-forced-updates
By default, git checks if a branch is force-updated during fetch. This can be disabled
through fetch.showForcedUpdates, but the --show-forced-updates option guarantees this
check occurs. See git-config(1).
--no-show-forced-updates
By default, git checks if a branch is force-updated during fetch. Pass
--no-show-forced-updates or set fetch.showForcedUpdates to false to skip this check
for performance reasons. If used during git-pull the --ff-only option will still check
for forced updates before attempting a fast-forward update. See git-config(1).
-4, --ipv4
Use IPv4 addresses only, ignoring IPv6 addresses.
-6, --ipv6
Use IPv6 addresses only, ignoring IPv4 addresses.
<repository>
The "remote" repository that is the source of a fetch or pull operation. This
parameter can be either a URL (see the section GIT URLS below) or the name of a remote
(see the section REMOTES below).
<refspec>
Specifies which refs to fetch and which local refs to update. When no <refspec>s
appear on the command line, the refs to fetch are read from remote.<repository>.fetch
variables instead (see the section "CONFIGURED REMOTE-TRACKING BRANCHES" in git-
fetch(1)).
The format of a <refspec> parameter is an optional plus +, followed by the source
<src>, followed by a colon :, followed by the destination ref <dst>. The colon can be
omitted when <dst> is empty. <src> is typically a ref, but it can also be a fully
spelled hex object name.
A <refspec> may contain a * in its <src> to indicate a simple pattern match. Such a
refspec functions like a glob that matches any ref with the same prefix. A pattern
<refspec> must have a * in both the <src> and <dst>. It will map refs to the
destination by replacing the * with the contents matched from the source.
If a refspec is prefixed by ^, it will be interpreted as a negative refspec. Rather
than specifying which refs to fetch or which local refs to update, such a refspec will
instead specify refs to exclude. A ref will be considered to match if it matches at
least one positive refspec, and does not match any negative refspec. Negative refspecs
can be useful to restrict the scope of a pattern refspec so that it will not include
specific refs. Negative refspecs can themselves be pattern refspecs. However, they may
only contain a <src> and do not specify a <dst>. Fully spelled out hex object names
are also not supported.
tag <tag> means the same as refs/tags/<tag>:refs/tags/<tag>; it requests fetching
everything up to the given tag.
The remote ref that matches <src> is fetched, and if <dst> is not an empty string, an
attempt is made to update the local ref that matches it.
Whether that update is allowed without --force depends on the ref namespace it’s being
fetched to, the type of object being fetched, and whether the update is considered to
be a fast-forward. Generally, the same rules apply for fetching as when pushing, see
the <refspec>... section of git-push(1) for what those are. Exceptions to those rules
particular to git fetch are noted below.
Until Git version 2.20, and unlike when pushing with git-push(1), any updates to
refs/tags/* would be accepted without + in the refspec (or --force). When fetching, we
promiscuously considered all tag updates from a remote to be forced fetches. Since Git
version 2.20, fetching to update refs/tags/* works the same way as when pushing. I.e.
any updates will be rejected without + in the refspec (or --force).
Unlike when pushing with git-push(1), any updates outside of refs/{tags,heads}/* will
be accepted without + in the refspec (or --force), whether that’s swapping e.g. a tree
object for a blob, or a commit for another commit that doesn’t have the previous
commit as an ancestor etc.
Unlike when pushing with git-push(1), there is no configuration which’ll amend these
rules, and nothing like a pre-fetch hook analogous to the pre-receive hook.
As with pushing with git-push(1), all of the rules described above about what’s not
allowed as an update can be overridden by adding an optional leading + to a refspec
(or using the --force command line option). The only exception to this is that no
amount of forcing will make the refs/heads/* namespace accept a non-commit object.
Note
When the remote branch you want to fetch is known to be rewound and rebased
regularly, it is expected that its new tip will not be a descendant of its
previous tip (as stored in your remote-tracking branch the last time you fetched).
You would want to use the + sign to indicate non-fast-forward updates will be
needed for such branches. There is no way to determine or declare that a branch
will be made available in a repository with this behavior; the pulling user simply
must know this is the expected usage pattern for a branch.
Note
There is a difference between listing multiple <refspec> directly on git pull
command line and having multiple remote.<repository>.fetch entries in your
configuration for a <repository> and running a git pull command without any
explicit <refspec> parameters. <refspec>s listed explicitly on the command line
are always merged into the current branch after fetching. In other words, if you
list more than one remote ref, git pull will create an Octopus merge. On the other
hand, if you do not list any explicit <refspec> parameter on the command line, git
pull will fetch all the <refspec>s it finds in the remote.<repository>.fetch
configuration and merge only the first <refspec> found into the current branch.
This is because making an Octopus from remote refs is rarely done, while keeping
track of multiple remote heads in one-go by fetching more than one is often
useful.
GIT URLS
In general, URLs contain information about the transport protocol, the address of the
remote server, and the path to the repository. Depending on the transport protocol, some
of this information may be absent.
Git supports ssh, git, http, and https protocols (in addition, ftp and ftps can be used
for fetching, but this is inefficient and deprecated; do not use them).
The native transport (i.e. git:// URL) does no authentication and should be used with
caution on unsecured networks.
The following syntaxes may be used with them:
• ssh://[user@]host.xz[:port]/path/to/repo.git/
• git://host.xz[:port]/path/to/repo.git/
• http[s]://host.xz[:port]/path/to/repo.git/
• ftp[s]://host.xz[:port]/path/to/repo.git/
An alternative scp-like syntax may also be used with the ssh protocol:
• [user@]host.xz:path/to/repo.git/
This syntax is only recognized if there are no slashes before the first colon. This helps
differentiate a local path that contains a colon. For example the local path foo:bar could
be specified as an absolute path or ./foo:bar to avoid being misinterpreted as an ssh url.
The ssh and git protocols additionally support ~username expansion:
• ssh://[user@]host.xz[:port]/~[user]/path/to/repo.git/
• git://host.xz[:port]/~[user]/path/to/repo.git/
• [user@]host.xz:/~[user]/path/to/repo.git/
For local repositories, also supported by Git natively, the following syntaxes may be
used:
• /path/to/repo.git/
• file:///path/to/repo.git/
These two syntaxes are mostly equivalent, except when cloning, when the former implies
--local option. See git-clone(1) for details.
git clone, git fetch and git pull, but not git push, will also accept a suitable bundle
file. See git-bundle(1).
When Git doesn’t know how to handle a certain transport protocol, it attempts to use the
remote-<transport> remote helper, if one exists. To explicitly request a remote helper,
the following syntax may be used:
• <transport>::<address>
where <address> may be a path, a server and path, or an arbitrary URL-like string
recognized by the specific remote helper being invoked. See gitremote-helpers(7) for
details.
If there are a large number of similarly-named remote repositories and you want to use a
different format for them (such that the URLs you use will be rewritten into URLs that
work), you can create a configuration section of the form:
[url "<actual url base>"]
insteadOf = <other url base>
For example, with this:
[url "git://git.host.xz/"]
insteadOf = host.xz:/path/to/
insteadOf = work:
a URL like "work:repo.git" or like "host.xz:/path/to/repo.git" will be rewritten in any
context that takes a URL to be "git://git.host.xz/repo.git".
If you want to rewrite URLs for push only, you can create a configuration section of the
form:
[url "<actual url base>"]
pushInsteadOf = <other url base>
For example, with this:
[url "ssh://example.org/"]
pushInsteadOf = git://example.org/
a URL like "git://example.org/path/to/repo.git" will be rewritten to
"ssh://example.org/path/to/repo.git" for pushes, but pulls will still use the original
URL.
REMOTES
The name of one of the following can be used instead of a URL as <repository> argument:
• a remote in the Git configuration file: $GIT_DIR/config,
• a file in the $GIT_DIR/remotes directory, or
• a file in the $GIT_DIR/branches directory.
All of these also allow you to omit the refspec from the command line because they each
contain a refspec which git will use by default.
Named remote in configuration file
You can choose to provide the name of a remote which you had previously configured using
git-remote(1), git-config(1) or even by a manual edit to the $GIT_DIR/config file. The URL
of this remote will be used to access the repository. The refspec of this remote will be
used by default when you do not provide a refspec on the command line. The entry in the
config file would appear like this:
[remote "<name>"]
url = <URL>
pushurl = <pushurl>
push = <refspec>
fetch = <refspec>
The <pushurl> is used for pushes only. It is optional and defaults to <URL>. Pushing to a
remote affects all defined pushurls or all defined urls if no pushurls are defined. Fetch,
however, will only fetch from the first defined url if multiple urls are defined.
Named file in $GIT_DIR/remotes
You can choose to provide the name of a file in $GIT_DIR/remotes. The URL in this file
will be used to access the repository. The refspec in this file will be used as default
when you do not provide a refspec on the command line. This file should have the following
format:
URL: one of the above URL formats
Push: <refspec>
Pull: <refspec>
Push: lines are used by git push and Pull: lines are used by git pull and git fetch.
Multiple Push: and Pull: lines may be specified for additional branch mappings.
Named file in $GIT_DIR/branches
You can choose to provide the name of a file in $GIT_DIR/branches. The URL in this file
will be used to access the repository. This file should have the following format:
<URL>#<head>
<URL> is required; #<head> is optional.
Depending on the operation, git will use one of the following refspecs, if you don’t
provide one on the command line. <branch> is the name of this file in $GIT_DIR/branches
and <head> defaults to master.
git fetch uses:
refs/heads/<head>:refs/heads/<branch>
git push uses:
HEAD:refs/heads/<head>
MERGE STRATEGIES
The merge mechanism (git merge and git pull commands) allows the backend merge strategies
to be chosen with -s option. Some strategies can also take their own options, which can be
passed by giving -X<option> arguments to git merge and/or git pull.
ort
This is the default merge strategy when pulling or merging one branch. This strategy
can only resolve two heads using a 3-way merge algorithm. When there is more than one
common ancestor that can be used for 3-way merge, it creates a merged tree of the
common ancestors and uses that as the reference tree for the 3-way merge. This has
been reported to result in fewer merge conflicts without causing mismerges by tests
done on actual merge commits taken from Linux 2.6 kernel development history.
Additionally this strategy can detect and handle merges involving renames. It does not
make use of detected copies. The name for this algorithm is an acronym ("Ostensibly
Recursive’s Twin") and came from the fact that it was written as a replacement for the
previous default algorithm, recursive.
The ort strategy can take the following options:
ours
This option forces conflicting hunks to be auto-resolved cleanly by favoring our
version. Changes from the other tree that do not conflict with our side are
reflected in the merge result. For a binary file, the entire contents are taken
from our side.
This should not be confused with the ours merge strategy, which does not even look
at what the other tree contains at all. It discards everything the other tree did,
declaring our history contains all that happened in it.
theirs
This is the opposite of ours; note that, unlike ours, there is no theirs merge
strategy to confuse this merge option with.
ignore-space-change, ignore-all-space, ignore-space-at-eol, ignore-cr-at-eol
Treats lines with the indicated type of whitespace change as unchanged for the
sake of a three-way merge. Whitespace changes mixed with other changes to a line
are not ignored. See also git-diff(1) -b, -w, --ignore-space-at-eol, and
--ignore-cr-at-eol.
• If their version only introduces whitespace changes to a line, our version is
used;
• If our version introduces whitespace changes but their version includes a
substantial change, their version is used;
• Otherwise, the merge proceeds in the usual way.
renormalize
This runs a virtual check-out and check-in of all three stages of a file when
resolving a three-way merge. This option is meant to be used when merging branches
with different clean filters or end-of-line normalization rules. See "Merging
branches with differing checkin/checkout attributes" in gitattributes(5) for
details.
no-renormalize
Disables the renormalize option. This overrides the merge.renormalize
configuration variable.
find-renames[=<n>]
Turn on rename detection, optionally setting the similarity threshold. This is the
default. This overrides the merge.renames configuration variable. See also git-
diff(1) --find-renames.
rename-threshold=<n>
Deprecated synonym for find-renames=<n>.
subtree[=<path>]
This option is a more advanced form of subtree strategy, where the strategy makes
a guess on how two trees must be shifted to match with each other when merging.
Instead, the specified path is prefixed (or stripped from the beginning) to make
the shape of two trees to match.
recursive
This can only resolve two heads using a 3-way merge algorithm. When there is more than
one common ancestor that can be used for 3-way merge, it creates a merged tree of the
common ancestors and uses that as the reference tree for the 3-way merge. This has
been reported to result in fewer merge conflicts without causing mismerges by tests
done on actual merge commits taken from Linux 2.6 kernel development history.
Additionally this can detect and handle merges involving renames. It does not make use
of detected copies. This was the default strategy for resolving two heads from Git
v0.99.9k until v2.33.0.
The recursive strategy takes the same options as ort. However, there are three
additional options that ort ignores (not documented above) that are potentially useful
with the recursive strategy:
patience
Deprecated synonym for diff-algorithm=patience.
diff-algorithm=[patience|minimal|histogram|myers]
Use a different diff algorithm while merging, which can help avoid mismerges that
occur due to unimportant matching lines (such as braces from distinct functions).
See also git-diff(1) --diff-algorithm. Note that ort specifically uses
diff-algorithm=histogram, while recursive defaults to the diff.algorithm config
setting.
no-renames
Turn off rename detection. This overrides the merge.renames configuration
variable. See also git-diff(1) --no-renames.
resolve
This can only resolve two heads (i.e. the current branch and another branch you pulled
from) using a 3-way merge algorithm. It tries to carefully detect criss-cross merge
ambiguities. It does not handle renames.
octopus
This resolves cases with more than two heads, but refuses to do a complex merge that
needs manual resolution. It is primarily meant to be used for bundling topic branch
heads together. This is the default merge strategy when pulling or merging more than
one branch.
ours
This resolves any number of heads, but the resulting tree of the merge is always that
of the current branch head, effectively ignoring all changes from all other branches.
It is meant to be used to supersede old development history of side branches. Note
that this is different from the -Xours option to the recursive merge strategy.
subtree
This is a modified ort strategy. When merging trees A and B, if B corresponds to a
subtree of A, B is first adjusted to match the tree structure of A, instead of reading
the trees at the same level. This adjustment is also done to the common ancestor tree.
With the strategies that use 3-way merge (including the default, ort), if a change is made
on both branches, but later reverted on one of the branches, that change will be present
in the merged result; some people find this behavior confusing. It occurs because only the
heads and the merge base are considered when performing a merge, not the individual
commits. The merge algorithm therefore considers the reverted change as no change at all,
and substitutes the changed version instead.
DEFAULT BEHAVIOUR
Often people use git pull without giving any parameter. Traditionally, this has been
equivalent to saying git pull origin. However, when configuration branch.<name>.remote is
present while on branch <name>, that value is used instead of origin.
In order to determine what URL to use to fetch from, the value of the configuration
remote.<origin>.url is consulted and if there is not any such variable, the value on the
URL: line in $GIT_DIR/remotes/<origin> is used.
In order to determine what remote branches to fetch (and optionally store in the
remote-tracking branches) when the command is run without any refspec parameters on the
command line, values of the configuration variable remote.<origin>.fetch are consulted,
and if there aren’t any, $GIT_DIR/remotes/<origin> is consulted and its Pull: lines are
used. In addition to the refspec formats described in the OPTIONS section, you can have a
globbing refspec that looks like this:
refs/heads/*:refs/remotes/origin/*
A globbing refspec must have a non-empty RHS (i.e. must store what were fetched in
remote-tracking branches), and its LHS and RHS must end with /*. The above specifies that
all remote branches are tracked using remote-tracking branches in refs/remotes/origin/
hierarchy under the same name.
The rule to determine which remote branch to merge after fetching is a bit involved, in
order not to break backward compatibility.
If explicit refspecs were given on the command line of git pull, they are all merged.
When no refspec was given on the command line, then git pull uses the refspec from the
configuration or $GIT_DIR/remotes/<origin>. In such cases, the following rules apply:
1. If branch.<name>.merge configuration for the current branch <name> exists, that is the
name of the branch at the remote site that is merged.
2. If the refspec is a globbing one, nothing is merged.
3. Otherwise the remote branch of the first refspec is merged.
EXAMPLES
• Update the remote-tracking branches for the repository you cloned from, then merge one
of them into your current branch:
$ git pull
$ git pull origin
Normally the branch merged in is the HEAD of the remote repository, but the choice is
determined by the branch.<name>.remote and branch.<name>.merge options; see git-
config(1) for details.
• Merge into the current branch the remote branch next:
$ git pull origin next
This leaves a copy of next temporarily in FETCH_HEAD, and updates the remote-tracking
branch origin/next. The same can be done by invoking fetch and merge:
$ git fetch origin
$ git merge origin/next
If you tried a pull which resulted in complex conflicts and would want to start over, you
can recover with git reset.
SECURITY
The fetch and push protocols are not designed to prevent one side from stealing data from
the other repository that was not intended to be shared. If you have private data that you
need to protect from a malicious peer, your best option is to store it in another
repository. This applies to both clients and servers. In particular, namespaces on a
server are not effective for read access control; you should only grant read access to a
namespace to clients that you would trust with read access to the entire repository.
The known attack vectors are as follows:
1. The victim sends "have" lines advertising the IDs of objects it has that are not
explicitly intended to be shared but can be used to optimize the transfer if the peer
also has them. The attacker chooses an object ID X to steal and sends a ref to X, but
isn’t required to send the content of X because the victim already has it. Now the
victim believes that the attacker has X, and it sends the content of X back to the
attacker later. (This attack is most straightforward for a client to perform on a
server, by creating a ref to X in the namespace the client has access to and then
fetching it. The most likely way for a server to perform it on a client is to "merge"
X into a public branch and hope that the user does additional work on this branch and
pushes it back to the server without noticing the merge.)
2. As in #1, the attacker chooses an object ID X to steal. The victim sends an object Y
that the attacker already has, and the attacker falsely claims to have X and not Y, so
the victim sends Y as a delta against X. The delta reveals regions of X that are
similar to Y to the attacker.
BUGS
Using --recurse-submodules can only fetch new commits in already checked out submodules
right now. When e.g. upstream added a new submodule in the just fetched commits of the
superproject the submodule itself cannot be fetched, making it impossible to check out
that submodule later without having to do a fetch again. This is expected to be fixed in a
future Git version.
SEE ALSO
git-fetch(1), git-merge(1), git-config(1)
GIT
Part of the git(1) suite