Provided by: rsync_3.2.7-1ubuntu1_amd64 
NAME
rsync - a fast, versatile, remote (and local) file-copying tool
SYNOPSIS
Local:
rsync [OPTION...] SRC... [DEST]
Access via remote shell:
Pull:
rsync [OPTION...] [USER@]HOST:SRC... [DEST]
Push:
rsync [OPTION...] SRC... [USER@]HOST:DEST
Access via rsync daemon:
Pull:
rsync [OPTION...] [USER@]HOST::SRC... [DEST]
rsync [OPTION...] rsync://[USER@]HOST[:PORT]/SRC... [DEST]
Push:
rsync [OPTION...] SRC... [USER@]HOST::DEST
rsync [OPTION...] SRC... rsync://[USER@]HOST[:PORT]/DEST)
Usages with just one SRC arg and no DEST arg will list the source files instead of
copying.
The online version of this manpage (that includes cross-linking of topics) is available at
https://download.samba.org/pub/rsync/rsync.1.
DESCRIPTION
Rsync is a fast and extraordinarily versatile file copying tool. It can copy locally,
to/from another host over any remote shell, or to/from a remote rsync daemon. It offers a
large number of options that control every aspect of its behavior and permit very flexible
specification of the set of files to be copied. It is famous for its delta-transfer
algorithm, which reduces the amount of data sent over the network by sending only the
differences between the source files and the existing files in the destination. Rsync is
widely used for backups and mirroring and as an improved copy command for everyday use.
Rsync finds files that need to be transferred using a "quick check" algorithm (by default)
that looks for files that have changed in size or in last-modified time. Any changes in
the other preserved attributes (as requested by options) are made on the destination file
directly when the quick check indicates that the file's data does not need to be updated.
Some of the additional features of rsync are:
o support for copying links, devices, owners, groups, and permissions
o exclude and exclude-from options similar to GNU tar
o a CVS exclude mode for ignoring the same files that CVS would ignore
o can use any transparent remote shell, including ssh or rsh
o does not require super-user privileges
o pipelining of file transfers to minimize latency costs
o support for anonymous or authenticated rsync daemons (ideal for mirroring)
GENERAL
Rsync copies files either to or from a remote host, or locally on the current host (it
does not support copying files between two remote hosts).
There are two different ways for rsync to contact a remote system: using a remote-shell
program as the transport (such as ssh or rsh) or contacting an rsync daemon directly via
TCP. The remote-shell transport is used whenever the source or destination path contains
a single colon (:) separator after a host specification. Contacting an rsync daemon
directly happens when the source or destination path contains a double colon (::)
separator after a host specification, OR when an rsync:// URL is specified (see also the
USING RSYNC-DAEMON FEATURES VIA A REMOTE-SHELL CONNECTION section for an exception to this
latter rule).
As a special case, if a single source arg is specified without a destination, the files
are listed in an output format similar to "ls -l".
As expected, if neither the source or destination path specify a remote host, the copy
occurs locally (see also the --list-only option).
Rsync refers to the local side as the client and the remote side as the server. Don't
confuse server with an rsync daemon. A daemon is always a server, but a server can be
either a daemon or a remote-shell spawned process.
SETUP
See the file README.md for installation instructions.
Once installed, you can use rsync to any machine that you can access via a remote shell
(as well as some that you can access using the rsync daemon-mode protocol). For remote
transfers, a modern rsync uses ssh for its communications, but it may have been configured
to use a different remote shell by default, such as rsh or remsh.
You can also specify any remote shell you like, either by using the -e command line
option, or by setting the RSYNC_RSH environment variable.
Note that rsync must be installed on both the source and destination machines.
USAGE
You use rsync in the same way you use rcp. You must specify a source and a destination,
one of which may be remote.
Perhaps the best way to explain the syntax is with some examples:
rsync -t *.c foo:src/
This would transfer all files matching the pattern *.c from the current directory to the
directory src on the machine foo. If any of the files already exist on the remote system
then the rsync remote-update protocol is used to update the file by sending only the
differences in the data. Note that the expansion of wildcards on the command-line (*.c)
into a list of files is handled by the shell before it runs rsync and not by rsync itself
(exactly the same as all other Posix-style programs).
rsync -avz foo:src/bar /data/tmp
This would recursively transfer all files from the directory src/bar on the machine foo
into the /data/tmp/bar directory on the local machine. The files are transferred in
archive mode, which ensures that symbolic links, devices, attributes, permissions,
ownerships, etc. are preserved in the transfer. Additionally, compression will be used to
reduce the size of data portions of the transfer.
rsync -avz foo:src/bar/ /data/tmp
A trailing slash on the source changes this behavior to avoid creating an additional
directory level at the destination. You can think of a trailing / on a source as meaning
"copy the contents of this directory" as opposed to "copy the directory by name", but in
both cases the attributes of the containing directory are transferred to the containing
directory on the destination. In other words, each of the following commands copies the
files in the same way, including their setting of the attributes of /dest/foo:
rsync -av /src/foo /dest
rsync -av /src/foo/ /dest/foo
Note also that host and module references don't require a trailing slash to copy the
contents of the default directory. For example, both of these copy the remote directory's
contents into "/dest":
rsync -av host: /dest
rsync -av host::module /dest
You can also use rsync in local-only mode, where both the source and destination don't
have a ':' in the name. In this case it behaves like an improved copy command.
Finally, you can list all the (listable) modules available from a particular rsync daemon
by leaving off the module name:
rsync somehost.mydomain.com::
COPYING TO A DIFFERENT NAME
When you want to copy a directory to a different name, use a trailing slash on the source
directory to put the contents of the directory into any destination directory you like:
rsync -ai foo/ bar/
Rsync also has the ability to customize a destination file's name when copying a single
item. The rules for this are:
o The transfer list must consist of a single item (either a file or an empty
directory)
o The final element of the destination path must not exist as a directory
o The destination path must not have been specified with a trailing slash
Under those circumstances, rsync will set the name of the destination's single item to the
last element of the destination path. Keep in mind that it is best to only use this idiom
when copying a file and use the above trailing-slash idiom when copying a directory.
The following example copies the foo.c file as bar.c in the save dir (assuming that bar.c
isn't a directory):
rsync -ai src/foo.c save/bar.c
The single-item copy rule might accidentally bite you if you unknowingly copy a single
item and specify a destination dir that doesn't exist (without using a trailing slash).
For example, if src/*.c matches one file and save/dir doesn't exist, this will confuse you
by naming the destination file save/dir:
rsync -ai src/*.c save/dir
To prevent such an accident, either make sure the destination dir exists or specify the
destination path with a trailing slash:
rsync -ai src/*.c save/dir/
SORTED TRANSFER ORDER
Rsync always sorts the specified filenames into its internal transfer list. This handles
the merging together of the contents of identically named directories, makes it easy to
remove duplicate filenames. It can, however, confuse someone when the files are
transferred in a different order than what was given on the command-line.
If you need a particular file to be transferred prior to another, either separate the
files into different rsync calls, or consider using --delay-updates (which doesn't affect
the sorted transfer order, but does make the final file-updating phase happen much more
rapidly).
MULTI-HOST SECURITY
Rsync takes steps to ensure that the file requests that are shared in a transfer are
protected against various security issues. Most of the potential problems arise on the
receiving side where rsync takes steps to ensure that the list of files being transferred
remains within the bounds of what was requested.
Toward this end, rsync 3.1.2 and later have aborted when a file list contains an absolute
or relative path that tries to escape out of the top of the transfer. Also, beginning
with version 3.2.5, rsync does two more safety checks of the file list to (1) ensure that
no extra source arguments were added into the transfer other than those that the client
requested and (2) ensure that the file list obeys the exclude rules that were sent to the
sender.
For those that don't yet have a 3.2.5 client rsync (or those that want to be extra
careful), it is safest to do a copy into a dedicated destination directory for the remote
files when you don't trust the remote host. For example, instead of doing an rsync copy
into your home directory:
rsync -aiv host1:dir1 ~
Dedicate a "host1-files" dir to the remote content:
rsync -aiv host1:dir1 ~/host1-files
See the --trust-sender option for additional details.
CAUTION: it is not particularly safe to use rsync to copy files from a case-preserving
filesystem to a case-ignoring filesystem. If you must perform such a copy, you should
either disable symlinks via --no-links or enable the munging of symlinks via --munge-links
(and make sure you use the right local or remote option). This will prevent rsync from
doing potentially dangerous things if a symlink name overlaps with a file or directory. It
does not, however, ensure that you get a full copy of all the files (since that may not be
possible when the names overlap). A potentially better solution is to list all the source
files and create a safe list of filenames that you pass to the --files-from option. Any
files that conflict in name would need to be copied to different destination directories
using more than one copy.
While a copy of a case-ignoring filesystem to a case-ignoring filesystem can work out
fairly well, if no --delete-during or --delete-before option is active, rsync can
potentially update an existing file on the receiveing side without noticing that the
upper-/lower-case of the filename should be changed to match the sender.
ADVANCED USAGE
The syntax for requesting multiple files from a remote host is done by specifying
additional remote-host args in the same style as the first, or with the hostname omitted.
For instance, all these work:
rsync -aiv host:file1 :file2 host:file{3,4} /dest/
rsync -aiv host::modname/file{1,2} host::modname/extra /dest/
rsync -aiv host::modname/first ::extra-file{1,2} /dest/
Note that a daemon connection only supports accessing one module per copy command, so if
the start of a follow-up path doesn't begin with the modname of the first path, it is
assumed to be a path in the module (such as the extra-file1 & extra-file2 that are grabbed
above).
Really old versions of rsync (2.6.9 and before) only allowed specifying one remote-source
arg, so some people have instead relied on the remote-shell performing space splitting to
break up an arg into multiple paths. Such unintuitive behavior is no longer supported by
default (though you can request it, as described below).
Starting in 3.2.4, filenames are passed to a remote shell in such a way as to preserve the
characters you give it. Thus, if you ask for a file with spaces in the name, that's what
the remote rsync looks for:
rsync -aiv host:'a simple file.pdf' /dest/
If you use scripts that have been written to manually apply extra quoting to the remote
rsync args (or to require remote arg splitting), you can ask rsync to let your script
handle the extra escaping. This is done by either adding the --old-args option to the
rsync runs in the script (which requires a new rsync) or exporting RSYNC_OLD_ARGS=1 and
RSYNC_PROTECT_ARGS=0 (which works with old or new rsync versions).
CONNECTING TO AN RSYNC DAEMON
It is also possible to use rsync without a remote shell as the transport. In this case
you will directly connect to a remote rsync daemon, typically using TCP port 873. (This
obviously requires the daemon to be running on the remote system, so refer to the STARTING
AN RSYNC DAEMON TO ACCEPT CONNECTIONS section below for information on that.)
Using rsync in this way is the same as using it with a remote shell except that:
o Use either double-colon syntax or rsync:// URL syntax instead of the single-colon
(remote shell) syntax.
o The first element of the "path" is actually a module name.
o Additional remote source args can use an abbreviated syntax that omits the hostname
and/or the module name, as discussed in ADVANCED USAGE.
o The remote daemon may print a "message of the day" when you connect.
o If you specify only the host (with no module or path) then a list of accessible
modules on the daemon is output.
o If you specify a remote source path but no destination, a listing of the matching
files on the remote daemon is output.
o The --rsh (-e) option must be omitted to avoid changing the connection style from
using a socket connection to USING RSYNC-DAEMON FEATURES VIA A REMOTE-SHELL
CONNECTION.
An example that copies all the files in a remote module named "src":
rsync -av host::src /dest
Some modules on the remote daemon may require authentication. If so, you will receive a
password prompt when you connect. You can avoid the password prompt by setting the
environment variable RSYNC_PASSWORD to the password you want to use or using the
--password-file option. This may be useful when scripting rsync.
WARNING: On some systems environment variables are visible to all users. On those systems
using --password-file is recommended.
You may establish the connection via a web proxy by setting the environment variable
RSYNC_PROXY to a hostname:port pair pointing to your web proxy. Note that your web
proxy's configuration must support proxy connections to port 873.
You may also establish a daemon connection using a program as a proxy by setting the
environment variable RSYNC_CONNECT_PROG to the commands you wish to run in place of making
a direct socket connection. The string may contain the escape "%H" to represent the
hostname specified in the rsync command (so use "%%" if you need a single "%" in your
string). For example:
export RSYNC_CONNECT_PROG='ssh proxyhost nc %H 873'
rsync -av targethost1::module/src/ /dest/
rsync -av rsync://targethost2/module/src/ /dest/
The command specified above uses ssh to run nc (netcat) on a proxyhost, which forwards all
data to port 873 (the rsync daemon) on the targethost (%H).
Note also that if the RSYNC_SHELL environment variable is set, that program will be used
to run the RSYNC_CONNECT_PROG command instead of using the default shell of the system()
call.
USING RSYNC-DAEMON FEATURES VIA A REMOTE-SHELL CONNECTION
It is sometimes useful to use various features of an rsync daemon (such as named modules)
without actually allowing any new socket connections into a system (other than what is
already required to allow remote-shell access). Rsync supports connecting to a host using
a remote shell and then spawning a single-use "daemon" server that expects to read its
config file in the home dir of the remote user. This can be useful if you want to encrypt
a daemon-style transfer's data, but since the daemon is started up fresh by the remote
user, you may not be able to use features such as chroot or change the uid used by the
daemon. (For another way to encrypt a daemon transfer, consider using ssh to tunnel a
local port to a remote machine and configure a normal rsync daemon on that remote host to
only allow connections from "localhost".)
From the user's perspective, a daemon transfer via a remote-shell connection uses nearly
the same command-line syntax as a normal rsync-daemon transfer, with the only exception
being that you must explicitly set the remote shell program on the command-line with the
--rsh=COMMAND option. (Setting the RSYNC_RSH in the environment will not turn on this
functionality.) For example:
rsync -av --rsh=ssh host::module /dest
If you need to specify a different remote-shell user, keep in mind that the user@ prefix
in front of the host is specifying the rsync-user value (for a module that requires user-
based authentication). This means that you must give the '-l user' option to ssh when
specifying the remote-shell, as in this example that uses the short version of the --rsh
option:
rsync -av -e "ssh -l ssh-user" rsync-user@host::module /dest
The "ssh-user" will be used at the ssh level; the "rsync-user" will be used to log-in to
the "module".
In this setup, the daemon is started by the ssh command that is accessing the system
(which can be forced via the ~/.ssh/authorized_keys file, if desired). However, when
accessing a daemon directly, it needs to be started beforehand.
STARTING AN RSYNC DAEMON TO ACCEPT CONNECTIONS
In order to connect to an rsync daemon, the remote system needs to have a daemon already
running (or it needs to have configured something like inetd to spawn an rsync daemon for
incoming connections on a particular port). For full information on how to start a daemon
that will handling incoming socket connections, see the rsyncd.conf(5) manpage -- that is
the config file for the daemon, and it contains the full details for how to run the daemon
(including stand-alone and inetd configurations).
If you're using one of the remote-shell transports for the transfer, there is no need to
manually start an rsync daemon.
EXAMPLES
Here are some examples of how rsync can be used.
To backup a home directory, which consists of large MS Word files and mail folders, a per-
user cron job can be used that runs this each day:
rsync -aiz . bkhost:backup/joe/
To move some files from a remote host to the local host, you could run:
rsync -aiv --remove-source-files rhost:/tmp/{file1,file2}.c ~/src/
OPTION SUMMARY
Here is a short summary of the options available in rsync. Each option also has its own
detailed description later in this manpage.
--verbose, -v increase verbosity
--info=FLAGS fine-grained informational verbosity
--debug=FLAGS fine-grained debug verbosity
--stderr=e|a|c change stderr output mode (default: errors)
--quiet, -q suppress non-error messages
--no-motd suppress daemon-mode MOTD
--checksum, -c skip based on checksum, not mod-time & size
--archive, -a archive mode is -rlptgoD (no -A,-X,-U,-N,-H)
--no-OPTION turn off an implied OPTION (e.g. --no-D)
--recursive, -r recurse into directories
--relative, -R use relative path names
--no-implied-dirs don't send implied dirs with --relative
--backup, -b make backups (see --suffix & --backup-dir)
--backup-dir=DIR make backups into hierarchy based in DIR
--suffix=SUFFIX backup suffix (default ~ w/o --backup-dir)
--update, -u skip files that are newer on the receiver
--inplace update destination files in-place
--append append data onto shorter files
--append-verify --append w/old data in file checksum
--dirs, -d transfer directories without recursing
--old-dirs, --old-d works like --dirs when talking to old rsync
--mkpath create destination's missing path components
--links, -l copy symlinks as symlinks
--copy-links, -L transform symlink into referent file/dir
--copy-unsafe-links only "unsafe" symlinks are transformed
--safe-links ignore symlinks that point outside the tree
--munge-links munge symlinks to make them safe & unusable
--copy-dirlinks, -k transform symlink to dir into referent dir
--keep-dirlinks, -K treat symlinked dir on receiver as dir
--hard-links, -H preserve hard links
--perms, -p preserve permissions
--executability, -E preserve executability
--chmod=CHMOD affect file and/or directory permissions
--acls, -A preserve ACLs (implies --perms)
--xattrs, -X preserve extended attributes
--owner, -o preserve owner (super-user only)
--group, -g preserve group
--devices preserve device files (super-user only)
--copy-devices copy device contents as a regular file
--write-devices write to devices as files (implies --inplace)
--specials preserve special files
-D same as --devices --specials
--times, -t preserve modification times
--atimes, -U preserve access (use) times
--open-noatime avoid changing the atime on opened files
--crtimes, -N preserve create times (newness)
--omit-dir-times, -O omit directories from --times
--omit-link-times, -J omit symlinks from --times
--super receiver attempts super-user activities
--fake-super store/recover privileged attrs using xattrs
--sparse, -S turn sequences of nulls into sparse blocks
--preallocate allocate dest files before writing them
--dry-run, -n perform a trial run with no changes made
--whole-file, -W copy files whole (w/o delta-xfer algorithm)
--checksum-choice=STR choose the checksum algorithm (aka --cc)
--one-file-system, -x don't cross filesystem boundaries
--block-size=SIZE, -B force a fixed checksum block-size
--rsh=COMMAND, -e specify the remote shell to use
--rsync-path=PROGRAM specify the rsync to run on remote machine
--existing skip creating new files on receiver
--ignore-existing skip updating files that exist on receiver
--remove-source-files sender removes synchronized files (non-dir)
--del an alias for --delete-during
--delete delete extraneous files from dest dirs
--delete-before receiver deletes before xfer, not during
--delete-during receiver deletes during the transfer
--delete-delay find deletions during, delete after
--delete-after receiver deletes after transfer, not during
--delete-excluded also delete excluded files from dest dirs
--ignore-missing-args ignore missing source args without error
--delete-missing-args delete missing source args from destination
--ignore-errors delete even if there are I/O errors
--force force deletion of dirs even if not empty
--max-delete=NUM don't delete more than NUM files
--max-size=SIZE don't transfer any file larger than SIZE
--min-size=SIZE don't transfer any file smaller than SIZE
--max-alloc=SIZE change a limit relating to memory alloc
--partial keep partially transferred files
--partial-dir=DIR put a partially transferred file into DIR
--delay-updates put all updated files into place at end
--prune-empty-dirs, -m prune empty directory chains from file-list
--numeric-ids don't map uid/gid values by user/group name
--usermap=STRING custom username mapping
--groupmap=STRING custom groupname mapping
--chown=USER:GROUP simple username/groupname mapping
--timeout=SECONDS set I/O timeout in seconds
--contimeout=SECONDS set daemon connection timeout in seconds
--ignore-times, -I don't skip files that match size and time
--size-only skip files that match in size
--modify-window=NUM, -@ set the accuracy for mod-time comparisons
--temp-dir=DIR, -T create temporary files in directory DIR
--fuzzy, -y find similar file for basis if no dest file
--compare-dest=DIR also compare destination files relative to DIR
--copy-dest=DIR ... and include copies of unchanged files
--link-dest=DIR hardlink to files in DIR when unchanged
--compress, -z compress file data during the transfer
--compress-choice=STR choose the compression algorithm (aka --zc)
--compress-level=NUM explicitly set compression level (aka --zl)
--skip-compress=LIST skip compressing files with suffix in LIST
--cvs-exclude, -C auto-ignore files in the same way CVS does
--filter=RULE, -f add a file-filtering RULE
-F same as --filter='dir-merge /.rsync-filter'
repeated: --filter='- .rsync-filter'
--exclude=PATTERN exclude files matching PATTERN
--exclude-from=FILE read exclude patterns from FILE
--include=PATTERN don't exclude files matching PATTERN
--include-from=FILE read include patterns from FILE
--files-from=FILE read list of source-file names from FILE
--from0, -0 all *-from/filter files are delimited by 0s
--old-args disable the modern arg-protection idiom
--secluded-args, -s use the protocol to safely send the args
--trust-sender trust the remote sender's file list
--copy-as=USER[:GROUP] specify user & optional group for the copy
--address=ADDRESS bind address for outgoing socket to daemon
--port=PORT specify double-colon alternate port number
--sockopts=OPTIONS specify custom TCP options
--blocking-io use blocking I/O for the remote shell
--outbuf=N|L|B set out buffering to None, Line, or Block
--stats give some file-transfer stats
--8-bit-output, -8 leave high-bit chars unescaped in output
--human-readable, -h output numbers in a human-readable format
--progress show progress during transfer
-P same as --partial --progress
--itemize-changes, -i output a change-summary for all updates
--remote-option=OPT, -M send OPTION to the remote side only
--out-format=FORMAT output updates using the specified FORMAT
--log-file=FILE log what we're doing to the specified FILE
--log-file-format=FMT log updates using the specified FMT
--password-file=FILE read daemon-access password from FILE
--early-input=FILE use FILE for daemon's early exec input
--list-only list the files instead of copying them
--bwlimit=RATE limit socket I/O bandwidth
--stop-after=MINS Stop rsync after MINS minutes have elapsed
--stop-at=y-m-dTh:m Stop rsync at the specified point in time
--fsync fsync every written file
--write-batch=FILE write a batched update to FILE
--only-write-batch=FILE like --write-batch but w/o updating dest
--read-batch=FILE read a batched update from FILE
--protocol=NUM force an older protocol version to be used
--iconv=CONVERT_SPEC request charset conversion of filenames
--checksum-seed=NUM set block/file checksum seed (advanced)
--ipv4, -4 prefer IPv4
--ipv6, -6 prefer IPv6
--version, -V print the version + other info and exit
--help, -h (*) show this help (* -h is help only on its own)
Rsync can also be run as a daemon, in which case the following options are accepted:
--daemon run as an rsync daemon
--address=ADDRESS bind to the specified address
--bwlimit=RATE limit socket I/O bandwidth
--config=FILE specify alternate rsyncd.conf file
--dparam=OVERRIDE, -M override global daemon config parameter
--no-detach do not detach from the parent
--port=PORT listen on alternate port number
--log-file=FILE override the "log file" setting
--log-file-format=FMT override the "log format" setting
--sockopts=OPTIONS specify custom TCP options
--verbose, -v increase verbosity
--ipv4, -4 prefer IPv4
--ipv6, -6 prefer IPv6
--help, -h show this help (when used with --daemon)
OPTIONS
Rsync accepts both long (double-dash + word) and short (single-dash + letter) options.
The full list of the available options are described below. If an option can be specified
in more than one way, the choices are comma-separated. Some options only have a long
variant, not a short.
If the option takes a parameter, the parameter is only listed after the long variant, even
though it must also be specified for the short. When specifying a parameter, you can
either use the form --option=param, --option param, -o=param, -o param, or -oparam (the
latter choices assume that your option has a short variant).
The parameter may need to be quoted in some manner for it to survive the shell's command-
line parsing. Also keep in mind that a leading tilde (~) in a pathname is substituted by
your shell, so make sure that you separate the option name from the pathname using a space
if you want the local shell to expand it.
--help Print a short help page describing the options available in rsync and exit. You
can also use -h for --help when it is used without any other options (since it
normally means --human-readable).
--version, -V
Print the rsync version plus other info and exit. When repeated, the information
is output is a JSON format that is still fairly readable (client side only).
The output includes a list of compiled-in capabilities, a list of optimizations,
the default list of checksum algorithms, the default list of compression
algorithms, the default list of daemon auth digests, a link to the rsync web site,
and a few other items.
--verbose, -v
This option increases the amount of information you are given during the transfer.
By default, rsync works silently. A single -v will give you information about what
files are being transferred and a brief summary at the end. Two -v options will
give you information on what files are being skipped and slightly more information
at the end. More than two -v options should only be used if you are debugging
rsync.
The end-of-run summary tells you the number of bytes sent to the remote rsync
(which is the receiving side on a local copy), the number of bytes received from
the remote host, and the average bytes per second of the transferred data computed
over the entire length of the rsync run. The second line shows the total size (in
bytes), which is the sum of all the file sizes that rsync considered transferring.
It also shows a "speedup" value, which is a ratio of the total file size divided by
the sum of the sent and received bytes (which is really just a feel-good bigger-is-
better number). Note that these byte values can be made more (or less) human-
readable by using the --human-readable (or --no-human-readable) options.
In a modern rsync, the -v option is equivalent to the setting of groups of --info
and --debug options. You can choose to use these newer options in addition to, or
in place of using --verbose, as any fine-grained settings override the implied
settings of -v. Both --info and --debug have a way to ask for help that tells you
exactly what flags are set for each increase in verbosity.
However, do keep in mind that a daemon's "max verbosity" setting will limit how
high of a level the various individual flags can be set on the daemon side. For
instance, if the max is 2, then any info and/or debug flag that is set to a higher
value than what would be set by -vv will be downgraded to the -vv level in the
daemon's logging.
--info=FLAGS
This option lets you have fine-grained control over the information output you want
to see. An individual flag name may be followed by a level number, with 0 meaning
to silence that output, 1 being the default output level, and higher numbers
increasing the output of that flag (for those that support higher levels). Use
--info=help to see all the available flag names, what they output, and what flag
names are added for each increase in the verbose level. Some examples:
rsync -a --info=progress2 src/ dest/
rsync -avv --info=stats2,misc1,flist0 src/ dest/
Note that --info=name's output is affected by the --out-format and --itemize-
changes (-i) options. See those options for more information on what is output and
when.
This option was added to 3.1.0, so an older rsync on the server side might reject
your attempts at fine-grained control (if one or more flags needed to be send to
the server and the server was too old to understand them). See also the
"max verbosity" caveat above when dealing with a daemon.
--debug=FLAGS
This option lets you have fine-grained control over the debug output you want to
see. An individual flag name may be followed by a level number, with 0 meaning to
silence that output, 1 being the default output level, and higher numbers
increasing the output of that flag (for those that support higher levels). Use
--debug=help to see all the available flag names, what they output, and what flag
names are added for each increase in the verbose level. Some examples:
rsync -avvv --debug=none src/ dest/
rsync -avA --del --debug=del2,acl src/ dest/
Note that some debug messages will only be output when the --stderr=all option is
specified, especially those pertaining to I/O and buffer debugging.
Beginning in 3.2.0, this option is no longer auto-forwarded to the server side in
order to allow you to specify different debug values for each side of the transfer,
as well as to specify a new debug option that is only present in one of the rsync
versions. If you want to duplicate the same option on both sides, using brace
expansion is an easy way to save you some typing. This works in zsh and bash:
rsync -aiv {-M,}--debug=del2 src/ dest/
--stderr=errors|all|client
This option controls which processes output to stderr and if info messages are also
changed to stderr. The mode strings can be abbreviated, so feel free to use a
single letter value. The 3 possible choices are:
o errors - (the default) causes all the rsync processes to send an error
directly to stderr, even if the process is on the remote side of the
transfer. Info messages are sent to the client side via the protocol
stream. If stderr is not available (i.e. when directly connecting with a
daemon via a socket) errors fall back to being sent via the protocol stream.
o all - causes all rsync messages (info and error) to get written directly to
stderr from all (possible) processes. This causes stderr to become line-
buffered (instead of raw) and eliminates the ability to divide up the info
and error messages by file handle. For those doing debugging or using
several levels of verbosity, this option can help to avoid clogging up the
transfer stream (which should prevent any chance of a deadlock bug hanging
things up). It also allows --debug to enable some extra I/O related
messages.
o client - causes all rsync messages to be sent to the client side via the
protocol stream. One client process outputs all messages, with errors on
stderr and info messages on stdout. This was the default in older rsync
versions, but can cause error delays when a lot of transfer data is ahead of
the messages. If you're pushing files to an older rsync, you may want to
use --stderr=all since that idiom has been around for several releases.
This option was added in rsync 3.2.3. This version also began the forwarding of a
non-default setting to the remote side, though rsync uses the backward-compatible
options --msgs2stderr and --no-msgs2stderr to represent the all and client
settings, respectively. A newer rsync will continue to accept these older option
names to maintain compatibility.
--quiet, -q
This option decreases the amount of information you are given during the transfer,
notably suppressing information messages from the remote server. This option is
useful when invoking rsync from cron.
--no-motd
This option affects the information that is output by the client at the start of a
daemon transfer. This suppresses the message-of-the-day (MOTD) text, but it also
affects the list of modules that the daemon sends in response to the "rsync host::"
request (due to a limitation in the rsync protocol), so omit this option if you
want to request the list of modules from the daemon.
--ignore-times, -I
Normally rsync will skip any files that are already the same size and have the same
modification timestamp. This option turns off this "quick check" behavior, causing
all files to be updated.
This option can be confusing compared to --ignore-existing and --ignore-non-
existing in that that they cause rsync to transfer fewer files, while this option
causes rsync to transfer more files.
--size-only
This modifies rsync's "quick check" algorithm for finding files that need to be
transferred, changing it from the default of transferring files with either a
changed size or a changed last-modified time to just looking for files that have
changed in size. This is useful when starting to use rsync after using another
mirroring system which may not preserve timestamps exactly.
--modify-window=NUM, -@
When comparing two timestamps, rsync treats the timestamps as being equal if they
differ by no more than the modify-window value. The default is 0, which matches
just integer seconds. If you specify a negative value (and the receiver is at
least version 3.1.3) then nanoseconds will also be taken into account. Specifying
1 is useful for copies to/from MS Windows FAT filesystems, because FAT represents
times with a 2-second resolution (allowing times to differ from the original by up
to 1 second).
If you want all your transfers to default to comparing nanoseconds, you can create
a ~/.popt file and put these lines in it:
rsync alias -a -a@-1
rsync alias -t -t@-1
With that as the default, you'd need to specify --modify-window=0 (aka -@0) to
override it and ignore nanoseconds, e.g. if you're copying between ext3 and ext4,
or if the receiving rsync is older than 3.1.3.
--checksum, -c
This changes the way rsync checks if the files have been changed and are in need of
a transfer. Without this option, rsync uses a "quick check" that (by default)
checks if each file's size and time of last modification match between the sender
and receiver. This option changes this to compare a 128-bit checksum for each file
that has a matching size. Generating the checksums means that both sides will
expend a lot of disk I/O reading all the data in the files in the transfer, so this
can slow things down significantly (and this is prior to any reading that will be
done to transfer changed files)
The sending side generates its checksums while it is doing the file-system scan
that builds the list of the available files. The receiver generates its checksums
when it is scanning for changed files, and will checksum any file that has the same
size as the corresponding sender's file: files with either a changed size or a
changed checksum are selected for transfer.
Note that rsync always verifies that each transferred file was correctly
reconstructed on the receiving side by checking a whole-file checksum that is
generated as the file is transferred, but that automatic after-the-transfer
verification has nothing to do with this option's before-the-transfer "Does this
file need to be updated?" check.
The checksum used is auto-negotiated between the client and the server, but can be
overridden using either the --checksum-choice (--cc) option or an environment
variable that is discussed in that option's section.
--archive, -a
This is equivalent to -rlptgoD. It is a quick way of saying you want recursion and
want to preserve almost everything. Be aware that it does not include preserving
ACLs (-A), xattrs (-X), atimes (-U), crtimes (-N), nor the finding and preserving
of hardlinks (-H).
The only exception to the above equivalence is when --files-from is specified, in
which case -r is not implied.
--no-OPTION
You may turn off one or more implied options by prefixing the option name with
"no-". Not all positive options have a negated opposite, but a lot do, including
those that can be used to disable an implied option (e.g. --no-D, --no-perms) or
have different defaults in various circumstances (e.g. --no-whole-file, --no-
blocking-io, --no-dirs). Every valid negated option accepts both the short and the
long option name after the "no-" prefix (e.g. --no-R is the same as --no-relative).
As an example, if you want to use --archive (-a) but don't want --owner (-o),
instead of converting -a into -rlptgD, you can specify -a --no-o (aka
--archive --no-owner).
The order of the options is important: if you specify --no-r -a, the -r option
would end up being turned on, the opposite of -a --no-r. Note also that the side-
effects of the --files-from option are NOT positional, as it affects the default
state of several options and slightly changes the meaning of -a (see the --files-
from option for more details).
--recursive, -r
This tells rsync to copy directories recursively. See also --dirs (-d) for an
option that allows the scanning of a single directory.
See the --inc-recursive option for a discussion of the incremental recursion for
creating the list of files to transfer.
--inc-recursive, --i-r
This option explicitly enables on incremental recursion when scanning for files,
which is enabled by default when using the --recursive option and both sides of the
transfer are running rsync 3.0.0 or newer.
Incremental recursion uses much less memory than non-incremental, while also
beginning the transfer more quickly (since it doesn't need to scan the entire
transfer hierarchy before it starts transferring files). If no recursion is
enabled in the source files, this option has no effect.
Some options require rsync to know the full file list, so these options disable the
incremental recursion mode. These include:
o --delete-before (the old default of --delete)
o --delete-after
o --prune-empty-dirs
o --delay-updates
In order to make --delete compatible with incremental recursion, rsync 3.0.0 made
--delete-during the default delete mode (which was first added in 2.6.4).
One side-effect of incremental recursion is that any missing sub-directories inside
a recursively-scanned directory are (by default) created prior to recursing into
the sub-dirs. This earlier creation point (compared to a non-incremental
recursion) allows rsync to then set the modify time of the finished directory right
away (without having to delay that until a bunch of recursive copying has
finished). However, these early directories don't yet have their completed mode,
mtime, or ownership set -- they have more restrictive rights until the
subdirectory's copying actually begins. This early-creation idiom can be avoided
by using the --omit-dir-times option.
Incremental recursion can be disabled using the --no-inc-recursive (--no-i-r)
option.
--no-inc-recursive, --no-i-r
Disables the new incremental recursion algorithm of the --recursive option. This
makes rsync scan the full file list before it begins to transfer files. See --inc-
recursive for more info.
--relative, -R
Use relative paths. This means that the full path names specified on the command
line are sent to the server rather than just the last parts of the filenames. This
is particularly useful when you want to send several different directories at the
same time. For example, if you used this command:
rsync -av /foo/bar/baz.c remote:/tmp/
would create a file named baz.c in /tmp/ on the remote machine. If instead you
used
rsync -avR /foo/bar/baz.c remote:/tmp/
then a file named /tmp/foo/bar/baz.c would be created on the remote machine,
preserving its full path. These extra path elements are called "implied
directories" (i.e. the "foo" and the "foo/bar" directories in the above example).
Beginning with rsync 3.0.0, rsync always sends these implied directories as real
directories in the file list, even if a path element is really a symlink on the
sending side. This prevents some really unexpected behaviors when copying the full
path of a file that you didn't realize had a symlink in its path. If you want to
duplicate a server-side symlink, include both the symlink via its path, and
referent directory via its real path. If you're dealing with an older rsync on the
sending side, you may need to use the --no-implied-dirs option.
It is also possible to limit the amount of path information that is sent as implied
directories for each path you specify. With a modern rsync on the sending side
(beginning with 2.6.7), you can insert a dot and a slash into the source path, like
this:
rsync -avR /foo/./bar/baz.c remote:/tmp/
That would create /tmp/bar/baz.c on the remote machine. (Note that the dot must be
followed by a slash, so "/foo/." would not be abbreviated.) For older rsync
versions, you would need to use a chdir to limit the source path. For example,
when pushing files:
(cd /foo; rsync -avR bar/baz.c remote:/tmp/)
(Note that the parens put the two commands into a sub-shell, so that the "cd"
command doesn't remain in effect for future commands.) If you're pulling files from
an older rsync, use this idiom (but only for a non-daemon transfer):
rsync -avR --rsync-path="cd /foo; rsync" \
remote:bar/baz.c /tmp/
--no-implied-dirs
This option affects the default behavior of the --relative option. When it is
specified, the attributes of the implied directories from the source names are not
included in the transfer. This means that the corresponding path elements on the
destination system are left unchanged if they exist, and any missing implied
directories are created with default attributes. This even allows these implied
path elements to have big differences, such as being a symlink to a directory on
the receiving side.
For instance, if a command-line arg or a files-from entry told rsync to transfer
the file "path/foo/file", the directories "path" and "path/foo" are implied when
--relative is used. If "path/foo" is a symlink to "bar" on the destination system,
the receiving rsync would ordinarily delete "path/foo", recreate it as a directory,
and receive the file into the new directory. With --no-implied-dirs, the receiving
rsync updates "path/foo/file" using the existing path elements, which means that
the file ends up being created in "path/bar". Another way to accomplish this link
preservation is to use the --keep-dirlinks option (which will also affect symlinks
to directories in the rest of the transfer).
When pulling files from an rsync older than 3.0.0, you may need to use this option
if the sending side has a symlink in the path you request and you wish the implied
directories to be transferred as normal directories.
--backup, -b
With this option, preexisting destination files are renamed as each file is
transferred or deleted. You can control where the backup file goes and what (if
any) suffix gets appended using the --backup-dir and --suffix options.
If you don't specify --backup-dir:
1. the --omit-dir-times option will be forced on
2. the use of --delete (without --delete-excluded), causes rsync to add a
"protect" filter-rule for the backup suffix to the end of all your existing
filters that looks like this: -f "P *~". This rule prevents previously
backed-up files from being deleted.
Note that if you are supplying your own filter rules, you may need to manually
insert your own exclude/protect rule somewhere higher up in the list so that it has
a high enough priority to be effective (e.g. if your rules specify a trailing
inclusion/exclusion of *, the auto-added rule would never be reached).
--backup-dir=DIR
This implies the --backup option, and tells rsync to store all backups in the
specified directory on the receiving side. This can be used for incremental
backups. You can additionally specify a backup suffix using the --suffix option
(otherwise the files backed up in the specified directory will keep their original
filenames).
Note that if you specify a relative path, the backup directory will be relative to
the destination directory, so you probably want to specify either an absolute path
or a path that starts with "../". If an rsync daemon is the receiver, the backup
dir cannot go outside the module's path hierarchy, so take extra care not to delete
it or copy into it.
--suffix=SUFFIX
This option allows you to override the default backup suffix used with the --backup
(-b) option. The default suffix is a ~ if no --backup-dir was specified, otherwise
it is an empty string.
--update, -u
This forces rsync to skip any files which exist on the destination and have a
modified time that is newer than the source file. (If an existing destination file
has a modification time equal to the source file's, it will be updated if the sizes
are different.)
Note that this does not affect the copying of dirs, symlinks, or other special
files. Also, a difference of file format between the sender and receiver is always
considered to be important enough for an update, no matter what date is on the
objects. In other words, if the source has a directory where the destination has a
file, the transfer would occur regardless of the timestamps.
This option is a TRANSFER RULE, so don't expect any exclude side effects.
A caution for those that choose to combine --inplace with --update: an interrupted
transfer will leave behind a partial file on the receiving side that has a very
recent modified time, so re-running the transfer will probably not continue the
interrupted file. As such, it is usually best to avoid combining this with
--inplace unless you have implemented manual steps to handle any interrupted in-
progress files.
--inplace
This option changes how rsync transfers a file when its data needs to be updated:
instead of the default method of creating a new copy of the file and moving it into
place when it is complete, rsync instead writes the updated data directly to the
destination file.
This has several effects:
o Hard links are not broken. This means the new data will be visible through
other hard links to the destination file. Moreover, attempts to copy
differing source files onto a multiply-linked destination file will result
in a "tug of war" with the destination data changing back and forth.
o In-use binaries cannot be updated (either the OS will prevent this from
happening, or binaries that attempt to swap-in their data will misbehave or
crash).
o The file's data will be in an inconsistent state during the transfer and
will be left that way if the transfer is interrupted or if an update fails.
o A file that rsync cannot write to cannot be updated. While a super user can
update any file, a normal user needs to be granted write permission for the
open of the file for writing to be successful.
o The efficiency of rsync's delta-transfer algorithm may be reduced if some
data in the destination file is overwritten before it can be copied to a
position later in the file. This does not apply if you use --backup, since
rsync is smart enough to use the backup file as the basis file for the
transfer.
WARNING: you should not use this option to update files that are being accessed by
others, so be careful when choosing to use this for a copy.
This option is useful for transferring large files with block-based changes or
appended data, and also on systems that are disk bound, not network bound. It can
also help keep a copy-on-write filesystem snapshot from diverging the entire
contents of a file that only has minor changes.
The option implies --partial (since an interrupted transfer does not delete the
file), but conflicts with --partial-dir and --delay-updates. Prior to rsync 2.6.4
--inplace was also incompatible with --compare-dest and --link-dest.
--append
This special copy mode only works to efficiently update files that are known to be
growing larger where any existing content on the receiving side is also known to be
the same as the content on the sender. The use of --append can be dangerous if you
aren't 100% sure that all the files in the transfer are shared, growing files. You
should thus use filter rules to ensure that you weed out any files that do not fit
this criteria.
Rsync updates these growing file in-place without verifying any of the existing
content in the file (it only verifies the content that it is appending). Rsync
skips any files that exist on the receiving side that are not shorter than the
associated file on the sending side (which means that new files are transferred).
It also skips any files whose size on the sending side gets shorter during the send
negotiations (rsync warns about a "diminished" file when this happens).
This does not interfere with the updating of a file's non-content attributes (e.g.
permissions, ownership, etc.) when the file does not need to be transferred, nor
does it affect the updating of any directories or non-regular files.
--append-verify
This special copy mode works like --append except that all the data in the file is
included in the checksum verification (making it less efficient but also
potentially safer). This option can be dangerous if you aren't 100% sure that all
the files in the transfer are shared, growing files. See the --append option for
more details.
Note: prior to rsync 3.0.0, the --append option worked like --append-verify, so if
you are interacting with an older rsync (or the transfer is using a protocol prior
to 30), specifying either append option will initiate an --append-verify transfer.
--dirs, -d
Tell the sending side to include any directories that are encountered. Unlike
--recursive, a directory's contents are not copied unless the directory name
specified is "." or ends with a trailing slash (e.g. ".", "dir/.", "dir/", etc.).
Without this option or the --recursive option, rsync will skip all directories it
encounters (and output a message to that effect for each one). If you specify both
--dirs and --recursive, --recursive takes precedence.
The --dirs option is implied by the --files-from option or the --list-only option
(including an implied --list-only usage) if --recursive wasn't specified (so that
directories are seen in the listing). Specify --no-dirs (or --no-d) if you want to
turn this off.
There is also a backward-compatibility helper option, --old-dirs (--old-d) that
tells rsync to use a hack of -r --exclude='/*/*' to get an older rsync to list a
single directory without recursing.
--mkpath
Create all missing path components of the destination path.
By default, rsync allows only the final component of the destination path to not
exist, which is an attempt to help you to validate your destination path. With
this option, rsync creates all the missing destination-path components, just as if
mkdir -p $DEST_PATH had been run on the receiving side.
When specifying a destination path, including a trailing slash ensures that the
whole path is treated as directory names to be created, even when the file list has
a single item. See the COPYING TO A DIFFERENT NAME section for full details on how
rsync decides if a final destination-path component should be created as a
directory or not.
If you would like the newly-created destination dirs to match the dirs on the
sending side, you should be using --relative (-R) instead of --mkpath. For
instance, the following two commands result in the same destination tree, but only
the second command ensures that the "some/extra/path" components match the dirs on
the sending side:
rsync -ai --mkpath host:some/extra/path/*.c some/extra/path/
rsync -aiR host:some/extra/path/*.c ./
--links, -l
Add symlinks to the transferred files instead of noisily ignoring them with a "non-
regular file" warning for each symlink encountered. You can alternately silence
the warning by specifying --info=nonreg0.
The default handling of symlinks is to recreate each symlink's unchanged value on
the receiving side.
See the SYMBOLIC LINKS section for multi-option info.
--copy-links, -L
The sender transforms each symlink encountered in the transfer into the referent
item, following the symlink chain to the file or directory that it references. If
a symlink chain is broken, an error is output and the file is dropped from the
transfer.
This option supersedes any other options that affect symlinks in the transfer,
since there are no symlinks left in the transfer.
This option does not change the handling of existing symlinks on the receiving
side, unlike versions of rsync prior to 2.6.3 which had the side-effect of telling
the receiving side to also follow symlinks. A modern rsync won't forward this
option to a remote receiver (since only the sender needs to know about it), so this
caveat should only affect someone using an rsync client older than 2.6.7 (which is
when -L stopped being forwarded to the receiver).
See the --keep-dirlinks (-K) if you need a symlink to a directory to be treated as
a real directory on the receiving side.
See the SYMBOLIC LINKS section for multi-option info.
--copy-unsafe-links
This tells rsync to copy the referent of symbolic links that point outside the
copied tree. Absolute symlinks are also treated like ordinary files, and so are
any symlinks in the source path itself when --relative is used.
Note that the cut-off point is the top of the transfer, which is the part of the
path that rsync isn't mentioning in the verbose output. If you copy "/src/subdir"
to "/dest/" then the "subdir" directory is a name inside the transfer tree, not the
top of the transfer (which is /src) so it is legal for created relative symlinks to
refer to other names inside the /src and /dest directories. If you instead copy
"/src/subdir/" (with a trailing slash) to "/dest/subdir" that would not allow
symlinks to any files outside of "subdir".
Note that safe symlinks are only copied if --links was also specified or implied.
The --copy-unsafe-links option has no extra effect when combined with --copy-links.
See the SYMBOLIC LINKS section for multi-option info.
--safe-links
This tells the receiving rsync to ignore any symbolic links in the transfer which
point outside the copied tree. All absolute symlinks are also ignored.
Since this ignoring is happening on the receiving side, it will still be effective
even when the sending side has munged symlinks (when it is using --munge-links). It
also affects deletions, since the file being present in the transfer prevents any
matching file on the receiver from being deleted when the symlink is deemed to be
unsafe and is skipped.
This option must be combined with --links (or --archive) to have any symlinks in
the transfer to conditionally ignore. Its effect is superseded by --copy-unsafe-
links.
Using this option in conjunction with --relative may give unexpected results.
See the SYMBOLIC LINKS section for multi-option info.
--munge-links
This option affects just one side of the transfer and tells rsync to munge symlink
values when it is receiving files or unmunge symlink values when it is sending
files. The munged values make the symlinks unusable on disk but allows the
original contents of the symlinks to be recovered.
The server-side rsync often enables this option without the client's knowledge,
such as in an rsync daemon's configuration file or by an option given to the rrsync
(restricted rsync) script. When specified on the client side, specify the option
normally if it is the client side that has/needs the munged symlinks, or use
-M--munge-links to give the option to the server when it has/needs the munged
symlinks. Note that on a local transfer, the client is the sender, so specifying
the option directly unmunges symlinks while specifying it as a remote option munges
symlinks.
This option has no effect when sent to a daemon via --remote-option because the
daemon configures whether it wants munged symlinks via its "munge symlinks"
parameter.
The symlink value is munged/unmunged once it is in the transfer, so any option that
transforms symlinks into non-symlinks occurs prior to the munging/unmunging except
for --safe-links, which is a choice that the receiver makes, so it bases its
decision on the munged/unmunged value. This does mean that if a receiver has
munging enabled, that using --safe-links will cause all symlinks to be ignored
(since they are all absolute).
The method that rsync uses to munge the symlinks is to prefix each one's value with
the string "/rsyncd-munged/". This prevents the links from being used as long as
the directory does not exist. When this option is enabled, rsync will refuse to
run if that path is a directory or a symlink to a directory (though it only checks
at startup). See also the "munge-symlinks" python script in the support directory
of the source code for a way to munge/unmunge one or more symlinks in-place.
--copy-dirlinks, -k
This option causes the sending side to treat a symlink to a directory as though it
were a real directory. This is useful if you don't want symlinks to non-
directories to be affected, as they would be using --copy-links.
Without this option, if the sending side has replaced a directory with a symlink to
a directory, the receiving side will delete anything that is in the way of the new
symlink, including a directory hierarchy (as long as --force or --delete is in
effect).
See also --keep-dirlinks for an analogous option for the receiving side.
--copy-dirlinks applies to all symlinks to directories in the source. If you want
to follow only a few specified symlinks, a trick you can use is to pass them as
additional source args with a trailing slash, using --relative to make the paths
match up right. For example:
rsync -r --relative src/./ src/./follow-me/ dest/
This works because rsync calls lstat(2) on the source arg as given, and the
trailing slash makes lstat(2) follow the symlink, giving rise to a directory in the
file-list which overrides the symlink found during the scan of "src/./".
See the SYMBOLIC LINKS section for multi-option info.
--keep-dirlinks, -K
This option causes the receiving side to treat a symlink to a directory as though
it were a real directory, but only if it matches a real directory from the sender.
Without this option, the receiver's symlink would be deleted and replaced with a
real directory.
For example, suppose you transfer a directory "foo" that contains a file "file",
but "foo" is a symlink to directory "bar" on the receiver. Without --keep-
dirlinks, the receiver deletes symlink "foo", recreates it as a directory, and
receives the file into the new directory. With --keep-dirlinks, the receiver keeps
the symlink and "file" ends up in "bar".
One note of caution: if you use --keep-dirlinks, you must trust all the symlinks in
the copy or enable the --munge-links option on the receiving side! If it is
possible for an untrusted user to create their own symlink to any real directory,
the user could then (on a subsequent copy) replace the symlink with a real
directory and affect the content of whatever directory the symlink references. For
backup copies, you are better off using something like a bind mount instead of a
symlink to modify your receiving hierarchy.
See also --copy-dirlinks for an analogous option for the sending side.
See the SYMBOLIC LINKS section for multi-option info.
--hard-links, -H
This tells rsync to look for hard-linked files in the source and link together the
corresponding files on the destination. Without this option, hard-linked files in
the source are treated as though they were separate files.
This option does NOT necessarily ensure that the pattern of hard links on the
destination exactly matches that on the source. Cases in which the destination may
end up with extra hard links include the following:
o If the destination contains extraneous hard-links (more linking than what is
present in the source file list), the copying algorithm will not break them
explicitly. However, if one or more of the paths have content differences,
the normal file-update process will break those extra links (unless you are
using the --inplace option).
o If you specify a --link-dest directory that contains hard links, the linking
of the destination files against the --link-dest files can cause some paths
in the destination to become linked together due to the --link-dest
associations.
Note that rsync can only detect hard links between files that are inside the
transfer set. If rsync updates a file that has extra hard-link connections to
files outside the transfer, that linkage will be broken. If you are tempted to use
the --inplace option to avoid this breakage, be very careful that you know how your
files are being updated so that you are certain that no unintended changes happen
due to lingering hard links (and see the --inplace option for more caveats).
If incremental recursion is active (see --inc-recursive), rsync may transfer a
missing hard-linked file before it finds that another link for that contents exists
elsewhere in the hierarchy. This does not affect the accuracy of the transfer
(i.e. which files are hard-linked together), just its efficiency (i.e. copying the
data for a new, early copy of a hard-linked file that could have been found later
in the transfer in another member of the hard-linked set of files). One way to
avoid this inefficiency is to disable incremental recursion using the --no-inc-
recursive option.
--perms, -p
This option causes the receiving rsync to set the destination permissions to be the
same as the source permissions. (See also the --chmod option for a way to modify
what rsync considers to be the source permissions.)
When this option is off, permissions are set as follows:
o Existing files (including updated files) retain their existing permissions,
though the --executability option might change just the execute permission
for the file.
o New files get their "normal" permission bits set to the source file's
permissions masked with the receiving directory's default permissions
(either the receiving process's umask, or the permissions specified via the
destination directory's default ACL), and their special permission bits
disabled except in the case where a new directory inherits a setgid bit from
its parent directory.
Thus, when --perms and --executability are both disabled, rsync's behavior is the
same as that of other file-copy utilities, such as cp(1) and tar(1).
In summary: to give destination files (both old and new) the source permissions,
use --perms. To give new files the destination-default permissions (while leaving
existing files unchanged), make sure that the --perms option is off and use
--chmod=ugo=rwX (which ensures that all non-masked bits get enabled). If you'd
care to make this latter behavior easier to type, you could define a popt alias for
it, such as putting this line in the file ~/.popt (the following defines the -Z
option, and includes --no-g to use the default group of the destination dir):
rsync alias -Z --no-p --no-g --chmod=ugo=rwX
You could then use this new option in a command such as this one:
rsync -avZ src/ dest/
(Caveat: make sure that -a does not follow -Z, or it will re-enable the two --no-*
options mentioned above.)
The preservation of the destination's setgid bit on newly-created directories when
--perms is off was added in rsync 2.6.7. Older rsync versions erroneously
preserved the three special permission bits for newly-created files when --perms
was off, while overriding the destination's setgid bit setting on a newly-created
directory. Default ACL observance was added to the ACL patch for rsync 2.6.7, so
older (or non-ACL-enabled) rsyncs use the umask even if default ACLs are present.
(Keep in mind that it is the version of the receiving rsync that affects these
behaviors.)
--executability, -E
This option causes rsync to preserve the executability (or non-executability) of
regular files when --perms is not enabled. A regular file is considered to be
executable if at least one 'x' is turned on in its permissions. When an existing
destination file's executability differs from that of the corresponding source
file, rsync modifies the destination file's permissions as follows:
o To make a file non-executable, rsync turns off all its 'x' permissions.
o To make a file executable, rsync turns on each 'x' permission that has a
corresponding 'r' permission enabled.
If --perms is enabled, this option is ignored.
--acls, -A
This option causes rsync to update the destination ACLs to be the same as the
source ACLs. The option also implies --perms.
The source and destination systems must have compatible ACL entries for this option
to work properly. See the --fake-super option for a way to backup and restore ACLs
that are not compatible.
--xattrs, -X
This option causes rsync to update the destination extended attributes to be the
same as the source ones.
For systems that support extended-attribute namespaces, a copy being done by a
super-user copies all namespaces except system.*. A normal user only copies the
user.* namespace. To be able to backup and restore non-user namespaces as a normal
user, see the --fake-super option.
The above name filtering can be overridden by using one or more filter options with
the x modifier. When you specify an xattr-affecting filter rule, rsync requires
that you do your own system/user filtering, as well as any additional filtering for
what xattr names are copied and what names are allowed to be deleted. For example,
to skip the system namespace, you could specify:
--filter='-x system.*'
To skip all namespaces except the user namespace, you could specify a negated-user
match:
--filter='-x! user.*'
To prevent any attributes from being deleted, you could specify a receiver-only
rule that excludes all names:
--filter='-xr *'
Note that the -X option does not copy rsync's special xattr values (e.g. those
used by --fake-super) unless you repeat the option (e.g. -XX). This "copy all
xattrs" mode cannot be used with --fake-super.
--chmod=CHMOD
This option tells rsync to apply one or more comma-separated "chmod" modes to the
permission of the files in the transfer. The resulting value is treated as though
it were the permissions that the sending side supplied for the file, which means
that this option can seem to have no effect on existing files if --perms is not
enabled.
In addition to the normal parsing rules specified in the chmod(1) manpage, you can
specify an item that should only apply to a directory by prefixing it with a 'D',
or specify an item that should only apply to a file by prefixing it with a 'F'.
For example, the following will ensure that all directories get marked set-gid,
that no files are other-writable, that both are user-writable and group-writable,
and that both have consistent executability across all bits:
--chmod=Dg+s,ug+w,Fo-w,+X
Using octal mode numbers is also allowed:
--chmod=D2775,F664
It is also legal to specify multiple --chmod options, as each additional option is
just appended to the list of changes to make.
See the --perms and --executability options for how the resulting permission value
can be applied to the files in the transfer.
--owner, -o
This option causes rsync to set the owner of the destination file to be the same as
the source file, but only if the receiving rsync is being run as the super-user
(see also the --super and --fake-super options). Without this option, the owner of
new and/or transferred files are set to the invoking user on the receiving side.
The preservation of ownership will associate matching names by default, but may
fall back to using the ID number in some circumstances (see also the --numeric-ids
option for a full discussion).
--group, -g
This option causes rsync to set the group of the destination file to be the same as
the source file. If the receiving program is not running as the super-user (or if
--no-super was specified), only groups that the invoking user on the receiving side
is a member of will be preserved. Without this option, the group is set to the
default group of the invoking user on the receiving side.
The preservation of group information will associate matching names by default, but
may fall back to using the ID number in some circumstances (see also the --numeric-
ids option for a full discussion).
--devices
This option causes rsync to transfer character and block device files to the remote
system to recreate these devices. If the receiving rsync is not being run as the
super-user, rsync silently skips creating the device files (see also the --super
and --fake-super options).
By default, rsync generates a "non-regular file" warning for each device file
encountered when this option is not set. You can silence the warning by specifying
--info=nonreg0.
--specials
This option causes rsync to transfer special files, such as named sockets and
fifos. If the receiving rsync is not being run as the super-user, rsync silently
skips creating the special files (see also the --super and --fake-super options).
By default, rsync generates a "non-regular file" warning for each special file
encountered when this option is not set. You can silence the warning by specifying
--info=nonreg0.
-D The -D option is equivalent to "--devices --specials".
--copy-devices
This tells rsync to treat a device on the sending side as a regular file, allowing
it to be copied to a normal destination file (or another device if --write-devices
was also specified).
This option is refused by default by an rsync daemon.
--write-devices
This tells rsync to treat a device on the receiving side as a regular file,
allowing the writing of file data into a device.
This option implies the --inplace option.
Be careful using this, as you should know what devices are present on the receiving
side of the transfer, especially when running rsync as root.
This option is refused by default by an rsync daemon.
--times, -t
This tells rsync to transfer modification times along with the files and update
them on the remote system. Note that if this option is not used, the optimization
that excludes files that have not been modified cannot be effective; in other
words, a missing -t (or -a) will cause the next transfer to behave as if it used
--ignore-times (-I), causing all files to be updated (though rsync's delta-transfer
algorithm will make the update fairly efficient if the files haven't actually
changed, you're much better off using -t).
A modern rsync that is using transfer protocol 30 or 31 conveys a modify time using
up to 8-bytes. If rsync is forced to speak an older protocol (perhaps due to the
remote rsync being older than 3.0.0) a modify time is conveyed using 4-bytes. Prior
to 3.2.7, these shorter values could convey a date range of 13-Dec-1901 to
19-Jan-2038. Beginning with 3.2.7, these 4-byte values now convey a date range of
1-Jan-1970 to 7-Feb-2106. If you have files dated older than 1970, make sure your
rsync executables are upgraded so that the full range of dates can be conveyed.
--atimes, -U
This tells rsync to set the access (use) times of the destination files to the same
value as the source files.
If repeated, it also sets the --open-noatime option, which can help you to make the
sending and receiving systems have the same access times on the transferred files
without needing to run rsync an extra time after a file is transferred.
Note that some older rsync versions (prior to 3.2.0) may have been built with a
pre-release --atimes patch that does not imply --open-noatime when this option is
repeated.
--open-noatime
This tells rsync to open files with the O_NOATIME flag (on systems that support it)
to avoid changing the access time of the files that are being transferred. If your
OS does not support the O_NOATIME flag then rsync will silently ignore this option.
Note also that some filesystems are mounted to avoid updating the atime on read
access even without the O_NOATIME flag being set.
--crtimes, -N,
This tells rsync to set the create times (newness) of the destination files to the
same value as the source files.
--omit-dir-times, -O
This tells rsync to omit directories when it is preserving modification, access,
and create times. If NFS is sharing the directories on the receiving side, it is a
good idea to use -O. This option is inferred if you use --backup without --backup-
dir.
This option also has the side-effect of avoiding early creation of missing sub-
directories when incremental recursion is enabled, as discussed in the --inc-
recursive section.
--omit-link-times, -J
This tells rsync to omit symlinks when it is preserving modification, access, and
create times.
--super
This tells the receiving side to attempt super-user activities even if the
receiving rsync wasn't run by the super-user. These activities include: preserving
users via the --owner option, preserving all groups (not just the current user's
groups) via the --group option, and copying devices via the --devices option. This
is useful for systems that allow such activities without being the super-user, and
also for ensuring that you will get errors if the receiving side isn't being run as
the super-user. To turn off super-user activities, the super-user can use --no-
super.
--fake-super
When this option is enabled, rsync simulates super-user activities by
saving/restoring the privileged attributes via special extended attributes that are
attached to each file (as needed). This includes the file's owner and group (if it
is not the default), the file's device info (device & special files are created as
empty text files), and any permission bits that we won't allow to be set on the
real file (e.g. the real file gets u-s,g-s,o-t for safety) or that would limit the
owner's access (since the real super-user can always access/change a file, the
files we create can always be accessed/changed by the creating user). This option
also handles ACLs (if --acls was specified) and non-user extended attributes (if
--xattrs was specified).
This is a good way to backup data without using a super-user, and to store ACLs
from incompatible systems.
The --fake-super option only affects the side where the option is used. To affect
the remote side of a remote-shell connection, use the --remote-option (-M) option:
rsync -av -M--fake-super /src/ host:/dest/
For a local copy, this option affects both the source and the destination. If you
wish a local copy to enable this option just for the destination files, specify
-M--fake-super. If you wish a local copy to enable this option just for the source
files, combine --fake-super with -M--super.
This option is overridden by both --super and --no-super.
See also the fake super setting in the daemon's rsyncd.conf file.
--sparse, -S
Try to handle sparse files efficiently so they take up less space on the
destination. If combined with --inplace the file created might not end up with
sparse blocks with some combinations of kernel version and/or filesystem type. If
--whole-file is in effect (e.g. for a local copy) then it will always work because
rsync truncates the file prior to writing out the updated version.
Note that versions of rsync older than 3.1.3 will reject the combination of
--sparse and --inplace.
--preallocate
This tells the receiver to allocate each destination file to its eventual size
before writing data to the file. Rsync will only use the real filesystem-level
preallocation support provided by Linux's fallocate(2) system call or Cygwin's
posix_fallocate(3), not the slow glibc implementation that writes a null byte into
each block.
Without this option, larger files may not be entirely contiguous on the filesystem,
but with this option rsync will probably copy more slowly. If the destination is
not an extent-supporting filesystem (such as ext4, xfs, NTFS, etc.), this option
may have no positive effect at all.
If combined with --sparse, the file will only have sparse blocks (as opposed to
allocated sequences of null bytes) if the kernel version and filesystem type
support creating holes in the allocated data.
--dry-run, -n
This makes rsync perform a trial run that doesn't make any changes (and produces
mostly the same output as a real run). It is most commonly used in combination
with the --verbose (-v) and/or --itemize-changes (-i) options to see what an rsync
command is going to do before one actually runs it.
The output of --itemize-changes is supposed to be exactly the same on a dry run and
a subsequent real run (barring intentional trickery and system call failures); if
it isn't, that's a bug. Other output should be mostly unchanged, but may differ in
some areas. Notably, a dry run does not send the actual data for file transfers,
so --progress has no effect, the "bytes sent", "bytes received", "literal data",
and "matched data" statistics are too small, and the "speedup" value is equivalent
to a run where no file transfers were needed.
--whole-file, -W
This option disables rsync's delta-transfer algorithm, which causes all transferred
files to be sent whole. The transfer may be faster if this option is used when the
bandwidth between the source and destination machines is higher than the bandwidth
to disk (especially when the "disk" is actually a networked filesystem). This is
the default when both the source and destination are specified as local paths, but
only if no batch-writing option is in effect.
--no-whole-file, --no-W
Disable whole-file updating when it is enabled by default for a local transfer.
This usually slows rsync down, but it can be useful if you are trying to minimize
the writes to the destination file (if combined with --inplace) or for testing the
checksum-based update algorithm.
See also the --whole-file option.
--checksum-choice=STR, --cc=STR
This option overrides the checksum algorithms. If one algorithm name is specified,
it is used for both the transfer checksums and (assuming --checksum is specified)
the pre-transfer checksums. If two comma-separated names are supplied, the first
name affects the transfer checksums, and the second name affects the pre-transfer
checksums (-c).
The checksum options that you may be able to use are:
o auto (the default automatic choice)
o xxh128
o xxh3
o xxh64 (aka xxhash)
o md5
o md4
o sha1
o none
Run rsync --version to see the default checksum list compiled into your version
(which may differ from the list above).
If "none" is specified for the first (or only) name, the --whole-file option is
forced on and no checksum verification is performed on the transferred data. If
"none" is specified for the second (or only) name, the --checksum option cannot be
used.
The "auto" option is the default, where rsync bases its algorithm choice on a
negotiation between the client and the server as follows:
When both sides of the transfer are at least 3.2.0, rsync chooses the first
algorithm in the client's list of choices that is also in the server's list of
choices. If no common checksum choice is found, rsync exits with an error. If the
remote rsync is too old to support checksum negotiation, a value is chosen based on
the protocol version (which chooses between MD5 and various flavors of MD4 based on
protocol age).
The default order can be customized by setting the environment variable
RSYNC_CHECKSUM_LIST to a space-separated list of acceptable checksum names. If the
string contains a "&" character, it is separated into the "client string & server
string", otherwise the same string applies to both. If the string (or string
portion) contains no non-whitespace characters, the default checksum list is used.
This method does not allow you to specify the transfer checksum separately from the
pre-transfer checksum, and it discards "auto" and all unknown checksum names. A
list with only invalid names results in a failed negotiation.
The use of the --checksum-choice option overrides this environment list.
--one-file-system, -x
This tells rsync to avoid crossing a filesystem boundary when recursing. This does
not limit the user's ability to specify items to copy from multiple filesystems,
just rsync's recursion through the hierarchy of each directory that the user
specified, and also the analogous recursion on the receiving side during deletion.
Also keep in mind that rsync treats a "bind" mount to the same device as being on
the same filesystem.
If this option is repeated, rsync omits all mount-point directories from the copy.
Otherwise, it includes an empty directory at each mount-point it encounters (using
the attributes of the mounted directory because those of the underlying mount-point
directory are inaccessible).
If rsync has been told to collapse symlinks (via --copy-links or --copy-unsafe-
links), a symlink to a directory on another device is treated like a mount-point.
Symlinks to non-directories are unaffected by this option.
--ignore-non-existing, --existing
This tells rsync to skip creating files (including directories) that do not exist
yet on the destination. If this option is combined with the --ignore-existing
option, no files will be updated (which can be useful if all you want to do is
delete extraneous files).
This option is a TRANSFER RULE, so don't expect any exclude side effects.
--ignore-existing
This tells rsync to skip updating files that already exist on the destination (this
does not ignore existing directories, or nothing would get done). See also
--ignore-non-existing.
This option is a TRANSFER RULE, so don't expect any exclude side effects.
This option can be useful for those doing backups using the --link-dest option when
they need to continue a backup run that got interrupted. Since a --link-dest run
is copied into a new directory hierarchy (when it is used properly), using
[--ignore-existing will ensure that the already-handled files don't get tweaked
(which avoids a change in permissions on the hard-linked files). This does mean
that this option is only looking at the existing files in the destination hierarchy
itself.
When --info=skip2 is used rsync will output "FILENAME exists (INFO)" messages where
the INFO indicates one of "type change", "sum change" (requires -c), "file change"
(based on the quick check), "attr change", or "uptodate". Using --info=skip1
(which is also implied by 2 -v options) outputs the exists message without the INFO
suffix.
--remove-source-files
This tells rsync to remove from the sending side the files (meaning non-
directories) that are a part of the transfer and have been successfully duplicated
on the receiving side.
Note that you should only use this option on source files that are quiescent. If
you are using this to move files that show up in a particular directory over to
another host, make sure that the finished files get renamed into the source
directory, not directly written into it, so that rsync can't possibly transfer a
file that is not yet fully written. If you can't first write the files into a
different directory, you should use a naming idiom that lets rsync avoid
transferring files that are not yet finished (e.g. name the file "foo.new" when it
is written, rename it to "foo" when it is done, and then use the option
--exclude='*.new' for the rsync transfer).
Starting with 3.1.0, rsync will skip the sender-side removal (and output an error)
if the file's size or modify time has not stayed unchanged.
Starting with 3.2.6, a local rsync copy will ensure that the sender does not remove
a file the receiver just verified, such as when the user accidentally makes the
source and destination directory the same path.
--delete
This tells rsync to delete extraneous files from the receiving side (ones that
aren't on the sending side), but only for the directories that are being
synchronized. You must have asked rsync to send the whole directory (e.g. "dir" or
"dir/") without using a wildcard for the directory's contents (e.g. "dir/*") since
the wildcard is expanded by the shell and rsync thus gets a request to transfer
individual files, not the files' parent directory. Files that are excluded from
the transfer are also excluded from being deleted unless you use the --delete-
excluded option or mark the rules as only matching on the sending side (see the
include/exclude modifiers in the FILTER RULES section).
Prior to rsync 2.6.7, this option would have no effect unless --recursive was
enabled. Beginning with 2.6.7, deletions will also occur when --dirs (-d) is
enabled, but only for directories whose contents are being copied.
This option can be dangerous if used incorrectly! It is a very good idea to first
try a run using the --dry-run (-n) option to see what files are going to be
deleted.
If the sending side detects any I/O errors, then the deletion of any files at the
destination will be automatically disabled. This is to prevent temporary
filesystem failures (such as NFS errors) on the sending side from causing a massive
deletion of files on the destination. You can override this with the --ignore-
errors option.
The --delete option may be combined with one of the --delete-WHEN options without
conflict, as well as --delete-excluded. However, if none of the --delete-WHEN
options are specified, rsync will choose the --delete-during algorithm when talking
to rsync 3.0.0 or newer, or the --delete-before algorithm when talking to an older
rsync. See also --delete-delay and --delete-after.
--delete-before
Request that the file-deletions on the receiving side be done before the transfer
starts. See --delete (which is implied) for more details on file-deletion.
Deleting before the transfer is helpful if the filesystem is tight for space and
removing extraneous files would help to make the transfer possible. However, it
does introduce a delay before the start of the transfer, and this delay might cause
the transfer to timeout (if --timeout was specified). It also forces rsync to use
the old, non-incremental recursion algorithm that requires rsync to scan all the
files in the transfer into memory at once (see --recursive).
--delete-during, --del
Request that the file-deletions on the receiving side be done incrementally as the
transfer happens. The per-directory delete scan is done right before each
directory is checked for updates, so it behaves like a more efficient --delete-
before, including doing the deletions prior to any per-directory filter files being
updated. This option was first added in rsync version 2.6.4. See --delete (which
is implied) for more details on file-deletion.
--delete-delay
Request that the file-deletions on the receiving side be computed during the
transfer (like --delete-during), and then removed after the transfer completes.
This is useful when combined with --delay-updates and/or --fuzzy, and is more
efficient than using --delete-after (but can behave differently, since --delete-
after computes the deletions in a separate pass after all updates are done). If
the number of removed files overflows an internal buffer, a temporary file will be
created on the receiving side to hold the names (it is removed while open, so you
shouldn't see it during the transfer). If the creation of the temporary file
fails, rsync will try to fall back to using --delete-after (which it cannot do if
--recursive is doing an incremental scan). See --delete (which is implied) for
more details on file-deletion.
--delete-after
Request that the file-deletions on the receiving side be done after the transfer
has completed. This is useful if you are sending new per-directory merge files as
a part of the transfer and you want their exclusions to take effect for the delete
phase of the current transfer. It also forces rsync to use the old, non-
incremental recursion algorithm that requires rsync to scan all the files in the
transfer into memory at once (see --recursive). See --delete (which is implied) for
more details on file-deletion.
See also the --delete-delay option that might be a faster choice for those that
just want the deletions to occur at the end of the transfer.
--delete-excluded
This option turns any unqualified exclude/include rules into server-side rules that
do not affect the receiver's deletions.
By default, an exclude or include has both a server-side effect (to "hide" and
"show" files when building the server's file list) and a receiver-side effect (to
"protect" and "risk" files when deletions are occurring). Any rule that has no
modifier to specify what sides it is executed on will be instead treated as if it
were a server-side rule only, avoiding any "protect" effects of the rules.
A rule can still apply to both sides even with this option specified if the rule is
given both the sender & receiver modifier letters (e.g., -f'-sr foo'). Receiver-
side protect/risk rules can also be explicitly specified to limit the deletions.
This saves you from having to edit a bunch of -f'- foo' rules into -f'-s foo' (aka
-f'H foo') rules (not to mention the corresponding includes).
See the FILTER RULES section for more information. See --delete (which is implied)
for more details on deletion.
--ignore-missing-args
When rsync is first processing the explicitly requested source files (e.g.
command-line arguments or --files-from entries), it is normally an error if the
file cannot be found. This option suppresses that error, and does not try to
transfer the file. This does not affect subsequent vanished-file errors if a file
was initially found to be present and later is no longer there.
--delete-missing-args
This option takes the behavior of the (implied) --ignore-missing-args option a step
farther: each missing arg will become a deletion request of the corresponding
destination file on the receiving side (should it exist). If the destination file
is a non-empty directory, it will only be successfully deleted if --force or
--delete are in effect. Other than that, this option is independent of any other
type of delete processing.
The missing source files are represented by special file-list entries which display
as a "*missing" entry in the --list-only output.
--ignore-errors
Tells --delete to go ahead and delete files even when there are I/O errors.
--force
This option tells rsync to delete a non-empty directory when it is to be replaced
by a non-directory. This is only relevant if deletions are not active (see
--delete for details).
Note for older rsync versions: --force used to still be required when using
--delete-after, and it used to be non-functional unless the --recursive option was
also enabled.
--max-delete=NUM
This tells rsync not to delete more than NUM files or directories. If that limit
is exceeded, all further deletions are skipped through the end of the transfer. At
the end, rsync outputs a warning (including a count of the skipped deletions) and
exits with an error code of 25 (unless some more important error condition also
occurred).
Beginning with version 3.0.0, you may specify --max-delete=0 to be warned about any
extraneous files in the destination without removing any of them. Older clients
interpreted this as "unlimited", so if you don't know what version the client is,
you can use the less obvious --max-delete=-1 as a backward-compatible way to
specify that no deletions be allowed (though really old versions didn't warn when
the limit was exceeded).
--max-size=SIZE
This tells rsync to avoid transferring any file that is larger than the specified
SIZE. A numeric value can be suffixed with a string to indicate the numeric units
or left unqualified to specify bytes. Feel free to use a fractional value along
with the units, such as --max-size=1.5m.
This option is a TRANSFER RULE, so don't expect any exclude side effects.
The first letter of a units string can be B (bytes), K (kilo), M (mega), G (giga),
T (tera), or P (peta). If the string is a single char or has "ib" added to it
(e.g. "G" or "GiB") then the units are multiples of 1024. If you use a two-letter
suffix that ends with a "B" (e.g. "kb") then you get units that are multiples of
1000. The string's letters can be any mix of upper and lower-case that you want to
use.
Finally, if the string ends with either "+1" or "-1", it is offset by one byte in
the indicated direction. The largest possible value is usually 8192P-1.
Examples: --max-size=1.5mb-1 is 1499999 bytes, and --max-size=2g+1 is 2147483649
bytes.
Note that rsync versions prior to 3.1.0 did not allow --max-size=0.
--min-size=SIZE
This tells rsync to avoid transferring any file that is smaller than the specified
SIZE, which can help in not transferring small, junk files. See the --max-size
option for a description of SIZE and other info.
Note that rsync versions prior to 3.1.0 did not allow --min-size=0.
--max-alloc=SIZE
By default rsync limits an individual malloc/realloc to about 1GB in size. For
most people this limit works just fine and prevents a protocol error causing rsync
to request massive amounts of memory. However, if you have many millions of files
in a transfer, a large amount of server memory, and you don't want to split up your
transfer into multiple parts, you can increase the per-allocation limit to
something larger and rsync will consume more memory.
Keep in mind that this is not a limit on the total size of allocated memory. It is
a sanity-check value for each individual allocation.
See the --max-size option for a description of how SIZE can be specified. The
default suffix if none is given is bytes.
Beginning in 3.2.3, a value of 0 specifies no limit.
You can set a default value using the environment variable RSYNC_MAX_ALLOC using
the same SIZE values as supported by this option. If the remote rsync doesn't
understand the --max-alloc option, you can override an environmental value by
specifying --max-alloc=1g, which will make rsync avoid sending the option to the
remote side (because "1G" is the default).
--block-size=SIZE, -B
This forces the block size used in rsync's delta-transfer algorithm to a fixed
value. It is normally selected based on the size of each file being updated. See
the technical report for details.
Beginning in 3.2.3 the SIZE can be specified with a suffix as detailed in the
--max-size option. Older versions only accepted a byte count.
--rsh=COMMAND, -e
This option allows you to choose an alternative remote shell program to use for
communication between the local and remote copies of rsync. Typically, rsync is
configured to use ssh by default, but you may prefer to use rsh on a local network.
If this option is used with [user@]host::module/path, then the remote shell COMMAND
will be used to run an rsync daemon on the remote host, and all data will be
transmitted through that remote shell connection, rather than through a direct
socket connection to a running rsync daemon on the remote host. See the USING
RSYNC-DAEMON FEATURES VIA A REMOTE-SHELL CONNECTION section above.
Beginning with rsync 3.2.0, the RSYNC_PORT environment variable will be set when a
daemon connection is being made via a remote-shell connection. It is set to 0 if
the default daemon port is being assumed, or it is set to the value of the rsync
port that was specified via either the --port option or a non-empty port value in
an rsync:// URL. This allows the script to discern if a non-default port is being
requested, allowing for things such as an SSL or stunnel helper script to connect
to a default or alternate port.
Command-line arguments are permitted in COMMAND provided that COMMAND is presented
to rsync as a single argument. You must use spaces (not tabs or other whitespace)
to separate the command and args from each other, and you can use single- and/or
double-quotes to preserve spaces in an argument (but not backslashes). Note that
doubling a single-quote inside a single-quoted string gives you a single-quote;
likewise for double-quotes (though you need to pay attention to which quotes your
shell is parsing and which quotes rsync is parsing). Some examples:
-e 'ssh -p 2234'
-e 'ssh -o "ProxyCommand nohup ssh firewall nc -w1 %h %p"'
(Note that ssh users can alternately customize site-specific connect options in
their .ssh/config file.)
You can also choose the remote shell program using the RSYNC_RSH environment
variable, which accepts the same range of values as -e.
See also the --blocking-io option which is affected by this option.
--rsync-path=PROGRAM
Use this to specify what program is to be run on the remote machine to start-up
rsync. Often used when rsync is not in the default remote-shell's path (e.g.
--rsync-path=/usr/local/bin/rsync). Note that PROGRAM is run with the help of a
shell, so it can be any program, script, or command sequence you'd care to run, so
long as it does not corrupt the standard-in & standard-out that rsync is using to
communicate.
One tricky example is to set a different default directory on the remote machine
for use with the --relative option. For instance:
rsync -avR --rsync-path="cd /a/b && rsync" host:c/d /e/
--remote-option=OPTION, -M
This option is used for more advanced situations where you want certain effects to
be limited to one side of the transfer only. For instance, if you want to pass
--log-file=FILE and --fake-super to the remote system, specify it like this:
rsync -av -M --log-file=foo -M--fake-super src/ dest/
If you want to have an option affect only the local side of a transfer when it
normally affects both sides, send its negation to the remote side. Like this:
rsync -av -x -M--no-x src/ dest/
Be cautious using this, as it is possible to toggle an option that will cause rsync
to have a different idea about what data to expect next over the socket, and that
will make it fail in a cryptic fashion.
Note that you should use a separate -M option for each remote option you want to
pass. On older rsync versions, the presence of any spaces in the remote-option arg
could cause it to be split into separate remote args, but this requires the use of
--old-args in a modern rsync.
When performing a local transfer, the "local" side is the sender and the "remote"
side is the receiver.
Note some versions of the popt option-parsing library have a bug in them that
prevents you from using an adjacent arg with an equal in it next to a short option
letter (e.g. -M--log-file=/tmp/foo). If this bug affects your version of popt, you
can use the version of popt that is included with rsync.
--cvs-exclude, -C
This is a useful shorthand for excluding a broad range of files that you often
don't want to transfer between systems. It uses a similar algorithm to CVS to
determine if a file should be ignored.
The exclude list is initialized to exclude the following items (these initial items
are marked as perishable -- see the FILTER RULES section):
RCS SCCS CVS CVS.adm RCSLOG cvslog.* tags TAGS .make.state .nse_depinfo *~ #*
.#* ,* _$* *$ *.old *.bak *.BAK *.orig *.rej .del-* *.a *.olb *.o *.obj *.so
*.exe *.Z *.elc *.ln core .svn/ .git/ .hg/ .bzr/
then, files listed in a $HOME/.cvsignore are added to the list and any files listed
in the CVSIGNORE environment variable (all cvsignore names are delimited by
whitespace).
Finally, any file is ignored if it is in the same directory as a .cvsignore file
and matches one of the patterns listed therein. Unlike rsync's filter/exclude
files, these patterns are split on whitespace. See the cvs(1) manual for more
information.
If you're combining -C with your own --filter rules, you should note that these CVS
excludes are appended at the end of your own rules, regardless of where the -C was
placed on the command-line. This makes them a lower priority than any rules you
specified explicitly. If you want to control where these CVS excludes get inserted
into your filter rules, you should omit the -C as a command-line option and use a
combination of --filter=:C and --filter=-C (either on your command-line or by
putting the ":C" and "-C" rules into a filter file with your other rules). The
first option turns on the per-directory scanning for the .cvsignore file. The
second option does a one-time import of the CVS excludes mentioned above.
--filter=RULE, -f
This option allows you to add rules to selectively exclude certain files from the
list of files to be transferred. This is most useful in combination with a
recursive transfer.
You may use as many --filter options on the command line as you like to build up
the list of files to exclude. If the filter contains whitespace, be sure to quote
it so that the shell gives the rule to rsync as a single argument. The text below
also mentions that you can use an underscore to replace the space that separates a
rule from its arg.
See the FILTER RULES section for detailed information on this option.
-F The -F option is a shorthand for adding two --filter rules to your command. The
first time it is used is a shorthand for this rule:
--filter='dir-merge /.rsync-filter'
This tells rsync to look for per-directory .rsync-filter files that have been
sprinkled through the hierarchy and use their rules to filter the files in the
transfer. If -F is repeated, it is a shorthand for this rule:
--filter='exclude .rsync-filter'
This filters out the .rsync-filter files themselves from the transfer.
See the FILTER RULES section for detailed information on how these options work.
--exclude=PATTERN
This option is a simplified form of the --filter option that specifies an exclude
rule and does not allow the full rule-parsing syntax of normal filter rules. This
is equivalent to specifying -f'- PATTERN'.
See the FILTER RULES section for detailed information on this option.
--exclude-from=FILE
This option is related to the --exclude option, but it specifies a FILE that
contains exclude patterns (one per line). Blank lines in the file are ignored, as
are whole-line comments that start with ';' or '#' (filename rules that contain
those characters are unaffected).
If a line begins with "- " (dash, space) or "+ " (plus, space), then the type of
rule is being explicitly specified as an exclude or an include (respectively). Any
rules without such a prefix are taken to be an exclude.
If a line consists of just "!", then the current filter rules are cleared before
adding any further rules.
If FILE is '-', the list will be read from standard input.
--include=PATTERN
This option is a simplified form of the --filter option that specifies an include
rule and does not allow the full rule-parsing syntax of normal filter rules. This
is equivalent to specifying -f'+ PATTERN'.
See the FILTER RULES section for detailed information on this option.
--include-from=FILE
This option is related to the --include option, but it specifies a FILE that
contains include patterns (one per line). Blank lines in the file are ignored, as
are whole-line comments that start with ';' or '#' (filename rules that contain
those characters are unaffected).
If a line begins with "- " (dash, space) or "+ " (plus, space), then the type of
rule is being explicitly specified as an exclude or an include (respectively). Any
rules without such a prefix are taken to be an include.
If a line consists of just "!", then the current filter rules are cleared before
adding any further rules.
If FILE is '-', the list will be read from standard input.
--files-from=FILE
Using this option allows you to specify the exact list of files to transfer (as
read from the specified FILE or '-' for standard input). It also tweaks the
default behavior of rsync to make transferring just the specified files and
directories easier:
o The --relative (-R) option is implied, which preserves the path information
that is specified for each item in the file (use --no-relative or --no-R if
you want to turn that off).
o The --dirs (-d) option is implied, which will create directories specified
in the list on the destination rather than noisily skipping them (use --no-
dirs or --no-d if you want to turn that off).
o The --archive (-a) option's behavior does not imply --recursive (-r), so
specify it explicitly, if you want it.
o These side-effects change the default state of rsync, so the position of the
--files-from option on the command-line has no bearing on how other options
are parsed (e.g. -a works the same before or after --files-from, as does
--no-R and all other options).
The filenames that are read from the FILE are all relative to the source dir -- any
leading slashes are removed and no ".." references are allowed to go higher than
the source dir. For example, take this command:
rsync -a --files-from=/tmp/foo /usr remote:/backup
If /tmp/foo contains the string "bin" (or even "/bin"), the /usr/bin directory will
be created as /backup/bin on the remote host. If it contains "bin/" (note the
trailing slash), the immediate contents of the directory would also be sent
(without needing to be explicitly mentioned in the file -- this began in version
2.6.4). In both cases, if the -r option was enabled, that dir's entire hierarchy
would also be transferred (keep in mind that -r needs to be specified explicitly
with --files-from, since it is not implied by -a. Also note that the effect of the
(enabled by default) -r option is to duplicate only the path info that is read from
the file -- it does not force the duplication of the source-spec path (/usr in this
case).
In addition, the --files-from file can be read from the remote host instead of the
local host if you specify a "host:" in front of the file (the host must match one
end of the transfer). As a short-cut, you can specify just a prefix of ":" to mean
"use the remote end of the transfer". For example:
rsync -a --files-from=:/path/file-list src:/ /tmp/copy
This would copy all the files specified in the /path/file-list file that was
located on the remote "src" host.
If the --iconv and --secluded-args options are specified and the --files-from
filenames are being sent from one host to another, the filenames will be translated
from the sending host's charset to the receiving host's charset.
NOTE: sorting the list of files in the --files-from input helps rsync to be more
efficient, as it will avoid re-visiting the path elements that are shared between
adjacent entries. If the input is not sorted, some path elements (implied
directories) may end up being scanned multiple times, and rsync will eventually
unduplicate them after they get turned into file-list elements.
--from0, -0
This tells rsync that the rules/filenames it reads from a file are terminated by a
null ('\0') character, not a NL, CR, or CR+LF. This affects --exclude-from,
--include-from, --files-from, and any merged files specified in a --filter rule.
It does not affect --cvs-exclude (since all names read from a .cvsignore file are
split on whitespace).
--old-args
This option tells rsync to stop trying to protect the arg values on the remote side
from unintended word-splitting or other misinterpretation. It also allows the
client to treat an empty arg as a "." instead of generating an error.
The default in a modern rsync is for "shell-active" characters (including spaces)
to be backslash-escaped in the args that are sent to the remote shell. The
wildcard characters *, ?, [, & ] are not escaped in filename args (allowing them to
expand into multiple filenames) while being protected in option args, such as
--usermap.
If you have a script that wants to use old-style arg splitting in its filenames,
specify this option once. If the remote shell has a problem with any backslash
escapes at all, specify this option twice.
You may also control this setting via the RSYNC_OLD_ARGS environment variable. If
it has the value "1", rsync will default to a single-option setting. If it has the
value "2" (or more), rsync will default to a repeated-option setting. If it is
"0", you'll get the default escaping behavior. The environment is always
overridden by manually specified positive or negative options (the negative is
--no-old-args).
Note that this option also disables the extra safety check added in 3.2.5 that
ensures that a remote sender isn't including extra top-level items in the file-list
that you didn't request. This side-effect is necessary because we can't know for
sure what names to expect when the remote shell is interpreting the args.
This option conflicts with the --secluded-args option.
--secluded-args, -s
This option sends all filenames and most options to the remote rsync via the
protocol (not the remote shell command line) which avoids letting the remote shell
modify them. Wildcards are expanded on the remote host by rsync instead of a
shell.
This is similar to the default backslash-escaping of args that was added in 3.2.4
(see --old-args) in that it prevents things like space splitting and unwanted
special-character side-effects. However, it has the drawbacks of being incompatible
with older rsync versions (prior to 3.0.0) and of being refused by restricted
shells that want to be able to inspect all the option values for safety.
This option is useful for those times that you need the argument's character set to
be converted for the remote host, if the remote shell is incompatible with the
default backslash-escpaing method, or there is some other reason that you want the
majority of the options and arguments to bypass the command-line of the remote
shell.
If you combine this option with --iconv, the args related to the remote side will
be translated from the local to the remote character-set. The translation happens
before wild-cards are expanded. See also the --files-from option.
You may also control this setting via the RSYNC_PROTECT_ARGS environment variable.
If it has a non-zero value, this setting will be enabled by default, otherwise it
will be disabled by default. Either state is overridden by a manually specified
positive or negative version of this option (note that --no-s and --no-secluded-
args are the negative versions). This environment variable is also superseded by a
non-zero RSYNC_OLD_ARGS export.
This option conflicts with the --old-args option.
This option used to be called --protect-args (before 3.2.6) and that older name can
still be used (though specifying it as -s is always the easiest and most compatible
choice).
--trust-sender
This option disables two extra validation checks that a local client performs on
the file list generated by a remote sender. This option should only be used if you
trust the sender to not put something malicious in the file list (something that
could possibly be done via a modified rsync, a modified shell, or some other
similar manipulation).
Normally, the rsync client (as of version 3.2.5) runs two extra validation checks
when pulling files from a remote rsync:
o It verifies that additional arg items didn't get added at the top of the
transfer.
o It verifies that none of the items in the file list are names that should
have been excluded (if filter rules were specified).
Note that various options can turn off one or both of these checks if the option
interferes with the validation. For instance:
o Using a per-directory filter file reads filter rules that only the server
knows about, so the filter checking is disabled.
o Using the --old-args option allows the sender to manipulate the requested
args, so the arg checking is disabled.
o Reading the files-from list from the server side means that the client
doesn't know the arg list, so the arg checking is disabled.
o Using --read-batch disables both checks since the batch file's contents will
have been verified when it was created.
This option may help an under-powered client server if the extra pattern matching
is slowing things down on a huge transfer. It can also be used to work around a
currently-unknown bug in the verification logic for a transfer from a trusted
sender.
When using this option it is a good idea to specify a dedicated destination
directory, as discussed in the MULTI-HOST SECURITY section.
--copy-as=USER[:GROUP]
This option instructs rsync to use the USER and (if specified after a colon) the
GROUP for the copy operations. This only works if the user that is running rsync
has the ability to change users. If the group is not specified then the user's
default groups are used.
This option can help to reduce the risk of an rsync being run as root into or out
of a directory that might have live changes happening to it and you want to make
sure that root-level read or write actions of system files are not possible. While
you could alternatively run all of rsync as the specified user, sometimes you need
the root-level host-access credentials to be used, so this allows rsync to drop
root for the copying part of the operation after the remote-shell or daemon
connection is established.
The option only affects one side of the transfer unless the transfer is local, in
which case it affects both sides. Use the --remote-option to affect the remote
side, such as -M--copy-as=joe. For a local transfer, the lsh (or lsh.sh) support
file provides a local-shell helper script that can be used to allow a "localhost:"
or "lh:" host-spec to be specified without needing to setup any remote shells,
allowing you to specify remote options that affect the side of the transfer that is
using the host-spec (and using hostname "lh" avoids the overriding of the remote
directory to the user's home dir).
For example, the following rsync writes the local files as user "joe":
sudo rsync -aiv --copy-as=joe host1:backups/joe/ /home/joe/
This makes all files owned by user "joe", limits the groups to those that are
available to that user, and makes it impossible for the joe user to do a timed
exploit of the path to induce a change to a file that the joe user has no
permissions to change.
The following command does a local copy into the "dest/" dir as user "joe"
(assuming you've installed support/lsh into a dir on your $PATH):
sudo rsync -aive lsh -M--copy-as=joe src/ lh:dest/
--temp-dir=DIR, -T
This option instructs rsync to use DIR as a scratch directory when creating
temporary copies of the files transferred on the receiving side. The default
behavior is to create each temporary file in the same directory as the associated
destination file. Beginning with rsync 3.1.1, the temp-file names inside the
specified DIR will not be prefixed with an extra dot (though they will still have a
random suffix added).
This option is most often used when the receiving disk partition does not have
enough free space to hold a copy of the largest file in the transfer. In this case
(i.e. when the scratch directory is on a different disk partition), rsync will not
be able to rename each received temporary file over the top of the associated
destination file, but instead must copy it into place. Rsync does this by copying
the file over the top of the destination file, which means that the destination
file will contain truncated data during this copy. If this were not done this way
(even if the destination file were first removed, the data locally copied to a
temporary file in the destination directory, and then renamed into place) it would
be possible for the old file to continue taking up disk space (if someone had it
open), and thus there might not be enough room to fit the new version on the disk
at the same time.
If you are using this option for reasons other than a shortage of disk space, you
may wish to combine it with the --delay-updates option, which will ensure that all
copied files get put into subdirectories in the destination hierarchy, awaiting the
end of the transfer. If you don't have enough room to duplicate all the arriving
files on the destination partition, another way to tell rsync that you aren't
overly concerned about disk space is to use the --partial-dir option with a
relative path; because this tells rsync that it is OK to stash off a copy of a
single file in a subdir in the destination hierarchy, rsync will use the partial-
dir as a staging area to bring over the copied file, and then rename it into place
from there. (Specifying a --partial-dir with an absolute path does not have this
side-effect.)
--fuzzy, -y
This option tells rsync that it should look for a basis file for any destination
file that is missing. The current algorithm looks in the same directory as the
destination file for either a file that has an identical size and modified-time, or
a similarly-named file. If found, rsync uses the fuzzy basis file to try to speed
up the transfer.
If the option is repeated, the fuzzy scan will also be done in any matching
alternate destination directories that are specified via --compare-dest, --copy-
dest, or --link-dest.
Note that the use of the --delete option might get rid of any potential fuzzy-match
files, so either use --delete-after or specify some filename exclusions if you need
to prevent this.
--compare-dest=DIR
This option instructs rsync to use DIR on the destination machine as an additional
hierarchy to compare destination files against doing transfers (if the files are
missing in the destination directory). If a file is found in DIR that is identical
to the sender's file, the file will NOT be transferred to the destination
directory. This is useful for creating a sparse backup of just files that have
changed from an earlier backup. This option is typically used to copy into an
empty (or newly created) directory.
Beginning in version 2.6.4, multiple --compare-dest directories may be provided,
which will cause rsync to search the list in the order specified for an exact
match. If a match is found that differs only in attributes, a local copy is made
and the attributes updated. If a match is not found, a basis file from one of the
DIRs will be selected to try to speed up the transfer.
If DIR is a relative path, it is relative to the destination directory. See also
--copy-dest and --link-dest.
NOTE: beginning with version 3.1.0, rsync will remove a file from a non-empty
destination hierarchy if an exact match is found in one of the compare-dest
hierarchies (making the end result more closely match a fresh copy).
--copy-dest=DIR
This option behaves like --compare-dest, but rsync will also copy unchanged files
found in DIR to the destination directory using a local copy. This is useful for
doing transfers to a new destination while leaving existing files intact, and then
doing a flash-cutover when all files have been successfully transferred.
Multiple --copy-dest directories may be provided, which will cause rsync to search
the list in the order specified for an unchanged file. If a match is not found, a
basis file from one of the DIRs will be selected to try to speed up the transfer.
If DIR is a relative path, it is relative to the destination directory. See also
--compare-dest and --link-dest.
--link-dest=DIR
This option behaves like --copy-dest, but unchanged files are hard linked from DIR
to the destination directory. The files must be identical in all preserved
attributes (e.g. permissions, possibly ownership) in order for the files to be
linked together. An example:
rsync -av --link-dest=$PWD/prior_dir host:src_dir/ new_dir/
If files aren't linking, double-check their attributes. Also check if some
attributes are getting forced outside of rsync's control, such a mount option that
squishes root to a single user, or mounts a removable drive with generic ownership
(such as OS X's "Ignore ownership on this volume" option).
Beginning in version 2.6.4, multiple --link-dest directories may be provided, which
will cause rsync to search the list in the order specified for an exact match
(there is a limit of 20 such directories). If a match is found that differs only
in attributes, a local copy is made and the attributes updated. If a match is not
found, a basis file from one of the DIRs will be selected to try to speed up the
transfer.
This option works best when copying into an empty destination hierarchy, as
existing files may get their attributes tweaked, and that can affect alternate
destination files via hard-links. Also, itemizing of changes can get a bit
muddled. Note that prior to version 3.1.0, an alternate-directory exact match
would never be found (nor linked into the destination) when a destination file
already exists.
Note that if you combine this option with --ignore-times, rsync will not link any
files together because it only links identical files together as a substitute for
transferring the file, never as an additional check after the file is updated.
If DIR is a relative path, it is relative to the destination directory. See also
--compare-dest and --copy-dest.
Note that rsync versions prior to 2.6.1 had a bug that could prevent --link-dest
from working properly for a non-super-user when --owner (-o) was specified (or
implied). You can work-around this bug by avoiding the -o option (or using --no-o)
when sending to an old rsync.
--compress, -z
With this option, rsync compresses the file data as it is sent to the destination
machine, which reduces the amount of data being transmitted -- something that is
useful over a slow connection.
Rsync supports multiple compression methods and will choose one for you unless you
force the choice using the --compress-choice (--zc) option.
Run rsync --version to see the default compress list compiled into your version.
When both sides of the transfer are at least 3.2.0, rsync chooses the first
algorithm in the client's list of choices that is also in the server's list of
choices. If no common compress choice is found, rsync exits with an error. If the
remote rsync is too old to support checksum negotiation, its list is assumed to be
"zlib".
The default order can be customized by setting the environment variable
RSYNC_COMPRESS_LIST to a space-separated list of acceptable compression names. If
the string contains a "&" character, it is separated into the "client string &
server string", otherwise the same string applies to both. If the string (or
string portion) contains no non-whitespace characters, the default compress list is
used. Any unknown compression names are discarded from the list, but a list with
only invalid names results in a failed negotiation.
There are some older rsync versions that were configured to reject a -z option and
require the use of -zz because their compression library was not compatible with
the default zlib compression method. You can usually ignore this weirdness unless
the rsync server complains and tells you to specify -zz.
--compress-choice=STR, --zc=STR
This option can be used to override the automatic negotiation of the compression
algorithm that occurs when --compress is used. The option implies --compress
unless "none" was specified, which instead implies --no-compress.
The compression options that you may be able to use are:
o zstd
o lz4
o zlibx
o zlib
o none
Run rsync --version to see the default compress list compiled into your version
(which may differ from the list above).
Note that if you see an error about an option named --old-compress or --new-
compress, this is rsync trying to send the --compress-choice=zlib or --compress-
choice=zlibx option in a backward-compatible manner that more rsync versions
understand. This error indicates that the older rsync version on the server will
not allow you to force the compression type.
Note that the "zlibx" compression algorithm is just the "zlib" algorithm with
matched data excluded from the compression stream (to try to make it more
compatible with an external zlib implementation).
--compress-level=NUM, --zl=NUM
Explicitly set the compression level to use (see --compress, -z) instead of letting
it default. The --compress option is implied as long as the level chosen is not a
"don't compress" level for the compression algorithm that is in effect (e.g. zlib
compression treats level 0 as "off").
The level values vary depending on the checksum in effect. Because rsync will
negotiate a checksum choice by default (when the remote rsync is new enough), it
can be good to combine this option with a --compress-choice (--zc) option unless
you're sure of the choice in effect. For example:
rsync -aiv --zc=zstd --zl=22 host:src/ dest/
For zlib & zlibx compression the valid values are from 1 to 9 with 6 being the
default. Specifying --zl=0 turns compression off, and specifying --zl=-1 chooses
the default level of 6.
For zstd compression the valid values are from -131072 to 22 with 3 being the
default. Specifying 0 chooses the default of 3.
For lz4 compression there are no levels, so the value is always 0.
If you specify a too-large or too-small value, the number is silently limited to a
valid value. This allows you to specify something like --zl=999999999 and be
assured that you'll end up with the maximum compression level no matter what
algorithm was chosen.
If you want to know the compression level that is in effect, specify --debug=nstr
to see the "negotiated string" results. This will report something like
"Client compress: zstd (level 3)" (along with the checksum choice in effect).
--skip-compress=LIST
NOTE: no compression method currently supports per-file compression changes, so
this option has no effect.
Override the list of file suffixes that will be compressed as little as possible.
Rsync sets the compression level on a per-file basis based on the file's suffix.
If the compression algorithm has an "off" level, then no compression occurs for
those files. Other algorithms that support changing the streaming level on-the-fly
will have the level minimized to reduces the CPU usage as much as possible for a
matching file.
The LIST should be one or more file suffixes (without the dot) separated by slashes
(/). You may specify an empty string to indicate that no files should be skipped.
Simple character-class matching is supported: each must consist of a list of
letters inside the square brackets (e.g. no special classes, such as "[:alpha:]",
are supported, and '-' has no special meaning).
The characters asterisk (*) and question-mark (?) have no special meaning.
Here's an example that specifies 6 suffixes to skip (since 1 of the 5 rules matches
2 suffixes):
--skip-compress=gz/jpg/mp[34]/7z/bz2
The default file suffixes in the skip-compress list in this version of rsync are:
3g2 3gp 7z aac ace apk avi bz2 deb dmg ear f4v flac flv gpg gz iso jar jpeg jpg
lrz lz lz4 lzma lzo m1a m1v m2a m2ts m2v m4a m4b m4p m4r m4v mka mkv mov mp1
mp2 mp3 mp4 mpa mpeg mpg mpv mts odb odf odg odi odm odp ods odt oga ogg ogm
ogv ogx opus otg oth otp ots ott oxt png qt rar rpm rz rzip spx squashfs sxc
sxd sxg sxm sxw sz tbz tbz2 tgz tlz ts txz tzo vob war webm webp xz z zip zst
This list will be replaced by your --skip-compress list in all but one situation: a
copy from a daemon rsync will add your skipped suffixes to its list of non-
compressing files (and its list may be configured to a different default).
--numeric-ids
With this option rsync will transfer numeric group and user IDs rather than using
user and group names and mapping them at both ends.
By default rsync will use the username and groupname to determine what ownership to
give files. The special uid 0 and the special group 0 are never mapped via
user/group names even if the --numeric-ids option is not specified.
If a user or group has no name on the source system or it has no match on the
destination system, then the numeric ID from the source system is used instead.
See also the use chroot setting in the rsyncd.conf manpage for some comments on how
the chroot setting affects rsync's ability to look up the names of the users and
groups and what you can do about it.
--usermap=STRING, --groupmap=STRING
These options allow you to specify users and groups that should be mapped to other
values by the receiving side. The STRING is one or more FROM:TO pairs of values
separated by commas. Any matching FROM value from the sender is replaced with a TO
value from the receiver. You may specify usernames or user IDs for the FROM and TO
values, and the FROM value may also be a wild-card string, which will be matched
against the sender's names (wild-cards do NOT match against ID numbers, though see
below for why a '*' matches everything). You may instead specify a range of ID
numbers via an inclusive range: LOW-HIGH. For example:
--usermap=0-99:nobody,wayne:admin,*:normal --groupmap=usr:1,1:usr
The first match in the list is the one that is used. You should specify all your
user mappings using a single --usermap option, and/or all your group mappings using
a single --groupmap option.
Note that the sender's name for the 0 user and group are not transmitted to the
receiver, so you should either match these values using a 0, or use the names in
effect on the receiving side (typically "root"). All other FROM names match those
in use on the sending side. All TO names match those in use on the receiving side.
Any IDs that do not have a name on the sending side are treated as having an empty
name for the purpose of matching. This allows them to be matched via a "*" or
using an empty name. For instance:
--usermap=:nobody --groupmap=*:nobody
When the --numeric-ids option is used, the sender does not send any names, so all
the IDs are treated as having an empty name. This means that you will need to
specify numeric FROM values if you want to map these nameless IDs to different
values.
For the --usermap option to work, the receiver will need to be running as a super-
user (see also the --super and --fake-super options). For the --groupmap option to
work, the receiver will need to have permissions to set that group.
Starting with rsync 3.2.4, the --usermap option implies the --owner (-o) option
while the --groupmap option implies the --group (-g) option (since rsync needs to
have those options enabled for the mapping options to work).
An older rsync client may need to use -s to avoid a complaint about wildcard
characters, but a modern rsync handles this automatically.
--chown=USER:GROUP
This option forces all files to be owned by USER with group GROUP. This is a
simpler interface than using --usermap & --groupmap directly, but it is implemented
using those options internally so they cannot be mixed. If either the USER or
GROUP is empty, no mapping for the omitted user/group will occur. If GROUP is
empty, the trailing colon may be omitted, but if USER is empty, a leading colon
must be supplied.
If you specify "--chown=foo:bar", this is exactly the same as specifying
"--usermap=*:foo --groupmap=*:bar", only easier (and with the same implied --owner
and/or --group options).
An older rsync client may need to use -s to avoid a complaint about wildcard
characters, but a modern rsync handles this automatically.
--timeout=SECONDS
This option allows you to set a maximum I/O timeout in seconds. If no data is
transferred for the specified time then rsync will exit. The default is 0, which
means no timeout.
--contimeout=SECONDS
This option allows you to set the amount of time that rsync will wait for its
connection to an rsync daemon to succeed. If the timeout is reached, rsync exits
with an error.
--address=ADDRESS
By default rsync will bind to the wildcard address when connecting to an rsync
daemon. The --address option allows you to specify a specific IP address (or
hostname) to bind to.
See also the daemon version of the --address option.
--port=PORT
This specifies an alternate TCP port number to use rather than the default of 873.
This is only needed if you are using the double-colon (::) syntax to connect with
an rsync daemon (since the URL syntax has a way to specify the port as a part of
the URL).
See also the daemon version of the --port option.
--sockopts=OPTIONS
This option can provide endless fun for people who like to tune their systems to
the utmost degree. You can set all sorts of socket options which may make
transfers faster (or slower!). Read the manpage for the setsockopt() system call
for details on some of the options you may be able to set. By default no special
socket options are set. This only affects direct socket connections to a remote
rsync daemon.
See also the daemon version of the --sockopts option.
--blocking-io
This tells rsync to use blocking I/O when launching a remote shell transport. If
the remote shell is either rsh or remsh, rsync defaults to using blocking I/O,
otherwise it defaults to using non-blocking I/O. (Note that ssh prefers non-
blocking I/O.)
--outbuf=MODE
This sets the output buffering mode. The mode can be None (aka Unbuffered), Line,
or Block (aka Full). You may specify as little as a single letter for the mode,
and use upper or lower case.
The main use of this option is to change Full buffering to Line buffering when
rsync's output is going to a file or pipe.
--itemize-changes, -i
Requests a simple itemized list of the changes that are being made to each file,
including attribute changes. This is exactly the same as specifying --out-
format='%i %n%L'. If you repeat the option, unchanged files will also be output,
but only if the receiving rsync is at least version 2.6.7 (you can use -vv with
older versions of rsync, but that also turns on the output of other verbose
messages).
The "%i" escape has a cryptic output that is 11 letters long. The general format
is like the string YXcstpoguax, where Y is replaced by the type of update being
done, X is replaced by the file-type, and the other letters represent attributes
that may be output if they are being modified.
The update types that replace the Y are as follows:
o A < means that a file is being transferred to the remote host (sent).
o A > means that a file is being transferred to the local host (received).
o A c means that a local change/creation is occurring for the item (such as
the creation of a directory or the changing of a symlink, etc.).
o A h means that the item is a hard link to another item (requires --hard-
links).
o A . means that the item is not being updated (though it might have
attributes that are being modified).
o A * means that the rest of the itemized-output area contains a message (e.g.
"deleting").
The file-types that replace the X are: f for a file, a d for a directory, an L for
a symlink, a D for a device, and a S for a special file (e.g. named sockets and
fifos).
The other letters in the string indicate if some attributes of the file have
changed, as follows:
o "." - the attribute is unchanged.
o "+" - the file is newly created.
o " " - all the attributes are unchanged (all dots turn to spaces).
o "?" - the change is unknown (when the remote rsync is old).
o A letter indicates an attribute is being updated.
The attribute that is associated with each letter is as follows:
o A c means either that a regular file has a different checksum (requires
--checksum) or that a symlink, device, or special file has a changed value.
Note that if you are sending files to an rsync prior to 3.0.1, this change
flag will be present only for checksum-differing regular files.
o A s means the size of a regular file is different and will be updated by the
file transfer.
o A t means the modification time is different and is being updated to the
sender's value (requires --times). An alternate value of T means that the
modification time will be set to the transfer time, which happens when a
file/symlink/device is updated without --times and when a symlink is changed
and the receiver can't set its time. (Note: when using an rsync 3.0.0
client, you might see the s flag combined with t instead of the proper T
flag for this time-setting failure.)
o A p means the permissions are different and are being updated to the
sender's value (requires --perms).
o An o means the owner is different and is being updated to the sender's value
(requires --owner and super-user privileges).
o A g means the group is different and is being updated to the sender's value
(requires --group and the authority to set the group).
o
o A u|n|b indicates the following information:
u means the access (use) time is different and is being updated to
the sender's value (requires --atimes)
o n means the create time (newness) is different and is being updated
to the sender's value (requires --crtimes)
o b means that both the access and create times are being updated
o The a means that the ACL information is being changed.
o The x means that the extended attribute information is being changed.
One other output is possible: when deleting files, the "%i" will output the string
"*deleting" for each item that is being removed (assuming that you are talking to a
recent enough rsync that it logs deletions instead of outputting them as a verbose
message).
--out-format=FORMAT
This allows you to specify exactly what the rsync client outputs to the user on a
per-update basis. The format is a text string containing embedded single-character
escape sequences prefixed with a percent (%) character. A default format of "%n%L"
is assumed if either --info=name or -v is specified (this tells you just the name
of the file and, if the item is a link, where it points). For a full list of the
possible escape characters, see the log format setting in the rsyncd.conf manpage.
Specifying the --out-format option implies the --info=name option, which will
mention each file, dir, etc. that gets updated in a significant way (a transferred
file, a recreated symlink/device, or a touched directory). In addition, if the
itemize-changes escape (%i) is included in the string (e.g. if the --itemize-
changes option was used), the logging of names increases to mention any item that
is changed in any way (as long as the receiving side is at least 2.6.4). See the
--itemize-changes option for a description of the output of "%i".
Rsync will output the out-format string prior to a file's transfer unless one of
the transfer-statistic escapes is requested, in which case the logging is done at
the end of the file's transfer. When this late logging is in effect and --progress
is also specified, rsync will also output the name of the file being transferred
prior to its progress information (followed, of course, by the out-format output).
--log-file=FILE
This option causes rsync to log what it is doing to a file. This is similar to the
logging that a daemon does, but can be requested for the client side and/or the
server side of a non-daemon transfer. If specified as a client option, transfer
logging will be enabled with a default format of "%i %n%L". See the --log-file-
format option if you wish to override this.
Here's an example command that requests the remote side to log what is happening:
rsync -av --remote-option=--log-file=/tmp/rlog src/ dest/
This is very useful if you need to debug why a connection is closing unexpectedly.
See also the daemon version of the --log-file option.
--log-file-format=FORMAT
This allows you to specify exactly what per-update logging is put into the file
specified by the --log-file option (which must also be specified for this option to
have any effect). If you specify an empty string, updated files will not be
mentioned in the log file. For a list of the possible escape characters, see the
log format setting in the rsyncd.conf manpage.
The default FORMAT used if --log-file is specified and this option is not is '%i
%n%L'.
See also the daemon version of the --log-file-format option.
--stats
This tells rsync to print a verbose set of statistics on the file transfer,
allowing you to tell how effective rsync's delta-transfer algorithm is for your
data. This option is equivalent to --info=stats2 if combined with 0 or 1 -v
options, or --info=stats3 if combined with 2 or more -v options.
The current statistics are as follows:
o Number of files is the count of all "files" (in the generic sense), which
includes directories, symlinks, etc. The total count will be followed by a
list of counts by filetype (if the total is non-zero). For example: "(reg:
5, dir: 3, link: 2, dev: 1, special: 1)" lists the totals for regular files,
directories, symlinks, devices, and special files. If any of value is 0, it
is completely omitted from the list.
o Number of created files is the count of how many "files" (generic sense)
were created (as opposed to updated). The total count will be followed by a
list of counts by filetype (if the total is non-zero).
o Number of deleted files is the count of how many "files" (generic sense)
were deleted. The total count will be followed by a list of counts by
filetype (if the total is non-zero). Note that this line is only output if
deletions are in effect, and only if protocol 31 is being used (the default
for rsync 3.1.x).
o Number of regular files transferred is the count of normal files that were
updated via rsync's delta-transfer algorithm, which does not include dirs,
symlinks, etc. Note that rsync 3.1.0 added the word "regular" into this
heading.
o Total file size is the total sum of all file sizes in the transfer. This
does not count any size for directories or special files, but does include
the size of symlinks.
o Total transferred file size is the total sum of all files sizes for just the
transferred files.
o Literal data is how much unmatched file-update data we had to send to the
receiver for it to recreate the updated files.
o Matched data is how much data the receiver got locally when recreating the
updated files.
o File list size is how big the file-list data was when the sender sent it to
the receiver. This is smaller than the in-memory size for the file list due
to some compressing of duplicated data when rsync sends the list.
o File list generation time is the number of seconds that the sender spent
creating the file list. This requires a modern rsync on the sending side
for this to be present.
o File list transfer time is the number of seconds that the sender spent
sending the file list to the receiver.
o Total bytes sent is the count of all the bytes that rsync sent from the
client side to the server side.
o Total bytes received is the count of all non-message bytes that rsync
received by the client side from the server side. "Non-message" bytes means
that we don't count the bytes for a verbose message that the server sent to
us, which makes the stats more consistent.
--8-bit-output, -8
This tells rsync to leave all high-bit characters unescaped in the output instead
of trying to test them to see if they're valid in the current locale and escaping
the invalid ones. All control characters (but never tabs) are always escaped,
regardless of this option's setting.
The escape idiom that started in 2.6.7 is to output a literal backslash (\) and a
hash (#), followed by exactly 3 octal digits. For example, a newline would output
as "\#012". A literal backslash that is in a filename is not escaped unless it is
followed by a hash and 3 digits (0-9).
--human-readable, -h
Output numbers in a more human-readable format. There are 3 possible levels:
1. output numbers with a separator between each set of 3 digits (either a comma
or a period, depending on if the decimal point is represented by a period or
a comma).
2. output numbers in units of 1000 (with a character suffix for larger units --
see below).
3. output numbers in units of 1024.
The default is human-readable level 1. Each -h option increases the level by one.
You can take the level down to 0 (to output numbers as pure digits) by specifying
the --no-human-readable (--no-h) option.
The unit letters that are appended in levels 2 and 3 are: K (kilo), M (mega), G
(giga), T (tera), or P (peta). For example, a 1234567-byte file would output as
1.23M in level-2 (assuming that a period is your local decimal point).
Backward compatibility note: versions of rsync prior to 3.1.0 do not support human-
readable level 1, and they default to level 0. Thus, specifying one or two -h
options will behave in a comparable manner in old and new versions as long as you
didn't specify a --no-h option prior to one or more -h options. See the --list-
only option for one difference.
--partial
By default, rsync will delete any partially transferred file if the transfer is
interrupted. In some circumstances it is more desirable to keep partially
transferred files. Using the --partial option tells rsync to keep the partial file
which should make a subsequent transfer of the rest of the file much faster.
--partial-dir=DIR
This option modifies the behavior of the --partial option while also implying that
it be enabled. This enhanced partial-file method puts any partially transferred
files into the specified DIR instead of writing the partial file out to the
destination file. On the next transfer, rsync will use a file found in this dir as
data to speed up the resumption of the transfer and then delete it after it has
served its purpose.
Note that if --whole-file is specified (or implied), any partial-dir files that are
found for a file that is being updated will simply be removed (since rsync is
sending files without using rsync's delta-transfer algorithm).
Rsync will create the DIR if it is missing, but just the last dir -- not the whole
path. This makes it easy to use a relative path (such as "--partial-dir=.rsync-
partial") to have rsync create the partial-directory in the destination file's
directory when it is needed, and then remove it again when the partial file is
deleted. Note that this directory removal is only done for a relative pathname, as
it is expected that an absolute path is to a directory that is reserved for
partial-dir work.
If the partial-dir value is not an absolute path, rsync will add an exclude rule at
the end of all your existing excludes. This will prevent the sending of any
partial-dir files that may exist on the sending side, and will also prevent the
untimely deletion of partial-dir items on the receiving side. An example: the
above --partial-dir option would add the equivalent of this "perishable" exclude at
the end of any other filter rules: -f '-p .rsync-partial/'
If you are supplying your own exclude rules, you may need to add your own
exclude/hide/protect rule for the partial-dir because:
1. the auto-added rule may be ineffective at the end of your other rules, or
2. you may wish to override rsync's exclude choice.
For instance, if you want to make rsync clean-up any left-over partial-dirs that
may be lying around, you should specify --delete-after and add a "risk" filter
rule, e.g. -f 'R .rsync-partial/'. Avoid using --delete-before or --delete-during
unless you don't need rsync to use any of the left-over partial-dir data during the
current run.
IMPORTANT: the --partial-dir should not be writable by other users or it is a
security risk! E.g. AVOID "/tmp"!
You can also set the partial-dir value the RSYNC_PARTIAL_DIR environment variable.
Setting this in the environment does not force --partial to be enabled, but rather
it affects where partial files go when --partial is specified. For instance,
instead of using --partial-dir=.rsync-tmp along with --progress, you could set
RSYNC_PARTIAL_DIR=.rsync-tmp in your environment and then use the -P option to turn
on the use of the .rsync-tmp dir for partial transfers. The only times that the
--partial option does not look for this environment value are:
1. when --inplace was specified (since --inplace conflicts with --partial-dir),
and
2. when --delay-updates was specified (see below).
When a modern rsync resumes the transfer of a file in the partial-dir, that partial
file is now updated in-place instead of creating yet another tmp-file copy (so it
maxes out at dest + tmp instead of dest + partial + tmp). This requires both ends
of the transfer to be at least version 3.2.0.
For the purposes of the daemon-config's "refuse options" setting, --partial-dir
does not imply --partial. This is so that a refusal of the --partial option can be
used to disallow the overwriting of destination files with a partial transfer,
while still allowing the safer idiom provided by --partial-dir.
--delay-updates
This option puts the temporary file from each updated file into a holding directory
until the end of the transfer, at which time all the files are renamed into place
in rapid succession. This attempts to make the updating of the files a little more
atomic. By default the files are placed into a directory named .~tmp~ in each
file's destination directory, but if you've specified the --partial-dir option,
that directory will be used instead. See the comments in the --partial-dir section
for a discussion of how this .~tmp~ dir will be excluded from the transfer, and
what you can do if you want rsync to cleanup old .~tmp~ dirs that might be lying
around. Conflicts with --inplace and --append.
This option implies --no-inc-recursive since it needs the full file list in memory
in order to be able to iterate over it at the end.
This option uses more memory on the receiving side (one bit per file transferred)
and also requires enough free disk space on the receiving side to hold an
additional copy of all the updated files. Note also that you should not use an
absolute path to --partial-dir unless:
1. there is no chance of any of the files in the transfer having the same name
(since all the updated files will be put into a single directory if the path
is absolute), and
2. there are no mount points in the hierarchy (since the delayed updates will
fail if they can't be renamed into place).
See also the "atomic-rsync" python script in the "support" subdir for an update
algorithm that is even more atomic (it uses --link-dest and a parallel hierarchy of
files).
--prune-empty-dirs, -m
This option tells the receiving rsync to get rid of empty directories from the
file-list, including nested directories that have no non-directory children. This
is useful for avoiding the creation of a bunch of useless directories when the
sending rsync is recursively scanning a hierarchy of files using
include/exclude/filter rules.
This option can still leave empty directories on the receiving side if you make use
of TRANSFER_RULES.
Because the file-list is actually being pruned, this option also affects what
directories get deleted when a delete is active. However, keep in mind that
excluded files and directories can prevent existing items from being deleted due to
an exclude both hiding source files and protecting destination files. See the
perishable filter-rule option for how to avoid this.
You can prevent the pruning of certain empty directories from the file-list by
using a global "protect" filter. For instance, this option would ensure that the
directory "emptydir" was kept in the file-list:
--filter 'protect emptydir/'
Here's an example that copies all .pdf files in a hierarchy, only creating the
necessary destination directories to hold the .pdf files, and ensures that any
superfluous files and directories in the destination are removed (note the hide
filter of non-directories being used instead of an exclude):
rsync -avm --del --include='*.pdf' -f 'hide,! */' src/ dest
If you didn't want to remove superfluous destination files, the more time-honored
options of --include='*/' --exclude='*' would work fine in place of the hide-filter
(if that is more natural to you).
--progress
This option tells rsync to print information showing the progress of the transfer.
This gives a bored user something to watch. With a modern rsync this is the same
as specifying --info=flist2,name,progress, but any user-supplied settings for those
info flags takes precedence (e.g. --info=flist0 --progress).
While rsync is transferring a regular file, it updates a progress line that looks
like this:
782448 63% 110.64kB/s 0:00:04
In this example, the receiver has reconstructed 782448 bytes or 63% of the sender's
file, which is being reconstructed at a rate of 110.64 kilobytes per second, and
the transfer will finish in 4 seconds if the current rate is maintained until the
end.
These statistics can be misleading if rsync's delta-transfer algorithm is in use.
For example, if the sender's file consists of the basis file followed by additional
data, the reported rate will probably drop dramatically when the receiver gets to
the literal data, and the transfer will probably take much longer to finish than
the receiver estimated as it was finishing the matched part of the file.
When the file transfer finishes, rsync replaces the progress line with a summary
line that looks like this:
1,238,099 100% 146.38kB/s 0:00:08 (xfr#5, to-chk=169/396)
In this example, the file was 1,238,099 bytes long in total, the average rate of
transfer for the whole file was 146.38 kilobytes per second over the 8 seconds that
it took to complete, it was the 5th transfer of a regular file during the current
rsync session, and there are 169 more files for the receiver to check (to see if
they are up-to-date or not) remaining out of the 396 total files in the file-list.
In an incremental recursion scan, rsync won't know the total number of files in the
file-list until it reaches the ends of the scan, but since it starts to transfer
files during the scan, it will display a line with the text "ir-chk" (for
incremental recursion check) instead of "to-chk" until the point that it knows the
full size of the list, at which point it will switch to using "to-chk". Thus,
seeing "ir-chk" lets you know that the total count of files in the file list is
still going to increase (and each time it does, the count of files left to check
will increase by the number of the files added to the list).
-P The -P option is equivalent to "--partial --progress". Its purpose is to make it
much easier to specify these two options for a long transfer that may be
interrupted.
There is also a --info=progress2 option that outputs statistics based on the whole
transfer, rather than individual files. Use this flag without outputting a
filename (e.g. avoid -v or specify --info=name0) if you want to see how the
transfer is doing without scrolling the screen with a lot of names. (You don't need
to specify the --progress option in order to use --info=progress2.)
Finally, you can get an instant progress report by sending rsync a signal of either
SIGINFO or SIGVTALRM. On BSD systems, a SIGINFO is generated by typing a Ctrl+T
(Linux doesn't currently support a SIGINFO signal). When the client-side process
receives one of those signals, it sets a flag to output a single progress report
which is output when the current file transfer finishes (so it may take a little
time if a big file is being handled when the signal arrives). A filename is output
(if needed) followed by the --info=progress2 format of progress info. If you don't
know which of the 3 rsync processes is the client process, it's OK to signal all of
them (since the non-client processes ignore the signal).
CAUTION: sending SIGVTALRM to an older rsync (pre-3.2.0) will kill it.
--password-file=FILE
This option allows you to provide a password for accessing an rsync daemon via a
file or via standard input if FILE is -. The file should contain just the password
on the first line (all other lines are ignored). Rsync will exit with an error if
FILE is world readable or if a root-run rsync command finds a non-root-owned file.
This option does not supply a password to a remote shell transport such as ssh; to
learn how to do that, consult the remote shell's documentation. When accessing an
rsync daemon using a remote shell as the transport, this option only comes into
effect after the remote shell finishes its authentication (i.e. if you have also
specified a password in the daemon's config file).
--early-input=FILE
This option allows rsync to send up to 5K of data to the "early exec" script on its
stdin. One possible use of this data is to give the script a secret that can be
used to mount an encrypted filesystem (which you should unmount in the the "post-
xfer exec" script).
The daemon must be at least version 3.2.1.
--list-only
This option will cause the source files to be listed instead of transferred. This
option is inferred if there is a single source arg and no destination specified, so
its main uses are:
1. to turn a copy command that includes a destination arg into a file-listing
command, or
2. to be able to specify more than one source arg. Note: be sure to include
the destination.
CAUTION: keep in mind that a source arg with a wild-card is expanded by the shell
into multiple args, so it is never safe to try to specify a single wild-card arg to
try to infer this option. A safe example is:
rsync -av --list-only foo* dest/
This option always uses an output format that looks similar to this:
drwxrwxr-x 4,096 2022/09/30 12:53:11 support
-rw-rw-r-- 80 2005/01/11 10:37:37 support/Makefile
The only option that affects this output style is (as of 3.1.0) the --human-
readable (-h) option. The default is to output sizes as byte counts with digit
separators (in a 14-character-width column). Specifying at least one -h option
makes the sizes output with unit suffixes. If you want old-style bytecount sizes
without digit separators (and an 11-character-width column) use --no-h.
Compatibility note: when requesting a remote listing of files from an rsync that is
version 2.6.3 or older, you may encounter an error if you ask for a non-recursive
listing. This is because a file listing implies the --dirs option w/o --recursive,
and older rsyncs don't have that option. To avoid this problem, either specify the
--no-dirs option (if you don't need to expand a directory's content), or turn on
recursion and exclude the content of subdirectories: -r --exclude='/*/*'.
--bwlimit=RATE
This option allows you to specify the maximum transfer rate for the data sent over
the socket, specified in units per second. The RATE value can be suffixed with a
string to indicate a size multiplier, and may be a fractional value (e.g.
--bwlimit=1.5m). If no suffix is specified, the value will be assumed to be in
units of 1024 bytes (as if "K" or "KiB" had been appended). See the --max-size
option for a description of all the available suffixes. A value of 0 specifies no
limit.
For backward-compatibility reasons, the rate limit will be rounded to the nearest
KiB unit, so no rate smaller than 1024 bytes per second is possible.
Rsync writes data over the socket in blocks, and this option both limits the size
of the blocks that rsync writes, and tries to keep the average transfer rate at the
requested limit. Some burstiness may be seen where rsync writes out a block of
data and then sleeps to bring the average rate into compliance.
Due to the internal buffering of data, the --progress option may not be an accurate
reflection on how fast the data is being sent. This is because some files can show
up as being rapidly sent when the data is quickly buffered, while other can show up
as very slow when the flushing of the output buffer occurs. This may be fixed in a
future version.
See also the daemon version of the --bwlimit option.
--stop-after=MINS, (--time-limit=MINS)
This option tells rsync to stop copying when the specified number of minutes has
elapsed.
For maximal flexibility, rsync does not communicate this option to the remote rsync
since it is usually enough that one side of the connection quits as specified.
This allows the option's use even when only one side of the connection supports it.
You can tell the remote side about the time limit using --remote-option (-M),
should the need arise.
The --time-limit version of this option is deprecated.
--stop-at=y-m-dTh:m
This option tells rsync to stop copying when the specified point in time has been
reached. The date & time can be fully specified in a numeric format of year-month-
dayThour:minute (e.g. 2000-12-31T23:59) in the local timezone. You may choose to
separate the date numbers using slashes instead of dashes.
The value can also be abbreviated in a variety of ways, such as specifying a
2-digit year and/or leaving off various values. In all cases, the value will be
taken to be the next possible point in time where the supplied information matches.
If the value specifies the current time or a past time, rsync exits with an error.
For example, "1-30" specifies the next January 30th (at midnight local time),
"14:00" specifies the next 2 P.M., "1" specifies the next 1st of the month at
midnight, "31" specifies the next month where we can stop on its 31st day, and
":59" specifies the next 59th minute after the hour.
For maximal flexibility, rsync does not communicate this option to the remote rsync
since it is usually enough that one side of the connection quits as specified.
This allows the option's use even when only one side of the connection supports it.
You can tell the remote side about the time limit using --remote-option (-M),
should the need arise. Do keep in mind that the remote host may have a different
default timezone than your local host.
--fsync
Cause the receiving side to fsync each finished file. This may slow down the
transfer, but can help to provide peace of mind when updating critical files.
--write-batch=FILE
Record a file that can later be applied to another identical destination with
--read-batch. See the "BATCH MODE" section for details, and also the --only-write-
batch option.
This option overrides the negotiated checksum & compress lists and always
negotiates a choice based on old-school md5/md4/zlib choices. If you want a more
modern choice, use the --checksum-choice (--cc) and/or --compress-choice (--zc)
options.
--only-write-batch=FILE
Works like --write-batch, except that no updates are made on the destination system
when creating the batch. This lets you transport the changes to the destination
system via some other means and then apply the changes via --read-batch.
Note that you can feel free to write the batch directly to some portable media: if
this media fills to capacity before the end of the transfer, you can just apply
that partial transfer to the destination and repeat the whole process to get the
rest of the changes (as long as you don't mind a partially updated destination
system while the multi-update cycle is happening).
Also note that you only save bandwidth when pushing changes to a remote system
because this allows the batched data to be diverted from the sender into the batch
file without having to flow over the wire to the receiver (when pulling, the sender
is remote, and thus can't write the batch).
--read-batch=FILE
Apply all of the changes stored in FILE, a file previously generated by --write-
batch. If FILE is -, the batch data will be read from standard input. See the
"BATCH MODE" section for details.
--protocol=NUM
Force an older protocol version to be used. This is useful for creating a batch
file that is compatible with an older version of rsync. For instance, if rsync
2.6.4 is being used with the --write-batch option, but rsync 2.6.3 is what will be
used to run the --read-batch option, you should use "--protocol=28" when creating
the batch file to force the older protocol version to be used in the batch file
(assuming you can't upgrade the rsync on the reading system).
--iconv=CONVERT_SPEC
Rsync can convert filenames between character sets using this option. Using a
CONVERT_SPEC of "." tells rsync to look up the default character-set via the locale
setting. Alternately, you can fully specify what conversion to do by giving a
local and a remote charset separated by a comma in the order --iconv=LOCAL,REMOTE,
e.g. --iconv=utf8,iso88591. This order ensures that the option will stay the same
whether you're pushing or pulling files. Finally, you can specify either --no-
iconv or a CONVERT_SPEC of "-" to turn off any conversion. The default setting of
this option is site-specific, and can also be affected via the RSYNC_ICONV
environment variable.
For a list of what charset names your local iconv library supports, you can run
"iconv --list".
If you specify the --secluded-args (-s) option, rsync will translate the filenames
you specify on the command-line that are being sent to the remote host. See also
the --files-from option.
Note that rsync does not do any conversion of names in filter files (including
include/exclude files). It is up to you to ensure that you're specifying matching
rules that can match on both sides of the transfer. For instance, you can specify
extra include/exclude rules if there are filename differences on the two sides that
need to be accounted for.
When you pass an --iconv option to an rsync daemon that allows it, the daemon uses
the charset specified in its "charset" configuration parameter regardless of the
remote charset you actually pass. Thus, you may feel free to specify just the
local charset for a daemon transfer (e.g. --iconv=utf8).
--ipv4, -4 or --ipv6, -6
Tells rsync to prefer IPv4/IPv6 when creating sockets or running ssh. This affects
sockets that rsync has direct control over, such as the outgoing socket when
directly contacting an rsync daemon, as well as the forwarding of the -4 or -6
option to ssh when rsync can deduce that ssh is being used as the remote shell.
For other remote shells you'll need to specify the "--rsh SHELL -4" option directly
(or whatever IPv4/IPv6 hint options it uses).
See also the daemon version of these options.
If rsync was compiled without support for IPv6, the --ipv6 option will have no
effect. The rsync --version output will contain "no IPv6" if is the case.
--checksum-seed=NUM
Set the checksum seed to the integer NUM. This 4 byte checksum seed is included in
each block and MD4 file checksum calculation (the more modern MD5 file checksums
don't use a seed). By default the checksum seed is generated by the server and
defaults to the current time(). This option is used to set a specific checksum
seed, which is useful for applications that want repeatable block checksums, or in
the case where the user wants a more random checksum seed. Setting NUM to 0 causes
rsync to use the default of time() for checksum seed.
DAEMON OPTIONS
The options allowed when starting an rsync daemon are as follows:
--daemon
This tells rsync that it is to run as a daemon. The daemon you start running may
be accessed using an rsync client using the host::module or rsync://host/module/
syntax.
If standard input is a socket then rsync will assume that it is being run via
inetd, otherwise it will detach from the current terminal and become a background
daemon. The daemon will read the config file (rsyncd.conf) on each connect made by
a client and respond to requests accordingly.
See the rsyncd.conf(5) manpage for more details.
--address=ADDRESS
By default rsync will bind to the wildcard address when run as a daemon with the
--daemon option. The --address option allows you to specify a specific IP address
(or hostname) to bind to. This makes virtual hosting possible in conjunction with
the --config option.
See also the address global option in the rsyncd.conf manpage and the client
version of the --address option.
--bwlimit=RATE
This option allows you to specify the maximum transfer rate for the data the daemon
sends over the socket. The client can still specify a smaller --bwlimit value, but
no larger value will be allowed.
See the client version of the --bwlimit option for some extra details.
--config=FILE
This specifies an alternate config file than the default. This is only relevant
when --daemon is specified. The default is /etc/rsyncd.conf unless the daemon is
running over a remote shell program and the remote user is not the super-user; in
that case the default is rsyncd.conf in the current directory (typically $HOME).
--dparam=OVERRIDE, -M
This option can be used to set a daemon-config parameter when starting up rsync in
daemon mode. It is equivalent to adding the parameter at the end of the global
settings prior to the first module's definition. The parameter names can be
specified without spaces, if you so desire. For instance:
rsync --daemon -M pidfile=/path/rsync.pid
--no-detach
When running as a daemon, this option instructs rsync to not detach itself and
become a background process. This option is required when running as a service on
Cygwin, and may also be useful when rsync is supervised by a program such as
daemontools or AIX's System Resource Controller. --no-detach is also recommended
when rsync is run under a debugger. This option has no effect if rsync is run from
inetd or sshd.
--port=PORT
This specifies an alternate TCP port number for the daemon to listen on rather than
the default of 873.
See also the client version of the --port option and the port global setting in the
rsyncd.conf manpage.
--log-file=FILE
This option tells the rsync daemon to use the given log-file name instead of using
the "log file" setting in the config file.
See also the client version of the --log-file option.
--log-file-format=FORMAT
This option tells the rsync daemon to use the given FORMAT string instead of using
the "log format" setting in the config file. It also enables "transfer logging"
unless the string is empty, in which case transfer logging is turned off.
See also the client version of the --log-file-format option.
--sockopts
This overrides the socket options setting in the rsyncd.conf file and has the same
syntax.
See also the client version of the --sockopts option.
--verbose, -v
This option increases the amount of information the daemon logs during its startup
phase. After the client connects, the daemon's verbosity level will be controlled
by the options that the client used and the "max verbosity" setting in the module's
config section.
See also the client version of the --verbose option.
--ipv4, -4 or --ipv6, -6
Tells rsync to prefer IPv4/IPv6 when creating the incoming sockets that the rsync
daemon will use to listen for connections. One of these options may be required in
older versions of Linux to work around an IPv6 bug in the kernel (if you see an
"address already in use" error when nothing else is using the port, try specifying
--ipv6 or --ipv4 when starting the daemon).
See also the client version of these options.
If rsync was compiled without support for IPv6, the --ipv6 option will have no
effect. The rsync --version output will contain "no IPv6" if is the case.
--help, -h
When specified after --daemon, print a short help page describing the options
available for starting an rsync daemon.
FILTER RULES
The filter rules allow for custom control of several aspects of how files are handled:
o Control which files the sending side puts into the file list that describes the
transfer hierarchy
o Control which files the receiving side protects from deletion when the file is not
in the sender's file list
o Control which extended attribute names are skipped when copying xattrs
The rules are either directly specified via option arguments or they can be read in from
one or more files. The filter-rule files can even be a part of the hierarchy of files
being copied, affecting different parts of the tree in different ways.
SIMPLE INCLUDE/EXCLUDE RULES
We will first cover the basics of how include & exclude rules affect what files are
transferred, ignoring any deletion side-effects. Filter rules mainly affect the contents
of directories that rsync is "recursing" into, but they can also affect a top-level item
in the transfer that was specified as a argument.
The default for any unmatched file/dir is for it to be included in the transfer, which
puts the file/dir into the sender's file list. The use of an exclude rule causes one or
more matching files/dirs to be left out of the sender's file list. An include rule can be
used to limit the effect of an exclude rule that is matching too many files.
The order of the rules is important because the first rule that matches is the one that
takes effect. Thus, if an early rule excludes a file, no include rule that comes after it
can have any effect. This means that you must place any include overrides somewhere prior
to the exclude that it is intended to limit.
When a directory is excluded, all its contents and sub-contents are also excluded. The
sender doesn't scan through any of it at all, which can save a lot of time when skipping
large unneeded sub-trees.
It is also important to understand that the include/exclude rules are applied to every
file and directory that the sender is recursing into. Thus, if you want a particular deep
file to be included, you have to make sure that none of the directories that must be
traversed on the way down to that file are excluded or else the file will never be
discovered to be included. As an example, if the directory "a/path" was given as a
transfer argument and you want to ensure that the file "a/path/down/deep/wanted.txt" is a
part of the transfer, then the sender must not exclude the directories "a/path",
"a/path/down", or "a/path/down/deep" as it makes it way scanning through the file tree.
When you are working on the rules, it can be helpful to ask rsync to tell you what is
being excluded/included and why. Specifying --debug=FILTER or (when pulling files)
-M--debug=FILTER turns on level 1 of the FILTER debug information that will output a
message any time that a file or directory is included or excluded and which rule it
matched. Beginning in 3.2.4 it will also warn if a filter rule has trailing whitespace,
since an exclude of "foo " (with a trailing space) will not exclude a file named "foo".
Exclude and include rules can specify wildcard PATTERN MATCHING RULES (similar to shell
wildcards) that allow you to match things like a file suffix or a portion of a filename.
A rule can be limited to only affecting a directory by putting a trailing slash onto the
filename.
SIMPLE INCLUDE/EXCLUDE EXAMPLE
With the following file tree created on the sending side:
mkdir x/
touch x/file.txt
mkdir x/y/
touch x/y/file.txt
touch x/y/zzz.txt
mkdir x/z/
touch x/z/file.txt
Then the following rsync command will transfer the file "x/y/file.txt" and the directories
needed to hold it, resulting in the path "/tmp/x/y/file.txt" existing on the remote host:
rsync -ai -f'+ x/' -f'+ x/y/' -f'+ x/y/file.txt' -f'- *' x host:/tmp/
Aside: this copy could also have been accomplished using the -R option (though the 2
commands behave differently if deletions are enabled):
rsync -aiR x/y/file.txt host:/tmp/
The following command does not need an include of the "x" directory because it is not a
part of the transfer (note the traililng slash). Running this command would copy just
"/tmp/x/file.txt" because the "y" and "z" dirs get excluded:
rsync -ai -f'+ file.txt' -f'- *' x/ host:/tmp/x/
This command would omit the zzz.txt file while copying "x" and everything else it
contains:
rsync -ai -f'- zzz.txt' x host:/tmp/
FILTER RULES WHEN DELETING
By default the include & exclude filter rules affect both the sender (as it creates its
file list) and the receiver (as it creates its file lists for calculating deletions). If
no delete option is in effect, the receiver skips creating the delete-related file lists.
This two-sided default can be manually overridden so that you are only specifying sender
rules or receiver rules, as described in the FILTER RULES IN DEPTH section.
When deleting, an exclude protects a file from being removed on the receiving side while
an include overrides that protection (putting the file at risk of deletion). The default
is for a file to be at risk -- its safety depends on it matching a corresponding file from
the sender.
An example of the two-sided exclude effect can be illustrated by the copying of a C
development directory between 2 systems. When doing a touch-up copy, you might want to
skip copying the built executable and the .o files (sender hide) so that the receiving
side can build their own and not lose any object files that are already correct (receiver
protect). For instance:
rsync -ai --del -f'- *.o' -f'- cmd' src host:/dest/
Note that using -f'-p *.o' is even better than -f'- *.o' if there is a chance that the
directory structure may have changed. The "p" modifier is discussed in FILTER RULE
MODIFIERS.
One final note, if your shell doesn't mind unexpanded wildcards, you could simplify the
typing of the filter options by using an underscore in place of the space and leaving off
the quotes. For instance, -f -_*.o -f -_cmd (and similar) could be used instead of the
filter options above.
FILTER RULES IN DEPTH
Rsync supports old-style include/exclude rules and new-style filter rules. The older
rules are specified using --include and --exclude as well as the --include-from and
--exclude-from. These are limited in behavior but they don't require a "-" or "+" prefix.
An old-style exclude rule is turned into a "- name" filter rule (with no modifiers) and an
old-style include rule is turned into a "+ name" filter rule (with no modifiers).
Rsync builds an ordered list of filter rules as specified on the command-line and/or read-
in from files. New style filter rules have the following syntax:
RULE [PATTERN_OR_FILENAME]
RULE,MODIFIERS [PATTERN_OR_FILENAME]
You have your choice of using either short or long RULE names, as described below. If you
use a short-named rule, the ',' separating the RULE from the MODIFIERS is optional. The
PATTERN or FILENAME that follows (when present) must come after either a single space or
an underscore (_). Any additional spaces and/or underscores are considered to be a part of
the pattern name. Here are the available rule prefixes:
exclude, '-'
specifies an exclude pattern that (by default) is both a hide and a protect.
include, '+'
specifies an include pattern that (by default) is both a show and a risk.
merge, '.'
specifies a merge-file on the client side to read for more rules.
dir-merge, ':'
specifies a per-directory merge-file. Using this kind of filter rule requires that
you trust the sending side's filter checking, so it has the side-effect mentioned
under the --trust-sender option.
hide, 'H'
specifies a pattern for hiding files from the transfer. Equivalent to a sender-
only exclude, so -f'H foo' could also be specified as -f'-s foo'.
show, 'S'
files that match the pattern are not hidden. Equivalent to a sender-only include,
so -f'S foo' could also be specified as -f'+s foo'.
protect, 'P'
specifies a pattern for protecting files from deletion. Equivalent to a receiver-
only exclude, so -f'P foo' could also be specified as -f'-r foo'.
risk, 'R'
files that match the pattern are not protected. Equivalent to a receiver-only
include, so -f'R foo' could also be specified as -f'+r foo'.
clear, '!'
clears the current include/exclude list (takes no arg)
When rules are being read from a file (using merge or dir-merge), empty lines are ignored,
as are whole-line comments that start with a '#' (filename rules that contain a hash
character are unaffected).
Note also that the --filter, --include, and --exclude options take one rule/pattern each.
To add multiple ones, you can repeat the options on the command-line, use the merge-file
syntax of the --filter option, or the --include-from / --exclude-from options.
PATTERN MATCHING RULES
Most of the rules mentioned above take an argument that specifies what the rule should
match. If rsync is recursing through a directory hierarchy, keep in mind that each
pattern is matched against the name of every directory in the descent path as rsync finds
the filenames to send.
The matching rules for the pattern argument take several forms:
o If a pattern contains a / (not counting a trailing slash) or a "**" (which can
match a slash), then the pattern is matched against the full pathname, including
any leading directories within the transfer. If the pattern doesn't contain a
(non-trailing) / or a "**", then it is matched only against the final component of
the filename or pathname. For example, foo means that the final path component must
be "foo" while foo/bar would match the last 2 elements of the path (as long as both
elements are within the transfer).
o A pattern that ends with a / only matches a directory, not a regular file, symlink,
or device.
o A pattern that starts with a / is anchored to the start of the transfer path
instead of the end. For example, /foo/** or /foo/bar/** match only leading
elements in the path. If the rule is read from a per-directory filter file, the
transfer path being matched will begin at the level of the filter file instead of
the top of the transfer. See the section on ANCHORING INCLUDE/EXCLUDE PATTERNS for
a full discussion of how to specify a pattern that matches at the root of the
transfer.
Rsync chooses between doing a simple string match and wildcard matching by checking if the
pattern contains one of these three wildcard characters: '*', '?', and '[' :
o a '?' matches any single character except a slash (/).
o a '*' matches zero or more non-slash characters.
o a '**' matches zero or more characters, including slashes.
o a '[' introduces a character class, such as [a-z] or [[:alpha:]], that must match
one character.
o a trailing *** in the pattern is a shorthand that allows you to match a directory
and all its contents using a single rule. For example, specifying "dir_name/***"
will match both the "dir_name" directory (as if "dir_name/" had been specified) and
everything in the directory (as if "dir_name/**" had been specified).
o a backslash can be used to escape a wildcard character, but it is only interpreted
as an escape character if at least one wildcard character is present in the match
pattern. For instance, the pattern "foo\bar" matches that single backslash
literally, while the pattern "foo\bar*" would need to be changed to "foo\\bar*" to
avoid the "\b" becoming just "b".
Here are some examples of exclude/include matching:
o Option -f'- *.o' would exclude all filenames ending with .o
o Option -f'- /foo' would exclude a file (or directory) named foo in the transfer-
root directory
o Option -f'- foo/' would exclude any directory named foo
o Option -f'- foo/*/bar' would exclude any file/dir named bar which is at two levels
below a directory named foo (if foo is in the transfer)
o Option -f'- /foo/**/bar' would exclude any file/dir named bar that was two or more
levels below a top-level directory named foo (note that /foo/bar is not excluded by
this)
o Options -f'+ */' -f'+ *.c' -f'- *' would include all directories and .c source
files but nothing else
o Options -f'+ foo/' -f'+ foo/bar.c' -f'- *' would include only the foo directory and
foo/bar.c (the foo directory must be explicitly included or it would be excluded by
the "- *")
FILTER RULE MODIFIERS
The following modifiers are accepted after an include (+) or exclude (-) rule:
o A / specifies that the include/exclude rule should be matched against the absolute
pathname of the current item. For example, -f'-/ /etc/passwd' would exclude the
passwd file any time the transfer was sending files from the "/etc" directory, and
"-/ subdir/foo" would always exclude "foo" when it is in a dir named "subdir", even
if "foo" is at the root of the current transfer.
o A ! specifies that the include/exclude should take effect if the pattern fails to
match. For instance, -f'-! */' would exclude all non-directories.
o A C is used to indicate that all the global CVS-exclude rules should be inserted as
excludes in place of the "-C". No arg should follow.
o An s is used to indicate that the rule applies to the sending side. When a rule
affects the sending side, it affects what files are put into the sender's file
list. The default is for a rule to affect both sides unless --delete-excluded was
specified, in which case default rules become sender-side only. See also the hide
(H) and show (S) rules, which are an alternate way to specify sending-side
includes/excludes.
o An r is used to indicate that the rule applies to the receiving side. When a rule
affects the receiving side, it prevents files from being deleted. See the s
modifier for more info. See also the protect (P) and risk (R) rules, which are an
alternate way to specify receiver-side includes/excludes.
o A p indicates that a rule is perishable, meaning that it is ignored in directories
that are being deleted. For instance, the --cvs-exclude (-C) option's default
rules that exclude things like "CVS" and "*.o" are marked as perishable, and will
not prevent a directory that was removed on the source from being deleted on the
destination.
o An x indicates that a rule affects xattr names in xattr copy/delete operations (and
is thus ignored when matching file/dir names). If no xattr-matching rules are
specified, a default xattr filtering rule is used (see the --xattrs option).
MERGE-FILE FILTER RULES
You can merge whole files into your filter rules by specifying either a merge (.) or a
dir-merge (:) filter rule (as introduced in the FILTER RULES section above).
There are two kinds of merged files -- single-instance ('.') and per-directory (':'). A
single-instance merge file is read one time, and its rules are incorporated into the
filter list in the place of the "." rule. For per-directory merge files, rsync will scan
every directory that it traverses for the named file, merging its contents when the file
exists into the current list of inherited rules. These per-directory rule files must be
created on the sending side because it is the sending side that is being scanned for the
available files to transfer. These rule files may also need to be transferred to the
receiving side if you want them to affect what files don't get deleted (see PER-DIRECTORY
RULES AND DELETE below).
Some examples:
merge /etc/rsync/default.rules
. /etc/rsync/default.rules
dir-merge .per-dir-filter
dir-merge,n- .non-inherited-per-dir-excludes
:n- .non-inherited-per-dir-excludes
The following modifiers are accepted after a merge or dir-merge rule:
o A - specifies that the file should consist of only exclude patterns, with no other
rule-parsing except for in-file comments.
o A + specifies that the file should consist of only include patterns, with no other
rule-parsing except for in-file comments.
o A C is a way to specify that the file should be read in a CVS-compatible manner.
This turns on 'n', 'w', and '-', but also allows the list-clearing token (!) to be
specified. If no filename is provided, ".cvsignore" is assumed.
o A e will exclude the merge-file name from the transfer; e.g. "dir-merge,e .rules"
is like "dir-merge .rules" and "- .rules".
o An n specifies that the rules are not inherited by subdirectories.
o A w specifies that the rules are word-split on whitespace instead of the normal
line-splitting. This also turns off comments. Note: the space that separates the
prefix from the rule is treated specially, so "- foo + bar" is parsed as two rules
(assuming that prefix-parsing wasn't also disabled).
o You may also specify any of the modifiers for the "+" or "-" rules (above) in order
to have the rules that are read in from the file default to having that modifier
set (except for the ! modifier, which would not be useful). For instance,
"merge,-/ .excl" would treat the contents of .excl as absolute-path excludes, while
"dir-merge,s .filt" and ":sC" would each make all their per-directory rules apply
only on the sending side. If the merge rule specifies sides to affect (via the s
or r modifier or both), then the rules in the file must not specify sides (via a
modifier or a rule prefix such as hide).
Per-directory rules are inherited in all subdirectories of the directory where the merge-
file was found unless the 'n' modifier was used. Each subdirectory's rules are prefixed
to the inherited per-directory rules from its parents, which gives the newest rules a
higher priority than the inherited rules. The entire set of dir-merge rules are grouped
together in the spot where the merge-file was specified, so it is possible to override
dir-merge rules via a rule that got specified earlier in the list of global rules. When
the list-clearing rule ("!") is read from a per-directory file, it only clears the
inherited rules for the current merge file.
Another way to prevent a single rule from a dir-merge file from being inherited is to
anchor it with a leading slash. Anchored rules in a per-directory merge-file are relative
to the merge-file's directory, so a pattern "/foo" would only match the file "foo" in the
directory where the dir-merge filter file was found.
Here's an example filter file which you'd specify via --filter=". file":
merge /home/user/.global-filter
- *.gz
dir-merge .rules
+ *.[ch]
- *.o
- foo*
This will merge the contents of the /home/user/.global-filter file at the start of the
list and also turns the ".rules" filename into a per-directory filter file. All rules
read in prior to the start of the directory scan follow the global anchoring rules (i.e. a
leading slash matches at the root of the transfer).
If a per-directory merge-file is specified with a path that is a parent directory of the
first transfer directory, rsync will scan all the parent dirs from that starting point to
the transfer directory for the indicated per-directory file. For instance, here is a
common filter (see -F):
--filter=': /.rsync-filter'
That rule tells rsync to scan for the file .rsync-filter in all directories from the root
down through the parent directory of the transfer prior to the start of the normal
directory scan of the file in the directories that are sent as a part of the transfer.
(Note: for an rsync daemon, the root is always the same as the module's "path".)
Some examples of this pre-scanning for per-directory files:
rsync -avF /src/path/ /dest/dir
rsync -av --filter=': ../../.rsync-filter' /src/path/ /dest/dir
rsync -av --filter=': .rsync-filter' /src/path/ /dest/dir
The first two commands above will look for ".rsync-filter" in "/" and "/src" before the
normal scan begins looking for the file in "/src/path" and its subdirectories. The last
command avoids the parent-dir scan and only looks for the ".rsync-filter" files in each
directory that is a part of the transfer.
If you want to include the contents of a ".cvsignore" in your patterns, you should use the
rule ":C", which creates a dir-merge of the .cvsignore file, but parsed in a CVS-
compatible manner. You can use this to affect where the --cvs-exclude (-C) option's
inclusion of the per-directory .cvsignore file gets placed into your rules by putting the
":C" wherever you like in your filter rules. Without this, rsync would add the dir-merge
rule for the .cvsignore file at the end of all your other rules (giving it a lower
priority than your command-line rules). For example:
cat <<EOT | rsync -avC --filter='. -' a/ b
+ foo.o
:C
- *.old
EOT
rsync -avC --include=foo.o -f :C --exclude='*.old' a/ b
Both of the above rsync commands are identical. Each one will merge all the per-directory
.cvsignore rules in the middle of the list rather than at the end. This allows their dir-
specific rules to supersede the rules that follow the :C instead of being subservient to
all your rules. To affect the other CVS exclude rules (i.e. the default list of
exclusions, the contents of $HOME/.cvsignore, and the value of $CVSIGNORE) you should omit
the -C command-line option and instead insert a "-C" rule into your filter rules; e.g.
"--filter=-C".
LIST-CLEARING FILTER RULE
You can clear the current include/exclude list by using the "!" filter rule (as introduced
in the FILTER RULES section above). The "current" list is either the global list of rules
(if the rule is encountered while parsing the filter options) or a set of per-directory
rules (which are inherited in their own sub-list, so a subdirectory can use this to clear
out the parent's rules).
ANCHORING INCLUDE/EXCLUDE PATTERNS
As mentioned earlier, global include/exclude patterns are anchored at the "root of the
transfer" (as opposed to per-directory patterns, which are anchored at the merge-file's
directory). If you think of the transfer as a subtree of names that are being sent from
sender to receiver, the transfer-root is where the tree starts to be duplicated in the
destination directory. This root governs where patterns that start with a / match.
Because the matching is relative to the transfer-root, changing the trailing slash on a
source path or changing your use of the --relative option affects the path you need to use
in your matching (in addition to changing how much of the file tree is duplicated on the
destination host). The following examples demonstrate this.
Let's say that we want to match two source files, one with an absolute path of
"/home/me/foo/bar", and one with a path of "/home/you/bar/baz". Here is how the various
command choices differ for a 2-source transfer:
Example cmd: rsync -a /home/me /home/you /dest
+/- pattern: /me/foo/bar
+/- pattern: /you/bar/baz
Target file: /dest/me/foo/bar
Target file: /dest/you/bar/baz
Example cmd: rsync -a /home/me/ /home/you/ /dest
+/- pattern: /foo/bar (note missing "me")
+/- pattern: /bar/baz (note missing "you")
Target file: /dest/foo/bar
Target file: /dest/bar/baz
Example cmd: rsync -a --relative /home/me/ /home/you /dest
+/- pattern: /home/me/foo/bar (note full path)
+/- pattern: /home/you/bar/baz (ditto)
Target file: /dest/home/me/foo/bar
Target file: /dest/home/you/bar/baz
Example cmd: cd /home; rsync -a --relative me/foo you/ /dest
+/- pattern: /me/foo/bar (starts at specified path)
+/- pattern: /you/bar/baz (ditto)
Target file: /dest/me/foo/bar
Target file: /dest/you/bar/baz
The easiest way to see what name you should filter is to just look at the output when
using --verbose and put a / in front of the name (use the --dry-run option if you're not
yet ready to copy any files).
PER-DIRECTORY RULES AND DELETE
Without a delete option, per-directory rules are only relevant on the sending side, so you
can feel free to exclude the merge files themselves without affecting the transfer. To
make this easy, the 'e' modifier adds this exclude for you, as seen in these two
equivalent commands:
rsync -av --filter=': .excl' --exclude=.excl host:src/dir /dest
rsync -av --filter=':e .excl' host:src/dir /dest
However, if you want to do a delete on the receiving side AND you want some files to be
excluded from being deleted, you'll need to be sure that the receiving side knows what
files to exclude. The easiest way is to include the per-directory merge files in the
transfer and use --delete-after, because this ensures that the receiving side gets all the
same exclude rules as the sending side before it tries to delete anything:
rsync -avF --delete-after host:src/dir /dest
However, if the merge files are not a part of the transfer, you'll need to either specify
some global exclude rules (i.e. specified on the command line), or you'll need to maintain
your own per-directory merge files on the receiving side. An example of the first is this
(assume that the remote .rules files exclude themselves):
rsync -av --filter=': .rules' --filter='. /my/extra.rules'
--delete host:src/dir /dest
In the above example the extra.rules file can affect both sides of the transfer, but (on
the sending side) the rules are subservient to the rules merged from the .rules files
because they were specified after the per-directory merge rule.
In one final example, the remote side is excluding the .rsync-filter files from the
transfer, but we want to use our own .rsync-filter files to control what gets deleted on
the receiving side. To do this we must specifically exclude the per-directory merge files
(so that they don't get deleted) and then put rules into the local files to control what
else should not get deleted. Like one of these commands:
rsync -av --filter=':e /.rsync-filter' --delete \
host:src/dir /dest
rsync -avFF --delete host:src/dir /dest
TRANSFER RULES
In addition to the FILTER RULES that affect the recursive file scans that generate the
file list on the sending and (when deleting) receiving sides, there are transfer rules.
These rules affect which files the generator decides need to be transferred without the
side effects of an exclude filter rule. Transfer rules affect only files and never
directories.
Because a transfer rule does not affect what goes into the sender's (and receiver's) file
list, it cannot have any effect on which files get deleted on the receiving side. For
example, if the file "foo" is present in the sender's list but its size is such that it is
omitted due to a transfer rule, the receiving side does not request the file. However,
its presence in the file list means that a delete pass will not remove a matching file
named "foo" on the receiving side. On the other hand, a server-side exclude (hide) of the
file "foo" leaves the file out of the server's file list, and absent a receiver-side
exclude (protect) the receiver will remove a matching file named "foo" if deletions are
requested.
Given that the files are still in the sender's file list, the --prune-empty-dirs option
will not judge a directory as being empty even if it contains only files that the transfer
rules omitted.
Similarly, a transfer rule does not have any extra effect on which files are deleted on
the receiving side, so setting a maximum file size for the transfer does not prevent big
files from being deleted.
Examples of transfer rules include the default "quick check" algorithm (which compares
size & modify time), the --update option, the --max-size option, the --ignore-non-existing
option, and a few others.
BATCH MODE
Batch mode can be used to apply the same set of updates to many identical systems.
Suppose one has a tree which is replicated on a number of hosts. Now suppose some changes
have been made to this source tree and those changes need to be propagated to the other
hosts. In order to do this using batch mode, rsync is run with the write-batch option to
apply the changes made to the source tree to one of the destination trees. The write-
batch option causes the rsync client to store in a "batch file" all the information needed
to repeat this operation against other, identical destination trees.
Generating the batch file once saves having to perform the file status, checksum, and data
block generation more than once when updating multiple destination trees. Multicast
transport protocols can be used to transfer the batch update files in parallel to many
hosts at once, instead of sending the same data to every host individually.
To apply the recorded changes to another destination tree, run rsync with the read-batch
option, specifying the name of the same batch file, and the destination tree. Rsync
updates the destination tree using the information stored in the batch file.
For your convenience, a script file is also created when the write-batch option is used:
it will be named the same as the batch file with ".sh" appended. This script file
contains a command-line suitable for updating a destination tree using the associated
batch file. It can be executed using a Bourne (or Bourne-like) shell, optionally passing
in an alternate destination tree pathname which is then used instead of the original
destination path. This is useful when the destination tree path on the current host
differs from the one used to create the batch file.
Examples:
$ rsync --write-batch=foo -a host:/source/dir/ /adest/dir/
$ scp foo* remote:
$ ssh remote ./foo.sh /bdest/dir/
$ rsync --write-batch=foo -a /source/dir/ /adest/dir/
$ ssh remote rsync --read-batch=- -a /bdest/dir/ <foo
In these examples, rsync is used to update /adest/dir/ from /source/dir/ and the
information to repeat this operation is stored in "foo" and "foo.sh". The host "remote"
is then updated with the batched data going into the directory /bdest/dir. The
differences between the two examples reveals some of the flexibility you have in how you
deal with batches:
o The first example shows that the initial copy doesn't have to be local -- you can
push or pull data to/from a remote host using either the remote-shell syntax or
rsync daemon syntax, as desired.
o The first example uses the created "foo.sh" file to get the right rsync options
when running the read-batch command on the remote host.
o The second example reads the batch data via standard input so that the batch file
doesn't need to be copied to the remote machine first. This example avoids the
foo.sh script because it needed to use a modified --read-batch option, but you
could edit the script file if you wished to make use of it (just be sure that no
other option is trying to use standard input, such as the --exclude-from=- option).
Caveats:
The read-batch option expects the destination tree that it is updating to be identical to
the destination tree that was used to create the batch update fileset. When a difference
between the destination trees is encountered the update might be discarded with a warning
(if the file appears to be up-to-date already) or the file-update may be attempted and
then, if the file fails to verify, the update discarded with an error. This means that it
should be safe to re-run a read-batch operation if the command got interrupted. If you
wish to force the batched-update to always be attempted regardless of the file's size and
date, use the -I option (when reading the batch). If an error occurs, the destination
tree will probably be in a partially updated state. In that case, rsync can be used in
its regular (non-batch) mode of operation to fix up the destination tree.
The rsync version used on all destinations must be at least as new as the one used to
generate the batch file. Rsync will die with an error if the protocol version in the
batch file is too new for the batch-reading rsync to handle. See also the --protocol
option for a way to have the creating rsync generate a batch file that an older rsync can
understand. (Note that batch files changed format in version 2.6.3, so mixing versions
older than that with newer versions will not work.)
When reading a batch file, rsync will force the value of certain options to match the data
in the batch file if you didn't set them to the same as the batch-writing command. Other
options can (and should) be changed. For instance --write-batch changes to --read-batch,
--files-from is dropped, and the --filter / --include / --exclude options are not needed
unless one of the --delete options is specified.
The code that creates the BATCH.sh file transforms any filter/include/exclude options into
a single list that is appended as a "here" document to the shell script file. An advanced
user can use this to modify the exclude list if a change in what gets deleted by --delete
is desired. A normal user can ignore this detail and just use the shell script as an easy
way to run the appropriate --read-batch command for the batched data.
The original batch mode in rsync was based on "rsync+", but the latest version uses a new
implementation.
SYMBOLIC LINKS
Three basic behaviors are possible when rsync encounters a symbolic link in the source
directory.
By default, symbolic links are not transferred at all. A message "skipping non-regular"
file is emitted for any symlinks that exist.
If --links is specified, then symlinks are added to the transfer (instead of being noisily
ignored), and the default handling is to recreate them with the same target on the
destination. Note that --archive implies --links.
If --copy-links is specified, then symlinks are "collapsed" by copying their referent,
rather than the symlink.
Rsync can also distinguish "safe" and "unsafe" symbolic links. An example where this
might be used is a web site mirror that wishes to ensure that the rsync module that is
copied does not include symbolic links to /etc/passwd in the public section of the site.
Using --copy-unsafe-links will cause any links to be copied as the file they point to on
the destination. Using --safe-links will cause unsafe links to be omitted by the
receiver. (Note that you must specify or imply --links for --safe-links to have any
effect.)
Symbolic links are considered unsafe if they are absolute symlinks (start with /), empty,
or if they contain enough ".." components to ascend from the top of the transfer.
Here's a summary of how the symlink options are interpreted. The list is in order of
precedence, so if your combination of options isn't mentioned, use the first line that is
a complete subset of your options:
--copy-links
Turn all symlinks into normal files and directories (leaving no symlinks in the
transfer for any other options to affect).
--copy-dirlinks
Turn just symlinks to directories into real directories, leaving all other symlinks
to be handled as described below.
--links --copy-unsafe-links
Turn all unsafe symlinks into files and create all safe symlinks.
--copy-unsafe-links
Turn all unsafe symlinks into files, noisily skip all safe symlinks.
--links --safe-links
The receiver skips creating unsafe symlinks found in the transfer and creates the
safe ones.
--links
Create all symlinks.
For the effect of --munge-links, see the discussion in that option's section.
Note that the --keep-dirlinks option does not effect symlinks in the transfer but instead
affects how rsync treats a symlink to a directory that already exists on the receiving
side. See that option's section for a warning.
DIAGNOSTICS
Rsync occasionally produces error messages that may seem a little cryptic. The one that
seems to cause the most confusion is "protocol version mismatch -- is your shell clean?".
This message is usually caused by your startup scripts or remote shell facility producing
unwanted garbage on the stream that rsync is using for its transport. The way to diagnose
this problem is to run your remote shell like this:
ssh remotehost /bin/true > out.dat
then look at out.dat. If everything is working correctly then out.dat should be a zero
length file. If you are getting the above error from rsync then you will probably find
that out.dat contains some text or data. Look at the contents and try to work out what is
producing it. The most common cause is incorrectly configured shell startup scripts (such
as .cshrc or .profile) that contain output statements for non-interactive logins.
If you are having trouble debugging filter patterns, then try specifying the -vv option.
At this level of verbosity rsync will show why each individual file is included or
excluded.
EXIT VALUES
o 0 - Success
o 1 - Syntax or usage error
o 2 - Protocol incompatibility
o 3 - Errors selecting input/output files, dirs
o
o 4 - Requested action not supported. Either:
an attempt was made to manipulate 64-bit files on a platform that cannot
support them
o an option was specified that is supported by the client and not by the
server
o 5 - Error starting client-server protocol
o 6 - Daemon unable to append to log-file
o 10 - Error in socket I/O
o 11 - Error in file I/O
o 12 - Error in rsync protocol data stream
o 13 - Errors with program diagnostics
o 14 - Error in IPC code
o 20 - Received SIGUSR1 or SIGINT
o 21 - Some error returned by waitpid()
o 22 - Error allocating core memory buffers
o 23 - Partial transfer due to error
o 24 - Partial transfer due to vanished source files
o 25 - The --max-delete limit stopped deletions
o 30 - Timeout in data send/receive
o 35 - Timeout waiting for daemon connection
ENVIRONMENT VARIABLES
CVSIGNORE
The CVSIGNORE environment variable supplements any ignore patterns in .cvsignore
files. See the --cvs-exclude option for more details.
RSYNC_ICONV
Specify a default --iconv setting using this environment variable. First supported
in 3.0.0.
RSYNC_OLD_ARGS
Specify a "1" if you want the --old-args option to be enabled by default, a "2" (or
more) if you want it to be enabled in the repeated-option state, or a "0" to make
sure that it is disabled by default. When this environment variable is set to a
non-zero value, it supersedes the RSYNC_PROTECT_ARGS variable.
This variable is ignored if --old-args, --no-old-args, or --secluded-args is
specified on the command line.
First supported in 3.2.4.
RSYNC_PROTECT_ARGS
Specify a non-zero numeric value if you want the --secluded-args option to be
enabled by default, or a zero value to make sure that it is disabled by default.
This variable is ignored if --secluded-args, --no-secluded-args, or --old-args is
specified on the command line.
First supported in 3.1.0. Starting in 3.2.4, this variable is ignored if
RSYNC_OLD_ARGS is set to a non-zero value.
RSYNC_RSH
This environment variable allows you to override the default shell used as the
transport for rsync. Command line options are permitted after the command name,
just as in the --rsh (-e) option.
RSYNC_PROXY
This environment variable allows you to redirect your rsync client to use a web
proxy when connecting to an rsync daemon. You should set RSYNC_PROXY to a
hostname:port pair.
RSYNC_PASSWORD
This environment variable allows you to set the password for an rsync daemon
connection, which avoids the password prompt. Note that this does not supply a
password to a remote shell transport such as ssh (consult its documentation for how
to do that).
USER or LOGNAME
The USER or LOGNAME environment variables are used to determine the default
username sent to an rsync daemon. If neither is set, the username defaults to
"nobody". If both are set, USER takes precedence.
RSYNC_PARTIAL_DIR
This environment variable specifies the directory to use for a --partial transfer
without implying that partial transfers be enabled. See the --partial-dir option
for full details.
RSYNC_COMPRESS_LIST
This environment variable allows you to customize the negotiation of the
compression algorithm by specifying an alternate order or a reduced list of names.
Use the command rsync --version to see the available compression names. See the
--compress option for full details.
RSYNC_CHECKSUM_LIST
This environment variable allows you to customize the negotiation of the checksum
algorithm by specifying an alternate order or a reduced list of names. Use the
command rsync --version to see the available checksum names. See the --checksum-
choice option for full details.
RSYNC_MAX_ALLOC
This environment variable sets an allocation maximum as if you had used the --max-
alloc option.
RSYNC_PORT
This environment variable is not read by rsync, but is instead set in its sub-
environment when rsync is running the remote shell in combination with a daemon
connection. This allows a script such as rsync-ssl to be able to know the port
number that the user specified on the command line.
HOME This environment variable is used to find the user's default .cvsignore file.
RSYNC_CONNECT_PROG
This environment variable is mainly used in debug setups to set the program to use
when making a daemon connection. See CONNECTING TO AN RSYNC DAEMON for full
details.
RSYNC_SHELL
This environment variable is mainly used in debug setups to set the program to use
to run the program specified by RSYNC_CONNECT_PROG. See CONNECTING TO AN RSYNC
DAEMON for full details.
FILES
/etc/rsyncd.conf or rsyncd.conf
SEE ALSO
rsync-ssl(1), rsyncd.conf(5), rrsync(1)
BUGS
o Times are transferred as *nix time_t values.
o When transferring to FAT filesystems rsync may re-sync unmodified files. See the
comments on the --modify-window option.
o File permissions, devices, etc. are transferred as native numerical values.
o See also the comments on the --delete option.
Please report bugs! See the web site at https://rsync.samba.org/.
VERSION
This manpage is current for version 3.2.7 of rsync.
INTERNAL OPTIONS
The options --server and --sender are used internally by rsync, and should never be typed
by a user under normal circumstances. Some awareness of these options may be needed in
certain scenarios, such as when setting up a login that can only run an rsync command.
For instance, the support directory of the rsync distribution has an example script named
rrsync (for restricted rsync) that can be used with a restricted ssh login.
CREDITS
Rsync is distributed under the GNU General Public License. See the file COPYING for
details.
An rsync web site is available at https://rsync.samba.org/. The site includes an FAQ-O-
Matic which may cover questions unanswered by this manual page.
The rsync github project is https://github.com/WayneD/rsync.
We would be delighted to hear from you if you like this program. Please contact the
mailing-list at rsync@lists.samba.org.
This program uses the excellent zlib compression library written by Jean-loup Gailly and
Mark Adler.
THANKS
Special thanks go out to: John Van Essen, Matt McCutchen, Wesley W. Terpstra, David
Dykstra, Jos Backus, Sebastian Krahmer, Martin Pool, and our gone-but-not-forgotten
compadre, J.W. Schultz.
Thanks also to Richard Brent, Brendan Mackay, Bill Waite, Stephen Rothwell and David Bell.
I've probably missed some people, my apologies if I have.
AUTHOR
Rsync was originally written by Andrew Tridgell and Paul Mackerras. Many people have
later contributed to it. It is currently maintained by Wayne Davison.
Mailing lists for support and development are available at https://lists.samba.org/.